KOH-Activated Hollow ZIF-8 Derived Porous Carbon: Nanoarchitectured Control for Upgraded Capacitive Deionization and Supercapacitor

Multiporous ZIF-8 carbon/cellulose composite beads: Highly efficient and scalable adsorbents for water treatment

Metal-organic framework (MOF) particles are one of the most promising adsorbents for removing organic contaminants from wastewater. However, powder-type MOF particles face challenges in terms of utilization and recovery. In this study, a novel bead-type adsorbent was prepared using activated carbon based on the zeolitic imidazolate framework-8 (AC-ZIF-8) and a regenerated cellulose hydrogel for dye removal. AC-ZIF-8 particles with a large surface area were obtained by carbonization and chemical activation with KOH. The AC-ZIF-8 powders were efficiently immobilized in hydrophilic cellulose hydrogel beads via cellulose dissolution/regeneration. The prepared AC-ZIF-8/cellulose hydrogel (AC-ZIF-8/CH) composite beads exhibit a large specific surface area of 1412.8 m2/g and an excellent maximum adsorption capacity of 565.13 mg/g for Rhodamine B (RhB). Moreover, the AC-ZIF-8/CH beads were effective over a wide range of pH, temperatures and for different types of dyes. These composite beads also offer economic benefits through desorption of dyes for recycling. The AC-ZIF-8/CH beads can be produced in substantial amounts and used as fillers in a fixed-bed column system, which can purify the continuous inflow of dye solutions. These findings suggest that our simple approach for preparing high-performance adsorbent beads will broaden the application of dye adsorbents, oil-water separation, and catalysts.

Multiplex signal amplification for ultrasensitive CRP assay via integrated electrochemical biosensor array using MOF-derived carbon material and aptamers

Accurate and precise detection of disease-associated proteins, such as C-reactive protein (CRP), remains a challenge in biosensor development. Herein, we present a novel approach－an integrated disposable aptasensor array－designed for precise, ultra-sensitive, and parallel detection of CRP in plasma samples. This integrated biosensing array platform enables multiplex parallel testing, ensuring the accuracy and reliability in sample analysis. The ultra-sensitivity of this biosensor is achieved through multiplex signal amplification. Leveraging the superior conductivity and extensive surface area of MOF-derived nanoporous carbon material (CMOF), the biosensor enhances recognition elements (aptamers) by catalyzing the horseradish peroxidase (HRP) label enzyme reaction to multiply the number of probe molecules. Optimized conditions yielded exceptional performance, exhibiting high accuracy (relative standard deviation, RSD≤10.0 %), a low detection limit (0.3 pg/mL, S/N = 3), ultra-sensitivity (0.16 μA/ng mL-1 mm-2), and a rapid response (seven parallel tests within 60 min). Importantly, this multi-unit integrated disposable aptasensor array accurately quantified CRP in human serum, demonstrating comparable results to commercial enzyme-linked immunosorbent assay (ELISA). This technology showcases promise for detecting various biomarkers using a unified approach, presenting an appealing strategy for early disease diagnosis and biological analysis.

Surfactant-Free, Size-Controllable, and Scalable Green Synthesis of ZIF-8 Particles with Narrow Size Distribution by Tuning Key Reaction Parameters in Water Solvent

The chemical/physical properties and reliable performance of nanoporous materials are strongly influenced by the particle size and corresponding distribution. Among many types of MOFs, ZIF-8, is still widely used and many studies have been conducted to control the particle size and uniformity of ZIF-8 using surfactants and organic solvents. However, the use of surfactants and organic solvents process is expensive and may cause environmental pollution. For the first time, in this paper, a surfactant-free, size-controllable, and scalable green synthesis method of ZIF-8 particles is reported using four reaction parameters (temperature, concentration, pouring time, and reactant ratio) that affect the formation of nuclei and growth of ZIF-8 crystals. The as-synthesized ZIF-8 nanoparticles show great uniformity and controllable particle sizes in the wide range of 147-915 nm. In addition, a 2 L large-scale synthesis of ZIF-8 with narrow size distribution is developed by finely tuned particle size in water without any additives. To demonstrate the efficient utilization of nanopores according to the particle size and size distribution, an adsorption test is conducted on the ZIF-8 nanoparticles. This study will support the synthesis of size-controlled ZIF-8 with narrow size distribution and their composites for achieving high performance in the emerging applications.

Hierarchical Porous N-Doped Carbon Particles Derived from ZIF-8 as Highly Efficient H2S Selective Oxidation Catalysts

In the selective oxidation of H2S, the catalytic activity over N-doped carbon-based catalysts is significantly influenced by the accessibility of active sites and the mass transfer rates of reactant molecules (e.g., H2S and O2) as well as generated sulfur monomers. Therefore, it is crucial for enhancing the initial performance via the controlled synthesis of carbon-based catalysts with highly exposed active sites and unique porous structures. Herein, we reported on an efficient strategy to synthesize nanosized N-doped carbon particles with hierarchical porous structures by directly pyrolyzing an oversaturated NaCl-encapsulated ZIF-8 precursor mixture. The introduction of NaCl not only serves as a pollution-free template to promote the formation of graphitic carbon layers but also acts as an intercalating agent to guide the derivation of hierarchical porous structures, as well as enhances the amount of active nitrogen species in the catalysts. As a result, the as-prepared H-NC800 catalyst shows excellent H2S selective oxidation performance (sulfur formation rate is 794 gsulfur·kgcat-1·h-1), good stability (>80 h), and antiwater vapor properties. The characterization results and DFT calculations indicate the crucial role of pyridinic N in the adsorbing and activating reactant molecules (H2S, O2). Furthermore, nanoscale N-doped carbon particles accelerated the rapid transport of generated sulfur monomers under a hierarchical porous structure. This investigation introduces a distinctive strategy for synthesizing ZIF-8-derived N-doped carbon nanosized with a hierarchical porous structure, while its efficient and stable H2S selective oxidation performance highlights significant potential for practical implementation in the industrial desulfurization process.

Gallic acid-loaded HFZIF-8 for tumor-targeted delivery and thermal-catalytic therapy

"Transition" metal-coordinated plant polyphenols are a type of promising antitumor nanodrugs owing to their high biosafety and catalytic therapy potency; however, the major obstacle restricting their clinical application is their poor tumor accumulation. Herein, Fe-doped ZIF-8 was tailored using tannic acid (TA) into a hollow mesoporous nanocarrier for gallic acid (GA) loading. After hyaluronic acid (HA) modification, the developed nanosystem of HFZIF-8/GA@HA was used for the targeted delivery of Fe ions and GA, thereby intratumorally achieving the synthesis of an Fe-GA coordinated complex. The TA-etching strategy facilitated the development of a cavitary structure and abundant coordination sites of ZIF-8, thus ensuring an ideal loading efficacy of GA (23.4 wt%). When HFZIF-8/GA@HA accumulates in the tumor microenvironment (TME), the framework is broken due to the competitive protonation ability of overexpressed protons in the TME. Interestingly, the intratumoral degradation of HFZIF-8/GA@HA provides the opportunity for the in situ "meeting" of GA and Fe ions, and through the coordination of polyhydroxyls assisted by conjugated electrons on the benzene ring, highly stable Fe-GA nanochelates are formed. Significantly, owing to the electron delocalization effect of GA, intratumorally coordinated Fe-GA could efficiently absorb second near-infrared (NIR-II, 1064 nm) laser irradiation and transfer it into thermal energy with a conversion efficiency of 36.7%. The photothermal performance could speed up the Fenton reaction rate of Fe-GA with endogenous H2O2 for generating more hydroxyl radicals, thus realizing thermally enhanced chemodynamic therapy. Overall, our research findings demonstrate that HFZIF-8/GA@HA has potential as a safe and efficient anticancer nanodrug.

Enhanced Selective Electrosorption of Nitrate from Wastewater by Controllably Doping Nitrogen into Porous Carbon with Micropores

The biological NO3- removal process might be accompanied by high CO2 emissions and operation costs. Capacitive deionization (CDI) has been widely studied as a very efficient method to purify water. Here, a porous carbon material with a tunable nitrogen configuration was developed. Characterization and density functional theory calculation show that nitrogenous functional groups have a higher NO3- binding energy than Cl-, SO42-, and H2PO4-. In addition, the selectivity of NO3- is improved after the introduction of micropores by using the pore template. The NO3- ion removal and selectivity of MN-C-12 are 4.57 and 3.46-5.42 times that of activated carbon (AC), respectively. The high NO3- selectivity and electrosorption properties of MN-C-12 (the highest N content and micropore area) are due to the synergistic effect of the affinity of nitrogen functional groups to NO3- and microporous ion screening. A CDI unit for the removal of nitrogen from municipal wastewater was constructed and applied to treat wastewater meeting higher discharge standards of A (N: 15 mg L-1) and B (N: 20 mg L-1) ((GB18918-2002), China). This work provides new insights into enhanced carbon materials for the selective electrosorption of wastewater by CDI technology.

Acidified Nitrogen Self-Doped Porous Carbon with Superprotonic Conduction for Applications in Solid-State Proton Battery

Solid proton electrolytes play a crucial role in various electrochemical energy storage and conversion devices. However, the development of fast proton conducting solid proton electrolytes at ambient conditions remains a significant challenge. In this study, a novel acidified nitrogen self-doped porous carbon material is presented that demonstrates exceptional superprotonic conduction for applications in solid-state proton battery. The material, designated as MSA@ZIF-8-C, is synthesized through the acidification of nitrogen-doped porous carbon, specifically by integrating methanesulfonic acid (MSA) into zeolitic imidazolate framework-derived nitrogen self-doped porous carbons (ZIF-8-C). This study reveals that MSA@ZIF-8-C achieves a record-high proton conductivity beyond 10-2  S cm-1 at ambient condition, along with good long-term stability, positioning it as a cutting-edge alternative solid proton electrolyte to the default aqueous H2 SO4 electrolyte in proton batteries.

Hollow mesoporous carbon supported Co-modified Cu/Cu2O electrocatalyst for nitrate reduction reaction

The electroreduction of nitrate (NO3-) pollutants to ammonia (NH3) provides a sustainable approach for both wastewater treatment and NH3 synthesis. However, electroreduction of nitrate requires multi-step electron and proton transfer, resulting in a sluggish reaction rate. Herein, we synthesized a Co-modified Cu/Cu2O catalyst supported on hollow mesoporous carbon substrates (Co/Cu/Cu2O-MesoC) by a one-step microwave-assisted reduction method. At -0.25 V vs. reversible hydrogen electrode (RHE), Co/Cu/Cu2O-MesoC shows a Faradaic efficiency (FE) of 100 ± 1% in 0.1 M NO3-. Notably, the maximum NH3 yield rate (YieldNH3) reaches 6.416 ± 0.78 mmol mgcat-1h-1 at -0.45 V vs. RHE, which is much better than most of the previous reports. Electrochemical evaluation and in-situ Fourier transform infrared (FTIR) spectroscopy reveal that the addition of Co could promote water electrolysis, and the generated H* is involved in the following hydrogenation of intermediates, ultimately leading to faster kinetics and energetics during electrocatalytic conversion of NO3- to NH3. This synergetic electrocatalysis strategy opens a new avenue for the development of high-activity, selectivity, and stability catalysts.

Ultrasensitive electrochemical sensing of catechol and hydroquinone via single-atom nanozyme anchored on MOF-derived porous carbon

Single-atom nanozymes (SANs) can significantly enhance the sensitivity and selectivity of electrochemical sensing platforms due to the homogeneity of their active sites, full atom utilization, and high catalytic activity. In this study, we demonstrate the synthesis and characterization of a high-density Co-based single-atom nanozyme anchored on activated MOF-derived porous carbon (Co-AcNC-3) via a cascade anchoring strategy for ultrasensitive, simultaneous electrochemical detection of catechol (CC) and hydroquinone (HQ). The Co-AcNC-3 displays a large specific surface area, high defectivity, and abundant oxygen-containing groups, with Co atoms being atomically dispersed throughout the carbon support via Co-N bonds. The Co-AcNC-3 biosensor exhibits superior electrochemical signals for CC and HQ, with linear ranges of 4.0 μM-300.0 μM. and detection limits of 0.072 μM and 0.034 μM, respectively. Moreover, the Co-AcNC-3 biosensor has shown excellent performance in accurately detecting CC and HQ in actual samples. Our findings highlight the potential of the proposed Co-AcNC-3 biosensor as a reliable and promising sensing platform for determining CC and HQ.

Synthesis of millimeter-scale ZIF-8 single crystals and their reversible crystal structure changes

Among various metal-organic frameworks (MOFs), the zeolitic imidazole framework (ZIF), constructed by the regular arrangement of 2-methylimidazole and metal ions, has garnered significant attention due to its distinctive crystals and pore structures. Variations in the sizes and shapes of ZIF crystals have been reported by changing the synthesis parameters, such as the molar ratios of organic ligands to metal ions, choice of solvents, and temperatures. Nonetheless, the giant ZIF-8 single crystals beyond the typical range have rarely been reported. Herein, we present the synthesis of millimeter-scale single crystal ZIF-8 using the solvothermal method in N,N-diethylformamide. The resulting 1-mm single crystal is carefully characterized through N2 adsorption-desorption isotherms, scanning electron microscopy, and other analytical techniques. Additionally, single-crystal X-ray diffraction is employed to comprehensively investigate the framework's mobility at various temperatures.

Mesoporous dopamine-modified leaf-like zeolitic imidazolate frameworks derived carbon for efficient capacitive deionization

The onstruction of novel porous carbon materials for efficient desalination is crucial but remains challenging for capacitive deionization (CDI) development. Herein, a micelle-assisted strategy was raised to coat mesoporous polydopamine (mPDA) on the surface of two-dimensional (2D) leaf-like zeolitic imidazolate frameworks (ZIFL) followed by confinement pyrolysis. The introduction of the mPDA layer can not only mitigate the backbone collapse of ZIFL during pyrolysis to build a favorable porous environment for efficient ion transport and diffusion, but also induce explosive growth of carbon nanotubes (CNTs) to improve the electron conductivity. As expected, the derivative ZIFL@mPDA-C possessed a high desalination capacity of 41.9 mg g-1 in 500  mg L-1 NaCl solution at an operating voltage of 1.2 V. In particular, the retention ratio of the desalination capacity of ZIFL@mPDA-C was about 100 % after 50 consecutive adsorption-desorption cycles, while its leaf-like morphology and hierarchical pore structures were well preserved. This study highlights the importance of rationally designed structures and components for the performance breakthrough of carbon-based CDI electrode materials.

Aromatic biomass (torch ginger) leaf-derived three-dimensional honeycomb-like carbon to enhance gravimetric supercapacitor

BACKGROUND

Porous carbon electrode (PCE) is identified as a highly suitable electrode material for commercial application due to its production process, which is characterized by simplicity, cost-effectiveness and environmental friendliness. PCE was synthesized using torch ginger (Etlingera elatior (Jack) R.M. Smith) leaves as the base material. The leaves were treated with different concentrations of ZnCl2 , resulting in a supercapacitor cell electrode with unique honeycomb-like three-dimensional (3D) morphological pore structure. This PCE comprises nanofibers from lignin content and volatile compounds from aromatic biomass waste.

RESULTS

From the characterization of physical properties, PCE-0.3 had an impressive amorphous porosity, wettability and 3D honeycomb-like structural morphology with a pore framework consisting of micropores and mesopores. According to the structural advantages of 3D hierarchical pores such as interconnected honeycombs, PCE-0.3 as supercapacitor electrode had a high specific capacitance of up to 285.89 F g-1 at 1 A. Furthermore, the supercapacitor exhibited high energy and power density of 21.54 Wh kg-1 and 161.13 W kg-1 , respectively, with a low internal resistance of 0.059 Ω.

CONCLUSION

The results indicated that 3D porous carbon materials such as interconnected honeycombs derived from the aromatic biomass of torch ginger leaves have significant potential for the development of sustainable energy storage devices. © 2023 Society of Chemical Industry.

Nitric Oxide Detection Using a Corona Phase Molecular Recognition Site on Chiral Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (s-SWCNT) are structures that fluoresce in the near-infrared region. By coating SWCNT surfaces with polymeric materials such as single-chain DNA, changes in fluorescence emission occur in the presence of reagents. In this way, polymer-coated SWCNT structures allow them to be used as optical sensors for single molecule detection. Especially today, the inadequacy of the methods used in the detection of cellular molecules makes the early diagnosis of diseases such as cancer difficult at the single-molecule level. In this study, the detection of nitric oxide (NO) signals, which are a marker of cancer, was carried out at the single-molecule level. In this context, a sensor structure was formed by coating the 7,6-chiral s-SWCNT surface with ssDNA with different oligonucleotide lengths (AT). The sensor structure was characterized by using UV-vis spectroscopy and Raman spectroscopy microscopy. After formation of the sensor structure, a selectivity library was created using various molecules. As a result of the coating of the SWCNT (7,6) surface with DNA corona phase formation, Raman peaks at 195 and 276 cm-1 were observed to shift to the right. Additionally, the selectivity library results showed that the (AT)30 sequence can be used in NO detection. As a result of the studies using SWCNT (7.6)- (AT)30, the limit of detection (LOD) and limit of determination (LOQ) values of the sensor against NO were found to be 1.24 and 4.13 μM, respectively.

Hollow spherical Mn0.5Zn0.5Fe2O4 nanoparticles with a magnetic vortex configuration for enhanced magnetic hyperthermia efficacy

Conventional magnetic nanoagents in cancer hyperthermia therapy suffer from a low magnetic heating efficiency. To address this issue, researchers have pursued magnetic nanoparticles with topological magnetic domain structures, such as the vortex-domain structure, to enhance the magnetic heating performance of conventional nanoparticles while maintaining excellent biocompatibility. In this study, we synthesized hollow spherical Mn0.5Zn0.5Fe2O4 (MZF-HS) nanoparticles using a straightforward solvothermal method, yielding samples with an average outer diameter of approximately 350 nm and an average inner diameter of about 220 nm. The heating efficiency of the nanoparticles was experimentally verified, and the specific absorption rate (SAR) value of the hollow MZF was found to be approximately 1.5 times that of solid MZF. The enhanced heating performance is attributed to the vortex states in the hollow MZF structure as validated with micromagnetic simulation studies. In vitro studies demonstrated the lower cell viability of breast cancer cells (MCF-7, BT549, and 4T1) after MHT in the presence of MZF-HS. The synthesized MZF caused 51% cell death after MHT, while samples of MZF-HS resulted in 77% cell death. Our findings reveal that magnetic particles with a vortex state demonstrate superior heating efficiency, highlighting the potential of hollow spherical particles as effective heat generators for MHT applications.

Enhancing the bifunctional oxygen reduction and evolution activity of CoNC by introducing a trace amount of Fe

The potential application of zinc air batteries to tackle the energy shortage and environmental crisis has proposed new requirements of bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Utilizing the special spatial structure of zeolitic imidazolate framework-67 (ZIF-67) as an ideal research platform, the effect of a trace amount of Fe on the composition and structure of as-obtained Fe-CoNC catalysts was investigated. It was revealed that, due to the increased exposed pore structure and metal species located at the near surface, the active sites for the ORR/OER on Fe-CoNC are highly exposed, greatly boosting the activity to the reduction and evolution of oxygen in alkaline media. ZABs with Fe-CoNC have the highest maximum power density of 200 mW cm-2 when operated at current densities as high as 328 mA cm-2, better than not only Fe-free CoNC, but also precious metal-based references with the same catalyst loading.

A mini review on metal-organic framework-based electrode materials for capacitive deionization

Capacitive deionization (CDI) is an electrochemical method of extracting ions from solution at potentials below electrolysis. It has various applications ranging from water remediation and desalination to heavy metal removal and selective resource recovery. A CDI device applies an electrical charge across two porous electrodes to attract and remove ions without producing waste products. It is generally considered environmentally friendly and promising for sustainability, yet ion removal efficiency still falls short of more established filtration methods. Commercially available activated carbon is typically used for CDI, and its ion adsorption capacity is low at approximately 20-30 mg g-1. Recently, much interest has been in the highly porous and well-structured family of materials known as metal-organic frameworks (MOFs). Most MOFs are poor conductors of electricity and cannot be directly used to make electrodes. A common workaround is to pyrolyze the MOF to convert its organic components to carbon while maintaining its underlying microstructure. However, most MOF-derived materials only retain partial microstructure after pyrolysis and cannot inherit the robust porosity of the parent MOFs. This review provides a systematic breakdown of structure-performance relationships between a MOF-derived material and its CDI performance based on recent works. This review also serves as a starting point for researchers interested in developing MOF-derived materials for CDI applications.

Multiscale Porous Carbon Materials by In Situ Growth of Metal-Organic Framework in the Micro-Channel of Delignified Wood for High-Performance Water Purification

Porous carbon materials are suitable as highly efficient adsorbents for the treatment of organic pollutants in wastewater. In this study, we developed multiscale porous and heteroatom (O, N)-doped activated carbon aerogels (CAs) based on mesoporous zeolitic imidazolate framework-8 (ZIF-8) nanocrystals and wood using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidation, in situ synthesis, and carbonization/activation. The surface carboxyl groups in a TEMPO-oxidized wood (TW) can provide considerably large nucleation sites for ZIF-8. Consequently, ZIF-8, with excellent porosity, was successfully loaded into the TW via in situ growth to enhance the specific surface area and enable heteroatom doping. Thereafter, the ZIF-8-loaded TW was subjected to a direct carbonization/activation process, and the obtained activated CA, denoted as ZIF-8/TW-CA, exhibited a highly interconnected porous structure containing multiscale (micro, meso, and macro) pores. Additionally, the resultant ZIF-8/TW-CA exhibited a low density, high specific surface area, and excellent organic dye adsorption capacity of 56.0 mg cm-3, 785.8 m2 g-1, and 169.4 mg g-1, respectively. Given its sustainable, scalable, and low-cost wood platform, the proposed high-performance CA is expected to enable the substantial expansion of strategies for environmental protection, energy storage, and catalysis.

Mixed solvent-assisted synthesis of high mass loading amorphous NiCo-MOF as a promising electrode material for supercapacitors

The pursuit of high mass loading metal-organic framework (MOF) materials via a simple method is crucial to achieve high-performance supercapacitors. Herein, an amorphous NiCo-MOF material with a high mass loading of up to 10.3 mg cm-2 was successfully prepared using a mixed solvent system of ethanol and water. In addition, by adjusting the volume ratio of ethanol to water, amorphous NiCo-MOFs with three different morphologies including nanospheres, nanopores, and ultra-thick plates were obtained. It was found that the different solvent systems not only affected the growth rate of MOFs, but also controlled their nucleation rate by changing the coordination environment of the metal ions, and thus achieved morphology and mass loading regulation, thereby influencing their energy storage behavior. Notably, the optimum NiCo-MOF exhibited the superior specific capacitance of up to 9.7 F cm-2 (941.8 F g-1) at a current density of 5 mA cm-2 and high-rate capability of 71.1% even at 20 mA cm-2. Moreover, the corresponding assembled solid-state supercapacitor exhibited an excellent energy density of 0.65 mW h cm-2 at a power density of 2 mW cm-2 and capacity retention of 84.7% after 8000 cycles at 30 mA cm-2. Overall, this work proposes a feasible and effective strategy to achieve high mass loading NiCo-MOFs, impacting their ultimate electrochemical performance, which can possibly be further extended to other MOFs with superior capacitance.

Unraveling the Ion Uptake Capacitive Deionization of Sea- and Highly Saline-Water by Sulfur and Nitrogen Co-Doped Porous Carbon Modified with Molybdenum Sulfide

In parallel to the depletion of potable water reservoirs, novel technologies have been developed for seawater softening, as it is the most abundant source for generating deionized water. Although salt removal at subosmotic pressures and ambient temperatures by applying low-operating potentials with high energy efficiency made capacitive deionization (CDI) an advantageous water-softening process, its practical application is limited by insufficient ion removal capacity and low concentration influent. The performance of a CDI system is in progress with engineering the electrode active materials, also facilitating the advance design in highly saline- and seawater study. Herein, an innovative strategy was developed to provide high-performance CDI systems based on efficient and electrochemical ion-uptake active materials with a simple initial preparation. Nitrogen-doped porous carbons (N-pCs) received benefits from a high specific surface area and good surface wettability. The N-pCs were modified with molybdenum oxide/sulfide intercalative array and developed as CDI electrode active materials for desalination of both low/medium saline- and seawater. The MoS2/S,N-pC electrode materials exhibited perfect optimized salt adsorption capacity (SACs) of 47.9 mg g-1 when compared to N-pC (37.9 mg g-1) and MoO3/N-pC (39.6 mg g-1) counterparts at 1.4 V in a 750 ppm NaCl solution. In addition, the assembled CDI cells exhibited reasonable cycle stability and retained 96.7% of their initial SAC in continuous CDI cycles for 128,000 s. The fabricated CDI cell rendered an excellent salt removal efficiency (SRE, %) of 13.34% from the real seawater sample at 1.2 V. In detail, the SRE % of the NaCl, KCl, MgCl2, and CaCl2 soluble salts with respect to seawater sample exhibited a remarkable SRE % of 30.8%, 36%, 32.6%, and 19.3%, respectively. These SRE % values (>13.34%) provide convincing evidence on the reasonable ion uptake capability of the fabricated CDI cells for removing Na+, K+, Mg2+, and Ca2+ ions compared to other soluble component. The advanced cell design parallel to the promising outcomes provided herein makes these CDI systems immensely propitious for efficient water softening.

Tailoring B, N-Enriched Carbon Nanosheets via a Gelation-Assisted Strategy for High-Capacity and Fast-Response Capacitive Desalination

Designing high-performance carbonous electrodes for capacitive deionization with remarkable salt adsorption capacity (SAC) and outstanding salt adsorption rate (SAR) is quite significant yet challenging for brackish water desalination. Herein, a unique gelation-assisted strategy is proposed to tailor two-dimensional B and N-enriched carbon nanosheets (BNCTs) for efficient desalination. During the synthesis process, boric acid and polyvinyl alcohol were cross-linked to form a gelation template for the carbon precursor (polyethyleneimine), which endows BNCTs with ultrathin thickness (∼2 nm) and ultrahigh heteroatoms doping level (14.5 atom % of B and 14.8 atom % of N) after freeze-drying and pyrolysis. The laminar B, N-doped carbon enables an excellent SAC of 42.5 mg g-1 and fast SAR of 4.25 mg g-1 min-1 in 500 mg L-1 NaCl solution, both of which are four times as much as those of activated carbon. Moreover, the density functional theory (DFT) calculation demonstrates that the dual doping of B and N atoms firmly enhances the adsorption capacity of Na+, leading to a prominent chemical SAC for brackish water. This work paves a new way to rationally integrate both conducive surface morphology and systematic effects of B, N doping to construct high-efficiency carbonaceous electrodes for desalination.

A Ni-doped Mo2C/NCF composite for efficient electrocatalytic hydrogen evolution

Ni-Mo₂C nano catalysts dispersed on N-doped carbon flowers: a composite with nitrogen-containing carbon flowers carrying nickel-modified molybdenum carbide exhibits enhanced HER catalytic activity in alkaline electrolyte.

Selective degradation of organic micropollutants by activation of peroxymonosulfate by Se@NC: Role of Se doping and nonradical pathway mechanism

In this study, Se@NC-x decorated with Se was successfully prepared via two-step calcination with zeolitic imidazole framework (ZIF) as a precursor. Mechanistic studies show that PMS would be adsorbed onto the surface of Se@NC-900 to form an active complex (Se@NC-900/PMS*), and the active Se@NC-900/PMS* could oxidize phenol by the rapid decomposition of PMS. Specifically, electrons are extracted by Se@NC-900/PMS* and then transferred to the surface of Se@NC-900, which can trigger the degradation of phenol. Notably, it is found that the local charge redistribution caused by the doping of Se can activate the catalytic potential of the intrinsically inert carbon skeleton through density flooding theory (DFT) calculations. The XLogP, ΔE, VIP, and E_{LUMO (Se@NC/PMS)-HOMO (pollutants)} and degradation rate constants of different micropollutants were correlated well linearly. This indicates that the Se@NC-900/PMS system has a great selectivity for the degradation of pollutants. Overall, these findings not only illustrate the role of Se in tuning the electronic structure of Se@NC-x to enhance the activation of PMS, but also bridge the gap in our knowledge about the physicochemical properties and degradation performance of Se@NC catalysts.

Space-Confined Metal Ion Strategy for Carbon Materials Derived from Cobalt Benzimidazole Frameworks with High Desalination Performance in Simulated Seawater

Various metal ions with different valence states (Mg²⁺ , Al³⁺ , Ca²⁺ , Ti⁴⁺ , Mn²⁺ , Fe³⁺ , Ni²⁺ , Zn²⁺ , Pb²⁺ , Ba²⁺ , Ce⁴⁺ ) are successfully confined in quasi-microcube shaped cobalt benzimidazole frameworks using a space-confined synthesis strategy. More importantly, a series of derived carbon materials that confine metal ions are obtained by high-temperature pyrolysis. Interestingly, the derived carbon materials exhibited electric double-layer and pseudocapacitance properties because of the presence of metal ions with various valence states. Moreover, the presence of additional metal ions within carbon materials may create new phases, which can accelerate Na⁺ insertion/extraction and thus increase electrochemical adsorption. Density functional theory results showed that carbon materials in which Ti ions are confined exhibit enhanced insertion/extraction of Na⁺ resulting from the presence of the characteristic anatase crystalline phases of TiO₂ . The Ti-containing materials have an impressive desalination capacity (62.8 mg g^-1 ) in capacitive deionization (CDI) applications with high cycling stability. This work provides a facile synthetic strategy for the confinement of metal ions in metal-organic frameworks and thus supports the further development of derived carbon materials for seawater desalination by CDI.

Critical role of Photo-electrode with Ce-g-C3N4 in multi-stage microbial fuel cells cascade reactor treating diluted hyper-saline industrial wastewater rich in amines

Treatment of chemical industrial wastewater often faces problems of large volume occupation, high cost, and long processing time. In this study, low-content Ce-modified g-C₃N₄ was prepared and used as a catalyst on stainless steel mesh photo-cathode in constructing a multi-stage cascade microbial fuel cell system to reduce treatment costs in an energy-saving way. The large specific surface area (332.5 m² g^-1) and mesoporous structure of the material, is favorable for catalytic reactions, in which Ce elements were mainly present in single atoms. The characterized catalyst indicated a pronounced effect of Ce species in increasing photo-current and the synergistic pollutant removal, microbial bio-degradation and cascade operation stability. In Batch-mode (light illumination, aeration, total HRT (hydraulic residence time) of 54 h) treatment through three cascade reactors, removed 88% COD (Chemical Oxygen Demand). With 0.5 mM PMS (peroxymonosulfate), 94% COD and 86% NH₄⁺-N of the system were removed. The cascade net average COD removal capacity reached 16.04 kg per kg catalyst per day. The addition of PMS also enhanced the electricity generation. In continuous-mode, in totally 18 h treatment through the three-stages cascade reactors without PMS, overall, 83% COD and 78% TOC (Total Organic Carbon) were removed, reaching a net calculated system average COD removal capacity of 19.29 kg per kg catalyst per day. With Ce-g-C₃N₄ catalyst, the batch or continuous multi-stage cascade system demonstrated great technical flexibility and economic potential in treating high-strength, high-salinity amine-rich industrial wastewater.

Synergistic effect of intercalation and EDLC electrosorption of 2D/3D interconnected architectures to boost capacitive deionization for water desalination via MoSe2/mesoporous carbon hollow spheres

Transition-metal dichalcogenides can be used for capacitive deionization (CDI) via pseudocapacitive ion intercalation/de-intercalation due to their unique two-dimensional (2D) laminar structure. MoS₂ has been extensively studied in the hybrid capacitive deionization (HCDI), but the desalination performance of MoS₂-based electrodes remains only 20-35 mg g^-1 on average. Benefiting from the higher conductivity and larger layer spacing of MoSe₂ than MoS₂, it is expected that MoSe₂ would exhibit a superior HCDI desalination performance. Herein, for the first time, we explored the use of MoSe₂ in HCDI and synthesized a novel MoSe₂/MCHS composite material by utilizing mesoporous carbon hollow spheres (MCHS) as the growth substrate to inhibit the aggregation and improve the conductivity of MoSe₂. The as-obtained MoSe₂/MCHS presented unique 2D/3D interconnected architectures, allowing for synergistic effects of intercalation pseudocapacitance and electrical double layer capacitance (EDLC). An excellent salt adsorption capacity of 45.25 mg g^- 1 and a high salt removal rate of 7.75 mg g^- 1 min^-1 were achieved in 500 mg L^- 1 NaCl feed solution at an applied voltage of 1.2 V in batch-mode tests. Moreover, the MoSe₂/MCHS electrode exhibited outstanding cycling performance and low energy consumption, making it suitable for practical applications. This work demonstrates the promising application of selenides in CDI and provides new insights for ration design of high-performance composite electrode materials.

Insights into the Use of Te-O Pairs as Active Centers of Carbon Nanosheets for Efficient Electrochemical Oxygen Reduction

Previous theoretical calculations have predicted that the incorporation of tellurium (Te) into carbon materials can significantly enhance their catalytic activity. Nevertheless, the experimental realization of efficient Te-doped carbon materials remains challenging. Here, we employed theoretical calculations to deduce the possible structure of Te-doped carbon materials. Our findings unveil that the formation of Te-O pairs in carbon materials with a relatively low oxygen coordination microenvironment can impart strong electron-donating capabilities, thereby boosting the electrocatalytic activity of oxygen reduction reaction (ORR). To verify our theoretical predictions, we synthesized Te-O pair-doped carbon materials using a tandem hydrothermal dehydration-pyrolysis strategy. This approach enabled efficient infiltration of Te into carbon materials. Our unconventional Te-O pair-doped carbon materials exhibit expanded interlayer distances and graphene-like nanosheet architectures, which provide enlarged active areas. These structural features contribute to the enhanced ORR catalytic performance of the as-prepared carbon catalyst. Our findings provide molecular-level insights into the design of various carbon-based electrocatalysts with binary-heteroatom-doped active sites.

Carbon-Based Stimuli-Responsive Nanomaterials: Classification and Application

Carbon-based nanomaterials, including carbon nanotubes, carbon nanospheres, and carbon nanofibers, are becoming a research hotspot due to their unique structure and good mechanical, thermal, electrical, optical, and chemical properties. With the development of material synthesis technology, they can be functionalized and used in various fields such as energy, environment, and biomedicine. In particular, stimuli-responsive carbon-based nanomaterials have stood out in recent years because of their smart behavior. Researchers have applied carbon-based nanomaterials to different disease treatments based on their stimulus-response properties. In this paper, based on stimuli-responsive carbon-based nanomaterials' morphology, we categorize them into carbon nanotubes, carbon nanospheres, and carbon nanofibers according to their morphology. Then, their applications in probes, bioimaging, tumor therapy, and other fields are discussed. Finally, we address the advantages and disadvantages of carbon-based stimuli-responsive nanomaterials and discuss their future perspective.

Graphene Film with a Controllable Microstructure for Efficient Electrochemical Energy Storage

The agglomeration of graphene sheets and undesired pore size distribution usually lead to unsatisfactory electrochemical properties of reduced graphene oxide (RGO) film electrodes. Herein, crumpled exfoliated graphene (EG) sheets are adopted as the microstructure-regulating agent to tune the morphology and micro-/mesopore amounts with the aim of increasing active surface sites and ion transportation paths in electrodes. With the optimum ratio between EG and GO, the resulting 75%-EG/RGO shows significantly improved specific gravimetric capacitance (C_s) and rate capability when compared with pure RGO electrodes in a symmetrical supercapacitor system. Moreover, when coupling the 75%-EG/RGO cathode with a Zn anode to form a Zn ion hybrid supercapacitor (ZHS), the 75%-EG/RGO exhibits a much higher C_s of 327.39 F g^-1 at 0.1 A g^-1 and can maintain 91.7% capacitance after 8000 cycles. Systematic ex situ X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) measurements reveal that the charge storage mechanism is based on both reversible physical adsorption and dual ion uptake. Furthermore, the quasi-solid-state flexible ZHS also presents high capacitive performance and can maintain ∼100% capacitance under various bending states, demonstrating potential application in wearable electronics. This strategy opens up a new path for constructing high-performance graphene film electrodes.

Highly Efficient Electrochemical Sensing of Acetaminophen by Cobalt Oxide-Embedded Nitrogen-Doped Hollow Carbon Spheres

With respect to sensor application investigations, hollow mesoporous carbon sphere-based materials of the spinel type of cobalt oxide (Co₃O₄) and heteroatom-doped materials are gaining popularity. In this contribution, dopamine hydrochloride (DA) and cobalt phthalocyanine (CoPc) precursors were employed to construct a highly homogeneous Co₃O₄-embedded N-doped hollow carbon sphere (Co₃O₄@NHCS) by a straightforward one-step polymerization procedure. The resulting Co₃O₄@NHCS materials may effectively tune the surface area, defect sites, and doping amount of N and Co elements by altering the loading amount of CoPc. The relatively high surface area, greater spherical wall thickness, enriched defect sites, and better extent of N and Co sites are all visible in the best 200 mg loaded Co₃O₄@NHCS-2 material. This leads to significant improvement in pyridine and graphitic N site concentrations, which offers exceptional electrochemical performance. Electrochemical analysis was used to study the electrocatalytic activity of Co₃O₄@NHCSs towards the sensing of pharmacologically active significant compounds (acetaminophen). Excellent sensor properties include the linear range (0.001-0.2 and 1.0-8.0 mM), sensitivity, limit of detection (0.07 and 0.11 μM), and selectivity in the modified Co₃O₄@NHCSs/GCE. The authentic sample (acetaminophen tablet) produces a satisfactory result when used practically.

Recent Progress of Hollow Carbon Nanocages: General Design Fundamentals and Diversified Electrochemical Applications

Hollow carbon nanocages (HCNCs) consisting of sp2  carbon shells featured by a hollow interior cavity with defective microchannels (or customized mesopores) across the carbon shells, high specific surface area, and tunable electronic structure, are quilt different from the other nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make HCNCs a new platform for advanced electrochemical energy storage and conversion. This review focuses on the controllable preparation, structural regulation, and modification of HCNCs, as well as their electrochemical functions and applications as energy storage materials and electrocatalytic conversion materials. The metal single atoms-functionalized structures and electrochemical properties of HCNCs are summarized systematically and deeply. The research challenges and trends are also envisaged for deepening and extending the study and application of this hollow carbon material. The development of multifunctional carbon-based composite nanocages provides a new idea and method for improving the energy density, power density, and volume performance of electrochemical energy storage and conversion devices.

Design of Uniform Hollow Carbon Nanoarchitectures: Different Capacitive Deionization between the Hollow Shell Thickness and Cavity Size

Carbon-based materials with high capacitance ability and fast electrosorption rate are ideal electrode materials in capacitive deionization (CDI). However, traditional carbon materials have structural limitations in electrochemical and desalination performance due to the low capacitance and poor transmission channel of the prepared electrodes. Therefore, reasonable design of electrode material structure is of great importance for achieving excellent CDI properties. Here, uniform hollow carbon materials with different morphologies (hollow carbon nanospheres, hollow carbon nanorods, hollow carbon nano-pseudoboxes, hollow carbon nano-ellipsoids, hollow carbon nano-capsules, and hollow carbon nano-peanuts) are reasonably designed through multi-step template method and calcination of polymer precursors. Hollow carbon nanospheres and hollow carbon nano-pseudoboxes exhibit better capacitance and higher salt adsorption capacity (SAC) due to their stable carbonaceous structure during calcination. Moreover, the effects of the thickness of the shell and the size of the cavity on the CDI performance are also studied. HCNSs-0.8 with thicker shell (≈20 nm) and larger cavity (≈320 nm) shows the best SAC value of 23.01 mg g-1 due to its large specific surface area (1083.20 m2  g-1 ) and rich pore size distribution. These uniform hollow carbon nanoarchitectures with functional properties have potential applications in electrochemistry related fields.

Explosion Strategy Engineering Oxygen-Functionalized Groups and Enlarged Interlayer Spacing of the Carbon Anode for Enhanced Lithium Storage

Amorphous carbon monoliths with tunable microstructures are candidate anodes for future lithium-based energy storage. Enhancing lithium storage capability and solid-state diffusion kinetics are the precondition for practical applications. Transforming intrinsic oxygen-rich defects into active sites and engineering enlarged interlayer spacing are of great importance. Herein, a novel explosion strategy is designed based on oxalate pyrolysis producing CO and CO₂ to successfully prepare lignin-derived carbon monolith (LSCM) with active carbonyl (C═O) groups and enlarged interlayer spacing. Explosion promotes the demethylation of methoxyl groups and cleavage of carboxyl groups to form C═O groups. CO₂ etches carbon atoms in a short time to improve the heteroatom level, expanding the interlayer spacing. ZnC₂O₄ is decomposed at 400 °C, simultaneously producing CO and CO₂, which constructs less C═O groups and large interlayer spacing. MgC₂O₄ is decomposed at 450 and 480 °C, staged-weakly producing CO and CO₂, which constructs more C═O groups and larger interlayer spacing. CaC₂O₄ is decomposed at 480 and 700 °C, staged-uniformly producing CO and CO₂, which constructs abundant C═O groups and largest interlayer spacing. The LSCM prepared by staged-uniform explosion exhibits high lithium storage capacity, superior rate capability, and cycling performance. The assembled lithium ion capacitor device achieves excellent energy/power densities of 78 Wh kg^-1/100 W kg^-1 and superior durability (capacitance retention of 8 4.6% after 20,000 cycles). This work gives a novel insight to engineer advanced oxygen-functionalized carbons for enhanced lithium storage.

Advances in Biosensing of Chemical Food Contaminants Based on the MOFs-Graphene Nanohybrids

Food safety issue is becoming an international challenge for human health owing to the presence of contaminants. In this context, reliable, rapid, and sensitive detecting technology is extremely demanded to establish food safety assurance systems. MOFs (Metal-organic frameworks) are a new type of porous crystalline material with particular physical and chemical characteristics presented in food safety requirements. (Bio)sensors driven MOF materials have emerged as a promising alternative and complementary analytical techniques, owing to their great specific area, high porosity, and uniform and fine-tunable pore buildings. Nevertheless, the insufficient stability and electrical conductivity of classical MOFs limit their utilization. Employing graphene-derived nanomaterials with high functional elements as patterns for the MOF materials not only improves the structural instability and poor conductivity but also impedes the restacking and aggregation between graphene layers, thus significantly extending the MOFs application. A review of MOFs-graphene-based material used in food contamination detection is urgently needed for encouraging the advance of this field. Herein, this paper systematically outlines current breakthroughs in MOF-graphene-based nanoprobes, outlines their principles, and illustrates their employments in identifying mycotoxins, heavy metal ions, pathogens, antibiotics, and pesticides, referring to their multiplexing and sensitivity ability. The challenges and limitations of applying MOF-graphene composite for precise and efficient assessment of food were also debated. This paper would maybe offer some inspired concepts for an upcoming study on MOF-based composites in the food security context.

Ultrahigh Content Boron and Nitrogen Codoped Hierarchically Porous Carbon Obtained from Biomass Byproduct Okara for Capacitive Deionization

Capacitive deionization (CDI) is an environmentally friendly, energy efficient, and low cost water purification technique in comparison with other conventional techniques, and it has attracted considerable attention in recent years. Here, we use biomass byproduct okara as the starting material to fabricate a boron and nitrogen codoped hierarchically porous carbon (BNC) with ultrahigh heteroatom contents and abundant in-plane nanoholes for CDI application. With the interconnected hierarchical porous structure, the BNC not only exhibits a large surface area (647.0 m³ g^-1) for the adsorption of ions but also offers abundant ion transport channels to access the entire internal surface. Meanwhile, the ultrahigh dopants' content of B (11.9 at%) and N (14.8 at%) further gives rise to the increased surface polarity and enhanced capacitance for BNC. Owing to these favorable properties, BNC exhibits top-level salt adsorption capacity (21.5 mg g^-1) and charge efficiency (59.5%) at the initial NaCl concentration of ∼500 mg L^-1. Moreover, we performed first-principle simulations to explore the different effects between N-doping and N,B-codoping on the capacitive property, which indicate that the boron and nitrogen codoping of carbon can largely increase the quantum capacitance over the double layer capacitance. The results of this work suggest a promising prospect for the BNC material in practical CDI application.

Catalytic Oxidation of Glycerol over Pt Supported on MOF-Derived Carbon Nanosheets

A series of nitrogen-doped porous carbon nanosheets (NPCNs) doped with transition-metal-supported Pt catalysts were prepared by colloidal deposition and evaluated for the selective oxidation of glycerol to glyceric acid (GLYA) under nonalkaline conditions. The transition metal contained in the catalyst was found to affect its performance and selectivity for GLYA, with the Pt/Zr@NPCN catalyst showing the highest catalytic activity and selectivity. These materials were characterized using Brunauer-Emmett-Teller surface area analysis, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and CO₂ temperature-programmed desorption. The results showed that the small size of the Pt nanoparticles, the interaction between the Pt nanoparticles and the support, and the unique textural properties of the catalyst all promoted glycerol conversion and GLYA selectivity. A Zr concentration of 1.5 wt % and a support preparation temperature of 800 °C were found to provide a catalyst with the optimal performance that exhibited a glycerol conversion and selectivity for GLYA of 68.62 and 77.29%, respectively, at an initial O₂ pressure of 10 bar and 60 °C after 6 h. Even after being recycled five times, this material provided a GLYA selectivity of approximately 75%, although the glycerol conversion decreased from 68 to 50%. The insights may provide new suggestions on the design of efficient support for the selective oxidation of polyols.

Monomicellar assembly to synthesize structured and functional mesoporous carbonaceous nanomaterials

The large pores of functional mesoporous carbonaceous nanomaterials have broad accessibility, making them efficient substrates for the mass transport of chemicals in biomedical applications, gas separation, catalysis, sensing, and energy storage and conversion. Recently, the assembly of monomicelles has been used to control the nanostructure and mesoporosity of carbonaceous nanomaterials, where the structure-oriented unit is a single micelle made up of block copolymers/surfactants and of precursor species (via hydrogen bonds, Coulombic and/or other noncovalent interactions). Each monomicelle then represents a template for a single mesopore, and multiple monomicelles can be stacked like LEGO blocks. After polymerization of the precursor species (in this case dopamine), carbonization results in the carbonaceous nanomaterial. The micellar size, structure and shape can be easily tuned by altering the synthetic conditions, providing a high degree of control over the structure of the final product, which can therefore be shaped into original nanostructures otherwise difficult to synthesize using conventional templating methods. Here we provide a detailed procedure for the preparation of the monomicelles, the monomicellar assembly into mesostructured polymeric samples and the conversion of polymeric samples to carbonaceous frameworks. We describe the functional characterization of two mesoporous carbonaceous nanomaterials that demonstrate excellent sodium-ion storage performance and oxygen reduction reactivity, respectively. The monomicellar assembly process for the synthesis of the ordered mesoporous polymers requires ~5 h; the synthesis, including subsequent centrifugation, freeze drying and carbonization, requires 2 d, whereas the entire procedure, including the characterization of the nanomaterials, requires ~4 d.

Metal-Organic Framework-Derived N-Doped Porous Carbon for a Superprotonic Conductor at above 100 °C

The development of proton conductors capable of working at above 100 °C is of great significance for proton exchange membrane electrolysis cells (PEMECs) and proton exchange membrane fuel cells (PEMFCs) but remains to be an enormous challenge to date. In this work, we demonstrate for the first time that the N-doped porous carbon derived from metal-organic frameworks (MOFs) with great superiority can be exploited for high-performing proton conductors at above 100 °C. Through the pyrolysis of ZIF-8, the N-doped porous carbon (ZIF-8-C) featuring high chemical resistance to Fenton's reagent was readily prepared and then served as a robust host to accommodate H₃PO₄ molecules for proton transport. Upon impregnation with H₃PO₄, the resulting PA@ZIF-8-C exhibits low water swelling and high proton conduction of over 10^-2 S cm^-1 at a temperature above 100 °C, which is superior to many reported proton conductors. This work provides a new approach for the design of high-performing proton conductors at above 100 °C.

Hierarchical MXene/Polypyrrole-Decorated Carbon Nanofibers for Asymmetrical Capacitive Deionization

Membrane capacitive deionization (MCDI) has emerged as a promising electric-field-driven technology for brackish water desalination and specific salt or charged ion separation. The use of carbon-based or pseudocapacitive materials alone for MCDI usually suffers from the drawbacks of low desalination capacity and poor cycling stability due to their limited accessible adsorption sites and obstructed charge-carrier diffusion pathways. Therefore, developing a hybrid electrode material with multiple charge storage mechanisms and continuous electron/ion transport pathways that can synergistically improve its specific capacitance and cycling durability has currently become one of the most critical technical demands. Herein, we developed a novel hierarchically architectured hybrid electrode by first spinning MXene into polyacrylonitrile (PAN)-based carbon nanofibers (MCNFs) to obtain a highly conductive carbon nanocomposite framework. The excellent spatial support structure can effectively prevent the dense packing of Cl^-- and DBS^--doped polypyrrole (PPy) molecular chains during the following electrodeposition process, which not only ensures the efficient transport of electrons in the continuous hybrid carbon nanofibrous skeleton but also provides abundant accessible sites for ion adsorption and insertion. The obtained self-supporting membrane electrodes (MCNF@PPy⁺Cl^- and MCNF@PPy⁺DBS^-) have the advantages of outstanding specific capacitance (318.4 and 153.9 F/g, respectively), low charge transfer resistance (10.0 and 5.3 Ω, respectively), and excellent cycling performance (78% and 90% capacitance retention ratios, respectively, after 250 electrochemical cycles). Furthermore, the asymmetrical membrane electrodes showed a superior desalination capacity of 91.2 mg g^-1 in 500 mg/L NaCl aqueous solution and obvious divalent ion (Ca²⁺, Mg²⁺) selective adsorption properties in high-salt water from the cooling towers of thermal power plants.

Enhancing Interfacial and Electromagnetic Interference Shielding Properties of Carbon Fiber Composites via the Hierarchical Assembly of the MWNT/MOF Interphase

A metal-organic framework (MOF) based on a conjugated organic ligand and a transition-metal ion was designed and used to construct a novel multiwalled carbon nanotube (MWNT)/MOF interphase via hierarchical assembly on the carbon fiber (CF) surface and was compared to various interphases established by MWNT and MOF. An intertwined MWNT and MOF "jujube core" was randomly dispersed on MWNT@CF and MOF@CF surfaces, while interpenetrating structures with the MWNT network and MOF jujube core were simultaneously observed on MWNT/MOF@CF due to coordination bonds and π-π conjugation effects, which were derived from the MWNT template with carboxyl groups and sp²-hybridized domains as well as the secondary growth of MOF to promote self-assembly and the connection of MOF. The transverse fiber bundle test (TFBT) strength and interfacial shear strength (IFSS) of the MWNT/MOF@CF composite were 36.9, 6.1, and 20.8%, 16.3% higher than those of MWNT@CF and MOF@CF composites, which were attributed to the smoothed modulus transition of the stiffening interphase formed by the MWNT/MOF hybrid structure as "armor" to effectively buffer the stress transfer between a carbon fiber and the resin matrix. Compared to MWNT@CF and MOF@CF composites, MWNT/MOF@CF composites had the highest EMI shielding effectiveness, which was attributed to the combined effects of multiple reflections, conductive loss, and interface polarization from the interpenetrating MWNT/MOF hybrid structures, which realized the integration of the structure and function of the carbon fiber composites.

Metal-Organic Framework-Derived Carbon as a Photoacoustic Modulator of Alzheimer's β-Amyloid Aggregate Structure

Photoacoustic materials emit acoustic waves into the surrounding by absorbing photon energy. In an aqueous environment, light-induced acoustic waves form cavitation bubbles by altering the localized pressure to trigger the phase transition of liquid water into vapor. In this study, we report photoacoustic dissociation of beta-amyloid (Aβ) aggregates, a hallmark of Alzheimer's disease, by metal-organic framework-derived carbon (MOFC). MOFC exhibits a near-infrared (NIR) light-responsive photoacoustic characteristic that possesses defect-rich and entangled graphitic layers that generate intense cavitation bubbles by absorbing tissue-penetrable NIR light. According to our video analysis, the photoacoustic cavitation by MOFC occurs within milliseconds in the water, which was controllable by NIR light dose. The photoacoustic cavitation successfully transforms robust, β-sheet-dominant neurotoxic Aβ aggregates into nontoxic debris by changing the asymmetric distribution of water molecules around the Aβ's amino acid residues. This work unveils the therapeutic potential of NIR-triggered photoacoustic cavitation as a modulator of the Aβ aggregate structure.

Nitrogen and Sulfur Co-Doped Hierarchically Porous Carbon Nanotubes for Fast Potassium Ion Storage

Exploration of advanced carbon anode material is the key to circumventing the sluggish kinetics and poor rate capability for potassium ion storage. Herein, a synergistic synthetic strategy of engineering both surface and structure is adopted to design N, S co-doped carbon nanotubes (NS-CNTs). The as-designed NS-CNTs exhibit unique features of defective carbon surface, hollow tubular channel, and enlarged interlayer space. These features significantly contribute to a large potassium storage capacity of 307 mA h g^-1 at 1 A g^-1 and a remarkable rate performance with a capacity of 151 mA h g^-1 even at 5 A g^-1 . Furthermore, an excellent cyclability with 98% capacity retention after 500 cycles at 2 A g^-1 is also achieved. Systematic analysis by in situ Raman spectroscopy and ex situ TEM demonstrates the structural stability and reversibility in the charge-discharge process. Although the kinetics studies reveal the capacitive-dominated process for potassium storage, density functional theory calculations provide evidence that N, S co-doping contributes to expanding the interlayer space to promote the K-ion insertion, improving the electronic conductivity, and providing ample defective sites to favor the K-ion adsorption.

MOF-derived nanoporous carbons with diverse tunable nanoarchitectures

Metal-organic frameworks (MOFs), or porous coordination polymers, are crystalline porous materials formed by coordination bonding between inorganic and organic species on the basis of the self-assembly of the reacting units. The typical characteristics of MOFs, including their large specific surface areas, ultrahigh porosities and excellent thermal and chemical stabilities, as well as their great potential for chemical and structural modifications, make them excellent candidates for versatile applications. Their poor electrical conductivity, however, has meant that they have not been useful for electrochemical applications. Fortuitously, the direct carbonization of MOFs results in a rearrangement of the carbon atoms of the organic units into a network of carbon atoms, which means that the products have useful levels of conductivity. The direct carbonization of zeolitic imidazolate framework (ZIF)-type MOFs, particularly ZIF-8, has successfully widened the scope of possible applications of MOFs to include electrochemical reactions that could be used in, for example, energy storage, energy conversion, electrochemical biosensors and capacitive deionization of saline water. Here, we present the first detailed protocols for synthesizing high-quality ZIF-8 and its modified forms of hollow ZIF-8, core-shell ZIF-8@ZIF-67 and ZIF-8@mesostuctured polydopamine. Typically, ZIF-8 synthesis takes 27 h to complete, and subsequent nanoarchitecturing procedures leading to hollow ZIF-8, ZIF-8@ZIF-67 and ZIF-8@mPDA take 6, 14 and 30 h, respectively. The direct-carbonization procedure takes 12 h. The resulting nanoporous carbons are suitable for electrochemical applications, in particular as materials for supercapacitors.