Incorporating Fullerenes in Nanoscale Metal-Organic Matrixes: An Ultrasensitive Platform for Impedimetric Aptasensing of Tobramycin

Magnetic metal-organic frameworks as sensitive aptasensors for coronavirus spike protein

Electrochemical biosensors, known for their low cost, sensitivity, selectivity, and miniaturization capabilities, are ideal for point-of-care devices. The magnetic metal-organic framework (MMOF), synthesized using the in-situ growth method, consists of ferric salt, magnetic nanoparticles, histidine, and benzene tetracarboxylic acid. MMOF was sequentially modified with aptamer-biotin and streptavidin-horseradish peroxidase, serving as a detector for spike protein and a transducer converting electrochemical signals using H2O2-hydroquinone on a screen-printed electrode. MMOF facilitates easy washing and homogeneous deposition on the working electrode with a magnet, enhancing sensitivity and reducing noise. The physical and electrochemical properties of the modified MMOFs were thoroughly characterized using various analytical techniques. The aptasensors' performance achieved a detection limit of 6 pM for voltammetry and 5.12 pM for impedance spectroscopy in human serum samples. This cost-effective, portable MMOF platform is suitable for rapid point-of-care testing for SARS-CoV-2 spike proteins.

State-of-the-art electrochemical biosensors based on covalent organic frameworks and their hybrid materials

As the development of global population and industry civilization, the accurate and sensitive detection of intended analytes is becoming an important and great challenge in the field of environmental, medical, and public safety. Recently, electrochemical biosensors have been constructed and used in sensing fields, such as antibiotics, pesticides, specific markers of cancer, and so on. Functional materials have been designed and prepared to enhance detection performance. Among all reported materials, covalent organic frameworks (COFs) are emerging as porous crystalline materials to construct electrochemical biosensors, because COFs have many unique advantages, including large surface area, high stability, atom-level designability, and diversity, to achieve a far better sensing performance. In this comprehensive review, we not only summarize state-of-the-art electrochemical biosensors based on COFs and their hybrid materials but also highlight and discuss some typical examples in detail. We finally provide the challenge and future perspective of COFs-based electrochemical biosensors.

Integrating porphyrin-based nanoporous organic polymers with electrochemical aptasensors for ultratrace detection of kanamycin

The synthesis and characterization of two new porphyrin-based porous organic polymers (POPs) via Sonogashira cross-coupling reaction and leverage the two obtained POPs is reported for the fabrication of electrochemical aptasensors to detect kanamycin at an ultratrace level. The resultant electrochemical aptasensor demonstrates a high linear relationship with the logarithmic value of kanamycin concentration in the range 5 × 10-5-5 μg/L with the limit of detection of 17.6 pg/L or 36.3 fM. During the analysis of real samples from milk and river, a relative standard deviation of less than 4.39%, and good recovery values in the range 97.0-105% were obtained.

An electrochemical impedimetric platform formed by a CNT@UiO-66 nanocomposite for quantitative analysis of oxytetracycline

Functional materials are considered one of the most critical factors in constructing high-performance electrochemical aptasensors in the sensing field. In this work, the microporous Zr-MOF UiO-66 (UiO = Universitetet i Oslo) is selected for assembly with carbon nanotubes (CNTs) to prepare a CNT@UiO-66 composite. The as-synthesized CNT@UiO-66 composite has a high surface area, excellent stability, good electrical conductivity, and abundant Zr(IV) sites, conferring it great potential for application in fabricating high-performance electrochemical aptasensors. It is gratifying that this electrochemical impedimetric aptasensor can detect trace oxytetracycline (OTC) from 0.01 to 0.7 pg mL-1 with a low limit of detection (LOD) of 1.48 fg mL-1. Meanwhile, this fabricated sensor based on CNT@UiO-66 has fine stability, excellent selectivity, and available reproducibility. In particular, the CNT@UiO-66-based aptasensor can quantitatively detect the OTC concentration in real samples.

A UiO-66-NH2 MOF/PAMAM Dendrimer Nanocomposite for Electrochemical Detection of Tramadol in the Presence of Acetaminophen in Pharmaceutical Formulations

In this work, we prepared a novel electrochemical sensor for the detection of tramadol based on a UiO-66-NH₂ metal-organic framework (UiO-66-NH₂ MOF)/third-generation poly(amidoamine) dendrimer (G3-PAMAM dendrimer) nanocomposite drop-cast onto a glassy carbon electrode (GCE) surface. After the synthesis of the nanocomposite, the functionalization of the UiO-66-NH₂ MOF by G3-PAMAM was confirmed by various techniques including X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), field emission-scanning electron microscopy (FE-SEM), and Fourier transform infrared (FT-IR) spectroscopy. The UiO-66-NH₂ MOF/PAMAM-modified GCE exhibited commendable electrocatalytic performance toward the tramadol oxidation owing to the integration of the UiO-66-NH₂ MOF with the PAMAM dendrimer. According to differential pulse voltammetry (DPV), it was possible to detect tramadol under optimized circumstances in a broad concentration range (0.5 μM-500.0 μM) and a narrow limit of detection (0.2 μM). In addition, the stability, repeatability, and reproducibility of the presented UiO-66-NH₂ MOF/PAMAM/GCE sensor were also studied. The sensor also possessed an acceptable catalytic behavior for the tramadol determination in the co-existence of acetaminophen, with the separated oxidation potential of ΔE = 410 mV. Finally, the UiO-66-NH₂ MOF/PAMAM-modified GCE exhibited satisfactory practical ability in pharmaceutical formulations (tramadol tablets and acetaminophen tablets).

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Tailoring enzymatic loading capacity on CdS nanorods@ZnIn2S4 nanosheets 1D/2D heterojunctions: Toward ultrasensitive photoelectrochemical bioassay of tobramycin

Despite advances in the development of photoelectrochemical (PEC) sensor, modulating the PEC response of assembled heterostructure interface is still a great challenge. Here, an ultrasensitive PEC aptasensor for tobramycin (TOB) assay was conducted based on one-dimensional/two-dimensional CdS nanorods@ZnIn₂S₄ nanosheets (1D/2D CdS NRs@ZnIn₂S₄ NSs) heterojunctions by tailoring enzymatic loading capacity. Firstly, alkaline phosphatase modified TOB aptamer (ALP-Apt) was linked via specific base complementary pairing, and insoluble precipitations were then produced through the ALP-triggered catalytic reaction with the aid of Ag⁺, which prevented the charge transfer and resulted in the decrement of photocurrent. In the presence of TOB, partial ALP-Apt detached from the electrode surface due to the strong affinity between TOB and its aptamer, leading to a reduction in the amount of ALP and insoluble precipitate, in turn the PEC response partially recovered. The photocurrents exhibited a wider linear range towards the TOB concentration of 1.0-5.0 × 10⁴ pg mL^-1, with a low detection limit of 0.96 pg mL^-1. The constructed PEC aptasensor gained satisfactory results for TOB assay in milk samples as well, which also offered significant promise for other pollutants in environmental analysis.

Recent Advances in Metal-Organic-Framework-Based Nanocarriers for Controllable Drug Delivery and Release

Metal-organic frameworks (MOFs) have a good designability, a well-defined pore, stimulus responsiveness, a high surface area, and a controllable morphology. Up to now, various MOFs have been widely used as nanocarriers and have attracted lots of attention in the field of drug delivery and release because of their good biocompatibility and high-drug-loading capacity. Herein, we provide a comprehensive summary of MOF-based nanocarriers for drug delivery and release over the last five years. Meanwhile, some representative examples are highlighted in detail according to four categories, including the University of Oslo MOFs, Fe-MOFs, cyclodextrin MOFs, and other MOFs. Moreover, the opportunities and challenges of MOF-based smart delivery vehicles are discussed. We hope that this review will be helpful for researchers to understand the recent developments and challenges of MOF-based drug-delivery systems.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Prism-like bimetallic (Ni-Co) alkaline carboxylate-based non-enzymatic sensor capable of exceptionally high catalytic activity towards glucose

In this study, we fabricated a novel non-enzymatic glucose sensor based on prism-like bimetallic alkaline carboxylate (CoNi-MIM). The morphology and structure of CoNi-MIM were carefully investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The electrochemical glucose oxidation of the synthesized sensor was then explored by cyclic voltammetry (CV) and chronoamperometry in alkaline medium. It was found that CoNi-MIM is the optimal choice with a remarkably high sensitivity of 5024.4 μA mM^-1 cm^-2, low detection limit of 56.1 nM (S/N = 3), linear response of up to 14.3 mM and excellent selectivity compared to Co-MIM, CoFe-MIM and CoMn-MIM. Furthermore, the as-fabricated sensor demonstrated appreciable practicality for the determination of glucose in real samples. These results indicate that CoNi-MIM holds a good application prospect in non-enzymatic glucose sensing.

An Aptasensor Based on a Flexible Screen-Printed Silver Electrode for the Rapid Detection of Chlorpyrifos

In this work, we propose a novel disposable flexible and screen-printed electrochemical aptamer-based sensor (aptasensor) for the rapid detection of chlorpyrifos (CPF). To optimize the process, various characterization procedures were employed, including Fourier transform infrared spectroscopy (FT-IR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Initially, the aptasensor was optimized in terms of electrolyte pH, aptamer concentration, and incubation time for chlorpyrifos. Under optimal conditions, the aptasensor showed a wide linear range from 1 to 105 ng/mL with a calculated limit of detection as low as 0.097 ng/mL and sensitivity of 600.9 µA/ng. Additionally, the selectivity of the aptasensor was assessed by identifying any interference from other pesticides, which were found to be negligible (with a maximum standard deviation of 0.31 mA). Further, the stability of the sample was assessed over time, where the reported device showed high stability over a period of two weeks at 4 °C. As the last step, the ability of the aptasensor to detect chlorpyrifos in actual samples was evaluated by testing it on banana and grape extracts. As a result, the device demonstrated sufficient recovery rates, which indicate that it can find application in the food industry.

Identifying the Gate-Opening Mechanism in the Flexible Metal-Organic Framework UTSA-300

Atomic-level understanding of the gate-opening phenomenon in flexible porous materials is an important step toward learning how to control, design, and engineer them for applications such as the separation of gases from complex mixtures. Here, we report such mechanistic insight through an in-depth study of the pressure-induced gate-opening phenomenon in our earlier reported metal-organic framework (MOF) Zn(dps)₂(SiF₆) (dps = 4,4'-dipyridylsulfide), also called UTSA-300, using isotherm and calorimetry measurements, in situ infrared spectroscopy, and ab initio simulations. UTSA-300 is shown to selectively adsorb acetylene (C₂H₂) over ethylene (C₂H₄) and ethane (C₂H₆) and undergoes an abrupt gate-opening phenomenon, making this framework a highly selective gas separator of this complex mixture. The selective adsorption is confirmed by pressure-dependent in situ infrared spectroscopy, which, for the first time, shows the presence of multiple C₂H₂ species with varying strengths of bonding. A rare energetic feature at the gate-opening condition of the flexible MOF is observed in our differential heat energies, directly measured by calorimetry, showcasing the importance of this tool in adsorption property exploration of flexible frameworks and offering an energetic benchmark for further energy-based fundamental studies. Based on the agreement of this feature with ab initio-based adsorption energies of C₂H₂ in the closed-pore structure UTSA-300a ("a" refers to the activated form), this feature is assigned to the weakening of the H-bond C-H···F formed between C₂H₂ and fluorine of the MOF. Our analysis identifies the weakening of this H-bond, the expansion of the closed-pore MOF upon successive C₂H₂ coadsorption until its volume is close to that of the open-pore MOF, and the spontaneous gate opening to energetically favor C₂H₂ adsorption in the open-pore structure as crucial steps in the gate-opening mechanism in this system.

A Comprehensive Review of Metal-Organic Framework: Synthesis, Characterization, and Investigation of Their Application in Electrochemical Biosensors for Biomedical Analysis

Many studies have addressed electrochemical biosensors because of their simple synthesis process, adjustability, simplification, manipulation of materials' compositions and features, and wide ranges of detection of different kinds of biomedical analytes. Performant electrochemical biosensors can be achieved by selecting materials that enable faster electron transfer, larger surface areas, very good electrocatalytic activities, and numerous sites for bioconjugation. Several studies have been conducted on the metal-organic frameworks (MOFs) as electrode modifiers for electrochemical biosensing applications because of their respective acceptable properties and effectiveness. Nonetheless, researchers face challenges in designing and preparing MOFs that exhibit higher stability, sensitivity, and selectivity to detect biomedical analytes. The present review explains the synthesis and description of MOFs, and their relative uses as biosensors in the healthcare sector by dealing with the biosensors for drugs, biomolecules, as well as biomarkers with smaller molecular weight, proteins, and infectious disease.

Preparation of Bi/BiOBr sensitized titania nanorod array via one-pot solvothermal method and construction of kanamycin photoelectrochemical aptasensor

In this work, a photoelectrochemical (PEC) aptasensor for detecting kanamycin (KAN) was designed based on aptamer modified Bi/BiOBr/ titania nanorod array (TiO2 NRA). Bi/BiOBr was loaded onto TiO2 NRA via...