Lithium Nafion-Modified Li6.05Ga0.25La3Zr2O11.8F0.2 Trilayer Hybrid Solid Electrolyte for High-Voltage Cathodes in All-Solid-State Lithium-Metal Batteries

High-Performance Pure Polymer Electrolytes with Enhanced Ionic Conductivity for Room-Temperature Applications

All-solid-state lithium metal batteries (ASSLMBs) are renowned for their high energy density and safety, positioning them as leading candidates for next-generation energy storage solutions. In this study, pure polymer solid-state electrolytes are developed using the solution casting method, optimized for room temperature operation. The base material, poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), is enhanced with succinonitrile (SN) and polyacrylonitrile (PAN) to improve its electrochemical performance at room temperature. The optimized electrolyte, PSP-0.05, demonstrated superior characteristics, including an ionic conductivity (σ) of 3.2 × 10-4 S cm-1 and a wide voltage window of up to 5 V. When integrated into full batteries, PSP-0.05 exhibited exceptional performance in multiplicative cycling tests at room temperature, achieving discharge specific capacities of 132 and 113 mAh g-1 at 3 and 5 C rates, respectively. Additionally, long-term cycling at 1 C rate resulted in an initial discharge-specific capacity of 145.2 mAh g-1 with over 94.9% capacity retention after 1000 cycles. Given the simplicity of the preparation process and its impressive electrochemical properties, the PSP-0.05 electrolyte holds significant potential for practical applications in safer ASSLMBs.

Research Progress on the Composite Methods of Composite Electrolytes for Solid-State Lithium Batteries

In the current challenging energy storage and conversion landscape, solid-state lithium metal batteries with high energy conversion efficiency, high energy density, and high safety stand out. Due to the limitations of material properties, it is difficult to achieve the ideal requirements of solid electrolytes with a single-phase electrolyte. A composite solid electrolyte is composed of two or more different materials. Composite electrolytes can simultaneously offer the advantages of multiple materials. Through different composite methods, the merits of various materials can be incorporated into the most essential part of the battery in a specific form. Currently, more and more researchers are focusing on composite methods for combining components in composite electrolytes. The ion transport capacity, interface stability, machinability, and safety of electrolytes can be significantly improved by selecting appropriate composite methods. This review summarizes the composite methods used for the components of composite electrolytes, such as filler blending, embedded framework, and multilayer bonding. It also discusses the future development trends of all-solid-state lithium batteries (ASSLBs).

A Large-Scale Fabrication of Flexible, Ultrathin, and Robust Solid Electrolyte for Solid-State Lithium-Sulfur Batteries

All-solid-state lithium metal batteries (ASSLMBs) are considered as the most promising candidates for the next-generation high-safety batteries. To achieve high energy density in ASSLMBs, it is essential that the solid-state electrolytes (SSEs) are lightweight, thin, and possess superior electrochemical stability. In this study, a feasible and scalable fabrication approach to construct 3D supporting skeleton using an electro-blown spinning technique is proposed. This skeleton not only enhances the mechanical strength but also hinders the migration of Li-salt anions, improving the lithium-ion transference number of the SSE. This provides a homogeneous distribution of Li-ion flux and local current density, promoting uniform Li deposition. As a result, based on the mechanically robust and thin SSEs, the Li symmetric cells show outstanding Li plating/stripping reversibility. Besides, a stable interface contact between SSE and Li anode has been established with the formation of an F-enriched solid electrolyte interface layer. The solid-state Li|sulfurized polyacrylonitrile (Li|SPAN) cell achieves a capacity retention ratio of 94.0% after 350 cycles at 0.5 C. Also, the high-voltage Li|LCO cell shows a capacity retention of 92.4% at 0.5 C after 500 cycles. This fabrication approach for SSEs is applicable for commercially large-scale production and application in high-energy-density and high-safety ASSLMBs.

Piezoelectrically-activated antibacterial catheter for prevention of urinary tract infections in an on-demand manner

Catheter-associated urinary tract infection (CAUTI) is a common clinical problem, especially during long-term catheterization, causing additional pain to patients. The development of novel antimicrobial coatings is needed to prolong the service life of catheters and reduce the incidence of CAUTIs. Herein, we designed an antimicrobial catheter coated with a piezoelectric zinc oxide nanoparticles (ZnO NPs)-incorporated polyvinylidene difluoride-hexafluoropropylene (ZnO-PVDF-HFP) membrane. ZnO-PVDF-HFP could be stably coated onto silicone catheters simply by a one-step solution film-forming method, very convenient for industrial production. In vitro, it was demonstrated that ZnO-PVDF-HFP coating could significantly inhibit bacterial growth and the formation of bacterial biofilm under ultrasound-mediated mechanical stimulation even after 4 weeks. Importantly, the on and off of antimicrobial activity as well as the strenth of antibacterial property could be controlled in an adaptive manner via ultrasound. In a rabbit model, the ZnO-PVDF-HFP-coated catheter significantly reduced the incidence CAUTIs compared with clinically-commonly used catheters under assistance of ultrasonication, and no side effect was detected. Collectively, the study provided a novel antibacterial catheter to prevent the occurrence of CAUTIs, whose antibacterial activity could be controlled in on-demand manner, adaptive to infection situation and promising in clinical application.

Uniform Lithium Plating for Dendrite-Free Lithium Metal Batteries: Role of Dipolar Channels in Poly(vinylidene fluoride) and PbZrxTi1-xO3 Interface

Conventional polymer/ceramic composite solid-state electrolytes (CPEs) have limitations in inhibiting lithium dendrite growth and fail to meet the contradictory requirements of anodes and cathodes. Herein, an asymmetrical poly(vinylidene fluoride) (PVDF)-PbZrxTi1-xO3 (PZT) CPE was prepared. The CPE incorporates high dielectric PZT nanoparticles, which enrich a dense thin layer on the anode side, making their dipole ends strongly electronegative. This attracts lithium ions (Li+) at the PVDF-PZT interface to transport through dipolar channels and promotes the dissociation of lithium salts into free Li+. Consequently, the CPE enables homogeneous lithium plating and suppresses dendrite growth. Meanwhile, the PVDF-enriched region at the cathode side ensures intermediate contact with positive active materials. Therefore, Li/PVDF-PZT CPE/Li symmetrical cells exhibit a stable cycling performance exceeding 1900 h at 0.1 mA cm-2 at 25 °C, outperforming Li/PVDF solid-state electrolyte/Li cells that fail after 120 h. The LiNi0.8Co0.1Mo0.1O2/PVDF-PZT CPE/Li cells show low interfacial impedances and maintain stable cycling performance for 500 cycles with a capacity retention of 86.2% at 0.5 C and 25 °C. This study introduces a strategy utilizing dielectric ceramics to construct dipolar channels, providing a uniform Li+ transport mechanism and inhibiting dendrite growth.

Ceramic-in-Polymer Hybrid Electrolytes with Enhanced Electrochemical Performance

Polymer electrolytes are attractive candidates to boost the application of rechargeable lithium metal batteries. Single-ion conducting polymers may reduce polarization and lithium dendrite growth, though these materials could be mechanically overly rigid, thus requiring ion mobilizers such as organic solvents to foster transport of Li ions. An inhomogeneous mobilizer distribution and occurrence of preferential Li transport pathways eventually yield favored spots for Li plating, thereby imposing additional mechanical stress and even premature cell short circuits. In this work, we explored ceramic-in-polymer hybrid electrolytes consisting of polymer blends of single-ion conducting polymer and PVdF-HFP, including EC/PC as swelling agents and silane-functionalized LATP particles. The hybrid electrolyte features an oxide-rich layer that notably stabilizes the interphase toward Li metal, enabling single-side lithium deposition for over 700 h at a current density of 0.1 mA cm^-2. The incorporated oxide particles significantly reduce the natural solvent uptake from 140 to 38 wt % despite maintaining reasonably high ionic conductivities. Its electrochemical performance was evaluated in LiNi_0.6Co_0.2Mn_0.2O₂ (NMC622)||Li metal cells, exhibiting impressive capacity retention over 300 cycles. Notably, very thin LiNbO₃ coating of the cathode material further boosts the cycling stability, resulting in an overall capacity retention of 78% over more than 600 cycles, clearly highlighting the potential of hybrid electrolyte concepts.