Single-Particle Electrochemical Imaging Provides Insights into Silver Nanoparticle Dissolution at the Solution-Solid Interface

Cyclic Voltarefractometry of Single TiO2 Nanoparticles in Large Ensembles in Nonaqueous Electrolyte

Single nanoparticle (NP) cyclic voltarefractometry (CVR), realized as wide-field surface plasmon resonance microscopy (SPRM) in combination with potential cycling, has been proposed and applied to the in situ study of TiO2 NPs. Electrochemical activity of TiO2 is mainly observed outside the electrochemical stability window of water. Therefore, the response of individual anatase (a-TiO2) and rutile (r-TiO2) NPs adsorbed on a gold layer was studied in 0.25 M LiClO4 acetonitrile solutions. The use of acetonitrile allows us to exploit a much wider potential window compared to water, while due to the almost identical refractive index (nD = 1.344 and 1.333 for acetonitrile and water, respectively), the conditions of the SPR are not changed. This greatly expands the variety of electrochemical reactions that can be studied by SPR techniques. Cyclic polarization of a-TiO2 and r-TiO2 NPs results in pronounced electrochemical and optical responses around -1.55 V and around -1.8 V vs Fc+/Fc, respectively. This specific optoelectrochemical response allows them to be distinguished from other NPs. Based on this difference in characteristic potentials, a mixture of a-TiO2 and r-TiO2 NPs can be analyzed by CVR as well. The proposed correction algorithm compensates for the drift in the SPRM background caused by the accompanying formation of insoluble compounds and separates the optical response of the NPs out of the background. The results obtained in the study of this complex system demonstrate the capabilities of the developed analytical method. The CVR can be applied to the quantitative analysis of many other types of NPs in nonaqueous solutions, providing information on the electrochemical properties of each individual particle on the electrode surface.

Label-Free Optical Imaging of Nanoscale Single Entities

The advancement of optical microscopy technologies has achieved imaging of nanoscale objects, including nanomaterials, virions, organelles, and biological molecules, at the single entity level. Recently developed plasmonic and scattering based optical microscopy technologies have enabled label-free imaging of single entities with high spatial and temporal resolutions. These label-free methods eliminate the complexity of sample labeling and minimize the perturbation of the analyte native state. Additionally, these imaging-based methods can noninvasively probe the dynamics and functions of single entities with sufficient throughput for heterogeneity analysis. This perspective will review label-free single entity imaging technologies and discuss their principles, applications, and key challenges.

Surface Plasmon Resonance Biosensors: A Review of Molecular Imaging with High Spatial Resolution

Surface plasmon resonance (SPR) is a powerful tool for determining molecular interactions quantitatively. SPR imaging (SPRi) further improves the throughput of SPR technology and provides the spatially resolved capability for observing the molecular interaction dynamics in detail. SPRi is becoming more and more popular in biological and chemical sensing and imaging. However, SPRi suffers from low spatial resolution due to the imperfect optical components and delocalized features of propagating surface plasmonic waves along the surface. Diverse kinds of approaches have been developed to improve the spatial resolution of SPRi, which have enormously impelled the development of the methodology and further extended its possible applications. In this minireview, we introduce the mechanisms for building a high-spatial-resolution SPRi system and present its experimental schemes from prism-coupled SPRi and SPR microscopy (SPRM) to surface plasmonic scattering microscopy (SPSM); summarize its exciting applications, including molecular interaction analysis, molecular imaging and profiling, tracking of single entities, and analysis of single cells; and discuss its challenges in recent decade as well as the promising future.

Environmental behavior of silver nanomaterials in aquatic environments: An updated review

The increasing applications of silver nanomaterials (nano-Ag) and their inevitable release posed great potential risks to aquatic organisms and ecosystems. Considerable attention has been attracted on their behaviors and transformations, which were critically important for their subsequent biological toxicities and ecological effects. Therefore, the summary of the recent efforts on the environmental behavior of nano-Ag would be beneficial for understanding the environmental fate and accurate risk assessment. This review summarized the studies on various physical, chemical and biological transformations of nano-Ag, meanwhile, the influencing factors (including the intrinsic properties and environmental conditions) and related mechanisms were highlighted. Surface structure and facets of nano-Ag, abiotic conditions and natural freeze-thaw cycle processes could affect the transformations of nano-Ag under different environmental scenarios (including freshwater, seawater and wastewater). The interactions with co-present components, such as chemicals and other particles, impacted the multiple processes of nano-Ag. Besides, the contradictory effects and mechanisms by several environmental factors were summarized. Lastly, the key knowledge gaps and some aspects that deserve further investigation were also addressed. Therefore, the current review aimed to provide an overall analysis of transformation processes of nano-Ag, which will provide more available information and pave the way for the future research areas.

Bioavailability and translocation of platinum nanoparticles and platinum ions in rice (Oryza sativa L.): Nanoparticles biosynthesis and size-dependent transformation

Metal nanoparticles accumulation and bioavailability in plants raised much attention, specifically transformation and transportation of nanoparticles and their corresponding ions in plants are still unknown. In this work, rice seedlings were exposed to platinum nanoparticles (PtNPs) (with three sizes of 25, 50, and 70 nm) and Pt ions (with doses of 1, 2, and 5 mg/L) to investigate the influences of particle size and Pt form on bioavailability and translocation mechanism of metal nanoparticles. Results based on single particle ICP-MS (SP-ICP-MS) demonstrated the biosynthesis of PtNPs in Pt ions treated rice seedlings. The particle size ranges at 75-79.3 nm were detected in Pt ions exposed rice roots, and further migrated up to rice shoots at 21.7-44.3 nm. After exposed to PtNP-25, the particles could transfer to shoots with the original size distribution detected in roots, even with the PtNPs dose change. PtNP-50 and PtNP-70 translocated to shoots with the particle size increase. For the rice exposure with three dose levels, PtNP-70 had the highest number-based bioconcentration factors (NBCFs) in all Pt species, while Pt ions had the highest bioconcentration factors (BCFs), a range of 1.43-2.04. All PtNPs and Pt ions could be accumulated in rice plants and further transferred to shoots, and particle biosynthesis was proved through SP-ICP-MS. The finding could help us better understand the influence of particle size and form on the transformations of PtNPs in environment.

Active Control of Energy Transfer in Plasmonic Nanorod-Polyaniline Hybrids

The hybridization of plasmonic energy and charge donors with polymeric acceptors is a possible means to overcome fast internal relaxation that limits potential photocatalytic applications for plasmonic nanomaterials. Polyaniline (PANI) readily hybridizes onto gold nanorods (AuNRs) and has been used for the sensitive monitoring of local refractive index changes. Here, we use single-particle spectroscopy to quantify a previously unreported plasmon damping mechanism in AuNR-PANI hybrids while actively tuning the PANI chemical structure. By eliminating contributions from heterogeneous line width broadening and refractive index changes, we identify efficient resonance energy transfer (RET) between AuNRs and PANI. We find that RET dominates the optical response in our AuNR-PANI hybrids during the dynamic tuning of the spectral overlap of the AuNR donor and PANI acceptor. Harnessing RET between plasmonic nanomaterials and an affordable and processable polymer such as PANI offers an alternate mechanism toward efficient photocatalysis with plasmonic nanoparticle antennas.

Plasmonic Scattering Imaging of Surface-Bonded Nanoparticles at the Solution-Solid Interface

Imaging nanoscale objects at interfaces is essential for revealing surface-tuned mechanisms in chemistry, physics, and life science. Plasmonic-based imaging, a label-free and surface-sensitive technique, has been widely used for studying the chemical and biological behavior of nanoscale objects at interfaces. However, direct imaging of surface-bonded nanoscale objects remains challenging due to uneven image backgrounds. Here, we present a new surface-bonded nanoscale object detection microscopy that eliminates strong background interference by reconstructing accurate scattering patterns at different positions. Our method effectively functions at low signal-to-background ratios, allowing for optical scattering detection of surface-bonded polystyrene nanoparticles and severe acute respiratory syndrome coronavirus 2 pseudovirus. It is also compatible with other imaging configurations, such as bright-field imaging. This technique complements existing methods for dynamic scattering imaging and broadens the applications of plasmonic imaging techniques for high-throughput sensing of surface-bonded nanoscale objects, enhancing our understanding of the properties, composition, and morphology of nanoparticles and surfaces at the nanoscale.

Tracking the Dissolution Surface Kinetics of a Single Fluorescent Cyclodextrin Metal-Organic Framework by Confocal Laser Scanning Microscopy

The understanding of the dissolution processes of solids is important for the design and synthesis of solids in a controlled and precise manner and for predicting their fate in the aquatic environment. We report herein single-particle-based confocal laser scanning microscopy (CLSM) for tracking the dissolution surface kinetics of a single fluorescent cyclodextrin metal-organic framework (CD-MOF). As a proof of concept, CD-MOF containing fluorescein, named as CD-MOF⊃FL, was synthesized by encapsulating fluorescein into the interior of CD-MOF via a vapor diffusion method and used as a single-particle dissolution model because of its high FL efficiency and unique structure. The morphology of CD-MOF⊃FL and the distribution of fluorescein within CD-MOF⊃FL were characterized. The growth and dissolution processes of CD-MOF⊃FL at the single-particle level were visualized and quantified for the first time by recording the change of the fluorescence emission. Three processes, including nucleation, germination growth, and saturation stage, were found in the growth of CD-MOF⊃FL, and the growth kinetics followed Avrami's model. The dissolution rate at the face of a single CD-MOF⊃FL crystal was slower than that of its arris, and the dissolution rate of the CD-MOF⊃FL crystal was increased with the increase of the water amount in methanol solution. The dissolution process of the CD-MOF⊃FL crystal was a competitive process of erosion and diffusion in different methanol aqueous solutions, and the dissolution kinetics followed the Korsmeyer-Peppas model. These results offer new insights into the nature of dissolution kinetics of CD-MOF⊃FL and provide new venues for the quantitative analysis of solid dissolution and growth at the single-particle level.