Humidity-Tolerant Room-Temperature Selective Dual Sensing and Discrimination of NH3 and NO Using a WS2/MWCNT Composite

High-Aspect-Ratio In2-xGaxO3 Integrated with Amorphous Al2O3 Nanofibers: All-Inorganic Self-Supporting Wearable Membranes for Ultralow-Concentration NO Sensing in Simulated Exhalation

Achieving high flexibility, breathability, and sensitivity in inorganic semiconductor gas sensors remains a substantial challenge, especially for wearable applications in high-humidity environments. This study develops a hyper-flexible, thermally stable, and highly breathable full-inorganic, self-supporting In2-xGaxO3-Al2O3/Al2O3 nanofiber membrane sensor, fabricated using a dual-spinneret electrospinning method with an interlocking design. This innovative sensor has a bilayer structure with an amorphous Al2O3 nanofiber substrate layer supporting an active layer of high-aspect-ratio interwoven In2-xGaxO3 and Al2O3 nanofibers, providing outstanding flexibility, elevated breathability, and strong thermal stability. Owing to low-concentration Ga3+ doping and its nanofiber-built self-supporting porous design, the In1.98Ga0.02O3-Al2O3/Al2O3 sensor demonstrates excellent sensitivity, selectivity, and cycling stability for detecting ultralow-concentration NO biomarker (≈15 ppb) under simulated breath conditions, without performance deterioration, even after 10000 large-angle bending cycles. This work advances the universal fabrication of high-performance, full-inorganic wearable gas sensors for breath-based diagnostic applications.

Ammonia-sensitive halide CsCu2I3 film for gas sensor and stimuli-responsive anti-counterfeiting

Eco-friendly lead-free halide perovskites have emerged as promising materials for multiple applications due to their unique optoelectronic properties. In this work, we investigate the ammonia (NH3)-sensitive CsCu2I3 film for its potential in NH3 sensor and stimuli-responsive fluorescence anti-counterfeiting. CsCu2I3-based NH3 sensor demonstrates a high response to NH3 (△R/R0 = 1.07, at 100 ppm NH3) with rapid response/recovery time (21/19 s), as well as favorable gas selectivity. We proposed a potential NH3 sensing mechanism with the help of a series of semi-quantitative characterizations and excitation-dependent emission experiments. The electron-donating NH3 molecules can efficiently donate electrons to the p-type CsCu2I3 film, bringing about a decrease in film conductivity. Additionally, the adsorption of NH3 can also disorder the CsCu2I3 crystals with a high density of trap states, facilitating an energy transfer from self-trapped excitons (STEs) emission to defect-related emission, along with bright orange luminescence. Inspired by this phenomenon, we proposed a novel application of NH3-induced stimuli-responsive fluorescence for anti-counterfeiting. The results highlight the potential of CsCu2I3 for effective dual-function applications in gas sensors and gas-triggered anti-counterfeiting.

A Prototype of Graphene E-Nose for Exhaled Breath Detection and Label-Free Diagnosis of Helicobacter Pylori Infection

Helicobacter pylori (HP), a common microanaerobic bacteria that lives in the human mouth and stomach, is reported to infect ≈50% of the global population. The current diagnostic methods for HP are either invasive, time-consuming, or harmful. Therefore, a noninvasive and label-free HP diagnostic method needs to be developed urgently. Herein, reduced graphene oxide (rGO) is composited with different metal-based materials to construct a graphene-based electronic nose (e-nose), which exhibits excellent sensitivity and cross-reactive response to several gases in exhaled breath (EB). Principal component analysis (PCA) shows that four typical types of gases in EB can be well discriminated. Additionally, the potential of the e-nose in label-free detection of HP infection is demonstrated through the measurement and analysis of EB samples. Furthermore, a prototype of an e-nose device is designed and constructed for automatic EB detection and HP diagnosis. The accuracy of the prototype machine integrated with the graphene-based e-nose can reach 92% and 91% in the training and validation sets, respectively. These results demonstrate that the highly sensitive graphene-based e-nose has great potential for the label-free diagnosis of HP and may become a novel tool for non-invasive disease screening and diagnosis.

Phase-Engineered MoSe2/CeO2 Composites for Room-Temperature Gas Sensing with a Drastic Discrimination of NH3 and TEA Gases

Detecting and distinguishing between hazardous gases with similar odors by using conventional sensor technology for safeguarding human health and ensuring food safety are significant challenges. Bulky, costly, and power-hungry devices, such as that used for gas chromatography-mass spectrometry (GC-MS), are widely employed for gas sensing. Using a single chemiresistive semiconductor or electric nose (e-nose) gas sensor to achieve this objective is difficult, mainly because of its selectivity issue. Thus, there is a need to develop new materials with tunable and versatile sensing characteristics. Phase engineering of two-dimensional materials to better utilize their physiochemical properties has attracted considerable attention. Here, we show that MoSe2 phase-transition/CeO2 composites can be effectively used to distinguish ammonia (NH3) and triethylamine (TEA) at room temperature. The phase transition of nanocomposite samples from semimetallic (1T) to semiconducting (2H) prepared at different synthesis temperatures is confirmed via X-ray photoelectron spectroscopy (XPS). A composite sensor in which the 2H phase of MoSe2 is predominant lacks discrimination capability and is less responsive to NH3 and TEA. An MoSe2/CeO2 composite sensor with a higher 1T phase content exhibits high selectivity for NH3, whereas one with a higher 2H phase content (2H > 1T) shows more selective behavior toward TEA. For example, for 50% relative humidity, the MoSe2/CeO2 sensor's signal changes from the baseline by 45% and 58% for 1 ppm of NH3 and TEA, respectively, indicating a low limit of detection (LOD) of 70 and 160 ppb, respectively. The composites' superior sensing characteristics are mainly attributed to their large specific surface area, their numerous active sites, presence of defects, and the n-n type heterojunction between MoSe2 and CeO2. The sensing mechanism is elucidated using Raman spectroscopy, XPS, and GC-MS results. Their phase-transition characteristics render MoSe2/CeO2 sensors promising for use in distributed, low-cost, and room-temperature sensor networks, and they offer new opportunities for the development of integrated advanced smart sensing technologies for environmental and healthcare.

Recent Excellent Optoelectronic Applications Based on Two-Dimensional WS2 Nanomaterials: A Review

Tungsten disulfide (WS2) is a promising material with excellent electrical, magnetic, optical, and mechanical properties. It is regarded as a key candidate for the development of optoelectronic devices due to its high carrier mobility, high absorption coefficient, large exciton binding energy, polarized light emission, high surface-to-volume ratio, and tunable band gap. These properties contribute to its excellent photoluminescence and high anisotropy. These characteristics render WS2 an advantageous material for applications in light-emitting devices, memristors, and numerous other devices. This article primarily reviews the most recent advancements in the field of optoelectronic devices based on two-dimensional (2D) nano-WS2. A variety of advanced devices have been considered, including light-emitting diodes (LEDs), sensors, field-effect transistors (FETs), photodetectors, field emission devices, and non-volatile memory. This review provides a guide for improving the application of 2D WS2 through improved methods, such as introducing defects and doping processes. Moreover, it is of great significance for the development of transition-metal oxides in optoelectronic applications.

Resistive gas sensors for the detection of NH3gas based on 2D WS2, WSe2, MoS2, and MoSe2: a review

Transition metal dichalcogenides (TMDs) with a two-dimensional (2D) structure and semiconducting features are highly favorable for the production of NH3gas sensors. Among the TMD family, WS2, WSe2, MoS2, and MoSe2exhibit high conductivity and a high surface area, along with high availability, reasons for which they are favored in gas-sensing studies. In this review, we have discussed the structure, synthesis, and NH3sensing characteristics of pristine, decorated, doped, and composite-based WS2, WSe2, MoS2, and MoSe2gas sensors. Both experimental and theoretical studies are considered. Furthermore, both room temperature and higher temperature gas sensors are discussed. We also emphasized the gas-sensing mechanism. Thus, this review provides a reference for researchers working in the field of 2D TMD gas sensors.

Catalytic synergy of WS2-anchored PdSe2 for highly sensitive hydrogen gas sensor

Hydrogen (H2) is widely used in industrial processes and is one of the well-known choices for storage of renewable energy. H2 detection has become crucial for safety in manufacturing, storage, and transportation due to its strong explosivity. To overcome the issue of explosion, there is a need for highly selective and sensitive H2 sensors that can function at low temperatures. In this research, we have adequately fabricated an unreported van der Waals (vdWs) PdSe2/WS2 heterostructure, which exhibits exceptional properties as a H2 sensor. The formation of these heterostructure devices involves the direct selenization process using chemical vapor deposition (CVD) of Pd films that have been deposited on the substrate of SiO2/Si by DC sputtering, followed by drop casting of WS2 nanoparticles prepared by a hydrothermal method onto device substrates including pre-patterned electrodes. The confirmation of the heterostructure has been done through the utilization of powder X-ray diffraction (XRD), depth-dependent X-ray photoelectron spectroscopy (XPS) and field-emission scanning electron microscopy (FE-SEM) techniques. Also, the average roughness of thin films is decided by Atomic Force Microscopy (AFM). The comprehensive research shows that the PdSe2/WS2 heterostructure-based sensor produces a response that is equivalent to 67.4% towards 50 ppm H2 at 100 °C. The response could be a result of the heterostructure effect and the superior selectivity for H2 gas in contrast to other gases, including NO2, CH4, CO and CO2, suggesting tremendous potential for H2 detection. Significantly, the sensor exhibits fast response and a recovery time of 31.5 s and 136.6 s, respectively. Moreover, the explanation of the improvement in gas sensitivity was suggested by exploiting the energy band positioning of the PdSe2/WS2 heterostructure, along with a detailed study of variations in the surface potential. This study has the potential to provide a road map for the advancement of gas sensors utilizing two-dimensional (2D) vdWs heterostructures, which exhibit superior performance at low temperatures.

Functionalized Multiwalled Carbon Nanotubes for Highly Stable Room Temperature and Humidity-Tolerant Triethylamine Sensing

Triethylamine (TEA) poses a significant threat to our health and is extremely difficult to detect at the parts-per-billion (ppb) level at room temperature. Carbon nanotubes (CNTs) are versatile materials used in chemiresistive vapor sensing. However, achieving high sensitivity and selectivity with a low detection limit remains a challenge for pristine CNTs, hindering their widespread commercial application. To address these issues, we propose functionalized multiwalled CNTs (MWCNTs) with carboxylic acid (COOH)-based sensing channels for ultrasensitive TEA detection under ambient conditions. Advanced structural analyses confirmed the necessary modification of MWCNTs after functionalization. The sensor exhibited excellent sensitivity to TEA in air, with a superior noise-free signal (10 ppb), an extremely low limit of detection (LOD ≈ 0.8 ppb), excellent repeatability, and long-term stability under ambient conditions. Moreover, the response values became more stable, demonstrating excellent humidity resistance (40-80% RH). Notably, the functionalized MWCNT sensor exhibited improved response and recovery kinetics (200 and 400 s) to 10 ppm of TEA compared to the pristine MWCNT sensor (400 and 1300 s), and the selectivity coefficient for TEA gas was improved by approximately three times against various interferants, including ammonia, formaldehyde, nitrogen dioxide, and carbon monoxide. The remarkable improvements in TEA detection were mainly associated with the large specific surface area, abundant active sites, adsorbed oxygen, and other defects. The sensing mechanism was thoroughly explained by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and gas chromatography-mass spectrometry (GC-MS). This study provides a new platform for CNT-based chemiresistive sensors with high selectivity, low detection limits, and enhanced precision with universal potential for applications in food safety and environmental monitoring.

Phase-Dependent Dual Discrimination of MoSe2/MoO3 Composites Toward N,N-Dimethylformamide and Triethylamine at Room Temperature

Herein, we present, a chemiresistive-type gas sensor composed of two-dimensional 1T-2H phase MoSe2 and MoO3. Mixed phase MoSe2 and MoSe2/MoO3 composites were synthesized via a facile hydrothermal method. The structure analysis using X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy revealed the formation of different phases of MoSe2 at different temperatures. With increase in synthesis temperature from 180 to 200 °C, the relative percentage of 1T and 2H-MoSe2 phases changed from 80 to 48%. On the other hand, at 220 °C, 2H-MoSe2 was obtained as a major component. The gas sensing properties of individual MoSe2 and composites were investigated at room temperature toward various analytes. The obtained results revealed that composites possess improved sensing features as compared with individual MoSe2 or MoO3. Data also revealed that the composite with dominating 1T-phase exhibits relatively higher response (10%, at 10 ppm) for dimethylformamide (DMF) compared to triethylamine (TEA) (3%, at 10 ppm). In contrast, the composite with larger 2H-phase exhibited affinity toward TEA and had a relative response of about 2%. Therefore, selectivity of a sensor device can be tuned by an appropriately designed MoSe2/MoO3 composite. These results signify the importance of MoO3-based composites with dual-phase MoSe2 for successfully discriminating between DMF and TEA at room-temperature.

Highly Selective NH3 Sensor Based on MoS2/WS2 Heterojunction

In this paper, the heterostructure of MoS₂/WS₂ was prepared by a hydrothermal method; the n-n heterostructure was demonstrated using TEM combined with Mott-Schottky analysis. The valence and conduction band positions were further identified by the XPS valence band spectra. The NH₃-sensing properties were assessed at room temperature by changing the mass ratio of the MoS₂ and WS₂ components. The 50 wt%-MoS₂/WS₂ sample exhibited the best performance, with a peak response of 23643% to NH₃ at a concentration of 500 ppm, a minimum detection limit of 20 ppm, and a fast recovery time of 2.6 s. Furthermore, the composites-based sensors demonstrated an excellent humidity immune property with less than one order of magnitude in the humidity range of 11-95% RH, revealing the practical application value of these sensors. These results suggest that the MoS₂/WS₂ heterojunction is an intriguing candidate for fabricating NH₃ sensors.

Ultrasensitive Room-Temperature NO2 Detection Using SnS2/MWCNT Composites and Accelerated Recovery Kinetics by UV Activation

High performance with lower power consumption is one among the essential features of a sensing device. Minute traces of hazardous gases such as NO₂ are difficult to detect. Tin disulfide (SnS₂) nanosheets have emerged as a promising NO₂ sensor. However, their poor room-temperature conductivity gives rise to inferior sensitivity and sluggish recovery rates, thereby hindering their applications. To mitigate this problem, we present a low-cost ultrasensitive NO₂ gas sensor with tin disulfide/multiwalled carbon nanotube (SnS₂/MWCNT) nanocomposites, prepared using a single-step hydrothermal method, as sensing elements. Relative to pure SnS₂, the conductivity of nanocomposites improved significantly. The sensor displayed a decrease in resistance when exposed to NO₂, an oxidizing gas, and exhibited p-type conduction, also confirmed in separate Mott-Schottky measurements. At a temperature of 20 °C, the sensor device has a relative response of about ≈5% (3%) for 25 ppb (1 ppb) of NO₂ with complete recovery in air (10 min) and excellent recovery rates with UV activation (0.3 min). A theoretical lower limit of detection (LOD) of 7 ppt implies greater sensitivity than all previously reported SnS₂-based gas sensors, to the best of our knowledge. The improved sensing characteristics were attributed to the formation of nano p-n heterojunctions, which enhances the charge transport and gives rise to faster response. The composite sensor also demonstrated good NO₂ selectivity against a variety of oxidizing and reducing gases, as well as excellent stability and long-term durability. This work will provide a fresh perspective on SnS₂-based composite materials for practical gas sensors.

Heterojunctions on Ta2O5@MWCNT for Ultrasensitive Ethanol Sensing at Room Temperature

Heterojunctions of Ta₂O₅ and multiwalled carbon nanotubes (MWCNTs) have been successfully synthesized by a facile and cost-effective hydrothermal method, with a super thin and uniform Ta₂O₅ shell wrapped around the MWCNT. The combination of Ta₂O₅ and MWCNTs at the interface not only modifies the morphology but also forms the p-n heterojunction, which contributes to the reconstruction of band structure, as well as the low resistance of matrix and highly chemisorbed oxygen content. The Ta₂O₅@MWCNT p-n heterojunction exhibits ultrasensitive performance to ethanol at room temperature, with a response of 3.15 toward 0.8 ppm ethanol and a detection limit of 0.173 ppm. The sensor has a high reproducibility at various concentrations of ethanol, superior selectivity to other gases, and long-term stability. The strategy of hybriding metal oxide semiconductors with MWCNT promises to provide a feasible and further developable pathway for high-performance room-temperature gas sensors.

Recent Progress on Anti-Humidity Strategies of Chemiresistive Gas Sensors

In recent decades, chemiresistive gas sensors (CGS) have been widely studied due to their unique advantages of expedient miniaturization, simple fabrication, easy operation, and low cost. As one ubiquitous interference factor, humidity dramatically affects the performance of CGS, which has been neglected for a long time. With the rapid development of technologies based on gas sensors, including the internet of things (IoT), healthcare, environment monitoring, and food quality assessing, the humidity interference on gas sensors has been attracting increasing attention. Inspiringly, various anti-humidity strategies have been proposed to alleviate the humidity interference in this field; however, comprehensive summaries of these strategies are rarely reported. Therefore, this review aims to summarize the latest research advances on humidity-independent CGS. First, we discussed the humidity interference mechanism on gas sensors. Then, the anti-humidity strategies mainly including surface engineering, physical isolation, working parameters modulation, humidity compensation, and developing novel gas-sensing materials were successively introduced in detail. Finally, challenges and perspectives of improving the humidity tolerance of gas sensors were proposed for future research.

Assembly of Core/Shell Nanospheres of Amorphous Hemin/Acetone-Derived Carbonized Polymer with Graphene Nanosheets for Room-Temperature NO Sensing

Implementing parts per billion-level nitric oxide (NO) sensing at room temperature (RT) is still in extreme demand for monitoring inflammatory respiratory diseases. Herein, we have prepared a kind of core-shell structural Hemin-based nanospheres (Abbr.: Hemin-nanospheres, defined as HNSs) with the core of amorphous Hemin and the shell of acetone-derived carbonized polymer, whose core-shell structure was verified by XPS with argon-ion etching. Then, the HNS-assembled reduced graphene oxide composite (defined as HNS-rGO) was prepared for RT NO sensing. The acetone-derived carbonized polymer shell not only assists the formation of amorphous Hemin core by disrupting their crystallization to release more Fe-N₄ active sites, but provides protection to the core. Owing to the unique core-shell structure, the obtained HNS-rGO based sensor exhibited superior RT gas sensing properties toward NO, including a relatively higher response (R_a/R_g = 5.8, 20 ppm), a lower practical limit of detection (100 ppb), relatively reliable repeatability (over 6 cycles), excellent selectivity, and much higher long-term stability (less than a 5% decrease over 120 days). The sensing mechanism has also been proposed based on charge transfer theory. The superior gas sensing properties of HNS-rGO are ascribed to the more Fe-N₄ active sites available under the amorphous state of the Hemin core and to the physical protection by the shell of acetone-derived carbonized polymer. This work presents a facile strategy of constructing a high-performance carbon-based core-shell nanostructure for gas sensing.