Surface-Embedded Liquid Metal Electrodes with Abrasion Resistance via Direct Magnetic Printing

Permeable and Durable Liquid-Metal Fiber Mat as Implantable Physiological Electrodes with Long-Term Biocompatibility

Implantable physiological electrodes provide unprecedented opportunities for real-time and uninterrupted monitoring of biological signals. Most implantable electronics adopt thin-film substrates with low permeability that severely hampers tissue metabolism, impeding their long-term biocompatibility. Recent innovations have seen the advent of permeable electronics through the strategic modification of liquid metals (LMs) onto porous substrates. However, the durability of these electronics is limited by the inherent poor wettability of LMs, particularly within the intricate 3D skeleton of the porous substrate. Herein, the study reports a spatial wettability tuning strategy that solves the wettability issue of LMs within the porous substrates, enabling the LM physiological electrodes with high durability and long-term biocompatibility. The study demonstrates the use of the electrodes as implantable neural interface to realize in vivo acquisition of electrocardiograph and electrocorticogram signals with long-term biocompatibility and high signal-to-noise ratio. This work demonstrates a promising direction for rational design of durable implantable bioelectronics with long-term biocompatibility.

Liquid Metal-Polymer Conductor-Based Conformal Cyborg Devices

Gallium-based liquid metal (LM) exhibits exceptional properties such as high conductivity and biocompatibility, rendering it highly valuable for the development of conformal bioelectronics. When combined with polymers, liquid metal-polymer conductors (MPC) offer a versatile platform for fabricating conformal cyborg devices, enabling functions such as sensing, restoration, and augmentation within the human body. This review focuses on the synthesis, fabrication, and application of MPC-based cyborg devices. The synthesis of functional materials based on LM and the fabrication techniques for MPC-based devices are elucidated. The review provides a comprehensive overview of MPC-based cyborg devices, encompassing their applications in sensing diverse signals, therapeutic interventions, and augmentation. The objective of this review is to serve as a valuable resource that bridges the gap between the fabrication of MPC-based conformal devices and their potential biomedical applications.

A Guide to Printed Stretchable Conductors

Printing of stretchable conductors enables the fabrication and rapid prototyping of stretchable electronic devices. For such applications, there are often specific process and material requirements such as print resolution, maximum strain, and electrical/ionic conductivity. This review highlights common printing methods and compatible inks that produce stretchable conductors. The review compares the capabilities, benefits, and limitations of each approach to help guide the selection of a suitable process and ink for an intended application. We also discuss methods to design and fabricate ink composites with the desired material properties (e.g., electrical conductance, viscosity, printability). This guide should help inform ongoing and future efforts to create soft, stretchable electronic devices for wearables, soft robots, e-skins, and sensors.

Breakup-Free and Colorful Liquid Metal Thin Films via Electrochemical Oxidation

Thin-film metal conductors featuring high conductivity and stretchability are basic building blocks for high-performance conformable electronics. Gallium-based liquid metals are attractive candidates for thin-film conductors due to their intrinsic stretchability and ease of processing. Moreover, the phase change nature of liquid metal provides an opportunity to create conformal electronics in a substrate-free manner. However, thin liquid metal films tend to break during the solid-to-liquid transition due to the high surface tension of liquid metal. Here, we created breakup-free liquid metal thin films by the electrochemical oxidation of solid gallium films. We show that electrochemical oxidation can enhance the mechanical strength of the gallium oxide layer and its interfacial adhesion to the gallium core. When heated to the liquid state, the oxidized gallium films can maintain their structural integrity on various solid substrates, hydrogels, and even the water surface. The solid-liquid phase change-induced stiffness decrease allowed the gallium films to be conformably attached to various nonplanar surfaces upon heating or water transfer printing. Moreover, we also found that enhanced electrochemical oxidation can result in the formation of structure color due to nanoporous structures on the film surface. We also demonstrate the applications of oxidized liquid metal films in functional electronics, electrophysiological monitoring, and tattoo art.

Highly Stable Liquid Metal Conductors with Superior Electrical Stability and Tough Interface Bonding for Stretchable Electronics

Ga-based liquid metal stretchable conductors have recently gained interest in flexible electronic devices such as electrodes, antennas, and sensors. It is essential to maintain electrical stability under strain or cyclic strain for reliable data acquisition and exhibit tough interfacial bonding between liquid metal and polymers to prevent performance loss and device failure. Herein, a highly stable conductor with superior electrical stability and tough interface bonding is introduced by casting curable polymers and a peeling-activated process from liquid metal particles. Based on the compensating effect of liquid metal, similar to the recharge relationship of water between rivers and lakes in nature, the conductor is not only strain-insensitive (ΔR/R₀ < 10% for 100% strain) but also immune to cyclic deformation (ΔR/R₀ < 7% with 5000 stretching cycles at 50% strain). Embedding liquid metal within the elastomer to create stretchable conductors effectively improves interfacial adhesion properties (the fluid-solid interfacial adhesion force increases from 0.48 to 0.62 mN/mm²). The constructed tough interface could even withstand sonication treatment. Finally, by combining strategies in material design and fabrication, an integrated array composed of vertical interconnect access and robust electrodes is fabricated, which simultaneously holds tough interfacial bonding with the upper and lower layers.

Liquid Metal-Based Electronics for On-Skin Healthcare

Wearable devices are receiving growing interest in modern technologies for realizing multiple on-skin purposes, including flexible display, flexible e-textiles, and, most importantly, flexible epidermal healthcare. A 'BEER' requirement, i.e., biocompatibility, electrical elasticity, and robustness, is first proposed here for all the on-skin healthcare electronics for epidermal applications. This requirement would guide the designing of the next-generation on-skin healthcare electronics. For conventional stretchable electronics, the rigid conductive materials, e.g., gold nanoparticles and silver nanofibers, would suffer from an easy-to-fail interface with elastic substrates due to a Young's modulus mismatch. Liquid metal (LM) with high conductivity and stretchability has emerged as a promising solution for robust stretchable epidermal electronics. In addition, the fundamental physical, chemical, and biocompatible properties of LM are illustrated. Furthermore, the fabrication strategies of LM are outlined for pure LM, LM composites, and LM circuits based on the surface tension control. Five dominant epidermal healthcare applications of LM are illustrated, including electrodes, interconnectors, mechanical sensors, thermal management, and biomedical and sustainable applications. Finally, the key challenges and perspectives of LM are identified for the future research vision.

Recent progress in fiber-based soft electronics enabled by liquid metal

Soft electronics can seamlessly integrate with the human skin which will greatly improve the quality of life in the fields of healthcare monitoring, disease treatment, virtual reality, and human-machine interfaces. Currently, the stretchability of most soft electronics is achieved by incorporating stretchable conductors with elastic substrates. Among stretchable conductors, liquid metals stand out for their metal-grade conductivity, liquid-grade deformability, and relatively low cost. However, the elastic substrates usually composed of silicone rubber, polyurethane, and hydrogels have poor air permeability, and long-term exposure can cause skin redness and irritation. The substrates composed of fibers usually have excellent air permeability due to their high porosity, making them ideal substrates for soft electronics in long-term applications. Fibers can be woven directly into various shapes, or formed into various shapes on the mold by spinning techniques such as electrospinning. Here, we provide an overview of fiber-based soft electronics enabled by liquid metals. An introduction to the spinning technology is provided. Typical applications and patterning strategies of liquid metal are presented. We review the latest progress in the design and fabrication of representative liquid metal fibers and their application in soft electronics such as conductors, sensors, and energy harvesting. Finally, we discuss the challenges of fiber-based soft electronics and provide an outlook on future prospects.