Catalyst-Free, Selective Growth of ZnO Nanowires on SiO2 by Chemical Vapor Deposition for Transfer-Free Fabrication of UV Photodetectors

Catalyst-Free Polymorphic β-Ga2O3 Nanomaterials for Solar-Blind Optoelectronic Devices: Applications in Imaging and Neural Communication

The continuous advancements in ultraviolet-C (UV-C) optoelectronics are poised to meet the growing demand for efficient and innovative optoelectronic devices, particularly in image sensing and neural communication. This study proposes a low-cost tube sealing and muffle calcination process for the catalyst-free synthesis of polymorphic β-Ga2O3 nanomaterials. These nanomaterials are synthesized via a vapor-solid (VS) growth mechanism, enabling the formation of high-quality nanowires (NWs), nanobelts (NBs), and nanosheets (NSs). UV-C photodetectors (PDs) fabricated with β-Ga2O3 nanobelts demonstrated exceptional performance, exhibiting a responsivity of 4.62 × 105 A W-1 and a specific detectivity of 4.78 × 1012 Jones under 254 nm light. This PD enabled high-sensitivity and high-contrast UV-C imaging, effectively capturing the letters "CNU" and a "Panda" pattern. Additionally, the β-Ga2O3 nanowire-based optoelectronic synapse (OES) device displayed efficient light sensing and significant persistent photoconductivity, accurately mimicking synaptic behaviors such as short-term to long-term memory transitions and memory reinforcement. The OES device is successfully integrated into a wireless optical communication system, effectively simulating neural signal transmission by outputting the current waveform signal of "CNU 1954" and exhibiting notable UV-C light sensing and learning abilities. This work not only introduces a method for synthesizing polymorphic β-Ga2O3 nanomaterials but also underscores their potential in advanced UV-C optoelectronic applications, including image sensing and neural communication.

Advances in borophene based photodetectors for a sustainable tomorrow: a comprehensive review

Borophene, with its unique properties such as excellent conductivity, high thermal stability, and tunable electronic band structure, holds immense promise for advancing photodetector technology. These qualities make it an attractive material for enhancing the efficiency and performance of photodetectors across various wavelengths. Research so far has highlighted borophene's potential in improving sensitivity, response time, and overall functionality in optoelectronic devices. However, to fully realize the potential of borophene-based photodetectors, several challenges must be addressed. A major hurdle is the reproducibility and scalability of borophene synthesis, which is essential for its widespread use in practical applications. Furthermore, understanding the underlying physics of borophene and optimizing the device architecture are critical for achieving consistent performance under different operating conditions. These challenges must be overcome to enable the effective integration of borophene into commercial photodetector devices. A thorough evaluation of borophene-based photodetectors is necessary to guide future research and development in this field. This review will provide a detailed account of the current synthesis methods, discuss the experimental results, and identify the challenges that need to be addressed. Additionally, the review will explore potential strategies to overcome these obstacles, paving the way for significant advancements in solar cells, light-based sensors, and environmental monitoring systems. By addressing these issues, the development of borophene-based photodetectors could lead to substantial improvements in optoelectronic technology, benefiting various applications and industries.

Preparation and Mechanism Analysis of High-Performance Humidity Sensor Based on Eu-Doped TiO2

TiO2 is a typical semiconductor material, and it has attracted much attention in the field of humidity sensors. Doping is an efficient way to enhance the humidity response of TiO2. Eu-doped TiO2 material was investigated in both theoretical simulations and experiments. In a simulation based on density functional theory, a doped Eu atom can increase the performance of humidity sensors by producing more oxygen vacancies than undoped TiO2. In these experiments, Eu-doped TiO2 nanorods were prepared by hydrothermal synthesis, and the results also confirm the theoretical prediction. When the doping mole ratio is 5 mol%, the response of the humidity sensor reaches 23,997.0, the wet hysteresis is 2.3% and the response/recovery time is 3/13.1 s. This study not only improves the basis for preparation of high-performance TiO2 humidity sensors, but also fills the research gap on rare earth Eu-doped TiO2 as a humidity-sensitive material.

Density-controlled electrochemical synthesis of ZnO nanowire arrays using nanotextured cathode

Zinc oxide (ZnO) nanowires fabricated via wet chemical synthesis on flexible polymer substrates are inherently unstable against mechanical bending stress because of their high density and weak adhesion to the substrate. We introduce a novel method for controlling the density of such ZnO nanowire arrays using a three-dimensional corrugated metal substrate. These metal substrates, featuring extruded and recessed patterns fabricated via nanoimprint lithography, were employed as cathodes during the electrochemical deposition of ZnO nanowire arrays. The ZnO nanowire arrays synthesized on the patterned metal thin film exhibited smaller diameters and lower densities compared to those on non-patterned metal films. This reduction in density can be attributed to aligned nucleation and limited growth on the patterned metal surface. Crucially, ZnO nanowires synthesized on patterned metal substrates displayed remarkable mechanical robustness against external forces, a direct consequence of their reduced density. In contrast, nanowires synthesized on non-patterned metal substrates were broken under mechanical bending. Detailed morphological analyses performed after mechanical bending tests confirm that ZnO nanowires synthesized on nanoimprinted metal electrodes exhibited enhanced mechanical characteristics compared to those on non-patterned metal electrodes. These findings clearly demonstrate the promise of utilizing density-controlled ZnO nanowires in piezoelectric devices.

3D Printing of Multiscale Ti64-Based Lattice Electrocatalysts for Robust Oxygen Evolution Reaction

Electrically assisted water splitting is an endurable strategy for hydrogen production, but the sluggish kinetics of oxygen evolution reaction (OER) extremely restrict the large-scale production of hydrogen. Developing highly efficient and non-precious catalytic materials is essential to accelerate the sluggish kinetics of OER. However, currently used catalyst supports, such as copper foam, suffer from inferior corrosion resistance and structural stability, resulting in the disabled functionality of 3D conductive networks. To this end, a novel 3D freestanding electrode with corrosion-resistant and robust Ti-6Al-4V titanium alloy lattice as the catalyst support is designed via a 3D printing technology of selective laser melting. After the coating of core-shell Cu(OH)2@CoNi carbonate hydroxides (CoNiCH) on the designed lattice, a unique micro/nano-sized hierarchical porous structure is formed, which endows the electrocatalyst with a promising electrocatalytic activity (a low overpotential of 355 mV at 30 mA cm-2 and Tafel slope of 125.3 mV dec-1 ). Computational results indicate that the CoNiCH exhibits optimized electron transfer and the catalytic activity of the Ni site is higher than that of the Co site in the CoNiCH. Therefore, the integration of robust catalyst supports and highly active materials opens up an avenue for reliable and high-performance OER electrocatalysts.

Controlled Fabrication of Quality ZnO NWs/CNTs and ZnO NWs/Gr Heterostructures via Direct Two-Step CVD Method

A novel and advanced approach of growing zinc oxide nanowires (ZnO NWs) directly on single-walled carbon nanotubes (SWCNTs) and graphene (Gr) surfaces has been demonstrated through the successful formation of 1D–1D and 1D–2D heterostructure interfaces. The direct two-step chemical vapor deposition (CVD) method was utilized to ensure high-quality materials’ synthesis and scalable production of different architectures. Iron-based universal compound molecular ink was used as a catalyst in both processes (a) to form a monolayer of horizontally defined networks of SWCNTs interfaced with vertically oriented ZnO NWs and (b) to grow densely packed ZnO NWs directly on a graphene surface. We show here that our universal compound molecular ink is efficient and selective in the direct synthesis of ZnO NWs/CNTs and ZnO NWs/Gr heterostructures. Heterostructures were also selectively patterned through different fabrication techniques and grown in predefined locations, demonstrating an ability to control materials’ placement and morphology. Several characterization tools were employed to interrogate the prepared heterostructures. ZnO NWs were shown to grow uniformly over the network of SWCNTs, and much denser packed vertically oriented ZnO NWs were produced on graphene thin films. Such heterostructures can be used widely in many potential applications, such as photocatalysts, supercapacitors, solar cells, piezoelectric or thermal actuators, as well as chemical or biological sensors.

Metal–Oxide Nanowire Molecular Sensors and Their Promises

During the past two decades, one–dimensional (1D) metal–oxide nanowire (NW)-based molecular sensors have been witnessed as promising candidates to electrically detect volatile organic compounds (VOCs) due to their high surface to volume ratio, single crystallinity, and well-defined crystal orientations. Furthermore, these unique physical/chemical features allow the integrated sensor electronics to work with a long-term stability, ultra-low power consumption, and miniature device size, which promote the fast development of “trillion sensor electronics” for Internet of things (IoT) applications. This review gives a comprehensive overview of the recent studies and achievements in 1D metal–oxide nanowire synthesis, sensor device fabrication, sensing material functionalization, and sensing mechanisms. In addition, some critical issues that impede the practical application of the 1D metal–oxide nanowire-based sensor electronics, including selectivity, long-term stability, and low power consumption, will be highlighted. Finally, we give a prospective account of the remaining issues toward the laboratory-to-market transformation of the 1D nanostructure-based sensor electronics.

Functional nanoarrays for investigating stem cell fate and function

Stem cells show excellent potential in the field of tissue engineering and regenerative medicine based on their excellent capability to not only self-renew but also differentiate into a specialized cell type of interest. However, the lack of a non-destructive monitoring system makes it challenging to identify and characterize differentiated cells before their transplantation without compromising cell viability. Thus, the development of a non-destructive monitoring method for analyzing cell function is highly desired and can significantly benefit stem cell-based therapies. Recently, nanomaterial-based scaffolds (e.g., nanoarrays) have made possible considerable advances in controlling the differentiation of stem cells and characterization of the differentiation status sensitively in real time. This review provides a selective overview of the recent progress in the synthesis methods of nanoarrays and their applications in controlling stem cell fate and monitoring live cell functions electrochemically. We believe that the topics discussed in this review can provide brief and concise guidelines for the development of novel nanoarrays and promote the interest in live cell study applications. A method which can not only control but also monitor stem cell fate and function will be a promising technology that can accelerate stem cell therapies.

Directional Ostwald Ripening for Producing Aligned Arrays of Nanowires

The remarkable electronic and mechanical properties of nanowires have great potential for fascinating applications; however, the difficulties of assembling ordered arrays of aligned nanowires over large areas prevent their integration into many practical devices. In this paper, we show that aligned VO₂ nanowires form spontaneously after heating a thin V₂O₅ film on a grooved SiO₂ surface. Nanowires grow after complete dewetting of the film, after which there is the formation of supercooled nanodroplets and subsequent Ostwald ripening and coalescence. We investigate the growth mechanism using molecular dynamics simulations of spherical Lennard-Jones particles, and the simulations help explain how the grooved surface produces aligned nanowires. Using this simple synthesis approach, we produce self-aligned, millimeter-long nanowire arrays with uniform metal-insulator transition properties; after their transfer to a polymer substrate, the nanowires act as a highly sensitive array of strain sensors with a very fast response time of several tens of milliseconds.

Negative photoresponse in ZnO-PEDOT:PSS nanocomposites and photogating effects

We report negative photoresponse or increase of resistance in nanocomposites of n-type ZnO nanoparticles dispersed in a p-type polymer (PEDOT:PSS) under UV and visible light excitation, contrary to that of planar heterojunctions of the constituents. The underlying mechanism of charge transport, specifically negative photoresponse, is explored using spectroscopic and opto-electrical characterisation. Systemic variability in conductance, photoresponse sensitivity and rate with fractional nanoparticle loading in the nanocomposite is demonstrated. Here, photogenerated electrons in ZnO nanoparticles, trapped by the unbiased interfacial barrier, are understood to localize holes in the PEDOT:PSS conduction channel thereby increasing the overall nanocomposite resistance. Reversibility of the negative PR although with a slow decay rate bears testament to the proposed photogating mechanism as opposed to photocatalytic activity. Replacement of the p-type polymer with an electron transport matrix turns the negative photoresponse positive accentuating the role of the interfacial barrier in tuning the optoelectronic response of the composites. These hybrid materials and their unusual behaviour provide alternative strategies for building devices with novel photogating effects, exploiting the properties of their nanostructured forms.

Synthesis of ternary oxide Zn2GeO4 nanowire networks and their deep ultraviolet detection properties

Ternary oxide Zn₂GeO₄ with a wide bandgap of 4.84 eV, as a candidate for fourth generation semiconductors, has attracted a great deal of attention for deep ultraviolet (DUV) photodetector applications, because it is expected to be blind to the UV-A/B band (290–400 nm) and only responsive to the UV-C band (200–290 nm). Here, we report on the synthesis of Zn₂GeO₄ nanowire (NW) networks by lower pressure chemical vapor deposition and investigate their corresponding DUV detection properties. We find that pure Zn₂GeO₄ NWs could be obtained at a growth pressure of 1 kPa. The DUV detection tests reveal that growth pressure exerts a significant effect on DUV detection performance. The Zn₂GeO₄ NW networks produced under 1 kPa show an excellent solar-blind photoresponsivity with fast rise and decay times (t_rise ≈ 0.17 s and t_decay ≈ 0.14 s).

Ternary oxide Zn₂GeO₄ with a wide bandgap of 4.84 eV, as a candidate for fourth generation semiconductors, has attracted lots of attention for deep UV photodetector applications, as it is blind to the UV-A/B band and only responds to the UV-C band.

Coplanar-gate ZnO nanowire field emitter arrays with enhanced gate-control performance using a ring-shaped cathode

Nanowire field emitters have great potential for use as large-area gated field emitter arrays (FEAs). However, the micrometer-scale cathode patterns in gated FEA devices will reduce regulation of the gate voltage and limit the field emission currents of these devices as a result of field-screening effect among the neighboring nanowires. In this article, a ring-shaped ZnO nanowire pad is proposed to overcome this problem. Diode measurements show that the prepared ring-shaped ZnO nanowire pad arrays shows uniform emission with a turn-on field of 5.9 V/µm and a field emission current density of 4.6 mA/cm² under an applied field of 9 V/µm. The ZnO nanowire pad arrays were integrated into coplanar-gate FEAs and enhanced gate-controlled device characteristics were obtained. The gate-controlled capability was studied via microscopic in-situ measurements of the field emission from the ZnO nanowires in the coplanar-gate FEAs. Based on the results of both simulations and experiments, we attributed the enhanced gate-controlled device capabilities to more efficient emission of electrons from the ZnO nanowires as a result of the increase edge area by designing ring-shaped ZnO nanowire pad. The results are important to the realization of large-area gate-controlled FEAs based on nanowire emitters for use in vacuum electronic devices.

Paper/Carbon Nanotube-Based Wearable Pressure Sensor for Physiological Signal Acquisition and Soft Robotic Skin

A wearable and flexible pressure sensor is essential to the realization of personalized medicine through continuously monitoring an individual's state of health and also the development of a highly intelligent robot. A flexible, wearable pressure sensor is fabricated based on novel single-wall carbon nanotube /tissue paper through a low-cost and scalable approach. The flexible, wearable sensor showed superior performance with concurrence of several merits, including high sensitivity for a broad pressure range and an ultralow energy consumption level of 10^-6 W. Benefited from the excellent performance and the ultraconformal contact of the sensor with an uneven surface, vital human physiological signals (such as radial arterial pulse and muscle activity at various positions) can be monitored in real time and in situ. In addition, the pressure sensors could also be integrated onto robots as the artificial skin that could sense the force/pressure and also the distribution of force/pressure on the artificial skin.

Flexible cellulose and ZnO hybrid nanocomposite and its UV sensing characteristics

This paper reports the synthesis and UV sensing characteristics of a cellulose and ZnO hybrid nanocomposite (CEZOHN) prepared by exploiting the synergetic effects of ZnO functionality and the renewability of cellulose. Vertically aligned ZnO nanorods were grown well on a flexible cellulose film by direct ZnO seeding and hydrothermal growing processes. The ZnO nanorods have the wurtzite structure and an aspect ratio of 9 ~ 11. Photoresponse of the prepared CEZOHN was evaluated by measuring photocurrent under UV illumination. CEZOHN shows bi-directional, linear and fast photoresponse as a function of UV intensity. Electrode materials, light sources, repeatability, durability and flexibility of the prepared CEZOHN were tested and the photocurrent generation mechanism is discussed. The silver nanowire coating used for electrodes on CEZOHN is compatible with a transparent UV sensor. The prepared CEZOHN is flexible, transparent and biocompatible, and hence can be used for flexible and wearable UV sensors.

Simple and scalable growth of AgCl nanorods by plasma-assisted strain relaxation on flexible polymer substrates

Implementing nanostructures on plastic film is indispensable for highly efficient flexible optoelectronic devices. However, due to the thermal and chemical fragility of plastic, nanostructuring approaches are limited to indirect transfer with low throughput. Here, we fabricate single-crystal AgCl nanorods by using a Cl₂ plasma on Ag-coated polyimide. Cl radicals react with Ag to form AgCl nanorods. The AgCl is subjected to compressive strain at its interface with the Ag film because of the larger lattice constant of AgCl compared to Ag. To minimize strain energy, the AgCl nanorods grow in the [200] direction. The epitaxial relationship between AgCl (200) and Ag (111) induces a strain, which leads to a strain gradient at the periphery of AgCl nanorods. The gradient causes a strain-induced diffusion of Ag atoms to accelerate the nanorod growth. Nanorods grown for 45 s exhibit superior haze up to 100% and luminance of optical device increased by up to 33%.

All-inkjet-printed flexible ZnO micro photodetector for a wearable UV monitoring device

Fabrication of small-sized patterns of inorganic semiconductor onto flexible substrates is a major concern when manufacturing wearable devices for measuring either biometric or environmental parameters. In this study, micro-sized flexible ZnO UV photodetectors have been thoroughly prepared by a facile inkjet printing technology and followed with heat treatments. A simple ink recipe of zinc acetate precursor solution was investigated. It is found that the substrate temperature during zinc precursor ink depositing has significant effects on ZnO pattern shape, film morphology, and crystallization. The device fabricated from the additive manufacturing approach has good bendability, Ohmic contact, short response time as low as 0.3 s, and high on/off ratio of 3525. We observed the sensor's dependence of response/decay time by the illuminating UV light intensity. The whole process is based on additive manufacturing which has many benefits such as rapid prototyping, saving material, being environmentally friendly, and being capable of creating high-resolution patterns. In addition, this method can be applied to flexible substrates, which makes the device more applicable for applications requiring flexibility such as wearable devices. The proposed all-inkjet-printing approach for a micro-sized ZnO UV photodetector would significantly simplify the fabrication process of micro-sized inorganic semiconductor-based devices. A potential application is real-time monitoring of UV light exposure to warn users about unsafe direct sunlight to implement suitable avoidance solutions.

Optimizing the Field Emission Properties of ZnO Nanowire Arrays by Precisely Tuning the Population Density and Application in Large-Area Gated Field Emitter Arrays

Zinc oxide (ZnO) nanowires are prepared for application in large area gated field emitter arrays (FEAs). By oxidizing Al-coated Zn films, the population density of the ZnO nanowires was tuned precisely by varying the thickness of the Al film. The nanowire density decreased linearly as the thickness of the Al film increased. Optimal field emission properties with a turn-on field of 6.21 V μm^-1 and current fluctuations less than 1% are obtained. This can be explained by the minimized screening effect and good electrical conductivity of the back-contact layer. The mechanism responsible for the linear variation in the nanowire density is investigated in detail. Addressable FEAs using the optimal ZnO nanowire cathodes were fabricated and applied in a display device. Good gate-controlled characteristics and the display of video images are realized. The results indicate that ZnO nanowires could be applied in large area FEAs.

Low-Voltage High-Performance UV Photodetectors: An Interplay between Grain Boundaries and Debye Length

Accurate detection of UV light by wearable low-power devices has many important applications including environmental monitoring, space to space communication, and defense. Here, we report the structural engineering of ultraporous ZnO nanoparticle networks for fabrication of very low-voltage high-performance UV photodetectors. A record high photo- to dark-current ratio of 3.3 × 10⁵ and detectivity of 3.2 × 10¹² Jones at an ultralow operation bias of 2 mV and low UV-light intensity of 86 μW·cm^-2 are achieved by controlling the interplay between grain boundaries and surface depletion depth of ZnO nanoscale semiconductors. An optimal window of structural properties is determined by varying the particle size of ultraporous nanoparticle networks from 10 to 42 nm. We find that small electron-depleted nanoparticles (≤40 nm) are necessary to minimize the dark-current; however, the rise in photocurrent is tampered with decreasing particle size due to the increasing density of grain boundaries. These findings reveal that nanoparticles with a size close to twice their Debye length are required for high photo- to dark-current ratio and detectivity, while further decreasing their size decreases the photodetector performance.

Inkjet-printed optoelectronics

Inkjet printing is a powerful and cost-effective technique for deposition of liquid inks with high accuracy, which is not only of great significance for graphic applications but also has enormous potential for the direct printing of optoelectronic devices. This review highlights a comprehensive overview of the progress that has been made in optoelectronics fabrication by the inkjet printing technique. The first part briefly covers the droplet-generation process in the nozzles of printheads and the physical properties affecting droplet formation and the profiles of the printed patterns. The second section outlines the recent activities related to applications of inkjet printing in optoelectronics fabrication including solar cells, light-emitting diodes, photodetectors and transparent electrodes. In each application field, the challenges with the inkjet printing process and the possible solutions are discussed before a few remarks. In the last section, a brief summary on the progress of inkjet printing fabrication of optoelectronics and an outlook for future research effort are presented.

High-efficiency piezoelectric micro harvester for collecting low-frequency mechanical energy

A single-layer zinc oxide (ZnO) nanorod array-based micro energy harvester was designed and integrated with a piezoelectric metacapacitor. The device presents outstanding low-frequency (1-10 Hz) mechanical energy harvesting capabilities. When compared with conventional pristine ZnO nanostructured piezoelectric harvesters or generators, both open-circuit potential and short-circuit current are significantly enhanced (up to 3.1 V and 124 nA cm^-2) for a single mechanical knock (∼34 kPa). Higher electromechanical conversion efficiency (1.3 pC/Pa) is also observed. The results indicate that the integration of the piezoelectric metacapacitor is a crucial factor for improving the low-frequency energy harvesting performance. A double piezoelectric-driven mechanism is proposed to explain current higher output power, in which the metacapacitor plays the multiple roles of charge pumping, storing and transferring. An as-fabricated prototype device for lighting an LED demonstrates high power transference capability, with over 95% transference efficiency to the external load.

Spatially resolved photoresponse on individual ZnO nanorods: correlating morphology, defects and conductivity

Electrically active native point defects have a significant impact on the optical and electrical properties of ZnO nanostructures. Control of defect distribution and a detailed understanding of their physical properties are central to designing ZnO in novel functional forms and architecture, which ultimately decides device performance. Defect control is primarily achieved by either engineering nanostructure morphology by tailoring growth techniques or doping. Here, we report conducting atomic force microscopy studies of spatially resolved photoresponse properties on ZnO nanorod surfaces. The photoresponse for super-band gap, ultraviolet excitations show a direct correlation between surface morphology and photoactivity localization. Additionally, the system exhibits significant photoresponse with sub-bandgap, green illumination; the signature energy associated with the deep level oxygen vacancy states. While the local current-voltage characteristics provide evidence of multiple transport processes and quantifies the photoresponse, the local time-resolved photoresponse data evidences large variations in response times (90 ms-50 s), across the surface of a nanorod. The spatially varied photoconductance and the range in temporal response display a complex interplay of morphology, defects and connectivity that brings about the true colour of these ZnO nanostructures.

Enhancement of Trap-Assisted Green Electroluminescence Efficiency in ZnO/SiO2/Si Nanowire Light-Emitting Diodes on Bendable Substrates by Piezophototronic Effect

The trap-assisted green electroluminescence (EL) efficiency of a light-emitting diode (LED) consisting of a ZnO nanowire (NW), a SiO2 layer, and a Si NW on a bendable substrate is enhanced by piezophototronic effect. The green EL originates from radiative recombination through deep-level defects such as interstitial zinc, interstitial oxygen, oxygen antisite, and zinc vacancy in the component ZnO NW. The efficiency of the trap-assisted green EL is enhanced by a piezophototronic factor of 2.79 under a strain of 0.006%. The piezoelectric field built up inside the component ZnO NW improves the recombination rate of the electron-hole pairs thereby enhancing the efficiency of the trap-assisted green EL.

Fabrication of ZnO nanowires array with nanodiamond as reductant

The availability of well-aligned high quality ZnO nanowires will extend the potential applications of such materials.