Incorporating Zwitterionic Graphene Oxides into Sodium Alginate Membrane for Efficient Water/Alcohol Separation

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

In situ assembly of silver nanoparticles throughout electrospun oriented alginate nanofibers for hazardous rust trace detection on bronze

A convenient and reliable surface-enhanced Raman scattering (SERS) substrate has been developed for the surface corrosion analysis of bronze artifacts. The substrate consists of oriented alginate nanofiber membranes containing silver nanoparticles (Ag NPs), which were obtained through electrostatic spinning, ion exchange, and in-situ reduction. By controlling the reduction time, Ag/alginate nanofiber membranes with different contents, sizes, and distributions were obtained. The Ag/alginate nanofiber#20 membranes, obtained with a reduction time of 20 min, reached a detection limit of 10-12 M for R6G with an enhancement factor of 6.64 × 107. In the trace detection of bronze patina, the intensity of the characteristic peaks of harmful patina located at 513, 846, 911, and 974 cm-1 were increased by more than 500 %. This was due to the uniform loading of a large number of Ag NPs on the surface of the nanofiber membrane obtained by reduction for 20 min, and the formation of a large number of hot spots between the oriented nanofibers. This significantly improved the SERS performance of the flexible substrate layer under the joint action with the Ag NPs. These results indicate that the flexible substrate layer can greatly enhance the Raman characteristic peaks of alkali copper chloride and be effectively used for trace analysis of the surface composition of bronze artifacts.

Structure-Thermodynamic Relationship of a Polysaccharide Gel (Alginate) as a Function of Water Content and Counterion Type (Na vs Ca)

Biofilms are the predominant mode of microbial life on Earth, and so a deep understanding of microbial communities─and their impacts on environmental processes─requires a firm understanding of biofilm properties. Because of the importance of biofilms to their microbial inhabitants, microbes have evolved different ways of engineering and reconfiguring the matrix of extracellular polymeric substances (EPS) that constitute the main non-living component of biofilms. This ability makes it difficult to distinguish between the biotic and abiotic origins of biofilm properties. An important route toward establishing this distinction has been the study of simplified models of the EPS matrix. This study builds on such efforts by using atomistic simulations to predict the nanoscale (≤10 nm scale) structure of a model EPS matrix and the sensitivity of this structure to interpolymer interactions and water content. To accomplish this, we use replica exchange molecular dynamics (REMD) simulations to generate all-atom configurations of ten 3.4 kDa alginate polymers at a range of water contents and Ca-Na ratios. Simulated systems are solvated with explicitly modeled water molecules, which allows us to capture the discrete structure of the hydrating water and to examine the thermodynamic stability of water in the gels as they are progressively dehydrated. Our primary findings are that (i) the structure of the hydrogels is highly sensitive to the identity of the charge-compensating cations, (ii) the thermodynamics of water within the gels (specific enthalpy and free energy) are, surprisingly, only weakly sensitive to cation identity, and (iii) predictions of the differential enthalpy and free energy of hydration include a short-ranged enthalpic term that promotes hydration and a longer-ranged (presumably entropic) term that promotes dehydration, where short and long ranges refer to distances shorter or longer than ∼0.6 nm between alginate strands.

Preparation of a CAB-GO/PES Mixed Matrix Ultrafiltration Membrane and Its Antifouling Performance

Serious membrane fouling has limited the development of ultrafiltration membrane technology for water purification. Synthesis of an ultrafiltration membrane with prominent anti-fouling ability is of vital importance. In this study, CAB-GO composite nanosheets were prepared by grafting graphene oxide (GO) with a zwitterionic material cocamidopropyl betaine (CAB) with strong antifouling properties. Anti-fouling CAB-GO/PES mixed matrix ultrafiltration membrane (CGM) was prepared by the phase inversion method with polyethersulfone (PES). Due to its electrostatic interaction, the interlayer distance between CAB-GO nanosheets was increased, and the dispersibility of GO was improved to large extent, thereby effectively avoiding the phenomenon of GO agglomeration in organic solvents. Based on the improvement of the surface porosity and surface hydrophilicity of the CAB-GO/PES mixed matrix membrane, the pure water flux of CGM-1.0 can reach 461 L/(m²·h), which was 2.5 times higher than that of the original PES membrane, and the rejection rates toward BSA and HA were above 96%. Moreover, when the content of CAB-GO was 0.1 wt%, the prepared CAB-GO/PES membrane exhibited very high BSA (99.1%) and HA (98.1%) rejection during long-term operation, indicating excellent anti-fouling ability.

Ultrathin Graphene Oxide-Based Nanocomposite Membranes for Water Purification

Two-dimensional graphene oxide (GO)-based lamellar membranes have been widely developed for desalination, water purification, gas separation, and pervaporation. However, membranes with a well-organized multilayer structure and controlled pore size remain a challenge. Herein, an easy and efficient method is used to fabricate MoO₂@GO and WO₃@GO nanocomposite membranes with controlled structure and interlayer spacing. Such membranes show good separation for salt and heavy metal ions due to the intensive stacking interaction and electrostatic attraction. The as-prepared composite membranes showed high rejection rates (˃70%) toward small metal ions such as sodium (Na⁺) and magnesium (Mg²⁺) ions. In addition, both membranes also showed high rejection rates ˃99% for nickel (Ni²⁺) and lead (Pb²⁺) ions with good water permeability of 275 ± 10 L m^-2 h^-1 bar^-1. We believe that our fabricated membranes will have a bright future in next generation desalination and water purification membranes.

Zwitterionic Biomaterials

The term "zwitterionic polymers" refers to polymers that bear a pair of oppositely charged groups in their repeating units. When these oppositely charged groups are equally distributed at the molecular level, the molecules exhibit an overall neutral charge with a strong hydration effect via ionic solvation. The strong hydration effect constitutes the foundation of a series of exceptional properties of zwitterionic materials, including resistance to protein adsorption, lubrication at interfaces, promotion of protein stabilities, antifreezing in solutions, etc. As a result, zwitterionic materials have drawn great attention in biomedical and engineering applications in recent years. In this review, we give a comprehensive and panoramic overview of zwitterionic materials, covering the fundamentals of hydration and nonfouling behaviors, different types of zwitterionic surfaces and polymers, and their biomedical applications.

Effect of Nanofillers on Properties and Pervaporation Performance of Nanocomposite Membranes: A Review

In recent years, a well-known membrane-based process called pervaporation (PV), has attracted remarkable attention due to its advantages for selective separation of a wide variety of liquid mixtures. However, some restrictions of polymeric membranes have led to research studies on developing membranes for efficient separation in the PV process. Recent studies have focused on preparation of nanocomposite membranes as an effective method to improve both selectivity and permeability of polymeric membranes. The present study provides a review of PV nanocomposite membranes for various applications. In this review, recent developments in the field of nanocomposite membranes, including the fabrication methods, characterization, and PV performance, are summarized.

Functionalized MOF-Derived Nanoporous Carbon as Compatible Nanofiller to Fabricate Defect-Free PDMS-Based Mixed Matrix Pervaporation Membranes

Metal-organic framework (MOF)-based polydimethylsiloxane mixed matrix membranes applied for alcohol recovery with high permeability and selectivity are drawing more and more attention. However, the design and fabrication of high-quality and stable MOF-based mixed matrix membrane for pervaporation are still a big challenge. Herein, PDMS functionalized MOF-derived nanoporous carbon (P-ZNC) was first explored as compatible nanofiller to mutually blend with polydimethylsiloxane on PVDF substrate to fabricate defect-free mixed matrix membranes via dip-coating and thermal cross-linkng. Induced by UV illumination, hydrophobic modification of MOF-derived nanoporous carbon was successfully realized under mild conditions within one step, simplifying the operation step. By using this facile strategy, we can not only solve the existing problem of agglomeration, but also covalently cross-link MOF derivative with polymeric matrix and effectively eliminate the interface defect between polymer and nanoparticles without any extra steps. The method also gives a good level of generality for the synthesis of versatile stable nanoporous MOF-derived carbon-based mixed matrix membranes on various supports. The prepared PDMS/P-ZNC with commendable structures possessed excellent separation performance in low concentration n-butanol recovery and had a good balance between permeance, selectivity, and stability.

Pervaporation as a Successful Tool in the Treatment of Industrial Liquid Mixtures

Pervaporation is one of the most active topics in membrane research, and it has time and again proven to be an essential component for chemical separation. It has been employed in the removal of impurities from raw materials, separation of products and by-products after reaction, and separation of pollutants from water. Given the global problem of water pollution, this approach is efficient in removing hazardous substances from water bodies. Conventional processes are based on thermodynamic equilibria involving a phase transition such as distillation and liquid-liquid extraction. These techniques have a relatively low efficacy and nowadays they are not recommended because it is not sustainable in terms of energy consumption and/or waste generation. Pervaporation emerged in the 1980s and is now becoming a popular membrane separation technology because of its intrinsic features such as low energy requirements, cheap separation costs, and good quality product output. The focus of this review is on current developments in pervaporation, mass transport in membranes, material selection, fabrication and characterization techniques, and applications of various membranes in the separation of chemicals from water.

Recent Advances of Pervaporation Separation in DMF/H2O Solutions: A Review

N,N-dimethylformamide (DMF) is a commonly-used solvent in industry and pharmaceutics for extracting acetylene and fabricating polyacrylonitrile fibers. It is also a starting material for a variety of intermediates such as esters, pyrimidines or chlordimeforms. However, after being used, DMF can be form 5–25% spent liquors (mass fraction) that are difficult to recycle with distillation. From the point of view of energy-efficiency and environment-friendliness, an emergent separation technology, pervaporation, is broadly applied in separation of azeotropic mixtures and organic–organic mixtures, dehydration of aqueous–organic mixtures and removal of trace volatile organic compounds from aqueous solutions. Since the advances in membrane technologies to separate N,N-dimethylformamide solutions have been rarely reviewed before, hence this review mainly discusses the research progress about various membranes in separating N,N-dimethylformamide aqueous solutions. The current state of available membranes in industry and academia, and their potential advantages, limitations and applications are also reviewed.

Ball-Bearing-Inspired Polyampholyte-Modified Microspheres as Bio-Lubricants Attenuate Osteoarthritis

Osteoarthritis, a lubrication dysfunction related disorder in joint, is characterized by articular cartilage degradation and joint capsule inflammation. Enhancing joint lubrication, combined with anti-inflammatory therapy, is considered as an effective strategy for osteoarthritis treatment. Herein, based on the ball-bearing-inspired superlubricity and the mussel-inspired adhesion, a superlubricated microsphere, i.e., poly (dopamine methacrylamide-to-sulfobetaine methacrylate)-grafted microfluidic gelatin methacrylate sphere (MGS@DMA-SBMA), is developed by fabricating a monodisperse, size-uniform microsphere using the microfluidic technology, and then a spontaneously modified microsphere with DMA-SBMA copolymer by a one-step biomimetic grafting approach. The microspheres are endowed with enhanced lubrication due to the tenacious hydration layer formed around the charged headgroups (-N⁺ (CH₃ )₂ - and -SO₃^- ) of the grafted poly sulfobetaine methacrylate (pSBMA), and simultaneously are capable of efficient drug loading and release capability due to their porous structure. Importantly, the grafting of pSBMA enables the microspheres with preferable properties (i.e., enhanced lubrication, reduced degradation, and sustained drug release) that are highly desirable for intraarticular treatment of osteoarthritis. In addition, when loaded with diclofenac sodium, the superlubricated microspheres with excellent biocompatibility can inhibit the tumor necrosis factor α (TNF-α)-induced chondrocyte degradation in vitro, and further exert a therapeutic effect toward osteoarthritis in vivo.

Surface Properties, Free Volume, and Performance for Thin-Film Composite Pervaporation Membranes Fabricated through Interfacial Polymerization Involving Different Organic Solvents

The type of organic solvents used in interfacial polymerization affects the surface property, free volume, and separation performance of the thin-film composite (TFC) polyamide membrane. In this study, TFC polyamide membrane was fabricated through interfacial polymerization between diethylenetriamine (DETA) and trimesoyl chloride (TMC). Four types of organic solvent were explored in the preparation of pervaporation membrane. These are tetralin, toluene, hexane, and isopentane. The solubility parameter distance between organic solvents and DETA follows in increasing order: tetralin (17.07 MPa1/2) < toluene (17.31 MPa1/2) < hexane (19.86 MPa1/2) < isopentane (20.43 MPa1/2). Same trend was also observed between the organic solvents and DETA. The larger the solubility parameter distance, the denser and thicker the polyamide. Consequently, field emission scanning electron microscope (FESEM) and positron annihilation spectroscopy (PAS) analysis revealed that TFCisopentane had the thickest polyamide layer. It also delivered the highest pervaporation efficiency (permeation flux = 860 ± 71 g m-2 h-1; water concentration in permeate = 99.2 ± 0.8 wt%; pervaporation separation index = 959,760) at dehydration of 90 wt% aqueous ethanol solution. Furthermore, TFCisopentane also exhibited a high separation efficiency in isopropanol and tert-butanol. Therefore, a suitable organic solvent in preparation of TFC membrane through interfacial polymerization enables high pervaporation efficiency.

Dimensional Nanofillers in Mixed Matrix Membranes for Pervaporation Separations: A Review

Pervaporation (PV) has been an intriguing membrane technology for separating liquid mixtures since its commercialization in the 1980s. The design of highly permselective materials used in this respect has made significant improvements in separation properties, such as selectivity, permeability, and long-term stability. Mixed-matrix membranes (MMMs), featuring inorganic fillers dispersed in a polymer matrix to form an organic-inorganic hybrid, have opened up a new avenue to facilely obtain high-performance PV membranes. The combination of inorganic fillers in a polymer matrix endows high flexibility in designing the required separation properties of the membranes, in which various fillers provide specific functions correlated to the separation process. This review discusses recent advances in the use of nanofillers in PV MMMs categorized by dimensions including zero-, one-, two- and three-dimensional nanomaterials. Furthermore, the impact of the nanofillers on the polymer matrix is described to provide in-depth understanding of the structure-performance relationship. Finally, the applications of nanofillers in MMMs for PV separation are summarized.

A highly hydrophilic benzenesulfonic-grafted graphene oxide-based hybrid membrane for ethanol dehydration

A new type of hybrid membrane was prepared by blending sodium alginate (SA) with benzenesulfonic-grafted graphene oxide (BS@GO), which showed higher hydrophilicity and more defects or edges than GO to create channels for the transfer of water molecules. BS@GO was synthesized by reacting aryl diazonium salts with graphene oxide (GO). The BS@GO sheets were aligned parallelly to the membrane surface and affected the interactions between the SA chains. BS@GO could improve the hydrophilicity and pervaporation properties of SA-based hybrid membranes. Also, compared to GO fillers, BS@GO fillers could supply higher water permeance to improve the pervaporation flux and separation factor. For the pervaporation of 90 wt% aqueous ethanol at 343 K, the optimum hybrid membrane with 1.5 wt% BS@GO in the SA matrix showed the maximum permeate flux of 703 ± 89 g m^-2 h^-1 (1.4 times higher than that of an SA membrane), and the highest separation factor was 5480 ± 94 (5.6 times higher than that of the SA membrane). Moreover, the hybrid membrane exhibited good stability and separation ability during long-term testing.

One-step synthesis of zwitterionic graphene oxide nanohybrid: Application to polysulfone tight ultrafiltration hollow fiber membrane

In this paper, novel zwitterionic graphene oxide (GO) nanohybrid was synthesized using monomers [2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and N,N′-methylenebis(acrylamide) (MBAAm) (GO@poly(SBMA-co-MBAAm), and incorporated into polysulfone (PSF) hollow fiber membrane for the effectual rejection of dye from the wastewater. The synthesized nanohybrid was characterized using FT-IR, PXRD, TGA, EDX, TEM and zeta potential analysis. The occurrence of nanohybrid on the membrane matrix and the elemental composition were analyzed by XPS. The as-prepared tight ultrafiltration hollow fiber membrane exhibited high rejection of reactive black 5 (RB-5, 99%) and reactive orange 16 (RO-16, 74%) at a dye concentration of 10 ppm and pure water flux (PWF) of 49.6 L/m²h. Fabricated nanocomposite membranes were also studied for their efficacy in the removal of both monovalent (NaCl) and divalent salts (Na₂SO₄). The results revealed that the membrane possesses complete permeation to NaCl with less rejection of Na₂SO₄ (<5%). In addition, the nanocomposite membrane revealed outstanding antifouling performance with the flux recovery ratio (FRR) of 73% towards bovine serum albumin (BSA). Therefore, the in-house prepared novel nanocomposite membrane is a good candidate for the effective decolorization of wastewater containing dye.

Novel Mixed Matrix Sodium Alginate-Fullerenol Membranes: Development, Characterization, and Study in Pervaporation Dehydration of Isopropanol

Novel mixed matrix dense and supported membranes based on biopolymer sodium alginate (SA) modified by fullerenol were developed. Two kinds of SA–fullerenol membranes were investigated: untreated and cross-linked by immersing the dry membranes in 1.25 wt % calcium chloride (CaCl₂) in water for 10 min. The structural and physicochemical characteristics features of the SA–fullerenol composite were investigated by Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopic methods, scanning electron (SEM) and atomic force (AFM) microscopies, thermogravimetric analysis (TGA), and swelling experiments. Transport properties were evaluated in pervaporation dehydration of isopropanol in a wide concentration range. It was found that the developed supported cross-linked SA-5/PAN^CaCl2 membrane (modified by 5 wt % fullerenol) possessed the best transport properties (the highest permeation fluxes 0.64–2.9 kg/(m² h) and separation factors 26–73,326) for the pervaporation separation of the water–isopropanol mixture in the wide concentration range (12–90 wt % water) at 22 °C and is suitable for the promising application in industry.

Recent Advances in Water Treatment Using Graphene-based Materials

:

A variety of processes were reported for efficient removing of heavy metal from wastewater, including but not limited to ion exchange, reverse osmosis, membrane filtration, flotation, coagulation, chemical precipitation, solvent extraction, electrochemical treatments, evaporation, oxidation, adsorption, and biosorption. Among the aforementioned techniques, adsorption/ion exchange has been known as a most important method for removing heavy metal ions and organic pollutants due to great removal performance, simple and easy process, cost-effectiveness and the considerable choice of adsorbent materials.

:

Nanotechnology and its applications have been developed in most branches of science and technology. Extensive studies have been conducted to remove heavy metal ions from wastewater by preparation and applications of various nanomaterials. Nanomaterials offer advantages in comparison to other materials including an extremely high specific surface area, low-temperature modification, short intraparticle diffusion distance, numerous associated sorption sites, tunable surface chemistry, and pore size. In order to evaluate an adsorbent, two key parameters are: the adsorption capacity and the desorption property. The adsorption parameters including the absorbent loading, pH and temperature, concentration of heavy metal ion, ionic strength, and competition among metal ions are often studied and optimized.

:

Several reviews have been published on the application of Graphene (G), Graphene Oxide (GO) in water treatment. In this minireview, we attempted to summarize the recent research advances in water treatment and remediation process by graphene-based materials and provide intensive knowledge of the removal of pollutants in batch and flow systems. Finally, future applicability perspectives are offered to encourage more interesting developments in this promising field. This minireview does not include patent literature.

Facile synthesis of Ca2+-crosslinked sodium alginate/graphene oxide hybrids as electro- and pH-responsive drug carrier

The design of stimuli-responsive drug carrier for controlled drug release is of significant importance in pharmaceutics, medicine and biology. Here, sodium alginate (SA) was integrated with graphene oxide (GO) by using Ca²⁺ as the crosslinker. The resultant SA-Ca²⁺-GO composites were freeze-dried to produce SA-Ca²⁺-GO hybrids, which were then examined by Fourier transform infrared (FT-IR) spectrometry, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The SA-Ca²⁺-GO hybrids were used as the drug carrier of methotrexate (MTX), and electro- and pH-responsive release of MTX was successfully achieved due to the excellent conductive ability of GO and the pH-sensitive property of SA. Finally, Higuchi model was employed to investigate the release kinetics of MTX from the SA-Ca²⁺-GO hybrids, and the results indicate that the release of MTX is controlled by Fickian diffusion.

Zwitterionic Hydrogel Incorporated Graphene Oxide Nanosheets with Improved Strength and Lubricity

Graphene oxide (GO) has been evaluated as a multifunctional cross-linker or reinforcement agent in composite hydrogels. In this study, a nanocomposite hydrogel consisting of GO nanosheets and zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was synthesized in an aqueous system via chemical and physical cross-linking effects. GO nanosheets were well dispersed in the hydrogels and effectively cross-linked into the sulfobetaine methacrylate (SBMA) polymer chains through the electrostatic interactions. The PSBMA hydrogel exhibited a significant enhancement in the compressive stress (close to a 5-fold increase) and a remarkable reduction in the coefficient of friction (COF) (corresponding to a decline of 52-76%) after the embedding of GO nanosheets. These improvements indicate the existence of synergetic interaction and good compatibility between GO nanosheets and the PSBMA hydrogel matrix, which results in an intertwined network structure with higher load-bearing capacity and better lubrication properties. This study provides potential in the development of new graphene-polymer composites, which is beneficial for cartilage replacement with high mechanical properties and excellent lubrication characteristics.