Preparation of Free-Standing and Flexible Graphene/Ag Nanoparticles/Poly(pyronin Y) Hybrid Paper Electrode for Amperometric Determination of Nitrite

Enhancing electrochemical nitrite sensing with a novel nanocomposite of activated carbon/carbon cloth derived from microbial biofilm

A novel approach was employed to fabricate a biofilm-derived activated carbon (BioAc) electrode on a carbon cloth (Cc) substrate for electrochemical nitrite sensing in water samples. The biofilm/Cc electrode was developed using a bioelectrochemical reactor, featuring a three-electrode system with nutrient media and microbial sources. The resultant biofilm electrode was activated at 450 °C for 2 h to eliminate impurities and enhance porosity. Morphological analysis of the BioAc/Cc electrode revealed a surface characterized by a compact film composed of numerous carbon nanoparticles. X-ray diffraction (XRD) analysis exhibited broad, highly crystalline peaks, enhancing both the electrode surface area and conductivity. Amperometry tests on the modified BioAc/Cc electrodes demonstrated a detection limit of 0.015 μM, a sensitivity of 1946.54 μA mM-1 cm-2, and a linear range spanning 0.35-478.21 μM at neutral pH conditions. Moreover, the electrodes demonstrated good stability with a RSD of 2.25% after 60 days and high reproducibility with an RSD of 1.64%. Real-time results showed 99.2 and 100.1% recovery for tap water and drinking water, respectively, highlighting the potential for commercialization in the future. These findings suggest that the BioAc/Cc electrode holds substantial potential for precise nitrite detection in environmental and wastewater applications.

Zirconium Phosphate-Incorporated Polyaniline-Graphene Oxide Composite Modified Electrodes for Effective and Selective Detection of Nitrite

Nitrite contamination in food, water, and environmental samples poses a substantial health hazard, owing to its capacity for transformation into carcinogenic compounds. Given the profound ecological and physiological implications, precise and highly sensitive surveillance of nitrite has emerged as an imperative area of concern, addressing the substantial detrimental impact that it can have on both terrestrial and aquatic ecosystems. The novel electroactive polyaniline-graphene oxide composite, incorporating hexagonal zirconium phosphate discs (PGZrP), was systematically engineered as a foundation for an advanced electrochemical sensor, enabling precise nitrite detection in diverse aqueous and biological matrices. At a specific potential peak of +0.85 V, observed within a pH 7.0 phosphate buffer solution, the PGZrP-modified glassy carbon electrode (GCE) exhibited exceptional electrocatalytic proficiency in the sensing nitrite ions (NO2-), surpassing the performance of alternative electrode configurations, including the zirconium phosphate-modified GCE (ZrP/GCE), graphene oxide-modified GCE (GO/GCE), polyaniline-graphene oxide-modified GCE (PG/GCE), and the unmodified bare glassy carbon electrode. The constructed sensor demonstrated an impressive limit of detection at 80 nM along with a broad and linear detection range spanning from 124 nM to 40 mM. The synergistic effect created by the close contact between ZrP and PG, which resulted in a well-enhanced electrochemical sensing capability, was responsible for this exceptional activity. The developed sensor exhibited an enhanced electrochemical performance characterized by an extended operational range, a heightened detection threshold, and exceptional sensitivity. The PGZrP/GCE sensor, as fabricated, consistently demonstrated commendable operational stability, robust reproducibility, and remarkable repeatability in its capacity for nitrite detection. Furthermore, its successful application in the precise quantification of nitrite levels within environmental water samples and blood specimens showcased an impressive recovery rate, establishing it as a promising tool for diverse analytical applications. These findings indicate the promising potential of the PGZrP composite for integration into electrochemical devices designed to deliver rapid response times, heightened sensitivity, and sustained stability, thereby placing it as a potential candidate for the production of cutting-edge sensors, particularly those employed for the precise recognition of nitrite in aquatic and biological specimens.

S/N-codoped carbon nanotubes and reduced graphene oxide aerogel based supercapacitors working in a wide temperature range

Among many supercapacitor electrode materials, carbon materials are widely used due to their large specific surface area, good electrical conductivity and high economic efficiency. However, carbon-based supercapacitors face the challenges of low energy density and limited operating environment. This work reports a facile self-assembled method to prepare three-dimensional carbon nanotubes/reduced graphene oxide (CNTs/rGO) aerogel material, which was applied as both positive and negative electrodes in a symmetric superacapacitor. The fabricated supercapacitor exhibited prominent capacitive performance not only at room temperature, but also at extreme temperatures (-20 ∼ 80 °C). The specific capacitances of the symmetric supercapacitors based on CNTs/rGO at a weight ratio of 2:5 respectively reached 107.8 and 128.2 F g^-1 at 25 °C and 80 °C with KOH as the electrolyte, and 80.0 and 144.6 F g^-1 at -20 °C and 60 °C with deep eutectic solvent as the electrolyte. Notably, the capacitance retention and coulombic efficiency of the assembled supercapacitors remained almost unchanged after 20,000 cycles of charge/discharge test over a wide temperature range. The work uncovered a possibility for the development of high-performance supercapacitors flexibly operated at extreme temperatures.

Nanotechnology‐based electrochemical biosensors for monitoring breast cancer biomarkers

Breast cancer is categorized as the most widespread cancer type among women globally. On-time diagnosis can decrease the mortality rate by making the right decision in the therapy procedure. These features lead to a reduction in medication time and socioeconomic burden. The current review article provides a comprehensive assessment for breast cancer diagnosis using nanomaterials and related technologies. Growing use of the nano/biotechnology domain in terms of electrochemical nanobiosensor designing was discussed in detail. In this regard, recent advances in nanomaterial applied for amplified biosensing methodologies were assessed for breast cancer diagnosis by focusing on the advantages and disadvantages of these approaches. We also monitored designing methods, advantages, and the necessity of suitable (nano) materials from a statistical standpoint. The main objective of this review is to classify the applicable biosensors based on breast cancer biomarkers. With numerous nano-sized platforms published for breast cancer diagnosis, this review tried to collect the most suitable methodologies for detecting biomarkers and certain breast cancer cell types.

Electrocatalytic oxidation and amperometric determination of sulfasalazine using bimetal oxide nanoparticles-decorated graphene oxide composite modified glassy carbon electrode at neutral pH

Cube-shaped samarium orthovanadate (SmVO₄) nanoparticles were interconnected with a graphene oxide sheet (GOS) using a simple and eco-friendly method to generate a SmVO₄@GOS nanocomposite. SmVO₄ was characterized using various spectroscopic and microscopic techniques, which confirmed the wrapping of GOS around the SmVO₄ nanoparticles. SmVO₄@GOS was then used to modify a glassy carbon electrode (GCE), which was evaluated for its electrochemical performance toward the assay of sulfasalazine (SSZ), an antibiotic drug. Cyclic voltammetry and amperometry were both used for the assay of SSZ using the SmVO₄@GOS-modified GCE at pH 7. The modified amperometric sensor is more sensitive, with a low detection limit (2.16 nM) and wide linear range of 20 nM-667 μM (Ag/AgCl). The electrochemical oxidation of SSZ was tested with blood serum and urine samples at physiological pH with recoveries in the range 96.1-98.6%. It indicates that the modified electrochemical sensor has good sensitivity and practical applicability toward SSZ detection. In the field of non-enzymatic sensors, SmVO₄@GOS/GCE provides a highly promising performance. Therefore, the electrochemical sensors have capacity for extensive analytical applications in biomedical devices.

An amphiprotic paper-based electrode for glucose detection based on layered carbon nanotubes with silver and polystyrene particles

In this work, a flexible amphiprotic amino-bonded carbon nanotube-Ag nanoparticle/polystyrene (CNT-NH₂-Ag/PS) paper electrode was fabricated to measure glucose in human body fluids by a combination of vacuum filtration and high temperature baking. The front side of the fabricated paper electrode was hydrophobic and conductive, whereas its back side was hydrophilic and nonconductive. In the fabrication process, the coating sequence of CNT-NH₂, Ag and PS was critical to determine the performance of the resulting CNT-NH₂-Ag/PS electrode besides other parameters (e.g., amount of soluble starch, PS and Ag nanoparticles, type and amount of CNT-NH₂, and electrode sensing area). Based on a series of experimental observations, the possible mechanism of glucose detection on the paper electrode was proposed, in which glucose was more favorable to migrate to the hydrophilic back side of the paper and interact with the active species (e.g., O₂^-) on the electrode surface. The electrochemical results showed that the CNT-NH₂-Ag/PS paper electrode maintained stable electrochemical properties even after five cycles of use and 60 days of storage in air. The amphiprotic paper electrode demonstrated excellent sensing performance for glucose with a linear range of 1 μM to 1000 μM, a low detection limit of 0.2 μM, and a sensitivity of 31 333.0 μA mM^-1 cm^-2. The fabricated paper electrode was also successfully applied to detect different levels of glucose in complex human body fluids such as saliva, urine, and serum. These features make this type of paper electrode promising for glucose measurement.

Catalytic oxidation and deionization of nitrite and nitrate ions using mesoporous carbon-supported nano-flaky cobalt and nickel oxyhydroxides

The composite electrode of NiCo oxide supported by porous carbon was synthesized for nitrite oxidation and nitrate electro-sorption. The crystal structure and chemical state of the Co and Ni oxyhydroxides which were precipitated on loofah-derived activated carbon (AC) using hypochlorite were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and BET surface area. The voltammetry showed that the redox couple of Co(II)/Co(III) and Ni(II)/Ni(III) as the mediator catalytically transferred the electrons of NO₂^-/NO₃^-; the Ni site had a relatively high transfer coefficient and diffusive current, while the Co site was better in the capacitive removal of the nitrite and nitrate compounds. A batch electrolysis of nitrite ions was operated under constant anodic potential mode (0 to + 1.5 V vs. Ag/AgCl) to assess the performance of the composite electrodes. The adsorption capacity of NiCo/AC (Ni = 5% and Co = 5% on AC by weight) was 23.5 mg-N g^-1, which was twice that of AC substrate (7.5 mg-N g^-1), based on a multilayer adsorption model. The steady-state kinetics of the consecutive reaction were derived to determine the rate steps of the electrochemical oxidation of NO₂^- and adsorption of NO₃^-.

The fabrication of a flexible electrode with trace Rh based on polypyrrole for the hydrogen evolution reaction

A multi-potential step method is proposed for constructing flexible PPy/Rh film electrodes. The obtained PPy/Rh films exhibit excellent hydrogen evolution reaction (HER) catalytic performance and can be used as flexible electrodes that maintain their initial catalytic performance after bending. Characterization shows that the active sites of the catalyst are due to electron transfer between Rh and PPy.

Recent Advances in (Bio)Chemical Sensors for Food Safety and Quality Based on Silver Nanomaterials

There is a continuing need for tools and devices which can simplify, quicken and reduce the cost of analyses of food safety and quality. Chemical sensors and biosensors are increasingly being developed for this purpose, reaping from the opportunities provided by nanotechnology. Due to the distinct electrical and optical properties of silver nanoparticles (AgNPs), this material plays a vital role in (bio)sensor development. This review is an analysis of chemical sensors and biosensors based on silver nanoparticles with application in food and beverage matrices. It consists of academic research published from 2015 to 2020. The paper is structured to separately explore the designs of two major (bio)sensor classes: electrochemical (including voltammetric and impedimetric sensors) and optical sensors (including colourimetric and luminescent), with special focus on the type of silver nanomaterial and its role in the sensor system. The review indicates that diverse nanosensors have been developed, capable of detecting analytes such as pesticides, mycotoxins, fertilisers, microorganisms, heavy metals, and various additives with exceptional analytical performance. Current trends in the design of such sensors are highlighted and challenges which need to be overcome in the future are discussed.

Free-standing electrochemical biosensor for carcinoembryonic antigen detection based on highly stable and flexible conducting polypyrrole nanocomposite

A flexible free-standing electrochemical biosensor to detect carcinoembryonic antigen (CEA) is described based on a conducting polypyrrole (PPy) nanocomposite film electrode. The conducting PPy composite was constructed by the sandwiched structure formed by PPy doped with pentaerythritol ethoxylate (PEE) and 2-naphthalene sulfonate (2-NS-PPy) separately via electropolymerization. Gold nanoparticles (AuNPs) were fixed on the PPy composite film by electrodeposition and then connected to CEA aptamer through self-assembly to construct a free-standing electrochemical biosensor breaking away from additional soft substrates and current collector. This PPy composite film-based electrochemical biosensor exhibits satisfying sensing performance for CEA detection, with a linear range from 10^-10 g/mL to 10^-6 g/mL and a detection limit of 0.033 ng/mL, good specificity and long-term sensing stability (96.8% of the original signal after 15 days). The biosensor also presents acceptable reproducibility with 1.7% relative standard deviation. Moreover, this electrochemical biosensor owns the deformation stability that could bear various deformations (twisting, folding, and knotting) without affecting device's sensing performance. It can even maintain 99.4% of the original signal under 25% strain deformation. Due to the superior sensing performance, high stability (mechanical deformation and long-term storage), and flexibility, this free-standing electrochemical biosensor proves huge potential in application of flexible and wearable electronics.

Flexible electrochemical biosensors for healthcare monitoring

As the interest in wearable devices has increased recently, increasing biosensor flexibility has begun to attract considerable attention. Among the various types of biosensors, electrochemical biosensors are uniquely suited for the development of such flexible biosensors due to their many advantages, including their fast response, inherent miniaturization, convenient operation, and portability. Therefore, many studies on flexible electrochemical biosensors have been conducted in recent years to achieve non-invasive and real-time monitoring of body fluids such as tears, sweat, and saliva. To achieve this, various substrates, novel nanomaterials, and detection techniques have been utilized to develop conductive flexible platforms that can be applied to create flexible electrochemical biosensors. In this review, we discussed recently reported flexible electrochemical biosensors and divided them into specific categories including materials for flexible substrate, fabrication techniques for flexible biosensor development, and recently developed flexible electrochemical biosensors to externally monitor target molecules, thereby providing a means to noninvasively examine cells and body fluid samples. In conclusion, this review will discuss the materials, methods, recent studies, and perspectives on flexible electrochemical biosensors for healthcare monitoring and wearable biosensing systems.

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.

Electropolymerized melamine for simultaneous determination of nitrite and tartrazine

Poly(melamine) (PMel) was synthesized via the electropolymerization of melamine monomer, which was then characterized by field-emission scanning electron microscopy (FESEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The possible polymerization mechanisms of melamine were also revealed by FT-IR spectroscopy and UV-Vis spectroscopy. Next, the PMel modified GCE (PMel/GCE) was used for the simultaneous determination of nitrite (NO₂^-) and tartrazine, and the parameters were optimized. The kinetic study showed that the electrochemical oxidation of nitrite and tartrazine at the surface of PMel/GCE is a typical surface-controlled electrode process. Under the optimun conditions, the developed sensor outperformed those previously reported, and it also exhibited high selectivity and reproducibility. Finally, the PMel/GCE was used for the simultaneous determination of nitrite and tartrazine in foodstuffs, and the results indicated that the proposed sensor could be a promising candidate for accurate determination of nitrite and tartrazine in real food samples.

Noble metal alloy nanoparticles coated flexible MoS2 paper for the determination of reactive oxygen species

The monitoring of reactive oxygen species (ROS) in biological system has been occupying research hotspots recently, since the biochemical alterations caused by the overproduction of ROS are the main incentives of diseases and accelerated aging process. In this work, we proposed an effective and simple strategy for the construction of high-performance ROS electrochemical sensor. Noble metal alloy nanoparticles (AuPt nanoparticles) with high catalytic activity were spontaneously coated on the freestanding metallic molybdenum disulfide (MoS₂) paper independent of any auxiliary conditions. Results have found that the abundant defects and electrons distributed on the metallic MoS₂ paper could provide active sites for the nucleation and growth of noble metal nanoparticles. Besides, the excellent mechanical properties of the MoS₂ paper promote the formation of flexible sensors. The fabricated MoS₂ paper-based sensor was demonstrated to detect ROS with the advantages of wide linear range, prominent selectivity and flexibility, satisfactory detection stability, as well as simple and convenient preparation process. Furthermore, the desirable results obtained in the real sample experiments operated in plant extract pave the way for further real-time monitoring of plant physiological status to provide valuable information for guidance during plant growth.

Gold nanoparticles decorated bimetallic CuNi-based hollow nanoarchitecture for the enhancement of electrochemical sensing performance of nitrite

Gold nanoparticles (AuNPs) decorated bimetallic CuNi-based hollow nanoarchitecture (CNHN) are reported for the first time as a nonenzymatic sensor for the quantification of nitrite in neutral solution . The CNHN was prepared via a convenient calcining routine using the bimetallic CuNi-MOFs as a coprecursor. The unique chemical structure of hollow CNHN with high specific surface area and abundant terminal amino groups effectively avoid the aggregation of AuNPs and facilitate the subsequent adsorption of nitrite. The Au/CNHN exhibited high electrocatalytic activity towards nitrite oxidation due to the synergetic catalytic effect of AuNPs and CNHN. Chronoamperometric detection of nitrite at the Au/CNHN/GCE achieved a lower linear calibration range of 0.05 to 1.15 mM, with an LOD of 0.017 μM compared with previous reports. The proposed method obtained satisfactory recoveries for nitrite determination in practical applications, which was verified by UV-Vis spectrophotometry. The prepared sensor based on Au/CNHN featured favorable selectivity and stability, which provides a promising approach for real sample analysis. Graphical abstract.

Hierarchical Porous RGO/PEDOT/PANI Hybrid for Planar/Linear Supercapacitor with Outstanding Flexibility and Stability

Many hybrid electrodes for supercapacitors (SCs) are a reckless combination without proper structural design that keeps them from fulfilling their potential. Herein, we design a reduced graphene oxide/poly(3,4-ethylenedioxythiophene)/polyaniline (RGO/PEDOT/PANI) hybrid with hierarchical and porous structure for high-performance SCs, where components fully harness their advantages, forming an interconnected and conductive framework with substantial reactive sites.Thus, this hybrid achieves a high capacitance of 535 F g-1 along with good rate capability and cyclability. The planar SC based on this hybrid deliver an energy density of 26.89 Wh kg-1 at a power density of 800 W kg-1. The linear SC developed via modifying a cotton yarn with the hybrid exhibits good flexibility and structural stability, which operates normally after arbitrary deformations. This work provides a beneficial reference for developing SCs.

Application of Graphene-Based Materials for Detection of Nitrate and Nitrite in Water-A Review

Nitrite and nitrate are widely found in various water environments but the potential toxicity of nitrite and nitrate poses a great threat to human health. Recently, many methods have been developed to detect nitrate and nitrite in water. One of them is to use graphene-based materials. Graphene is a two-dimensional carbon nano-material with sp² hybrid orbital, which has a large surface area and excellent conductivity and electron transfer ability. It is widely used for modifying electrodes for electrochemical sensors. Graphene based electrochemical sensors have the advantages of being low cost, effective and efficient for nitrite and nitrate detection. This paper reviews the application of graphene-based nanomaterials for electrochemical detection of nitrate and nitrite in water. The properties and advantages of the electrodes were modified by graphene, graphene oxide and reduced graphene oxide nanocomposite in the development of nitrite sensors are discussed in detail. Based on the review, the paper summarizes the working conditions and performance of different sensors, including working potential, pH, detection range, detection limit, sensitivity, reproducibility, repeatability and long-term stability. Furthermore, the challenges and suggestions for future research on the application of graphene-based nanocomposite electrochemical sensors for nitrite detection are also highlighted.

Surface Engineering of Carbon Fiber Paper toward Exceptionally High-Performance and Stable Electrochemical Nitrite Sensing

In this work, we introduce our recent finding that the carbon fiber paper (CFP) treated by simple air annealing (OCFP) could be used for exceptionally high-performance electrochemical nitrite sensing. The air-annealing process endows the pristine CFP with higher defective edge/plane sites, more oxygen-containing functional groups, higher roughness, and improved wettability. The electrochemical studies show that the OCFP exhibits excellent sensing performance for nitrite, with an ultralow determination limit of 0.1 μM and a detection limit of 0.07 μM, an ultrawide linear determination range of 0.1-3838.5 μM, a fast current response of 1 s, and a high sensitivity of 930.4 μA mM^-1 cm^-2. These performance values are comparable or even superior to those for most reported noble- or transition-metal-based advanced nitrite sensors. Besides, this electrode also presents satisfactory stability, reproducibility, and feasibility of nitrite sensing in food samples. As an ideal monolithic and metal-free catalyst with ultrahigh and stable detection performance, the OCFP has a high potential to be integrated into next-generation electrochemical sensing devices.

A black phosphorus based synergistic antibacterial platform against drug resistant bacteria

In the fight against pathogenic bacteria, traditional antibiotic therapy is challenged by low efficiency and drug resistance. These drawbacks motivate the development of synergistic antibacterial therapy, but there is a lack of efficient synergistic platforms. Herein, with methicillin-resistant Staphylococcus aureus (MRSA) as a pathogenic bacterial model, we explored the potential of black phosphorus (BP) as a synergistic therapeutic platform for drug resistant bacterial infection. Acting as a substrate, reductant and stabilizer, BP nanosheets were decorated with Ag nanoparticles (NP) through an in situ growth strategy. The photothermal effect of the BP nanosheets allows Ag@BP nanohybrids to rapidly disrupt a bacterial membrane under near infrared (NIR) light irradiation. Moreover, the slowly released Ag⁺ elevates oxidative stress and sustainably suppresses bacterial proliferation for a long time. The combination of these two aspects endows the Ag@BP nanohybrids with synergistically enhanced antibacterial performance. Different from traditional antibiotics, the antibacterial effects of the Ag@BP nanohybrids are independent of the bacterial structure, which bypasses the issue of drug resistance. The in vivo studies show that the Ag@BP nanohybrids efficiently decrease the MRSA bacterial burden in mice and minimize infection associated tissue lesions. Besides, the excellent biocompatibility of the Ag@BP nanohybrids guarantees their biosafety for future clinical applications. Accordingly, this work demonstrates the potential of the BP nanosheets in the synergistic antibacterial therapy against drug resistant bacteria, and paves the way for developing 2D semiconductor based synergistic antibacterial nanodrugs.

A new electrochemical sensor for highly sensitive and selective detection of nitrite in food samples based on sonochemical synthesized Calcium Ferrite (CaFe2O4) clusters modified screen printed carbon electrode

Herein, we report a novel, disposable electrochemical sensor for the detection of nitrite ions in food samples based on the sonochemical synthesized orthorhombic CaFe₂O₄ (CFO) clusters modified screen printed electrode. As synthesized CFO clusters were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transformer infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and amperometry (i-t). Under optimal condition, the CFO modified electrode displayed a rapid current response to nitrite, a linear response range from 0.016 to 1921 µM associated with a low detection limit 6.6 nM. The suggested sensor also showed the excellent sensitivity of 3.712 μA μM^-1 cm^-2. Furthermore, a good reproducibility, long-term stability and excellent selectivity were also attained on the proposed sensor. In addition, the practical applicability of the sensor was investigated via meat samples, tap water and drinking water, and showed desirable recovery rate, representing its possibilities for practical application.

Determination of nitrite ions in environment analysis with a paper-based microfluidic device

A new microfluidic paper-based analytical device, a (Ag-μPAD)-based chemiresistor composed of silver ink, has been developed for the selective, sensitive, and quantitative determination of nitrite ions in environmental analysis.

Skeleton/skin structured (RGO/CNTs)@PANI composite fiber electrodes with excellent mechanical and electrochemical performance for all-solid-state symmetric supercapacitors

Polyaniline coated reduced graphene oxide/carbon nanotube composite fibers ((RGO/CNTs)@PANI, RCP) with skeleton/skin structure are designed as fiber-shaped electrodes for high performance all-solid-state symmetric supercapacitor. The one-dimensional reduced graphene oxide/carbon nanotube composite fibers (RGO/CNTs, RC) are prepared via a simple in-situ reduction of graphene oxide in presence of carbon nanotubes in quartz glass pipes, which exhibit excellent mechanical performance of >193.4 MPa of tensile strength. Then polyaniline is coated onto the RC fibers by electrodepositing technique. The electrochemical properties of the RCP fiber-shaped electrodes are optimized by adjusting the feeding ratio of carbon nanotubes. The optimized one exhibits good electrochemical characteristic such as highest volumetric specific capacitance of 193.1 F cm^-3 at 1 A cm^-3, as well as excellent cyclic retention of 92.60% after 2000 cyclic voltammetry cycles. Furthermore, the all-solid-state symmetric supercapacitor, fabricated by using the final composite fiber as both positive and negative electrodes pre-coated with the poly(vinyl alcohol)/H₂SO₄ gel polyelectrolyte, possesses volumetric capacitance of 36.7 F cm^-3 at 0.2 A cm^-3 and could light up a red light-emitting diode easily. The excellent mechanical and electrochemical performances make the designed supercapacitor as promising high performance wearable energy storage device.

An Overview of the Development of Flexible Sensors

Flexible sensors that efficiently detect various stimuli relevant to specific environmental or biological species have been extensively studied due to their great potential for the Internet of Things and wearable electronics applications. The application of flexible and stretchable electronics to device-engineering technologies has enabled the fabrication of slender, lightweight, stretchable, and foldable sensors. Here, recent studies on flexible sensors for biological analytes, ions, light, and pH are outlined. In addition, contemporary studies on device structure, materials, and fabrication methods for flexible sensors are discussed, and a market overview is provided. The conclusion presents challenges and perspectives in this field.