In Situ Synthesis and Characterization of Ge Embedded Electrospun Carbon Nanostructures as High Performance Anode Material for Lithium-Ion Batteries

Electrospun Nanofiber Electrodes for Lithium-Ion Batteries

Electrospun nanofiber materials have the advantages of good continuity, large specific surface areas, and high structural tunability, which provide many desirable characteristics for lithium-ion battery electrodes. Here, the principles and advantages of electrospinning technology are first elaborated, then the previous studies on high-performance nanofibrous electrode materials prepared by electrospinning technology are comprehensively summarized, and the correlation between 1D nanostructured materials and electrode performances is discussed. Finally, the remaining challenges of nanofibrous electrodes are proposed and some future study directions of this particular area are pointed out. This review provides new enlightenment for the design of nanofibrous electrodes toward high-performance lithium-ion batteries.

Facile synthesis of Si/Ge/graphite@C composite with improved tap density and electrochemical performance

Nanoengineering is one of the most effective methods to promote the lithium storage performance of silicon material, which suffers from huge volume changes and poor reaction kinetics during cycling. However, the commercial application of nanostructured silicon is hindered by its high manufacturing cost and low tap density. Herein, a Si/Ge/graphite@C composite was successfully synthesized by ball-milling with subsequent calcination. By introducing Ge, graphite and an amorphous carbon coating, both tap density and electrochemical performance are improved significantly. Benefiting from the synergetic effects of the above components, the Si/Ge/graphite@C composite delivers a reversibility capacity of 474 mA h g-1 at 0.2 A g-1 and stable capacity retention.

Dual carbon decorated germanium-carbon composite as a stable anode for sodium/potassium-ion batteries

In the present work, we introduce a dual carbon accommodated structure in which germanium nanoparticles are encapsulated into an ordered mesoporous carbon matrix (Ge-CMK) and further coated with an amorphous carbon layer (Ge@C-CMK) through a nano-casting route followed by chemical vapor deposition (CVD) treatment. In the resultant Ge@C-CMK composite, the unique lane-like pore structure that cooperates with the amorphous carbon surface can not only mitigate the volume expansion of germanium particles, but also improve the electrical conductivity of germanium as well as facilitate Na⁺/K⁺ diffusion. When employed as the anode of sodium-ion batteries, the Ge@C-CMK electrode exhibits stable capacity as well as long-term cycling stability (a stable capacity of 176 mAh g^-1 at 1 A g^-1 after 5000 cycles). Furthermore, it also delivers a reversible capacity when used as the anode of potassium-ion batteries. This demonstrates that the Ge@C-CMK electrode possesses promising application potential as an alternative anode in sodium and potassium ion storage applications.

Germanium-based high-performance dual-ion batteries

Recently, dual-ion batteries (DIBs) have received immense attention owing to their high operating voltage and low cost, and further studies on the enhancement of their energy densities and cyclabilities are being intensively pursued. Herein, a novel Ge-based DIB has been developed for the first time by using a rationally designed nanocomposite of Ge particles embedded in one-dimensional carbon nanofibers (Ge/CNFs) as an anode. The resulting battery shows a high discharge capacity of 281 mA h g^-1 at a discharge current of 0.25 A g^-1 and a superb rate capability of 94 mA h g^-1 at a discharge current of 2.5 A g^-1, which greatly surpasses those of most of the reported DIBs. These remarkable properties can be ascribed to the fact that the uniform one-dimensional nanostructure facilitates the improvement of lithium-ion diffusion within the hybrids, and the carbon matrix effectively alleviates the volume expansion of Ge during the cycling process and simultaneously enhances the electrical conductivity of the hybrids. The charge storage mechanism of Ge/CNFs is found to be Ge alloying with Li, accompanied by a phase transformation process from crystalline Ge to amorphous Li_xGe alloys. This work paves the way for the rational utilization of Ge-based materials in new-generation high-performance DIBs.

Hierarchical N-doping germanium/carbon nanofibers as anode for high-performance lithium-ion and sodium-ion batteries

Germanium (Ge) has gained a great deal of attention as an anode material for sodium ion batteries (SIBs) and lithium ion batteries (LIBs) for its high theoretical capacity and ion diffusivity. Unfortunately, Ge particle pulverization triggered by huge volume expansion during the alloying and dealloying processes can cause rapid capacity fade. Herein we report a facile method for the preparation of ultrafine Ge nanoparticles embedded in hierarchical N-doped multichannel carbon fibers (denoted as Ge-NMCFs) by electrospinning. The hierarchical carbon matrix not only provides sufficient internal void space to accommodate the large volume expansion of Ge nanoparticles, but also provides numerous open channels for the easy access of electrolyte and Na/Li ions. As half-cell tests revealed, the composite provides discharge capacity of 303 mA h g^-1 (1st cycle) and 160 mA h g^-1 (700th cycle) for SIBs, 1146.7 mA h g^-1 (1st cycle) and 600 mA h g^-1 (500th cycle) for LIBs at a current density of 500 mA g^-1 (all the presented capacity based on the total weight of Ge/C composites). Density functional theory calculation suggests that N-doped in carbon can enhance the Na/Li ion storage and improve the electrochemical performance. This demonstration is an important step towards the development of SIBs and LIBs with much higher specific energy capacity and longer cycle stability.

Graphene reinforced carbon nanofiber engineering enhances Li storage performances of germanium oxide

The rational design of electrode materials with high power and energy densities, good operational safety, and long cycle life remains a great challenge for developing advanced battery systems. As a promising electrode material for rechargeable batteries, germanium oxide (GeO₂) shows high capacity, but suffers from rapid capacity fading caused by its large volume variation during charge/discharge processes and poor rate performance owing to low intrinsic electronic conductivity. In this study, a novel one-dimensional (1D) carbon/graphene-nanocable–GeO₂ nanocomposite (denoted as GeO₂/nanocable) is rationally designed and prepared via a facile electrospinning method. Specifically, amorphous carbon and graphene spontaneously construct a nanocable structure, in which graphene acts as the “core” and amorphous carbon as the “shell”, and GeO₂ nanoparticles are encapsulated in the nanocable. The graphene “core” promises good electrical conductivity while the amorphous carbon “shell” guarantees fast Li ions diffusion. When tested as an anode material for rechargeable lithium ion batteries, the GeO₂/nanocable exhibits remarkable Li storage performance, including high reversible capacity (900 mA h g⁻¹), high capacity retention (91% after 100 cycles), and good rate performance (595 mA h g⁻¹ at 5000 mA g⁻¹).

In the GeO₂/nanocable, amorphous carbon and graphene spontaneously construct a nanocable structure, graphene “core” promises the good electrical conductivity while the amorphous carbon “shell” guarantees the fast Li ions diffusion.

Atomic-scale combination of germanium-zinc nanofibers for structural and electrochemical evolution

Alloys are recently receiving considerable attention in the community of rechargeable batteries as possible alternatives to carbonaceous negative electrodes; however, challenges remain for the practical utilization of these materials. Herein, we report the synthesis of germanium-zinc alloy nanofibers through electrospinning and a subsequent calcination step. Evidenced by in situ transmission electron microscopy and electrochemical impedance spectroscopy characterizations, this one-dimensional design possesses unique structures. Both germanium and zinc atoms are homogenously distributed allowing for outstanding electronic conductivity and high available capacity for lithium storage. The as-prepared materials present high rate capability (capacity of ~ 50% at 20 C compared to that at 0.2 C-rate) and cycle retention (73% at 3.0 C-rate) with a retaining capacity of 546 mAh g⁻¹ even after 1000 cycles. When assembled in a full cell, high energy density can be maintained during 400 cycles, which indicates that the current material has the potential to be used in a large-scale energy storage system.

Alloy anode materials are receiving renewed interest. Here the authors show the design of Ge-Zn nanofibers for lithium ion batteries. Featured by a homogeneous composition at the atomic level and other favorable structural attributes, the materials allow for impressive electrochemical performance.

A Facile Synthesis of MoS2/g-C3N4 Composite as an Anode Material with Improved Lithium Storage Capacity

The demand for well-designed nanostructured composites with enhanced electrochemical performance for lithium-ion batteries electrode materials has been emerging. In order to improve the electrochemical performance of MoS2-based anode materials, MoS2 nanosheets integrated with g-C3N4 (MoS2/g-C3N4 composite) was synthesized by a facile heating treatment from the precursors of thiourea and sodium molybdate at 550 °C under N2 gas flow. The structure and composition of MoS2/g-C3N4 were confirmed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis and elemental analysis. The lithium storage capability of the MoS2/g-C3N4 composite was evaluated, indicating high capacity and stable cycling performance at 1 C (A·g-1) with a reversible capacity of 1204 mA·h·g-1 for 200 cycles. This result is believed the role of g-C3N4 as a supporting material to accommodate the volume change and improve charge transport for nanostructured MoS2. Additionally, the contribution of the pseudocapacitive effect was also calculated to further clarify the enhancement in Li-ion storage performance of the composite.

Electrospun Nanomaterials for Energy Applications: Recent Advances

Electrospinning is a simple, versatile, cost-effective, and scalable technique for the growth of highly porous nanofibers. These nanostructures, featured by high aspect ratio, may exhibit a large variety of different sizes, morphologies, composition, and physicochemical properties. By proper post-spinning heat treatment(s), self-standing fibrous mats can also be produced. Large surface area and high porosity make electrospun nanomaterials (both fibers and three-dimensional fiber networks) particularly suitable to numerous energy-related applications. Relevant results and recent advances achieved by their use in rechargeable lithium- and sodium-ion batteries, redox flow batteries, metal-air batteries, supercapacitors, reactors for water desalination via capacitive deionization and for hydrogen production by water splitting, as well as nanogenerators for energy harvesting, and textiles for energy saving will be presented and the future prospects for the large-scale application of electrospun nanomaterials will be discussed.

Unusual Capacity Increases with Cycling for Ladder-Type Microporous Polymers

Microporous polymers using triptycene vertices and various ladder-type benzimidazole linkers are synthesized and tested as lithium-ion battery anodes. An unusual increase in performance is observed upon cycling, affording high capacities of 783 and 737 mAh g^-1 for a perylene derivative and the pyromellitic derivative after 1000 cycles. The high performance of these materials after cycling is attributed to favorable electrode morphology and high crystallinity for perylene derivative, and the presence of charge carriers for pyromellitic derivative. By studying the effect of various linkers on the electrochemical performance, structure-property relationships are proposed that can be used to guide the development of high-performance materials for lithium-ion batteries.

Hierarchical Graphene-Scaffolded Silicon/Graphite Composites as High Performance Anodes for Lithium-Ion Batteries

To better couple with commercial cathodes, such as LiCoO₂ and LiFePO₄ , graphite-based composites containing a small proportion of silicon are recognized as promising anodes for practical application in lithium-ion batteries (LIBs). However, the prepared Si/C composite still suffers from either rapid capacity fading or the high cost up to now. Here, the facile preparation of hierarchical graphene-scaffolded silicon/graphite composite is reported. In this designed 3D structure, Si nanoparticles are homogeneously dispersed on commercial graphites and then uniformly encapsulated in the hierarchical graphene scaffold. This hierarchical structure is also well characterized by the synchrotron X-ray computed nanotomography technique. When evaluated as anodes for LIBs, the hierarchical composite, with the Si weight ratio of 5 wt%, exhibits a reversible capacity of 559 mA h g^-1 at 75 mA g^-1 , suggesting an unprecedented utilization of Si up to 95%. Even at 372 mA g^-1 , the composite can still maintain a high capacity retention of 90% after 100 cycles. Coupled with the LiFePO₄ cathode, the full cell shows the high capacity of 114 mA h g^-1 at 170 mA g^-1 . The excellent Li-storage properties can be ascribed to the unique designed hierarchical structure.

Improved Ionic Diffusion through the Mesoporous Carbon Skin on Silicon Nanoparticles Embedded in Carbon for Ultrafast Lithium Storage

Because of their combined effects of outstanding mechanical stability, high electrical conductivity, and high theoretical capacity, silicon (Si) nanoparticles embedded in carbon are a promising candidate as electrode material for practical utilization in Li-ion batteries (LIBs) to replace the conventional graphite. However, because of the poor ionic diffusion of electrode materials, the low-grade ultrafast cycling performance at high current densities remains a considerable challenge. In the present study, seeking to improve the ionic diffusion, we propose a novel design of mesoporous carbon skin on the Si nanoparticles embedded in carbon by hydrothermal reaction, poly(methyl methacrylate) coating process, and carbonization. The resultant electrode offers a high specific discharge capacity with excellent cycling stability (1140 mA h g^-1 at 100 mA g^-1 after 100 cycles), superb high-rate performance (969 mA h g^-1 at 2000 mA g^-1), and outstanding ultrafast cycling stability (532 mA h g^-1 at 2000 mA g^-1 after 500 cycles). The battery performances are surpassing the previously reported results for carbon and Si composite-based electrodes on LIBs. Therefore, this novel approach provides multiple benefits in terms of the effective accommodation of large volume expansions of the Si nanoparticles, a shorter Li-ion diffusion pathway, and stable electrochemical conditions from a faster ionic diffusion during cycling.

A heart-coronary arteries structure of carbon nanofibers/graphene/silicon composite anode for high performance lithium ion batteries

In an animal body, coronary arteries cover around the whole heart and supply the necessary oxygen and nutrition so that the heart muscle can survive as well as can pump blood in and out very efficiently. Inspired by this, we have designed a novel heart-coronary arteries structured electrode by electrospinning carbon nanofibers to cover active anode graphene/silicon particles. Electrospun high conductive nanofibers serve as veins and arteries to enhance the electron transportation and improve the electrochemical properties of the active "heart" particles. This flexible binder free carbon nanofibers/graphene/silicon electrode consists of millions of heart-coronary arteries cells. Besides, in the graphene/silicon "hearts", graphene network improves the electrical conductivity of silicon nanopaticles, buffers the volume change of silicon, and prevents them from directly contacting with electrolyte. As expected, this novel composite electrode demonstrates excellent lithium storage performance with a 86.5% capacity retention after 200 cycles, along with a high rate performance with a 543 mAh g^-1 capacity at the rate of 1000 mA g^-1.

Amorphous Ge/C Composite Sponges: Synthesis and Application in a High-Rate Anode for Lithium Ion Batteries

A Ge/C spongelike composite is prepared by the facile and scalable single-step pyrolysis of the GeO_x/ethylenediamine gel process, which has a feature with three-dimensional interconnected pore structures and is hybridized with nitrogen-doped carbon. A detailed investigation shows that the pore in the sponge is formed for the departure of the gaseous products at the evaluated temperature. As an anode for lithium ion batteries, the obtained composite exhibits superior specific capacity in excess of 1016 mA h g^-1 at 100 mA g^-1 after 100 cycles. Moreover, the amorphous Ge/C sponge electrode also has a good rate capacity and stable cycling performance. The obtained amorphous Ge/C sponges are a good candidate anode for next-generation lithium ion batteries.

Green synthesis of GeO2/graphene composites as anode material for lithium-ion batteries with high capacity

A facile green solution route using only GeO₂ powder, graphene oxide and purified water has been developed to prepare a GeO₂/graphene composite, in which the GeO₂ particles are wrapped in graphene nanosheets.