Sea Cucumber-Inspired Autolytic Hydrogels Exhibiting Tunable High Mechanical Performances, Repairability, and Reusability

Gradient Solvent Replacement-Mediated Formation of High-Strength Hydrogel-Forming Microneedle for Long-Term Drug Delivery

The microneedle, a minimally invasive transdermal system, provides a convenient and painless method for drug delivery. Among the various types of microneedles, hydrogel-forming microneedles (HFMs) demonstrate distinct advantages in terms of high-dose drug loading and biocompatibility. However, HFMs usually require drying to obtain sufficient puncture strength, which may destroy drug activity and increase storage costs. Herein, a high-strength HFM patch with pH-responsiveness for post-drug loading and long-term release is developed based on acrylonitrile-acrylic acid copolymer. The dipole-dipole and hydrogen bonding interactions formed through gradient solvent replacement are evenly distributed within the cross-linked network, significantly enhancing the mechanical properties of the hydrogel required for epidermal penetration. The prepared hydrogel exhibits a tensile strength of 26 MPa and a Young's modulus of 407 MPa. The microneedles formed from this hydrogel display a single needle mechanical force of 1.18 N. The post-loading mode conferred by pH responsiveness allows the drug to be encapsulated in both the tips and the substrate, acting as a reservoir. Once applied to the skin, the microneedle is activated by body fluids to achieve long-term drug release. Overall, this high-strength HFM improves the mechanical properties in the hydrated state, making it a promising minimally invasive transdermal delivery platform.

Mantis shrimp-inspired functionalized plant fibers to fabricate a soy protein adhesive with high strength and mildew resistance

Soy protein-based adhesives present a promising alternative to petroleum-based adhesives in the wood industry. Nevertheless, their limitations, including insufficient water resistance, low bonding strength, and inadequate mold resistance, constrain their industrial applications. Plant fiber-reinforced composites find extensive applications across various sectors, including furniture, automotive, and aerospace. However, the smooth surfaces of the fibers adversely impact the reinforcement effect. Inspired by the multilayered microscale structure of peacock mantis shrimp chelipeds, this work presents an eco-friendly method to develop hierarchical functionalized kenaf fibers (KF) for reinforcing soybean meal (SM) adhesive. Specifically, ZnO was deposited onto the KF surface to impart micro-nano roughness, thereby enhancing their mechanical interlocking effect with the SM matrix. Bio-based lipoic acid (LA) and limonene (LIM) were employed to create a highly reactive layer on the fiber surface, facilitating the formation of multiple chemical crosslinking structures with the SM matrix. The synergistic mechanical and chemical effects between KF and SM endowed adhesive with improved performance. The wet shear strength of the three-layer plywood prepared with the synthetic adhesive was remarkably increased by 450 % to 1.21 MPa. Additionally, the combined anti-mold effects of ZnO, LA, LIM, and triglyceride amine (TGA) extend the adhesive's storage time to 7 days. This sustainable and eco-friendly design of multilayered bionically functionalized KF offers an efficient approach for the high-value utilization of agroforestry residues, presenting broad application prospects in SM-based adhesives.

Microstructure of Sea Cucumber Parastichopus tremulus Peptide Hydrogels and Bioactivity in Caco-2 Cell Culture Model

Wider availability of marine proteins for the development of food and biomedical applications has a high importance. Sea cucumber body wall proteins have specific functional properties that could be very promising for such product development. However, protein extraction from whole animals is costly and complex, whereas peptide hydrogel production using biotechnological methods can be considered an economically viable approach. Body-wall derived peptides from sea cucumber Parastichopus tremulus have been suggested as a nontraditional source of potentially edible hydrocolloids. In the current work, four peptides were produced through custom synthesis. Scanning electron microscopy (SEM) of the combined mix of the four peptides (1:1 ratio; 15 mM concentration) in a calcium ion-containing buffer confirmed untargeted self-assembly with long, thick fibrillar formations at a microscale (measured mean cross-section 2.78 µm and length sizes of 26.95 µm). The antioxidant activity of the peptides separately, and in combination (1:1 molar ratio), was studied in vitro through ORAC (values in the range from 279 to 543 µmol TE/g peptide), ABTS (from 80.4 to 1215 µmol TE/g peptide), and DPPH (from 5.2 to 19.9 µmol TE/g) assays, and confirmed for protection against oxidation in a Caco-2 cell culture model. Angiotensin-I converting enzyme inhibitory activity was also confirmed for two of the four peptides, with the highest IC 50 of 7.11 ± 0.84 mg/mL.

Tough and elastic hydrogels based on robust hydrophobicity-assisted metal ion coordination for flexible wearable devices

Flexible wearable sensors that combine excellent flexibility, high elasticity, sensing capabilities, and outstanding biocompatibility are gaining increasing attention. In this study, we successfully develop a robust and elastic hydrogel-based flexible wearable sensor by modulating molecular structures combined with metal ion coordination. We leverage three N-acryloyl amino acid monomers, including N-acryloyl glycine (AG), N-acryloyl alanine (AA), and N-acryloyl valine (AV) with different hydrophobic groups adjacent to the carboxyl group, to copolymerize with acrylamide (AM) in the presence of Zr4+ for hydrogel preparation in one step (P(AM3-AG/AA/AV0.06)-Zr0.034+ hydrogels). Our investigation reveals that the P(AM3-AV0.06)-Zr0.034+ hydrogel with the most hydrophobic side group demonstrates superior mechanical properties (1.1 MPa tensile stress, 3566 kJ m-3 toughness and 1.3 kJ m-2 fracture energy) and resilience to multiple tensile (30% strain, 500 cycles) and compression cycling (50% strain, 500 cycles). Moreover, the P(AM3-AV0.06)-Zr0.034+ hydrogel exhibits good biocompatibility and high conductivity (1.1 S m-1) and responsivity (GF = 16.21), and is proved to be suitable as a flexible wearable sensor for comprehensive human activity monitoring.

Localized delivery of metformin via 3D printed GelMA-Nanoclay hydrogel scaffold for enhanced treatment of diabetic bone defects

Background

Diabetic bone defects present significant challenges for individuals with diabetes. While metformin has been explored for bone regeneration via local delivery, its application in treating diabetic bone defects remains under-explored. In this study, we aim to leverage 3D printing technology to fabricate a GelMA-Nanoclay hydrogel scaffold loaded with metformin specifically for this purpose. The objective is to assess whether the in situ release of metformin can effectively enhance osteogenesis, angiogenesis, and immunomodulation in the context of diabetic bone defects.

Materials and methods

Utilizing 3D printing technology, we constructed a GelMA-Nanoclay-Metformin hydrogel scaffold with optimal physical properties and biocompatibility. The osteogenic, angiogenic, and immunomodulatory characteristics of the hydrogel scaffold were thoroughly investigated through both in vitro and in vivo experiments.

Results

GelMA10%-Nanoclay8%-Metformin5mg/mL was selected as the bioink for 3D printing due to its favorable swelling rate, degradation rate, mechanical strength, and drug release rate. Through in vitro investigations, the hydrogel scaffold extract, enriched with metformin, demonstrated a substantial enhancement in the proliferation and migration of BMSCs within a high-glucose microenvironment. It effectively enhances osteogenesis, angiogenesis, and immunomodulation. In vivo experimental outcomes further underscored the efficacy of the metformin-loaded GelMA-Nanoclay hydrogel scaffold in promoting superior bone regeneration within diabetic bone defects.

Conclusions

In conclusion, while previous studies have explored local delivery of metformin for bone regeneration, our research is pioneering in its application to diabetic bone defects using a 3D printed GelMA-Nanoclay hydrogel scaffold. This localized delivery approach demonstrates significant potential for enhancing bone regeneration in diabetic patients, offering a novel approach for treating diabetic bone defects.

The translational potential of this article

Our study demonstrates, for the first time, the successful loading of the systemic antidiabetic drug metformin onto a hydrogel scaffold for localized delivery. This approach exhibits significant efficacy in mending diabetic bone defects, presenting a promising new avenue for the treatment of such conditions.

Low hysteresis zwitterionic supramolecular polymer ion-conductive elastomers with anti-freezing properties, high stretchability, and self-adhesion for flexible electronic devices

The fabrication of stretchable ionic conductors with low hysteresis and anti-freezing properties to enhance the durability and reliability of flexible electronics even at low temperatures remains an unmet challenge. Here, we report a facile strategy to fabricate low hysteresis, high stretchability, self-adhesion and anti-freezing zwitterionic supramolecular polymer ion-conductive elastomers (ICEs) by photoinitiated polymerization of aqueous precursor solutions containing a newly designed zwitterionic monomer carboxybetaine ureido acrylate (CBUIA) followed by solvent evaporation. The resultant poly(carboxybetaine ureido acrylate) (PCBUIA) ICEs are highly stretchable and self-adhesive owing to the presence of strong hydrogen bonds between ureido groups and dipole-dipole interactions of zwitterions. The zwitterion groups on the polymer side chains and loaded-lithium chloride endow PCBUIA ICEs with excellent anti-freezing properties, demonstrating mechanical flexibility and ionic transport properties even at a low temperature (-20 °C). Remarkably, the PCBUIA ICEs demonstrate a low hysteresis (≈10%) during cyclic mechanical loading-unloading (≤500%), and are successfully applied as wearable strain sensors and triboelectric nanogenerators (TENGs) for energy harvesting and human motion monitoring. In addition, the PCBUIA ICE-based TENG was used as a wireless sensing terminal for Internet of Things smart devices to enable wireless sensing of finger motion state detection.

Cell-Reprogramming-Inspired Dynamically Responsive Hydrogel Boosts the Induction of Pluripotency via Phase-Separated Biomolecular Condensates

Induced pluripotent stem cells (iPSCs) have wide applications in disease modeling, personalized medicine, and tissue engineering. The generation of iPSCs from somatic cells via transcriptional-factor- or chemical molecule-based approaches are time-consuming and inefficient. Here, a cell-reprogramming-inspired dynamically responsive hydrogel is fabricated via a synthetic-biology-based strategy. Human and mouse somatic cells (including senescent cells) are efficiently reprogrammed into iPSCs that exhibit key features of embryonic stem cells. The cell-reprogramming-responsive hydrogel possesses dynamic bioresponsiveness, and it faithfully senses metabolic remodeling and extracellular acidification during cell reprogramming, responding by changing its mechanical properties accordingly. Mechanistic study demonstrates that the autonomous change of the mechanical properties of the cell-reprogramming-responsive hydrogel elicits the formation of Yes-associated protein (YAP) biomolecular condensates with the appropriate timing during cell reprogramming, ensuring a faster and more efficient generation of iPSCs than conventional cell reprogramming approach. Taken together, this study reveals the robust induction of pluripotency by coordination of cell-reprogramming-inspired dynamically responsive hydrogel and phase-separated biomolecular condensates.

Hydrogen Bonds Reinforced Ionogels with High Sensitivity and Stable Autonomous Adhesion as Versatile Ionic Skins

Flexible wearable sensors have demonstrated enormous potential in various fields such as human health monitoring, soft robotics, and motion detection. Among them, sensors based on ionogels have garnered significant attention due to their wide range of applications. However, the fabrication of ionogels with high sensitivity and stable autonomous adhesion remains a challenge, thereby limiting their potential applications. Herein, we present an advanced ionogel (PACG-MBAA) with exceptional performances based on multiple hydrogen bonds, which is fabricated through one-step radical polymerization of N-acryloylglycine (ACG) in 1-ethyl-3-methylimidazolium ethyl sulfate (EMIES) in the presence of N,N'-methylenebis(acrylamide) (MBAA). Compared with the ionogel (PAA-MBAA) formed by polymerization of acrylic acid (AA) in EMIES, the resulting ionogel exhibits tunable mechanical strength (35-130 kPa) and Young's modulus comparable to human skin (60-70 kPa) owing to the multiple hydrogen bonds formation. Importantly, they demonstrate stable autonomous adhesion to various substrates and good self-healing capabilities. Furthermore, the ionogel-based sensor shows high sensitivity (with a gauge factor up to 6.16 in the tensile range of 300-700%), enabling the detection of both gross and subtle movements in daily human activities. By integration of the International Morse code, the ionogel-based sensor enables the encryption, decryption, and transmission of information, thus expanding its application prospects.

Mutable Collagenous Tissue: A Concept Generator for Biomimetic Materials and Devices

Echinoderms (starfish, sea-urchins and their close relations) possess a unique type of collagenous tissue that is innervated by the motor nervous system and whose mechanical properties, such as tensile strength and elastic stiffness, can be altered in a time frame of seconds. Intensive research on echinoderm 'mutable collagenous tissue' (MCT) began over 50 years ago, and over 20 years ago, MCT first inspired a biomimetic design. MCT, and sea-cucumber dermis in particular, is now a major source of ideas for the development of new mechanically adaptable materials and devices with applications in diverse areas including biomedical science, chemical engineering and robotics. In this review, after an up-to-date account of present knowledge of the structural, physiological and molecular adaptations of MCT and the mechanisms responsible for its variable tensile properties, we focus on MCT as a concept generator surveying biomimetic systems inspired by MCT biology, showing that these include both bio-derived developments (same function, analogous operating principles) and technology-derived developments (same function, different operating principles), and suggest a strategy for the further exploitation of this promising biological resource.

Supramolecular hydrogels for wound repair and hemostasis

The unique network characteristics and stimuli responsiveness of supramolecular hydrogels have rendered them highly advantageous in the field of wound dressings, showcasing unprecedented potential. However, there are few reports on a comprehensive review of supramolecular hydrogel dressings for wound repair and hemostasis. This review first introduces the major cross-linking methods for supramolecular hydrogels, which includes hydrogen bonding, electrostatic interactions, hydrophobic interactions, host-guest interactions, metal ligand coordination and some other interactions. Then, we review the advanced materials reported in recent years and then summarize the basic principles of each cross-linking method. Next, we classify the network structures of supramolecular hydrogels before outlining their forming process and propose their potential future directions. Furthermore, we also discuss the raw materials, structural design principles, and material characteristics used to achieve the advanced functions of supramolecular hydrogels, such as antibacterial function, tissue adhesion, substance delivery, anti-inflammatory and antioxidant functions, cell behavior regulation, angiogenesis promotion, hemostasis and other innovative functions in recent years. Finally, the existing problems as well as future development directions of the cross-linking strategy, network design, and functions in wound repair and hemostasis of supramolecular hydrogels are discussed. This review is proposed to stimulate further exploration of supramolecular hydrogels on wound repair and hemostasis by researchers in the future.

Combination of biodegradable hydrogel and antioxidant bioadhesive for treatment of breast cancer recurrence and radiation skin injury

Postoperative radiotherapy is the standard method for inhibition of breast cancer recurrence and metastasis, whereas radiation resistant and ineluctable skin radiation injury are still key problems encountered in the prognosis of breast cancer. Herein, we design an internally implantable biodegradable hydrogel and extracutaneously applicable antioxidant bioadhesive to concurrently prevent postoperative tumor recurrence and radioactive skin injury after adjuvant radiotherapy. The biodegradable silk fibroin/perfluorocarbon hydrogel loading doxorubicin (DOX) formed by consecutive ultrasonication-induced β-sheets-crosslinked amphiphilic silk fibroin/perfluorocarbon/DOX nanoemulsion, exhibits continuous release of oxygen in physiological environment to improve hypoxia and sensitivity of radiotherapy, as well as simultaneous release of DOX to finally achieve effective anti-cancer effect. A stretchable bioadhesive is fabricated by copolymerization of α-thioctic acid and N, N-diacryloyl-l-lysine, and gold nanorods and gallic acid are loaded into the bioadhesive to afford gentle photothermal therapy and antioxidant functions. The near-infrared light-induced controlled release of gallic acid and mild photothermal therapy can efficiently eliminate excess free radicals generated by radiotherapy and promote radioactive wound healing. Ultimately, in vivo animal studies substantiate the efficacy of our methodology, wherein the post-tumor resection administration of hydrogel and concomitant application of an antioxidant bioadhesive patch effectively inhibit tumor recurrence and attenuate the progression of skin radiation damage.

Polysaccharides, proteins, and synthetic polymers based multimodal hydrogels for various biomedical applications: A review

Nature-derived or biologically encouraged hydrogels have attracted considerable interest in numerous biomedical applications owing to their multidimensional utility and effectiveness. The internal architecture of a hydrogel network, the chemistry of the raw materials involved, interaction across the interface of counter ions, and the ability to mimic the extracellular matrix (ECM) govern the clinical efficacy of the designed hydrogels. This review focuses on the mechanistic viewpoint of different biologically driven/inspired biomacromolecules that encourages the architectural development of hydrogel networks. In addition, the advantage of hydrogels by mimicking the ECM and the significance of the raw material selection as an indicator of bioinertness is deeply elaborated in the review. Furthermore, the article reviews and describes the application of polysaccharides, proteins, and synthetic polymer-based multimodal hydrogels inspired by or derived from nature in different biomedical areas. The review discusses the challenges and opportunities in biomaterials along with future prospects in terms of their applications in biodevices or functional components for human health issues. This review provides information on the strategy and inspiration from nature that can be used to develop a link between multimodal hydrogels as the main frame and its utility in biomedical applications as the primary target.

Bioinspired Polymers: Transformative Applications in Biomedicine and Regenerative Medicine

Bioinspired polymers have emerged as a promising field in biomaterials research, offering innovative solutions for various applications in biomedical engineering. This manuscript provides an overview of the advancements and potential of bioinspired polymers in tissue engineering, regenerative medicine, and biomedicine. The manuscript discusses their role in enhancing mechanical properties, mimicking the extracellular matrix, incorporating hydrophobic particles for self-healing abilities, and improving stability. Additionally, it explores their applications in antibacterial properties, optical and sensing applications, cancer therapy, and wound healing. The manuscript emphasizes the significance of bioinspired polymers in expanding biomedical applications, addressing healthcare challenges, and improving outcomes. By highlighting these achievements, this manuscript highlights the transformative impact of bioinspired polymers in biomedical engineering and sets the stage for further research and development in the field.

A gel microparticle-based self-thickening strategy for 3D printing high-modulus hydrogels skeleton cushioned with PNAGA hydrogel mimicking anisotropic mechanics of meniscus

Developing a meniscus substitute mimicking the anisotropic mechanics (higher circumferential tensile modulus and lower compressive modulus) of native tissue remains a great challenge. In this work, based on the pendant group structure-dependent H-bonding strengthening mechanism, two kinds of amide-based H-bonding crosslinked hydrogels with distinct mechanical behaviors, that is, the flexible poly(N-acryloyl glycinamide) (PNAGA) and the ultra-stiff poly(N-acryloylsemicarbazide) (PNASC) hydrogels are employed to construct the biomimetic meniscus substitute. To this end, a gel microparticle-based self-thickening strategy is first proposed to fabricate PNASC (GMP-PNASC) high-modulus hydrogels skeleton by extrusion printing technology in mimicking the collagen fibers in native meniscus to resist the circumferential tensile stress. Then, the PNAGA hydrogel is infused into the PNASC skeleton to replicate the proteoglycan, providing a lower compressive modulus. By regulating the structural features at the interior and peripheral regions, the GMP-PNASC/PNAGA hydrogel meniscus scaffold with the higher tensile modulus (87.28 ± 6.06 MPa) and lower compressive modulus (2.11 ± 0.28 MPa) can be constructed. In vivo outcome at 12 weeks post-implantation of rabbit's medial meniscectomy model confirms the effects of GMP-PNASC/PNAGA meniscus scaffold on alleviating the wear of articular cartilage and ameliorating the development of osteoarthritis (OA).

Room Temperature Ca2+-Initiated Free Radical Polymerization for the Preparation of Conductive, Adhesive, Anti-freezing and UV-Blocking Hydrogels for Monitoring Human Movement

In recent years, conductive hydrogels have received increasing attention as wearable electronics due to the electrochemical properties of conductive polymers combined with the softness of hydrogels. However, conventional hydrogels are complicated to prepare, require high temperature or UV radiation to trigger monomer polymerization, and are frozen at low temperatures, which seriously hinder the application of flexible wearable devices. In this paper, a conductive sensor integrating mechanical properties, adhesion, UV shielding, anti-dehydration, and anti-freeze was prepared based on Ca²⁺-initiated radical polymerization at room temperature using the synergy of sodium lignosulfonate, acrylamide (AM), and calcium chloride (CaCl₂). Metal ions can activate ammonium persulfate to generate free radicals that allow rapid gelation of AM monomers at room temperature without external stimuli. Due to ionic cross-linking and non-covalent interaction, the hydrogels have good tensile properties (1153% elongation and 168 kPa tensile strength), high toughness (758 KJ·m^-3), excellent adhesive properties (48.5 kPa), high ionic conductivity (7.2 mS·cm^-1), and UV resistance (94.4%). CaCl₂ can inhibit ice nucleation, so that the hydrogels have anti-dehydration and frost resistance properties and even at -80 °C can maintain flexibility, high conductivity, and adhesion. Assembled into a flexible sensor, it can sense various large and small movements such as compression, bending, and talking, which is a flexible sensing material with wide application prospects.

Hydrogels with ultra-highly additive adjustable toughness under quasi-isochoric conditions

Bioinspired smart hydrogels with additive-switchable mechanical properties have been attracting increasing attention in recent years. However, most existing hydrogel systems suffer from limited stiffening amplitude and dramatic volume change upon response to environmental triggers. Herein, we propose a novel strategy to prepare additive-responsive hydrogels with ultra-highly adjustable toughness under quasi-isochoric conditions. The key point lies in tuning the softening transition temperature of the hydrogels with non-covalent interactions between the polymer networks and additives, shifting the hydrogels from glassy to rubbery states. As a proof of concept, a variety of glassy hydrogels are prepared and exposed to additives to trigger responsive performances. Young's modulus of the same hydrogel demonstrates up to 36 000 times ultra-broad-range tunability, ranging from 0.0042 to 150 MPa in response to different additives. Meanwhile, negligible volume changes occur, keeping the hydrogels in quasi-isochoric conditions. Interestingly, the mechanical behaviors of the hydrogels manifest remarkable dependence on the additive type and concentration since both the Hofmeister effect and hydrophobicity of the additives play pivotal roles according to mechanism investigations. Furthermore, the regulation with additives reveals satisfactory reversibility and universality. Taken together, this simple and effective approach provides a novel strategy to fabricate hydrogels with highly tunable toughness for versatile applications, including spatially patterned conductive gels and anti-icing coatings.

One-Step Soaking Strategy toward Anti-Swelling Hydrogels with a Stiff "Armor"

Double-network (DN) hydrogels consisting of noncovalent interacting networks are highly desired due to their well-controlled compositions and environmental friendliness, but the low water resistance always impairs their mechanical strength. Here, an anti-swelling hydrogel possessing the core/shell architecture through rational regulation of multiple weak noncovalent interactions is prepared. A composite hydrogel consists of chitosan (CS) and poly(N-acryloyl 2-glycine) (PACG), readily forming the shell-structured DN hydrogel after soaking in a FeCl₃ solution because of in situ formation of chain entanglements, hydrogen bonds, and ionic coordination. The produced DN hydrogels exhibit excellent anti-swelling behaviors and mechanical durability for over half a year, even in some strict situations. Taking the merits of noncovalent bonds in adjustability and reversibility, the swelling property of these hydrogels can be easily customized through control of the ion species and concentrations. A dynamically reversible transition from super-swelling to anti-swelling is realized by breaking up and rebuilding the metal-coordination complexes. This facile but efficient strategy of turning the noncovalent interactions and consequently the mechanics and anti-swelling properties is imperative to achieve the rational design of high-performance hydrogels with specific usage requirements and expand their applicability to a higher stage.

Robust hydrogel adhesives for emergency rescue and gastric perforation repair

Development of biocompatible hydrogel adhesives with robust tissue adhesion to realize instant hemorrhage control and injury sealing, especially for emergency rescue and tissue repair, is still challenging. Herein, we report a potent hydrogel adhesive by free radical polymerization of N-acryloyl aspartic acid (AASP) in a facile and straightforward way. Through delicate adjustment of steric hindrance, the synergistic effect between interface interactions and cohesion energy can be achieved in PAASP hydrogel verified by X-ray photoelectron spectroscopy (XPS) analysis and simulation calculation compared to poly (N-acryloyl glutamic acid) (PAGLU) and poly (N-acryloyl amidomalonic acid) (PAAMI) hydrogels. The adhesion strength of the PAASP hydrogel could reach 120 kPa to firmly seal the broken organs to withstand the external force with persistent stability under physiological conditions, and rapid hemostasis in different hemorrhage models on mice is achieved using PAASP hydrogel as physical barrier. Furthermore, the paper-based Fe³⁺ transfer printing method is applied to construct PAASP-based Janus hydrogel patch with both adhesive and non-adhesive surfaces, by which simultaneous wound healing and postoperative anti-adhesion can be realized in gastric perforation model on mice. This advanced hydrogel may show vast potential as bio-adhesives for emergency rescue and tissue/organ repair.

•

The hydrogel with good mechanical properties and adhesiveness is designed.

•

The hydrogel adhesive can act as physical barrier for emergency rescue.

•

The Janus hydrogel can realize efficient gastric perforation repair on mice.

M, Zarrintaj P, Formela K, Saeb MR, Bencherif SA. Clickable Polysaccharides for Biomedical Applications: A Comprehensive Review

Recent advances in materials science and engineering highlight the importance of designing sophisticated biomaterials with well-defined architectures and tunable properties for emerging biomedical applications. Click chemistry, a powerful method allowing specific and controllable bioorthogonal reactions, has revolutionized our ability to make complex molecular structures with a high level of specificity, selectivity, and yield under mild conditions. These features combined with minimal byproduct formation have enabled the design of a wide range of macromolecular architectures from quick and versatile click reactions. Furthermore, copper-free click chemistry has resulted in a change of paradigm, allowing researchers to perform highly selective chemical reactions in biological environments to further understand the structure and function of cells. In living systems, introducing clickable groups into biomolecules such as polysaccharides (PSA) has been explored as a general approach to conduct medicinal chemistry and potentially help solve healthcare needs. De novo biosynthetic pathways for chemical synthesis have also been exploited and optimized to perform PSA-based bioconjugation inside living cells without interfering with their native processes or functions. This strategy obviates the need for laborious and costly chemical reactions which normally require extensive and time-consuming purification steps. Using these approaches, various PSA-based macromolecules have been manufactured as building blocks for the design of novel biomaterials. Clickable PSA provides a powerful and versatile toolbox for biomaterials scientists and will increasingly play a crucial role in the biomedical field. Specifically, bioclick reactions with PSA have been leveraged for the design of advanced drug delivery systems and minimally invasive injectable hydrogels. In this review article, we have outlined the key aspects and breadth of PSA-derived bioclick reactions as a powerful and versatile toolbox to design advanced polymeric biomaterials for biomedical applications such as molecular imaging, drug delivery, and tissue engineering. Additionally, we have also discussed the past achievements, present developments, and recent trends of clickable PSA-based biomaterials such as 3D printing, as well as their challenges, clinical translatability, and future perspectives.

Redox-triggerable firefly luciferin-bioinspired hydrogels as injectable and cell-encapsulating matrices

A novel redox-triggered bioinspired hydrogel platform that offers high control over gelation onset and kinetics is presented. This platform is suitable for the development of injectable matrices.

Injectable, Intrinsically Antibacterial Conductive Hydrogels with Self-Healing and pH Stimulus Responsiveness for Epidermal Sensors and Wound Healing

Torealize intelligent and personalized medicine, it is a huge challenge to develop a hydrogel dressing that can be used as a sensor to monitor human health in real-time while promoting wound healing. Herein, an injectable, self-healing, and conductive chitosan-based (CPT) hydrogel with pH responsiveness and intrinsic antibacterial properties was fabricated via a Schiff base linkage and a hydrogen bond. Due to the introduction of Schiff base bonds, the injectable CPT hydrogel exhibits various excellent properties, such as pH responsiveness to sol-gel transition, self-healing properties, and broad-spectrum antibacterial properties even without additional antibacterial agents. In vitro experiments verify the excellent biocompatibility of the as-prepared hydrogel. An in vivo experiment in a mouse full-thickness skin-wound model was performed to confirm the outstanding effect on wound healing. Meanwhile, as epidermal sensors, the conductive hydrogel that perceives various human activities in real-time could provide the real-time analysis of the patient's healthcare information. Based on these excellent properties, the CPT hydrogel, as a biological dressing with a sensing function, lays a solid foundation for the further realization of personalized medicine.

Natural Polymeric Scaffolds for Tissue Engineering Applications

Natural polymeric scaffolds can be used for tissue engineering applications such as cell delivery and cell-free supporting of native tissues. This is because of their desirable properties such as; high biocompatibility, tunable mechanical strength and conductivity, large surface area, porous- and extracellular matrix (ECM)-mimicked structures. Specifically, their less toxicity and biocompatibility makes them suitable for several tissue engineering applications. For these reasons, several biopolymeric scaffolds are currently being explored for numerous tissue engineering applications. To date, research on the nature, chemistry, and properties of nanocomposite biopolymers are been reported, while the need for a comprehensive research note on more tissue engineering application of these biopolymers remains. As a result, this present study comprehensively reviews the development of common natural biopolymers as scaffolds for tissue engineering applications such as cartilage tissue engineering, cornea repairs, osteochondral defect repairs, and nerve regeneration. More so, the implications of research findings for further studies are presented, while the impact of research advances on future research and other specific recommendations are added as well.

Marine polysaccharide-based composite hydrogels containing fucoidan: Preparation, physicochemical characterization, and biocompatible evaluation

Marine polysaccharide-based hydrogels have drawn much attention for diversified biomedical applications owing to their excellent (bio)physicochemical properties. In the present work, a series of marine polysaccharide-based hydrogels composed of chitosan, alginate, or fucoidan are prepared via a facile chemical cross-linking approach in an alkali/urea aqueous system. The prepared hydrogels possess tunable microporous architecture, swelling, and biodegradable properties by changing the components and proportions of marine polysaccharides. Importantly, the developed hydrogels are mechanically robust and the maximum compressive stress is up to 28.37 ± 4.63 kPa. Furthermore, the composite hydrogels exhibit excellent cytocompatibility, blood compatibility, and histocompatibility. When implanted subcutaneously in rats, the hydrogels containing fucoidan inhibit the inflammatory response of surrounding tissue. Thus, the designed composite hydrogels are promising bio-scaffolds in biomedical applications.

3D printing of lubricative stiff supramolecular polymer hydrogels for meniscus replacement

3D printing of a stiff and lubricative hydrogel-based meniscus substitute has been challenging since printability and stiffness compromise each other. In this work, based on an upgraded self-thickening and self-strengthening strategy, a unique multiple H-bonding monomer N-acryloylsemicarbazide (NASC) is firstly copolymerized with a super-hydrophilic monomer carboxybetaine acrylamide (CBAA) in dimethyl sulfoxide (DMSO)/H2O to form a soft poly(NASC-co-CBAA) gel, in which PCBAA serves to weaken the H-bonding interaction and avoid hydrophobic phase separation. The poly(NASC-co-CBAA) gel is then loaded with concentrated NASC and CBAA, followed by heating to form a thickening sol ink, which is printed into different objects that are further photoirradiated to initiate the copolymerization of entrapped NASC and CBAA, resulting in the formation of a high performance hydrogel with a Young's modulus of 10.98 MPa, tensile strength of 1.87 MPa and tearing energy of 5333 J m-2 after DMSO is completely replaced with water, due to the re-establishment of NASC H-bonds. Importantly, PCBAA affords high lubricity in printed hydrogels. The printed PNASC-PCBAA meniscus substitute can substitute rabbit's native meniscus and ameliorate the cartilage surface wear within a set 12-week time window, portending great potential as a meniscal substitute and other soft-supporting tissue scaffolds.

Multivalent Amide-Hydrogen-Bond Supramolecular Binder Enhances the Cyclic Stability of Silicon-Based Anodes for Lithium-Ion Batteries

A supramolecular polymer, poly(N-acryloyl glycinamide) (PNAGA), with a bisamide group on each side of the chain forming multiple amide-hydrogen bonds was synthesized in this work as a binder for silicon (Si)-based anodes. This supramolecular polymer binder with improved mechanical properties presents good interfacial adhesion with Si particles forming hydrogen bonds and enhances the adhesive strength between the electrode material film and the copper current collector. Benefiting from the highly stable inter- and intramolecular multiple amide-hydrogen bonds of the PNAGA binder, the electrode structure maintains integrity and a stable solid electrolyte interphase (SEI) layer is formed on the surface of Si particles. The effect of different binders on the composition of the SEI film was also investigated by X-photoelectron spectroscopy (XPS) characterization. In comparison with polyacrylamide (PAM), which has a similar structure to PNAGA, and the traditional sodium alginate (SA) binder, the Si electrode containing the PNAGA binder shows improved electrochemical performance. The capacity retention is 84% after 100 cycles at 420 mA g^-1, and the capacity remains at 1942.6 mAh g^-1 after 400 cycles at 1260 mA g^-1. Even with a mass loading of 1.2 mg cm^-2 Si, the electrode with the PNAGA binder exhibits high initial areal capacity (2.64 mAh cm^-2) and good cycling performance (81% capacity retention after 50 cycles). Moreover, the application of the PNAGA binder also brings a stable cycle performance to the commercial Si-graphite (SiC) anode material.

Self-Adhesive, Stretchable, Biocompatible, and Conductive Nonvolatile Eutectogels as Wearable Conformal Strain and Pressure Sensors and Biopotential Electrodes for Precise Health Monitoring

Conductive stretchable hydrogels and ionogels consisting of ionic liquids can have interesting application as wearable strain and pressure sensors and bioelectrodes due to their soft nature and high conductivity. However, hydrogels have a severe stability problem because of water evaporation, whereas ionogels are not biocompatible or even toxic. Here, we demonstrate self-adhesive, stretchable, nonvolatile, and biocompatible eutectogels that can always form conformal contact to skin even during body movement along with their application as wearable strain and pressure sensors and biopotential electrodes for precise health monitoring. The eutectogels consist of a deep eutectic solvent that has high conductivity, waterborne polyurethane that is an elastomer, and tannic acid that is an adhesive. They can have an elongation at a break of 178%, ionic conductivity of 0.22 mS/cm, and adhesion force of 12.5 N/m to skin. They can be used as conformal strain sensors to accurately monitor joint movement and breath. They can be even used as pressure sensors with a piezoresistive sensitivity of 284.4 kPa^-1 to precisely detect subtle physical movements like arterial pulses, which can provide vital cardiovascular information. Moreover, the eutectogels can be used as nonvolatile conformal electrodes to monitor epidermal physiological signals, such as electrocardiogram (ECG) and electromyogram (EMG).

An Integrated Design of a Polypseudorotaxane-Based Sea Cucumber Mimic

The development of integrated systems that mimic the multi-stage stiffness change of marine animals such as the sea cucumber requires the design of molecularly tailored structures. Herein, we used an integrated biomimicry design to fabricate a sea cucumber mimic using sidechain polypseudorotaxanes with tunable nano-to-macroscale properties. A series of polyethylene glycol (PEG)-based sidechain copolymers were synthesized to form sidechain polypseudorotaxanes with α-cyclodextrins (α-CDs). By tailoring the copolymers' molecular weights and their PEG grafting densities, we rationally tuned the sizes of the formed polypseudorotaxanes crystalline domain and the physical crosslinking density of the hydrogels, which facilitated 3D printing and the mechanical adaptability to these hydrogels. After 3D printing and photo-crosslinking, the obtained hydrogels exhibited large tensile strain and broad elastic-to-plastic variations upon α-CD (de)threading. These discoveries enabled a successful fabrication of a sea cucumber mimic, demonstrating multi-stage stiffness changes.

Recent Advances in Design Strategies for Tough and Stretchable Hydrogels

The development of multifunctional hydrogels with excellent stretchability and toughness is one of the most fascinating subjects in soft matter research. Numerous research efforts have focused on the design of new hydrogel systems with superior mechanical properties because of their potential applications in diverse fields. In this Minireview, we consider the most up-to-date mechanically strong hydrogels and summarize their design strategies based on the formation of double networks and dual physical crosslinking. Based on the synthetic approaches and different toughening mechanisms, double-network hydrogels can be further classified into three different categories, namely chemically crosslinked, hybrid physically-chemically crosslinked, and fully physically crosslinked. In addition to the above-mentioned methods, we also discuss few uniquely designed hydrogels with the intention of guiding the future development of these fascinating materials for superior mechanical performance.

Flame-retardant PNIPAAm/sodium alginate/polyvinyl alcohol hydrogels used for fire-fighting application: Preparation and characteristic evaluations

A novel fire-preventing triple-network (TN) hydrogel was prepared and laminated on cotton fabric to improve fire-resistant performance of cellulose fabric. The TN hydrogel composed of Poly (N-isopropylacrylamide) (PNIPAAm)/sodium alginate (SA)/ Poly (vinyl alcohol) (PVA) exhibited excellent swelling ratio, swelling-deswelling behavior and antibacterial property. Results indicated that introduction of SA could improve water retention capabilities of TN hydrogels. Thermogravimetric experiments showed that the thermal stability of hydrogels was best at a SA: PVA ratio of 2:1. Furthermore, the obtained hydrogel-cotton fabric laminates displayed efficient flame retardancy. Compared to original fabric, hydrogel-fabric laminates were nearly undamaged when exposed to fire for 12 s. This result is attributed to energy absorption as water is heated and evaporates in the hydrogel. The present work provides a new concept to prepare fire-resistant polymer fabric, which may be used in fire-protective clothing to protect the skin from burn injuries.

Highly Stretchable, Tough, Resilient, and Antifatigue Hydrogels Based on Multiple Hydrogen Bonding Interactions Formed by Phenylalanine Derivatives

Noncovalent cross-linked hydrogels with promising mechanical properties are on demand for applications in tissue engineering, flexible electronics, and actuators. However, integrating excellent mechanical properties with facile preparation for the design of hydrogen bond cross-linked hydrogels is still challenging. In this work, an advanced hydrogel was prepared from acrylamide and N-acryloyl phenylalanine by one-pot free-radical copolymerization. Owing to hydrophobicity-assisted multiple hydrogen bonding interactions among phenylalanine derivatives, the hydrogels exhibited fascinating mechanical behaviors: tensile strength of 0.35 MPa, elongation at break of 2100%, tearing energy of 1134 J/m², and compression strength of 3.56 MPa. The hydrogels also showed robust elasticity and fatigue resistance, and the compression strength did not show any decline, even after 100 successive cycles, as well as promising self-recovery property. In addition, the cytotoxicity test in vitro proved that the hydrogel showed good biocompatibility with normal human liver cells (LO2 cells). The excellent stretchability, robust elasticity, high toughness, fatigue resistance, and biocompatibility of the hydrogel demonstrated its vast potential in the biomedical field and flexible electronic devices.

Nature-inspired semi-IPN hydrogels with tunable mechanical properties and multi-responsiveness

Tough hydrogels (PAP hydrogels) with high mechanical properties and multi-responsiveness.

Three-Dimensional Printed Hydrogels with High Elasticity, High Toughness, and Ionic Conductivity for Multifunctional Applications

Hydrogels have drawn extensive attention due to their unique physical and biological properties. However, the relatively low mechanical strength and poor processability of hydrogels limit their applications. Especially, the emerging 3D printing technology for nontoxic hydrogels requires proper formability and controllable mechanical behaviors. In this study, a new strategy to construct a novel double-network biocompatible hydrogel from poly(ethylene glycol) diacrylate (PEGDA) and short-chain chitosan (CS) via ionic-covalent cross-linking is by a two-step method involving UV curing followed by immersion in an anionic solution. The CS-based ionic network and PEGDA-based covalent network as well as the hydrogen bonds between them jointly induce excellent mechanical properties, which can be regulated by changing the PEGDA/CS content and ionic cross-linking time. Compared with conventional hydrogels, this mechanically optimized hydrogel exhibits a superior elastic modulus (3.84 ± 0.4 MPa), higher tensile strength (7.23 ± 0.2 MPa), and higher tensile strain (162 ± 7%). Notably, its excellent printing capability through the citrate anionic solution adjustment enables 3D printing with precision, flexibility, and a complex inner structure by extrusion in air at room temperature. In addition, a number of citrate ions existed in the ionic network, giving the hydrogels good electrical conductivity. Therefore, this printable, conductive, and tough hydrogel exhibits potential for vascular engineering, cartilage tissue engineering, and wearable device applications.

Integration of Macro-Cross-Linker and Metal Coordination: A Super Stretchable Hydrogel with High Toughness

The development of multifunctional hydrogels with high strength and stretchability is one of the most important topics in soft-matter research owing to their potential applications in various fields. In this work, a dual physically cross-linked network was designed for the fabrication of ultrastretchable tough hydrogels. The hydrogels were prepared through in situ polymerization of acrylic acid and acrylamide in the presence of positively charged quaternary poly(ethylene imine) (Q-PEI) and micelle-forming Pluronic F127 diacrylate, thus introducing electrostatic interactions between the positively charged Q-PEI and negatively charged poly(acrylic acid-co-acrylamide). For further mechanical reinforcement, Ca²⁺ and Cu²⁺ ions were introduced into the hydrogel network to construct coordination bonds, significantly enhancing tensile strength as well as stretchability. The hydrogel prepared with Ca²⁺ ion coordination bonds was found to be stretchable to 108 times its original length and exhibited a maximum toughness of 177 MJ·m^-3, representing one of the most robust systems with both extraordinary toughness and superstretchability prepared to date. The hydrogels also exhibited excellent recovery of dimensions and reproducibility in terms of mechanical properties, providing a promising ultrastretchable soft-matter system with outstanding mechanical strength.

H-Bonding Supramolecular Hydrogels with Promising Mechanical Strength and Shape Memory Properties for Postoperative Antiadhesion Application

Development of a physical barrier with mechanical properties similar to human smooth muscle and an on-demand degradation profile is crucial for the clinical prevention of postoperative adhesion. Herein, a series of supramolecular hydrogels (PMI hydrogels) composed of poly(ethylene glycol) (PEG), methylenediphenyl 4, 4-diisocyanate (MDI), and imidazolidinyl urea (IU, hydrogen bonding reinforced factor) with biodegradability and high toughness are reported to serve as physical barriers for abdominal adhesion prevention. The tensile fracture strength and strain of the PMI hydrogels could be adjusted in the ranges of 0.6-2.3 MPa and 100-440%, respectively, and their Young's moduli (0.2-1.6 MPa) are close to that of human soft tissues like smooth muscle and skin tissue as well as they have outstanding shape memory properties. The PMI hydrogels show good cell and tissue biocompatibility, and the in vivo retention time is in accord with the needs for the postoperative antiadhesion physical barriers. Through an abdominal defect model on mice, this study shows that the PMI hydrogel can completely prevent tissue adhesion compared to the commercialized Seprafilm with high safety. Owing to the promising mechanical properties and good biocompatibility, the PMI hydrogels may be extended for various biomedical applications and the development of advanced flexible electronic devices.

A robust poly(N-acryloyl-2-glycine)-based sponge for rapid hemostasis

The development of a hemostatic sponge that can be used for treating both arterial hemorrhage and non-compressible bleeding remains a challenge. In this work, we propose the fabrication of a robust hemostatic sponge by a hydrogen bond strengthening and in situ bubble expanding strategy in thermo-initiation polymerization. A thickening agent, carboxymethyl cellulose (CMC), is incorporated into a hydrogen bonding N-acryloyl-2-glycine (ACG) monomer and an initiator, and vortexing generates air bubbles in the viscous liquid. Heating initiates fast polymerization, and meanwhile aids in expanding of bubbles, which results in the fixation of bubbles throughout the network, and the formation of porous hydrogels. Further lyophilization of the foaming hydrogels leads to the final generation of PACG/CMC sponges with robust compressive strengths due to the hydrogen bonding interactions of PACG. PACG/CMC sponges are shown to demonstrate a tunable liquid absorption ability, in vitro hemostatic ability, better hemocompatibility and cytocompatibility. In a rat liver injury model and a femoral artery injury model, the PACG/CMC sponge can significantly reduce the bleeding time and blood loss compared with gauze and commercial gelatin sponge because of the high blood absorption ability and effective concentration of blood coagulation factors. This PACG sponge holds promising potential as a hemostatic agent applicable in an emergency.

Construction of supramolecular hydrogels using imidazolidinyl urea as hydrogen bonding reinforced factor

A new hydrogen bonding reinforced factor was introduced into polymer design for the preparation of supramolecular hydrogels with advanced properties.

Mechanically strong and tough hydrogels with pH-triggered self-healing and shape memory properties based on a dual physically crosslinked network

A kind of dual physically crosslinked hydrogel with pH-triggered self-healing and shape memory properties is reported.

Osmotic squat actuation in stiffness adjustable bacterial cellulose composite hydrogels

Stimuli-responsive stiffness change and squat actuation were realized in bacterial cellulose hydrogels by utilizing internal osmotic pressure changes.

Magnetic Elastomers with Smart Variable Elasticity Mimetic to Sea Cucumber

A magnetic-responsive elastomer consisting of magnetic elastomer and zinc oxide with a tetrapod shape and long arms was fabricated mimetic to the tissue of sea cucumber in which collagen fibrils are dispersed. Only the part of magnetic elastomer is active to magnetic fields, zinc oxide plays a role of reinforcement for the chain structure of magnetic particles formed under magnetic fields. The magnetic response of storage modulus for bimodal magnetic elastomers was measured when the magnetic particle was substituted to a nonmagnetic one, while keeping the total volume fraction of both particles. The change in storage modulus obeyed basically a mixing rule. However, a remarkable enhancement was observed at around the substitution ratio of 0.20. In addition, the bimodal magnetic elastomers with tetrapods exhibited apparent change in storage modulus even at regions with a high substitution ratio where monomodal magnetic elastomers consist of only magnetic particles with less response to the magnetic field. This strongly indicates that discontinuous chains of small amounts of magnetic particles were bridged by the nonmagnetic tetrapods. On the contrary, the change in storage modulus for bimodal magnetic elastomers with zinc oxide with irregular shape showed a mixing rule with a substitution ratio below 0.30. However, it decreased significantly at the substitution ratio above it. The structures of bimodal magnetic elastomers with tetrapods and the tissue of sea cucumber with collagen fibrils are discussed.