Nitrogen and Phosphorus Co-Doped Carbon Nanodots as a Novel Fluorescent Probe for Highly Sensitive Detection of Fe(3+) in Human Serum and Living Cells

Heteroatom-doped carbon dots from medicinal plants as novel biomaterials for as-use biomedical applications in comparison with synthetic drug, zaltoprofen

FN-doped carbon dots were synthesized using powdered leaves of Moringa oleifera L./Chromolaena odorata L./Tridax procumbens L./Tinospora cordifolia L./ and Lantana camara L., along with a precursor called 4,5-difluoro-1,2-benzenediamine (DFBD) and compared against the drug zaltoprofen derived carbon dots. They were assessed for their optical and structural characteristics using photoluminescence (optimal emission λ of 600 nm), vibrational (FTIR) spectroscopy (characteristic wave numbers of 1156 and 1269 cm-1 for C-F), as well as X-ray diffraction (XRD) (highest intensity at 27.56°) and high-resolution transmission electron microscopy (HR-TEM) (particles in the size range of 15-20 nm). Further, field emission scanning electron microscopy (FESEM) / energy dispersive spectroscopy (EDX) indicated FN doping of oval/oblong carbon dots. Membrane protection in percent is found to be 55.3 and 80.4 for FN-CDs and Z-FN-CDs respectively. The DPPH-free radical scavenging activity by FN-CDs was 69.4%, while with Z-FN-CDs, it was 54.2%. When tested on six bacterial strains (three each for gram-positive and gram-negative), the FN-CDs displayed a halo (ZOI) between 9 and 19 mm, whereas the Z-FN-CDs displayed a clearance zone between 9 and 17 mm. The FN-CDs showed significant emission-red-shift effects and demonstrated concentration-dependent biocompatibility and viability in neuroblastoma and beta-TC6-cell lines.

Green synthesis of yeast cell wall-derived carbon quantum dots with multiple biological activities

Hypothesis

Yeast cell walls are a sustainable biomass source containing carbon and other elements like phosphorus. Converting cell walls into valuable nanomaterials like carbon quantum dots (CQDs) is of interest.

Experiments

Cell walls from Saccharomyces cerevisiae were hydrothermally treated in 0.5 M H2SO4 to produce CQDs. Multiple analytical techniques were utilized to confirm phosphorus-doping (P-CQDs), characterize the fluorescence properties, determine quantum yield, and evaluate the sensing, antimicrobial, photocatalytic, and antioxidant capacities.

Findings

A successful synthesis of P-CQDs was achieved with strong blue fluorescence under UV excitation, 19 % quantum yield, and excellent stability. The P-CQDs showed sensitive fluorescence quenching in response to ferric ions with a 201 nM detection limit. Antibacterial effects against Escherichia coli and Staphylococcus aureus were demonstrated. P-CQDs also exhibited dye degradation under sunlight and antioxidant activity. So, the prepared P-CQDs displayed promising multifunctional capabilities for metal ion detection, disinfection, and environmental remediation. Further research is required to fully realize and implement the multifunctional potential of P-CQDs in real-world applications.

A fluorescence "turn-on" sensor for ascorbic acid in fruit juice and beverage based on ascorbate oxidase-like activity of citric acid-derived carbon dots

Citric acid-derived carbon dots (CA-CDs) without any modifications were found to have the ascorbate oxidase (AAO)-like activity. The CA-CDs have high affinity for ascorbic acid (AA), which is similar to natural AAO. The robustness of CA-CDs is greater than that of AAO. Based on the AAO mimetic activity of CA-CDs, a sensitive turn-on mode and natural enzyme-free fluorescence detection method has been developed for AA in some fruit juice and beverage samples with satisfied recoveries. This study provides CDs-based AAO mimetic nanozymes to replace the expensive natural enzymes or heavy metal-based nanozymes, which will show great potential in biological and food assays.

Manganese dioxide nanosheet-modulated ratiometric fluoroprobe based on carbon quantum dots from okra for selective and sensitive dichlorvos detection in foods

Herein, we developed a ratiometric fluoroprobe by integrating okra-derived carbon quantum dots (CQDs) with amplex red (AR) using manganese dioxide nanosheets (MnO2 NSs) as a medium. Fluorescence intensities (FIs) of CQDs were sharply quenched by MnO2 NSs via an inner-filter effect processes, whereas the FIs of AR were significantly enhanced due to oxidation of AR to AR-ox by the oxidase-mimetic activity of MnO2 NSs. Acetyrylcholinesterase hydrolyzed acetylthiocholine to produce thiocholine, and the decomposition of MnO2 NSs to Mn2+ by thiocholine led to the FI recovery of CQDs, but decreased FIs of AR-ox. Based on the above phenomenon and the inhibitory effect of dichlorvos (DDVP) on acetyrylcholinesterase activity, a novel ratiometric fluoroprobe for DDVP quantification was pioneered. Under optimized conditions, this fluoroprobe gave a wide linear range (4-120 μg/L), low detection limit (1.2 μg/L), and satisfactory fortification recoveries (90.0-110.0%), thereby providing good prospects for routine DDVP monitoring in foods.

A Dual-Mode Detection Sensor Based on Nitrogen-Doped Carbon Dots for Visual Detection of Fe(III) and Ascorbic Acid via a Smartphone

Accurately and promptly detecting Fe3+ and ascorbic acid (AA) is a crucial objective. In this study, nitrogen-doped carbon dots (N-CDs) were synthesized using a one-step hydrothermal synthesis method with 6,9-diamino-2-ethoxyacridine lactate as the precursor. The introduction of Fe3+ and AA resulted in both fluorescence (FL) quenching and enhancement of the synthesized N-CDs. The fluorescent response of the N-CDs probe to Fe3+ was observed in the concentration range of 5-20 µM and 25-50 µM, with a limit of detection (LOD) of 290 nM. Remarkably, the fluorescence of the N-CDs was recovered upon the addition of AA to the N-CDs-Fe3+ system. Using the "off-on" fluorescent N-CDs probe, a linear range of 40-90 µM was achieved with an LOD of 0.69 µM. Additionally, the feasibility of employing a smartphone equipped with an RGB Color Picker was demonstrated for the analysis of Fe3+ and AA concentrations, providing a novel visual detection method. Furthermore, the application of N-CDs in solution demonstrated considerable potential for visually detecting Fe3+ and AA. The proposed dual-mode detection sensor was found to be simple, efficient, and stable, enabling the successful determination of Fe3+ and AA in practical samples with satisfactory results.

Cationic fluorescent carbon dots with solution ultra-stability and its rapid/on-site sensing application for HClO

Carbon dots (CDs) as a remarkable fluorescent nanomaterial have the advantages of easy preparation, good photostability and high sensitivity. However, the poor aqueous solution stability of carbon dots largely limited their practical application due to the characteristic of easily forming precipitation for long time storage. Here, a kind of cationic fluorescent carbon dots CDs-P(Ph)3 was designed by introducing a cationic compound, (4-carboxybutyl) triphenyl phosphonium bromide, to construct an electrostatic shell outside the dots. Such electrostatic shell could highly improve carbon dots stability in an aqueous solution to make CDs-P(Ph)3 stable for long-term storage with negligible aggregation. Meanwhile, the sensitivity of CDs-P(Ph)3 for hypochlorous acid (HClO) was also enhanced on the basis of the electron-withdrawing effect of cationic substituents on the surface of carbon dots. The limit of detection of CDs-P(Ph)3 for HClO was as low as ∼0.32 μM. Additionally, the fluorescence of CDs-P(Ph)3 could be rapid quenched by HClO with a quenching efficiency of more than 80% within 30 s. The excellent stability of CDs-P(Ph)3 in an aqueous solution made it suitable for on-site detecting HClO in real samples, such as tap, well and lake water. Such designed fluorescent nanomaterial would provide a practical application pathway for optical sensing detection in environmental samples.

Efficient Adsorptive Removal of Methylene Blue Dye from Aqueous Solution Using Eragrostis Teff Biomass-Derived Nitrogen and Phosphorus-Codoped Carbon Quantum Dots

Carbon quantum dots have a great application potential in environmental protection via adsorption technology due to their large specific surface area and negative zeta potential. In this work, nitrogen and phosphorus-codoped carbon quantum dots (NP-CQDs) with a large specific surface area and negative zeta potential were successfully synthesized by a single-step hydrothermal synthesis. Batch adsorption studies were utilized to assess the adsorbent's capacity to remove common methylene blue (MB) dye contaminants from an aqueous solution. The experiment showed that MB dye could be removed in 30 min under optimum experimental conditions, with a removal efficiency of 93.73%. The adsorbent's large surface area of 526.063 m2/g and negative zeta potential of -12.3 mV contribute to the high removal efficiency. The Freundlich isotherm model fits the adsorption process well at 298 K, with R2 and n values of 0.99678 and 4.564, respectively, indicating its applicability. A kinetic study demonstrated that the pseudo-second-order model, rather than the pseudo-first-order model, is more suited to represent the process of MB dye adsorption onto NP-CQDs. This research established a simple and cost-effective method for developing a highly efficient NP-CQD adsorbent for organic dye degradation by adsorption.

Influencing mechanisms of tartaric acid on adsorption and degradation of tetracycline on goethite: insight from solid and liquid aspects

The interactions between organic pollutants and iron minerals play an important role in their environmental fate. In this study, the effects of low-molecular-weight organic acids (LMWOAs) on the adsorption and degradation of tetracycline (TC) on goethite were investigated. Tartaric acid (TA) was taken as the representative of LMWOAs to study the influencing mechanism through batch experiments and microscale characterization. In addition, the properties of TC-TA clusters under different pHs were determined by density functional theory (DFT) calculations. The results showed that all five LMWOAs inhibited TC adsorption and degradation. The preferential adsorption of TA on goethite changed TC adsorption from inner spherical to outer spherical complexation and mainly inhibited TC adsorption and degradation of the singly coordinated hydroxyl group. TC degradation rate decreased from 0.0287 to 0 h-1 in the first stage. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy results showed that TA could influence the interactions of amide groups, C = O on the A-ring, and dimethylamino group of TC with goethite, and the formation of ≡Fe(II) was inhibited. In addition to competing for the effective sites, the effects of complexation between TA and TC in solution should be considered. According to DFT calculations, hydrogen bonds could be formed between the carboxyl group of TA and the H atom of TC at different pH. These findings can provide evidence for estimating the contribution of adsorption and degradation to TC removal by iron oxides with the coexistence of LMWOAs in a soil-water environment.

Red Emission Carbon Nanoparticles Which Can Simultaneously Responding to Hypochlorite and pH

Multi-targets detection has obtained much attention because this sensing mode can realize the detection of multi-targets simultaneously, which is helpful for biomedical analysis. Carbon nanoparticles have attracted extensive attention due to their superior optical and chemical properties, but there are few reports about red emission carbon nanoparticles for simultaneous detection of multi-targets. In this paper, a red emission fluorescent carbon nanoparticles were prepared by 1, 2, 4-triaminobenzene dihydrochloride at room temperature. The as-prepared red emission fluorescent carbon nanoparticles exhibited strong emission peak located at 635 nm with an absolute quantum yield up to 24%. They showed excellent solubility, high photostability and good biocompatibility. Furthermore, it could sensitively and selectively response to hypochlorite and pH, thus simultaneous detection of hypochlorite and pH was achieved by combining the red emission fluorescent carbon nanoparticles with computational chemistry. The formation mechanisms of red emission fluorescent carbon nanoparticles and their response to hypochlorite and pH were investigated, respectively.

Acylhydrazone functionalized naphthalene-based self-assembled supramolecular gels for efficient fluorescence detection of Fe3

A new gel factor (named N) has been successfully designed and synthesized, which contains the conventional fluorophore naphthalene with the acylhydrazone bond as the self-assembly site. It can be self-assembled into stable organogels (named ON) in dimethyl sulfoxide (DMSO) and water mixed medium (V : V = 4 : 1) with a critical gel temperature and concentration (55 °C and 10 mg mL-1). Interestingly, under 365 nm UV light, the ON exhibits bright yellow Aggregation Induced Emission (AIE). The supramolecular organogel ON shows a fluorescent "OFF" response to the metal ions Fe3+, and the state of the gel ON remains constant before and after detection. Notably, the minimum detection limits (LODs) of the gel ON for Fe3+ are as low as 1.30 × 10-7 M. The binding mechanism of supramolecular organogels (ON) to ions has been investigated through a series of characterizations. Meanwhile, the organogel sensor ON can also be used as an ion-responsive membrane for the detection of Fe3+ in the aqueous phase.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

On-line monitoring of a recirculating-flow fluorescent capillary system for exploring the interaction mechanism of carbon dots/metal ions

The interaction mechanism between carbon dots (CDs) and metal ions is essential for optimizing their design, synthesis, and application. However, it must be accurately distinguished and quantified because of CDs' complex structure, composition, and coexisting various response mechanisms or products. Herein, a recirculating-flow fluorescence capillary analysis (RF-FCA) system was developed to online monitor the fluorescence kinetics of CDs interacting with metal ions. The fluorescence kinetics of purification and dissociation of CDs/metal ion complexes were easy to monitor online by integrating immobilized CDs and RF-FCA. Here, CDs derived from citric acid and ethylenediamine were used as a model system. We found that the fluorescence of CDs is quenched by Cu(II) and Hg(II) only through the formation of a coordination complex, by Cr(VI) only through the inner filtering effect, and by Fe(III) through the above two mechanisms. Then the kinetics of the competitive interaction between metal ions were used to address the difference of binding sites on CDs with metal ions, wherein Hg(II) was bound to other sites of CDs besides the same sites of CDs with Fe(III) and Cu(II). Finally, from the fluorescence kinetics of fluorescent molecules in the CD structure with metal ions, the difference was due to the presence of two fluorescent centers in the carbon core and molecular state in the CDs. Therefore, the RF-FCA system can distinguish and quantify the interaction mechanism between metal ions and CDs effectively and accurately and be a potential detection or performance characterization method.

Yellow emissive nitrogen-doped carbon dots as a fluorescence probe for the sensitive and selective detection of silver ions

In this work, yellow emissive carbon dots (Y-CDs) were prepared via a simple hydrothermal method using catechol and hydrazine hydrate as the carbon and nitrogen sources, respectively. The average particle size was 2.99 nm. The Y-CDs demonstrate excitation-dependent emission properties, and the maximum emission wavelength is 570 nm at E x = 420 nm. The fluorescence quantum yield is calculated to be 28.2%. Ag+ could quench the fluorescence of Y-CDs with high selectivity. The quenching mechanism was further explored by various characterization techniques. A sensitive fluorescent probe for Ag+ detection was established based on Y-CDs with a linear range of 3-300 μM. The detection limit was calculated to be 1.1 μM. The proposed method shows satisfactory results in real water samples without interference by coexistence.

Developing Carbon Dots with Room-Temperature Phosphorescence for the Dual-Signal Detection of Metronidazole

Room-temperature phosphorescent carbon dots (CDs) show the advanced property owing to their dual signal; howbeit, acquiring the efficient phosphorescence of CDs is still challengeable. Here, we proposed one type of CD doped with nitrogen through the microwave method, which exhibited the obvious blue fluorescence in aqueous solution and green phosphorescence immobilized on filter paper, while diethylenetriamine pentamethylene phosphonic acid provided the source of carbon and nitrogen. Importantly, introducing metronidazole (MNZ) into the CDs leads to their simultaneous decrease in both fluorescence and phosphorescence, and thus, we successfully established a dual-signal strategy for detecting MNZ. Likewise, this fluorescent detection showed the linear range of 2-200 μM and the phosphorescent way of 50-2000 μM. Meanwhile, the corresponding detection mechanism was also explored, and both the quenched fluorescence and phosphorescence of CDs were mainly due to the occurrence of the electron transfer and internal filtration effect between CDs and MNZ. Additionally, we employed these CDs as the fluorescent and phosphorescent inks for painting and information encryption.

Construction of an ultra-small hydrazone-linked covalent organic polymer for selective fluorescent detection of ferric ion in aqueous solution

A novel ultra-small hydrazone-linked covalent organic polymer (UHCOP) was synthesized based on the Schiff-base reaction between 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and 1,4-benzenedicarbohydrazide at room temperature and utilized as a sensitive fluorescent sensor for rapid (<2 min) and selective detection of Fe³⁺ in aqueous solution. The prepared UHCOP displayed ultra-small size with the diameter of 7.98 ± 0.97 nm and gave a stable fluorescent emission at 510 nm. UHCOP exhibited good sensitivity and highly selectivity towards Fe³⁺. The coordination interaction between UHCOP and Fe³⁺ resulted in the obviously aggregation-caused quenching response of UHCOP. The linear range was from 5.0 μM to 1.4 mM (R² = 0.999) with the detection limit of 2.5 μM. Finally, UHCOP has been successfully applied in the detection of Fe³⁺ in real water samples, proving the fabricated UHCOP is promising as a sensitive fluorescent sensor for selective detection of Fe³⁺ in aqueous solution.

Orange-fluorescence carbon dots employed for the quantitative analysis of silver ions and glyphosine through the off-on mode

Here we successfully developed a kind of carbon dot (CD), which emitted obvious orange-fluorescence, based on the hydrothermal method while polyacrylic acid was employed as the carbon source. The developed CDs have been equipped with multiple functional groups such as CO, -OH and -COOH, facilitating the possibility of interacting with potential targets. Meaningfully, the introduction of silver ions induced the fluorescence quenching of the as-prepared CDs. Meanwhile, the proposed CDs achieved detection of Ag⁺ with a linear range of 2.0 × 10^-6 to 1.0 × 10^-3 M at a detection limit of 1.8 × 10^-6 M. Moreover, the further addition of glyphosine gradually recovered the fluorescence accompanied by the concentration of glyphosine varying from 7 × 10^-6 to 10^-2 M with a detection limit of 6.2 × 10^-6 M. Thereby, the CDs prepared here show potential for broadening the avenues for detecting Ag⁺ and glyphosine.

Nanoarchitectonics of neomycin-derived fluorescent carbon dots for selective detection of Fe3+ ions

The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized via a low-cost, eco-friendly, and single-step hydrothermal method using neomycin as a single precursor. The as-prepared Neo-CDs exhibited strong and stable blue fluorescence and were well characterized by TEM, UV-vis absorption, fluorescence emission, IR, XRD, Raman and XPS spectroscopy methods. The Neo-CDs showed a well-distributed size within the range of 4.5 to 7.8 nm, comprising various functional groups on the surface of the carbon core. The Neo-CDs exhibited exceptional emission behaviour, and fluorescence quantum yield was calculated to be 55% in double distilled water. Neo-CDs have been used as a fluorescent sensor for selective and sensitive detection of Fe³⁺ ions in aqueous solution in the fluorescence turn-off mode. From the set of metal ions, only the Fe³⁺ ion showed quenching of fluorescence due to photoinduced (PET) electron transfer from Neo-CDs to the half-filled 3d orbital of Fe³⁺ ions. The limit of detection for Fe³⁺ ions was calculated to be 0.854 μM. Further, the quenching efficiency and Stern-Volmer quenching constant have been calculated which are about 94% and 5.6 × 10⁶ M^-1, respectively.

Highly Luminescent Nucleoside-Based N, P-Doped Carbon Dots for Sensitive Detection of Ions and Bioimaging

The efficient detection of Fe3+ and MnO4− in a water environment is very important and challenging due to their harmful effects on the health of humanity and environmental systems. Good biocompatibility, sensitivity, selectivity, and superior photophysical properties were important attributes of carbon dot-based CDs sensors for sensing applications. In this work, we synthesized N, P-co-doped carbon dots (N/P CDs) with guanosine 5′-monophosphate (GMP) as a green carbon source, with high fluorescence quantum yield in water (QY, 53.72%). First, the luminescent N/P CDs showed a three-state “on-off-on” fluorescence response upon the sequential addition of Fe3+ and F−, with a low detection limit of 12 nM for Fe3+ and 8.5 nM for F−, respectively. Second, the N/P CDs also exhibited desirable selectivity and sensitivity for toxic MnO4− detection with the limit of detection of 18.2 nM, through a turn-off mechanism. Moreover, the luminescent N/P CDs successfully monitored the aforementioned ions in environmental water samples and in Escherichia coli.

Visual Monitoring of Nucleic Acid Dynamic Structures during Cellular Ferroptosis Using Rationally Designed Carbon Dots with Robust Anti-Interference Ability to Reactive Oxygen Species

Ferroptosis triggered by an iron-dependent accumulation of lipid reactive oxygen species (ROS) has drawn widespread attention. Directly visualizing the dynamic structures of nucleic acids during the ferroptosis of cells is of great importance considering their vital roles in numerous biological functions. However, direct imaging remains challenging, largely due to the extremely high concentrations of ROS generated during ferroptosis, which can affect the imaging of nucleic acid targeted fluorescent probes. To overcome this challenge, nucleic acid-responsive carbon dots (CDs) providing favorable optical properties together with high chemical stability were synthesized. Furthermore, the CDs penetrated the cell membrane quickly and accumulated in the nuclei of cells. The robust anti-interference ability to ROS allows the CDs to visualize the dynamic structures of nucleic acids during ferroptosis. Moreover, the CDs were successfully employed in the imaging of nucleic acids during cell division. The nuclei-targeting CDs show great potential as a powerful tool for imaging nuclei in ferroptosis-related biological and clinical research.

Tunable multimodal printable up-/down-conversion nanomaterials for gradient information encryption

Phosphor-based security techniques have received widespread attention because they can rely on fascinating optical properties (including multicolor emission and various luminous categories) to meet information protection requirements. Carbon dots (CDs) with multicolor fluorescence (FL) and room-temperature phosphorescence (RTP) show enormous potential in advanced information encryption, yet the achievement of tunable multimodal printable CDs confronts numerous challenges. Herein, liquid CDs with color-tunable properties ranging from blue to red are obtained, and the decay time-tunable RTPs of powdered CDs are achieved with a post-treatment of urea in an o-phenylenediamine/H₂O/H₃PO₄ system. Based on various security inks, anti-counterfeiting patterns with multilevel security strength are produced through screen printing technology. Color-tunable security patterns are obtained based on different security inks containing multicolor liquid CDs. The security strength can be boosted by combining the color-tunable properties and dual-mode luminescence of FL and RTP. Furthermore, higher-level anti-counterfeiting is achieved by introducing near-infrared induced upconversion luminescence phosphors into CDs systems. The excellent security performance of gradient information encryption shows that the proposed strategy establishes superior coding capacity for advanced information encryption and provides a good reference for cutting-edge research.

Polymer Carbon Nanodots: A Novel Electrochemiluminophore for Dual Mode Detection of Ferric Ions

The development of simple and effective dual-mode analytical methods plays crucial regulatory roles in the discrimination of relevant target species, because of their built-in cross reference correction and high accuracy. In this work, a novel polymer carbon nanodots (PCNDs) prepared from a facile one-pot hydrothermal procedure using readily available l-tryptophan and l-phenylalanine as precursors, showed excellent aqueous solubility and blue fluorescence property with a high quantum yield of 29%. Moreover, the PCNDs was demonstrated to be a robust luminophore with electrochemiluminescence (ECL) efficiency of 43% was achieved by using K₂S₂O₈ as a coreactant. The spooling ECL spectroscopy was employed to take insight into excited states responsible for the potential-dependent ECL emissions. Most importantly, when introduced into construction of the fluorescence and ECL dual mode sensing platform, for the first time, the PCNDs displayed prominent performance for the detection of ferric ions (Fe³⁺). The ferric ions could be quantified ranging from micromolar to millimolar with a detection limit of 0.22 and 5.3 μM, respectively. Such a dual-functional sensing platform also exhibits excellent selectivity, reproducibility and stability. Results from this work indicate that PCNDs showing great promise as a bright luminophore for the fabrication of low-cost, high-performance dual-signal readout platforms for ferric ions determination.

Broadened optical absorption, enhanced photoelectric conversion and ultrafast carrier dynamics of N, P co-doped carbon dots

Carbon dots (CDs) have attracted extensive attention for their unique properties and promising applications in many fields. Many efforts have been made to improve the optical and physicochemical properties of CDs using an atomic doping strategy; however, the photoelectric properties of CD-based devices have been less studied and the photocurrent density is far from satisfactory for practical operation. Deep understanding of the doping effects on the electronic structure and photophysical properties of CDs is fundamental and essential for effectively improving the optical and photoelectrical performance of CD-based devices. Here, we have synthesized nitrogen (N) and phosphorus (P) co-doped CDs (N, P-CDs) through a one-step hydrothermal approach, and systematically investigated the effects of P-dopants on the improved optical and photoelectric properties of N, P-CDs. The introduction of P atoms into N-CDs significantly changes the electronic structure and extends the absorption spectral region, enhancing the light-harvesting ability of N, P-CDs. Meanwhile, the regulated carrier dynamics have been investigated using time-resolved fluorescence and transient absorption spectroscopy. We found that the carrier recombination was decreased with introducing P atoms, and the photogenerated electrons in the higher excited states could be efficiently transferred to the lowest excited state. Moreover, the photocurrent density of N, P-CDs was increased by twelve times compared with that of N-CDs. Therefore, the effective doping of P atoms can significantly regulate the electronic structure, optical properties, carrier dynamics and photoelectric conversion of N, P-CDs. The achieved broadband light-harvesting, good photoelectric properties and photostability of the as-prepared N, P-CDs demonstrate an important example of P-doping to improve the optical and photoelectrical properties of CD-based devices.

Recent Progress in Fluorescent Probes For Metal Ion Detection

All forms of life have absolute request for metal elements, because metal elements are instrumental in various fundamental processes. Fluorescent probes have been widely used due to their ease of operation, good selectivity, high spatial and temporal resolution, and high sensitivity. In this paper, the research progress of various metal ion (Fe³⁺,Fe²⁺,Cu²⁺,Zn²⁺,Hg²⁺,Pb²⁺,Cd²⁺) fluorescent probes in recent years has been reviewed, and the fluorescence probes prepared with different structures and materials in different environments are introduced. It is of great significance to improve the sensing performance on metal ions. This research has a wide prospect in the application fields of fluorescence sensing, quantitative analysis, biomedicine and so on. This paper discusses about the development and applications of metal fluorescent probes in future.

Synthesis of BINOL-xylose-conjugates as "Turn-off" fluorescent receptors for Fe3+ and secondary recognition of cysteine by their complexes

A novel chiral fluorescence "turn-off" sensor was synthesised using the click reaction. The sensor was a BINOL-xylose derivative, modified at the 2-position and linked by 1,2,3-triazole. It was structurally characterized by ¹HNMR, ¹³CNMR, ESI-MS and IR analysis. The selectivity of R-β-d-2 in methanol solution has been studied. Among the 19 transition metal ions, alkaline metal ions and alkaline earth metal ions studied, R-β-d-2 had a selective fluorescence quenching reaction for Fe³⁺. The detection limit of R-β-d-2 for Fe³⁺ was 0.91 μmol L^-1. Complexation between R-β-d-2 and Fe³⁺ was investigated by ESI-MS and ¹HNMR. The stoichiometric ratio of R-β-d-2 was 1 : 1. In addition, the R-β-d-2-Fe³⁺ complex was titrated with 20 naturally occurring amino acids and Hcy with GSH. It was found that the complex R-β-d-2-Fe³⁺ had a secondary recognition effect on Cys by switching to fluorescence.

Mechanistic insights into the environmental fate of tetracycline affected by ferrihydrite: Adsorption versus degradation

Tetracycline (TC), a widely used antibiotic, is frequently detected in soil environments. It has a strong tendency to form complexes with metals, including iron (oxyhydr)oxide. In this study, ferrihydrite (Fh), a representative iron oxyhydroxide of the iron plaques on the surface of plant roots, was chosen to study the contributions of iron oxyhydroxide on the environmental fate of TC in the rhizosphere environment. Fh adsorption isotherm of TC showed good fitting to the Freundlich model, and the Fh adsorption capacity of TC was found much larger than the other iron oxyhydroxide of high crystallinity. The adsorption mechanisms mainly included electrostatic interaction, H-bonding, and complexation. The results of FTIR and XPS spectra revealed that tricarbonylamide, dimethylamino, and the hydroxyl in the B ring of TC were mainly responsible for the complexation with Fh surface hydroxyl groups. Furthermore, it should be noted that the adsorbed TC on Fh could be degraded and the degradation kinetics of TC better fitted to the pseudo-second-order model. Fh could promote electron transfer from TC to Fe(III) on the Fh surface, which led to the degradation of TC and the formation of Fe(II) ions. The degradation pathways of TC mainly involved three reactions: hydroxylation, dealkylation, and deamination. This study provides mechanistic insights on TC-Fh interaction, which improves the understanding of TC fate in the rhizosphere environment.

Facile Synthesis of Water-Soluble Rhodamine-Based Polymeric Chemosensors via Schiff Base Reaction for Fe3+ Detection and Living Cell Imaging

Quantitative and accurate determination of iron ions play a vital role in maintaining environment and human health, but very few polymeric chemosensors were available for the detection of Fe³⁺ in aqueous solutions. Herein, a water-soluble rhodamine-poly (ethylene glycol) conjugate (DRF-PEG), as a dual responsive colorimetric and fluorescent polymeric sensor for Fe³⁺ detection with high biocompatibility, was first synthesized through Schiff base reaction between rhodamine 6G hydrazide and benzaldehyde-functionalized polyethylene glycol. As expected, the introduction of PEG segment in DRF-PEG significantly improved the water solubility of rhodamine derivatives and resulted in a good biosensing performance. The detection limit of DRF-PEG for Fe³⁺ in pure water is 1.00 μM as a fluorescent sensor and 3.16 μM as a colorimetric sensor at pH 6.5. The specific sensing mechanism of DRF-PEG toward Fe³⁺ is proposed based on the intramolecular charge transfer (ICT) mechanism, in which the O and N atoms in rhodamine moiety, together with the benzene groups from benzaldehyde-modified PEG segment, participate in coordination with Fe³⁺. Furthermore, DRF-PEG was applied for the ratiometric imaging of Fe³⁺ in HeLa cells and showed the potential for quantitative determination of Fe³⁺ in fetal bovine serum samples. This work provides insights for the design of water-soluble chemosensors, which can be implemented in iron-related biological sensing and clinical diagnosis.

Decagram-Scale Synthesis of Multicolor Carbon Nanodots: Self-Tracking Nanoheaters with Inherent and Selective Anticancer Properties

Carbon nanodots (CDs) are a new class of carbon-based nanoparticles endowed with photoluminescence, high specific surface area, and good photothermal conversion, which have spearheaded many breakthroughs in medicine, especially in drug delivery and cancer theranostics. However, the tight control of their structural, optical, and biological properties and the synthesis scale-up have been very difficult so far. Here, we report for the first time an efficient protocol for the one-step synthesis of decagram-scale quantities of N,S-doped CDs with a narrow size distribution, along with a single nanostructure multicolor emission, high near-infrared (NIR) photothermal conversion efficiency, and selective reactive oxygen species (ROS) production in cancer cells. This allows achieving targeted and multimodal cytotoxic effects (i.e., photothermal and oxidative stresses) in cancer cells by applying biocompatible NIR laser sources that can be remotely controlled under the guidance of fluorescence imaging. Hence, our findings open up a range of possibilities for real-world biomedical applications, among which is cancer theranostics. In this work, indocyanine green is used as a bidentate SO_x donor which has the ability to tune surface groups and emission bands of CDs obtained by solvothermal decomposition of citric acid and urea in N,N-dimethylformamide. The co-doping implies various surface states providing transitions in the visible region, thus eliciting a tunable multicolor emission from blue to red and excellent photothermal efficiency in the NIR region useful in bioimaging applications and image-guided anticancer phototherapy. The fluorescence self-tracking capability of SO_x-CDs reveals that they can enter cancer cells more quickly than healthy cell lines and undergo a different intracellular fate after cell internalization. This could explain why sulfur doping entails pro-oxidative activities by triggering more ROS generation in cancer cells when compared to healthy cell lines. We also find that oxidative stress can be locally enhanced under the effects of a NIR laser at moderate power density (2.5 W cm^-2). Overall, these findings suggest that SO_x-CDs are endowed with inherent drug-independent cytotoxic effects toward cancer cells, which would be selectively enhanced by external NIR light irradiation and helpful in precision anticancer approaches. Also, this work opens a debate on the role of CD surface engineering in determining nanotoxicity as a function of cell metabolism, thus allowing a rational design of next-generation nanomaterials with targeted anticancer properties.

Multifunctional carbon quantum dots as a theranostic nanomedicine for fluorescence imaging-guided glutathione depletion to improve chemodynamic therapy

To minimize unwanted reactions with high concentrations of reduced glutathione (GSH) in the tumor microenvironment (TME) during chemodynamic therapy (CDT), a simple and effective strategy was developed to fabricate a TME stimuli-responsive theranostic nanomedicine (Fe-CD) for fluorescence imaging-guided GSH depletion and cancer therapy by combining fluorescent imaging carbon dots (CD) and Fe(III). Introducing Fe(III) into Fe-CD not only quenched the fluorescence of CD while reacting with and consuming intracellular GSH for fluorescence imaging of the depletion of GSH but also provided a source of metal ions to generate more abundant hydroxyl radicals (•OH) with hydrogen peroxide (H₂O₂) through the Fenton reaction to improve CDT. Fe-CD showed promising •OH generation under H₂O₂ to effectively degrade methylene blue in vitro and obviously activate the green fluorescence of the reactive oxygen species (ROS) probe in cells. Benefiting from the fluorescence enhancement in response to TME stimulation, Fe-CD greatly enhanced CDT cytotoxicity while monitoring successful GSH depletion by fluorescence imaging. Fe-CD has the potential to act as a theranostic nanomedicine for fluorescence imaging-guided GSH depletion to amplify CDT.

Facile and green synthesis of carbon nanodots from environmental pollutants for cell imaging and Fe3+ detection

An economical and green approach has been provided to turn environmental pollutants into carbon nanodots for their potential applications in both bioimaging and Fe3+ detection.

Improved photocatalytic activity of TiO2 nanoparticles through nitrogen and phosphorus co-doped carbon quantum dots: An experimental and theoretical study

In this work, we are developing a photocatalyst wherein, nitrogen and phosphorus co-doped carbon quantum dots are scaffolded on to TiO2 nanoparticles (NPCQDs/TiO2), denoted NPCT hereafter. The NPCT photocatalyst developed...

Enhanced antibacterial activity with increasing P doping ratio in CQDs

It is an urgent challenge to develop efficient antibacterial agents against resistant bacteria in the treatment of infectious diseases. Carbon quantum dots (CQDs) have attracted much attention owing to their good stability, low toxicity and excellent biocompatibility. In this work, CQDs doped with different contents of the element phosphorus (P) were prepared by a simple hydrothermal method using valine as a carbon source, triethylamine as a nitrogen source and different volumes of phosphoric acid as a phosphorus source. The average diameter and the surface charge could be regulated from 2.89 nm to 1.56 nm and +2.58 mV to +5.47 mV by increasing the content of the element P in these CQDs. Importantly, these CQDs showed effective bacterial inhibition against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The minimal inhibitory concentration (MIC) decreased from 0.71, to 0.51 to 0.18 mg mL⁻¹ on E. coli and S. aureus with the increase of P element content. Furthermore, the morphologies of E. coli cells and S. aureus were damaged and became irregular upon treatment with these CQDs. The results of singlet oxygen (¹O₂) detection demonstrated that intracellular ¹O₂ was generated during the antibacterial process. We speculated that bacterial inhibition induced by these CQDs was accompanied by disruption of permeability and structural integrity, owing to strong electrostatic interactions between negatively charged bacteria and positively charged CQDs and production of singlet oxygen of CQDs. Together, this study indicates that the CQDs can be a candidate to treat resistant bacterial infections and may improve the understanding of killing pathogens by antibacterial CQD drugs.

The preparation of CQDs and their antibacterial effects.

The diversity of the coordination bond generated a POSS-based fluorescent probe for the reversible detection of Cu(II), Fe(III) and amino acids

In recent years, it has been found that Cu²⁺, Fe³⁺, and amino acids play an irreplaceable and subtle role in organisms and have attracted the considerable attention of many researchers. Therefore, it is vital to design visual indicators to reveal the relationships between metal ions and amino acids. However, there have been few reports on this vigorous subject. Fortunately, based on the different coordination effects between metal ions and boron groups, we have designed an accessible fluorescent probe (PSI-A). Borane was introduced as an ion-sensitive group to form a novel POSS-based fluorescent probe, which achieves fascinating performance, in situ dynamic multiple detection, excellent photostability, and enervative biological toxicity. PSI-A exhibited predominant selectivity and sensitivity to Cu²⁺/amino acids and Fe³⁺/amino acids sequence reactions in HepG2 cells and zebrafish. The fluorescence of PSI-A was quenched by Cu²⁺, which can be recovered by adding Asp, Ser, Arg, Ace or Trp. Additionally, the fluorescence of PSI-A quenched by Fe³⁺ can be restored after adding Asp. PSI-A is available to monitor Cu²⁺/amino acids and Fe³⁺/amino acids sequence reactions and can be repeated for at least three consecutive cycles without a fatigued performance. Therefore, this multifunctional fluorescent probe may have prospective application potentials in the biological field.

Employing metformin-directed carbon dots with room-temperature phosphorescent towards the dual-channel detection of L-tryptophan

Currently, carbon dots (CDs) with the eminent phosphorescence have been extensively concerned owing to their more widespread applications. Herein, we employed metformin as the carbon source and successfully synthesized one kind of room-temperature phosphorescence (RTP) CDs doped with the elements of N, P through a facile microwave method. Significantly, the RTP emission of CDs appeared while the solution was fixed on the filter paper. To be specific, the hydrogen bonds formed between CDs and the filter paper, which led to the restriction of molecular rotations and motions. Again, the non-radiation attenuation rate of the excited triplet state was reduced by rigidifying the whole system, thus inhibiting the non-radiative transitions and boosting their RTP emission CDs. Interestingly, the proposed CDs could serve as the RTP ink and was applied to paint various patterns and prepare CDs-PVA film with both fluorescence and phosphorescence. Moreover, both their fluorescence and phosphorescence of these CDs was obviously enhanced by introducing L-tryptophan, thus establishing an innovative dual-channel detection of L-trp. Besides, the detection mechanism was also explored, and the increased hydroxyl-groups enhanced their fluorescence of CDs through the radiative recombination by L-trp, while the phosphorescence was enhanced by the narrowed the energy gap (∆E_ST), thus promoting the singlet-to-triplet intersystem crossing (ISC).

Synthesis of high luminescent Eu3+ doped nanoparticle and its application as highly sensitive and selective detection of Fe3+ in real water and human blood serum

The present work reports a highly efficient Ca doped Eu: Y₂O₃ i.e Ca_0.05Eu_0.01Y_1.94O₃ (CEY.) nanophosphor material synthesized through a facile combustion method, as a simple and selective turn-off fluorescence probe for the quantitative analysis of iron ions (Fe³⁺). The proposed sensor allows the quantification of iron in the range of 10 µM-90 µM with a limit of detection (LOD) ∼ 63.2 nM under the natural pH range. Moreover, CEY nanophosphor shows an excellent fluorescence phenomenon with a gradual increase in the Fe³⁺ ion concentration. It has been observed that the corresponding PL intensity gets completely quenched with 500 µM Fe³⁺ ion concentration. Furthermore, the applicability of the sensor as an efficient probe has been investigated with real water samples, iron tablets, and human blood serum (HBS). The selectivity of the probe has also been analyzed with various metal ions and biomolecules. Thus, in turn, the as-obtained sensing probe illustrates an excellent accuracy, sensitivity, and selectivity, and offers potential application in clinical diagnosis, biological and real water sample studies, with the detection of Fe³⁺ ion. Furthermore, it does not require any acidic medium for a level-free, and non-enzymic detection of a real sample with almost not affecting the sample quality and henceforth provides more reliable results.

Red-emissive carbon nanodots for highly sensitive ferric(III) ion sensing and intracellular imaging

Ferric(III) ions (Fe³⁺) are one of the most abundant metal ions in environmental and biological systems. The determination of Fe³⁺ has attracted great attention for healthcare concerns. In this work, we have developed a novel fluorescence method for the sensing and intracellular imaging of Fe³⁺ based on the prepared red-emissive carbon nanodots. The nanoprobes are synthesized via a microwave method using ammonium fluoride and o-phenylenediamine as carbon precursors, which exhibit excellent optical properties and low toxicity. More importantly, the carbon nanodots show high selectivity towards Fe³⁺ against other interfering ions. The sensitivity is also high with the limit of detection as low as 0.05 μM. Meanwhile, the carbon nanodots have been successfully used for fluorescence imaging of cells and could be quenched by intracellular Fe³⁺. These results suggest that the red-emissive carbon nanodots have diverse potential utilities in biomedical fields.

Multifunctional room-temperature phosphorescent carbon dots for relative humidity determination and information encryption

The relative humidity (RH) determination is crucial in many fields. Based on the phosphorescent properties of room-temperature phosphorescent (RTP) carbon dots, the RTP carbon dots as a probe are expected to be used to rapidly detect relative humidity. In this study, matrix-free room-temperature phosphorescent N-doped carbon dots (N-CDs) were successfully prepared from urea, succinic acid, and acrylamide using a hydrothermal method. The as-synthesized N-CDs had good biocompatibility and water solubility. The N-CDs emitted blue fluorescence and green phosphorescence. Moreover, the N-CD powder exhibited stable phosphorescence with a phosphorescence lifetime of 158 ms (afterglow time to the naked eye for ~7 s). Because H₂O molecules affected the afterglow time, the as-prepared N-CD test paper for the first time could be applied as a probe to monitor RH, the afterglow time of the N-CD test paper is linearly related to the RH (y = -0.0729x+7.042, R² = 0.998) and the RH detection range is 0%-85%. And the results were consistent with those obtained using a hygrometer. In addition, the N-CD solution could also be used as an encryption ink in the advanced information security field.

Structure and Interface Modification of Carbon Dots for Electrochemical Energy Application

Carbon dots (CDs) as new nanomaterials have attracted much attention in recent years due to their unique characteristics. Notably, structure and interface modification (carbon core, edge, defects, and functional groups) of CDs have been considered as valid methods to regulate their properties, which contain electron transfer effect, electrochemical activity, fluorescence luminescent, and so on. Additionally, CDs with ultrasmall size, excellent dispersibility, high specific surface area, and abundant functional groups can guarantee positive and extraordinary effects in electrical energy storage and conversion. Therefore, CDs are used to couple with other materials by constructing a special interface structure to enhance their properties. Here, diverse structural and interfacial modifications of CDs with various heteroatoms and synergy effects are systematically analyzed. And not only several main syntheses of CDs-based composites (CDs/X) are summarized but also the merit and demerit of CDs/X in electrical energy storage are discussed. Finally, the applications of CDs/X in energy storage devices (supercapacitors, batteries) and electrocatalysts for practical applications are discussed. This review mainly provides a comprehensive summary and future prospect for synthesis, modification, and electrochemical applications of CDs.

Recent advances of nanomaterial-based optical sensor for the detection of benzimidazole fungicides in food: a review

The abuse of pesticides in agricultural land during pre- and post-harvest causes an increase of residue in agricultural products and pollution in the environment, which ultimately affects human health. Hence, it is crucially important to develop an effective detection method to quantify the trace amount of residue in food and water. However, with the rapid development of nanotechnology and considering the exclusive properties of nanomaterials, optical, and their integrated system have gained exclusive interest for accurately sensing of pesticides in food and agricultural samples to ensure food safety thanks to their unique benefit of high sensitivity, low detection limit, good selectivity and so on and making them a trending hotspot. This review focuses on recent progress in the past five years on nanomaterial-based optical, such as colorimetric, fluorescence, surface-enhanced Raman scattering (SERS), and their integrated system for the monitoring of benzimidazole fungicide (including, carbendazim, thiabendazole, and thiophanate-methyl) residue in food and water samples. This review firstly provides a brief introduction to mentioned techniques, detection mechanism, applied nanomaterials, label-free detection, target-specific detection, etc. then their specific application. Finally, challenges and perspectives in the respective field are discussed.

A signal-off fluorescent strategy for deferasirox effective detection using carbon dots as probe and Cu2+ as medium

The content of deferasirox (DEF) in plasma is significant in β-thalassemia patient that needs long-term transfusion therapy, while the effective and simple strategy for DEF monitoring is still limited. The carbon dots (CDs) prepared from citric acid monohydrate and glutathione exhibit weakly modulated fluorescence intensity to several common metal ions containing Cu²⁺. Interestingly, the process of interaction of Cu²⁺ and DEF forms the chelation of Cu²⁺ and DEF (Cu-DEF) with the absorbance wavelength of DEF at 320 nm shifting to 332 nm for Cu-DEF. And the obtained Cu-DEF will effectively quench CDs through inner filter effect (IFE). Accordingly, a facile signal-off fluorescent method based on CDs as probe is developed for DEF detection using Cu²⁺ as medium. And the proposed method exhibits linear range of 0.5-20 μg/mL with the detection limit of 0.33 μg/mL for DEF under the optimized conditions. Moreover, the developed assay is further expanded to test the content of DEF in dispersible tablet and plasma with accuracy and reproducibility. Such cost-effective and sensitive fluorescent assay just through simple mixing operation present a valuable strategy for drug monitoring.

Advances in the Methods for the Synthesis of Carbon Dots and Their Emerging Applications

Cutting-edge technologies are making inroads into new areas and this remarkable progress has been successfully influenced by the tiny level engineering of carbon dots technology, their synthesis advancement and impressive applications in the field of allied sciences. The advances of science and its conjugation with interdisciplinary fields emerged in carbon dots making, their controlled characterization and applications into faster, cheaper as well as more reliable products in various scientific domains. Thus, a new era in nanotechnology has developed into carbon dots technology. The understanding of the generation process, control on making processes and selected applications of carbon dots such as energy storage, environmental monitoring, catalysis, contaminates detections and complex environmental forensics, drug delivery, drug targeting and other biomedical applications, etc., are among the most promising applications of carbon dots and thus it is a prominent area of research today. In this regard, various types of carbon dot nanomaterials such as oxides, their composites and conjugations, etc., have been garnering significant attention due to their remarkable potential in this prominent area of energy, the environment and technology. Thus, the present paper highlights the role and importance of carbon dots, recent advancements in their synthesis methods, properties and emerging applications.

P-Doped Carbon Quantum Dots with Antibacterial Activity

It is a major challenge to effectively inhibit microbial pathogens in the treatment of infectious diseases. Research on the application of nanomaterials as antibacterial agents has evidenced their great potential for the remedy of infectious disease. Among these nanomaterials, carbon quantum dots (CQDs) have attracted much attention owing to their unique optical properties and high biosafety. In this work, P-doped CQDs were prepared by simple hydrothermal treatment of m-aminophenol and phosphoric acid with fluorescence emission at 501 nm when excited at 429 nm. The P-doped CQDs showed effective antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The minimal inhibitory concentrations (MICs) of P-doped CQD were 1.23 mg/mL for E. coli and 1.44 mg/mL for S. aureus. Furthermore, the morphologies of E. coli cells were damaged and S. aureus became irregular when treated with the P-doped CQDs. The results of zeta potential analysis demonstrated that the P-doped CQDs inhibit antibacterial activity and destroy the structure of bacteria by electronic interaction. In combination, the results of this study indicate that the as-prepared P-doped CQDs can be a promising candidate for the treatment of bacterial infections.