Generation of Small Single Domain Nanobody Binders for Sensitive Detection of Testosterone by Electrochemical Impedance Spectroscopy

Detection of testosterone based on the interaction between variable regions of antibody heavy chain and light chain

Introduction

Testosterone is a steroid hormone, which plays a pivotal role in regulating metabolism and protein synthesis in the body. The detection of testosterone is of paramount importance for diagnostic purposes in clinical settings, as well as for monitoring athletes' physiological parameters and ensuring the integrity of sports competitions.

Methods

Herein, we present a phage display-derived biosensing platform through genetic engineering of the TS77 antibody variable domains. The variable region genes of the heavy and light chains from TS77 antibody were cloned into the pDong1 plasmid and displayed on the phage surfaces through phage display technology. Subsequently, a novel non-competitive open-sandwich ELISA (OS-ELISA) was developed for testosterone detection, leveraging the antigen-induced interaction changes in antibody variable regions.

Results

OS-ELISA based on anti L-chain antibody achieved a limit of detection (LOD) of 2.71 nM and a half-maximal effective concentration (EC50) of 0.22 μM for testosterone detection. Furthermore, the enhanced OS-ELISA platform incorporating purified maltose binding protein fused with VL (MBP-VL) and VH phage demonstrated a LOD of 1.07 pM and a wide working range from 1 pM to 10 mM.

Discussion

The OS-ELISA developed in this study exhibits high sensitivity and a broad dynamic range for testosterone quantification, showing significant potential for clinical diagnostics and athlete monitoring applications.

Efficient development of nanobody-based affinity chromatography for AAV8 purification

Adeno-associated virus serotype 8 (AAV8) is a highly effective vector for gene therapy. However, its purification remains challenging due to its low natural abundance and stringent purity requirements. This study aimed to develop an affinity chromatography resin utilizing nanobodies (Nbs) to enhance AAV8 purification efficiency. An AAV8-specific Nb library was constructed, leading to the identification of Nb9 as the most promising candidate based on its high binding affinity, stability and yield. Nb9 was expressed in Pichia pastoris, resulting in high yield and exceptional purity. Two types of agarose resins, Epoxy activated Bestarose 6B and PabPur SulfoLink Beads 4FF, were employed for Nb9 conjugation. Epoxy activated Bestarose 6B resin exhibited a significantly higher ligand density (9.12 mg/mL). Binding capacity assessments of the LQ01 resin demonstrated optimal performance at pH 7.0, with diminishing efficacy at lower and higher pH levels. Different NaCl concentrations influenced the binding efficiency, providing critical insights for refining purification conditions. Purification trials exhibited high specificity, purity and consistent VP protein ratio, as evidenced by SDS-PAGE analysis, confirming effective AAV8 capture and elution. Furthermore, the resin demonstrated robust performance across repeated cycles, retaining 71.9 % of its initial binding capacity after 20 uses and maintaining stability with only a 6 % reduction after 7 days at 37 °C. These findings highlight LQ01's potential for scalable and cost-effective AAV8 purification, while demonstrating the broader applicability of Nbs in affinity chromatography and biotechnological processes.

Toward At-Home and Wearable Monitoring of Female Hormones: Emerging Nanotechnologies and Clinical Prospects

Steroid hormones, especially progesterone (P4), estradiol (E2), and testosterone (T), are key bioactive regulators in various female physiological processes, including growth and development, ovulation, and the reproductive cycle, as well as metabolism and mental health. As lipophilic molecules produced in sex glands, these steroid female hormones can be transported through blood vessels into various body fluids such as saliva, sweat, and urine. However, the ultralow concentration of steroid hormones down to picomolar (pM) level necessitates great demands for ultrasensitive but low-cost analytic tools to implement accurate, point-of-care or even continuous monitoring in a user-friendly fashion. This review focuses on the latest advances in materials and nanotechnologies to allow the rapid detection of female hormones at the pM level or below and the potentials in at-home and wearable hormone monitoring. We specifically summarize the optical and electrochemical strategies in this category, particularly those affording low cost and portable signal readout for at-home use. Furthermore, emerging flexible/wearable innovations are highlighted, which allow the continuous hormone cycle tracking in a noninvasive manner. The potential of these techniques is discussed to address the need for real-time acquisition of the hormone fluctuation, facilitating health monitoring at home. Lastly, we provide a comprehensive introduction to the prospects of female hormone monitoring in clinical diagnosis and treatment, from the perspective of gynecology and reproductive medicine clinicians.

Dual-readout immunosensor based on multifunctional MXene probe triggers the signal amplification for detection of autoimmune hepatitis marker

A dual-readout immunosensor coupled with electrochemical impedance and temperature signal was successfully proposed to detect autoimmune hepatitis markers (ASGPR). Nb₂C MXene with excellent conductivity, abundant surface functional groups, and extraordinary photothermal conversion efficiency, was designed to be a multifunctional biological probe, whose specific binding with antigen enhanced steric hindrance to generate electrochemical impedance signal, and at the same time, it had a strong optical response in the near-infrared band to achieve temperature output. In addition, poly(N-isopropyl acrylamide) (PNIPAM) was a temperature-sensitive polymer, which was adopted as the sensing matrix. When the multifunctional probe was specifically bound to the antigen, under 808-nm laser irradiation, the captured Nb₂C MXene achieved photothermal conversion to increase the electrode surface temperature, and the conformation of PNIPAM changed from a free spiral to a spherical shape, further realizing double amplification of the EIS signal. Under the optimized experimental conditions, the impedance values and the temperature changes increased proportionally with the increase of the ASGPR concentration from 10^-5 to 1 ng/mL, and the detection limit of the immunosensor was 3.3 × 10^-6 ng/mL. The established dual-readout immunosensor exhibited good selectivity and acceptable stability and provided an effective detection method for autoimmune hepatitis marker detection.

Highly sensitive detection of free testosterone assisted by magnetic nanobeads and gap-enhanced SERS nanotags

The quantitative determination of trace free testosterone (FT) is of great significance for the diagnosis of androgen-related endocrine diseases. Herein, a fascinating detection protocol was developed for highly sensitive FT analysis through a competitive immunoassay mechanism, which was composed of magnetic nanobeads (MNBs) and gap-enhanced surface enhanced Raman scattering (SERS) nanotags. With the MNBs as detection carriers, trace FT could be enriched by simple magnetic separation. The SERS nanotag constructed with silver-gold core-shell nanoparticle was acted as quantitative label, and Raman indicators were located at the interface between silver core and gold shell. It is demonstrated that the as-proposed protocol achieves high detection sensitivity for FT of 12.11 fg mL^-1, and wider linear dynamic detection range (LDR) in the concentration of 100 fg mL^-1 to 100 ng mL^-1 with R² value of 0.979, which is due to the enhanced Raman signal of the gap-enhanced SERS nanotag and the high surface-to-volume ratio of the MNB, respectively. Taking advantages of such sensitivity and accuracy approach, the as-developed powerful strategy presents potential applications for rapid disease diagnosis through analyzing trace levels of FT, and can also provide guidance for the exploitation of analysis project of other analytes.

An origami paper-based analytical device for rapid detection of testosterone in healthcare food

An integrated origami paper-based analytical device (oPAD) based on competitive enzyme-linked immunosorbent assay (ELISA) was developed for testosterone (TES) detection. In this design, a positive correlation between the signals and analytes was observed due to the connection of the reaction zone and signal readout zone by a "detachable bridge". The device displayed rapid (35 min), sensitive (LOD: 1 μg L^-1) and highly selective characteristics for TES detection. In addition, complex matrices in healthcare food such as oral solutions and tablets showed a negligible effect on the accuracy of this assay (recovery: 95.4-109.1% and RSD < 6%), demonstrating its potential for hazardous chemical testing in real samples.

Advances in the Determination of Anabolic-Androgenic Steroids: From Standard Practices to Tailor-Designed Multidisciplinary Approaches

Anabolic-androgenic steroids (AASs), a group of compounds frequently misused by athletes and, unfortunately, also by the general population, have lately attracted global attention; thus, significant demands for more precise, facile, and rapid AAS detection have arisen. The standard methods ordinarily used for AAS determination include liquid and gas chromatography coupled with mass spectrometry. However, good knowledge of steroid metabolism, pretreatment of samples (such as derivatization), and well-trained operators of the instruments are required, making this procedure expensive, complicated, and not routinely applicable. In the drive to meet current AAS detection demands, the scientific focus has shifted to developing novel, tailor-made approaches leading to time- and cost-effective, routine, and field-portable methods for AAS determination in various matrices, such as biological fluids, food supplements, meat, water, or other environmental components. Therefore, herein, we present a comprehensive review article covering recent advances in AAS determination, with a strong emphasis on the increasingly important role of chemically designed artificial sensors, biosensors, and antibody- and fluorescence-based methods.

Enhanced In Vitro Wound Healing Using PVA/B-PEI Nanofiber Mats: A Promising Wound Therapeutic Agent against ESKAPE and Opportunistic Pathogens

Opportunistic skin pathogens and their resistance to pre-existing therapeutics are a challenge to normal physiological wound healing processes. Consistent development of antimicrobial agents is required to overcome the complications raised by antimicrobial resistance. An effective alternative proposed in recent research includes the use of antimicrobial nanoparticles or nanobiopolymers. Unfortunately, metallic nanoparticles that have been proven as antimicrobial agents also possess a certain level of toxicity. In this work, we demonstrate the use of a cationic polymer, branched polyethyleneimine (B-PEI), that has been electrospun to obtain a scaffold/fiber (B-PEI NF) mat resulting in a large surface area-to-volume ratio. SEM analysis revealed that the average diameter of the obtained fibers is 240 nm. The formation of nanoscaffold modulates the controlled release of the polymer from the matrix resulting in long-term effects. The antimicrobial and antibiofilm activity of the B-PEI nanofiber (B-PEI NF) was evaluated against ESKAPE pathogens (Pseudomonas aeruginosa and Staphylococcus aureus) and also against Candida albicans. Dose-dependent inhibition was observed for microbial growth and biofilm for all three test organisms, the minimum inhibitory concentration required for inhibiting P. aeruginosa, S. aureus, and C. albicans is 33.125, 26.5, and 19.875 μM, respectively, in 2 mL of bacterial/fungal broth. Crystal violet and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays showed significant reduction in biomass and cell viability of sessile cells, respectively, within the biofilm after treatment using B-PEI NFs. A B-PEI NF matrix promotes cell migration and wound healing processes by mimicking the extracellular matrix. In vitro wound healing studies showed a fivefold increase in cell migration and wound healing by B-PEI NFs (97% wound coverage in 17 h) when compared to B-PEI (15% wound coverage in 17 h). The in vitro wound healing assays confirmed the biocompatibility and better wound healing activity of B-PEI NF mats.

Nanobody-based immunosensing methods for safeguarding public health

Immunosensing methods are biosensing techniques based on specific recognition of an antigen-antibody immunocomplex, which have become commonly used in safeguarding public health. Taking advantage of antibody-related biotechnological advances, the utilization of an antigen-binding fragment of a heavy-chain-only antibody termed as 'nanobody' holds significant biomedical potential. Compared with the conventional full-length antibody, a single-domain nanobody retaining cognate antigen specificity possesses remarkable physicochemical stability and structural adaptability, which enables a flexible and efficient molecular design of the immunosensing strategy. This minireview aims to summarize the recent progress in immunosensing methods using nanobody targeting tumor markers, environmental pollutants, and foodborne microbes.

A potent neutralizing nanobody against SARS-CoV-2 with inhaled delivery potential

The coronavirus disease 2019 (COVID‐19) pandemic has become a serious burden on global public health. Although therapeutic drugs against COVID‐19 have been used in many countries, their efficacy is still limited. We here reported nanobody (Nb) phage display libraries derived from four camels immunized with the SARS‐CoV‐2 spike receptor‐binding domain (RBD), from which 381 Nbs were identified to recognize SARS‐CoV‐2‐RBD. Furthermore, seven Nbs were shown to block interaction of human angiotensin‐converting enzyme 2 (ACE2) with SARS‐CoV‐2‐RBD variants and two Nbs blocked the interaction of human ACE2 with bat‐SL‐CoV‐WIV1‐RBD and SARS‐CoV‐1‐RBD. Among these candidates, Nb11‐59 exhibited the highest activity against authentic SARS‐CoV‐2 with 50% neutralizing dose (ND₅₀) of 0.55 μg/ml. Nb11‐59 can be produced on large scale in Pichia pastoris, with 20 g/L titer and 99.36% purity. It also showed good stability profile, and nebulization did not impact its stability. Overall, Nb11‐59 might be a promising prophylactic and therapeutic molecule against COVID‐19, especially through inhalation delivery.

Nanobodies targeting immune checkpoint molecules for tumor immunotherapy and immunoimaging (Review)

The immune checkpoint blockade is an effective strategy to enhance the anti-tumor T cell effector activity, thus becoming one of the most promising immunotherapeutic strategies in the history of cancer treatment. Several immune checkpoint inhibitor have been approved by the FDA, such as anti-CTLA-4, anti-PD-1, anti-PD-L1 monoclonal antibodies. Most tumor patients benefitted from these antibodies, but some of the patients did not respond to them. To increase the effectiveness of immunotherapy, including immune checkpoint blockade therapies, miniaturization of antibodies has been introduced. A single-domain antibody, also known as nanobody, is an attractive reagent for immunotherapy and immunoimaging thanks to its unique structural characteristic consisting of a variable region of a single heavy chain antibody. This structure confers to the nanobody a light molecular weight, making it smaller than conventional antibodies, although remaining able to bind to a specific antigen. Therefore, this review summarizes the production of nanobodies targeting immune checkpoint molecules and the application of nanobodies targeting immune checkpoint molecules in immunotherapy and immunoimaging.

A review on impedimetric immunosensors for pathogen and biomarker detection

Since the discovery of antibiotics in the first quarter of the twentieth century, their use has been the principal approach to treat bacterial infection. Modernized medicine such as cancer therapy, organ transplantation or advanced major surgeries require effective antibiotics to manage bacterial infections. However, the irresponsible use of antibiotics along with the lack of development has led to the emergence of antimicrobial resistance which is considered a serious global threat due to the rise of multidrug-resistant bacteria (Wang et al. in Antibiotic resistance: a rundown of a global crisis, pp. 1645-1658, 2018). Currently employed diagnostics techniques are microscopy, colony counting, ELISA, PCR, RT-PCR, surface-enhanced Raman scattering and others. These techniques provide satisfactory selectivity and sensitivity (Joung et al. in Sens Actuators B Chem 161:824-831, 2012). Nevertheless, they demand specialized personnel and expensive and sophisticated machinery which can be labour-intensive and time-consuming, (Malvano et al. in Sensors (Switzerland) 18:1-11, 2018; Mantzila et al. in Anal Chem 80:1169-1175, 2008). To get around these problems, new technologies such as biosensing and lab-on-a-chip devices have emerged in the last two decades. Impedimetric immunosensors function by applying electrochemical impedance spectroscopy to a biosensor platform using antibodies or other affinity proteins such as Affimers (Tiede et al. in Elife 6(c):1-35, 2017) or other binding proteins (Weiss et al. in Electrochim Acta 50:4248-4256, 2005) as bioreceptors, which provide excellent sensitivity and selectivity. Pre-enrichment steps are not required and this allows miniaturization and low-cost. In this review different types of impedimetric immunosensors are reported according to the type of electrode and their base layer materials, either self-assembled monolayers or polymeric layers, composition and functionalization for different types of bacteria, viruses, fungi and disease biomarkers. Additionally, novel protein scaffolds, both antibody derived and non-antibody derived, used to specifically target the analyte are considered.

Nanobodies Based on a Sandwich Immunoassay for the Detection of Staphylococcal Enterotoxin B Free from Interference by Protein A

As one of the leading causes of food poisoning, staphylococcal enterotoxins (SEs) secreted by Staphylococcus aureus pose a serious threat to human health. The immunoassay has become the dominant tool used for the rapid detection of harmful bacteria and toxins as a result of its excellent specificity. However, with regard to SEs, staphylococcal protein A (SpA) is likely to bind with the fragment crystallizable (Fc) terminal of the traditional antibody and result in a false positive, limiting the practical application of this method. Therefore, to eliminate the bottleneck problem, the sandwich immunoassay was development by replacing the traditional antibody with a nanobody (Nb) that lacked a Fc terminal. Using 0.5 × 10⁷ colony-forming units, the Nb library was constructed using Bactrian camels immunized with staphylococcal enterotoxin B (SEB) to obtain a paired Nb against SEB with good affinity. A sandwich enzyme-linked immunosorbent assay (ELISA) was developed using one Nb as the capture antibody and a phage-displayed Nb with signal-amplifying properties as the detection antibody. In optimal conditions, the current immunoassay displayed a broad quantitative range from 1 to 512 ng/mL and a 0.3 ng/mL limit of detection. The recovery of spiked milk, milk powder, cheese, and beef ranged from 87.66 to 114.2%. The Nbs-ELISA was not influenced by SpA during the detection of SEB in S. aureus food poisoning. Therefore, the Nb developed here presented the perfect candidates for immunoassay application during SE determination as a result of the complete absence of SpA interference.

Electrochemical immunosensor functionalized with nanobodies for the detection of the toxic microalgae Alexandrium minutum using glassy carbon electrode modified with gold nanoparticles

In this work an electrochemical immunosensor for the toxic microalgae Alexandrium minutum (A. minutum AL9T) detection is described. A glassy carbon electrode (GCE) was modified by depositing gold nanoparticles followed by L-cysteine for obtaining a self-assembled monolayer. The SpyTagged nanobody C1, specific for the A. minutum toxic strain AL9T, was then covalently immobilized via SpyCatcher on the surface of the modified electrode and used for the selective capture of such microalgae strain. Electrochemical impedance spectroscopy (EIS) was used for the quantification of A. minutum cells present in water samples by measuring the charge-transfer resistance changes of the electrode with a hexacyanoferrate probe. Each electrode modification step was accompanied by cyclic voltammetry (CV) and scanning electron microscopy (SEM). The immunosensor provided highly reproducible data, was simple to fabricate at low cost, exhibited higher sensitivity than previously described alternative diagnostic methods and showed a broad linear range between 10³ and 10⁹ cells L^-1 with detection limit of 3 × 10³ cells L^-1 of A. minutum AL9T. The immunosensor was successfully applied to quantify A. minutum AL9T in seawater and brackish water samples proving that it can be used for early detection of harmful microalgae without the necessity of pre-concentration or dialysis steps.

Evaluation of 64Cu radiolabeled anti-hPD-L1 Nb6 for positron emission tomography imaging in lung cancer tumor mice model

Recently, we selected a novel anti-hPD-L1-specific HCAb named Nb6 with high affinity (EC₅₀ = 0.65 ng/mL) for potential hPD-L1 targeted non-invasive PET imaging. In this research, Nb6 was conjugated with the bifunctional chelator NCS-Bz-NOTA ((2-[(4-Isothiocyanophenyl) methyl]-1,4,7-triazacy-clononane-1,4,7-triacetic acid)) and further labeled with radio-nuclide ⁶⁴Cu. ⁶⁴Cu-NOTA-Nb6 was prepared with over 95% labeling yield, over 99% radiochemical purity and 14-16 GBq/μmol specific activity after PD-10 column purification. It shows good stability in 0.01 M PBS and 5% HSA solutions. ⁶⁴Cu-NOTA-Nb6 has a high binding affinity to 3.60 nM which was tested by humanlungadenocarcinoma A549 cell lines. Tumor lesion can be clearly observed from 20 h to 38 h by Micro-PET equipment after ⁶⁴Cu-NOTA-Nb6 administration. The study revealed that ⁶⁴Cu-NOTA-Nb6 has good lesion detection ability, high ratios between tumor and non-tumor signal and can specifically target A549 xenografted tumor model. Taken together of good stability, high binding affinity, and tumor detection ability, ⁶⁴Cu labeled Nb6 is a promising radio-tracer in diagnosing of hPD-L1 overexpression tumor, supposed to monitor PD-L1overexpression tumor progression and guide targeted therapy with PET molecular imaging.

What Electrochemical Biosensors Can Do for Forensic Science? Unique Features and Applications

This article critically discusses the latest advances in the use of voltammetric, amperometric, potentiometric, and impedimetric biosensors for forensic analysis. Highlighted examples that show the advantages of these tools to develop methods capable of detecting very small concentrations of analytes and provide selective determinations through analytical responses, without significant interferences from other components of the samples, are presented and discussed, thus stressing the great versatility and utility of electrochemical biosensors in this growing research field. To illustrate this, the determination of substances with forensic relevance by using electrochemical biosensors reported in the last five years (2015–2019) are reviewed. The different configurations of enzyme or affinity biosensors used to solve analytical problems related to forensic practice, with special attention to applications in complex samples, are considered. Main prospects, challenges to focus, such as the fabrication of devices for rapid analysis of target analytes directly on-site at the crime scene, or their widespread use and successful applications to complex samples of interest in forensic analysis, and future efforts, are also briefly discussed.

Enhanced Photoelectrocatalytic Reduction and Removal of Atrazine: Effect of Co-Catalyst and Cathode Potential

Photoelectrocatalytic (PEC) reduction and removal of atrazine, one typical endocrine disruptor chemical, was achieved on Pd quantum dots modified TiO₂ nanotubes (PdQDs@TiO₂NTs) under regulating potentials. Compared with that on TiO₂NTs, the PEC reduction efficiency of atrazine on PdQDs@TiO₂NTs significantly increased, mainly attributed to the reduced electron transfer resistance, longer lifetime of the photogenerated electrons and the faster electron injection from the catalyst to atrazine in the solution. Meanwhile, PdQDs could also function as cocatalyst so that the electrocatalytic activity of PdQDs@TiO₂NTs was evidently improved. Moreover, the investigation indicated that the applied potential not only played important role in accelerating the separation of photogenerated electrons and holes, but also with the increment of the cathodic potential, the PEC reduction mechanism of atrazine underwent the variation of electro-assisted photocatalysis, synergetic photoelectro-catalysis, and photoassisted electro-catalysis. A highest atrazine PEC reduction efficiency was achieved as 99.5% on PdQDs@TiO₂NTs in about 5 h under the potential of -1.3 V vs. SCE, whereas the highest synergetic effect of photo- and electro- catalysis was achieved at a lower potential of -0.9 V vs. SCE.

Construction of Anti-hPD-L1 HCAb Nb6 and in Situ 124I Labeling for Noninvasive Detection of PD-L1 Expression in Human Bone Sarcoma

Immunotherapy is considered the fourth major treatment mode for cancer following surgery, chemotherapy, and radiotherapy. In recent years, tumor immunotherapy has achieved breakthrough progress; therefore, it is important to screen patients to identify those who will respond to tumor immunotherapy. Here, we report the construction of a novel heavy chain-only antibody (HCAb) and its corresponding ¹²⁴I-labeled probe. Using phage display technology, we generated a novel anti-hPD-L1-specific HCAb named Nb6 (selected from 95 monoclones) with high affinity for hPD-L1. The positron-emitting ¹²⁴I-labeled hPD-L1-targeted HCAb probe was prepared for further evaluation, and nonradioactive natural iodine (^natI)-labeled anti-hPD-L1 Nb6 was synthesized as a reference compound. ¹²⁵I-anti-hPD-L1 Nb6 uptake in OS-732 cells in vitro can be blocked by the precursor. The binding affinity of ¹²⁵I-anti-hPD-L1 Nb6 to OS-732 cell lines was 2.19 nM. For in vivo studies, an osteosarcoma OS-732 tumor-bearing mouse model was successfully constructed. Polymerase chain reaction (PCR) and Western blot analyses were performed to confirm the presence of the hPD-L1 gene and antigen in the tumor tissue of the OS-732 mouse model. Biodistribution showed that uptake of ¹²⁴I-anti-hPD-L1 Nb6 probes at 24 h was 4.43 ± 0.33% ID/g in OS-732 tumor tissues. Tumor lesions can be clearly delineated on micro-PET (positron emission tomography)/CT (computed tomography) imaging 24 h after injection of ¹²⁴I-anti-hPD-L1 Nb6, while the blocking group shows substantially decreased uptake on imaging. Pathological staining validated hPD-L1 expression on the surface of the tumor cell membrane; thus, ¹²⁴I-anti-hPD-L1 Nb6 can be used for in vivo noninvasive PET imaging. When administered in tandem, Nb6 and ¹²⁴I-anti-hPD-L1 Nb6 may provide a novel strategy to clinically screen patients for hPD-L1 to identify those who would benefit from immunotherapy of malignant tumors such as osteosarcoma.

A Two-Step Approach for the Design and Generation of Nanobodies

Nanobodies, the smallest possible antibody format, have become of considerable interest for biotechnological and immunotherapeutic applications. They show excellent robustness, are non-immunogenic in humans, and can easily be engineered and produced in prokaryotic hosts. Traditionally, nanobodies are selected from camelid immune libraries involving the maintenance and treatment of animals. Recent advances have involved the generation of nanobodies from naïve or synthetic libraries. However, such approaches demand large library sizes and sophisticated selection procedures. Here, we propose an alternative, two-step approach for the design and generation of nanobodies. In a first step, complementarity-determining regions (CDRs) are grafted from conventional antibody formats onto nanobody frameworks, generating weak antigen binders. In a second step, the weak binders serve as templates to design focused synthetic phage libraries for affinity maturation. We validated this approach by grafting toxin- and hapten-specific CDRs onto frameworks derived from variable domains of camelid heavy-chain-only antibodies (VHH). We then affinity matured the hapten binder via panning of a synthetic phage library. We suggest that this strategy can complement existing immune, naïve, and synthetic library based methods, requiring neither animal experiments, nor large libraries, nor sophisticated selection protocols.

Remodeling Tumor-Associated Macrophages and Neovascularization Overcomes EGFRT790M -Associated Drug Resistance by PD-L1 Nanobody-Mediated Codelivery

Precision medicine has made a significant breakthrough in the past decade. The most representative success is the molecular targeting therapy of epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors (TKI) in non-small-cell lung cancer (NSCLC) with oncogenic drivers, approved by the US Food and Drug Administration (FDA) as first-line therapeutics for substituting chemotherapy. However, the rapidly developed TKI resistance invariably leads to unsustainable treatment. For example, gefitinib is the first choice for advanced NSCLC with EGFR mutation, but most patients would soon develop secondary EGFR^T790M mutation and acquire gefitinib resistance. TKI resistance is a severe emergency issue to be solved in NSCLC, but there are a few investigations of nanomedicine reported to address this pressing problem. To overcome EGFR^T790M -associated drug resistance, a novel delivery and therapeutic strategy is developed. A PD-L1 nanobody is identified, and first used as a targeting ligand for liposomal codelivery. It is found that simvastatin/gefitinib combination nanomedicine can remodel the tumor microenvironment (e.g., neovascularization regulation, M2-macrophage repolarization, and innate immunity), and display the effectiveness of reversing the gefitinib resistance and enhancing the EGFR^T790M -mutated NSCLC treatment outcomes. The novel simvastatin-based nanomedicine provides a clinically translatable strategy for tackling the major problem in NSCLC treatment and demonstrates the promise of an old drug for new application.

Sandwich pair nanobodies, a potential tool for electrochemical immunosensing serum prostate-specific antigen with preferable specificity

Prostate-Specific Antigen (PSA) is a crucial biomarker for screening prostate cancer, but a sensitive and selective immunosensor for rapid quantification of serum PSA remains to be developed. In this study, a sandwich pair of nanobodies (Nbs) (i.e., Nb2 and Nb40) against PSA surface antigen was obtained from an alpaca-derived immune phage display library. A sandwich-type immunosensor for the sensitive and selective detection of PSA in serum samples was ingeniously designed based on the pair of Nbs. The small size of Nb40 allowed high capture densities on the surface of reduced graphene oxide (rGO) nanocomposed with massive Au nanoparticles (rGO@AuNPs), which significantly improved the conductivity and provided a large area to anchor many primary antibodies. The secondary antibody Nb2 fused with streptavidin -binding peptide (SBP) cooperated with Nb40 for PSA sandwiching. Accompanying introduction of horseradish peroxidase-streptavidin (HRP-SA) coupled with Nb2-SBP, the faradaic current was linearly correlated with the logarithm of PSA concentration in a range of 0.1-100 ng mL-1. More importantly, this immunosensor exhibited excellent selectivity, stability, and reproducibility due to the sandwich pair Nbs. The proposed immunosensor was successfully applied in determining PSA in serum samples and could be used for the sensitive and specific detection of PSA.

Direct Immunoassay for Facile and Sensitive Detection of Small Molecule Aflatoxin B1 based on Nanobody

Aflatoxin B₁ (AFB₁ ), one of the most toxic mycotoxins, is classified as a group I carcinogen and ubiquitous in various foods and agriproducts. Thus, accurate and sensitive determination of AFB₁ is of great significance to meet the criteria of food safety. Direct detection of AFB₁ is difficult by monoclonal antibody (mAb) with large molecular size (≈150 kD) since the target is too small to produce a detectable signal change. Herein, by combining the electrochemical properties of nanomaterials and the advantages of nanobodies, we developed a direct, highly selective and sensitive electrochemical immunosensor for small molecule detection. The proposed immunosensor had a wide calibration range of 0.01 to 100 ng mL^-1 and a low detection limit of 3.3 pg mL^-1 (S/N=3). Compared with the immunosensor prepared with mAb which was applied in the typical indirect immunoassay, the immunosensor in this work possessed two orders of magnitudes wider linear range and 10-fold more sensitivity. The as-obtained immunosensor was further successfully applied for sensing AFB₁ in real samples. This proposed assay would provide a simple, highly sensitive and selective approach for the direct immunoassay of small molecule AFB₁ , and is extendable to the development of direct immunosensing systems for other small molecules detection by coupling nanocarbon and nanobody.

In Situ Pt Staining Method for Simple, Stable, and Sensitive Pressure-Based Bioassays

Pressure-based bioassays (PASS) integrate a molecular recognition process with a catalyzed gas generation reaction, enabling sensitive and portable quantitation of biomarkers in clinical samples. Using platinum nanoparticles (PtNPs) as a catalyst has significantly improved the sensitivity of PASS compared with protein enzyme-based detection. However, PtNPs are easily deactivated during storage or after being decorated with antibodies. Moreover, nonspecific adsorption of PtNPs on substrates has been a problem, resulting in significant backgrounds. To solve these problems of PtNP-based detection, we report a robust, simple, stable, and sensitive Pt staining method for PASS. Detection antibody-decorated gold nanoparticles (AuNPs) are used to perform enzyme-linked immunosorbent assay, followed by Pt staining to stain AuNPs with Ag and Pt bimetallic shells (Au@AgPtNPs), which endow AuNPs with catalytic activity. The concentration of targets can be quantitatively determined by measuring the pressure due to O₂ gas (g) formed by the decomposition of H₂O₂ catalyzed by Au@AgPtNPs. C-reactive protein and avian influenza hemagglutinin 5 neuraminidase 1 can be quantitatively detected with detection limits of 0.015 and 0.065 ng/mL, respectively. The simple, stable, and sensitive properties of the Pt staining-based method will largely broaden the applications of PASS in clinical diagnosis and biomedicine.

Boosted Electrochemical Immunosensing of Genetically Modified Crop Markers Using Nanobody and Mesoporous Carbon

The problems of environmental security and the potential risks of human health caused by transgenic crops have attracted much attention. Recent studies reveal 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) from Agrobacterium sp. strain CP4 protein (CP4-EPSPS), which shows very high resistance to herbicide glyphosate, is a typical biomarker of genetically modified (GM) crops. For this reason, it is highly anticipated to devise a sensitive and convenient strategy to detect CP4-EPSPS protein in crops. Herein, we report a simple electrochemical immunosensor by coupling nanobody, ordered mesoporous carbon (OMC), and thionine (Th). As a capture agent, the nanobody was screened out from an immunized Bactrian camel, and exhibited superior properties with respect to conventional antibody, such as higher stability and stronger heat resistance. Moreover, OMC offered an effective platform with high surface area, electrical conductivity, and biocompatibility, which greatly facilitated the assembly of redox probe Th, and further coupling of large amount of capture nanobodies. As a result, the CP4-EPSPS protein could be determined with high sensitivity and efficiency by differential pulse voltammetry (DPV) in a wide linear range from 0.001 to 100 ng·mL^-1 with a low detection limit of 0.72 pg·mL^-1, which was more than 3 orders of magnitude lower than those of previously reported works. As an example, the proposed electrochemical immunosensor was successfully applied to spiked samples, demonstrating its great potential in CP4-EPSPS screening and detection.

Nanobodies: Chemical Functionalization Strategies and Intracellular Applications

Nanobodies can be seen as next-generation tools for the recognition and modulation of antigens that are inaccessible to conventional antibodies. Due to their compact structure and high stability, nanobodies see frequent usage in basic research, and their chemical functionalization opens the way towards promising diagnostic and therapeutic applications. In this Review, central aspects of nanobody functionalization are presented, together with selected applications. While early conjugation strategies relied on the random modification of natural amino acids, more recent studies have focused on the site-specific attachment of functional moieties. Such techniques include chemoenzymatic approaches, expressed protein ligation, and amber suppression in combination with bioorthogonal modification strategies. Recent applications range from sophisticated imaging and mass spectrometry to the delivery of nanobodies into living cells for the visualization and manipulation of intracellular antigens.

A ZnS nanocrystal/reduced graphene oxide composite anode with enhanced electrochemical performances for lithium-ion batteries

A simple route for the preparation of ZnS nanocrystal/reduced graphene oxide (ZnS/RGO) by a hydrothermal synthesis process was achieved. The chemical composition, morphology, and structural characterization reveal that the ZnS/RGO composite is composed of sphalerite-phased ZnS nanocrystals uniformly dispersed on functional RGO sheets with a high specific surface area. The ZnS/RGO composite was utilized as an anode in the construction of a high-performance lithium-ion battery. The ZnS/RGO composite with appropriate RGO content exhibits a high reversible specific capacity (780 mA h g^-1), excellent cycle stability over 100 cycles (71.3% retention), and good rate performance at 2C (51.2% of its capacity when measured at a 0.1C rate). To further investigate this ZnS/RGO anode for practical use in full Li-ion cells, we tested the electrochemical performance of the ZnS/RGO anode at different cut-off voltages for the first time. The presence of RGO plays an important role in providing high conductivity as well as a substrate with a high surface area. This helps alleviate the typically problems associated with volume expansion and shrinkage during prolonged cycling. Additionally, the RGO provides multiple nucleation points that result in a uniformly dispersed film of nanosized ZnS that covers its surface. Thus, the high surface area RGO enables high electronic conductivity and fast charge transfer kinetics for ZnS lithiation/delithiation.