Surface Physical Activity and Hydrophobicity of Designed Helical Peptide Amphiphiles Control Their Bioactivity and Cell Selectivity

Rationally designed highly amphipathic antimicrobial peptides demonstrating superior bacterial selectivity relative to the corresponding α-helix peptide

De novo design of antimicrobial peptides is a pivotal strategy for developing new antibacterial agents, leveraging its rapid and efficient nature. (XXYY)n, where X represents cationic residues, Y denotes hydrophobic residues, and n varies from 2 to 4, is a classical α-helix template. Based on which, numerous antimicrobial peptides have been synthesized. Herein, we hypothesize that the amphipathy of this type of α-helix template can be further enhanced based on the principles of α-helical protein folding, characterized by a rotation occurring every 3.6 amino acid residues, and propose the highly amphipathic template XXYYXXYXXYYX (where X represents cationic residues and Y denotes hydrophobic residues). Accordingly, the amino acid composition and arrangement of the α-helix peptide (RRWF)3 are adjusted, yielding the highly amphipathic counterpart H-R (RRWFRRWRRWFR). The structure-activity relationship of which is further explored through the substitution of residues at positions 8 and 12. Notably, the highly amphipathic peptides exhibit enhanced antimicrobial activity and reduced hemolytic toxicity compared to (RRWF)3, resulting in superior bacterial selectivity. The most highly amphipathic peptide, H-R, demonstrates potent activity against biofilms and multidrug-resistant bacteria, low propensity for resistance, and high safety and effectiveness in vivo. The antibacterial mechanisms of H-R are also preliminarily investigated in this study. As noted, H-R represents a promising antimicrobial candidate for addressing infections associated with drug-resistant bacteria.

Development of novel broad-spectrum amphipathic antimicrobial peptides against multidrug-resistant bacteria through a rational combination strategy

INTRODUCTION

In recent years, cationic amphipathic antimicrobial peptides (AMPs) have shown great promise in combating antibiotic resistance on account of their distinctive membrane-disruptive mechanism. However, the clinical application of AMPs is restricted by their unsatisfactory stability and safety. Although attempts have been made to improve the stability and safety of AMPs, many of them are accompanied by a decline in their antimicrobial activity and bacterial selectivity.

OBJECTIVES

To develop AMPs with excellent and balanced antimicrobial activity, stability, and safety using a combination strategy.

METHODS

A series of sC184b-derived peptide analogues were designed by a combination strategy of subtly adjusting the charges, hydrophobic properties, and introducing specific unnatural amino acids in a well-balanced manner. The antimicrobial activity, cytotoxicity, hemolytic activity, stability, anti-biofilm activity, mechanism of action, synergistic effects, in vivo efficacy, and pharmacokinetics of the analogues were evaluated.

RESULTS

Among these analogues, P-α-02-B stood out for its broad-spectrum and potent antimicrobial activity, anti-biofilm activity, desirable bacterial selectivity, high plasma stability, and synergistic effect with antibiotic levofloxacin. P-α-02-B exhibited strong membrane disturbance effect, which could be explained by its rigid α-helical structure revealed by molecular dynamics simulations. More importantly, P-α-02-B showed favorable therapeutic efficacy in vivo, whether used alone or in combination with levofloxacin.

CONCLUSION

P-α-02-B is a promising antimicrobial agent for MDR bacterial infections, demonstrating the effectiveness of the combination strategy for AMP development.

Senegalin-2: A Novel Hexadecapeptide from Kassina senegalensis with Antibacterial and Muscle Relaxant Activities, and Its Derivative Senegalin-2BK as a Bradykinin Antagonist

The amphibian skin secretions are excellent sources of bioactive peptides, some of which and their derivatives exhibit multiple properties, including antibacterial and antagonism against bradykinin. A novel peptide Senegalin-2 was isolated from the skin secretions of Kassina senegalensis frog. Senegalin-2 relaxed rat bladder smooth muscle (EC50 17.94 nM) and ileum smooth muscle (EC50 135 nM), inhibited S. aureus and MRSA at 2 μM, and exhibited low hemolytic activity with no cytotoxicity. To design effective bradykinin antagonists, Senegalin-2 was conjugated with bradykinin to synthesize Senegalin-2BK. This modification retained potent activity against Gram-positive bacteria. Compared to Senegalin-2, Senegalin-2BK significantly reduced hemolysis and exhibited a more than threefold increase in the selectivity index. Furthermore, Senegalin-2BK contracted the bladder (EC50 2.83 μM) and ileum (EC50 56.64 nM)'s smooth muscle. The pretreatment with 10-7 M Senegalin-2BK reduced the 10-6 M bradykinin contraction on the bladder by over 70%. In conclusion, Senegalin-2 has dual functionalities as an antibacterial agent and muscle relaxant, positioning it as a potential therapeutic candidate for managing overactive bladder. As a synthetically derived bradykinin antagonist and myotropic peptide with antibacterial properties, Senegalin-2BK shows promise in effective therapies for relieving pain, inflammation, and addressing muscular disorders such as urinary retention, constipation, and infections.

Antibiofilm Mechanisms of the Helical G3 Peptide against Staphylococcus epidermidis

Antibacterial peptides (ABPs) have been recognized as promising alternatives to conventional antibiotics due to their broad antibacterial spectrum, high antibacterial activity, and low possibility of inducing bacterial resistance. However, their antibiofilm mechanisms have not yet reached a consensus. In this study, we investigated the antibiofilm activity of a short helical peptide G3 against Staphylococcus epidermidis, one of the most important strains of medical device contamination. Studies show that G3 inhibits S. epidermidis biofilm formation in a variety of ways. In the initial adhesion stage, G3 changes the properties of bacterial surfaces, such as charges, hydrophobicity, and permeability, by rapidly binding to them, thus interfering with their initial adhesion. In the mature stage, G3 prefers to target extracellular polysaccharides, leading to the death of outside bacteria and the disruption of the three-dimensional (3D) architecture of the bacterial biofilm. Such efficient antibiofilm activity of G3 endows it with great potential in the treatment of infections induced by the S. epidermidis biofilm.

Employment of mastoparan-like peptides to prevent Staphylococcus aureus associated with bovine mastitis

Bovine mastitis is a frequent infection in lactating cattle, causing great economic losses. Staphylococcus aureus represents the main etiological agent, which causes recurrent and persistent intramammary infections because conventional antibiotics are ineffective against it. Mastoparan-like peptides are multifunctional molecules with broad antimicrobial potential, constituting an attractive alternative. Nevertheless, their toxicity to host cells has hindered their therapeutic application. Previously, our group engineered three mastoparan-L analogs, namely mastoparan-MO, mastoparan-R1, and [I5, R8] MP, to improve cell selectivity and potential. Here, we were interested in comparing the antibacterial efficacy of mastoparan-L and its analogs against bovine mastitis isolates of S. aureus strains, making a correlation with the physicochemical properties and structural arrangement changes promoted by the sequence modifications. As a result, the analog's hemolytic and/or antimicrobial activity was balanced. All the peptides displayed α-helical folding in hydrophobic and membrane-mimetic environments, as determined by circular dichroism. The peptide [I5, R8] MP stood out for its enhanced selectivity and antibacterial features related to mastoparan-L and the other derivatives. Biophysical approaches revealed that [I5, R8] MP rapidly depolarizes the bacterial membrane of S. aureus, causing cell death by subsequent membrane disruption. Our results demonstrated that the [I5, R8] MP peptide could be a starting point for the development of peptide-based drugs for the treatment of bovine mastitis, with the advantage of no residue in milk, which would help reduce the use of classical antibiotics.IMPORTANCEStaphylococcus aureus is a leading cause of mastitis, the world's most important dairy cattle disease. The multidrug resistance and zoonotic potential of S. aureus, besides the likelihood of antibiotic residues in milk, are of critical concern to public and animal health. Antimicrobial peptides offer a novel antimicrobial strategy. Here, we demonstrate that [I5, R8] MP is a potent and selective peptide, which acts on S. aureus by targeting the bacterial membrane. Therefore, understanding the physicochemical determinants and the modes of action of this class of antimicrobials opens novel prospects for peptide development with enhanced activities in the bovine mastitis context.

From oncolytic peptides to oncolytic polymers: A new paradigm for oncotherapy

Traditional cancer therapy methods, especially those directed against specific intracellular targets or signaling pathways, are not powerful enough to overcome tumor heterogeneity and therapeutic resistance. Oncolytic peptides that can induce membrane lysis-mediated cancer cell death and subsequent anticancer immune responses, has provided a new paradigm for cancer therapy. However, the clinical application of oncolytic peptides is always limited by some factors such as unsatisfactory bio-distribution, poor stability, and off-target toxicity. To overcome these limitations, oncolytic polymers stand out as prospective therapeutic materials owing to their high stability, chemical versatility, and scalable production capacity, which has the potential to drive a revolution in cancer treatment. This review provides an overview of the mechanism and structure-activity relationship of oncolytic peptides. Then the oncolytic peptides-mediated combination therapy and the nano-delivery strategies for oncolytic peptides are summarized. Emphatically, the current research progress of oncolytic polymers has been highlighted. Lastly, the challenges and prospects in the development of oncolytic polymers are discussed.

Disassembling ability of lipopeptide promotes the antibacterial activity

Lipopeptides have become one of the most potent antibacterial agents, however, there is so far no consensus about the link between their physic-chemical properties and biological activity, in particular their inherent aggregation propensity and antibacterial potency. To this end, we here de novo design a series of lipopeptides (C_nH_(2n-1)O-(VVKK)₂V-NH₂), in which an alkyl chain is covalently attached onto the N-terminus of a short cationic peptide sequence with an alternating pattern of hydrophobic VV (Val) and positively charged KK (Lys) motifs. By varying the alkyl chain length (ortho-octanoic acid (C8), lauric acid (C12), and palmitic acid (C16)), the lipopeptides show distinct physicochemical properties and self-assembly behaviors, which have great effect on their antibacterial activities. C₈H₁₅O-(VVKK)₂V-NH₂, which contains the lowest hydrophobicity and surface activity has the lowest antibacterial activity. C₁₂H₂₃O-(VVKK)₂V-NH₂ and C₁₆H₃₁O-(VVKK)₂V-NH₂ both have high hydrophobicity and surface activity, and self-assembled into long nanofibers. However, the nanofibers formed by C₁₂H₂₃O-(VVKK)₂V-NH₂ disassembled by dilution, resulting in its high antibacterial activity via bacterial membrane disruption. Comparatively, the nanofibers formed by C₁₆H₃₁O-(VVKK)₂V-NH₂ were very stable, which can closely attach on bacterial surface but not permeate bacterial membrane, leading to its low antibacterial activity. Thus, the stability other than the morphologies of lipopeptides' nanostructures contribute to their antibacterial ability. Importantly, this study enhances our understanding of the antibacterial mechanisms of self-assembling lipopeptides that will be helpful in exploring their biomedical applications.

Surfactant like peptides for targeted gene delivery to cancer cells

Surfactant like peptides (SLPs) are a class of amphiphilic peptides widely used for drug delivery and tissue engineering. However, there are very few reports on their application for gene delivery. The current study was aimed at development of two new SLPs, named (IA)4K and (IG)4K, for selective delivery of antisense oligodeoxynucleotides (ODNs) and small interfering RNA (siRNA) to cancer cells. The peptides were synthesized by Fmoc solid phase synthesis. Their complexation with nucleic acids was studied by gel electrophoresis and DLS. The transfection efficiency of the peptides was assessed in HCT 116 colorectal cancer cells and human dermal fibroblasts (HDFs) using high content microscopy. The cytotoxicity of the peptides was assessed by standard MTT test. The interaction of the peptides with model membranes was studied using CD spectroscopy. Both SLPs delivered siRNA and ODNs to HCT 116 colorectal cancer cells with high transfection efficiency which was comparable to the commercial lipid-based transfection reagents, but with higher selectivity for HCT 116 compared to HDFs. Moreover, both peptides exhibited very low cytotoxicity even at high concentrations and long exposure time. The current study provides more insights into the structural features of SLPs required for nucleic acid complexation and delivery and can therefore serve as a guide for the rational design of new SLPs for selective gene delivery to cancer cells to minimize the adverse effects in healthy tissues.

Anticancer effect of rationally designed α-helical amphiphilic peptides

Anticancer peptides (ACPs) have attracted increasing attention in cancer therapy due to their unique mechanism of action on cancer cells. The main challenge is to establish the correlation between their physicochemical properties and their selectivity and anticancer effect, leading to a clear design strategy. In this study, a series of new α-helical short peptides (coded At1-At12) with different anticancer activities were systematically designed with different amphiphilicity based on a natural α-helical antimicrobial peptide (AMP) derived from ant. Three of the designed peptides, At7, At10 and At11, showed considerable anticancer activity with low toxicity to normal skin fibroblasts. The high selectivity of the peptides is attributed to their balanced amphiphilicity and cationic nature which favours binding to the outer membrane of negatively charged cancer cells over the neutral membrane of normal mammalian cells. In addition to rapid membrane penetration, the designed peptides also damaged the mitochondria and induced mitochondrial membrane depolarization. Moreover, these peptides were found to induce apoptosis in cancer cells by up-regulating the expression of apoptotic proteins Bax and Caspase-3, down-regulating the apoptotic protein Bcl-2, and activating the Caspase enzyme-linked reaction. The results of this study reveal the potential of these peptides for clinical applications, and provide a guidance for further development of highly selective anticancer medications.

Highly selective performance of rationally designed antimicrobial peptides based on ponericin-W1

Antimicrobial peptides (AMPs) or host-defence peptides act by penetrating and disrupting the bacterial membranes and are therefore less prone to antimicrobial resistance (AMR) compared to conventional antibiotics. However, there are still many challenges in the clinical application of the naturally occurring AMPs which necessitates further studies to establish the relationship between the chemical structure of AMPs and their antimicrobial activity and selectivity. Herein, we report a study on the relationship between the chemical structure and the biological activity of a series of rationally designed AMPs derived from Ponericin-W1, a naturally occurring AMP from ants. The peptides were designed by modification of the hydrophobic and hydrophilic regions of the lead peptide sequence in a systematic way. Their antibacterial and hemolytic activities were determined in vitro. The antibacterial activity of a representative peptide, At5 was also tested in a mouse model of skin wound infection. Furthermore, the relationship between the physicochemical properties of the peptides and their antibacterial activity was investigated. Replacing the cationic amino acids in the hydrophobic region of the peptides with hydrophobic amino acids enhanced their antibacterial activity and increasing the number of cationic amino acids in the hydrophilic region reduced their toxicity to human red blood cells and thus improved their selectivity for bacteria. Four of the designed peptides, coded as At3, At5, At8, and At10, displayed considerable antibacterial activity and high selectivity for bacteria. At5 also accelerated the wound healing in mice indicating high in vivo efficiency of this peptide. The peptides were more effective against Gram-negative bacteria and no AMR was developed against them in the bacteria even after 25 generations. The results from this study can provide a better understanding of the structural features required for strong antibacterial activity and selectivity, and serve as a guide for the future rational design of AMPs.

Fabrication of injectable hydrogels from an anticancer peptide for local therapeutic delivery and synergistic photothermal-chemotherapy

The susceptibility of anticancer peptides to proteolytic degradation is often considered as a major weakness that limits systemic therapeutic applications. However, localized delivery of anticancer peptides via injectable hydrogels is expected to improve drug efficacy and reduce systemic toxicity. Herein, an injectable hydrogel with drug releasing properties, NIR responsiveness and pH sensitivity was developed from an anticancer peptide (KL), Fe³⁺ ions and protocatechualdehyde via dynamic and reversible interactions. Benefiting from the formation of Fe(III)-catechol complexes between Fe³⁺ ions and protocatechualdehyde within gel networks, the obtained hydrogel exhibited intrinsic NIR absorption properties for photothermal ablation of tumor cells, and remote light control of drug release. Besides, the pH-labile imine bonds between KL and protocatechualdehyde endowed the injectable gel with pH sensitivity for sustained release of KL under a mildly acidic environment, inducing membrane destabilization and facilitating the cell uptake of DOX for combinational chemotherapy. Both in vitro and in vivo experiments revealed that the injectable hydrogel exhibited a synergistic therapeutic effect on inhibiting tumor growth via combinational photothermal-chemotherapy. Therefore, this work provides a promising attempt to develop a therapeutic hydrogel from an anticancer peptide, which could work as a localized drug delivery platform for synergistic photothermal-chemotherapy.

In-Membrane Nanostructuring of Cationic Amphiphiles Affects Their Antimicrobial Efficacy and Cytotoxicity: A Comparison Study between a De Novo Antimicrobial Lipopeptide and Traditional Biocides

Cationic biocides have been widely used as active ingredients in personal care and healthcare products for infection control and wound treatment for a long time, but there are concerns over their cytotoxicity and antimicrobial resistance. Designed lipopeptides are potential candidates for alleviating these issues because of their mildness to mammalian host cells and their high efficacy against pathogenic microbial membranes. In this study, antimicrobial and cytotoxic properties of a de novo designed lipopeptide, CH₃(CH₂)₁₂CO-Lys-Lys-Gly-Gly-Ile-Ile-NH₂ (C₁₄KKGGII), were assessed against that of two traditional cationic biocides C_nTAB (n = 12 and 14), with different critical aggregation concentrations (CACs). C₁₄KKGGII was shown to be more potent against both bacteria and fungi but milder to fibroblast host cells than the two biocides. Biophysical measurements mimicking the main features of microbial and host cell membranes were obtained for both lipid monolayer models using neutron reflection and small unilamellar vesicles (SUVs) using fluorescein leakage and zeta potential changes. The results revealed selective binding to anionic lipid membranes from the lipopeptide and in-membrane nanostructuring that is distinctly different from the co-assembly of the conventional C_nTAB. Furthermore, C_nTAB binding to the model membranes showed low selectivity, and its high cytotoxicity could be attributed to both membrane lysis and chemical toxicity. This work demonstrates the advantages of the lipopeptides and their potential for further development toward clinical application.

Rationally designed cationic amphiphilic peptides for selective gene delivery to cancer cells

Gene therapy has gained increasing attention as an alternative to pharmacotherapy for treatment of various diseases. The extracellular and intracellular barriers to gene delivery necessitate the use of gene vectors which has led to the development of myriads of gene delivery systems. However, many of these gene delivery systems have pitfalls such as low biocompatibility, low loading efficiency, low transfection efficiency, lack of tissue selectivity and high production costs. Herein, we report the development of a new series of short cationic amphiphilic peptides with anticancer activity for selective delivery of small interfering RNA (siRNA) and antisense oligodeoxynucleotides (ODNs) to cancer cells. The peptides consist of alternating dyads of hydrophobic (isoleucine (I) or leucine (L)) and hydrophilic (arginine (R) or lysine (L)) amino acids. The peptides exhibited higher preference for transfection of HCT 116 colorectal cancer cells compared to human dermal fibroblasts (HDFs) and induced higher level of gene silencing in the cancer cells. The nucleic acid complexation and transfection efficiency of the peptides was a function of their secondary structure, their hydrophobicity and their C-terminal amino acid. The peptides containing L in their hydrophobic domain formed stronger complexes with siRNA and successfully delivered it to the cancer cells but were unable to release their cargo inside the cells and therefore could not induce any gene silencing. On the contrary, the peptides containing I in their hydrophobic domain were able to release their associated siRNA and induce considerable gene silencing in cancer cells. The peptides exhibited higher selectivity for colorectal cancer cells and induced less gene silencing in fibroblasts compared to the lipid-based commercial transfection reagent DharmaFECT™ 1. The results from this study can serve as a tool for rational design of new peptide-based gene vectors for high selective gene delivery to cancer cells.

How do terminal modifications of short designed IIKK peptide amphiphiles affect their antifungal activity and biocompatibility?

HYPOTHESIS

The widespread and prolonged use of antifungal antibiotics has led to the rapid emergence of multidrug resistant Candida species that compromise current treatments. Natural and synthetic antimicrobial peptides (AMPs) offer potential alternatives but require further development to overcome some of their current drawbacks. AMPs kill pathogenic fungi by permeabilising their membranes but it remains unclear how AMPs can be designed to maximise their antifungal potency whilst minimising their toxicity to host cells.

EXPERIMENTS

We have designed a group of short (IIKK)₃ AMPs via selective terminal modifications ending up with different amphiphilicities. Their antifungal performance was assessed by minimum inhibition concentration (MICs) and dynamic killing to 4 Candida strains and Cryptococcus neoformans, and the minimum biofilm-eradicating concentrations to kill 95% of the C. albicans biofilms (BEC₉₅). Different antifungal actions were interpreted on the basis of structural disruptions of the AMPs to small unilamellar vesicles from fluorescence leakage, Zeta potential, small angle neutron scattering (SANS) and molecular dynamics simulations (MD).

FINDING

AMPs possess high antifungal activities against the Candida species and Cryptococcus neoformans; some of them displayed faster dynamic killing than antibiotics like amphotericin B. G(IIKK)₃I-NH₂ and (IIKK)₃II-NH₂ were particularly potent against not only planktonic microbes but also fungal biofilms with low cytotoxicity to host cells. It was found that their high selectivity and fast action were well correlated to their fast membrane lysis, evident from data measured from Zeta potential measurements, SANS and MD, and also consistent with the previously observed antibacterial and anticancer performance. These studies demonstrate the important role of colloid and interface science in further developing short, potent and biocompatible AMPs towards clinical treatments via structure design and optimization.

Rationally designed short cationic α-helical peptides with selective anticancer activity

HYPOTHESIS

Naturally derived or synthetic anticancer peptides (ACPs) have emerged as a new generation of anticancer agents with higher selectivity for cancer cells and less propensity for drug resistance. Despite the structural diversity of ACPs, α-helix is the most common secondary structure among them. Herein we report the development of a new library of short cationic amphiphilic α-helical ACPs with selective cytotoxicity against colorectal and cervical cancer.

EXPERIMENTS

The peptides had a general formula C(XXYY)3 with C representing amino acid cysteine (providing a -SH group for molecular conjugation), X representing hydrophobic amino acids (isoleucine (I) or leucine (L)), and Y representing cationic amino acids (arginine (R) or lysine (K)). Two variants of the peptides were synthesized by adding additional Isoleucine residues to the C-terminal and replacing the N-terminal cysteine with LC-propargylglycine (LC-G) to investigate the effect of N-terminal and C-terminal variation on the anticancer activity. The structure and physicochemical properties of the peptides were determined by RP-HPLC, LC-MS and CD spectroscopy. The cytotoxicity of the peptides in different cell lines was assessed by MTT test, cell proliferation assay and mitochondrial damage assay. The mechanism of cell selectivity of the peptides was investigated by studying their interfacial behaviour at the air/water and lipid/water interface using Langmuir trough.

FINDINGS

The peptides consisting of K residues in their hydrophilic domains exhibited more selective anticancer activity whereas the peptides containing R exhibited strong toxicity in normal cells. The anticancer activity of the peptides was a function of their helical content and their hydrophobicity. Therefore, the addition of two I residues at C-terminal enhanced the anticancer activity of the peptides by increasing their hydrophobicity and their helical content. These two variants also exhibited strong anticancer activity against colorectal cancer multicellular tumour spheroids (MCTS). The higher toxicity of the peptides in cancer cells compared to normal cells was the result of higher penetration into the negatively charged cancer cell membranes, leading to higher cellular uptake, and their cytotoxic effect was mainly exerted by damaging the mitochondrial membranes leading to apoptosis. The results from this study provide a basis for rational design of new α-helical ACPs with enhanced anticancer activity and selectivity.

Correlation between the secondary structure and surface activity of β-sheet forming cationic amphiphilic peptides and their anticancer activity

Cancer is one of the main causes of death worldwide. The current cancer treatment strategies often lack selectivity for cancer cells resulting in dose-limiting adverse effects and reduced quality of life. Recently, anticancer peptides (ACPs) have emerged as an alternative treatment with higher selectivity, less adverse effects, and lower propensity for drug resistance. However, most of the current studies on the ACPs are focused on α-helical ACPs and there is lack of systematic studies on β-sheet forming ACPs. Herein we report the development of a new series of rationally designed short cationic amphiphilic β-sheet forming ACPs and their structure activity relationship. The peptides had the general formula (XY1XY2)3, with X representing hydrophobic amino acids (isoleucine (I) or leucine (L)), Y1 and Y2 representing cationic amino acids (arginine (R) or lysine (K)). The cytotoxicity of the designed ACPs in HCT 116 colorectal cancer, HeLa cervical cancer and human dermal fibroblast (HDF) cells was assessed by MTT test. The physicochemical properties of the peptides were characterized by various techniques including RP-HPLC, LC-MS, and Circular Dichroism (CD) spectroscopy. The surface activity of the peptides at the air-water interface and their interaction with the lipid monolayers as models for cell membranes were studied by Langmuir trough. The peptides consisting of I with R and K had selective anticancer activity while the combination of L and R diminished the anticancer activity of the peptides but rendered them more toxic to HDFs. The anticancer activity of the peptides was directed by their surface activity (amphiphilicity) and their secondary structure in hydrophobic surfaces including cancer cell membranes. The selectivity of the peptides for cancer cells was a result of their higher penetration into cancer cell membranes compared to normal cell membranes. The peptides exerted their anticancer activity by disrupting the mitochondrial membranes and eventually apoptosis. The results presented in this study provide an insight into the structure-activity relationship of this class of ACPs which can be employed as guidance to design new ACPs with improved anticancer activity and lower toxicity against normal cells.

Fatty Acid Modification of the Anticancer Peptide LVTX-9 to Enhance Its Cytotoxicity against Malignant Melanoma Cells

Spider venom is a valuable resource for the development of novel anticancer drugs. In this study, we focused on novel linear amphipathic α-helical anticancer peptide LVTX-9, which was derived from the cDNA library of the venom gland of the spider Lycosa vittata. The cytotoxicity of LVTX-9 against murine melanoma cells in the range of 1.56-200 μM was tested and found to be significantly lower than those of most anticancer peptides reported. Its IC₅₀ was determined to be 59.2 ± 19.8 μM in a serum or 76.3 ± 12.7 μM in serum-free medium. Fatty acid modification is a promising strategy for improving peptide performance. Therefore, to enhance the cytotoxic activity of LVTX-9, fatty acid modification of this peptide was performed, and five different carbon chain length lipopeptides named LVTX-9-C₁₂-C₂₀ were produced. Among them, the lipopeptide LVTX-9-C₁₈ showed the highest cytotoxic activity in relation to B16-F10 cells, whether in a serum or serum-free medium. Most importantly, the cytotoxic activity of LVTX-9-C₁₈ was improved by about 12.9 times in a serum medium or 19.3 times in a serum-free medium compared to that of LVTX-9. Subsequently, assays including scanning electron microscopy, trypan blue staining, lactate dehydrogenase leakage assay, and hemolytic activity could indicate that the potential direct cell membrane disruption is the main mechanism of LVTX-9-C₁₈ to induce cancer cell death. Furthermore, the LVTX-9-C₁₈ also showed strong cytotoxicity in relation to 3D B16-F10 spheroids, which indicates it might be a promising lead for developing anticancer drugs.

Designed Antitumor Peptide for Targeted siRNA Delivery into Cancer Spheroids

Antimicrobial/anticancer peptides (AMPs/ACPs) have shown promising results as new therapeutic agents in cancer thearpy. Among them, the designed amphiphilic α-helical peptide G(IIKK)₃I-NH₂ (G3) displayed great affinity and specificity in targeting cancer cells. Here, we report new insights on how G3 penetrates cancer cells. G3 showed high specificity to HCT-116 colon cancer cells compared to the HDFs (human neonatal primary dermal fibroblasts) control. With high concentrations of peptide, a clear cancer cell membrane disruption was observed through SEM. Gene knockdown of the endocytic pathways demonstrated that an energy-dependent endocytic pathway is required for the uptake of the peptide. In addition, G3 can protect and selectively deliver siRNAs into cancer cells and successfully modulated their gene expression. Gene delivery was also tested in 3D cancer spheroids and showed deep penetration delivery into the cancer spheroids. Finally, the in vivo toxicity of G3 was evaluated on zebrafish embryos, showing an increasing toxicity effect with concentration. However, the toxicity of the peptide was attenuated when complexed with siRNA. In addition, negligible toxicity was observed at the concentration range for efficient gene delivery. The current results demonstrate that G3 is promising as an excellent agent for cancer therapy.

Antiproliferative effects of mealworm larvae (Tenebrio molitor) aqueous extract on human colorectal adenocarcinoma (Caco-2) and hepatocellular carcinoma (HepG2) cancer cell lines

Recently, insects have aroused the interest of researchers as potential therapeutic resources against malignant diseases such as cancer. In this study, the effects of aqueous extracts from mysore thorn borer (MTB) (Anoplophora chinensis) and mealworm larvae (MWL) (Tenebrio molitor) against cancer cells were investigated. MWL aqueous extract showed higher antiproliferative effects against Caco-2 and HepG2 cells compared to MTB. The IC₅₀ (48 hr) of MWL aqueous extract were 11.44 and 20 mg/ml for Caco-2 and HepG2 respectively. Flow cytometry analysis showed that MWL aqueous extract induced apoptosis in Caco-2 and HepG2 increasing from 2.06% to 74.34% and from 0.04% to 42.14% after 24 hr respectively. Caspase activity assay showed that apoptosis was mediated via death receptor pathway mediated by caspase-8 and -9 followed by the activation of caspase-3; caspase-3 may have induced DNA damage and cell death. These effects may be correlated to its free amino acids. The results of this study demonstrate the potentials of MWL in the development of natural anticancer therapeutics in the future. PRACTICAL APPLICATIONS: Natural nutraceuticals from insects might be useful for the treatment and prevention of cancers such as colorectal and liver cancer. In recent years, edible insects have caught the attention of researchers, because of their potential as an alternative source of food and nutraceuticals. The results of our study showed that MWL extract might provide important anticancer compounds against colon and liver cancer.

Structural elucidation upon binding of antimicrobial peptides into binary mixed lipid monolayers mimicking bacterial membranes

HYPOTHESIS

Antimicrobial peptides (AMPs) kill microorganisms by causing structural damage to bacterial membranes. Different microorganisms often require a different type and concentration of an AMP to achieve full microbial killing. We hypothesise that the difference is caused by different membrane structure and composition.

EXPERIMENTS

Given the complexities of bacterial membranes, we have used monolayers of the binary DPPG/TMCL mixture to mimic the cytoplasmic membrane of Gram-positive bacteria and the binary DPPG/DPPE mixture to mimic the cytoplasmic membrane of Gram-negative bacteria, where DPPG, TMCL and DPPE stand for 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol), 1',3'-bis[1,2-dimyristoyl-sn-glycero-3-phospho]-sn-glycerol, and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine, respectively. A Langmuir trough was specially designed to control the spread lipid monolayers and facilitate neutron reflectivity measurements.

FINDINGS

Surface pressure-area isotherm analysis revealed that all binary lipid systems mix non-ideally, but mixing is thermodynamically favoured. An increase in the surface pressure encourages demixing, resulting in phase separation and formation of clusters. Neutron reflectivity measurements were undertaken to study the binding of an antimicrobial peptide G(IIKK)₄-I-NH₂ (G₄) to the binary DPPG/TMCL and DPPG/DPPE monolayer mixtures at the molar ratios of 6/4 and 3/7, respectively. The results revealed stronger binding and penetration of G₄ to the DPPG/TMCL monolayer, indicating greater affinity of the antimicrobial peptide due to the electrostatic interaction and more extensive penetration into the more loosely packed lipid film. This work helps explain how AMPs attack different bacterial membranes, and the results are discussed in the context of other lipid models and antibacterial studies.

Improved prediction and characterization of anticancer activities of peptides using a novel flexible scoring card method

As anticancer peptides (ACPs) have attracted great interest for cancer treatment, several approaches based on machine learning have been proposed for ACP identification. Although existing methods have afforded high prediction accuracies, however such models are using a large number of descriptors together with complex ensemble approaches that consequently leads to low interpretability and thus poses a challenge for biologists and biochemists. Therefore, it is desirable to develop a simple, interpretable and efficient predictor for accurate ACP identification as well as providing the means for the rational design of new anticancer peptides with promising potential for clinical application. Herein, we propose a novel flexible scoring card method (FSCM) making use of propensity scores of local and global sequential information for the development of a sequence-based ACP predictor (named iACP-FSCM) for improving the prediction accuracy and model interpretability. To the best of our knowledge, iACP-FSCM represents the first sequence-based ACP predictor for rationalizing an in-depth understanding into the molecular basis for the enhancement of anticancer activities of peptides via the use of FSCM-derived propensity scores. The independent testing results showed that the iACP-FSCM provided accuracies of 0.825 and 0.910 as evaluated on the main and alternative datasets, respectively. Results from comparative benchmarking demonstrated that iACP-FSCM could outperform seven other existing ACP predictors with marked improvements of 7% and 17% for accuracy and MCC, respectively, on the main dataset. Furthermore, the iACP-FSCM (0.910) achieved very comparable results to that of the state-of-the-art ensemble model AntiCP2.0 (0.920) as evaluated on the alternative dataset. Comparative results demonstrated that iACP-FSCM was the most suitable choice for ACP identification and characterization considering its simplicity, interpretability and generalizability. It is highly anticipated that the iACP-FSCM may be a robust tool for the rapid screening and identification of promising ACPs for clinical use.

How do Self-Assembling Antimicrobial Lipopeptides Kill Bacteria?

Antimicrobial peptides are promising alternatives to traditional antibiotics. A group of self-assembling lipopeptides was formed by attaching an acyl chain to the N-terminus of α-helix-forming peptides with the sequence C_x-G(IIKK)_yI-NH₂ (C_xG_y, x = 4-12 and y = 2). C_xG_y self-assemble into nanofibers above their critical aggregation concentrations (CACs). With increasing x, the CACs decrease and the hydrophobic interactions increase, promoting secondary structure transitions within the nanofibers. Antimicrobial activity, determined by the minimum inhibition concentration (MIC), also decreases with increasing x, but the MICs are significantly smaller than the CACs, suggesting effective bacterial membrane-disrupting power. Unlike conventional antibiotics, both C₈G₂ and C₁₂G₂ can kill Staphylococcus aureus and Escherichia coli after only minutes of exposure under the concentrations studied. C₁₂G₂ nanofibers have considerably faster killing dynamics and lower cytotoxicity than their nonaggregated monomers. Antimicrobial activity of peptide aggregates has, to date, been underexploited, and it is found to be a very promising mechanism for peptide design. Detailed evidence for the molecular mechanisms involved is provided, based on superresolution fluorescence microscopy, solid-state nuclear magnetic resonance, atomic force microscopy, neutron scattering/reflectivity, circular dichroism, and Brewster angle microscopy.

Low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, wound healing, anticancer, drug delivery, bioimaging and 3D bioprinting applications

In this review, we have focused on the design and development of low molecular weight self-assembling peptide-based materials for various applications including cell proliferation, tissue engineering, antibacterial, antifungal, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting. The first part of the review describes about stimuli and various noncovalent interactions, which are the key components of various self-assembly processes for the construction of organized structures. Subsequently, the chemical functionalization of the peptides has been discussed, which is required for the designing of self-assembling peptide-based soft materials. Various low molecular weight self-assembling peptides have been discussed to explain the important structural features for the construction of defined functional nanostructures. Finally, we have discussed various examples of low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting applications.

Aggregated Amphiphilic Antimicrobial Peptides Embedded in Bacterial Membranes

Molecular dynamics (MD) simulations, stochastic optical reconstruction microscopy (STORM), and neutron reflection (NR) were combined to explore how antimicrobial peptides (AMPs) can be designed to promote the formation of nanoaggregates in bacterial membranes and impose effective bactericidal actions. Changes in the hydrophobicity of the designed AMPs were found to have a strong influence on their bactericidal potency and cytotoxicity. G(IIKK)₃I-NH₂ (G₃) achieved low minimum inhibition concentrations (MICs) and effective dynamic kills against both antibiotic-resistant and -susceptible bacteria. However, a G₃ derivative with weaker hydrophobicity, KI(KKII)₂I-NH₂ (KI), exhibited considerably lower membrane-lytic activity. In contrast, the more hydrophobic G(ILKK)₃L-NH₂ (GL) peptide achieved MICs similar to those observed for G₃ but with worsened hemolysis. Both the model membranes studied by Brewster angle microscopy, zeta potential measurements, and NR and the real bacterial membranes examined with direct STORM contained membrane-inserted peptide aggregates upon AMP exposure. These structural features were well supported by MD simulations. By revealing how AMPs self-assemble in microbial membranes, this work provides important insights into AMP mechanistic actions and allows further fine-tuning of antimicrobial potency and cytotoxicity.

The Best Peptidomimetic Strategies to Undercover Antibacterial Peptides

Health-care systems that develop rapidly and efficiently may increase the lifespan of humans. Nevertheless, the older population is more fragile, and is at an increased risk of disease development. A concurrently growing number of surgeries and transplantations have caused antibiotics to be used much more frequently, and for much longer periods of time, which in turn increases microbial resistance. In 1945, Fleming warned against the abuse of antibiotics in his Nobel lecture: "The time may come when penicillin can be bought by anyone in the shops. Then there is the danger that the ignorant man may easily underdose himself and by exposing his microbes to non-lethal quantities of the drug make them resistant". After 70 years, we are witnessing the fulfilment of Fleming's prophecy, as more than 700,000 people die each year due to drug-resistant diseases. Naturally occurring antimicrobial peptides protect all living matter against bacteria, and now different peptidomimetic strategies to engineer innovative antibiotics are being developed to defend humans against bacterial infections.

Dual Mode of Anti-Biofilm Action of G3 against Streptococcus mutans

Oral biofilms, formed by multiple microorganisms and their extracellular polymeric substances, seriously affect people's life. The emergence of the resistance of biofilms to conventional antibiotics and their side effects on the oral cavity have posed a great challenge in the treatment of dental diseases. Recently, antimicrobial peptides have been recognized as promising alternatives to conventional antibiotics due to their broad antibacterial spectrum, high antibacterial activity, and specific mechanism. However, the research of their anti-biofilm behaviors is still in its infancy, and the underlying mechanism remains unclear. In this study, we investigated the anti-biofilm activities of a designed helical peptide (G3) against Streptococcus mutans (S. mutans), one of the primary causative pathogens of caries. The results indicated that G3 inhibited S. mutans biofilm formation by interfering with different stages of biofilm development. At the initial stage, G3 inhibited the bacterial adhesion by decreasing the bacterial surface charges, hydrophobicity, membrane integrity, and adhesion-related gene transcription. At the later stage, G3 interacted with extracellular DNA to destabilize the 3D architecture of mature biofilms and thus dispersed them. The high activity of G3 against S. mutans biofilms, along with its specific modes of action, endows it great application potential in preventing and treating dental plaque diseases.

Effects of Conventional Surfactants on the Activity of Designed Antimicrobial Peptide

In this article, the interaction between a designed antimicrobial peptide (AMP) G(IIKK)₃I-NH₂ (G₃) and four typical conventional surfactants (sodium dodecyl sulfonate (SDS), hexadecyl trimethyl ammonium bromide (C₁₆TAB), polyoxyethylene (23) lauryl ether (C₁₂EO₂₃), and tetradecyldimethylamine oxide (C₁₄DMAO)) has been studied through surface tension measurement and circular dichroism (CD) spectroscopy. The antimicrobial activities of AMP/surfactant mixtures have also been studied with Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and the fungus Candida albicans. The cytotoxicity of the AMP/surfactant mixtures has also been assessed with NIH 3T3 and human skin fibroblast (HSF) cells. The surface tension data showed that the AMP/SDS mixture was much more surface-active than SDS alone. CD results showed that G₃ conformation changed from random coil, to β-sheet, and then to α-helix with increasing SDS concentration, showing a range of structural transformation driven by the different interactions with SDS. The antimicrobial activity of G₃ to Gram-negative and Gram-positive bacteria decreased in the presence of SDS due to the strong interaction of electrostatic attraction between the peptide and the surfactant. The interactions between G₃ and C₁₆TAB, C₁₂EO₂₃, and C₁₄DMAO were much weaker than SDS. As a result, the surface tension of surfactants with G₃ did not change much, neither did the secondary structures of G₃. The antimicrobial activities of G₃ were little affected in the presence of C₁₂EO₂₃, slightly improved by C₁₄DMAO, and clearly enhanced by cationic surfactant C₁₆TAB due to its strong cationic and antimicrobial nature, consistent with their surface physical activities as binary mixtures. Although AMP G₃ did not show activity to fungus, the mixtures of AMP/C₁₆TAB and AMP/C₁₄DMAO could kill C. albicans at high surfactant concentrations. The mixtures had rather high cytotoxicity to NIH 3T3 and HSF cells although G₃ is nontoxic to cells. Cationic AMPs can be formulated with nonionic, cationic, and zwitterionic surfactants during product development, but care must be taken when AMPs are formulated with anionic surfactants, as the strong electrostatic interaction may undermine their antimicrobial activity.

Modulation of Antimicrobial Peptide Conformation and Aggregation by Terminal Lipidation and Surfactants

The function and properties of peptide-based materials depend not only on the amino acid sequence but also on the molecular conformations. In this paper, we chose a series of peptides G_m(XXKK)_nX-NH₂ (m = 0, 3; n = 2, 3; X = I, L, and V) as the model molecules and studied the conformation regulation through N-terminus lipidation and their formulation with surfactants. The structural and morphological transition of peptide self-assemblies have also been investigated via transmission electron microscopy, atomic force microscopy, circular dichroism spectroscopy, and small-angle neutron scattering. With the terminal alkylation, the molecular conformation changed from random coil to β-sheet or α-helix. The antimicrobial activities of alkylated peptide were different. C₁₆-G₃(IIKK)₃I-NH₂ showed antimicrobial activity against Streptococcus mutans, while C₁₆-(IIKK)₂I-NH₂ and C₁₆-G₃(IIKK)₂I-NH₂ did not kill the bacteria. The surfactant sodium dodecyl sulfonate could rapidly induce the self-assemblies of alkylated peptides (C₁₆-(IIKK)₂I-NH₂, C₁₆-G₃(IIKK)₂I-NH₂, C₁₆-G₃(VVKK)₂V-NH₂) from nanofibers to micelles, along with the conformation changing from β-sheet to α-helix. The cationic surfactant hexadecyl trimethyl ammonium bromide made the lipopeptide nanofibers thinner, and nonionic surfactant polyoxyethylene (23) lauryl ether (C₁₂EO₂₃) induced the nanofibers much more intensively. Both the activity and the conformation of the α-helical peptide could be modulated by lipidation. Then, the self-assembled morphologies of alkylated peptides could also be further regulated with surfactants through hydrophobic, electrostatic, and hydrogen-bonding interactions. These results provided useful strategies to regulate the molecular conformations in peptide-based material functionalization.

Multiple Strategy Optimization of Specifically Targeted Antimicrobial Peptide Based on Structure-Activity Relationships to Enhance Bactericidal Efficiency

Unlike traditional broad-spectrum antibacterial agents, specifically targeted antimicrobial peptides (STAMPs) are difficult for bacteria to develop resistance to due to their unique membrane lytic mechanism. Additionally, STAMPs can maintain a normal ecological balance and provide long-term protection to the body. However, therapeutic applications of STAMPS are hindered by their weak activity and imperfect specificity, as well as lack of knowledge in understanding their structure-activity relationships. To investigate the effects of different parameters on the biological activities of STAMPs, a peptide sequence, WKKIWK^DPGIKKWIK, was truncated, extended, and provided with an increased charge and altered amphipathicity. In addition, a novel template modification method for attaching a phage-displayed peptide, which recognized and bound to Escherichia coli (E. coli) cells, to the end of the sequence was introduced. Compared with the traditional template modification method, peptide 13, which contained a phage-displayed peptide at the C-terminus, exhibited superior narrow-spectrum antibacterial activity against E. coli compared to that of parental peptide 2, and the activity and specificity of peptide 13 were increased by 5.0 and 2.4 times, respectively. Additionally, peptide 13 showed low cytotoxicity and relatively desirable salt, serum, acid, alkaline and heat stability. In this study, peptide 13 specifically killed E. coli by causing cytoplasmic membrane rupture and cytosol leakage. In summary, these findings are useful for improving the activity and specificity of STAMPs and show that peptide 13 is able to combat the growing threat of E. coli infections.

Therapeutic Potential of Trp-Rich Engineered Amphiphiles by Single Hydrophobic Amino Acid End-Tagging

End-tagging with a single hydrophobic residue contributes to improve the cell selectivity of antimicrobial peptides (AMPs), but systematic studies have been lacking. Thus, this study aimed to systematically investigate how end-tagging with hydrophobic residues at the C-terminus and Gly capped at the N-terminus of W4 (RWRWWWRWR) affects the bioactivity of W4 variants. Among all the hydrophobic residues, only Ala end-tagging improved the antibacterial activity of W4. Meanwhile, Gly capped at the N-terminus could promote the helical propensity of the end-tagged peptides in dodecylphosphocholine micelles, increasing their antimicrobial activities. Of these peptides, GW4A (GRWRWWWRWRA) showed the best antibacterial activity against the 19 species of bacteria tested (GM_MIC = 1.86 μM) with low toxicity, thus possessing the highest cell selectivity (TI_all = 137.63). It also had rapid sterilization, good salt and serum resistance, and LPS-neutralizing activity. Antibacterial mechanism studies showed that the short peptide GW4A killed bacteria by destroying cell membrane integrity and causing cytoplasmic leakage. Overall, these findings suggested that systematic studies on terminal modifications promoted the development of peptide design theory and provided a potential method for optimization of effective AMPs.

Hydrophobic Control of the Bioactivity and Cytotoxicity of de Novo-Designed Antimicrobial Peptides

Antimicrobial peptides (AMPs) can target bacterial membranes and kill bacteria through membrane structural damage and cytoplasmic leakage. A group of surfactant-like cationic AMPs was developed from substitutions to selective amino acids in the general formula of G(IIKK)₃I-NH₂, (called G₃, a de novo AMP), to explore the correlation between AMP hydrophobicity and bioactivity. A threshold surface pressure over 12 mN/m was required to cause measurable antimicrobial activity and this corresponded to a critical AMP concentration. Greater surface activity exhibited stronger antimicrobial activity but had the drawback of worsening hemolytic activity. Small unilamellar vesicles (SUVs) with specific lipid compositions were used to model bacterial and host mammalian cell membranes by mimicking the main structural determinants of the charge and composition. Leakage from the SUVs of encapsulated carboxyfluorescein measured by fluorescence spectroscopy indicated a negative correlation between hydrophobicity and model membrane selectivity, consistent with measurements of the zeta potential that demonstrated the extent of AMP binding onto model SUV lipid bilayers. Experiments with model lipid membranes thus explained the trend of minimum inhibitory concentrations and selectivity measured from real cell systems and demonstrated the dominant influence of hydrophobicity. This work provides useful guidance for the improvement of the potency of AMPs via structural design, whilst taking due consideration of cytotoxicity.

Light- and pH-Controlled Hierarchical Coassembly of Peptide Amphiphiles

The coassembly behavior of peptide amphiphiles (PAs) C₄-Bhc-EE-NH₂ and C₁₄-FKK-NH₂ has been investigated by transmission electron microscopy, atomic force microscopy, fluorescence microscopy, circular dichroism, Fourier transform infrared spectroscopy, and ¹H nuclear magnetic resonance. These two PAs coassembled into nanofibers by electrostatic and π-π stacking interactions at a low concentration and further aggregated into nanofiber bundles via charge complementation on the surface of nanofibers. As the charge number varied with pH, the bundles could be disassembled/assembled with pH regulation. More interestingly, as C₄-Bhc-EE-NH₂ was a photodegradable molecule, the bundles could also be responsive to both ultraviolet (UV) and near-infrared (NIR) light. In contrast to the reversible pH-dependent response, the light responses were irreversible as C₄-Bhc-EE-NH₂ broke under UV or NIR radiation. The highlight of this article is that structural changes were realized for control at the aggregate level, not only at the molecular level. With this inspiration, we hope that we can support the novel biomaterial construction and exploitation of new functions of biomaterials.

ACPred: A Computational Tool for the Prediction and Analysis of Anticancer Peptides

Anticancer peptides (ACPs) have emerged as a new class of therapeutic agent for cancer treatment due to their lower toxicity as well as greater efficacy, selectivity and specificity when compared to conventional small molecule drugs. However, the experimental identification of ACPs still remains a time-consuming and expensive endeavor. Therefore, it is desirable to develop and improve upon existing computational models for predicting and characterizing ACPs. In this study, we present a bioinformatics tool called the ACPred, which is an interpretable tool for the prediction and characterization of the anticancer activities of peptides. ACPred was developed by utilizing powerful machine learning models (support vector machine and random forest) and various classes of peptide features. It was observed by a jackknife cross-validation test that ACPred can achieve an overall accuracy of 95.61% in identifying ACPs. In addition, analysis revealed the following distinguishing characteristics that ACPs possess: (i) hydrophobic residue enhances the cationic properties of α-helical ACPs resulting in better cell penetration; (ii) the amphipathic nature of the α-helical structure plays a crucial role in its mechanism of cytotoxicity; and (iii) the formation of disulfide bridges on β-sheets is vital for structural maintenance which correlates with its ability to kill cancer cells. Finally, for the convenience of experimental scientists, the ACPred web server was established and made freely available online.

Antitumor Ability of KT2 Peptide Derived from Leukocyte Peptide of Crocodile Against Human HCT116 Colon Cancer Xenografts

BACKGROUND/AIM

Many antimicrobial peptides have been shown to have anticancer activity against human cancer cell lines. Cationic KT2 peptide, derived from white blood cell extract of Crocodylus siamensis has antibacterial activity and antitumor activity against human cervical cancer cells, but there are no data on the effect of KT2 peptide on tumor growth in vivo. The anticancer activity of KT2 peptide on human colon cancer xenografts was investigated in nude mice.

MATERIALS AND METHODS

Tumors in nude mice (BALB/c -nu/nu mice) were induced by subcutaneous injection with HCT116 cells. Twelve days after cancer cell xenograft, mice were treated by intratumoral injection with phosphate-buffered saline or KT2 peptide (25 and 50 mg/kg) once every 2 days for a total of four times and mice were sacrificed at 2 days after the last treatment.

RESULTS

KT2 peptide treatment did not lead to significant difference in mouse body weight among groups, but reduced both tumor volume and weight of colon cancer xenografts. Moreover, KT2 peptide increased the expression of apoptotic proteins, such as BCL2-associated X (BAX), cleaved caspase-3, and poly (ADP-ribose) polymerase and reduced that of BCL2 apoptosis regulator in xenograft tumors.

CONCLUSION

This finding suggests that KT2 peptide may inhibit tumor growth via apoptosis induction in this mouse model and supports the antitumor ability of KT2 peptide.

Arginine-Containing Surfactant-Like Peptides: Interaction with Lipid Membranes and Antimicrobial Activity

The activity of antimicrobial peptides stems from their interaction with bacterial membranes, which are disrupted according to a number of proposed mechanisms. Here, we investigate the interaction of a model antimicrobial peptide that contains a single arginine residue with vesicles containing model lipid membranes. The surfactant-like peptide Ala₆-Arg (A₆R) is studied in the form where both termini are capped (CONH-A₆R-NH₂, capA₆R) or uncapped (NH₂-A₆R-OH, A₆R). Lipid membranes are selected to correspond to model anionic membranes (POPE/POPG) resembling those in bacteria or model zwitterionic membranes (POPC/DOPC) similar to those found in mammalian cells. Viable antimicrobial agents should show activity against anionic membranes but not zwitterionic membranes. We find, using small-angle X-ray scattering (SAXS) and cryogenic-TEM (transmission electron microscopy) that, uniquely, capA₆R causes structuring of anionic membranes due to the incorporation of the peptide in the lipid bilayer with peptide β-sheet conformation revealed by circular dichroism spectroscopy (CD). There is a preferential interaction of the peptide with POPG (which is the only anionic lipid in the systems studied) due to electrostatic interactions and bidentate hydrogen bonding between arginine guanidinium and lipid phosphate groups. At a certain composition, this peptide leads to the remarkable tubulation of zwitterionic phosphatidylcholine (PC) vesicles, which is ascribed to the interaction of the peptide with the outer lipid membrane, which occurs without penetration into the membrane. In contrast, peptide A₆R has a minimal influence on the anionic lipid membranes (and no β-sheet peptide structure is observed) but causes thinning (lamellar decorrelation) of zwitterionic membranes. We also investigated the cytotoxicity (to fibroblasts) and antimicrobial activity of these two peptides against model Gram positive and Gram negative bacteria. A strong selective antimicrobial activity against Gram positive Listeria monocytogenes, which is an important food-borne pathogen, is observed for capA₆R. Peptide A₆R is active against all three studied bacteria. The activity of the peptides against bacteria and mammalian cells is related to the specific interactions uncovered through our SAXS, cryo-TEM, and CD measurements. Our results highlight the exquisite sensitivity to the charge distribution in these designed peptides and its effect on the interaction with lipid membranes bearing different charges, and ultimately on antimicrobial activity.

Dynamic studies of the interaction of a pH responsive, amphiphilic polymer with a DOPC lipid membrane

Deeper understanding of the molecular interactions between polymeric materials and the lipid membrane is important across a range of applications from permeation for drug delivery to encapsulation for immuno-evasion. Using highly fluidic microcavity supported lipid bilayers, we studied the interactions between amphiphilic polymer PP50 and a DOPC lipid bilayer. As the PP50 polymer is pH responsive the studies were carried out at pH 6.5, 7.05 and 7.5, corresponding to fully, partly protonated (pH = pK_a = 7.05) and fully ionized states of the polymer, respectively. Fluorescence correlation spectroscopy (FCS) using both labelled lipid and polymer revealed the PP50 associates with the bilayer interface across all pHs where its diffusion along the interface is impeded. Both FCS and electrochemical impedance spectroscopy (EIS) data indicate that the PP50 does not penetrate fully into the bilayer core but rather forms a layer at the bilayer aqueous interface reflected in increased resistance and decreased capacitance of the bilayer on PP50 binding. The extent of these effects and the dynamics of binding are influenced by pH, increasing with decreasing pH. These experimental trends concurred with coarse grained Monte Carlo simulations of polymer-bilayer interactions wherein a model hydrophilic polymer backbone grafted with side chains of varying hydrophobicity, to mimic the effect of varying pH, was simulated based on the bond fluctuation model with explicit solvent. Simulation results showed that with increasing hydrophobicity, the polymer penetrated deeper into the contacting bilayer leaflet of the membrane suppressing, consistent with EIS data, solvent permeation and that a full insertion of the polymer into the bilayer core is not necessary for suppression of permeability.