How Do Pseudocapacitors Store Energy? Theoretical Analysis and Experimental Illustration

A metal-organic framework-derived α-MnS/MWCNT composite as a promising pseudocapacitive material for a flexible quasi-solid-state asymmetric supercapacitor device

The low conductivity of traditionally used pseudocapacitive materials like transition metal oxides has forced researchers to look for alternative materials. Transition metal sulfides are being investigated as viable alternative materials and have shown promising results. In this work, an α-MnS/MWCNT composite is selected as the active material for supercapacitor application. α-MnS has better conductivity than many transition metal oxides but has an extremely low specific surface area (10.5 m2 g-1), which reduces its specific capacitance. Metal-organic framework (MOF)-derived materials are known to possess higher specific surface area and favorable pore size distribution. Herein, α-MnS/MWCNT composites are synthesized via two routes: the conventional solvothermal technique and the MOF route, and their performance is compared. It is proved that the α-MnS/MWCNT composite synthesized through the MOF route shows a favorable porous structure and better performance than the composite synthesized through the conventional route. It shows a specific surface area of 47.6 m2 g-1 and a specific capacitance of 546.3 F g-1 at 1 A g-1 with a mass loading of 1.5 mg cm-2 in 3 M KOH under a 3-electrode configuration. A flexible quasi-solid-state asymmetric supercapacitor device is fabricated with MOF-derived α-MnS/MWCNT as the positive electrode material, and the device achieved a potential window of 1.4 V, a specific capacitance of 82.5 F g-1 at 1 A g-1 and a capacitance retention of 90.1% after 5000 cycles at 10 A g-1. The results clearly indicate that transition metal sulfides like MOF-derived α-MnS can be a viable alternative to traditional materials like transition metal oxides. The assembled device has the potential to power flexible, wearable electronics.

Thermo-Electric Powered High Energy-Density Hybrid Supercapattery for Driving Overall Water Splitting: A Novel Trifunctional Builder for Self-Powered Hydrogen Production

Integrated electrochemical energy devices with multifunctionality are evolving as an auspicious way to lift up energy technology. However, the challenge is utilizing a single-electrode material for multifunctional applications is essential to minimize the manpower and overall cost of the system. Herein, a novel and cost-effective self-powered aqueous electrochemical energy device (SAEED) is proposed via integrating asymmetric supercapattery (ASD) and water-splitting (WS) devices utilizing Cu₃Mo₂O₉ (CMD) nanostructures on Ni-foam (prepared via hydrothermal method) as a trifunctional electrode. First, the Cu3Mo2O9/Ni electrode is examined for the supercapacitor, which shows the faradaic-type of charge-storage behavior with a superior specific capacity of 588.88 mAh g-1. The Cu3Mo2O9ǁgraphene ASD is constructed, which shows high energy storage performance with high device capacitance and energy/power densities and 98% retention capacitance over 5000 cycles. Second, the electrocatalyst behavior of the Cu₃Mo₂O₉/Ni electrode is explored, which reveals impressive HER/OER performance with lower overpotential (HER-120 mV at 10 mA cm⁻²/OER-310 mV at 50 mA cm⁻²) values. As a proof-of-concept, an SAEED was developed that contains a thermoelectric generator, Cu₃Mo₂O₉ǁgraphene ASD, and a beaker-type electrolyzer operating at a voltage of 1.58 V to eliminate power loss and intermittent issues for sustainable and uninterrupted production of H₂.

Single Crystalline Na0.67Ni0.33Mn0.67O2 Positive Electrode Material via Molten Salt Synthesis for Sodium Ion Batteries

P2-layered Na0.67Ni0.33Mn0.67O2 (NNMO) has emerged as a promising positive electrode material for sodium ion batteries due to its appealing electrochemical properties. Synthesis of polycrystalline NNMO (PC-NNMO) materials through conventional calcination of solid precursors remains the prevailing method, where heating occurs in a dry environment with air or O2. On the other hand, the molten salt method, where precursors are submerged in molten salt medium during calcination, emerged in recent years to be a scalable technique for more controlled crystal growth and uniform morphology in a variety of materials. Here, we utilize the molten salt method to synthesize single crystalline NNMO (SC-NNMO) materials with enhanced electrochemical properties. The SC-NNMO material exhibits an initial specific discharge capacity of 95 mAh g-1 at a 0.1C rate, retaining approximately 88.5% of its capacity after 100 cycles over a wide voltage range of 2.0-4.2 V. Furthermore, SC-NNMO maintains a capacity retention of 83.9% after 300 cycles at a 1C rate compared to 66.6% for PC-NNMO, indicating excellent long-term cycling stability. This stability is further confirmed by the performance of an SC-NNMO//hard carbon full cell, which retains 90.3% of its capacity after 200 cycles at 1C within a voltage window of 1.9-4.1 V. The enhancement in stability of the SC-NNMO sample is attributed to the single crystalline structure suppressing the undesired P2-O2 phase transition at high voltage. This study also presents an easy, efficient, and straightforward molten salt process for SC-NNMO material synthesis, offering valuable insights into the potential application of such methodology for the large-scale, cost-effective production of various sodium-layered transition metal oxide positive electrode materials for SIBs.

Advances in Graphene-Transition Metal Selenides Hybrid Materials for High-Performance Supercapacitors: A Review

Supercapacitors have attracted significant attention as energy storage devices due to their high power density, rapid charge-discharge capability, and long cycle life. Their performance is primarily influenced by electrode materials, electrolytes, and operational voltage windows. Among these, the development of advanced electrode materials is crucial for enhancing energy density, specific capacitance, and cyclic stability. This review focuses on recent advancements in graphene-based hybrid materials, particularly their integration with transition metal selenides (TMSs) for supercapacitor applications. Combining graphene and its derivatives with TMSs, which possess multiple oxidation states and high theoretical capacitance, results in hybrids with superior electrochemical performance. Studies show that these materials achieve higher specific capacitance, energy density, and power density compared to graphene composites with carbides, nitrides, phosphides, and oxides. Key findings include synthesis strategies, structural modifications, and electrochemical properties of graphene-TMS hybrids. Notably, these hybrids have demonstrated specific capacitances exceeding 3105 F/g at 1 A/g, power densities up to 5597.77 W/kg, and energy densities reaching 126.3 Wh/kg, making them highly promising for next-generation supercapacitors. This review critically evaluates the current state-of-the-art, explores the synergistic effects between graphene and TMSs, such as improved charge transfer kinetics and structural stability, and identifies challenges and future directions in graphene-TMS hybrid supercapacitors.

Importance of Morphology of Layered Double Hydroxide in Electrochemical Energy Storage and Catalysis

The development of nanomaterials for energy storage and conversion has always been important. Layered double hydroxide (LDH) is a promising material due to its high capacity, tunable composition and easy synthesis. In this work, the morphology of NiCo-LDH is tuned with surfactants including sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), and investigated the correlation between morphology and electrochemical properties. NiCo-LDH-SDS with a layered structure exhibited a specific capacitance of 1004 C g-1 at 1 A g-1, which is higher than that of the needle-like NiCo-LDH-CTAB (678 C g-1) and the rod-like NiCo-LDH (279 C g-1). Meanwhile, NiCo-LDH-SDS and NiCo-LDH-CTAB showed a reduction of 36 and 19 mV, respectively, in their overpotentials at 10 mA cm-2 compared to NiCo-LDH. Contact angle and adhesive force measurements proved the influence of morphology on the interfacial properties that layered structure is favorable for the timely detachment of the bubbles. Therefore, rational morphology regulation of LDH can effectively alter the gas-liquid-solid interface and thereby accelerate the reaction kinetics. The connections between morphologies, bubbles releasing and electrochemical performance are well established in this work, which can be applied in the investigation of nanomaterials for energy-related activities, especially the ones concerning bubbles releasing processes.

Three-component NiO/Fe3O4/rGO nanostructure as an electrode material towards supercapacitor and alcohol electrooxidation

A nanocomposite made of nickel oxide and iron oxide (NiO/Fe3O4) and its hybrid with reduced graphene oxide (rGO) as a conductive substrate with a highly functional surface (NiO/Fe3O4/rGO) was synthesized using a simple hydrothermal approach. This study addresses the challenge of developing efficient materials for energy storage and alcohol fuel cells. After confirming the synthesis through structural analysis, the potential of these nanocomposites as supercapacitor electrodes and catalysts for methanol and ethanol oxidation in alcohol fuel cells were evaluated. The synergy of combining the two metal oxides and adding rGO to the composite structure led to excellent electrocatalytic activity in alcohol oxidation. For the modified NiO/Fe3O4/rGO electrode in the methanol oxidation reaction (MOR), a current density of 450 mA/cm2 at 0.67 V and excellent catalyst stability of 98.7 % over 20 h in chronoamperometric analysis were observed. In the ethanol oxidation reaction (EOR), an oxidative current of 235 mA/cm2 at a peak potential of 0.76 V was seen, with catalyst stability of 96.4 % after 20 h. As a supercapacitor electrode, the NiO/Fe3O4 composite demonstrated a specific capacitance of 946 F/g, while NiO/Fe3O4/rGO showed 1155 F/g. The stability of these electrodes after 10000 GCD cycles was 83.6 % and 90.6 %, respectively. These findings suggest that the proposed structures are cost-effective and reliable alternatives for energy storage and production, suitable for alcohol fuel cells and supercapacitors.

Enhancing Energy Storage Capacity of 3D Carbon Electrodes Using Soft Landing of Molecular Redox Mediators

The incorporation of redox-active species into the electric double layer is a powerful strategy for enhancing the energy density of supercapacitors. Polyoxometalates (POM) are a class of stable, redox-active species with multielectron activity, which is often used to tailor the properties of electrochemical interfaces. Traditional synthetic methods often result in interfaces containing a mixture of POM anions, unreactive counter ions, and neutral species. This leads to degradation in electrochemical performance due to aggregation and increased interfacial resistance. Another significant challenge is achieving the uniform and stable anchoring of POM anions on substrates to ensure the long-term stability of the electrochemical interface. These challenges are addressed by developing a mass spectrometry-based subambient deposition strategy for the selective deposition of POM anions onto engineered 3D porous carbon electrodes. Furthermore, positively charged functional groups are introduced on the electrode surface for efficient trapping of POM anions. This approach enables the deposition of purified POM anions uniformly through the pores of the 3D porous carbon electrode, resulting in unprecedented increase in the energy storage capacity of the electrodes. The study highlights the critical role of well-defined electrochemical interfaces in energy storage applications and offers a powerful method to achieve this through selective ion deposition.

Plasticised chitosan: Dextran polymer blend electrolyte for energy harvesting application: Tuning the ion transport and EDLC charge storage capacity through TiO2 dispersion

This study investigates the performance of biopolymer electrolytes based on chitosan and dextran for energy storage applications. The optimization of ion transport and performance of electric double-layer capacitors EDCL using these electrolytes, incorporating different concentrations of glycerol as a plasticizer and TiO2 as nanoparticles, is explored. Impedance measurements indicate a notable reduction in charge transfer resistance with the addition of TiO2. DC conductivity estimates from AC spectra plateau regions reach up to 5.6 × 10-4 S/cm. The electric bulk resistance Rb obtained from the Nyquist plots exhibits a substantial decrease with increasing plasticizer concentration, further enhanced by the addition of the nanoparticles. Specifically, Rb decreases from ∼20 kΩ to 287 Ω when glycerol concentration increases from 10 % to 40 % and further drops to 30 Ω with the introduction of TiO2. Specific capacitance obtained from cyclic voltammetry shows a notable increase as the scan rate decreases, indicating improved efficiency and stability of ion transport. The TiO2-enriched EDCL achieves 12.3 F/g specific capacitance at 20 mV/s scan rate, with high ion conductivity and extended electrochemical stability. These results suggest the great potential of plasticizer and TiO2 with biopolymers in improving the performance of energy storage systems.

Large-Scale Production and Integrated Application of Micro-Supercapacitors

Micro-supercapacitors, emerging as promising micro-energy storage devices, have attracted significant attention due to their unique features. This comprehensive review focuses on two key aspects: the scalable fabrication of MSCs and their diverse applications. The review begins by elucidating the energy storage mechanisms and guiding principles for designing high-performance devices. It subsequently explores recent advancements in scalable fabrication techniques for electrode materials and micro-nano fabrication technologies for micro-devices. The discussion encompasses critical application domains, including multifunctional MSCs, energy storage integration, integrated power generation, and integrated applications. Despite notable progress, there are still some challenges such as large-scale production of electrode material, well-controlled fabrication technology, and scalable integrated manufacture. The summary concludes by emphasizing the need for future research to enhance micro-supercapacitor performance, reduce production costs, achieve large-scale production, and explore synergies with other energy storage technologies. This collective effort aims to propel MSCs from laboratory innovation to market viability, providing robust energy storage solutions for MEMS and portable electronics.

Ion-Electron Transduction Layer of the SnS2-MoS2 Heterojunction to Elevate Superior Interface Stability for All-Solid Sodium-Ion Selective Electrode

The high selectivity and fast ion response of all-solid sodium ion selective electrodes were widely applied in human sweat analysis. However, the potential drift due to insufficient interfacial capacitance leads to the deterioration of its stability and ultimately affects the potential accuracy of ion analysis. Designing a novel ion-electron transduction layer between the electrode and the ion selective membrane is an effective method to stabilize the interfacial potential. Herein, the SnS2-MoS2 heterojunction material was constructed by doping Sn in MoS2 nanosheets and used as the ion electron transduction layers of an all-solid sodium ion selective electrode for the first time, achieving the stable and efficient detection of Na+ ions. The proposed electrode exhibited a Nernst slope of 57.86 mV/dec for the detection of Na+ ions with a detection limit of 10-5.7 M in the activity range of 10-6-10-1 M. Via the electronic interaction at the heterojunction interfaces between SnS2 and MoS2 materials, the micro-nanostructure of the SnS2-MoS2 heterojunction was changed and SnS2-MoS2 as the ion-electron transduction layer acquired excellent capacitance (699 μF) and hydrophobicity (132°), resulting in a long-term potential stability of 1.37 μV/h. It was further proved that the large capacitance and high hydrophobicity of the ion-electron transduction layer are primary reasons for the excellent stability of the all-solid sodium ion selective electrode toward Na+ ions.

Demonstration of the threshold-switching memory devices using EMIm(AlCl3)Cl and ZnO for neuromorphic applications

The threshold-switching behaviors of the synapses lead to energy-efficient operation in the neural computing system. Here, we demonstrated the threshold-switching memory devices by inserting the ZnO layer into the ionic synaptic devices. The EMIm(AlCl3)Cl is utilized as the electrolyte because its conductance can be tuned by the charge states of the Al-based ions. The redox reactions of the Al ions in the electrolyte can lead to the analog resistive switching characteristics, such as excitatory postsynaptic current, paired-pulse facilitation, potentiation, and depression. By inserting the ZnO layer into the EMIm(AlCl3)-based ionic synaptic devices, the threshold switching behaviors are demonstrated. Using the resistivity difference between ZnO and EMIm(AlCl3)Cl, the analog resistive switching behaviors are tunned as the threshold-switching behaviors. The threshold-switching behaviors are achieved by applying the spike stimuli to the device. Demonstration of the threshold-switching behaviors of the ionic synaptic devices has a possibility to achieve high energy-efficiency for the ion-based artificial synapses.

N/O Co-doped hierarchical nanoporous biochar derived from waste polypropylene nonwoven for high-performance supercapacitors

How to efficiently treat municipal solid waste (MSW) has become one of the critical solutions in response to the call for "carbon neutrality". Here, the waste polypropylene nonwoven fabric of waste diapers was converted into hierarchical nanoporous biochar (HPBC) through pre-carbonization and activation processes as an ideal precursor for supercapacitors (SCs) with excellent performance. The prepared HPBC-750-4 with an ultrahigh specific surface area (3838.04 m2 g-1) and abundant heteroatomic oxygen (13.25%) and nitrogen (1.16%) codoped porous biochar structure. Given its structural advantages, HPBC-750-4 achieved a specific capacitance of 340.9 F g-1 at a current density of 1 A g-1 in a three-electrode system. Its capacitance retention rate was above 99.2% after 10 000 cycles at a current density of 10 A g-1, which indicated an excellent rate capability and long-term cycling stability. Furthermore, the HPBC-750-4//HPBC-750-4 symmetric SC exhibited a superb energy density of 10.02 W h kg-1 with a power density of 96.15 W kg-1 in a 6 M KOH electrolyte. This work not only demonstrates the enormous potential of waste polypropylene nonwoven fabric in the SC industry but also provides an economically feasible means of managing MSW.

Electrochemical Performance of Corn Waste Derived Carbon Electrodes Based on the Intrinsic Biomass Properties

The exploration of cost-effective and sustainable biomass-derived carbon materials as electrodes for energy conversion and storage has gained extensive attention in recent research studies. However, the selection of the biomass and the electrochemical performance regulation of the derived biochar, as well as their interrelationship still remain challenging for practical application. Herein, corn wastes with high carbon content (>40%), corn cob and corn silk, were selected as precursors for the preparation of high value-added and high yield carbon materials via a modified synthetic process. Uniquely, this work put emphasis on the theoretical and experimental investigations of how the biomass properties influence the composition and nanostructure regulation, the electrolyte ion adsorption free energy, and the electrical conductivity of the derived carbon materials as well as their electrochemical performance optimization. Owing to the favorable specific surface area, the hierarchical porous structure, and the diverse elemental distribution, corn cob and corn silk derived carbon materials (CBC and SBC) present great potential as promising electrodes for alkaline aqueous zinc batteries and supercapacitors. The assembled CBC//Zn and SBC//Zn zinc batteries deliver high energy densities of 63.0 Wh kg^-1 and 39.1 Wh kg^-1 at a power density of 575 W kg^-1, with excellent cycling performance of 91.1% and 84.3% capacitance retention after 10,000 cycles. As for the assembled symmetric supercapacitors, high energy densities of 14.9 Wh kg^-1 and 13.6 Wh kg^-1, and superior long-term cycling stability of 99.3% and 96.6% capacitance retention after 20,000 cycles could be achieved. This study highlights the advantages of utilizing corn cob and corn silk as carbon sources on the designed synthesis of carbon electrodes, and presents a meaningful perspective in the investigation of biomass-derived carbon materials and their potential applications in rechargeable devices.

Recent advances in polyaniline-based micro-supercapacitors

The rapid development of the Internet of Things (IoTs) and proliferation of wearable electronics have significantly stimulated the pursuit of distributed power supply systems that are small and light. Accordingly, micro-supercapacitors (MSCs) have recently attracted tremendous research interest due to their high power density, good energy density, long cycling life, and rapid charge/discharge rate delivered in a limited volume and area. As an emerging class of electrochemical energy storage devices, MSCs using polyaniline (PANI) electrodes are envisaged to bridge the gap between carbonaceous MSCs and micro-batteries, leading to a high power density together with improved energy density. However, despite the intensive development of PANI-based MSCs in the past few decades, a comprehensive review focusing on the chemical properties and synthesis of PANI, working mechanisms, design principles, and electrochemical performances of MSCs is lacking. Thus, herein, we summarize the recent advances in PANI-based MSCs using a wide range of electrode materials. Firstly, the fundamentals of MSCs are outlined including their working principle, device design, fabrication technology, and performance metrics. Then, the working principle and synthesis methods of PANI are discussed. Afterward, MSCs based on various PANI materials including pure PANI, PANI hydrogel, and PANI composites are discussed in detail. Lastly, concluding remarks and perspectives on their future development are presented. This review can present new ideas and give rise to new opportunities for the design of high-performance miniaturized PANI-based MSCs that underpin the sustainable prosperity of the approaching IoTs era.

Enhanced electricity generation and storage by nitrogen-doped hierarchically porous carbon modification of the capacitive bioanode in microbial fuel cells

Microbial fuel cells (MFCs) can potentially be utilized for power generation, but their low power density and low energy storage capabilities remain major bottlenecks for their large-scale development. In this research, a simplistic nitrogen-doped hierarchically porous carbon material (HPC-A) was developed through a one-step carbonization and activation process and was successfully hot-pressed on the carbon cloth (CC) substrate. This process fabricates capacitive bioanodes (HPC-A-CC) that can enhance electricity generation and storage in MFCs. The as-prepared HPC-A-CC anode delivered a power density of 2043.6 mW·m^-2 and a cumulative total charge (Q_m) of 426.4 ± 13.4C·m^-2 at each cycle, which was 2.1 and 34.8 times higher than that of the plain CC anode, respectively. This was a result of the hierarchical and interconnected porous structure, improved hydrophilic surface, and increased number of active centers which host the bacteria for enhanced electron transfer. Electrochemical measurements indicated the superior electrochemical activity and capacitive behavior of the HPC-A-CC anode. Furthermore, biofilm analysis revealed that the HPC-A-CC biofilm exhibited higher cell viability and a more uniform spatial distribution. These findings not only demonstrate the potential of HPC-A-CC for power enhancement in MFCs but also provide a feasible solution to the problem of power generation and demand mismatch in MFC applications.

β-NaVO3 as a pseudocapacitive anode material for sodium-ion batteries

A NaVO3/Gr composite exhibits enhanced electrochemical performance in SIB.

Electronic properties of lithium-ion battery cathodes studied in ion-gated transistor configuration

Electronic and ionic transport governs lithium-ion battery (LIB) operation. The in operando study of electronic transport in lithium-ion transition metal oxide (LMOx) cathodes at different states of charge enables the evaluation of the state of health of LIBs and the optimization of their performance. We report on electronic transport in LIB cathode materials at different states of charge controlled in operando in ion-gated transistor (IGT) configuration. We considered LiNi_0.5Mn_0.3Co_0.2O₂ (NMC532)- and LiMn_1.5Ni_0.5O₄ (LNMO)-based composite materials formulated like in conventional LIB cathodes and operated in the organic electrolyte LP30 (1M LiPF₆ in ethylene carbonate:dimethyl carbonate 1:1 v/v). NMC532- and LNMO-based cathode materials were used as the transistor channel materials and LP30 as the ion gating medium. Beyond its impact on the field of LIBs, our work advances the design of novel devices based on mixed ionic and electronic transport, including neuromorphic computing.

Electrochemical Behavior of Nanoporous Gold/Polypyrrole Supercapacitor under Deformation

Due to the high demand of wearable electronics, flexible supercapacitors have been extensively developed in recent years. Yet, the effect of deformation in the interior electrode material suffered in practical applications on the performance received less attention. Here, we study the electrochemical behavior of macroscopic nanoporous gold/polypyrrole (NPG/PPy) in situ under compression deformation. Dealloying-driven NPG, a network constructed by bi-continuous nano-scaled ligaments and pores, can serve as a compression-tolerant substrate for PPy supercapacitor material. The electrochemical capacitance of NPG/PPy subjected to compression deformation is revealed to decrease at the scan rates and discharge current densities applied in this work. At the same time, the charge transfer resistance of NPG/PPy is found to increase. This electrochemical behavior is due to the locally reduced mass transport of electrolyte caused by the formation of new connections between the neighboring ligaments under the application of compression loads. The fundamental understanding of the effect of deformation on the performance of energy storage materials revealed in this study paves the way for their practical application in wearable devices.

Electrochemical Proton Storage: From Fundamental Understanding to Materials to Devices

Simultaneously improving the energy density and power density of electrochemical energy storage systems is the ultimate goal of electrochemical energy storage technology. An effective strategy to achieve this goal is to take advantage of the high capacity and rapid kinetics of electrochemical proton storage to break through the power limit of batteries and the energy limit of capacitors. This article aims to review the research progress on the physicochemical properties, electrochemical performance, and reaction mechanisms of electrode materials for electrochemical proton storage. According to the different charge storage mechanisms, the surface redox, intercalation, and conversion materials are classified and introduced in detail, where the influence of crystal water and other nanostructures on the migration kinetics of protons is clarified. Several reported advanced full cell devices are summarized to promote the commercialization of electrochemical proton storage. Finally, this review provides a framework for research directions of charge storage mechanism, basic principles of material structure design, construction strategies of full cell device, and goals of practical application for electrochemical proton storage.

Conjugated Polyelectrolytes: Underexplored Materials for Pseudocapacitive Energy Storage

Conjugated polyelectrolytes (CPEs) are characterized by an electronically delocalized backbone bearing ionic functionalities. These features lead to properties relevant for use in energy-storing pseudocapacitor devices, including ionic conductivity, water processability, gel-formation, and formation of polaronic species stabilized by electrostatic interactions. In this Perspective, the basis for evaluating the figures of merit for pseudocapacitors is provided, together with the techniques used for their evaluation. The general utility and challenges encountered with neutral conjugated polymers are then discussed. Finally, recent advances on the use of CPEs in pseudocapacitor devices are reviewed. The article is concluded by discussing how their miscibility in aqueous media permits the incorporation of CPEs in living materials that are capable of switching function from extraction of energy from bacterial metabolic pathways to pseudocapacitor energy storage.

Effect of cobalt doping on the enhanced energy storage performance of 2D vanadium diselenide: experimental and theoretical investigations

Vanadium Diselenide (VSe₂) is a prominent candidate in the 2D transition metal dichalcogenides family for energy storage applications. Herein, we report the experimental and theoretical investigations on the effect of cobalt doping in 1T-VSe₂. The energy storage performance in terms of specific capacitance, stability and energy and power density is studied. It is observed that 3% Co doped VSe₂exhibits better energy storage performance as compared to other concentrations, with a specific capacitance of ∼193 F g^-1in a two-electrode symmetric configuration. First-principles Density Functional Theory based simulations support the experimental findings by suggesting an enhanced quantum capacitance value after the Co doping in the 1T-VSe₂. By making use of the advantages of the specific electrode materials, a solid state asymmetric supercapacitor (SASC) is also assembled with MoS₂as the negative electrode. The assembled Co-VSe₂//MoS₂SASC device shows excellent energy storage performance with a maximum energy density of 33.36 Wh kg^-1and a maximum power density of 5148 W kg^-1with a cyclic stability of 90% after 5000 galvano static charge discharge cycles.

Remote Plasma-Induced Synthesis of Self-Assembled MoS2/Carbon Nanowall Nanocomposites and Their Application as High-Performance Active Materials for Supercapacitors

The objective of this study is to investigate the synthesis and influence of MoS2 on carbon nanowalls (CNWs) as supercapacitor electrodes. The synthesis of MoS2 on CNW was achieved by the introduction of hydrogen remote plasma from ammonium tetrathiomolybdate (ATTM) without deterioration of the CNWs. The topographical surface structures and electrochemical characteristics of the MoS2–CNW composite electrodes were explored using two ATTM-dispersed organic solvents—acetonitrile and dimethylformamide (DMF). In this study, CNW and MoS2 were synthesized using an electron cyclotron resonance plasma. However, hydrogen radicals, which transform ATTM into MoS2, were provided in the form of a remote plasma source. The electrochemical performances of MoS2–CNW hybrid electrodes with various morphologies—depending on the solvent and ATTM concentration—were evaluated using a three-electrode system. The results revealed that the morphology of the synthesized MoS2 was influenced by the organic solvent used and affected both the electrochemical performance and topographical characteristics. Notably, considerable enhancement of the specific capacitance was observed for the MoS2 with open top edges synthesized from DMF. These encouraging results may motivate additional research on hybrid supercapacitor electrodes and the rapid synthesis of MoS2 and other transition metal dichalcogenides.

The role of the double layer for the pseudocapacitance of the hydrogen adsorption on platinum

Pseudocapacitances such as the hydrogen adsorption on platinum (HAoPt) are associated with faradaic chemical processes that appear as capacitive in their potentiodynamic response, which was reported to result from the kinetics of adsorption processes. This study discusses an alternative interpretation of the partly capacitive response of the HAoPt that is based on the proton transport of ad- or desorbed hydrogen in the double layer. Potentiodynamic perturbations of equilibrated surface states of the HAoPt lead to typical double layer responses with the characteristic resistive–capacitive relaxations that overshadow the fast adsorption kinetics. A potential-dependent double layer representation by a dynamic transmission line model incorporates the HAoPt in terms of capacitive contributions and can computationally reconstruct the charge exchanged in full range cyclic voltammetry data. The coupling of charge transfer with double layer dynamics displays a novel physicochemical theory to explain the phenomenon of pseudocapacitance and the mechanisms in thereon based supercapacitors.

Synthesis, Characterizations, and Electrochemical Performances of Highly Porous, Anhydrous Co0.5Ni0.5C2O4 for Pseudocapacitive Energy Storage Applications

Electrochemical energy storage relies essentially on the development of innovative electrode materials with enhanced kinetics of ion transport. Pseudocapacitors are excellent candidates to bridge the performance gap between supercapacitors and batteries. Highly porous, anhydrous Ni0.5Co0.5C2O4 is envisaged here as a potential electrode for pseudocapacitor applications, mainly because of its open pore framework structure, which poses inherent structural stability due to the presence of planar oxalate anions (C2O4 2-), and active participation of Ni2+/3+ and Co2+/3+ results in high intercalative charge storage capacity in the aqueous KOH electrolyte. The Ni0.5Co0.5C2O4 electrode shows specific capacitance equivalent to 2396 F/g at 1 A/g in the potential window of 0.6 V in the aqueous 2 M KOH electrolyte by galvanostatic charge/discharge experiments. Predominant pseudocapacitive mechanism seems to operative behind high charge storage due to active participation of Ni2+/3+ and Co2+/3+ redox couple as intercalative (inner) and surface (outer) charges stored by porous anhydrous Co0.5Ni0.5C2O4 were close to high 38 and 62% respectively. Further, in full cell asymmetric supercapacitors (ASCs) in which porous anhydrous Co0.5Ni0.5C2O4 was used as the positive electrode and activated carbon (AC) was utilized as the negative electrode, in the operating potential window 1.6 V, the highest specific energy of 283 W h/kg and specific power of ∼817 W/kg were achieved at 1 A/g current rates. Even at a very high power density of 7981 W/kg, the hybrid supercapacitor still attains an energy density of ∼75 W h/kg with high cyclic stability at a 10 A/g current rate. The detailed electrochemical studies confirm higher cyclic stability and a superior electrochemical energy storage property of porous anhydrous Co0.5Ni0.5C2O4, making it a potential pseudocapacitive electrode for large energy storage applications.

An understanding of a 3D hierarchically porous carbon modified electrode based on finite element modeling

A new strategy for the electrochemical evaluation of a 3D hierarchically porous carbon modified electrode is proposed via finite element modeling.

Dual-Ion Intercalation and High Volumetric Capacitance in a Two-Dimensional Non-Porous Coordination Polymer

Intercalation is a promising ion-sorption mechanism for enhancing the energy density of electrochemical capacitors (ECs) because it offers enhanced access to the electrochemical surface area. It requires a rapid transport of ions in and out of a host material, and it must occur without phase transformations. Materials that fulfil these requirements are rare; those that do intercalate almost exclusively cations. Herein, we show that Ni₃ (benzenehexathiol) (Ni₃ BHT), a non-porous two-dimensional (2D) layered coordination polymer (CP), intercalates both cations and anions with a variety of charges. Whereas cation intercalation is pseudocapacitive, anions intercalate in a purely capacitive fashion. The excellent EC performance of Ni₃ BHT provides a general basis for investigating similar dual-ion intercalation mechanisms in the large family of non-porous 2D CPs.

Free Energies of Proton-Coupled Electron Transfer Reagents and Their Applications

We present an update and revision to our 2010 review on the topic of proton-coupled electron transfer (PCET) reagent thermochemistry. Over the past decade, the data and thermochemical formalisms presented in that review have been of value to multiple fields. Concurrently, there have been advances in the thermochemical cycles and experimental methods used to measure these values. This Review (i) summarizes those advancements, (ii) corrects systematic errors in our prior review that shifted many of the absolute values in the tabulated data, (iii) provides updated tables of thermochemical values, and (iv) discusses new conclusions and opportunities from the assembled data and associated techniques. We advocate for updated thermochemical cycles that provide greater clarity and reduce experimental barriers to the calculation and measurement of Gibbs free energies for the conversion of X to XH_n in PCET reactions. In particular, we demonstrate the utility and generality of reporting potentials of hydrogenation, E°(V vs H₂), in almost any solvent and how these values are connected to more widely reported bond dissociation free energies (BDFEs). The tabulated data demonstrate that E°(V vs H₂) and BDFEs are generally insensitive to the nature of the solvent and, in some cases, even to the phase (gas versus solution). This Review also presents introductions to several emerging fields in PCET thermochemistry to give readers windows into the diversity of research being performed. Some of the next frontiers in this rapidly growing field are coordination-induced bond weakening, PCET in novel solvent environments, and reactions at material interfaces.

Graphene's Role in Emerging Trends of Capacitive Energy Storage

Technological breakthroughs in energy storage are being driven by the development of next-generation supercapacitors with favorable features besides high-power density and cycling stability. In this innovation, graphene and its derived materials play an active role. Here, the research status of graphene supercapacitors is analyzed. Recent progress is outlined in graphene assembly, exfoliation, and processing techniques. In addition, electrochemical and electrical attributes that are increasingly valued in next-generation supercapacitors are highlighted along with a summary of the latest research addressing chemical modification of graphene and its derivatives for future supercapacitors. The challenges and solutions discussed in the review hopefully will shed light on the commercialization of graphene and a broader genre of 2D materials in energy storage applications.

Effects of interlayer confinement and hydration on capacitive charge storage in birnessite

Nanostructured birnessite exhibits high specific capacitance and nearly ideal capacitive behaviour in aqueous electrolytes, rendering it an important electrode material for low-cost, high-power energy storage devices. The mechanism of electrochemical capacitance in birnessite has been described as both Faradaic (involving redox) and non-Faradaic (involving only electrostatic interactions). To clarify the capacitive mechanism, we characterized birnessite's response to applied potential using ex situ X-ray diffraction, electrochemical quartz crystal microbalance, in situ Raman spectroscopy and operando atomic force microscope dilatometry to provide a holistic understanding of its structural, gravimetric and mechanical responses. These observations are supported by atomic-scale simulations using density functional theory for the cation-intercalated structure of birnessite, ReaxFF reactive force field-based molecular dynamics and ReaxFF-based grand canonical Monte Carlo simulations on the dynamics at the birnessite-water-electrolyte interface. We show that capacitive charge storage in birnessite is governed by interlayer cation intercalation. We conclude that the intercalation appears capacitive due to the presence of nanoconfined interlayer structural water, which mediates the interaction between the intercalated cation and the birnessite host and leads to minimal structural changes.

Synthesis, characterizations and electrochemical performances of anhydrous CoC2O4 nanorods for pseudocapacitive energy storage applications

To overcome the environmental challenges caused by utilization of fossil fuel based energy technologies and to utilize the full potential of renewable energy sources such as solar, wind and tidal, high power and high energy density containing large scale electrochemical energy storage devices are a matter of concern and a need of the hour. Pseudocapacitors with accessibility to multiple oxidation states for redox charge transfer can achieve a higher degree of energy storage density compared to electric double layer capacitors (EDLC) and the hybrid supercapacitor is one of the prominent electrochemical capacitors that can resolve the low energy density issues associated with EDLCs. Due to its open pore framework structure with superior structural stability and accessibility of Co2+/3+/4 redox states, porous anhydrous CoC2O4 nanorods are envisaged here as a potential energy storage electrode in a pseudo-capacitive mode. Superior specific capacitance equivalent to 2116 F g-1 at 1 A g-1 in the potential window of 0.3 V was observed for anhydrous CoC2O4 nanorods in aqueous 2 M KOH electrolyte. A predominant pseudo-capacitive mechanism seems to be operative behind the high charge storage at electrodes as intercalative (Inner) and surface (outer) charge storage contributions were found to be 75% and 25% respectively. Further, in full cell asymmetric supercapacitor (ASC) mode in which porous anhydrous CoC2O4 nanorods were used as positive electrodes and activated carbon (AC) was utilised as negative electrodes within an operating potential window of 1.3 V, a highest specific energy of W h kg-1 and specific power of ∼647 W kg-1 at 0.5 A g-1 current density were obtained with superior cycling stability. High cycling stability coupled with superior electrochemical storage properties make anhydrous CoC2O4 nanorods potential pseudo-capacitive electrodes for large scale energy storage applications.

Constructing a hierarchically structured KNi0.67Co0.33PO4·H2O-graphene hydrogel/Ni foam electrode for superior all-solid-state supercapacitor

A monolithic supercapacitor electrode of a KNi_0.67Co_0.33PO₄·H₂O-graphene composite hydrogel supported on Ni foam (KNCP-GH/NF) is first prepared by a one-step hydrothermal method, which achieves notable improvements in the electrode surface area and mass-loading of active materials. The KNCP-GH/NF electrode enjoys a hierarchical open-porous structure, where the KNCP-GH composite hydrogel fills in the voids in NF and the porous graphene hydrogel (GH) simultaneously provides a large support surface for growing active KNCP nanoflowers. Accordingly, the KNCP-GH/NF electrode exhibits a strikingly high capacity of 3240 mC cm^-2 (876 C g^-1) at 2 mA cm^-2 and a satisfactory rate performance with 78.3% retention at 100 mA cm^-2. Further, an all-solid-state asymmetric supercapacitor, constituted by using KNCP-GH/NF and Fe₂P/GH/NF as the cathode and anode, respectively, and PVA-KOH as the solid-state gel electrolyte, delivers a high energy density of 69.2 W h kg^-1 (3.9 mW h cm^-3) and a power density of 13 229 W kg^-1 (720 mW h cm^-3) as well as notable cyclability with 81.2% capacity retention after 10 000 charge/discharge cycles. These attractive performances suggest a promising potential for a hierarchically structured KNCP-GH/NF electrode for the high-performance energy storage application.

Enhancing Lithium-Storage Performance via Graphdiyne/Graphene Interface by Self-Supporting Framework Synthesized

The self-supporting graphdiyne/exfoliated graphene (GDY/EG) composites materials were prepared by the solvothermal method and applied as lithium-ion batteries (LIBs). Graphdiyne (GDY) is a new type of carbon allotrope with a natural macroporous structure, but its conductivity is poor. A small amount of highly conductive graphene can improve surface conductivity and facilitate electron transport. The layered GDY/graphene heterogeneous interface can reduce the electron aggregation polarization, enhance the ability to obtain electrons from the electrolyte, and form a more uniform solid-electrolyte interface (SEI) film. The structural performance and electrochemical performance have been systematically studied. The results showed that the GDY/EG composite electrode has a reversible capacity of 1253 mA h g^-1 after 600 cycles at a current density of 0.5 A g^-1. When the current density is 5 A g^-1, the GDY/EG composite electrode can still maintain a reversible capacity of 324 mA h g^-1 after 2000 cycles, and the electrode can still maintain a good morphology after recycling. GDY/EG has a high reversible capacity, excellent rate capability, and cycle stability. A small amount of EG and inner foam copper form a double-layer conductivity, which changes the storage method of lithium ions and facilitates the rapid diffusion of lithium ions.

Hybrid supercapacitors using electrodes from fibers comprising polymer blend-metal oxide composites with polymethacrylic acid as chelating agent

Hybrid supercapacitors (SCs) made of carbon-metal oxide composites are devices which combine the advantages of electric double layer capacitors and pseudocapacitors viz high energy density, high power density and high cyclability. This is best achieved when the pseudocapacitive components are uniform in size and distribution on the conducting carbon support. Electrodes mats, fabricated from carbonized electrospun fibers generated from solutions of polyacrylonitrile (PAN) as the carbon source, cobalt (III) acetylacetonate as a metal oxide precursor, and polymethacrylic acid (PMAA) as a metal oxide precursor carrier were utilized in coin cell SCs. Fibers without the PMMA carrier were prepared for comparison. XRD and TGA showed conversion of the cobalt precursor to a mixture of cobalt and cobalt oxide (Co₃O₄). When the PMAA carrier was used, specific capacitance increased from 68 F g^-1in PAN-Co₃O₄to 125 F g^-1in PAN-PMAA-Co₃O₄. The addition of PMAA to the system results in better uniformity, accessibility and dispersion of metal and metal oxide particles. Due to the relatively low surface area of carbonized samples, Co₃O₄nanoparticles are the primary contributors to charge storage. The fabricated fibers show an energy density of 8.9 at 750 W kg^-1, which is twice that of the fibers made without PMAA.

Physicochemical properties and performance of graphene oxide/polyacrylonitrile composite fibers as supercapacitor electrode materials

Graphene oxide derived from palm kernel shells (rGOPKS) and polyacrylonitrile (PAN) were electrospun into composite fiber mats and evaluated as supercapacitor electrode materials. Their morphologies and crystalline properties were examined, and chemical interactions between rGOPKS and PAN were investigated. The diameters of individual fibers in the rGOPKS/PAN composite mats ranged from 1.351 to 1506 μm and increased with increasing rGOPKS content. A broad peak centered near 23° in the X-ray diffraction (XRD) pattern of rGOPKS corresponded to the (002) planes in graphitic carbon. Characteristic rGOPKS and PAN peaks were observed in the XRD patterns of all the composite fibers, and their Fourier-transform infrared (FTIR) spectra indicated hydrogen bond formation between rGOPKS and PAN. The composite fiber mats had smooth and homogeneous surfaces, and they exhibited excellent flexibility and durability. Their electrochemical performance as electrodes was assessed, and a maximum specific capacitance of 203 F g-1 was achieved. The cycling stability of this electrode was excellent, and it retained over 90% of its capacitance after 5000 cycles. The electrode had an energy density of 17 W h kg-1 at a power density of 3000 W kg-1. Dielectric results showed a nanofiber composite dielectric constant of 72.3 with minor leakage current (tan δ) i.e., 0.33 at 51 Hz. These results indicate that the rGOPKS/PAN composite fibers have great promise as supercapacitor electrode materials.

Supersonically Sprayed Washable, Wearable, Stretchable, Hydrophobic, and Antibacterial rGO/AgNW Fabric for Multifunctional Sensors and Supercapacitors

Wearable electronic textiles are used in sensors, energy-harvesting devices, healthcare monitoring, human-machine interfaces, and soft robotics to acquire real-time big data for machine learning and artificial intelligence. Wearability is essential while collecting data from a human, who should be able to wear the device with sufficient comfort. In this study, reduced graphene oxide (rGO) and silver nanowires (AgNWs) were supersonically sprayed onto a fabric to ensure good adhesiveness, resulting in a washable, stretchable, and wearable fabric without affecting the performance of the designed features. This rGO/AgNW-decorated fabric can be used to monitor external stimuli such as strain and temperature. In addition, it is used as a heater and as a supercapacitor and features an antibacterial hydrophobic surface that minimizes potential infection from external airborne viruses or virus-containing droplets. Herein, the wearability, stretchability, washability, mechanical durability, temperature-sensing capability, heating ability, wettability, and antibacterial features of this metallized fabric are explored. This multifunctionality is achieved in a single fabric coated with rGO/AgNWs via supersonic spraying.