Core-Shell NiFe-LDH@NiFe-Bi Nanoarray: In Situ Electrochemical Surface Derivation Preparation toward Efficient Water Oxidation Electrocatalysis in near-Neutral Media

Formation and Stabilization of NiOOH by Introducing α-FeOOH in LDH: Composite Electrocatalyst for Oxygen Evolution and Urea Oxidation Reactions

NiOOH is considered as the most active intermediate during electrochemical oxidation reaction, however, it is hard to directly synthesize due to high oxidation energy. Herein, theoretical calculations predict that α-FeOOH enables a decline in formation energy and an improvement in stabilization of NiOOH in NiFe-based layered double hydroxide (LDH). Inspiringly, a composite composed of α-FeOOH and LDH is well-designed and successfully fabricated in hydrothermal treatment by adding extra Fe³⁺ resource, and stable NiOOH is obtained by the following electro-oxidation method. Benefiting from strong electron-capturing capability of α-FeOOH, it efficiently promotes charge redistribution around the Ni/Fe sites and activates Ni atoms of LDH, verified by X-ray photoelectron spectra (XPS) and X-ray absorption spectra (XAS). The d-band center is optimized that balances the absorption and desorption energy, and thus Gibbs free energy barrier is lowered dramatically toward oxygen evolution reaction (OER) and urea oxidation reaction (UOR), and finally showing an outstanding overpotential of 195 mV and a potential of 1.35 V at 10 mA cm^-2 , respectively. This study provides a novel strategy to construct highly efficient catalysts via the introduction of a new phase for complex multiple-electron reactions.

Advancing the extended roles of 3D transition metal based heterostructures with copious active sites for electrocatalytic water splitting

The replacement of noble metals with alternative electrocatalysts is highly demanded for water splitting. From the exploration of 3D -transition metal based heterostructures, engineering at the nano-level brought more enhancements in active sites with reduced overpotentials for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). However, recent developments in 3D transition metal based heterostructures like direct growth on external substrates (Ni foam, Cu foam) gave highly impressive activities and stabilities. Research needs to be focused on how the active sites can be enhanced further with 3D heterostructures of transition metals by studying them with various counterparts like hydroxides, layered double hydroxides and phosphides for empowering both OER and HER applications. This perspective covers the way to enlarge the utilization of 3D heterostructures successfully in terms of reduced overpotentials, highly exposed active sites, increased electrical conductivity, porosity and high-rate activity. From the various approaches of growth of transition metal based 3D heterostructures, it is easy to fine tune the active sites to have a viable production of hydrogen with less applied energy input. Overall, this perspective outlines a direction to increase the number of active sites on 3D transition metal based heterostructures by growing on 3D foams for enhanced water splitting applications.

NiFe-Layered Double Hydroxide Synchronously Activated by Heterojunctions and Vacancies for the Oxygen Evolution Reaction

The development of earth-abundant transition-metal-based electrocatalysts with bifunctional properties (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is crucial to commercial hydrogen production. In this work, layered double hydroxide (LDH)-zinc oxide (ZnO) heterostructures and oxygen vacancies are constructed synchronously by plasma magnetron sputtering of NiFe-LDH. Using the optimal conditions, ZnO nanoparticles are uniformly distributed on the NiFe-LDH nanoflowers, which are prepared uniformly on the three-dimensional porous Ni foam. In the LDH-ZnO heterostructures and oxygen vacancies, electrons are depleted at the Ni cations on the NiFe-LDH surface and the active sites change from Fe cations to Ni cations during OER. Our theoretical assessment confirms the change of active sites after the deposition of ZnO and reveals the charge-transfer mechanism. Owing to the significant improvement in the OER dynamics, overall water splitting can be achieved at only 1.603 V in 1 M KOH when the Ni/LDH-ZnO and Ni/LDH are used as the anode and cathode, respectively. The work reveals a novel design of self-supported catalytic electrodes for efficient water splitting and also provides insights into the surface modification of catalytic materials.

Interface Engineering of Binder-Free Earth-Abundant Electrocatalysts for Efficient Advanced Energy Conversion

Gas-involved electrocatalysts for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction are crucial for many clean and effective energy technologies. The interface chemistry of electrocatalysts plays an important role in the optimization of their catalytic activity and stability. However, these gas-involved reactions exhibit sluggish kinetics and complex reactions at triple-phase interfaces. Thus, interface engineering at multiscale levels plays a decisive role. Binder-free electrocatalysts have gained increasing popularity, owing to their enhanced electron transfer and improved mass diffusion. This Review summarizes the influence of binder-free electrocatalysts with optimized interfaces and emphasizes three key interfaces, including the electrocatalyst/substrate interface, the inner interface of the electrocatalyst, and the electrocatalyst/electrolyte/gas interface, which are integral to determining the properties of gas-involved electrocatalysts, including the electrical conductivity, intrinsic catalytic activity, and mass transfer behavior. Finally, prospects and future challenges for the further development of binder-free electrocatalysts are discussed.

Transition metal based heterogeneous electrocatalysts for the oxygen evolution reaction at near-neutral pH

The oxygen evolution reaction (OER) is considered as a major bottleneck of water splitting for hydrogen generation. It is highly desired to develop high performance OER catalysts in near-neutral operating environments because of mild corrosion and pollution. This review summarized the recent development of heterogeneous catalysts containing transition metals (TM) for the OER at near-neutral pH. Specifically, we focus on some effective strategies to achieve a high OER performance for TM (e.g., Co, Mn, Ni, Cu, Fe, and binary TM)-based catalysts in near-neutral media. The progress and perspectives are discussed, which might provide some insights into the rapid promotion of the electrocatalytic performance for future applications in hydrogen production.

2D Layered Double Hydroxide Nanosheets and Their Derivatives Toward Efficient Oxygen Evolution Reaction

Layered double hydroxides (LDHs) have attracted tremendous research interest in widely spreading applications. Most notably, transition-metal-bearing LDHs are expected to serve as highly active electrocatalysts for oxygen evolution reaction (OER) due to their layered structure combined with versatile compositions. Furthermore, reducing the thickness of platelet LDH crystals to nanometer or even molecular scale via cleavage or delamination provides an important clue to enhance the activity. In this review, recent progresses on rational design of LDH nanosheets are reviewed, including direct synthesis via traditional coprecipitation, homogeneous precipitation, and newly developed topochemical oxidation as well as chemical exfoliation of parent LDH crystals. In addition, diverse strategies are introduced to modulate their electrochemical activity by tuning the composition of host metal cations and intercalated counter-anions, and incorporating dopants, cavities, and single atoms. In particular, hybridizing LDHs with conductive components or in situ growing them on conductive substrates to produce freestanding electrodes can further enhance their intrinsic catalytic activity. A brief discussion on future research directions and prospects is also summarized.

Flexible 3D carbon cloth as a high-performing electrode for energy storage and conversion

High-performance energy storage and conversion devices with high energy density, power density and long-term cycling life are of great importance in current consumer electronics, portable electronics and electric vehicles. Carbon materials have been widely investigated and utilized in various energy storage and conversion devices due to their excellent conductivity, mechanical and chemical stability, and low cost. Abundant excellent reviews have summarized the most recent progress and future outlooks for most of the current prime carbon materials used in energy storage and conversion devices, such as carbon nanotubes, fullerene, graphene, porous carbon and carbon fibers. However, the significance of three-dimensional (3D) commercial carbon cloth (CC), one of the key carbon materials with outstanding mechanical stability, high conductivity and flexibility, in the energy storage and conversion field, especially in wearable electronics and flexible devices, has not been systematically summarized yet. In this review article, we present a careful investigation of flexible CC in the energy storage and conversion field. We first give a general introduction to the common properties of CC and the roles it has played in energy storage and conversion systems. Then, we meticulously investigate the crucial role of CC in typical electrochemical energy storage systems, including lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries and supercapacitors. Following a description of the wide application potential of CC in electrocatalytic hydrogen evolution, oxygen evolution/reduction, full-water splitting, etc., we will give a brief introduction to the application of CC in the areas of photocatalytically and photoelectrochemically induced solar energy conversion and storage. The review will end with a brief summary of the typical superiorities that CC has in current energy conversion and storage systems, as well as providing some perspectives and outlooks on its future applications in the field. Our main interest will be focused on CC-based flexible devices due to the inherent superiority of CC and the increasing demand for flexible and wearable electronics.

Enhancement of HER kinetics with RhNiFe for high-rate water electrolysis

The NiFeCHH is best for OER and poor for HER which by introducing Rh, showed total water splitting in KOH. It requires an ultra-low overpotential of just 36 mV at 50 mA cm⁻² for HERs and 286 mV at 50 mA cm⁻² for TWS.

Evaluating DNA Derived and Hydrothermally Aided Cobalt Selenide Catalysts for Electrocatalytic Water Oxidation

Electrocatalysts with engaging oxygen evolution reaction (OER) activity with lesser overpotentials are highly desired to have increased cell efficiency. In this work, cobalt selenide catalysts were prepared utilizing both wet-chemical route (CoSe and CoSe-DNA) and hydrothermal route (Co_0.85Se-hyd). In wet-chemical route, cobalt selenide is prepared with DNA (CoSe-DNA) and without DNA (CoSe). The morphological results in the wet-chemical route had given a clear picture that, with the assistance of DNA, cobalt selenide had formed as nanochains with particle size below 5 nm, while it agglomerated in the absence of DNA. The morphology was nano networks in the hydrothermally assisted synthesis. These catalysts were analyzed for OER activity in 1 M KOH. The overpotentials required at a current density of 10 mA cm^-2 were 352, 382, and 383 mV for Co_0.85Se-hyd, CoSe, and CoSe-DNA catalysts, respectively. The Tafel slope value was lowest for Co_0.85Se-hyd (65 mV/dec) compared to CoSe-DNA (71 mV/dec) and CoSe (80 mV/dec). The chronoamperometry test was studied for 24 h at a potential of 394 mV for Co_0.85Se-hyd and was found to be stable with a smaller decrease in activity. From the OER study, it is clear that Co_0.85Se was found to be superior to others. This kind of related study can be useful to design the catalyst with increased efficiency by varying the method of preparation.

Recent Advances in the Development of Water Oxidation Electrocatalysts at Mild pH

Developing anodic oxygen evolution reaction (OER) electrocatalysts with high catalytic activities is of great importance for effective water splitting. Compared with the water-oxidation electrocatalysts that are commonly utilized in alkaline conditions, the ones operating efficiently under neutral or near neutral conditions are more environmentally friendly with less corrosion issues. This review starts with a brief introduction of OER, the importance of OER in mild-pH media, as well as the fundamentals and performance parameters of OER electrocatalysts. Then, recent progress of the rational design of electrocatalysts for OER in mild-pH conditions is discussed. The chemical structures or components, synthetic approaches, and catalytic performances of the OER catalysts will be reviewed. Some interesting insights into the catalytic mechanism are also included and discussed. It concludes with a brief outlook on the possible remaining challenges and future trends of neutral or near-neutral OER electrocatalysts. It hopefully provides the readers with a distinct perspective of the history, present, and future of OER electrocatalysts at mild conditions.

A hierarchical Nb2O5@NiFe-MMO rod array, fabricated and used as a structured photocatalyst

Recently, using sunlight as a driving force with transitional metal oxides as photocatalysts, due to their unique optical and catalytic properties for organic reactions, has been considered to be a promising strategy in synthetic chemistry. Here, a hierarchically structured photocatalyst, a NiFe mixed metal oxide coated Nb2O5 (denoted as Nb2O5@NiFe-MMO) rod array has been successfully fabricated using Nb foil as a substrate. The Nb2O5 rod array was synthesized by the oxidative etching of Nb metal on the surface of the a substrate. The coating NiFe-MMO was obtained by the calcination of a NiFe layered double hydroxide (NiFe-LDH) precursor via the in situ epitaxial growing technique. The Nb2O5@NiFe-MMO rod array extended the photoresponse light region from ultraviolet light around 400 nm to visible light around 600 nm. With the well-designed architecture and highly dispersed NiO and Fe2O3, the as-prepared photocatalyst exhibited excellent activity and recyclability toward the reaction of aerobic coupling under relatively green conditions, with catalytic efficiency of 228 μmol cm-2 (the area is that of the Ni foil substrate) at 30 °C for 5 h. The present work provides a new strategy for the exploration of excellent structured photocatalysts based on transition metal oxide materials for selective aerobic oxidation of benzylamine to imine.

Cobalt tungsten oxide hydroxide hydrate (CTOHH) on DNA scaffold: an excellent bi-functional catalyst for oxygen evolution reaction (OER) and aromatic alcohol oxidation

CTOHH-DNA, a newly developed catalyst utilized for both electrocatalytic OER and aromatic alcohol oxidation reaction with excellent activities.

Spatially-controlled NiCo2O4@MnO2 core-shell nanoarray with hollow NiCo2O4 cores and MnO2 flake shells: an efficient catalyst for oxygen evolution reaction

Control of structures and components of the nanoarray catalysts is very important for electrochemical energy conversion. Herein, unique NiCo₂O₄@MnO₂ core-shell nanoarray with hollow NiCo₂O₄ Cores and MnO₂ flake shells is in situ fabricated on carbon textile via a two-step hydrothermal treatment followed by a subsequent annealing. The as-made nanoarray is highly active and durable catalyst for oxygen evolution reaction in alkaline media attribute to the synergetic effect derived from spatially separated nanoarray with favorable NiCo₂O₄ and MnO₂ compositions.

Nickel–copper bimetal organic framework nanosheets as a highly efficient catalyst for oxygen evolution reaction in alkaline media

NiCu MOF nanosheets on Ni foam (NiCu-MOFNs/NF) exhibit superior catalytic OER performance, needing an overpotential of 309 mV at 100 mA cm⁻² in 1.0 M KOH.

Anion-exchange synthesis of a nanoporous crystalline CoB2O4 nanowire array for high-performance water oxidation electrocatalysis in borate solution

Developing nanoporous nanoarray electrocatalysts for efficient water oxidation in environmentally benign media is highly desired but still remains a key challenge. In this communication, we report the fabrication of a nanoporous crystalline CoB₂O₄ nanowire array on Ti mesh (CoB₂O₄/TM) from a Co(OH)F nanowire array on Ti mesh (Co(OH)F/TM) via an anion-exchange reaction. As a three dimensional (3D) catalyst electrode for water oxidation, CoB₂O₄/TM exhibits superior catalytic activity and needs an overpotential of only 446 mV to drive a geometrical catalytic current density of 10 mA cm^-2 in 0.1 M potassium borate (pH = 9.2). Notably, this catalyst also shows strong long-term electrochemical durability with high turnover frequency values of 0.19 and 0.81 mol O₂ per s at overpotentials of 400 and 500 mV, respectively.

Electrochemical study of the promoting effect of Fe on oxygen evolution at thin ‘NiFe–Bi’ films and the inhibiting effect of Al in borate electrolyte

Adding Fe³⁺ or Al³⁺ to the electrolyte resulted in fast promotion or poisoning, respectively, of catalysis for oxygen evolution at nickel–borate, and both effects were accompanied with anodic shifts in the redox peaks with potential scanning.