Synthesis and Electrochemical Reaction of Tin Oxalate-Reduced Graphene Oxide Composite Anode for Rechargeable Lithium Batteries

High Pseudocapacitance-Driven CoC2 O4 Electrodes Exhibiting Superior Electrochemical Kinetics and Reversible Capacities for Lithium-Ion and Lithium-Sulfur Batteries

In this study, cuboid-like anhydrous CoC₂ O₄ particles (CoC₂ O₄ -HK) are synthesized through a potassium citrate-assisted hydrothermal method, which possess well-crystallized structure for fast Li⁺ transportation and efficient Li⁺ intercalation pseudocapacitive behaviors. When being used in lithium-ion batteries, the as-prepared CoC₂ O₄ -HK delivers a high reversible capacity (≈1360 mAh g^-1 at 0.1 A g^-1 ), good rate capability (≈650 mAh g^-1 at 5 A g^-1 ) and outstanding cycling stability (835 mAh g^-1 after 1000 cycles at 1 A g^-1 ). Characterizations illustrate that the Li⁺ -intercalation pseudocapacitance dominates the charge storage of CoC₂ O₄ -HK electrode, together with the reversible reaction of CoC₂ O₄ +2Li⁺ +2e^- →Co+Li₂ C₂ O₄ on discharging and charging. In addition, CoC₂ O₄ -HK particles are also used together with carbon-sulfur composite materials as the electrocatalysts for lithium-sulfur (Li-S) battery, which displays a gratifying sulfur electrochemistry with a high reversibility of 1021.5 mAh g^-1 at 2 C and a low decay rate of 0.079% per cycle after 500 cycles. The density functional theory (DFT) calculations show that CoC₂ O₄ /C can regulate the adsorption-activation of reaction intermediates and therefore boost the catalytic conversion of polysulfides. Therefore, this work presents a new prospect of applying CoC₂ O₄ as the high-performance electrode materials for rechargeable Li-ion and Li-S batteries.

Rod-like Ni0.5Co0.5C2O4·2H2O in-situ formed on rGO by an interface induced engineering: Extraordinary rate and cycle performance as an anode in lithium-ion and sodium-ion half/full cells

Transition metal oxalates have attracted wide attention due to the characteristics of the conversion reaction as anode materials in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), However, there are huge volume expansion and sluggish circulation dynamics during the reversible Li⁺ and Na⁺ insertion/extraction process, which would lead to unsatisfactory reversible capacity and stability. In order to solve these problems, a rod-like structure Ni_0.5Co_0.5C₂O₄·2H₂O is in-situ formed on the reduced graphene oxide layer (Ni_0.5Co_0.5C₂O₄·2H₂O/rGO) in a glycol-water mixture medium via an interface induced engineering strategy. Benefitting from the synergistic cooperation of nano-diameter rod-like structure and high conductive rGO networks, the experimental results show that the prepared Ni_0.5Co_0.5C₂O₄·2H₂O/rGO electrode has predominant rate performance and ultra-long cycle stability. For the LIBs, it not only exhibits an ultrahigh reversible capacity (1179.9 mA h g^-1 at 0.5 A g^-1 after 300 cycles), but also presents outstanding rate and cycling performance (646.5 mA h g^-1 at 5 A g^-1 after 1200 cycles). Besides, the Ni_0.5Co_0.5C₂O₄·2H₂O/rGO electrode displays remarkable sodium storage capacity of 221.6 mA h g^-1 after 100 cycles at 0.5 A g^-1. Further, the extraordinary electrochemical capability of Ni_0.5Co_0.5C₂O₄·2H₂O/rGO active material is also reflected in two full-cells, assembled using commercial LiCoO₂ as cathode for LIBs and commercial Na₃V₂(PO₄)₃ as cathode for SIBs, both of which can show wonderful specific capacity and cycling stability. It is found in in-situ Raman experiments that the reversible changes of oxalate peaks are monitored in a charge/discharge process, which is scientific evidence for the transform reaction mechanism of metal oxalates in LIBs. These findings not only provide important ideas for studying the charge/discharge storage mechanism but also give scientific basis for the design of high-performance electrode materials.

Synthesis of Nickel Fumarate and Its Electrochemical Properties for Li-Ion Batteries

Metal–organic frameworks (MOFs) have found a potential application in various domains such as gas storage/separation, drug delivery, catalysis, etc. Recently, they have found considerable attention for energy storage applications such as Li- and Na-ion batteries. However, the development of MOFs is plagued by their limited energy density that arises from high molecular weight and low volumetric density. The choice of ligand plays a crucial role in determining the performance of the MOFs. Here, we report a nickel-based one-dimensional metal-organic framework, NiC4H2O4, built from bidentate fumarate ligands for anode application in Li-ion batteries. The material was obtained by a simple chimie douce precipitation method using nickel acetate and fumaric acid. Moreover, a composite material of the MOF with reduced graphene oxide (rGO) was prepared to enhance the lithium storage performance as the rGO can enhance the electronic conductivity. Electrochemical lithium storage in the framework and the effect of rGO on the performance have been investigated by cyclic voltammetry, galvanostatic charge–discharge measurements, and EIS studies. The pristine nickel formate encounters serious capacity fading while the rGO composite offers good cycling stability with high reversible capacities of over 800 mAh g−1.

Understanding the High-Performance Anode Material of CoC2 O4 ⋅2 H2 O Microrods Wrapped by Reduced Graphene Oxide for Lithium-Ion and Sodium-Ion Batteries

Metal oxalate has become a most promising candidate as an anode material for lithium-ion and sodium-ion batteries. However, capacity decrease owing to the volume expansion of the active material during cycling is a problem. Herein, a rod-like CoC₂ O₄ ⋅2 H₂ O/rGO hybrid is fabricated through a novel multistep solvo/hydrothermal strategy. The structural characteristics of the CoC₂ O₄ ⋅2 H₂ O microrod wrapped using rGO sheets not only inhibit the volume variation of the hybrid electrode during cycling, but also accelerate the transfer of electrons and ions in the 3 D graphene network, thereby improving the electrochemical properties of CoC₂ O₄ ⋅2 H₂ O. The CoC₂ O₄ ⋅2 H₂ O/rGO electrode delivers a specific capacity of 1011.5 mA h g^-1 at 0.2 A g^-1 after 200 cycles for lithium storage, and a high capacity of 221.1 mA h g^-1 at 0.2 A g^-1 after 100 cycles for sodium storage. Moreover, the full cell CoC₂ O₄ ⋅2 H₂ O/rGO//LiCoO₂ consisting of the CoC₂ O₄ ⋅2 H₂ O/rGO anode and LiCoO₂ cathode maintains 138.1 mA h g^-1 after 200 cycles at 0.2 A g^-1 and has superior long-cycle stability. In addition, in situ Raman spectroscopy and in situ and ex situ X-ray diffraction techniques provide a unique opportunity to understand fully the reaction mechanism of CoC₂ O₄ ⋅2 H₂ O/rGO. This work also gives a new perspective and solid research basis for the application of metal oxalate materials in high-performance lithium-ion and sodium-ion batteries.

Nature-Derived Cellulose-Based Composite Separator for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are emerging power sources for the replacement of lithium-ion batteries. Recent studies have focused on the development of electrodes and electrolytes, with thick glass fiber separators (~380 μm) generally adopted. In this work, we introduce a new thin (~50 μm) cellulose–polyacrylonitrile–alumina composite as a separator for SIBs. The separator exhibits excellent thermal stability with no shrinkage up to 300°C and electrolyte uptake with a contact angle of 0°. The sodium ion transference number, tNa+, of the separator is measured to be 0.78, which is higher than that of bare cellulose (tNa+: 0.31). These outstanding physical properties of the separator enable the long-term operation of NaCrO₂ cathode/hard carbon anode full cells in a conventional carbonate electrolyte, with capacity retention of 82% for 500 cycles. Time-of-flight secondary-ion mass spectroscopy analysis reveals the additional role of the Al₂O₃ coating, which is transformed into AlF₃ upon long-term cycling owing to HF scavenging. Our findings will open the door to the use of cellulose-based functional separators for high-performance SIBs.

Synthesis of Co0.5 Mn0.1 Ni0.4 C2 O4 ⋅n H2 O Micropolyhedrons: Multimetal Synergy for High-Performance Glucose Oxidation Catalysis

Owing to the synergy between metals, trimetal oxalate micropolyhedrons have been synthesized by means of a room-temperature coprecipitation strategy. The effect of their nanoscale size on their electrochemical performance toward glucose oxidation was investigated. In particular, the Co_0.5 Mn_0.1 Ni_0.4 C₂ O₄ ⋅n H₂ O micropolyhedrons illustrated prominent electrocatalytic activity for the glucose oxidation reaction. Additionally, the Co_0.5 Mn_0.1 Ni_0.4 C₂ O₄ ⋅n H₂ O micropolyhedrons, when used as an electrode material, illustrated an excellent lower limit of detection (1.5 μm), a wide detection concentration range (0.5-5065.5 μm), and a high sensitivity (493.5 μA mm^-1  cm^-2 ). Further analysis indicated that the effectively improved conductivity may have been due to the small size of the materials, and it was easier to form a flat film when Nafion was coated onto the glassy carbon electrode.

Constructing Three-Dimensional Porous Carbon Framework Embedded with FeSe2 Nanoparticles as an Anode Material for Rechargeable Batteries

Metal selenides have caused widespread concern due to their high theoretical capacities and appropriate working potential; however, they suffer from large volume variation during cycling and low electrical conductivity, which limit their practical applications. In this article, a three-dimensional (3D) porous carbon framework embedded with homogeneous FeSe₂ nanoparticles (3D porous FeSe₂/C composite) was synthesized by a facile calcined approach, following a selenized method without a template. As the uniformity of FeSe₂ nanoparticles and 3D porous structure are beneficial to accommodate volume stress upon cycling and shorten electrons/ions transport path, associated with carbon as a buffer matrix for increasing conductivity, the 3D porous FeSe₂/C composite displays excellent electrochemical properties with high reversible capacities of 798.4 and 455.0 mA h g^-1 for lithium-ion batteries and sodium-ion batteries, respectively, when the current density is 100 mA g^-1 after 100 cycles. In addition, the as-prepared composite exhibits good cycling stability as compared to bare FeSe₂ nanoparticles. Therefore, the facile synthetic strategy in the current work provides a new perspective in constructing a high-performance anode.