Transparent Copper-Loaded Chitosan/Silica Antibacterial Coatings with Long-Term Efficacy

Smart Antibacterial Fabric Response to Sweat: Constructing Reversibly Switchable Surface by Zwitterionic Block Copolymers

Although various antibacterial fabrics have been extensively developed, smart antibacterial fabrics that can achieve stimulus responses have not been developed under high humidity conditions. In this study, a smart sweat-responsive antibacterial fabric has been designed by grafting zwitterionic PTMSPMA-co-PTMAO copolymer on cotton fabric (CF) to achieve "active attack" and "passive defense" against bacteria. It exhibits desirable antibacterial properties in both H2O and dry environments with the killing rates against Escherichia coli and Staphylococcus aureus reaching over 99.97%. Additionally, the fabric exhibits significant antiadhesion effects in sweat environments, with an antiadhesion rate above 99.95%. Various characterizations of PTMSPMA-co-PTMAO-CF reveal its smart responses in killing and antiadhesion of bacteria in high-humidity environments. In H2O, the oxygen-containing anions in PTMSPMA-co-PTMAO-CF interact with H2O via the hydrogen bond, exposing more -(CH3)2-N+ to kill the bacteria and enhance the "active attack." In sweat, ions (such as Na+ and Cl-) will be electrically neutralized with the quaternary ammonium cations (-(CH3)2-N+) and oxygen-containing anions in PTMSPMA-co-PTMAO-CF, thereby significantly enhancing the antiadhesion and exhibiting "passive defense" in high-humidity environments. PTMSPMA-co-PTMAO-CF can also achieve reversible conversion of killing and antiadhesion, according to variations in the external environments. This study provides new insight on smart antibacterial fabrics in the fields of health monitoring, sports equipment, and medical protection.

Antibacterial Inorganic Coating of Calcium Silicate Hydrate Substrates by Copper Incorporation

Under environmental conditions, biofilms can oftentimes be found on different surfaces, accompanied by the structural degradation of the substrate. Since high-copper-content paints were banned in the EU, a solution for the protection of these surfaces has to be found. In addition to hydrophobation, making the surfaces inherently biofilm-repellent is a valid strategy. We want to accomplish this via the metal exchange in calcium silicate hydrate (CSH) substrates with transition metals. As has been shown with Europium, even small amounts of metal can have a great influence on the material properties. To effectively model CSH surfaces, ultrathin CSH films were grown on silicon wafers using Ca(OH)2 solutions. Subsequently, copper was incorporated as an active component via ion exchange. Biofilm development is quantified using a multiple-resistant Pseudomonas aeruginosa strain described as a strong biofilm former cultivated in the culture medium for 24 h. Comprehensive structural and chemical analyses of the substrates are done by environmental scanning electron microscopy (ESEM), transmission Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Results do not show any structural deformation of the substrates by the incorporation of the Cu combined with three-dimensional (3D) homogeneous distribution. While the copper-free CSH phase shows a completely random distribution of the bacteria in biofilms, the samples with copper incorporation reveal lower bacterial colonization of the modified surfaces with an enhanced cluster formation.

A new strategy to minimize humidity influences on acoustic wave ultraviolet sensors using ZnO nanowires wrapped with hydrophobic silica nanoparticles

Surface acoustic wave (SAW) technology has been widely developed for ultraviolet (UV) detection due to its advantages of miniaturization, portability, potential to be integrated with microelectronics, and passive/wireless capabilities. To enhance UV sensitivity, nanowires (NWs), such as ZnO, are often applied to enhance SAW-based UV detection due to their highly porous and interconnected 3D network structures and good UV sensitivity. However, ZnO NWs are normally hydrophilic, and thus, changes in environmental parameters such as humidity will significantly influence the detection precision and sensitivity of SAW-based UV sensors. To solve this issue, in this work, we proposed a new strategy using ZnO NWs wrapped with hydrophobic silica nanoparticles as the effective sensing layer. Analysis of the distribution and chemical bonds of these hydrophobic silica nanoparticles showed that numerous C-F bonds (which are hydrophobic) were found on the surface of the sensitive layer, which effectively blocked the adsorption of water molecules onto the ZnO NWs. This new sensing layer design minimizes the influence of humidity on the ZnO NW-based UV sensor within the relative humidity range of 10-70%. The sensor showed a UV sensitivity of 9.53 ppm (mW/cm2)-1, with high linearity (R 2 value of 0.99904), small hysteresis (<1.65%) and good repeatability. This work solves the long-term dilemma of ZnO NW-based sensors, which are often sensitive to humidity changes.

Antibacterial and Antiviral Functional Materials: Chemistry and Biological Activity toward Tackling COVID-19-like Pandemics

The ongoing worldwide pandemic due to COVID-19 has created awareness toward ensuring best practices to avoid the spread of microorganisms. In this regard, the research on creating a surface which destroys or inhibits the adherence of microbial/viral entities has gained renewed interest. Although many research reports are available on the antibacterial materials or coatings, there is a relatively small amount of data available on the use of antiviral materials. However, with more research geared toward this area, new information is being added to the literature every day. The combination of antibacterial and antiviral chemical entities represents a potentially path-breaking intervention to mitigate the spread of disease-causing agents. In this review, we have surveyed antibacterial and antiviral materials of various classes such as small-molecule organics, synthetic and biodegradable polymers, silver, TiO2, and copper-derived chemicals. The surface protection mechanisms of the materials against the pathogen colonies are discussed in detail, which highlights the key differences that could determine the parameters that would govern the future development of advanced antibacterial and antiviral materials and surfaces.

Antimicrobial Copper-Based Materials and Coatings: Potential Multifaceted Biomedical Applications

Surface contamination by microbes leads to several detrimental consequences like hospital- and device-associated infections. One measure to inhibit surface contamination is to confer the surfaces with antimicrobial properties. Copper's antimicrobial properties have been known since ancient times, and the recent resurgence in exploiting copper for application as antimicrobial materials or coatings is motivated by the growing concern about antibiotic resistance and the pressure to reduce antibiotic use. Copper, unlike silver, demonstrates rapid and high microbicidal efficacy against pathogens that are in close contact under ambient indoor conditions, which enhances its range of applicability. This review highlights the mechanisms behind copper's potent antimicrobial property, the design and fabrication of different copper-based antimicrobial materials and coatings comprising metallic copper/copper alloys, copper nanoparticles or ions, and their potential for practical applications. Finally, as the antimicrobial coatings market is expected to grow, we offer our perspectives on the implications of increased copper release into the environment and the potential ecotoxicity effects and possibility of development of resistant genes in pathogens.

Strontium/Chitosan/Hydroxyapatite/Norcantharidin Composite That Inhibits Osteosarcoma and Promotes Osteogenesis In Vitro

Hydroxyapatite can deliver drugs, and its composite material is capable of repairing bone defects in tumors. This study was conducted to evaluate the effect of composite materials on tumor growth inhibition and bone growth induction. Composites containing drug delivery compounds were synthesized by coprecipitation and freeze-drying and then characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). In addition, the effect of hydroxyapatite nanoparticles (nano-SHAP) on proliferation of an osteosarcoma cell line (MG-63) and an osteoblast cell line (MC3T3-E1) was evaluated, and its mechanism was studied. The use of nano-SHAP alone did not affect the proliferation of normal cell lines. However, nanoparticles containing different amounts of norcantharidin in the composite materials and had different inhibitory effects on osteosarcoma and different effects on osteoblasts. And, with the increase of the content of norcantharidin, the antitumor performance of the composite has been enhanced. In summary, the nano-SHAP system developed in this study is a drug delivery material that can inhibit the growth of tumors and induce the proliferation of osteoblasts.

Cu nanoparticles constrain segmental dynamics of cross-linked polyethers: a trade-off between non-fouling and antibacterial properties

Copper has a strong bactericidal effect against multi-drug resistant pathogens and polyethers are known for their resistance to biofilm formation. Herein, we combined Cu nanoparticles (NPs) and a polyether plasma polymer in the form of nanocomposite thin films and studied whether both effects can be coupled. Cu NPs were produced by magnetron sputtering via the aggregation in a cool buffer gas whereas polyether layers were synthesized by Plasma-Assisted Vapor Phase Deposition with poly(ethylene oxide) (PEO) used as a precursor. In situ specific heat spectroscopy and XPS analysis revealed the formation of a modified polymer layer around the NPs which propagates on the scale of a few nanometers from the Cu NP/polymer interface and then transforms into a bulk polymer phase. The chemical composition of the modified layer is found to be ether-deficient due to the catalytic influence of copper whereas the bulk polymer phase exhibits the chemical composition close to the original PEO. Two cooperative glass transition phenomena are revealed that belong to the modified polymer layer and the bulk phase. The former is characterized by constrained mobility of polymer segments which manifests itself via a 30 K increase of dynamic glass transition temperature. Furthermore, the modified layer is characterized by the heterogeneous structure which results in higher fragility of this layer as compared to the bulk phase. The Cu NPs/polyether thin films exhibit reduced protein adsorption; however, the constrained segmental dynamics leads to the deterioration of the non-fouling properties for ultra-thin polyether coatings. The films are found to have a bactericidal effect against multi-drug resistant Gram-positive Methicillin-Resistant Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa.

Proteome profiling of Pseudomonas aeruginosa PAO1 identifies novel responders to copper stress

BACKGROUND

The opportunistic pathogen, Pseudomonas aeruginosa is well known for its environmental and metabolic versatility, yet many of the functions of its gene-products remain to be fully elucidated. This study's objective was to illuminate the potential functions of under-described gene-products during the medically relevant copper-stress condition.

RESULTS

We used data-independent acquisition mass spectrometry to quantitate protein expression changes associated with copper stress in P. aeruginosa PAO1. Approximately 2000 non-redundant proteins were quantified, with 78 proteins altering in abundance by +/- 1.5-fold or more when cultured to mid-log growth in the presence of 50 μM copper sulfate. One-third of those differentially expressed proteins have no prior established functional roles.

CONCLUSIONS

This study provides evidence for the functional involvement of some specific proteins in enabling P. aeruginosa to survive under sub-lethal concentrations of copper. This further paves the way for targeted investigations into the specific mechanisms of their activity.

Potential ecotoxicological effects of antimicrobial surface coatings: a literature survey backed up by analysis of market reports

This review was initiated by the COST action CA15114 AMICI "Anti-Microbial Coating Innovations to prevent infectious diseases," where one important aspect is to analyze ecotoxicological impacts of antimicrobial coatings (AMCs) to ensure their sustainable use. Scopus database was used to collect scientific literature on the types and uses of AMCs, while market reports were used to collect data on production volumes. Special attention was paid on data obtained for the release of the most prevalent ingredients of AMCs into the aqueous phase that was used as the proxy for their possible ecotoxicological effects. Based on the critical analysis of 2,720 papers, it can be concluded that silver-based AMCs are by far the most studied and used coatings followed by those based on titanium, copper, zinc, chitosan and quaternary ammonium compounds. The literature analysis pointed to biomedicine, followed by marine industry, construction industry (paints), food industry and textiles as the main fields of application of AMCs. The published data on ecotoxicological effects of AMCs was scarce, and also only a small number of the papers provided information on release of antimicrobial ingredients from AMCs. The available release data allowed to conclude that silver, copper and zinc are often released in substantial amounts (up to 100%) from the coatings to the aqueous environment. Chitosan and titanium were mostly not used as active released ingredients in AMCs, but rather as carriers for other release-based antimicrobial ingredients (e.g., conventional antibiotics). While minimizing the prevalence of healthcare-associated infections appeared to be the most prosperous field of AMCs application, the release of environmentally hazardous ingredients of AMCs into hospital wastewaters and thus, also the environmental risks associated with AMCs, comprise currently only a fraction of the release and risks of traditional disinfectants. However, being proactive, while the use of antimicrobial/antifouling coatings could currently pose ecotoxicological effects mainly in marine applications, the broad use of AMCs in other applications like medicine, food packaging and textiles should be postponed until reaching evidences on the (i) profound efficiency of these materials in controlling the spread of pathogenic microbes and (ii) safety of AMCs for the human and ecosystems.

Transparent Copper-Based Antibacterial Coatings with Enhanced Efficacy against Pseudomonas aeruginosa

Bacterial surface contamination is a major cause of hospital-associated infections. Antibacterial coatings can play an important role in reducing bacterial transmission via inanimate surfaces in healthcare settings. In this work, transparent copper-based antibacterial coatings were fabricated on commercial poly(vinyl fluoride) and stainless steel. Acrylated quaternized chitosan and ethylenediaminetetraacetic acid were covalently grafted on the substrate for complexation with copper ions. The number of viable Staphylococcus aureus in a droplet [containing ∼10⁴ colony forming units (CFU)], deposited on the copper-containing coating decreased by ∼96% within 60 min at 25 °C. With Pseudomonas aeruginosa, one of the most virulent and hardest to kill bacteria, no CFU could be observed within the same time span (killing efficacy >99.8% based on the detection limit). An increase in copper release from the coating was observed in the presence of P. aeruginosa, which was postulated to be due to the proteolytic activity of P. aeruginosa. The higher efficacy of the coating against P. aeruginosa compared to S. aureus is thus attributed to this increased copper release from the coating, which resulted in extensive bacterial membrane damage and death. The copper-containing coating on poly(vinyl fluoride) retained its antibacterial efficacy after 100 wipes with a water-wetted cloth or isopropanol wipes, demonstrating its durability and long-term efficacy. The coating did not exhibit significant cytotoxicity toward mammalian fibroblasts, further demonstrating its potential for mitigating bacterial transmission in a clinical setting.

CuO Nanoparticles-Containing Highly Transparent and Superhydrophobic Coatings with Extremely Low Bacterial Adhesion and Excellent Bactericidal Property

Human health and industrial instruments have been suffering from bacterial colonization on the surface of materials for a long time. Recently, antibacterial coatings are regarded as the new strategy to resist bacterial pathogens. In this work, novel highly transparent and superhydrophobic coatings with extremely low bacterial adhesion and bactericidal performance were prepared by spray-coating hydrophobic silica sol and CuO nanoparticles. The coated glass showed high transmittance in 300-2500 nm with a maximum value of 96.6%. Compared with bare glass, its superhydrophobic characteristics resulted in a reduction in adhesion of bacteria ( Escherichia coli, E. coli) by up to 3.2 log cells/cm². Additionally, the live/dead staining test indicated that the as-prepared coating exhibited excellent bactericidal performance against E. coli. Moreover, the as-prepared coating could maintain their superhydrophobicity after the sand impact test. The proposed method to fabricate such coatings could be applied on various substrates. Therefore, this novel hybrid surface with the abilities to reduce bacterial adhesion and kill attached bacteria make it a promising candidate for biosensors, microfluidics, bio-optical devices, household facilities, lab-on-chips, and touchscreen devices.

Antibacterial Performance of TiCaPCON Films Incorporated with Ag, Pt, and Zn: Bactericidal Ions Versus Surface Microgalvanic Interactions

It is very important to prevent bacterial colonization at the early postoperative stages. There are four major strategies and their corresponding types of antibacterial surfaces specifically designed to fight infection: bactericide release, anti-adhesion, pH-sensitive, and contact-killing. Herein, we aimed at determining the antibacterial efficiency of different types of bactericidal ions and revealing the possible contribution of surface microgalvanic effects arising from a potential difference on heterogeneous surfaces. We considered five types of TiCaPCON films, with Ag, Zn, Pt, Ag + Zn, and Pt + Zn nanoparticles (NPs) on their surface. The Ag-modified film demonstrated a pronounced antibacterial effect at a very low Ag ion concentration of 0.11 ppb in physiological solution that was achieved already after 3 h of immersion in Escherichia coli ( E. coli) bacterial culture. The Zn-containing sample also showed a noticeable antibacterial effect against E. coli and Staphylococcus aureus ( S. aureus) strains, wherein the concentration of Zn ions was 2 orders of magnitude higher (15 ppb) compared with the Ag ions. The presence of Ag NPs accelerated the leaching of Zn ion out of the TiCaPCON-Ag-Zn film, but no synergistic effect of the simultaneous presence of the two bactericidal components was observed. After the incubation of the samples with Ag, Zn, and Ag + Zn NPs in E. coli and S. aureus suspensions for 24 and 8 h, respectively, all bacterial cells were completely inactivated. The Pt-containing film showed a very low Pt ion release, and therefore the contribution of this type of ions to the total bactericidal effect could be neglected. The results of the electrochemical studies and Kelvin probe force microscopy indicated that microgalvanic couples were formed between the Pt NPs and the TiCaPCON film, but no noticeable antibacterial effect against either E. coli or S. aureus strains was observed. All ion-modified samples provided good osteoblastic cell attachment, spreading, and proliferation and therefore were concluded to be nontoxic for cells. In addition, the TiCaPCON films with Ag, Pt, and Zn NPs on their surface demonstrated good osteoconductive characteristics.

Role of poly(ethylene oxide) in copper-containing composite used for intrauterine contraceptive devices

Copper-containing composite is a cupric ions release system to prepare a novel copper intrauterine devices (Cu-IUDs), its biocompatibility and weight of the prepared composite Cu-IUDs are directly relevant to its such side-effects as pain and bleeding. To improve its biocompatibility and reduce its weight of such a composite Cu-IUDs, a copper-containing composite based on polymer alloy of poly(ethylene oxide) (PEO) and low-density polyethylene (LDPE) is developed. Here the role of its PEO in this novel cupric ions release system is reported. The results show that its cupric ions release rate can be adjusted easily by only changing its PEO content, and it increases remarkably with the increase of its PEO content. Our study also show that this influence is caused by the improvement of its hydrophilicity and the formation of its porous structure owing to the introduction of PEO. The improvement of its hydrophilicity make it easier for the surrounding aqueous solution to infiltrate into the composite, and the formation of its porous structure provide more routes for entry of the aqueous solution and diffusion of the released cupric ions. All these results indicate that the Cu/PEO/LDPE composite is a potential material that can be used to prepare such cupric ions release micro-devices as Cu-IUDs with slighter side-effects through its smaller weight.