Insect Analogue to the Lotus Leaf: A Planthopper Wing Membrane Incorporating a Low-Adhesion, Nonwetting, Superhydrophobic, Bactericidal, and Biocompatible Surface

Contaminant Removal Using Vibrating Surfaces: Nanoscale Insights and a Universal Scaling Law

The development of active self-cleaning surfaces, i.e., surfaces that remove nanoscale contaminants using external forces such as electric or magnetic fields, is critical to many engineering applications. The use of surface vibrations represents a promising alternative, but the underlying nanoscale physics, in the absence of an intermediate liquid medium, is poorly understood. We used molecular dynamics simulations to explore the use of ultra-high-frequency surface acoustic wave devices for contaminant removal. Our simulations reveal that there exists a critical vibrational energy threshold, determined by the amplitude and frequency of the surface vibrations, that must be surpassed to effectively dislodge contaminant particles. We derive a universal scaling law that links the characteristic size of particles to the optimal vibrational parameters required for their removal. This provides a theoretical framework to aid the development of advanced, scalable self-cleaning surfaces with applications ranging from semiconductors to large-scale industrial systems.

Robust Rain-Repellency and Droplet Bouncing Properties of Bauhinia Fresh and Aged Leaves Up to 6 Months

Robust rain-repellent surfaces are useful in roofs, solar panels, windshields, etc. Herein, excellent rain-repellency and droplet bouncing properties of Bauhinia Variegata leaves are presented. They possess surface microbumps (l ∼ 13 μm, w ∼ 8 μm, h ∼ 3 μm), which in turn comprise nanoplatelets (l ∼ 741 nm, t ∼ 59 nm) and Wenzel roughness (r w) of ∼2.2. The leaf's surface energy was estimated to be 9.47 ± 0.03 mJ·m-2 by incorporating rw into the van Oss-Good-Chaudhary theory. The leaves exhibited static contact angle of 157 ± 1°, roll-off angle of 9 ± 1°, and contact angle hysteresis of 12 ± 4°, which retained as they aged up to 186 days in the natural weather and laboratory conditions. The water droplets (10 μL, 40 μL) bounced off for free-fall heights from 5 cm to ∼13 m (Weber no. 36 to ∼2990) and displayed robust rain-repellency (Weber no. ∼4500), similar to that of a lotus leaf. Also, Bauhinia leaves survived pressurized water jets (Weber no. ∼4240). Nevertheless, underwater hydrophobicity has been persistent only for up to 3 h when submerged in 20 cm (∼1.96 kPa gauge pressure) deep water, while lotus leaves retained for >7 h. Such robust Bauhinia leaf's nanoplatelets and wax chemistries can be replicated onto glass/metals for preparing rain-repellent surfaces.

Functional fibrillar interfaces: Biological hair as inspiration across scales

Hair, or hair-like fibrillar structures, are ubiquitous in biology, from fur on the bodies of mammals, over trichomes of plants, to the mastigonemes on the flagella of single-celled organisms. While these long and slender protuberances are passive, they are multifunctional and help to mediate interactions with the environment. They provide thermal insulation, sensory information, reversible adhesion, and surface modulation (e.g., superhydrophobicity). This review will present various functions that biological hairs have been discovered to carry out, with the hairs spanning across six orders of magnitude in size, from the millimeter-thick fur of mammals down to the nanometer-thick fibrillar ultrastructures on bateriophages. The hairs are categorized according to their functions, including protection (e.g., thermal regulation and defense), locomotion, feeding, and sensing. By understanding the versatile functions of biological hairs, bio-inspired solutions may be developed across length scales.

Multilevel Micronanoscale Texture Effects on Fly Wing Membrane-Water Droplet Interaction

The wettable surface or nonwettable surface that is derived from a multilevel micronanoscale structure is abundant in nature and biomimetic commodities. Those hoverflies with the seta-coated wing membrane detached from impacting free-falling raindrops were observed in static states. A hoverfly wing membrane with well-ordered setae was identified as a robust nonwettable surface, and the static water contact angle θ on the wing membrane at the microscopic scale is 136.84 ± 0.98°. Hoverfly wing membrane-water droplet interaction with the actual truth and the theoretical models was discussed and indicated that the theoretical calculation might not state the actual situation, arising from the membrane or seta-drop-bubble interaction and those multilevel micronanoscale structure characteristics on the wing membrane. Detailed investigation on nonwettable surface-wettable surface transformation with surface CaCO3 accumulation in a carbonization reaction and the characteristic transformation toward the hoverfly wing membrane with the multilevel micronanoscale structure was carried out. Then, the CaCO3 accumulation on PDMS texture films was carried out and the static water contact angle θ was tested. Those observations offer ideas to fabricate artificial films with a multilevel micronanoscale structure that could obtain some characteristics, i.e., nonwettable surface-wettable surface transformation.

Interdisciplinary-Inspired Smart Antibacterial Materials and Their Biomedical Applications

The discovery of antibiotics has saved millions of lives, but the emergence of antibiotic-resistant bacteria has become another problem in modern medicine. To avoid or reduce the overuse of antibiotics in antibacterial treatments, stimuli-responsive materials, pathogen-targeting nanoparticles, immunogenic nano-toxoids, and biomimetic materials are being developed to make sterilization better and smarter than conventional therapies. The common goal of smart antibacterial materials (SAMs) is to increase the antibiotic efficacy or function via an antibacterial mechanism different from that of antibiotics in order to increase the antibacterial and biological properties while reducing the risk of drug resistance. The research and development of SAMs are increasingly interdisciplinary because new designs require the knowledge of different fields and input/collaboration from scientists in different fields. A good understanding of energy conversion in materials, physiological characteristics in cells and bacteria, and bactericidal structures and components in nature are expected to promote the development of SAMs. In this review, the importance of multidisciplinary insights for SAMs is emphasized, and the latest advances in SAMs are categorized and discussed according to the pertinent disciplines including materials science, physiology, and biomimicry.

Looking for future biological control agents: the comparative function of the deutosternal groove in mesostigmatid mites

The physics of fluid laminar flow through an idealised deutosternum assembly is used for the first time to review predatory feeding designs over 72 different-sized example species from 16 mesostigmatid families in order to inform the finding of new biological control agents. Gnathosomal data are digitised from published sources. Relevant gnathosomal macro- and micro-features are compared and contrasted in detail which may subtly impact the control of channel- or 'pipe'-based transport of prey liquids around various gnathosomal locations. Relative deutosternal groove width on the mesostigmatid subcapitulum is important but appears unrelated to the closing velocity ratio of the moveable digit. Big mites are adapted for handling large and watery prey. The repeated regular distance between deutosternal transverse ridges ('Querleisten') supports the idea of them enabling a regular fluctuating bulging or pulsing droplet-based fluid wave 'sticking' and 'slipping' along the groove. Phytoseiids are an outlier functional group with a low deutosternal pipe flow per body size designed for slot-like microchannel transport in low volume fluid threads arising from daintily nibbling nearby prey klinorhynchidly. Deutosternal groove denticles are orientated topographically in order to synergise flow and possible mixing of coxal gland-derived droplets and circumcapitular reservoir fluids across the venter of the gnathosomal base back via the hypostome to the prey being masticated by the chelicerae. As well as working with the tritosternum to mechanically clean the deutosternum, denticles may suppress fluid drag. Shallow grooves may support edge-crawling viscous flow. Lateral features may facilitate handling unusual amounts of fluid arising from opportunistic feeding on atypical prey. Various conjectures for confirmatory follow-up are highlighted. Suggestions as to how to triage non-uropodoid species as candidate plant pest control agents are included.

Recent Advances in Superhydrophobic and Antibacterial Cellulose-Based Fibers and Fabrics: Bio-inspiration, Strategies, and Applications

Cellulose-based fabrics are ubiquitous in our daily lives. They are the preferred choice for bedding materials, active sportswear, and next-to-skin apparels. However, the hydrophilic and polysaccharide characteristics of cellulose materials make them vulnerable to bacterial attack and pathogen infection. The design of antibacterial cellulose fabrics has been a long-term and on-going effort. Fabrication strategies based on the construction of surface micro-/nanostructure, chemical modification, and the application of antibacterial agents have been extensively investigated by many research groups worldwide. This review systematically discusses recent research on super-hydrophobic and antibacterial cellulose fabrics, focusing on morphology construction and surface modification. First, natural surfaces showing liquid-repellent and antibacterial properties are introduced and the mechanisms behind are explained. Then, the strategies for fabricating super-hydrophobic cellulose fabrics are summarized, and the contribution of the liquid-repellent function to reducing the adhesion of live bacteria and removing dead bacteria is elucidated. Representative studies on cellulose fabrics functionalized with super-hydrophobic and antibacterial properties are discussed in detail, and their potential applications are also introduced. Finally, the challenges in achieving super-hydrophobic antibacterial cellulose fabrics are discussed, and the future research direction in this area is proposed.

Graphical Abstract

The figure summarizes the natural surfaces and the main fabrication strategies of superhydrophobic antibacterial cellulose fabrics and their potential applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-023-00297-1.

Contaminant Removal from Nature's Self-Cleaning Surfaces

Many organisms in nature have evolved superhydrophobic surfaces that leverage water droplets to clean themselves. While this ubiquitous self-cleaning process has substantial industrial promise, experiments have so far been unable to comprehend the underlying physics. With the aid of molecular simulations, here we rationalize and theoretically explain self-cleaning mechanisms by resolving the complex interplay between particle-droplet and particle-surface interactions, which originate at the nanoscale. We present a universal phase diagram that consolidates (a) observations from previous surface self-cleaning experiments conducted at micro-to-millimeter length scales and (b) our nanoscale particle-droplet simulations. Counterintuitively, our analysis shows that an upper limit for the radius of the droplet exists to remove contaminants of a particular size. We are now able to predict when and how particles of varying scale (from nano-to-micrometer) and adhesive strengths are removed from superhydrophobic surfaces.

Wetting Effect on Patterned Substrates

A droplet deposited on a solid substrate leads to the wetting phenomenon. A natural observation is the lotus effect, known for its superhydrophobicity. This special feature is engendered by the structured microstructure of the lotus leaf, namely, surface heterogeneity, as explained by the quintessential Cassie-Wenzel theory (CWT). In this work, recent designs of functional substrates are overviewed based on the CWT via manipulating the contact area between the liquid and the solid substrate as well as the intrinsic Young's contact angle. Moreover, the limitation of the CWT is discussed. When the droplet size is comparable to the surface heterogeneity, anisotropic wetting morphology often appears, which is beyond the scope of the Cassie-Wenzel work. In this case, several recent studies addressing the anisotropic wetting effect on chemically and mechanically patterned substrates are elucidated. Surface designs for anisotropic wetting morphologies are summarized with respect to the shape and the arrangement of the surface heterogeneity, the droplet volume, the deposition position of the droplet, as well as the mean curvature of the surface heterogeneity. A thermodynamic interpretation for the wetting effect and the corresponding open questions are presented at the end.

Staying Dry and Clean: An Insect's Guide to Hydrophobicity

Insects demonstrate a wide diversity of microscopic cuticular and extra-cuticular features. These features often produce multifunctional surfaces which are greatly desired in engineering and material science fields. Among these functionalities, hydrophobicity is of particular interest and has gained recent attention as it often results in other properties such as self-cleaning, anti-biofouling, and anti-corrosion. We reviewed the historical and contemporary scientific literature to create an extensive review of known hydrophobic and superhydrophobic structures in insects. We found that numerous insects across at least fourteen taxonomic orders possess a wide variety of cuticular surface chemicals and physical structures that promote hydrophobicity. We discuss a few bioinspired design examples of how insects have already inspired new technologies. Moving forward, the use of a bioinspiration framework will help us gain insight into how and why these systems work in nature. Undoubtedly, our fundamental understanding of the physical and chemical principles that result in functional insect surfaces will continue to facilitate the design and production of novel materials.

Biomimetic Approaches to "Transparent" Photovoltaics: Current and Future Applications

There has been a surge in the interest for (semi)transparent photovoltaics (sTPVs) in recent years, since the more traditional, opaque, devices are not ideally suited for a variety of innovative applications spanning from smart and self-powered windows for buildings to those for vehicle integration. Additional requirements for these photovoltaic applications are a high conversion efficiency (despite the necessary compromise to achieve a degree of transparency) and an aesthetically pleasing design. One potential realm to explore in the attempt to meet such challenges is the biological world, where evolution has led to highly efficient and fascinating light-management structures. In this mini-review, we explore some of the biomimetic approaches that can be used to improve both transparent and semi-transparent photovoltaic cells, such as moth-eye inspired structures for improved performance and stability or tunable, coloured, and semi-transparent devices inspired by beetles' cuticles. Lastly, we briefly discuss possible future developments for bio-inspired and potentially bio-compatible sTPVs.

Bioselectivity of silk protein-based materials and their bio-inspired applications

Adhesion to material surfaces is crucial for almost all organisms regarding subsequent biological responses. Mammalian cell attachment to a surrounding biological matrix is essential for maintaining their survival and function concerning tissue formation. Conversely, the adhesion and presence of microbes interferes with important multicellular processes of tissue development. Therefore, tailoring bioselective, biologically active, and multifunctional materials for biomedical applications is a modern focus of biomaterial research. Engineering biomaterials that stimulate and interact with cell receptors to support binding and subsequent physiological responses of multicellular systems attracted much interest in the last years. Further to this, the increasing threat of multidrug resistance of pathogens against antibiotics to human health urgently requires new material concepts for preventing microbial infestation and biofilm formation. Thus, materials exhibiting microbial repellence or antimicrobial behaviour to reduce inflammation, while selectively enhancing regeneration in host tissues are of utmost interest. In this context, protein-based materials are interesting candidates due to their natural origin, biological activity, and structural properties. Silk materials, in particular those made of spider silk proteins and their recombinant counterparts, are characterized by extraordinary properties including excellent biocompatibility, slow biodegradation, low immunogenicity, and non-toxicity, making them ideally suited for tissue engineering and biomedical applications. Furthermore, recombinant production technologies allow for application-specific modification to develop adjustable, bioactive materials. The present review focusses on biological processes and surface interactions involved in the bioselective adhesion of mammalian cells and repellence of microbes on protein-based material surfaces. In addition, it highlights the importance of materials made of recombinant spider silk proteins, focussing on the progress regarding bioselectivity.

Recent Progress on Bioinspired Antibacterial Surfaces for Biomedical Application

Surface bacterial fouling has become an urgent global challenge that calls for resilient solutions. Despite the effectiveness in combating bacterial invasion, antibiotics are susceptible to causing microbial antibiotic resistance that threatens human health and compromises the medication efficacy. In nature, many organisms have evolved a myriad of surfaces with specific physicochemical properties to combat bacteria in diverse environments, providing important inspirations for implementing bioinspired approaches. This review highlights representative natural antibacterial surfaces and discusses their corresponding mechanisms, including repelling adherent bacteria through tailoring surface wettability and mechanically killing bacteria via engineering surface textures. Following this, we present the recent progress in bioinspired active and passive antibacterial strategies. Finally, the biomedical applications and the prospects of these antibacterial surfaces are discussed.

Bioinspired Topographic Surface Modification of Biomaterials

Physical surface modification is an approach that has been investigated over the last decade to reduce bacterial adhesion and improve cell attachment to biomaterials. Many techniques have been reported to modify surfaces, including the use of natural sources as inspiration to fabricate topographies on artificial surfaces. Biomimetics is a tool to take advantage of nature to solve human problems. Physical surface modification using animal and vegetal topographies as inspiration to reduce bacterial adhesion and improve cell attachment has been investigated in the last years, and the results have been very promising. However, just a few animal and plant surfaces have been used to modify the surface of biomaterials with these objectives, and only a small number of bacterial species and cell types have been tested. The purpose of this review is to present the most current results on topographic surface modification using animal and plant surfaces as inspiration to modify the surface of biomedical materials with the objective of reducing bacterial adhesion and improving cell behavior.

Durable and transparent super anti-wetting coatings with excellent liquid repellency and anti-fouling performance based on fluorinated polysiloxane

Super anti-fouling coatings are of great interest because of their good liquid repellency and anti-fouling performance. However, it is challenging to prepare durable and transparent super anti-fouling coatings, especially via...

A Novel Antibacterial Gold Nanoparticles Layer with Self-Cleaning Ability by the Production of Oxygen Bubbles

Bacterial contamination of medical devices not only constitutes a serious threat to the health of patients, but also promotes the evolution of bacterial drug-resistance. Here, a new strategy to fabricate...

Ultrasonic assisted rapid preparation of superhydrophobic stainless steel surface and its application in oil/water separation

The preparation of superhydrophobic (SH) surface on stainless steel by chemical etching method is challenging due to the good corrosion resistance of the material. In this work, SH surface with water contact angle (WCA) as high as 163.21° was accomplished on 304 stainless steel surface by a rapid ultrasonic-assisted chemical etching method within 7 min and a low-cost fluorine-free modification treatment. The mechanism of ultrasonic field on the etching process was explored by detecting the cavitation and oscillation energy in the reactor. It is the first time to found that the ultrasonic cavitation effect enhanced the etching process by both chemical and physical facilitation resulting in hierarchical lamellar micro-structures, "mountain-like" micro-structure clusters and "coral-reef-like" nano-scale structures on the surface. With the ultrasonic power increasing, the ultrasonic cavitation effect not only enhanced the superhydrophobicity of sample surface, but also improved the uniformity of surface wettability. The samples also showed excellent performance of oil/water separation for various organics (all separation efficiencies up to 96%) and remarkable mechanical stability.

DNA Origami Meets Bottom-Up Nanopatterning

DNA origami has emerged as a powerful molecular breadboard with nanometer resolution that can integrate the world of bottom-up (bio)chemistry with large-scale, macroscopic devices created by top-down lithography. Substituting the top-down patterning with self-assembled colloidal nanoparticles now takes the manufacturing complexity of top-down lithography out of the equation. As a result, the deterministic positioning of single molecules or nanoscale objects on macroscopic arrays is benchtop ready and easily accessible.

Biomaterials for human space exploration: A review of their untapped potential

As biomaterial advances make headway into lightweight radiation protection, wound healing dressings, and microbe resistant surfaces, a relevance to human space exploration manifests itself. To address the needs of the human in space, a knowledge of the space environment becomes necessary. Both an understanding of the environment itself and an understanding of the physiological adaptations to that environment must inform design parameters. The space environment permits the fabrication of novel biomaterials that cannot be produced on Earth, but benefit Earth. Similarly, designing a biomaterial to address a space-based challenge may lead to novel biomaterials that will ultimately benefit Earth. This review describes several persistent challenges to human space exploration, a variety of biomaterials that might mitigate those challenges, and considers a special category of space biomaterial. STATEMENT OF SIGNIFICANCE: This work is a review of the major human and environmental challenges facing human spaceflight, and where biomaterials may mitigate some of those challenges. The work is significant because a broad range of biomaterials are applicable to the human space program, but the overlap is not widely known amongst biomaterials researchers who are unfamiliar with the challenges to human spaceflight. Additionaly, there are adaptations to microgravity that mimic the pathology of certain disease states ("terrestrial analogs") where treatments that help the overwhelmingly healthy astronauts can be applied to help those with the desease. Advances in space technology have furthered the technology in that field on Earth. By outlining ways that biomaterials can promote human space exploration, space-driven advances in biomaterials will further biomaterials technology.

Which Are the Main Surface Disinfection Approaches at the Time of SARS-CoV-2?

Among many guidelines issued by the World Health Organization to prevent contagion from novel coronavirus (SARS-CoV-2), disinfection of animate and inanimate surfaces has emerged as a key issue. One effective approach to prevent its propagation can be achieved by disinfecting air, skin, or surfaces. A thorough and rational application of an Environmental Protection Agent for disinfection of surfaces, as well as a good personal hygiene, including cleaning hands with appropriate products (e.g., 60–90% alcohol-based product) should minimize transmission of viral respiratory pathogens such as SARS-CoV-2. Critical issues, associated with the potential health hazard of chemical disinfectants and the ineffective duration of most of the treatments, have fostered the introduction of innovative and alternative disinfection approaches. The present review aims to provide an outline of methods currently used for inanimate surface disinfection with a look to the future and a focus on the development of innovative and effective disinfection approaches (e.g., metal nanoparticles, photocatalysis, self-cleaning, and self-disinfection) with particular focus on SARS-CoV-2. The research reviews are, usually, focused on a specific category of disinfection methods, and therefore they are limited. On the contrary, a panoramic review with a wider focus, as the one here proposed, can be an added value for operators in the sector and generally for the scientific community.

Surface texture limits transfer of S. aureus, T4 bacteriophage, influenza B virus and human coronavirus

Spread of pathogens on contaminated surfaces plays a key role in disease transmission. Surface technologies that control pathogen transfer can help control fomite transmission and are of great interest to public health. Here, we report a novel bead transfer method for evaluating fomite transmission in common laboratory settings. We show that this method meets several important criteria for quantitative test methods, including reasonableness, relevancy, resemblance, responsiveness, and repeatability, and therefore may be adaptable for standardization. In addition, this method can be applied to a wide variety of pathogens including bacteria, phage, and human viruses. Using the bead transfer method, we demonstrate that an engineered micropattern limits transfer of Staphylococcus aureus by 97.8% and T4 bacteriophage by 93.0% on silicone surfaces. Furthermore, the micropattern significantly reduces transfer of influenza B virus and human coronavirus on silicone and polypropylene surfaces. Our results highlight the potential of using surface texture as a valuable new strategy in combating infectious diseases.

Three-Dimensional Hierarchical Wrinkles on Polymer Films: From Chaotic to Ordered Antimicrobial Topographies

Microbial contamination of polymer surfaces has become a significant challenge in domestic, industrial, and biomedical applications. Recent progress in our understanding of how topographical features of different length scales can be used to effectively and selectively control the attachment and proliferation of different cell types has provided an alternative strategy for imparting antibacterial activity to these surfaces. Among the well-recognized engineered models of antibacterial surface topographies, self-organized wrinkles have shown particular promise with respect to their antimicrobial characteristics. Here, we critically review the mechanisms by which wrinkles form on the surface of different types of polymer material and how they interact with various biomolecules and cell types. We also discuss the feasibility of using this antimicrobial strategy in real-life biomedical applications.

Hierarchical Rose Petal Surfaces Delay the Early-Stage Bacterial Biofilm Growth

A variety of natural surfaces exhibit antibacterial properties; as a result, significant efforts in the past decade have been dedicated toward fabrication of biomimetic surfaces that can help control biofilm growth. Examples of such surfaces include rose petals, which possess hierarchical structures like the micropapillae measuring tens of microns and nanofolds that range in the size of 700 ± 100 nm. We duplicated the natural structures on rose petal surfaces via a simple UV-curable nanocasting technique and tested the efficacy of these artificial surfaces in preventing biofilm growth using clinically relevant bacteria strains. The rose petal-structured surfaces exhibited hydrophobicity (contact angle (CA) ≈ 130.8° ± 4.3°) and high CA hysteresis (∼91.0° ± 4.9°). Water droplets on rose petal replicas evaporated following the constant contact line mode, indicating the likely coexistence of both Cassie and Wenzel states (Cassie-Baxter impregnating the wetting state). Fluorescence microscopy and image analysis revealed the significantly lower attachment of Staphylococcus epidermidis (86.1 ± 6.2% less) and Pseudomonas aeruginosa (85.9 ± 3.2% less) on the rose petal-structured surfaces, compared with flat surfaces over a period of 2 h. An extensive biofilm matrix was observed in biofilms formed by both species on flat surfaces after prolonged growth (several days), but was less apparent on rose petal-biomimetic surfaces. In addition, the biomass of S. epidermidis (63.2 ± 9.4% less) and P. aeruginosa (76.0 ± 10.0% less) biofilms were significantly reduced on the rose petal-structured surfaces, in comparison to the flat surfaces. By comparing P. aeruginosa growth on representative unitary nanopillars, we demonstrated that hierarchical structures are more effective in delaying biofilm growth. The mechanisms are two-fold: (1) the nanofolds across the hemispherical micropapillae restrict initial attachment of bacterial cells and delay the direct contact of cells via cell alignment and (2) the hemispherical micropapillae arrays isolate bacterial clusters and inhibit the formation of a fibrous network. The hierarchical features on rose petal surfaces may be useful for developing strategies to control biofilm formation in medical and industrial contexts.

Variations in surface structures and wettability in the genus Pachnoda Burmeister

In order to grow and live, all species need access to water and often the ability to control their intake thereof. Among species throughout the world, several animals and plants are known for unique surface patterns and features that influence their wettability in such a way that water is always readily accessible, even in arid and hot climates. In this work, the authors report a journey into the genus Pachnoda, studying 12 species or subspecies to compare their surface properties and wettabilities. This work reveals exceptional natural surface morphologies based on a honeycomb structure with significant variations depending on the Pachnoda genus. Even if the materials present on their surface are intrinsically hydrophilic, some of the species have parahydrophobic properties with apparent contact angles of up to 145° and extremely strong water adhesion. Only the Cassie–Baxter equation can explain these results indicating the presence of trapped air within these surface structures when a liquid, such as water, makes contact. Among the species explored here, water hydrophobicity and adhesion are controlled by the dimensions of the honeycombs, the presence of lamellar structures on the border of these features and the presence of roughness in their internal structures.

In Situ Incorporation of Pores and Nanoparticles into Polymer Surfaces Using Melt Crystallization

Engineering the surface properties of a material without affecting its bulk properties is desirable for many applications, but it is often not readily achievable because it requires a complex series of processing steps. This study presents for the first time a simple and straightforward method that can convert regular flat polymer surfaces into various porous composite surfaces. The controlled dissolution of the polymer surface by a dispersion and subsequent melt crystallization allows for the successful embedding of dispersed inorganic or organic particles in the pore walls. The porous surface morphology is not significantly affected by the type of dispersed particle, but the contact and sliding angles and surface wettability are. Both superhydrophobic and oil/water separation surfaces can be conveniently fabricated from flat polymer surfaces. This novel and versatile technique could provide engineering freedom for the future development of various functional materials.

Multi-biofunctional properties of three species of cicada wings and biomimetic fabrication of nanopatterned titanium pillars

Recently, multi-biofunctional properties of cicada wings have drawn keen interest for biomedical device applications due to their superhydrophobic, self-cleaning and bactericidal effects. We present a systematic evaluation of bactericidal and cytocompatible properties of cicada wings. We also present biomimetic nanofabrication of a patterned array of titanium nanopillars using electron beam lithography. We have characterized the nanoscale architecture of the wings of three different Australian species of cicadas (Psaltoda claripennis, Aleeta curvicosta and Palapsalta eyrei) using helium ion microscopy (HIM), scanning electron microscopy, atomic force measurement (AFM) and transmission electron microscopy (TEM). The chemical nature of the nanopatterned substrates was investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Pseudomonas aeruginosa and Staphylococcus aureus cells were attached to determine the bactericidal activity of the insect wings. Human osteoblast cells were attached to examine the biocompatibility of the insect wings. It was found that all the three cicada species have unique surface topography on their wing membranes and veins. The height, spacing, diameter, density and aspect ratio of the three species varied between the species and between the membrane and the veins. The density and aspect ratio of the nanopillars on the membranes were significantly higher than on the veins. Bacterial attachment investigation confirmed that P. aeruginosa cells and S. aureus cells were damaged by the nanopatterned array of pillars. A significant reduction in colonies of P. aeruginosa cells was found on the wings of the three species compared to the control after 18 hours. A significant reduction of S. aureus cells on the wings was observed at 2 and 4 hours but not at 18 hours compared to the control. The cell morphology of the human osteoblast cells appeared intact after 24 hours of attachment, indicating the biocompatibility of the insect wings. As a proof of concept, patterned nanopillars of titanium have been fabricated using the electron beam lithography technique directly inspired by the cicada wing architecture. The titanium nanopillars were observed to damage the bacterial cells of P. aeruginosa in a manner similar to the cicada wing species and remain compatible to osteoblast cells. The outcomes of this research can help to engineer an optimum nano-patterned surface to enhance the bioactivity and bactericidal effect on biomedical devices.

Non-wet kingfisher flying in the rain: The water-repellent mechanism of elastic feathers

HYPOTHESIS

Flying in the rain presents a greater challenge for smaller animals such as kingfishers, compared with aircraft in the same situation. Regardless, kingfishers have developed advanced water repellency as reflected in the hydrophobicity and elasticity of their feathers. Therefore, it is possible to confirm that the elastic superhydrophobic surface can enhance the water repellency of the surface by experimental and theoretical analysis.

EXPERIMENTS

A simplified device simulating droplet impact on a kingfisher feather was configured for comparison. Moreover, the dynamic behavior of droplets (with varying Weber numbers-2 ≤ W_e ≤ 42) impinging on the elastic and rigid substrate was analyzed, such as spreading, retraction, lift-off, the secondary droplet, and contact time with a high-speed camera.

FINDINGS

The elastic substrate significantly affected the retraction and lift-off of the droplet-that is, an earlier and more efficient morphological rearrangement of the droplet-reducing the contact time by up to 8.3% (17 < W_e ≤ 32). The combination of elasticity and hydrophobicity is a new bioinspired strategy that provides an insight into one of the mechanisms by which birds flying in the rain cannot be bedewed while guiding the design of water-repellent surfaces.

One-Step Preparation of Super-Hydrophobic Micro-Nano Dendrites on Al Alloy for Enhanced Corrosion Resistance

Corrosion failure is a thorny issue that restricts the applications of Al alloys. As a research hotspot in functional realization, hydrophobic fabrication exactly offers an efficient method to settle metallic corrosions. This work has developed a facile and low-cost method to enhance corrosion resistance of Al alloys. The micro-nano dendrites have been firstly prepared on metallic substrate using one-step potentiostatic deposition. Then, wetting and electrochemical behaviors have been systematically investigated after stearic acid modification. Results show that the as-prepared surface possesses amplified and durable water repellence with an apparent contact angle (CA) of 154.2° and a sliding angle (SA) of 4.7°. Meanwhile, owing to the trapped air in dendrites, the newly-generated solid-air-liquid interfaces help to resist seawater penetration by reducing interfacial interactions on the super-hydrophobic surface as well as significantly enhance its corrosion resistance. This work sheds positive insights into extending the applications of Al alloys in many areas, especially for ocean engineering fields.

Towards Laser-Textured Antibacterial Surfaces

Escherichia coli and Staphylococcus aureus bacterial retention on mirror-polished and ultrashort pulse laser-textured surfaces is quantified with a new approach based on ISO standards for measurement of antibacterial performance. It is shown that both wettability and surface morphology influence antibacterial behavior, with neither superhydrophobicity nor low surface roughness alone sufficient for reducing initial retention of either tested cell type. Surface structures comprising spikes, laser-induced periodic surface structures (LIPSS) and nano-pillars are produced with 1030 nm wavelength 350 fs laser pulses of energy 19.1 μJ, 1.01 μJ and 1.46 μJ, respectively. SEM analysis, optical profilometry, shear force microscopy and wettability analysis reveal surface structures with peak separations of 20–40 μm, 0.5–0.9 μm and 0.8–1.3 μm, average areal surface roughness of 8.6 μm, 90 nm and 60 nm and static water contact angles of 160°, 119° and 140°, respectively. E. coli retention is highest for mirror-polished specimens and spikes whose characteristic dimensions are much larger than the cell size. S. aureus retention is instead found to be inhibited under the same conditions due to low surface roughness for mirror-polished samples (S_a: 30 nm) and low wettability for spikes. LIPSS and nano-pillars are found to reduce E. coli retention by 99.8% and 99.2%, respectively, and S. aureus retention by 84.7% and 79.9% in terms of viable colony forming units after two hours of immersion in bacterial broth due to both low wettability and fine surface features that limit the number of available attachment points. The ability to tailor both wettability and surface morphology via ultrashort pulsed laser processing confirms this approach as an important tool for producing the next generation of antibacterial surfaces.

Reducing Bacterial Infections and Biofilm Formation Using Nanoparticles and Nanostructured Antibacterial Surfaces

With the rapid spreading of resistance among common bacterial pathogens, bacterial infections, especially antibiotic-resistant bacterial infections, have drawn much attention worldwide. In light of this, nanoparticles, including metal and metal oxide nanoparticles, liposomes, polymersomes, and solid lipid nanoparticles, have been increasingly exploited as both efficient antimicrobials themselves or as delivery platforms to enhance the effectiveness of existing antibiotics. In addition to the emergence of widespread antibiotic resistance, of equal concern are implantable device-associated infections, which result from bacterial adhesion and subsequent biofilm formation at the site of implantation. The ineffectiveness of conventional antibiotics against these biofilms often leads to revision surgery, which is both debilitating to the patient and expensive. Toward this end, micro- and nanotopographies, especially those that resemble natural surfaces, and nonfouling chemistries represent a promising combination for long-term antibacterial activity. Collectively, the use of nanoparticles and nanostructured surfaces to combat bacterial growth and infections is a promising solution to the growing problem of antibiotic resistance and biofilm-related device infections.

It's Not a Bug, It's a Feature: Functional Materials in Insects

Over the course of their wildly successful proliferation across the earth, the insects as a taxon have evolved enviable adaptations to their diverse habitats, which include adhesives, locomotor systems, hydrophobic surfaces, and sensors and actuators that transduce mechanical, acoustic, optical, thermal, and chemical signals. Insect-inspired designs currently appear in a range of contexts, including antireflective coatings, optical displays, and computing algorithms. However, as over one million distinct and highly specialized species of insects have colonized nearly all habitable regions on the planet, they still provide a largely untapped pool of unique problem-solving strategies. With the intent of providing materials scientists and engineers with a muse for the next generation of bioinspired materials, here, a selection of some of the most spectacular adaptations that insects have evolved is assembled and organized by function. The insects presented display dazzling optical properties as a result of natural photonic crystals, precise hierarchical patterns that span length scales from nanometers to millimeters, and formidable defense mechanisms that deploy an arsenal of chemical weaponry. Successful mimicry of these adaptations may facilitate technological solutions to as wide a range of problems as they solve in the insects that originated them.

Macro-SICM: A Scanning Ion Conductance Microscope for Large-Range Imaging

The scanning ion conductance microscope (SICM) is a versatile, high-resolution imaging technique that uses an electrolyte-filled nanopipet as a probe. Its noncontact imaging principle makes the SICM uniquely suited for the investigation of soft and delicate surface structures in a liquid environment. The SICM has found an ever-increasing number of applications in chemistry, physics, and biology. However, a drawback of conventional SICMs is their relatively small scan range (typically 100 μm × 100 μm in the lateral and 10 μm in the vertical direction). We have developed a Macro-SICM with an exceedingly large scan range of 25 mm × 25 mm in the lateral and 0.25 mm in the vertical direction. We demonstrate the high versatility of the Macro-SICM by imaging at different length scales: from centimeters (fingerprint, coin) to millimeters (bovine tongue tissue, insect wing) to micrometers (cellular extensions). We applied the Macro-SICM to the study of collective cell migration in epithelial wound healing.

Moth-eye mimetic cytocompatible bactericidal nanotopography: a convergent design

The rapid emergence of antibiotic resistant bacteria has prompted the need for radically different approaches to combat bacterial infections. Among these, bioinspired surface topographies have emerged as an effective sustainable strategy to deter bacterial infection. This study demonstrates the bactericidal activity and cytocompatibility of the moth-eye mimetic topography produced by thermal polymer nanoimprinting. The moth-eye topography was found to have bactericidal capabilities against Gram negative and Gram positive bacteria. Electron microscopy imaging revealed the bactericidal effect caused by mechanical rupture of the bacteria wall inflicted by the topography on the adhered cells. The cytocompatibility of the surfaces was evidenced by assessing the proliferation and morphology of keratinocytes cultured on the nanotopography. The technology meets important needs in medical implant technology for materials that not only have good biocompatibility but also antibacterial properties for reducing the risk of infections and related health complications.

Nano-engineering safer-by-design nanoparticle based moth-eye mimetic bactericidal and cytocompatible polymer surfaces

Nanotechnology provides a new design paradigm for alternative antibacterial strategies in the fight against drug-resistant bacteria. In this paper, the enhanced bactericidal action of moth-eye nanocomposite surfaces with a collaborative nanoparticle functional and topography structural mode of action is reported. The moth-eye nanocomposite surfaces are fabricated in combined processing steps of nanoparticle coating and surface nanoimprinting enabling the production of safer-by-design nanoparticle based antibacterial materials whereby the nanoparticle load is minimized whilst bactericidal efficiency is improved. The broad antibacterial activity of the nanocomposite moth-eye topographies is demonstrated against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and Pseudomonas aeruginosa as model bacteria. The antibacterial performance of the moth-eye nanocomposite topographies is notably improved over that of the neat moth-eye surfaces with bacteria inhibition efficiencies up to 90%. Concurrently, the moth-eye nanocomposite topographies show a non-cytotoxic behaviour allowing for the normal attachment and proliferation of human keratinocytes.

Moth-eye nanocomposite surfaces are fabricated in combined processing steps of nanoparticle coating and surface nanoimprinting enabling the production of safer-by-design antibacterial nanoparticle-based materials.