Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)

Enhanced room-temperature detection of ultra-low level nitrogen dioxide: Improved sensitivity, selectivity and stability through MXene-modified In2O3 microspheres

To address the increasing demand for wearable sensors, the development of gas sensors with high sensitivity and environmentally friendly power consumption for monitoring NO2 at room temperature (RT) is particularly promising. In this paper, porous In2O3 microspheres are prepared via a hydrothermal method, followed by the incorporation of 2D MXene solution to synthesize In2O3@MXene composites. After characterizing the microstructures and morphology of the In2O3@MXene composites, the influence of MXene on the microstructures and NO2 gas-sensing performance at RT is discussed in detail. The results indicate that a moderate amount of MXene greatly affects the energy band structure, chemisorbed and vacancy oxygen content, and the availability of reactive sites for oxygen and NO2, thereby affecting the gas-sensing performance of the In2O3@MXene sensors. Notably, the In2O3@10MXene sensor exhibits the highest response value of 24.98 to 4 ppm NO2 at RT, which is 5.90 times higher than that of In2O3 sensor (4.23). Furthermore, the In2O3@10MXene sensor still presents a response value of 2.83-500 ppb NO2 under RT, confirming an ultra-low ppb level detection limit to NO2 gas at RT. Additionally, the In2O3@10MXene sensor demonstrates favorable gas selectivity and long-term stability. The incorporation of an appropriate amount of MXene effectively enhances the gas-sensing performance of the In2O3@MXene sensors, attributed to the formation of a Schottky heterojunction, increased surface oxygen, and more reactive sites for oxygen and NO2 from MXene.

MXenes as emerging materials to repair electroactive tissues and organs

Nanomaterials with electroactive properties have taken a big leap for tissue repair and regeneration due to their unique physiochemical properties and biocompatibility. MXenes, an emerging class of electroactive materials have generated considerable interest for their biomedical applications from bench to bedside. Recently, the application of these two-dimensional wonder materials have been extensively investigated in the areas of biosensors, bioimaging and repair of electroactive organs, owing to their outstanding electromechanical properties, photothermal capabilities, hydrophilicity, and flexibility. The currently available data reports that there is significant potential to employ MXene nanomaterials for repair, regeneration and functioning of electroactive tissues and organs such as brain, spinal cord, heart, bone, skeletal muscle and skin. The current review is the first report that compiles the most recent advances in the application of MXenes in bioelectronics and the development of biomimetic scaffolds for repair, regeneration and functioning of electroactive tissues and organs including heart, nervous system, skin, bone and skeletal muscle. The content in this article focuses on unique features of MXenes, synthesis process, with emphasis on MXene-based electroactive tissue engineering constructs, biosensors and wearable biointerfaces. Additionally, a section on the future of MXenes is presented with a focus on the clinical applications of MXenes.

Ti3C2Tx MXene-Derived Metal-Organic Frameworks for Room Temperature NO2 Detection

This work reports a new method toward creating two-dimensional (2D) conductive metal-organic frameworks (MOFs) for enhanced gas sensing applications. By employing Ti3C2Tx MXene as a metal precursor and 2-aminoterapthalic acid as an organic linker, MXene-derived MOFs with high surface reactivity were synthesized. The Ti3C2Tx MXene sensor, initially selective toward NH3 gas, was tailored to detect NO2 gas by integrating it with MXene-derived MOFs, which offer abundant active sites on the surface. The resulting MOF sensor exhibited a notable sensing response of 76.52%, with rapid response and recovery times of 31.5 and 80.2 s, respectively, at room temperature and 35% relative humidity (RH). The sensor's specificity toward acidic NO2 gas was attributed to the acid-base interaction facilitated by the organic linker, inducing detectable changes in resistance. Additionally, the fabricated MOF sensor demonstrated excellent repeatability and stability under ambient conditions. Remarkably, the sensor exhibited a low detection limit (LOD) of 5 ppb for NO2 gas. These findings underscore the potential of utilizing 2D MOF sheets derived from MXene precursors for practical gas sensing applications, highlighting their versatility and effectiveness.

Nb2CTx/MoSe2 composites for a highly sensitive NH3 gas sensor at room temperature

The detection of ammonia (NH3)gas holds significant importance in both daily life and industrial production. In this study, the Nb2CTx/MoSe2 sensor was synthesized using a one-step hydrothermal method and applied for NH3 detection. The morphology and elemental composition of the composites were analyzed through a series of characterization techniques including XRD, TEM, SEM, and XPS, confirming the successful synthesis of Nb2CTx/MoSe2 composite with the optimal mass ratio. The sensing performance of the sensor for NH3 (0.1-100 ppm) was tested at room temperature (∼25 °C). The results showed that, compared to pure Nb2CTx, the sensor based on Nb2CTx/MoSe2 composite exhibited more stable baseline resistance, a 3.5-fold increase in response to 50 ppm NH3, and a reduction in response/recovery time by 56.4 s/32.1 s. Additionally, the sensor's response to NH3 (1 ppm, 50 ppm, 100 ppm) varied by less than 10 % over 90 days, demonstrating excellent stability. The sensing mechanism of NH3 by Nb2CTx/MoSe2 composite is attributed to the formation of a p-n heterojunction and surface charge transfer at the interface between p-type Nb2CTx and n-type MoSe2. Finally, the superior selectivity mechanism of the composite for NH3 was investigated using first-principles calculations. This work opens a new avenue for exploring the application potential of Nb2CTx MXene-based nanocomposites in NH3 detection.

Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges

The demand for highly functional chemical gas sensors has surged due to the increasing awareness of human health to monitor metabolic disorders or noncommunicable diseases, safety measures against harmful greenhouse and/or explosive gases, and determination of food freshness. Over the years of dedicated research, several types of chemiresistive gas sensors have been realized with appreciable sensitivities toward various gases. However, critical issues such as poor selectivity and sluggish response/recovery speeds continue to impede their widespread commercialization. Specifically, the mechanisms behind the selective response of some chemiresistive materials toward specific gas analytes remain unclear. In this review, we discuss state-of-the-art strategies employed to attain gas-selective chemiresistive materials, with particular emphasis on materials design, surface modification or functionalization with catalysts, defect engineering, material structure control, and integration with physical/chemical gas filtration media. The nature of material surface-gas interactions and the supporting mechanisms are elucidated, opening opportunities for optimizing the materials design, fine-tuning the gas sensing performance, and guiding the selection of the most appropriate materials for the accurate detection of specific gases. This review concludes with recommendations for future research directions and potential opportunities for further selectivity improvements.

Recent advances in 2D MXene-based heterostructures for gas sensing: mechanisms and applications in environmental and biomedical fields

MXenes, a unique class of 2D transition metal carbides, have gained attention for gas sensing applications due to their distinctive properties. Since the synthesis of Ti3C2Tx MXene in 2011, significant progress has been made in using MXenes as chemiresistive sensors. Their layered structure, abundant surface groups, hydrophilicity, tunable conductivity, and excellent thermal properties make MXenes ideal for low-power, flexible, room temperature gas sensors, fostering scalable and reproducible applications in portable devices. This review evaluates the latest advancements in MXene-based gas sensors, beginning with an overview of the elemental compositions, structures, and typical fabrication process of MXenes. We subsequently examine their applications in gas sensing domains, evaluating the proposed mechanisms for detecting common volatile organic compounds such as acetone, formaldehyde, ethanol, ammonia, and nitrogen oxides. To set this apart from similar reviews, our focus centered on the mechanistic interactions between MXene sensing materials and analytes (particularly for chemiresistive gas sensors), leveraging the distinct functionalities of MXene chemistries, which can be finely tuned for specific applications. Ultimately, we examine the current limitations and prospective research avenues concerning the utilization of MXenes in environmental and biomedical applications.

Advancing Non-Aqueous Etching Strategy for Swift and High-Yield Synthesis of 2D Molybdenum Carbides (MXenes)

Aqueous hydrofluoric acid (HF)-based solutions are widely used for etching MAX phases to synthesize high-purity 2D molybdenum carbides (MXenes). However, their applicability is limited to selected MAX phases, and the production of certain MXenes, such as Mo-based MXenes, remains challenging owing to low quality, low yield, and the time-intensive process, often requiring several days to weeks. In this study, a non-aqueous etchant for faster and more efficient synthesis of high-purity Mo-based MXenes is introduced. This etchant, containing Cl- and F- ions, is adequately effective to etch the MAX phase using the F- ions of moderate concentration regenerated from GaF6 3- byproducts but only mildly caustic to prevent damage to the resulting MXene. Using this approach, the rapid production of Mo2CTx is demonstrated within 24 h at 100 °C, achieving up to 90% multilayer and 45% monolayer yields. Furthermore, the resulting monolayer Mo2CTx flake exhibits larger sizes and fewer defects, with an electrical conductivity of 5.9 S cm-1, 6.5 times higher than that (0.9 S cm-1) of aqueous HF-Mo2CTx. This enhancement results in improved electrocatalytic activity of high-purity Mo2CTx for hydrogen evolution reactions. These findings highlight the potential of non-aqueous etching solutions to address the limitations of HF-based MXene synthesis.

Soft Materials and Devices Enabling Sensorimotor Functions in Soft Robots

Sensorimotor functions, the seamless integration of sensing, decision-making, and actuation, are fundamental for robots to interact with their environments. Inspired by biological systems, the incorporation of soft materials and devices into robotics holds significant promise for enhancing these functions. However, current robotics systems often lack the autonomy and intelligence observed in nature due to limited sensorimotor integration, particularly in flexible sensing and actuation. As the field progresses toward soft, flexible, and stretchable materials, developing such materials and devices becomes increasingly critical for advanced robotics. Despite rapid advancements individually in soft materials and flexible devices, their combined applications to enable sensorimotor capabilities in robots are emerging. This review addresses this emerging field by providing a comprehensive overview of soft materials and devices that enable sensorimotor functions in robots. We delve into the latest development in soft sensing technologies, actuation mechanism, structural designs, and fabrication techniques. Additionally, we explore strategies for sensorimotor control, the integration of artificial intelligence (AI), and practical application across various domains such as healthcare, augmented and virtual reality, and exploration. By drawing parallels with biological systems, this review aims to guide future research and development in soft robots, ultimately enhancing the autonomy and adaptability of robots in unstructured environments.

Room-Temperature Wearable Chemiresistor Based on a Flexible Inorganic Photoactive Anatase-Rutile TiO2/Yttria-Stabilized Zirconia Nanofiber Network

Wearable gas sensors offer remarkable advantages in terms of portability and real-time monitoring, rendering them highly promising for various applications such as environmental detection, health monitoring, and early disease diagnosis. However, the most widely used oxide semiconductor gas sensors encounter substantial challenges in achieving mechanical flexibility and room-temperature gas detection due to their inherent rigidity, brittleness, and reliance on high operating temperatures. Herein, an all-inorganic wearable oxide semiconductor gas sensor is fabricated by depositing the anatase/rutile TiO2 (TiO2-A/R) homojunction on a flexible yttria-stabilized zirconia (YSZ) nanofiber substrate using atomic layer deposition technology. The combination of the YSZ nanofiber and the ultrathin TiO2 sensing layer (∼13 nm) endows the wearable sensor with tiny linear strains (0.55%) when subjected to a radius of curvature of 25 μm. As a result, the wearable inorganic YSZ/TiO2-A/R sensor can be folded multiple times without fracturing and maintain a stable electrical connectivity during cyclic bending. Furthermore, the utilization of photoactive TiO2 homojunctions allows the sensor to be activated by UV light and operated at room temperature. The efficient separation efficiency of photogenerated carriers, which stems from the interfacial electric field of TiO2 homojunctions, significantly enhances the sensor's response, leading to a low detection limit of 0.15 ppm for acetone. In addition, the wearable sensor was anchored on a mask and successfully utilized for the detection of a simulated breathing gas of diabetics; the real-time and stable response signals demonstrate its potential for noninvasive diabetes diagnosis. This study provides a valuable reference for the advancement of wearable room-temperature inorganic semiconductor gas sensors, offering valuable insights into their potential applications in disease diagnosis.

Microwave Sensor with Light-Assisted Enhancement Based on Ti3C2Tx MXene: Toward ppb-Level NO2 Detection Limits

Chemiresistive sensors are currently the most popular gas sensors, and metal semiconductor oxides are often used as sensitive materials (SMs). However, their high operating temperature means that more energy is required to maintain normal operation of the SM, resulting in an increase in power consumption of the entire sensing system. In order to solve this problem, a microwave gas sensor embedded with multilayer Ti3C2Tx MXene and split ring resonator (SRR) for nitrogen dioxide (NO2) detection was reported in this work. The sensor takes advantage of the weak coupling between the two SRRs to achieve a highly concentrated electric field and high Q-factor, in which the weak coupling region serves as the sensitive region to avoid damage to the resonator structure caused by the excessive conductivity of Ti3C2Tx. The sensor has good selectivity, a lower detection limit of 2 ppb, with an average detection sensitivity of 98.66 mdB ppm-1 in the range of 2-10,000 ppb at room temperature. Additionally, the effect of different lighting source to the sensor performance is investigated, and the sensor reached the best response (1.54 dB) under blue light. Finally, the mechanism of the enhanced sensitivity is discussed in detail based on the results of simulations and tests. The sensor circuit designed in this work provides a new approach for MGSs and for the first time introduces the photocatalytic pathway into microwave sensors, which will contribute to the optimization of microwave gas sensors in the future.

Representative modeling of biocompatible MXene nanocomposites for next-generation biomedical technologies and healthcare

MXenes are a class of 2D transition metal carbides and nitrides (Mn+1XnT) that have attracted significant interest owing to their remarkable potential in various fields. The unique combination of their excellent electromagnetic, optical, mechanical, and physical properties have extended their applications to the biological realm as well. In particular, their ultra-thin layered structure holds specific promise for diverse biomedical applications. This comprehensive review explores the synthesis methods of MXene composites, alongside the biological and medical design strategies that have been employed for their surface engineering. This review delves into the interplay between these strategies and the resulting properties, biological activities, and unique effects at the nano-bio-interface. Furthermore, the latest advancements in MXene-based biomaterials and medicine are systematically summarized. Further discussion on MXene composites designed for various applications, including biosensors, antimicrobial agents, bioimaging, tissue engineering, and regenerative medicine, are also provided. Finally, with a focus on translating research results into real-world applications, this review addresses the current challenges and exciting future prospects of MXene composite-based biomaterials.

Highly selective ethanol gas sensor based on CdS/Ti3C2T x MXene composites

Sensing of hazardous gases has an important role in ensuring safety in a variety of industries as well as environments. Mainly produced by the combustion of fossil fuels and other organic matter, ethanol is a dangerous gas that endangers human health and the environment. Stability and sensing sensitivity are major considerations when designing gas sensors. Here, a superior ethanol sensor with a high response and fast recovery was synthesized by "wrapping" CdS nanoparticles on metallic Ti3C2T x MXene using a simple method. CdS nanoparticles were uniformly covered on the Ti3C2T x MXene surface, forming a "rice crust"-like heterostructure. The sensor displayed good detection of ethanol gas at room temperature. Response signals up to 31% were obtained for ethanol molecules (20 ppm) with quick recovery (41 s). The performance of the ethanol sensor was evaluated across a range of concentrations (5-100 ppm) and relative humidity (60% and 90% RH) at room temperature. Our method could open up a new strategy for the development of ethanol sensors.

Novel S-scheme based nanocomposite of MXene/V2O5 for environmental remediation towards sustainable development: An insight into influencing parameters

In this study, a novel 2D/2D nanocomposite of MXene and V2O5 was synthesized using a facile hydrothermal approach for the efficient removal of crystal violet (CV), a textile dye from contaminated water to achieve Sustainable Development Goal (SDG) 14; "Save Lives Below Water". Here, the catalytic performance of pristine MXene was prominently boosted with the introduction of ball milled V2O5 as an electron generating agent. The degradation efficiency of synthesized nanocomposite significantly enhanced from 57 % to 92 %, 41 % - 76 % and 7 % - 58 % with an error of ±2 % as compared to pristine MXene at 10, 20 and 30 ppm concentrations of CV, respectively. The effective degradation of pollutants is ascribed to the electron-transfer via S-scheme based mechanism and helps in reducing recombination rate of photogenerated carriers, which could produce hydroxyl radicals (OH.) as a primary species for effectively degradation of pollutants. The superior performance of nanocomposite is attributed to: (i) the optimized surface charge (-27.8 mV), (ii) small value of charge transfer resistance (Rct = 1.3 Ω), (iii) enhanced value of carrier concentration (6.3 X 1032 cm-3), (iv) small recombination rate of excitons and (v) high specific surface area as compared to pristine samples. Moreover, to strengthen the findings, scavenger study and electron paramagnetic resonance (EPR) study were carried out and concluded that hydroxyl radicals (OH.) are the primary species in the mineralization of CV dye. The values of lande g-factor are calculated using EPR plots which comes out to be 2.03 and 2.04 for (O2.-) and (OH.) radicals, respectively and demonstrates the formation of free radicals during catalytic reactions. The Chemical Oxygen Demand (COD) analysis was carried out before and after the removal of CV using MV nanocomposite and confirms the reduction in COD vlaue of 81.60 %. The reusability experiment confirms stability of synthesized sample and provides a good shred for industrial applications in the treatment of wastewater and getting out cleaner productions and to save marine ecosystem.

PEDOT:PSS-Facilitated Directionally 3-D Assembled MXene-Based Aerogel for High-Performance Chemoresistive Sensing & Breath Analysis

MXene has garnered growing interest in the field of electrochemistry, thanks to its unique electrical and surface characteristics. Nonetheless, significant challenges persist in realizing its full potential in chemoresistive sensing applications. In this study, a novel unidirectional freeze-casting approach for fabricating a Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-facilitated vertically aligned MXene-based aerogel with enhanced chemoresistive sensing properties was introduced. Firstly, the persistent challenge of poor gelation in MXene was addressed by formulating a nanohybrid of MXene and PEDOT:PSS, which acted as flexible conductive nanobinder. Employing a unique freeze-casting method, MXene flakes interconnected by PEDOT:PSS, were stabilized into a flexible, vertically aligned structure, leading to maximum surface exposure and enhanced robustness. The resulting 3-dimentional (3-D) aerogel exhibited a fast, heightened chemoresistive response of 7 to 50 parts per million (ppm) acetone and expanded the working range to between 10 parts per billion (ppb)-8000 ppm. Interfacial heterostructures formed between MXene and PEDOT:PSS, provided active sites, reduced activation energy, and enhanced selectivity. Modulated MXene bandgap, and its electron mobility further facilitated electron transfer, and enhanced signal strength. The sensor showed excellent biocompatibility and was also successfully employed as a breathalyzing tool, for on-demand alcohol consumption monitoring.

Regulating surface terminals and interlayer structure of Ti3C2Tx for superior NH3 sensing

MXene materials have exhibited potential in electrochemistry, particularly in gas sensing, due to their excellent conductivity, large specific surface area of layered materials, and unique functional groups. However, the gas sensing performance of intrinsic 2D MXene materials is often limited by their fluorine-containing terminals and interfacial structure. In this study, based on intrinsic Ti3C2Tx, we employed alkali treatment and annealing to prepare oxygen-rich Ti3C2(OH)x/Ti3C2Ox with expanded interlayer spacing, achieving enhanced gas sensing performance for NH3. The surface chemistry and structure of the sensing materials have been optimized through the synergistic regulation of MXene's unique surface terminations and the intercalation effect of layered materials. Compared to intrinsic Ti3C2Tx, the interlayer spacing of oxygen-rich Ti3C2(OH)x/Ti3C2Ox increased from 9.1 Å to 12.1 Å. The surface terminations of oxygen-rich Ti3C2(OH)x/Ti3C2Ox have been defluorinated and oxygenated. The maximum response value of oxygen-rich Ti3C2(OH)x/Ti3C2Ox to NH3 was 35.66, approximately twice that of the original Ti3C2Tx at an NH3 concentration of 200 ppm. DFT (Density functional theory) calculations and DRIFT (In situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy) tests explained the interaction between the surface terminals and NH3, indicating good selectivity and sensitivity of oxygen-rich Ti3C2(OH)x/Ti3C2Ox to NH3. The results demonstrated that the synergistic effects of surface chemistry and structural engineering are crucial for MXene to optimize the electrochemical performance, particularly the gas sensing performance. This provides a feasible approach for the performance optimization of intrinsic MXene materials.

Ti3C2Tx MXene Functionalized via Boron Doped MoS2 Quantum Dots: A Synergy of Heterojunctions and Doping Effect Enabling Ultrasensitive SO2 Detection at Room Temperature

The design of mixed-dimensional heterostructures has emerged to be a new frontier of research as it induces exciting physical/chemical properties that extend beyond the fundamental properties of single dimensional systems. Therefore, rational design of heterostructured materials with novel surface chemistry and tailored interfacial properties appears to be very promising for the devices such as the gas sensors. Here, a highly sensitive gas sensor device is constructed by employing heterostructures of boron doped molybdenum disulfide quantum dots (B-MoS2 Qdots) assembled into the matrix of Ti3C2Tx MXene. Functionalization of MXene surface with B-MoS2 Qdots as a result of strong electrostatic attraction leads to improved charge migration behavior, active site exposure and abundant specific surface area. As a result, the Ti3C2Tx/B-MoS2 sensor device shows ultra-high response (28,998.3% @ 3 ppm), ultra-fast response rate (23.1% s-1), sub-ppm (10 ppb lowest) detection of sulfur dioxide (SO2) gas and excellent reversibility at room temperature. Density functional theory-based calculations indicate that enhanced SO2 sensing performance results from synergy of the 2D-0D heterostructure formation and preferential adsorption of SO2, induced by doped boron (B) heteroatoms in Qdots. Finally, a portable and wireless SO2 monitoring system is demonstrated for real-time detection of SO2 leakage and quantification under certain circumstances.

Low Power Gas Sensors: From Structure to Application

Gas sensors are pivotal across industries, encompassing environmental monitoring, industrial safety, and healthcare. Recently, a surge in demand for low power gas sensors has emerged, driven by the huge need for applications in portable devices, wireless sensor networks, and the Internet of things (IoT). The practical realization of a densely interconnected sensor network demands gas sensors to have low power consumption for energy-efficient operation. This Perspective offers a comprehensive overview of the progress of low-power sensors for gas and volatile organic compound detection, with a keen focus on the interplay between sensing materials (including metal oxide semiconductors, metal-organic frameworks, and two-dimensional materials), sensor structures, and power consumption. The main gas sensing mechanisms are discussed, and we delve into the mechanisms for achieving low power consumption including material properties and sensor design. Furthermore, typical applications of low power gas sensors are also presented, including wearable technology, food safety, and environmental monitoring. The review will end by discussing some open questions and ongoing needs.

A surface modified laser-induced graphene based flexible biosensor for multiplexed sweat analysis

The growing popularity of electrochemical sensors featuring non-invasive biosensing technologies has generated significant enthusiasm for continuous monitoring of bodily fluid biomarkers, potentially aiding in the early detection of health issues in individuals. However, detection of multiple biomarkers in complex biofluids often necessitates a high-density array which creates a challenge in achieving cost-effective fabrication methods. To overcome this constraint, this work reports the fabrication of an electrochemical sensor utilizing a NiO-Ti3C2Tx MXene-modified flexible laser-induced graphene (LIG) electrode for the separate and concurrent analysis of ascorbic acid (AA), dopamine (DA), and uric acid (UA) in human sweat and also addresses the deficiencies in the existing state of the art by offering a cost-efficient and high-performance sensor that mitigates the degrading constraints of conventional LIG electrodes. Cyclic voltammetry and differential pulse voltammetry measurements reveals that the electrochemical properties of the modified electrode, attain a low detection limit and great sensitivity for the target biomarkers. The NiO-Ti3C2Tx/LIG sensor demonstrated enhanced electrocatalytic activity for the oxidation of ascorbic acid, dopamine, and uric acid, and proved useful for analysing these biomarkers in synthetic sweat samples. Under the optimized conditions, the LOD values were estimated to be 16, 1.97 and 0.78 μM for AA, DA and UA, respectively. The developed high-efficiency sensor holds significant promise for applications in flexible and wearable electronics for health monitoring.

Recent insights on MXene-based architectures for monitoring and sensing of gaseous pollutants: A review

Epidemiology and public health concerns have primarily relied on the accurate control of gas pollutants, requiring highly efficient gas sensor devices for detecting hazardous gases. Despite the dedication of many efforts in this era, the precise, continuous scrutiny of gases remains elusive for appropriate gas selectivity, prompt response and recovery time, proper repeatability, as well as low cost. Accordingly, nanostructured architectural sensing cues have received enormous attention toward versatile detection and sensing procedures. As a representational nanostructure, the MXene family has been widely introduced to tailor and augment sensor patterns by providing large surface area, tunable surface chemistry, superior electrical conductivity, chemical stability, compatibility with flexible substrates, and potential for multifunctionality. Additionally, they could be synthesized in various formations of film and layered designs, fibrous membranes, and gel-like structures, creating synergetic effects that can provide superior gas-sensing performance. Herein, the synthesis and benefits of MXene nanosheets as gas-sensitive materials, in tandem with the past-to-present progress of MXene-based gas sensors in the formation of films, fibrous, and gel-like configurations, are comprehensively reviewed. As an in-depth reference, the present overview could shed light on further advancing gas sensor architectures developed based on MXene structures.

Application of MXene composites for target gas detection in food safety

Food contamination has long plagued agriculture, posing significant health risks to consumers. The use of volatile gases for food safety detection has proven highly effective, with composite gas sensors that leverage the two-dimensional material MXene exhibiting notable advancements in detecting various target gases. This paper reviews the progress of MXene-based composite gas sensors in the detection of food safety-related gases. The review begins by examining MXene material synthesis methods and then presents an overview of techniques aimed at enhancing MXene-based sensor detection capabilities. Recently, advancements in MXene composite gas sensors tailored for food safety gases have been highlighted. Finally, challenges encountered in gas-sensing applications of MXene-based composites are outlined, alongside predictions for their future development, aiming to offer insights for the application and advancement of intelligent gas sensors for target gases in food safety.

High-capacity freestanding supercapacitor electrode based on electrospun Ti3C2Tx MXene/PANI/PVDF composite

In this study, a high-capacity freestanding supercapacitor electrode was developed through electrospinning of a Ti3C2Tx MXene/Polyaniline (PANI)/Polyvinylidene fluoride (PVDF) composite. MXene/PANI composite was achieved through a facile synthesis in which Ti3C2Tx was mixed with PANI Emeraldine salt in N-Methyl-2-Pyrrolidone (NMP) solution using magnetic stirring. PVDF was added to the composite as a flexible binder to facilitate the electrospinning and produce a freestanding electrode. The specific capacitance of the freestanding MXene/PANI/PVDF electrode is 740 Fg-1 at a scan rate of 2 mVs-1, and 895 Fg-1 at a charge-discharge current density of 0.5 Ag-1, which was significantly higher than the specific capacitance of MXene (67 Fg-1) and PANI (54 Fg-1) electrospun electrodes.

Gas sensing performance of Ti3C2Tx MXene heterojunction structures in greenhouse environments: a mini review

With the continuous advancement of smart greenhouse technologies, digital and information-based environmental monitoring has emerged as a focal point of research. The development of high-performance gas sensors is central to achieving this objective. In recent years, MXene materials have been widely applied in the field of gas sensors due to their excellent ion mobility, favorable hydrophilicity, outstanding electronic conductivity, and unique physicochemical properties. Various MXene heterojunction structures have been synthesized for gas detection. This review aims to summarize the current state of research on Ti3C2Tx-based gas sensors, explore methods for synthesizing different morphologies of Ti3C2Tx heterojunction structures, and evaluate the sensing behaviors of these configurations to fully harness their potential for gas monitoring in greenhouse environments. Additionally, an in-depth analysis of the sensing mechanisms associated with Ti3C2Tx heterojunction structures will be provided, offering theoretical support for future investigations. The findings indicate that Ti3C2Tx-based nanomaterials demonstrate considerable promise as high-performance sensors for gas detection in greenhouse settings. This innovative research not only provides new insights into the development of gas sensor technologies but also serves as an important foundation for the digitization of environmental monitoring.

An electrostatically spun cellulose-based self-powered mask with high efficiency air filtration and ammonia sensing

On construction sites impacted by particulate matter and hazardous gases, portable integrated air filtration equipment with high efficiency, minimal pressure drops and ammonia (NH3) alarms is critical. Triboelectric nanogenerators (TENG) present a sustainable solution by generating self-powered electricity to fulfill these requirements. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8) in situ on the surface of titanium carbide (Ti3C2Tx) to create Ti3C2Tx/ZIF-8, grafted it onto cellulose diacetate via tetraethyl orthosilicate, and ultimately developed a cellulose-based nanofibrous membrane through electrospinning, combining it with a negative triboelectric material to construct a self-powered TENG-based mask. The device achieved a balance between a low pressure drop (61 Pa) and high filtration efficiency (99.21 %, 99.71 %, and 99.98 % for PM0.3, PM0.5, and PM1, respectively). Furthermore, the device responds swiftly to NH3; at a concentration of 100 ppm NH3, it achieves a rapid response rate of 83 %, with a response/recovery time as low as 12/14 s. Notably, the device retains its rapid sterilization capability within a short duration (20 min) and demonstrates remarkable stability across its various performance metrics, even after multiple washes. This study presents a novel approach to the development of multi-use, self-powered wearable devices featuring excellent air filtration performance and NH3 detection capabilities.

Multifunctional MXene-modified GelMA hydrogel loaded with hypoxia-induced mesenchymal stem cells derived extracellular vesicles alleviates allergic rhinitis in mice

Allergic rhinitis (AR) has gained an increasing prevalence over the years, a more effective and safe treatment strategy need to be carried out. Hypoxia induced Mesenchymal stem cell derived extracellular vesicles (hEVs) have shown great therapeutic potential for AR, however, their low bioavailability through systemic administration decreased efficacy in clinical application. In the current study, an MXene-modified GelMA hydrogel was developed as a sustained release platform for hEVs. The hEVs-loaded MXene-modified GelMA hydrogel (hEVs@M-GelMA hydrogel) we prepared had rich porous structure, good hydrophilicity, biocompatibility and antibacterial properties, and showed significant inhibitory effect on the generation of reactive oxygen species in vitro. By using AR mice model, we verified that hEVs@M-GelMA hydrogel significantly alleviated AR symptoms, reduced local eosinophil infiltration, inhibited the intensity of nasal oxidative stress response, suppressed the production of OVA-sIgE in blood, decreased IL-4 secretion and promoted IL-10 and IFN-γ expression. This study provides a novel delivery platform for MSC-EVs-based AR therapy.

A critical review of MXene-based composites in the adsorptive and photocatalysis of hexavalent chromium removal from industrial wastewater

The growing concern of water pollution is a critical issue stemming from industrialization and urbanization. One of the specific concerns within this broader problem is the toxicity associated with chromium (Cr), especially in its Cr (VI) form. Transition metal carbides/nitrides (MXenes) are attractive materials for the treatment of water due to their unique properties such as layered structure, high surface area, conductivity, flexibility, scalable manufacture, and surface functions. Adsorption and photocatalysis reactions are the two promising methods for the removal of Cr (VI) by using MXenes. Still, most of the previous reviews were limited to the single application area. Hence, this review covers recent developments in MXene-based composites, highlighting their dual role as both adsorbents and photocatalysts in the removal of Cr (VI). MXene-based composites are found to be effective in both adsorption and photodegradation of Cr (VI). Most MXene-based composites have demonstrated exceptional removal efficiency for Cr (VI), achieving impressive adsorption capacities ranging from 100 to 1500 mg g-1 and degradation percentages between 80% and 100% in a relatively short period. The active functional groups present on the surface of MXene have a viable impact on the adsorption and photodegradation performance. The mechanism of Cr (VI) removal is explained, with MXenes playing a key role in electrostatic attraction for adsorption and as co-catalysts in photocatalysis. However, MXene-based composites have limitations such as instability, competition with co-existing ions, and regeneration challenges. Further research is needed to address these limitations. Additionally, MXene-based composites hold promise for addressing water contamination, heavy metal removal, hydrogen production, energy storage, gas sensing, and biomedical applications.

Carbon-based Flame Retardants for Polymers: A Bottom-up Review

This state-of-the-art review is geared toward elucidating the molecular understanding of the carbon-based flame-retardant mechanisms for polymers via holistic characterization combining detailed analytical assessments and computational material science. The use of carbon-based flame retardants, which include graphite, graphene, carbon nanotubes (CNTs), carbon dots (CDs), and fullerenes, in their pure and functionalized forms are initially reviewed to evaluate their flame retardancy performance and to determine their elevation of the flammability resistance on various types of polymers. The early transition metal carbides such as MXenes, regarded as next-generation carbon-based flame retardants, are discussed with respect to their superior flame retardancy and multifunctional applications. At the core of this review is the utilization of cutting-edge molecular dynamics (MD) simulations which sets a precedence of an alternative bottom-up approach to fill the knowledge gap through insights into the thermal resisting process of the carbon-based flame retardants, such as the formation of carbonaceous char and intermediate chemical reactions offered by the unique carbon bonding arrangements and microscopic in-situ architectures. Combining MD simulations with detailed experimental assessments and characterization, a more targeted development as well as a systematic material synthesis framework can be realized for the future development of advanced flame-retardant polymers.

Novel Gas Sensing Approach: ReS2/Ti3C2Tx Heterostructures for NH3 Detection in Humid Environments

Continuous monitoring of ammonia (NH3) in humid environments poses a notable challenge for gas sensing applications because of its effect on sensor sensitivity. The present work investigates the detection of NH3 in a natural humid environment utilizing ReS2/Ti3C2Tx heterostructures as a sensing platform. ReS2 nanosheets were vertically grown on the surface of Ti3C2Tx sheets through a hydrothermal synthetic approach, resulting in the formation of ReS2/Ti3C2Tx heterostructures. The structural, morphological, and optical properties of ReS2/Ti3C2Tx were investigated using various state-of-the-art techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, zeta potential, Brunauer-Emmett-Teller technique, and Raman spectroscopy. The heterostructures exhibited 1.3- and 8-fold increases in specific surface area compared with ReS2 and Ti3C2Tx, respectively, potentially enhancing the active gas adsorption sites. The electrical investigations of the ReS2/Ti3C2Tx-based sensor demonstrated enhanced selectivity and superior sensing response ranging from 7.8 to 12.4% toward 10 ppm of NH3 within a relative humidity range of 15-85% at room temperature. These findings highlight the synergistic effect of ReS2 and Ti3C2Tx, offering valuable insights for NH3 sensing in environments with high humidity, and are explained in the gas sensing mechanism.

Double-Layer Electronegative Structure-Based Triboelectric Nanogenerator for Enhanced Performance Using Combined Effect of Enhanced Charge Generation and Improved Charge Trapping

The performance of a triboelectric nanogenerator (TENG) device depends on the amount of generated surface charges during triboelectrification and the retention of surface charges. Here, we present the fabrication of a double-layer nanocomposite structure for the electronegative layer in a TENG, which resulted in the enhanced generation of surface charges and retention of generated charges. The double-layer structure is a stack of two different nanocomposite layers, in which the top layer is a nanocomposite of PVDF and MXene and the bottom layer is a nanocomposite layer of PDMS and NaNbO3 nanoparticles. The use of the double-layer structure for the electronegative layer enhanced the generated voltage to 150 V and the current to 4.3 μA, resulting in an output power density of 134 μW/cm2, which is ∼5.8 times higher compared to the performance of a TENG with a single PVDF electronegative layer. Through systematic Kelvin probe force microscopy measurements, it is shown that the introduction of a highly electronegative MXene in the PVDF matrix improved the electron affinity of the friction layer, resulting in enhanced charge generation during contact electrification. The introduction of NaNbO3 ferroelectric nanoparticles in the PDMS matrix is shown to result in enhanced internal polarization and increased trap sites, resulting in the retention of generated surface charges for longer durations. The combined effect of the two layers resulted in a substantial improvement in TENG performance. The application of the TENG device in wireless communication for signal transfer is also presented.

Layer-Dependent Gas Sensing Mechanism of 2D Titanium Carbide (Ti3C2Tx) MXene

Monolayers of Ti3C2Tx MXene and bilayer structures formed by partially overlapping monolayer flakes exhibit opposite sensing responses to a large scope of molecular analytes. When exposed to reducing analytes, monolayer MXene flakes show increased electrical conductivity, i.e., an n-type behavior, while bilayer structures become less conductive, exhibiting a p-type behavior. On the contrary, both monolayers and bilayers show unidirectional sensing responses with increased resistivity when exposed to oxidizing analytes. The sensing responses of Ti3C2Tx monolayers and bilayers are dominated by entirely different mechanisms. The sensing behavior of MXene monolayers is dictated by the charge transfer from adsorbed molecules and the response direction is consistent with the donor/acceptor properties of the analyte and the intrinsic n-type character of Ti3C2Tx. In contrast, the bilayer MXene structures always show the same response regardless of the donor/acceptor character of the analyte, and the resistivity always increases because of the intercalation of molecules between the Ti3C2Tx layers. This study explains the sensing behavior of bulk MXene sensors based on multiflake assemblies, in which this intercalation mechanism results in universal increase in resistance that for many analytes is seemingly inconsistent with the n-type character of the material. By scaling MXene sensors down from multiflake to single-flake level, we disentangled the charge transfer and intercalation effects and unraveled their contributions. In particular, we show that the charge transfer has a much faster kinetics than the intercalation process. Finally, we demonstrate that the layer-dependent gas sensing properties of MXenes can be employed for the design of sensor devices with enhanced molecular recognition.

Recent Advances in Non-Ti MXenes: Synthesis, Properties, and Novel Applications

One of the most fascinating 2D nanomaterials (NMs) ever found is various members of MXene family. Among them, the titanium-based MXenes, with more than 70% of publication-related investigations, are comparatively well studied, producing fundamental foundation for the 2D MXene family members with flexible properties, familiar with a variety of advanced novel technological applications. Nonetheless, there are still more candidates among transitional metals (TMs) that can function as MXene NMs in ways that go well beyond those that are now recognized. Systematized details of the preparations, characteristics, limitations, significant discoveries, and uses of the novel M-based MXenes (M-MXenes), where M stands for non-Ti TMs (M = Sc, V, Cr, Y, Zr, Nb, Mo, Hf, Ta, W, and Lu), are given. The exceptional qualities of the 2D non-Ti MXene outperform standard Ti-MXene in several applications. There is many advancement in top-down as well as bottom-up production of MXenes family members, which allows for exact control of the M-characteristics MXene NMs to contain cutting-edge applications. This study offers a systematic evaluation of existing research, covering everything in producing complex M-MXenes from primary limitations to the characterization and selection of their applications in accordance with their novel features. The development of double metal combinations, extension of additional metal candidates beyond group-(III-VI)B family, and subsequent development of the 2D TM carbide/TMs nitride/TM carbonitrides to 2D metal boride family are also included in this overview. The possibilities and further recommendations for the way of non-Ti MXene NMs are in the synthesis of NMs will discuss in detail in this critical evaluation.

MXene Supported Surface Plasmon Polaritons for Optical Microfiber Ammonia Sensing

The properties of surface plasmons are notoriously dependent on the supporting materials system. However, new capabilities cannot be obtained until the technique of surface plasmon enabled by advanced two-dimensional materials is well understood. Herein, we present the experimental demonstration of surface plasmon polaritons (SPPs) supported by single-layered MXene flakes (Ti3C2Tx) coating on an optical microfiber and its application as an ammonia gas sensor. Enabled by its high controllability of chemical composition, unique atomistically thin layered structure, and metallic-level conductivity, MXene is capable of supporting not only plasmon resonances across a wide range of wavelengths but also a selective sensing mechanism through frequency modulation. Theoretical modeling and optics experiments reveal that, upon adsorbing ammonia molecules, the free electron motion at the interface between the SiO2 microfiber and the MXene coating is modulated (i.e., the modulation of the SPPs under applied light), thus inducing a variation in the evanescent field. Consequently, a wavelength shift is produced, effectively realizing a selective and highly sensitive ammonia sensor with a 100 ppm detection limit. The MXene supported SPPs open a promising path for the application of advanced optical techniques toward gas and chemical analysis.

Research Progress on Ammonia Sensors Based on Ti3C2Tx MXene at Room Temperature: A Review

Ammonia (NH3) potentially harms human health, the ecosystem, industrial and agricultural production, and other fields. Therefore, the detection of NH3 has broad prospects and important significance. Ti3C2Tx is a common MXene material that is great for detecting NH3 at room temperature because it has a two-dimensional layered structure, a large specific surface area, is easy to functionalize on the surface, is sensitive to gases at room temperature, and is very selective for NH3. This review provides a detailed description of the preparation process as well as recent advances in the development of gas-sensing materials based on Ti3C2Tx MXene for room-temperature NH3 detection. It also analyzes the advantages and disadvantages of various preparation and synthesis methods for Ti3C2Tx MXene's performance. Since the gas-sensitive performance of pure Ti3C2Tx MXene regarding NH3 can be further improved, this review discusses additional composite materials, including metal oxides, conductive polymers, and two-dimensional materials that can be used to improve the sensitivity of pure Ti3C2Tx MXene to NH3. Furthermore, the present state of research on the NH3 sensitivity mechanism of Ti3C2Tx MXene-based sensors is summarized in this study. Finally, this paper analyzes the challenges and future prospects of Ti3C2Tx MXene-based gas-sensitive materials for room-temperature NH3 detection.

Flexible vanillin-polyacrylate/chitosan/mesoporous nanosilica-MXene composite film with self-healing ability towards dual-mode sensors

Manufacturing flexible sensors with prominent mechanical properties, multifunctional sensing abilities, and remarkable self-healing capabilities remains a difficult task. In this study, a novel vanillin-modified polyacrylate (VPA), which is capable of forming green dynamic covalent crosslinking with chitosan (CS), was synthesized. The synthesized VPA was combined with mesoporous silica-modified MXene (AMS-MXene) and covalently cross-linked simultaneously with CS, resulting in the formation of a flexible composite conductive film designed for dual-mode sensors. Due to the multidimensional structure formed by the mesoporous silica and MXene layers, the resulting composite film is not only suitable for strain sensing but also excels in gas response sensing. Most importantly, the composite films demonstrate a remarkable self-healing capability through reversible dynamic covalent bonds, specifically Schiff base bonds, coupled with multiple hydrogen bonding interactions with AMS-MXene. This robust self-repair functionality remains effective even at a low temperature of 30 °C. Additionally, the synergistic antibacterial effect exerted by vanillin and CS in the film can endow the composite sensor with excellent antimicrobial properties. This multifunctional composite film holds tremendous potential for applications in green flexible wearable sensors. Furthermore, it can show diverse applications in a wide variety of fields, driving advances in wearable technology and human health monitoring.

Ultra-Flexible, Breathable, and Robust PAN/MWCNTs/PANI Nanofiber Networks for High-Performance Wearable Gas Sensor Application

Wearable gas sensors have drawn great attention for potential applications in health monitoring, minienvironment detection, and advanced soft electronic noses. However, it still remains a great challenge to simultaneously achieve excellent flexibility, high sensitivity, robustness, and gas permeability, because of the inherent limitation of widely used traditional organic flexible substrates. Herein, an electrospinning polyacrylonitrile (PAN) nanofiber network was designed as a flexible substrate, on which an ultraflexible wearable gas sensor was prepared with in situ assembled polyaniline (PANI) and multiwalled carbon nanotubes (MWCNTs) as a sensitive layer. The unique nanofiber network and strong binding force between substrate and sensing materials endow the wearable gas sensor with excellent robustness, flexibility, and gas permeability. The wearable sensor can maintain stable NH3 sensing performance while sustaining extreme bending and stretching (50% of strain). The Young's modulus of wearable PAN/MWCNTs/PANI sensor is as low as 18.9 MPa, which is several orders of magnitude smaller than those of reported flexible sensors. The water vapor transmission rate of the sensor is 0.38 g/(cm2 24 h), which enables the wearing comfort of the sensor. Most importantly, due to the effective exposure of sensing sites as well as the heterostructure effect between MWCNTs and PANI, the sensor shows high sensitivity to NH3 at room temperature, and the theoretical limit of detection is as low as 300 ppb. This work provides a new avenue for the realization of reliable and high-performance wearable gas sensors.

Advancements in MXene Composite Materials for Wearable Sensors: A Review

In recent years, advancements in the Internet of Things (IoT), manufacturing processes, and material synthesis technologies have positioned flexible sensors as critical components in wearable devices. These developments are propelling wearable technologies based on flexible sensors towards higher intelligence, convenience, superior performance, and biocompatibility. Recently, two-dimensional nanomaterials known as MXenes have garnered extensive attention due to their excellent mechanical properties, outstanding electrical conductivity, large specific surface area, and abundant surface functional groups. These notable attributes confer significant potential on MXenes for applications in strain sensing, pressure measurement, gas detection, etc. Furthermore, polymer substrates such as polydimethylsiloxane (PDMS), polyurethane (PU), and thermoplastic polyurethane (TPU) are extensively utilized as support materials for MXene and its composites due to their light weight, flexibility, and ease of processing, thereby enhancing the overall performance and wearability of the sensors. This paper reviews the latest advancements in MXene and its composites within the domains of strain sensors, pressure sensors, and gas sensors. We present numerous recent case studies of MXene composite material-based wearable sensors and discuss the optimization of materials and structures for MXene composite material-based wearable sensors, offering strategies and methods to enhance the development of MXene composite material-based wearable sensors. Finally, we summarize the current progress of MXene wearable sensors and project future trends and analyses.

MXene Key Composites: A New Arena for Gas Sensors

With the development of science and technology, the scale of industrial production continues to grow, and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing. These gases include flammable and explosive gases, and even contain toxic gases. Therefore, it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately. In recent years, a new two-dimensional material called MXene has attracted widespread attention in various applications. Their abundant surface functional groups and sites, excellent current conductivity, tunable surface chemistry, and outstanding stability make them promising for gas sensor applications. Since the birth of MXene materials, researchers have utilized the efficient and convenient solution etching preparation, high flexibility, and easily functionalize MXene with other materials to prepare composites for gas sensing. This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research. However, previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing, without systematically explaining the gas sensing mechanisms generated by different gases, as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials. This article reviews the latest progress in the application of MXene-based composite materials in gas sensing. Firstly, a brief summary was given of the commonly used methods for preparing gas sensing device structures, followed by an introduction to the key attributes of MXene related to gas sensing performance. This article focuses on the performance of MXene-based composite materials used for gas sensing, such as MXene/graphene, MXene/Metal oxide, MXene/Transition metal sulfides (TMDs), MXene/Metal-organic framework (MOF), MXene/Polymer. It summarizes the advantages and disadvantages of MXene composite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases. Finally, future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.

Sensing nature's alarm: SnO2/MXene gas sensor unveils methyl jasmonate signatures of plant insect stress

The incorporation of artificial intelligence into agriculture presents challenges, particularly due to hardware limitations, especially in sensors. Currently, pest detection relies heavily on manual scouting by humans. Therefore, the objective of this study is to create a chemoresistive sensor that enables early identification of the characteristic volatile compound, viz., methyl jasmonate, released during pest infestations. Given the lower reactivity of esters, we have fine-tuned a composite consisting of SnO2 nanoparticles and 2D-MXene sheets to enhance adsorption and selective oxidation, resulting in heightened sensitivity. The optimized composite demonstrated a notable response even at concentrations as low as 120 ppb, successfully confirming pest infestations in tomato crops.

Multiarray Gas Sensors Using Ternary Combined Ti3C2Tx MXene-Based Nanocomposites

This paper reports chemiresistive multiarray gas sensors through the synthesized ternary nanocomposites, using a one-pot method to integrate two-dimensional MXene (Ti3C2Tx) with Ti-doped WO3 (Ti-WO3/Ti3C2Tx) and Ti3C2Tx with Pd-doped SnO2 (Pd-SnO2/Ti3C2Tx). The gas sensors based on Ti-WO3/Ti3C2Tx and Pd-SnO2/Ti3C2Tx exhibit exceptional sensitivity, particularly in detecting 70% at 1 ppm acetone and 91.1% at 1 ppm of H2S. Notably, our sensors demonstrate a remarkable sensing performance in the low-ppb range for acetone and H2S. Specifically, the Ti-WO3/Ti3C2Tx sensor demonstrates a detection limit of 0.035 ppb for acetone, and the Pd-SnO2/Ti3C2Tx sensor shows 0.116 ppb for H2S. Simultaneous measurements with Ti-WO3/Ti3C2Tx- and Pd-SnO2/Ti3C2Tx-based sensors enable the evaluation of both the concentration and type of unknown target gases, such as acetone or H2S. Furthermore, density functional theory calculations are performed to clarify the role of Ti and Pd doping in enhancing the performance of Ti-WO3/Ti3C2Tx and Pd-SnO2/Ti3C2Tx nanocomposites. Theoretical simulations contribute to a deeper understanding of the doping effects, providing essential insights into the mechanisms underlying the enhanced gas response of the gas sensors. Overall, this work provides valuable insights into the gas-sensing mechanisms and introduces a novel approach for high-performance multiarray gas sensing.

α-Fe2O3/TiO2/Ti3C2Tx Nanocomposites for Enhanced Acetone Gas Sensors

Metal oxide semi-conductors are widely applied in various fields due to their low cost, easy processing, and good compatibility with microelectronic technology. In this study, ternary α-Fe2O3/TiO2/Ti3C2Tx nanocomposites were prepared via simple hydrothermal and annealing treatments. The composition, morphology, and crystal structure of the samples were studied using XPS, SEM, EDS, XRD, and multiple other testing methods. The gas-sensing measurement results suggest that the response value (34.66) of the F/M-3 sensor is 3.5 times higher than the pure α-Fe2O3 sensor (9.78) around 100 ppm acetone at 220°C, with a rapid response and recovery time (10/7 s). Furthermore, the sensors have an ultra-low detection limit (0.1 ppm acetone), excellent selectivity, and long-term stability. The improved sensitivity of the composites is mainly attributed to their excellent metal conductivity, the unique two-dimensional layered structure of Ti3C2Tx, and the heterojunction formed between the nanocomposite materials. This research paves a new route for the preparation of MXene derivatives and metal oxide nanocomposites.

Proposals for gas-detection improvement of the FeMPc monolayer towards ethylene and formaldehyde by using bimetallic synergy

Development and fabrication of a novel gas sensor with superb performance are crucial for enabling real-time monitoring of ethylene (C2H4) and formaldehyde (H2CO) emissions from industrial manufacture. Herein, first-principles calculations and AIMD simulations were carried out to investigate the effect of the Fe-M dimer on the adsorption of C2H4 and H2CO on metal dimer phthalocyanine (FeMPc, M = Ti-Zn) monolayers, and the electronic structures and sensing properties of the above adsorption systems were systematically discussed. The results show that the FeMPc (M = Ti, V, Cr, Mn) monolayers interact with C2H4 and H2CO by chemisorption except for the FeMnPc/H2CO system, while the other adsorption systems are all characterized by physisorption. Interestingly, the adsorption strength of C2H4 and H2CO can be effectively regulated by the bimetallic synergy of the Fe-M dimer. Moreover, the FeCrPc and FeMnPc monolayers exhibit excellent sensitivity towards C2H4 and H2CO, and have short recovery time (4.69 ms-2.31 s) for these gases at room temperature due to the effective surface diffusion at 300 K. Consequently, the FeCrPc and FeMnPc materials can be utilized as high-performance, reusable gas sensors for detecting C2H4 and H2CO, and have promising applications in monitoring the release of ethylene and formaldehyde from industrial processes.

Sensitivity-Enhanced, Room-Temperature Detection of NH3 with Alkalized Ti3C2Tx MXene

A layered Ti3C2Tx MXene structure was prepared by etching MAX-phase Ti3AlC2 with hydro-fluoric acid (HF), followed by alkalization in sodium hydroxide (NaOH) solutions of varying concentrations and for varying durations. Compared to sensors utilizing unalkalized Ti3C2Tx, those employing alkalized Ti3C2Tx MXene exhibited enhanced sensitivity for NH3 detection at room temperature and a relative humidity of 40%. Both the concentration of NaOH and duration of alkalization significantly influenced sensor performance. Among the tested conditions, Ti3C2Tx MXene alkalized with a 5 M NaOH solution for 12 h exhibited optimal performance, with high response values of 100.3% and a rapid response/recovery time of 73 s and 38 s, respectively. The improved sensitivity of NH3 detection can be attributed to the heightened NH3 adsorption capability of oxygen-rich terminals obtained through the alkalization treatment. This is consistent with the observed increase in the ratio of oxygen to fluorine atoms on the surface terminations of the alkalization-treated Ti3C2Tx. These findings suggest that the gas-sensing characteristics of Ti3C2Tx MXene can be finely tuned and optimized through a carefully tailored alkalization process, offering a viable approach to realizing high-performance Ti3C2Tx MXene gas sensors, particularly for NH3 sensing applications.

Unveiling the Role of Termination Groups in Stabilizing MXenes in Contact with Water

MXenes are versatile 2D materials demonstrating outstanding electrochemical and physical properties, but their practical use is limited, because of fast degradation in an aqueous environment. To prevent the degradation of MXenes, it is essential to understand the atomistic details of the reaction and to identify active sites. In this letter, we provided a computational analysis of the degradation processes at the interface between MXene basal planes and water using enhanced sampling ab initio molecular dynamics simulations and symbolic regression analysis. Our results indicate that the reactivity of Ti sites toward the water attack reaction depends on both local coordination and chemical composition of the MXene surfaces. Decreasing the work function of the Ti3C2Tx surfaces and avoiding Ti sites that are loosely anchored to the subsurface (e.g., O-coordinated) can improve surface stability. The developed computational framework can be further used to investigate other possible culprits of the degradation reaction, including the role of defects and edges.

Selective Detection of NH3 Gas by Ti3C2Tx Sensors with the PVDF-ZIF-67 Overlayer at Room Temperature

In the realm of NH3 gas-sensing applications, the electrically conductive nature of Ti3C2Tx MXene, adorned with surface terminations such as -O and -OH groups, renders it a compelling material. However, the inherent challenges of atmospheric instability and selectivity in the presence of gas mixtures have prompted the exploration of innovative solutions. This work introduces a strategic solution through the deposition of a mixed-matrix membrane (MMM) composed of poly(vinylidene fluoride) (PVDF) as the matrix and zeolitic imidazolate framework-67 (ZIF-67) as the filler. This composite membrane acts as a selective filter, permitting the passage of a specific gas, namely NH3. Leveraging the hydrophobic and chemically inert nature of PVDF, the MMM enhances the atmospheric stability of Ti3C2Tx by impeding water molecules from interacting with the MXene. Furthermore, ZIF-67 is selective to NH3 gas via acid-base interactions within the zeolite group and selective pore size. The Ti3C2Tx sensor embedded in the MMM filter exhibits a modest 1.3% change in the sensing response to 25 ppm of NH3 gas compared to the response without the filter. This result underscores the filter's effectiveness in conferring selectivity and diffusivity, particularly at 35% relative humidity (RH) and 25 °C. Crucially, the hydrophobic attributes of PVDF impart heightened stability to the Ti3C2Tx sensor even amidst varying RH conditions. These results not only demonstrate effective NH3 detection but also highlight the sensor's adaptability to diverse environmental conditions, offering promising prospects for practical applications.

2D nanomaterials for realization of flexible and wearable gas sensors: A review

Gas sensors are extensively employed for monitoring and detection of hazardous gases and vapors. Many of them are produced on rigid substrates, but flexible and wearable gas sensors are needed for intriguing usage including the internet of things (IoT) and medical devices. The materials with the greatest potential for the fabrication of flexible and wearable gas sensing devices are two-dimensional (2D) semiconducting nanomaterials, which consist of graphene and its substitutes, transition metal dichalcogenides, and MXenes. These types of materials have good mechanical flexibility, high charge carrier mobility, a large area of surface, an abundance of defects and dangling bonds, and, in certain instances adequate transparency and ease of synthesis. In this review, we have addressed the different 2D nonmaterial properties for gas sensing in the context of fabrication of flexible/wearable gas sensors. We have discussed the sensing performance of flexible/wearable gas sensors in various forms such as pristine, composite and noble metal decorated. We believe that content of this review paper is greatly useful for the researchers working in the research area of fabrication of flexible/wearable gas sensors.

Designing State-of-the-Art Gas Sensors: From Fundamentals to Applications

Gas sensors are crucial in environmental monitoring, industrial safety, and medical diagnostics. Due to the rising demand for precise and reliable gas detection, there is a rising demand for cutting-edge gas sensors that possess exceptional sensitivity, selectivity, and stability. Due to their tunable electrical properties, high-density surface-active sites, and significant surface-to-volume ratio, nanomaterials have been extensively investigated in this regard. The traditional gas sensors utilize homogeneous material for sensing where the adsorbed surface oxygen species play a vital role in their sensing activity. However, their performance for selective gas sensing is still unsatisfactory because the employed high temperature leads to the poor stability. The heterostructures nanomaterials can easily tune sensing performance and their different energy band structures, work functions, charge carrier concentration and polarity, and interfacial band alignments can be precisely designed for high-performance selective gas sensing at low temperature. In this review article, we discuss in detail the fundamentals of semiconductor gas sensing along with their mechanisms. Further, we highlight the existed challenges in semiconductor gas sensing. In addition, we review the recent advancements in semiconductor gas sensor design for applications from different perspective. Finally, the conclusion and future perspectives for improvement of the gas sensing performance are discussed.

2D MXenes and their composites; design, synthesis, and environmental sensing applications

Novel 2D layered MXene materials were first reported in 2011 at Drexel University. MXenes are widely used in multidisciplinary applications due to their anomalous electrical conductivity, high surface area, and chemical, mechanical, and physical properties. This review summarises MXene synthesis and applications in environmental sensing. The first section describes different methods for MXene synthesis, including fluorinated and non-fluorinated methods. MXene's layered structure, surface terminal groups, and the space between layers significantly impact its properties. Different methods to separate different MXene layers are also discussed using various intercalation reagents and commercially synthesized MXene without compromising the environment. This review also explains the effect of MXene's surface functionalization on its characteristics. The second section of the review describes gas and pesticide sensing applications of Mxenes and its composites. Its good conductivity, surface functionalization with negatively charged groups, intrinsic chemical nature, and good mechanical stability make it a prominent material for room temperature sensing of environmental samples, such as polar and nonpolar gases, volatile organic compounds, and pesticides. This review will enhance the young scientists' knowledge of MXene-based materials and stimulate their diversity and hybrid conformation in environmental sensing applications.

MXene-Based Chemo-Sensors and Other Sensing Devices

MXenes have received worldwide attention across various scientific and technological fields since the first report of the synthesis of Ti3C2 nanostructures in 2011. The unique characteristics of MXenes, such as superior mechanical strength and flexibility, liquid-phase processability, tunable surface functionality, high electrical conductivity, and the ability to customize their properties, have led to the widespread development and exploration of their applications in energy storage, electronics, biomedicine, catalysis, and environmental technologies. The significant growth in publications related to MXenes over the past decade highlights the extensive research interest in this material. One area that has a great potential for improvement through the integration of MXenes is sensor design. Strain sensors, temperature sensors, pressure sensors, biosensors (both optical and electrochemical), gas sensors, and environmental pollution sensors targeted at volatile organic compounds (VOCs) could all gain numerous improvements from the inclusion of MXenes. This report delves into the current research landscape, exploring the advancements in MXene-based chemo-sensor technologies and examining potential future applications across diverse sensor types.

MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces. One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials. MXenes, a new family of 2D nanomaterials, have been drawing attention since the last decade due to their high electronic conductivity, processability, mechanical robustness and chemical tunability. In this review, we encompass the fabrication of MXene-based polymeric nanocomposites, their structure-property relationship, and applications in the flexible sensor domain. Moreover, our discussion is not only limited to sensor design, their mechanism, and various modes of sensing platform, but also their future perspective and market throughout the world. With our article, we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

Recent Advances in Nanostructured Materials for Application as Gas Sensors

Many different industries, including the pharmaceutical, medical engineering, clinical diagnostic, public safety, and food monitoring industries, use gas sensors. The inherent qualities of nanomaterials, such as their capacity to chemically or physically adsorb gas, and their great ratio of surface to volume make them excellent candidates for use in gas sensing technology. Additionally, the nanomaterial-based gas sensors have excellent selectivity, reproducibility, durability, and cost-effectiveness. This Review article offers a summary of the research on gas sensor devices based on nanomaterials of various sizes. The numerous nanomaterial-based gas sensors, their manufacturing procedures and sensing mechanisms, and most recent advancements are all covered in detail. In addition, evaluations and comparisons of the key characteristics of gas sensing systems made from various dimensional nanomaterials were done.

"Visualization" Gas-Gas Sensors Based on High Performance Novel MXenes Materials

The detection of toxic, harmful, explosive, and volatile gases cannot be separated from gas sensors, and gas sensors are also used to monitor the greenhouse effect and air pollution. However, existing gas sensors remain with many drawbacks, such as lower sensitivity, lower selectivity, and unstable room temperature detection. Thus, there is an imperative need to find more suitable sensing materials. The emergence of a new 2D layered material MXenes has brought dawn to solve this problem. The multiple advantages of MXenes, namely high specific surface area, enriched terminal functionality groups, hydrophilicity, and good electrical conductivity, make them among the most prolific gas-sensing materials. Therefore, this review paper describes the current main synthesis methods of MXenes materials, and focuses on summarizing and organizing the latest research results of MXenes in gas sensing applications. It also introduces the possible gas sensing mechanisms of MXenes materials on NH3 , NO2 , CH3 , and volatile organic compounds (VOCs). In conclusion, it provides insight into the problems and upcoming challenges of MXenes materials for gas sensing.