Anisotropic Electronic Characteristics, Adsorption, and Stability of Low-Index BiVO4 Surfaces for Photoelectrochemical Applications

Alternating 3rd- to 2nd-Order Charge Reaction Kinetics on Bismuth Vanadate Photoanodes with Ultrathin Bismuth Metal-Organic-Frameworks

The most challenging obstacle for photocatalysts to efficiently harvest solar energy is the sluggish surface redox reaction (e. g., oxygen evolution reaction, OER) kinetics, which is believed to originate from interface catalysis rather than the semiconductor photophysics. In this work, we developed a light-modulated transient photocurrent (LMTPC) method for investigating surface charge accumulation and reaction on the W-doped bismuth vanadate (W : BiVO4) photoanodes during photoelectrochemical water oxidation. Under illuminating conditions, the steady photocurrent corresponds to the charge transfer rate/kinetics, while the integration of photocurrent (I~t) spikes during the dark period is regarded as the charge density under illumination. Quantitative analysis of the surface hole densities and photocurrents at 0.6 V vs. reversible hydrogen electrode results in an interesting rate-law kinetics switch: a 3rd-order charge reaction behavior appeared on W : BiVO4, but a 2nd-order charge reaction occurred on W : BiVO4 surface modified with ultrathin Bi metal-organic-framework (Bi-MOF). Consequently, the photocurrent for water oxidation on W : BiVO4/Bi-MOF displayed a 50 % increment. The reaction kinetics alternation with new interface reconstruction is proposed for new mechanism understanding and/or high-performance photocatalytic applications.

Electronic Characteristics, Stability and Water Oxidation Selectivity of High-Index BiVO4 Facets for Photocatalytic Application: A First Principle Study

Some high-index facets of BiVO₄, such as (012), (210), (115), (511), (121), (132) and (231), exhibit much better photocatalytic performance than conventional (010) and (110) surfaces for water splitting. However, the detailed mechanisms and stability of improved photocatalytic performance for these high-index BiVO₄ surfaces are still not clear, which is important for designing photocatalysts with high efficiency. Here, based on first principle calculation, we carried out a systematic theoretical research on BiVO₄ with different surfaces, especially high-index facets. The results show that all of the high-index facets in our calculated systems show an n-type behavior, and the band edge positions indicate that all of the high-index facets have enough ability to produce O₂ without external bias. Electronic structures, band alignments and formation enthalpy indicate that (012), (115) and (132) could be equivalent to (210), (511) and (231), respectively, in the calculation. Oxidation and reduction potential show that only (132)/(231) is stable without strongly oxidative conditions, and the Gibbs free energy indicates that (012)/(210), (115)/(511), (121) and (132)/(231) have lower overpotential than (010) and (110). Our calculation is able to unveil insights into the effects of the surface, including electronic structures, overpotential and stability during the reaction process.

Insight into the Crystal Facet Effect of {101} and {100} Facets of CeVO4 in the Photochemical Property and Photocatalysis

To investigate the photochemical property of specific crystal facets, two well-defined CeVO₄ dodecahedrons with exposed {101} and {100} facets are prepared, which have distinguishing appearances and unequal {101}/{100} area ratios (A_{101}/A_{100}), i.e., compressed dodecahedra (CeVO₄ CD, A_{101}/A_{100} ≈ 1) and elongated dodecahedra (CeVO₄ ED, A_{101}/A_{100} ≈ 0.3). During the visible-light-irradiated process, the {101} and {100} facets are certified to selectively deposit photogenerated holes (h⁺) and electrons (e^-), thus exhibiting the photooxidability and photoreducibility, respectively. Meanwhile, a surface heterojunction could form at the adjacent facet interface and facilitate the spatial separation of carriers. Benefiting from the large exposure extent of the {101} facet and the rational A_{101}/A_{100} (∼1), the CeVO₄ CD shows a superior photocatalytic performance for the degradation of tetracycline to the CeVO₄ ED. Finally, simulation calculations reveal that the energy deviations of the valence band (VB) and conduction band (CB) between CeVO₄{101} and CeVO₄{100} impel the photogenerated h⁺ and e^- to transfer in opposite directions, resulting in the facet-dependent photoactivity of the CeVO₄ dodecahedron.

The role of crystal facets and disorder on photo-electrosynthesis

Photoelectrochemistry has the potential to play a crucial role in the storage of solar energy and the realisation of a circular economy. From a chemical viewpoint, achieving high conversion efficiencies requires subtle control of the catalyst surface and its interaction with the electrolyte. Traditionally, such control has been hard to achieve in the complex multinary oxides used in PEC devices and consequently the mechanisms by which surface exposed facets influence light-driven catalysts are poorly understood. Yet, this understanding is critical to further improve conversion yields and fine-tune reaction selectivities. Here, we review the impact that crystal facets and disorder have on photoelectrochemical reactivity. In particular, we discuss how the crystal orientation influences the energetics of the surface, the existence of defects and the transport of reactive charges, ultimately dictating the PEC activity. Moreover, we evaluate how facet stability dictates the tendency of the solid to undergo reconstructions during catalytic processes and highlight the experimental and computational challenges that must be overcome to characterise the role of the exposed facets and disorder in catalytic performance.

Vacancy defect engineered BiVO4 with low-index surfaces for photocatalytic application: a first principles study

BiVO₄ has been widely investigated as a photocatalyst material for water splitting due to its outstanding photocatalytic properties. In order to further improve its photocatalytic efficiency, it is necessary to conduct an in-depth study of improvement strategies, such as defect engineering. By focusing on the (001) and (011) surfaces, we carried out a systematic theoretical research on pristine and defective systems, including Bi, V and O vacancies. Based on density functional theory (DFT), the electronic properties, band alignments and Gibbs free energy of pristine and defective BiVO₄ have been analyzed. The electronic structures of the (001) and (011) surfaces show different band gaps, and O vacancies make the BiVO₄ become an n-type semiconductor, while Bi and V vacancies tend to form a p-type semiconductor. Moreover, the band edge positions indicate that holes are indeed easily accumulated on the (011) surface while electrons tend to accumulate on (001). However, the (011) surface with Bi and V vacancies does not have enough oxidation potential to oxidize water. The reaction free energy shows that O and Bi vacancies could lower the overpotential to some extent.

Study on adsorption of low-concentration methyl mercaptan by starch-based activated carbon

The development of a low-concentration methyl mercaptan adsorbing material for an efficient decontamination has become a hot research topic. In this study, carbonization activation was employed with starch and urea as carbon and nitrogen sources, respectively, to prepare a type of starch-based activated carbon. Subsequently, the product was used to adsorb low-concentration methyl mercaptan. Based on sorption experiments and molecular simulations, the underlying mechanism of the adsorption effect of the adsorbent's pore structure and surface oxygen- and nitrogen-containing functional groups on methyl mercaptan molecules were discussed. The results indicated that when the methyl mercaptan equilibrium concentration was 0.197 mg/L, the adsorption capacity of SUAC-16-2 for methyl mercaptan was 78.16 mg/g. Its adsorption performance was better than that of its previously reported counterparts. The well-developed microporous structure of SUAC-16-2 promoted the adsorption of methyl mercaptan. In addition, methyl mercaptan molecules could be broken down to produce CH₃S^- and H⁺ by the effect of the surface functional groups. Adjacent carbon atoms containing nitrogen and oxygen functional groups could better adsorb CH₃S^- and H⁺, and further strengthen the methyl mercaptan adsorption performance of activated carbon. The study could help to develop new technology for treatment of low concentration of methyl mercaptan in the air.

Nanoscale Assembly of CdS/BiVO4 Hybrids for Coupling Selective Fine Chemical Synthesis and Hydrogen Production under Visible Light

Simultaneously utilizing photogenerated electrons and holes in one photocatalytic system to synthesize value-added chemicals and clean hydrogen (H₂) energy meets the development requirements of green chemistry. Herein, we report a binary material of CdS/BiVO₄ combining one-dimensional (1D) CdS nanorods (NRs) with two-dimensional (2D) BiVO₄ nanosheets (NSs) constructed through a facile electrostatic self-assembly procedure for the selectively photocatalytic oxidation of aromatic alcohols integrated with H₂ production, which exhibits significantly enhanced photocatalytic performance. Within 2 h, the conversion of aromatic alcohols over CdS/BiVO₄-25 was approximately 9-fold and 40-fold higher than that over pure CdS and BiVO₄, respectively. The remarkably improved photoactivity of CdS/BiVO₄ hybrids is mainly ascribed to the Z-scheme charge separation mechanism in the 1D/2D heterostructure derived from the interface contact between CdS and BiVO₄, which not only facilitates the separation and transfer of charge carriers, but also maintains the strong reducibility of photogenerated electrons and strong oxidizability of photogenerated holes. It is anticipated that this work will further stimulate interest in the rational design of 1D/2D Z-scheme heterostructure photocatalysts for the selective fine chemical synthesis integrated with H₂ evolution.

Effect of cobalt phosphide (CoP) vacancies on its hydrogen evolution activity via water splitting: a theoretical study

Defect engineering plays an important role in improving the performance of catalysts. To clarify the roles of Co and P vacancies in CoP for water splitting, a theoretical study based on density functional theory was carried out in this paper. The geometric and electronic structures, activity and stability of the CoP (101)B surface, CoP (101)B with the Co vacancy (Co_vac) and the P vacancy (P_vac) are investigated. The results indicate that the CoP (101)B surface with P_vac and Co_vac can enhance the electron transfer to the surface. The P_vac will upward shift the Co d-band center near the vacancy site, which promotes the adsorption of H on the Co atom. As a result, the bridge Co-Co sites near the vacancy become the active sites for the hydrogen evolution reaction (HER) (ΔG_H* = 0.01 eV). The loss of the Co atom also results in an upward shift of its d-band center, which will enhance the H adsorption on the adjacent Co sites. The unevenly distributed electrons due to the presence of vacancies on the surface cause spontaneous dissociation of H₂O molecules. Furthermore, the thermodynamic analysis and surface energy find that the CoP (101)B and (101)B facets with Co_vac and P_vac present good stability. The current work has shed light onto the mechanism of water splitting on the surface of phosphide with vacancies. Our study suggests that engineering vacancies on CoP is a feasible route to improve its catalytic activity.

Advanced catalytic CO2 hydrogenation on Ni/ZrO2 with light induced oxygen vacancy formation in photothermal conditions at medium-low temperatures

Selective CH4 formation from CO2 hydrogenation is an appealing yet challenging sunlight-driven or thermal-driven process due to low solar energy utilization efficiency or high energy input.

Zeolitic Imidazolate Framework-67-Derived P-Doped Hollow Porous Co3O4 as a Photocatalyst for Hydrogen Production from Water

As a part of photocatalytic water splitting, the design of low-cost, high-activity catalysts plays an essential role in the development of photocatalytic water splitting. Metal oxides have the advantages of a wide range of sources, many varieties, and easy preparation. Doping engineering on their surface can construct new active sites and adjust their catalytic activity. In this work, a new strategy was developed through anion hybridization to regulate electron delocalization. Using one of the cobalt-based zeolitic imidazole skeletons (ZIF-67) as a precursor material, a two-step calcination method was used to prepare a P-doped Co₃O₄ mixed anion composite photocatalyst. The hydrogen production rate of P@Co₃O₄ is 39 times that of ZIF-67 and 6.8 times that of Co₃O₄. Through density functional theory (DFT) calculations, the electron delocalization state of the sample surface is predicted and the reaction energy barrier is reduced to promote the process of the hydrogen evolution reaction (HER). The special O(δ-)-Co(δ+)-P(δ-) surface bonding state promotes the bridging of isolated electronic states and provides active sites for the adsorption and activation of reaction substrates. The improved electron transport pathway and the synergy between the catalytic sites under the high electron transport rate are the main reasons for the enhanced photocatalytic hydrogen evolution activity. This strategy, including changing the surface bond state and optimizing the structure and composition of the catalyst not only provides a new method for preparing other MOF-derived nanomaterials with porous structures but also inspires the reasonable development of other MOF-based advanced photocatalysts.

NiCo LDH in situ derived NiCoP 3D nanoflowers coupled with a Cu3P p-n heterojunction for efficient hydrogen evolution

With the extensive consumption of non-renewable energy sources, storing solar energy as chemical energy has aroused people's wide concern. In this study, we successfully developed a novel Cu₃P@NiCoP composite photocatalyst to produce hydrogen by splitting water under visible light irradiation. Both the building of a p-n heterojunction between Cu₃P and NiCoP and the three-dimensional nanoflower structure of NiCoP play a vital role in improving the performance of the catalyst. On the one hand, the coupling of Cu₃P and NiCoP built a p-n heterojunction at the photocatalyst interface, and the heterojunction could promote the separation efficiency of photogenerated carriers and prolong the life span of charges, therefore enhancing the photocatalytic hydrogen production activity. On the other hand, the excellent catalytic performance of the photocatalyst was benefited by the flower-like microsphere structure of NiCoP, which could provide abundant active sites and a large specific surface area, and promote the adsorption of protons by the photocatalyst. Besides, the phosphating degree of the precursors and the ratio of Cu₃P and NiCoP were adjusted to get the best photocatalyst for hydrogen production, and the H₂ production of the optimal catalyst could reach 8897.44 μmol h^-1 g^-1. This work provides a new understanding for the rational design of heterojunction photocatalysts for outstanding hydrogen production performance.

Tailoring Electronic Structure and Size of Ultrastable Metalated Metal-Organic Frameworks with Enhanced Electroconductivity for High-Performance Supercapacitors

Utilization of metal-organic frameworks (MOFs) as electrodes for energy storage/conversion is challenging because of the low chemical stability and poor electrical conductivity of MOFs in electrolytes. A nanoscale MOF, Co_0.24 Ni_0.76 -bpa-200, possessing ultrahigh stability with uncommon semiconductor behavior (σ=4.2×10^-3  S m^-1 ) was fabricated. The MOF comprises a robust hydrophobic paddlewheel and an optimized Co/Ni ratio, with consequent control over MOF size and the degree of conjugation of the coligand. A DFT study revealed that appropriate Ni²⁺ doping reduces the activation energy of the system, thus providing a higher carrier concentration, and the strongly delocalized N-donor ligand notably increases the metal-ligand orbital overlap to achieve efficient charge migration, leading to continuous through-bond (-CoNi-N-CoNi-)_∞ conduction paths. These structural features endow the MOF with a good cycling stability of 86.5 % (10 000 cycles) and a high specific capacitance of 1927.14 F g^-1 among pristine MOF-based electrodes.

Reversible Thermochromic Superhydrophobic BiVO4 Hybrid Pigments Coatings with Self-Cleaning Performance and Environmental Stability Based on Kaolinite

The inferior acid resistance and high cost of BiVO₄ pigments seriously hinder their wide applications in some fields. Inspired by the superhydrophobic properties of some plants and insects in nature, the reversible thermochromic superhydrophobic coatings with self-cleaning performance and environmental stability were successfully designed by combining with the surface roughness of kaolinite/BiVO₄ hybrid pigments (Kaol/BiVO₄-HP) and the modification with hexadecyltrimethoxysilane (HDTMS). When the concentration of HDTMS was 4.58 mmol/L, the yellow superhydrophobic coatings exhibited excellent self-cleaning properties and chemical and environmental stability. Furthermore, the superhydrophobic Kaol/BiVO₄-HP coatings exhibited the reversible thermochromic behavior with the change of the external temperatures from room temperature to 270 °C. Interestingly, this facile strategy also can be used to fabricate a series of superhydrophobic clay mineral/BiVO₄-HP coatings based on the different clay minerals, and there was no relationship between the superhydrophobic properties of the coatings and the morphologies of clay minerals, which was different from the reported color superhydrophobic coatings prepared with Maya-like blue pigments. Thus, the low-cost and thermochromic superhydrophobic clay mineral/BiVO₄-HP coatings presented a promising application in temperature sensors and switches with the excellent weather resistance to record and monitor the temperature changes.

Eosin Y-sensitized rose-like MoSx and CeVO4 construct a direct Z-scheme heterojunction for efficient photocatalytic hydrogen evolution

MoS_x/CeVO₄ was prepared by a simple hydrothermal method and a direct Z-scheme heterojunction was constructed. The existence of heterojunction provides a special transmission path for electron transfer between two materials.

Reduction of polycyclic aromatic hydrocarbons (PAHs) emission from household coal combustion using ferroferric oxide as a coal burning additive

Household coal combustion is identified to be the second largest emission source of polycyclic aromatic hydrocarbons (PAHs) in China. In this study, ferroferric oxide (Fe₃O₄) was used as a coal burning additive to reduce PAHs emission from coal combustion in a household coal stove. The results showed that Fe₃O₄ participated in the coal combustion process. The addition of Fe₃O₄ reduced the release of PAHs during the coal combustion process, and could improve the residence capacity of ash residue to these PAHs. Toxic equivalent quantity (TEQ) of PAHs in flue gas from combustion of coal mixed with Fe₃O₄ was less than that from the raw coal combustion. For a typical combustion temperature of 850 °C, the TEQ of PAHs for the mixture of coal and 2.0 wt% Fe₃O₄ decreased 21.98% compared to that for the raw coal. The abundant active surface oxygen species originated from the phase transformation of iron oxides probably accelerated the cracking of PAHs, and hence led to the reduction of PAH emissions and their TEQ. The study could help to develop new technology for reduction of PAHs emission from household coal combustion.

Adsorption behavior of multicomponent volatile organic compounds on a citric acid residue waste-based activated carbon: Experiment and molecular simulation

A considerable amount of volatile organic compounds (VOCs) is emitted, and a vast amount of citric acid residue (CAR) waste is simultaneously produced during citric acid production. Thus, a suitable method realizing the clean production of citric acid must be developed. This study investigated the adsorption of the multicomponent VOCs in a homemade CAR waste-based activated carbon (CAR-AC). A fixed-bed experimental setup was used to explore the adsorption and desorption of single- and multi-component VOCs. Surface adsorption and diffusion molecular models with different defects were built to study the underlying adsorption and diffusion mechanisms of multicomponent VOCs on CAR-AC. The adsorption amount of ethyl acetate in CAR-AC from multicomponent VOCs was 3.04 and 5.91 times higher than those of acetone and acetaldehyde, respectively, and the interaction energy between ethyl acetate and C surfaces was low at -13.41 kcal/mol. During desorption, the most weakly adsorbed acetaldehyde desorbed from the surface of CAR-AC first, followed by acetone and ethyl acetate. The regeneration efficiencies of acetaldehyde, acetone, and ethyl acetate reached 88.77, 85.55, and 91.46 %, respectively, after four adsorption/desorption cycles. We aimed to provide a new strategy to realize the recycle use of CAR and the clean production of citric acid.

Efficient BiVO4 photoanode decorated with Ti3C2TX MXene for enhanced photoelectrochemical sensing of Hg(II) ion

A highly sensitive photoelectrochemical (PEC) sensing platform was constructed for Hg²⁺ determination based on the Schottky heterojunction between an emerging 2D material Ti₃C₂T_X MXene and a promising semiconductor material BiVO₄. Through simply spin-coating the single-layer Ti₃C₂T_X onto the surface of BiVO₄ film, the modified electrode exhibited significantly enhanced PEC activity. However, the boost in photocurrent could be noticeably suppressed due to the consumption of hole-scavenging agents (reduced glutathione) by the added Hg²⁺. Owing to the selective decrease in the photocurrent with the addition of Hg²⁺, the PEC sensor based on BiVO₄/Ti₃C₂T_X displayed a wide linear range from 1 pM to 2 nM with the limit of detection down to 1 pM. Moreover, the PEC sensor also exhibited satisfactory accuracy and repeatability in practical sample water, the Yangtze River water, demonstrating the great potential for monitoring heavy metal ions in natural water resources.

Quasi-degenerate states and their dynamics in oxygen deficient reducible metal oxides

The physical and chemical properties of oxides are defined by the presence of oxygen vacancies. Experimentally, non-defective structures are almost impossible to achieve due to synthetic constraints. Therefore, it is crucial to account for vacancies when evaluating the characteristics of these materials. The electronic structure of oxygen-depleted oxides deeply differs from that of the native forms, in particular, of reducible metal oxides, where excess electrons can localize in various distinct positions. In this perspective, we present recent developments from our group describing the complexity of these defective materials that highlight the need for an accurate description of (i) intrinsic vacancies in polar terminations, (ii) multiple geometries and complex electronic structures with several states attainable at typical working conditions, and (iii) the associated dynamics for both vacancy diffusion and the coexistence of more than one electronic structure. All these aspects widen our current understanding of defects in oxides and need to be adequately introduced in emerging high-throughput screening methodologies.

First-principles investigation of the electronic properties of the Bi2O4(101)/BiVO4(010) heterojunction towards more efficient solar water splitting

First-principles calculations based on density functional theory were carried out to explore the geometric structure, light absorption, charge separation, over-potential and stability of Bi₂O₄ (101)/BiVO₄ (010) heterojunction. The results show that the formed heterojunction can improve visible light utilization and promote transfer of photo-generated holes from BiVO₄ to Bi₂O₄. Furthermore, the Bi⁵⁺ site in the Bi₂O₄(101) surface is energetically more favorable as the photoanode for the oxygen evolution reaction (OER) than the Bi³⁺ sites in Bi₂O₄(101) and BiVO₄(010). At the same time, it is also found that the Bi⁵⁺ in Bi₂O₄(101) are more stable than the Bi³⁺ due to the lower surface energy and stronger bond energy with neighbors. Therefore, forming the Bi₂O₄/BiVO₄ heterojunction can effectively improve the activity and stability of BiVO₄ for water splitting reactions.

Z-scheme 2D-m-BiVO4 networks decorated by a g-CN nanosheet heterostructured photocatalyst with an excellent response to visible light

For economical water splitting and degradation of toxic organic dyes, the development of inexpensive, efficient, and stable photocatalysts capable of harvesting visible light is essential. In this study, we designed a model system by grafting graphitic carbon nitride (g-C₃N₄) (g-CN) nanosheets on the surface of 2D monoclinic bismuth vanadate (m-BiVO₄) nanoplates by a simple hydrothermal method. This as-synthesized photocatalyst has well-dispersed g-CN nanosheets on the surface of the nanoplates of m-BiVO₄, thus forming a heterojunction with a high specific surface area. The degradation rate for bromophenol blue (BPB) shown by BiVO₄/g-CN is 96% and that for methylene blue (MB) is 98% within 1 h and 25 min, respectively. The 2D BiVO₄/g-CN heterostructure system also shows outstanding durability and retains up to ∼95% degradation efficiency for the MB dye even after eight consecutive cycles; the degradation efficiency for BPB does not change too much after eight consecutive cycles as well. The enhanced photocatalytic activities of BiVO₄/g-CN are attributed to the larger surface area, larger number of surface active sites, fast charge transfer and improved separation of photogenerated charge carriers. We proposed a mechanism for the improved photocatalytic performance of the Z-scheme photocatalytic system. The present work gives a good example for the development of a novel Z-scheme heterojunction with good stability and high photocatalytic activity for toxic organic dye degradation and water splitting applications.

For economical water splitting and degradation of toxic organic dyes, the development of inexpensive, efficient, and stable photocatalysts capable of harvesting visible light is essential.

Versatile Nature of Oxygen Vacancies in Bismuth Vanadate Bulk and (001) Surface

Bismuth vanadate (BiVO₄) has emerged as one of the most promising photoanode materials for solar fuel production. Oxygen vacancies play a pivotal role in the photoelectrochemical efficiency, yet their electronic nature and contribution to  n-type conductivity are still under debate. Using first-principles calculations, we show that oxygen vacancies in BiVO₄ have two distinguishable geometric configurations characterized by either undercoordinated, reduced V^IVO₃ and Bi^IIO₇ subunits or a V^IV-O-V^IV/V bridge (split vacancy), quenching the oxygen vacancy site. While both configurations have similar energies in the bulk, the (001) subsurface acts like an energetic sink that stabilizes the split oxygen vacancy by ∼1 eV. The barrierless creation of a bridging V₂O₇ unit allows for partial electron delocalization throughout the near-surface region, consistent with recent experimental observations indicating that BiVO₄(001) is an electron-rich surface.

The Self-Passivation Mechanism in Degradation of BiVO4 Photoanode

BiVO₄ is a promising photoanode material for solar-assisted water splitting in a photoelectrochemical cell but has a propensity to degrade. Investigations carried out here in 0.1 M Na₂SO₄ electrolyte showed that degradation is by dissolution of V in the electrolyte while Bi is retained on the anode probably in the form of solid Bi oxide (Bi₂O₃, Bi₄O₇). Accumulation of Bi oxide on the anode surface leads to passivation from further degradation. Thermodynamic modeling of possible degradation reactions has provided theoretical support to this mechanism. This self-passivation is accompanied by a decrease in photocurrent density, but it protects the anode against extensive photocorrosion and contributes to long-term stability. This is a more definitive understanding of degradation of BiVO₄ during water splitting in a photoelectrochemical cell. This understanding is imperative for both fundamental and applied research.

•

A mechanism of degradation is developed for BiVO₄ photoanode during photolysis

•

Degradation occurs by V dissolution and Bi accumulation on the anode as oxide

•

Accumulating Bi oxide passivates the anode

•

Thermodynamic modeling supports this mechanism

Catalytically Active Sites on Ni5P4 for Efficient Hydrogen Evolution Reaction From Atomic Scale Calculation

Ni₅P₄ has received considerable attention recently as a potentially viable substitute for Pt as the cathode material for catalytic water splitting. The current investigation focuses on theoretical understandings of the characteristics of active sites toward water splitting using first-principle calculations. The results indicate that the activity of bridge NiNi sites is highly related on the bond number with neighbors. If the total bond number of NiNi is higher than 14, the sites will exhibit excellent HER performance. For the top P sites, the activity is greatly affected by the position of coplanar atoms besides the bond number. Data of bond length with neighbors can be used to predict the activity of P sites as reviewed by machine learning. Partial density of state (PDOS) analysis of different P sites illustrates that the activity of P sites should form the appropriate bond to localize some 3p orbits of the P atoms. Bond number and position of neighbors are two key parameters for the prediction of the HER activity. Based on the current work, most of the low-energy surfaces of Ni₅P₄ are active, indicating a good potential of this materials for hydrogen evolution reactions.

Strategies of Anode Materials Design towards Improved Photoelectrochemical Water Splitting Efficiency

This review presents the latest processes for designing anode materials to improve the efficiency of water photolysis. Based on different contributions towards the solar-to-hydrogen efficiency, we mainly review the strategies to enhance the light absorption, facilitate the charge separation, and enhance the surface charge injection. Although great achievements have been obtained, the challenges faced in the development of anode materials for solar energy to make water splitting remain significant. In this review, the major challenges to improve the conversion efficiency of photoelectrochemical water splitting reactions are presented. We hope that this review helps researchers in or coming to the field to better appreciate the state-of-the-art, and to make a better choice when they embark on new research in photocatalytic water splitting.

Crystal Facet Engineering of Photoelectrodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for solar-driven hydrogen production with zero emissions, and it has been intensively studied over the past decades. However, the solar-to-hydrogen (STH) efficiencies of the current PEC systems are still far from the 10% target needed for practical application. The development of efficient photoelectrodes in PEC systems holds the key to achieving high STH efficiencies. In recent years, crystal facet engineering has emerged as an important strategy in designing efficient photoelectrodes for PEC water splitting, which has yet to be comprehensively reviewed and is the main focus of this article. After the Introduction, the second section of this review concisely introduces the mechanisms of crystal facet engineering. The subsequent section provides a snapshot of the unique facet-dependent properties of some semiconductor crystals including surface electronic structures, redox reaction sites, surface built-in electric fields, molecular adsorption, photoreaction activity, photocorrosion resistance, and electrical conductivity. Then, the methods for fabricating photoelectrodes with faceted semiconductor crystals are reviewed, with a focus on the preparation processes. In addition, the notable advantages of the crystal facet engineering of photoelectrodes in terms of light harvesting, charge separation and transfer, and surface reactions are critically discussed. This is followed by a systematic overview of the modification strategies of faceted photoelectrodes to further enhance the PEC performance. The last section summarizes the major challenges and some invigorating perspectives for future research on crystal facet engineered photoelectrodes, which are believed to play a vital role in promoting the development of this important research field.

Enhanced Charge Transport and Increased Active Sites on α-Fe2O3 (110) Nanorod Surface Containing Oxygen Vacancies for Improved Solar Water Oxidation Performance

The effect of oxygen vacancies (V_O) on α-Fe₂O₃ (110) facet on the performance of photoelectrochemical (PEC) water splitting is researched by both experiments and density functional theory (DFT) calculations. The experimental results manifest that the enhancement in photocurrent density by the presence of V_O is related with increased charge separation and charge-transfer efficiencies. The electrochemical analysis reveals that the sample with V_O demonstrates an enhanced carrier density and reduced charge-transfer resistance. The results of DFT calculation indicate that the better charge separation is also contributed by the decrease of potential on the V_O surface, which improves the hole transport from the bulk to the surface. The reduced charge-transfer resistance is owing to the greatly increased number of active sites. The current study provides important insight into the roles of V_O on α-Fe₂O₃ photoanode, especially on its surface catalysis. The generated lesson is also helpful for the improvement of other PEC photoanode materials.

An investigation on the role of W doping in BiVO4 photoanodes used for solar water splitting

W doping has enhanced the photocurrent through increasing the carrier density and lowering surface charge transfer resistance.