Highly Active W2C-Based Composites for the HER in Alkaline Solution: the Role of Surface Oxide Species

The hydrogen evolution reaction (HER) is a crucial electrochemical process for the proposed hydrogen economy since it has the potential to provide pure hydrogen for fuel cells. Nowadays, hydrogen electroproduction is considerably expensive, so promoting the development of new non-noble catalysts for the cathode of alkaline electrolyzers appears as a suitable way to reduce the costs of this technology. In this sense, a series of tungsten-based carbide materials have been synthesized by the urea-glass route as candidates to improve the HER in alkaline media. Moreover, two different pyridinium-based ionic liquids were employed to modify the surface of the carbide grains and control the amount and nature of their surface species. The main results indicate that the catalyst surface composition is modified in the hybrid materials, which are then distinguished by the appearance of tungsten suboxide structures. This implies the action of ionic liquids as reducing agents. Consequently, differential electrochemical mass spectrometry (DEMS) is used to precisely determine the onset potentials and rate-determining steps (RDS) for the HER in alkaline media. Remarkably, the modified surfaces show high catalytic performance (overpotentials between 45 and 60 mV) and RDS changes from Heyrovsky-Volmer to Heyrovsky as the surface oxide structures get reduced. H2O molecule reduction is then faster at tungsten suboxide, which allows the formation of the adsorbed hydrogen at the surface, boosting the catalytic activity and the kinetics of the alkaline HER.

Complementary probes for the electrochemical interface

The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.

ILEOSTIM trial: a study protocol to evaluate the effectiveness of efferent loop stimulation before ileostomy reversal

PURPOSE

A protective loop ileostomy is the most useful method to reduce sequelae in the event of an anastomotic leakage (AL) after rectal cancer surgery. However, it requires an additional stoma reversal surgery with its own potential complications. Postoperative ileus (POI) remains the most common complication after ileostomy reversal, which leads to an increase in morbidity, length of hospital stay (LOS) and overall healthcare costs. Several retrospective studies carried out in this field have concluded that there are insufficient evidence-based recommendations about the routine application of preoperative bowel stimulation in clinical practice. Here we discuss whether stimulation of the efferent limb before ileostomy reversal might reduce POI and improve postoperative outcomes.

METHODS

This is a multicentre randomised controlled trial to determine whether mechanical stimulation of the efferent limb during the 2 weeks before the ileostomy reversal would help to reduce the development of POI after surgery. This study was registered on Clinicaltrials.gov (NCT05302557). Stimulation will consist of infusing a solution of 500 ml of saline chloride solution mixed with a thickening agent (Resource©, Nestlé Health Science; 6.4 g sachet) into the distal limb of the ileostomy loop. This will be performed within the 2 weeks before ileostomy reversal, in an outpatient clinic under the supervision of a trained stoma nurse.

CONCLUSION

The results of this study could provide some insights into the preoperative management of these patients.

Improved Photoelectrochemical Performance of WO3/BiVO4 Heterojunction Photoanodes via WO3 Nanostructuring

WO3/BiVO4 heterojunction photoanodes can be efficiently employed in photoelectrochemical (PEC) cells for the conversion of water into molecular oxygen, the kinetic bottleneck of water splitting. Composite WO3/BiVO4 photoelectrodes possessing a nanoflake-like morphology have been synthesized through a multistep process and their PEC performance was investigated in comparison to that of WO3/BiVO4 photoelectrodes displaying a planar surface morphology and similar absorption properties and thickness. PEC tests, also in the presence of a sacrificial hole scavenger, electrochemical impedance analysis under simulated solar irradiation, and incident photon to current efficiency measurements highlighted that charge transport and charge recombination issues affecting the performance of the planar composite can be successfully overcome by nanostructuring the WO3 underlayer in nanoflake-like WO3/BiVO4 heterojunction electrodes.

Operando IR Optical Control of Localized Charge Carriers in BiVO4 Photoanodes

In photoelectrochemical cells (PECs) the photon-to-current conversion efficiency is often governed by carrier transport. Most metal oxides used in PECs exhibit thermally activated transport due to charge localization via the formation of polarons or the interaction with defects. This impacts catalysis by restricting the charge accumulation and extraction. To overcome this transport bottleneck nanostructuring, selective doping and photothermal treatments have been employed. Here we demonstrate an alternative approach capable of directly activating localized carriers in bismuth vanadate (BiVO4). We show that IR photons can optically excite localized charges, modulate their kinetics, and enhance the PEC current. Moreover, we track carriers bound to oxygen vacancies and expose their ∼10 ns charge localization, followed by ∼60 μs transport-assisted trapping. Critically, we demonstrate that localization is strongly dependent on the electric field within the device. While optical modulation has still a limited impact on overall PEC performance, we argue it offers a path to control devices on demand and uncover defect-related photophysics.

Ultrafast Loss of Lattice Coherence in the Light-Induced Structural Phase Transition of V_{2}O_{3}

In solids, the response of the lattice to photoexcitation is often described by the inertial evolution on an impulsively modified potential energy surface which leads to coherent motion. However, it remains unknown if vibrational coherence is sustained through a phase transition, during which coupling between modes can be strong and may lead to rapid loss of coherence. Here we use coherent phonon spectroscopy to track lattice coherence in the structural phase transition of V_{2}O_{3}. In both the low and high symmetry phases unique coherent phonon modes are generated at low fluence. However, coherence is lost when driving between the low and high symmetry phases. Our results suggest strongly damped noninertial dynamics dominate during the phase transition due to disorder and multimode coupling.

Effects of tetracycline, sulfonamide, fluoroquinolone, and lincosamide load in pig slurry on lettuce: Agricultural and human health implications

The application of pig slurry as fertilizer in agriculture provides nutrients, but it can also contain veterinary medicines, including antibiotic residues (ABs), which can have an ecotoxicological impact on agroecosystems. Furthermore, uptake, translocation, and accumulation of ABs in crops can mobilize them throughout the food chain. This greenhouse study aims to assess AB uptake from soil fertilized with pig slurry and its phenotypical effects on Lactuca sativa L. The plants were cropped in loamy clay soil dosed at 140 kg total N/ha and containing antibiotics (lincomycin, sulfadiazine, oxytetracycline, and enrofloxacin) at different concentration levels (0, 0.05, 0.5, 5, 50, and 500 mg/kg fresh weight, fw). Whereas sulfadiazine (11.8 ng/g fw) was detected in lettuce leaves at the intermediate doses (0.5 mg/kg), lincomycin and its transformation products (hydroxy/sulfate) were only detected at the 50 mg/kg fw dose. In addition, increased AB doses in the pig slurry resulted in decreased lettuce fresh weight and lipid and carbohydrate content and became lethal to lettuce at the highest AB concentrations (500 mg/kg fw). Nevertheless, even at higher doses, the AB content in lettuce following pig-slurry fertilization did not pose any direct significant human health risk (total hazard quotient<0.01). However, the promotion of antimicrobial resistance in humans due to the intake of these vegetables cannot be ruled out.

The role of crystal facets and disorder on photo-electrosynthesis

Photoelectrochemistry has the potential to play a crucial role in the storage of solar energy and the realisation of a circular economy. From a chemical viewpoint, achieving high conversion efficiencies requires subtle control of the catalyst surface and its interaction with the electrolyte. Traditionally, such control has been hard to achieve in the complex multinary oxides used in PEC devices and consequently the mechanisms by which surface exposed facets influence light-driven catalysts are poorly understood. Yet, this understanding is critical to further improve conversion yields and fine-tune reaction selectivities. Here, we review the impact that crystal facets and disorder have on photoelectrochemical reactivity. In particular, we discuss how the crystal orientation influences the energetics of the surface, the existence of defects and the transport of reactive charges, ultimately dictating the PEC activity. Moreover, we evaluate how facet stability dictates the tendency of the solid to undergo reconstructions during catalytic processes and highlight the experimental and computational challenges that must be overcome to characterise the role of the exposed facets and disorder in catalytic performance.

Effect of continuous positive airway pressure in very elderly with moderate-to-severe obstructive sleep apnea pooled results from two multicenter randomized controlled trials

STUDY OBJECTIVE

There is very limited information about the effect of continuous positive airway pressure (CPAP) in the very elderly. Here we aimed to analysed the effect of CPAP on a clinical cohort of patients with obstructive sleep apnea (OSA) ≥80 years old.

METHODS

Post-hoc pooled analysis of two open-label, multicenter clinical trials aimed to determine the effect of CPAP in a consecutive clinical cohort of elderly (≥70 years old) with moderate-to-severe OSA (apnea-hipopnea index ≥15 events/hour) randomized to receive CPAP or no CPAP for three months. Those consecutive patients ≥80 years old were included in the study. The primary endpoint was the change in Epworth Sleepiness scale (ESS). Secondary outcomes included sleep-related symptoms, quality of life, neurocognitive and mood status as well as office blood pressure measurements.

RESULTS

From the initial 369 randomized individuals with ≥70 years, 97 (26.3%) with ≥80 years old were included (47 in the CPAP group and 50 in the no-CPAP group). The mean (SD) age was 81.5 (2.4) years. Average use of CPAP was 4.3 (2.6) hours/night (53% with good adherence) Patients in the CPAP group significantly improved snoring and witnessed apneas as well as AHI (from 41.9 to 4.9 events/hour). However no clinical improvements were seen in ESS (-1.2 points, 95%CI, 0.2 to -2.6), any domain of QSQ, any neurocognitive test, OSA-related symptoms, depression/anxiety or blood pressure levels.

CONCLUSIONS

The present study does not support the use of CPAP in very elderly patients with moderate-to-severe OSA.

Water oxidation kinetics of nanoporous BiVO4 photoanodes functionalised with nickel/iron oxyhydroxide electrocatalysts

In this work, spectroelectrochemical techniques are employed to analyse the catalytic water oxidation performance of a series of three nickel/iron oxyhydroxide electrocatalysts deposited on FTO and BiVO₄, at neutral pH. Similar electrochemical water oxidation performance is observed for each of the FeOOH, Ni(Fe)OOH and FeOOHNiOOH electrocatalysts studied, which is found to result from a balance between degree of charge accumulation and rate of water oxidation. Once added onto BiVO₄ photoanodes, a large enhancement in the water oxidation photoelectrochemical performance is observed in comparison to the un-modified BiVO₄. To understand the origin of this enhancement, the films were evaluated through time-resolved optical spectroscopic techniques, allowing comparisons between electrochemical and photoelectrochemical water oxidation. For all three catalysts, fast hole transfer from BiVO₄ to the catalyst is observed in the transient absorption data. Using operando photoinduced absorption measurements, we find that water oxidation is driven by oxidised states within the catalyst layer, following hole transfer from BiVO₄. This charge transfer is correlated with a suppression of recombination losses which result in remarkably enhanced water oxidation performance relative to un-modified BiVO₄. Moreover, despite similar electrocatalytic behaviour of all three electrocatalysts, we show that variations in water oxidation performance observed among the BiVO₄/MOOH photoanodes stem from differences in photoelectrochemical and electrochemical charge accumulation in the catalyst layers. Under illumination, the amount of accumulated charge in the catalyst is driven by the injection of photogenerated holes from BiVO₄, which is further affected by the recombination loss at the BiVO₄/MOOH interface, and thus leads to deviations from their behaviour as standalone electrocatalysts.

Elucidating the role of charge accumulation and reaction kinetics in governing the performance of Ni/Fe oxyhydroxides as electrocatalysts and as co-catalysts on BiVO₄ photoanodes water oxidation.

Publisher Correction: Spectroelectrochemical study of water oxidation on nickel and iron oxyhydroxide electrocatalysts

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Charge Separation, Band-Bending, and Recombination in WO3 Photoanodes

In metal oxide-based photoelectrochemical devices, the spatial separation of photogenerated electrons and holes is typically attributed to band-bending at the oxide/electrolyte interface. However, direct evidence of such band-bending impacting upon charge carrier lifetimes has been very limited to date. Herein we use ultrafast spectroscopy to track the rapid relaxation of holes in the space-charge layer and their recombination with trapped electrons in WO₃ photoanodes. We observe that applied bias can significantly increase carrier lifetimes on all time scales from picoseconds to seconds and attribute this to enhanced band-bending correlated with changes in oxygen vacancy state occupancy. We show that analogous enhancements in carrier lifetimes can be obtained by changes in electrolyte composition, even in the absence of applied bias, highlighting routes to improve photoconversion yields/performance, through changes in band-bending. This study thus demonstrates the direct connection between carrier lifetime enhancement, increased band-bending, and oxygen vacancy defect state occupancy.

In situ observation of picosecond polaron self-localisation in α-Fe2O3 photoelectrochemical cells

Hematite (α-Fe₂O₃) is the most studied artificial oxygen-evolving photo-anode and yet its efficiency limitations and their origin remain unknown. A sub-picosecond reorganisation of the hematite structure has been proposed as the mechanism which dictates carrier lifetimes, energetics and the ultimate conversion yields. However, the importance of this reorganisation for actual device performance is unclear. Here we report an in situ observation of charge carrier self-localisation in a hematite device, and demonstrate that this process affects recombination losses in photoelectrochemical cells. We apply an ultrafast, device-based optical-control method to resolve the subpicosecond formation of small polarons and estimate their reorganisation energy to be ~0.5 eV. Coherent oscillations in the photocurrent signals indicate that polaron formation may be coupled to specific phonon modes (<100 cm^-1). Our results bring together spectroscopic and device characterisation approaches to reveal new photophysics of broadly-studied hematite devices.

Effect of oxygen deficiency on the excited state kinetics of WO3 and implications for photocatalysis

Using WO₃ as a model material, we investigate how different oxygen vacancy concentrations affect trapping of photogenerated charges and photocatalytic reactions in metal oxides.

Oxygen vacancies are widely used to tune the light absorption of semiconducting metal oxides, but a photophysical framework describing the impact of such point defects on the dynamics of photogenerated charges, and ultimately on catalysis, is still missing. We herein use WO₃ as a model material and investigate the impact of significantly different degrees of oxygen deficiency on its excited state kinetics. For highly oxygen-deficient films, photoelectron spectroscopy shows an over 2 eV broad distribution of oxygen vacancy states within the bandgap which gives rise to extended visible light absorption. We examine the nature of this distribution using first-principles defect calculations and find that defects aggregate to form clusters rather than isolated vacancy sites. Using transient absorption spectroscopy, we observe trapping of photogenerated holes within 200 fs after excitation at high degrees of oxygen deficiency, which increases their lifetime at the expense of oxidative driving force. This loss in driving force limits the use of metal oxides with significant degrees of sub-stoichiometry to photocatalytic reactions that require low oxidation power such as pollutant degradation, and highlights the need to fine-tune vacancy state distributions for specific target reactions.

Structures of the intermediates of Kok's photosynthetic water oxidation clock

Inspired by the period-four oscillation in flash-induced oxygen evolution of photosystem II discovered by Joliot in 1969, Kok performed additional experiments and proposed a five-state kinetic model for photosynthetic oxygen evolution, known as Kok's S-state clock or cycle^1,2. The model comprises four (meta)stable intermediates (S₀, S₁, S₂ and S₃) and one transient S₄ state, which precedes dioxygen formation occurring in a concerted reaction from two water-derived oxygens bound at an oxo-bridged tetra manganese calcium (Mn₄CaO₅) cluster in the oxygen-evolving complex^3-7. This reaction is coupled to the two-step reduction and protonation of the mobile plastoquinone Q_B at the acceptor side of PSII. Here, using serial femtosecond X-ray crystallography and simultaneous X-ray emission spectroscopy with multi-flash visible laser excitation at room temperature, we visualize all (meta)stable states of Kok's cycle as high-resolution structures (2.04-2.08 Å). In addition, we report structures of two transient states at 150 and 400 µs, revealing notable structural changes including the binding of one additional 'water', Ox, during the S₂→S₃ state transition. Our results suggest that one water ligand to calcium (W3) is directly involved in substrate delivery. The binding of the additional oxygen Ox in the S₃ state between Ca and Mn1 supports O-O bond formation mechanisms involving O5 as one substrate, where Ox is either the other substrate oxygen or is perfectly positioned to refill the O5 position during O₂ release. Thus, our results exclude peroxo-bond formation in the S₃ state, and the nucleophilic attack of W3 onto W2 is unlikely.

Individualized lung recruitment maneuver guided by pulse-oximetry in anesthetized patients undergoing laparoscopy: a feasibility study

BACKGROUND

We conducted this study to test whether pulse-oximetry hemoglobin saturation (SpO₂ ) can personalize the implementation of an open-lung approach during laparoscopy. Thirty patients with SpO₂  ≥ 97% on room-air before anesthesia were studied. After anesthesia and capnoperitoneum the FIO₂ was reduced to 0.21. Those patients whose SpO₂ decreased below 97% - an indication of shunt related to atelectasis - completed the following phases: (1) First recruitment maneuver (RM), until reaching lung's opening pressure, defined as the inspiratory pressure level yielding a SpO₂ ≥ 97%; (2) decremental positive end-expiratory (PEEP) titration trial until reaching lung's closing pressure defined as the PEEP level yielding a SpO₂  < 97%; (3) second RM and, (4) ongoing ventilation with PEEP adjusted above the detected closing pressure.

RESULTS

When breathing air, in 24 of 30 patients SpO₂ was < 97%, PaO₂ /FIO₂  ˂ 53.3 kPa and negative end-expiratory transpulmonary pressure (P_TP-EE ). The mean (SD) opening pressures were found at 40 (5) and 33 (4) cmH₂ O during the first and second RM, respectively (P < 0.001; 95% CI: 3.2-7.7). The closing pressure was found at 11 (5) cmH₂ O. This SpO₂ -guided approach increased P_TP-EE (from -6.4 to 1.2 cmH₂ O, P < 0.001) and PaO₂ /FIO₂ (from 30.3 to 58.1 kPa, P < 0.001) while decreased driving pressure (from 18 to 10 cmH₂ O, P < 0.001). SpO₂ discriminated the lung's opening and closing pressures with accuracy taking the reference parameter P_TP-EE (area under the receiver-operating-curve of 0.89, 95% CI: 0.80-0.99).

CONCLUSION

The non-invasive SpO₂ monitoring can help to individualize an open-lung approach, including all involved steps, from the identification of those patients who can benefit from recruitment, the identification of opening and closing pressures to the subsequent monitoring of an open-lung condition.

Stimulated X-Ray Emission Spectroscopy in Transition Metal Complexes

We report the observation and analysis of the gain curve of amplified Kα x-ray emission from solutions of Mn(II) and Mn(VII) complexes using an x-ray free electron laser to create the 1s core-hole population inversion. We find spectra at amplification levels extending over 4 orders of magnitude until saturation. We observe bandwidths below the Mn 1s core-hole lifetime broadening in the onset of the stimulated emission. In the exponential amplification regime the resolution corrected spectral width of ∼1.7  eV FWHM is constant over 3 orders of magnitude, pointing to the buildup of transform limited pulses of ∼1  fs duration. Driving the amplification into saturation leads to broadening and a shift of the line. Importantly, the chemical sensitivity of the stimulated x-ray emission to the Mn oxidation state is preserved at power densities of ∼10^{20}  W/cm^{2} for the incoming x-ray pulses. Differences in signal sensitivity and spectral information compared to conventional (spontaneous) x-ray emission spectroscopy are discussed. Our findings build a baseline for nonlinear x-ray spectroscopy for a wide range of transition metal complexes in inorganic chemistry, catalysis, and materials science.

Kinetics of Photoelectrochemical Oxidation of Methanol on Hematite Photoanodes

The kinetics of photoelectrochemical (PEC) oxidation of methanol, as a model organic substrate, on α-Fe₂O₃ photoanodes are studied using photoinduced absorption spectroscopy and transient photocurrent measurements. Methanol is oxidized on α-Fe₂O₃ to formaldehyde with near unity Faradaic efficiency. A rate law analysis under quasi-steady-state conditions of PEC methanol oxidation indicates that rate of reaction is second order in the density of surface holes on hematite and independent of the applied potential. Analogous data on anatase TiO₂ photoanodes indicate similar second-order kinetics for methanol oxidation with a second-order rate constant 2 orders of magnitude higher than that on α-Fe₂O₃. Kinetic isotope effect studies determine that the rate constant for methanol oxidation on α-Fe₂O₃ is retarded ∼20-fold by H/D substitution. Employing these data, we propose a mechanism for methanol oxidation under 1 sun irradiation on these metal oxide surfaces and discuss the implications for the efficient PEC methanol oxidation to formaldehyde and concomitant hydrogen evolution.

MACVIA-LR (Fighting Chronic Diseases for Active and Healthy Ageing in Languedoc-Roussillon): A Success Story of the European Innovation Partnership on Active and Healthy Ageing

The Région Languedoc Roussillon is the umbrella organisation for an interconnected and integrated project on active and healthy ageing (AHA). It covers the 3 pillars of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA): (A) Prevention and health promotion, (B) Care and cure, (C) and (D) Active and independent living of elderly people. All sub-activities (poly-pharmacy, falls prevention initiative, prevention of frailty, chronic respiratory diseases, chronic diseases with multimorbidities, chronic infectious diseases, active and independent living and disability) have been included in MACVIA-LR which has a strong political commitment and involves all stakeholders (public, private, patients, policy makers) including CARSAT-LR and the Eurobiomed cluster. It is a Reference Site of the EIP on AHA. The framework of MACVIA-LR has the vision that the prevention and management of chronic diseases is essential for the promotion of AHA and for the reduction of handicap. The main objectives of MACVIA-LR are: (i) to develop innovative solutions for a network of Living labs in order to reduce avoidable hospitalisations and loss of autonomy while improving quality of life, (ii) to disseminate the innovation. The three years of MACVIA-LR activities are reported in this paper.

Drop-on-demand sample delivery for studying biocatalysts in action at X-ray free-electron lasers

X-ray crystallography at X-ray free-electron laser sources is a powerful method for studying macromolecules at biologically relevant temperatures. Moreover, when combined with complementary techniques like X-ray emission spectroscopy, both global structures and chemical properties of metalloenzymes can be obtained concurrently, providing insights into the interplay between the protein structure and dynamics and the chemistry at an active site. The implementation of such a multimodal approach can be compromised by conflicting requirements to optimize each individual method. In particular, the method used for sample delivery greatly affects the data quality. We present here a robust way of delivering controlled sample amounts on demand using acoustic droplet ejection coupled with a conveyor belt drive that is optimized for crystallography and spectroscopy measurements of photochemical and chemical reactions over a wide range of time scales. Studies with photosystem II, the phytochrome photoreceptor, and ribonucleotide reductase R2 illustrate the power and versatility of this method.

Spectroelectrochemical analysis of the mechanism of (photo)electrochemical hydrogen evolution at a catalytic interface

Multi-electron heterogeneous catalysis is a pivotal element in the (photo)electrochemical generation of solar fuels. However, mechanistic studies of these systems are difficult to elucidate by means of electrochemical methods alone. Here we report a spectroelectrochemical analysis of hydrogen evolution on ruthenium oxide employed as an electrocatalyst and as part of a cuprous oxide-based photocathode. We use optical absorbance spectroscopy to quantify the densities of reduced ruthenium oxide species, and correlate these with current densities resulting from proton reduction. This enables us to compare directly the catalytic function of dark and light electrodes. We find that hydrogen evolution is second order in the density of active, doubly reduced species independent of whether these are generated by applied potential or light irradiation. Our observation of a second order rate law allows us to distinguish between the most common reaction paths and propose a mechanism involving the homolytic reductive elimination of hydrogen.

Building Bridges for Innovation in Ageing: Synergies between Action Groups of the EIP on AHA

The Strategic Implementation Plan of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) proposed six Action Groups. After almost three years of activity, many achievements have been obtained through commitments or collaborative work of the Action Groups. However, they have often worked in silos and, consequently, synergies between Action Groups have been proposed to strengthen the triple win of the EIP on AHA. The paper presents the methodology and current status of the Task Force on EIP on AHA synergies. Synergies are in line with the Action Groups' new Renovated Action Plan (2016-2018) to ensure that their future objectives are coherent and fully connected. The outcomes and impact of synergies are using the Monitoring and Assessment Framework for the EIP on AHA (MAFEIP). Eight proposals for synergies have been approved by the Task Force: Five cross-cutting synergies which can be used for all current and future synergies as they consider overarching domains (appropriate polypharmacy, citizen empowerment, teaching and coaching on AHA, deployment of synergies to EU regions, Responsible Research and Innovation), and three cross-cutting synergies focussing on current Action Group activities (falls, frailty, integrated care and chronic respiratory diseases).

Structure of photosystem II and substrate binding at room temperature

Light-induced oxidation of water by photosystem II (PS II) in plants, algae and cyanobacteria has generated most of the dioxygen in the atmosphere. PS II, a membrane-bound multi-subunit pigment protein complex, couples the one-electron photochemistry at the reaction centre with the four-electron redox chemistry of water oxidation at the Mn₄CaO₅ cluster in the oxygen-evolving complex (OEC). Under illumination, the OEC cycles through five intermediate S-states (S₀ to S₄), in which S₁ is the dark-stable state and S₃ is the last semi-stable state before O-O bond formation and O₂ evolution. A detailed understanding of the O-O bond formation mechanism remains a challenge, and will require elucidation of both the structures of the OEC in the different S-states and the binding of the two substrate waters to the catalytic site. Here we report the use of femtosecond pulses from an X-ray free electron laser (XFEL) to obtain damage-free, room temperature structures of dark-adapted (S₁), two-flash illuminated (2F; S₃-enriched), and ammonia-bound two-flash illuminated (2F-NH₃; S₃-enriched) PS II. Although the recent 1.95 Å resolution structure of PS II at cryogenic temperature using an XFEL provided a damage-free view of the S₁ state, measurements at room temperature are required to study the structural landscape of proteins under functional conditions, and also for in situ advancement of the S-states. To investigate the water-binding site(s), ammonia, a water analogue, has been used as a marker, as it binds to the Mn₄CaO₅ cluster in the S₂ and S₃ states. Since the ammonia-bound OEC is active, the ammonia-binding Mn site is not a substrate water site. This approach, together with a comparison of the native dark and 2F states, is used to discriminate between proposed O-O bond formation mechanisms.

Evaluation of Surface State Mediated Charge Recombination in Anatase and Rutile TiO2

In nanostructured thin films, photogenerated charge carriers can access the surface more easily than in dense films and thus react more readily. However, the high surface area of these films has also been associated with enhanced recombination losses via surface states. We herein use transient absorption spectroscopy to compare the ultrafast charge carrier kinetics in dense and nanostructured TiO₂ films for its two most widely used polymorphs: anatase and rutile. We find that nanostructuring does not enhance recombination rates on ultrafast time scales, indicating that surface state mediated recombination is not a key loss pathway for either TiO₂ polymorph. Rutile shows faster, and less intensity-dependent recombination than anatase, which we assign to its higher doping density. For both polymorphs, we conclude that bulk rather than surface recombination is the primary determinant of charge carrier lifetime.

Dye-sensitised semiconductors modified with molecular catalysts for light-driven H2 production

Recent progress and basic understanding in the emerging field of dye-sensitised photocatalysis for light-driven hydrogen production is reviewed.

Unravelling the pH-dependence of a molecular photocatalytic system for hydrogen production

The electron-donating ability of the sacrificial agent and the protonation of the catalyst determine the optimum pH for hydrogen production.

Photocatalytic systems for the reduction of aqueous protons are strongly pH-dependent, but the origin of this dependency is still not fully understood. We have studied the effect of different degrees of acidity on the electron transfer dynamics and catalysis taking place in a homogeneous photocatalytic system composed of a phosphonated ruthenium tris(bipyridine) dye (RuP) and a nickel bis(diphosphine) electrocatalyst (NiP) in an aqueous ascorbic acid solution. Our approach is based on transient absorption spectroscopy studies of the efficiency of photo-reduction of RuP and NiP correlated with pH-dependent photocatalytic H₂ production and the degree of catalyst protonation. The influence of these factors results in an observed optimum photoactivity at pH 4.5 for the RuP–NiP system. The electron transfer from photo-reduced RuP to NiP is efficient and independent of the pH value of the medium. At pH <4.5, the efficiency of the system is limited by the yield of RuP photo-reduction by the sacrificial electron donor, ascorbic acid. At pH >4.5, the efficiency of the system is limited by the poor protonation of NiP, which inhibits its ability to reduce protons to hydrogen. We have therefore developed a rational strategy utilising transient absorption spectroscopy combined with bulk pH titration, electrocatalytic and photocatalytic experiments to disentangle the complex pH-dependent activity of the homogenous RuP–NiP photocatalytic system, which can be widely applied to other photocatalytic systems.