Porous Particle-Reinforced Bioactive Gelatin Scaffold for Large Segmental Bone Defect Repairing

Collagen/chitosan/genipin hydrogel loaded with phycocyanin nanoparticles and ND-336 for diabetic wound healing

Diabetic wound healing remains a healthcare challenge due to the overexpression of matrix metalloproteinase-9 (MMP-9) and the imbalance between angiogenic factors and vascular inhibitory factors. In this study, we developed a nanocomposite injectable collagen/chitosan hydrogel for the treatment of delayed diabetic wound healing, which can promote cell migration to the wound site (through the addition of phycocyanin) and reduce the expression of MMP-9 (through the use of ND-336) to improve the therapeutic effect of diabetic wound healing. Furthermore, different weight ratios of collagen and chitosan hydrogels were prepared to select the hydrogel with proper mechanical properties. In vitro experiments confirmed that all hydrogels have favorable biocompatibility and hemocompatibility. Notably, Gel 2, with a weight ratio of collagen and chitosan at 25:75, was found to have an excellent capability to facilitate cell migration and in vivo studies further proved that Gel 2 nanocomposite hydrogel had the best ability to improve diabetic wound healing by promoting cell migration and decreasing MMP-9 expression. The collagen/chitosan/genipin hydrogel loaded phycocyanin and ND-336 can be harnessed for non-toxic and efficient treatment of wound healing management of diabetes.

Proteomics Analysis of Knee Subchondral Bone Identifies Differentially Expressed Proteins Associated with Osteoarthritis

Osteoarthritis (OA) is a prevalent debilitating whole-joint disorder. Currently, a growing number of proteomic studies have been performed to evaluate molecular biomarkers in several tissues from OA patients; however, little is known about the protein profiles in subchondral bone of OA. In this study, proteomic analysis was performed on subchondral bone from patients with OA to identify differentially expressed proteins (DEPs). Bioinformatics tools were used to further investigate these DEPs. Thereafter, DEPs were validated in the samples from patients with OA, as well as in bilateral ovariectomy-induced OA (OVX-OA) rats using immunohistochemistry. A comprehensive subchondral bone proteome profile of patients with OA was constructed. Additionally, biological information analysis showed that a majority of DEPs participated in the dysregulation of the complement and coagulation cascades. The validation experiments suggested that SerpinA5, the protein involved in the complement and coagulation cascades, was significantly increased in severely damaged subchondral bone of patients with OA compared to the control group. Furthermore, the increase of SerpinA5 in OVX-OA rats compared to control rats was also confirmed. Our results indicated that the dysregulation of coagulation and complement pathways plays a role in the progression of OA, and it provides a promising therapeutic target of OA.

Advanced Synthetic Scaffolds Based on 1D Inorganic Micro-/Nanomaterials for Bone Regeneration

Inorganic nanoparticulate biomaterials, such as calcium phosphate and bioglass particles, with chemical compositions similar to that of the inorganic component of natural bone, and hence having excellent biocompatibility and bioactivity, are widely used for the fabrication of synthetic bone graft substitutes. Growing evidence suggests that structurally anisotropic, or 1D inorganic micro-/nanobiomaterials are superior to inorganic nanoparticulate biomaterials in the context of mechanical reinforcement and construction of self-supporting 3D network structures. Therefore, in the past decades, efforts have been devoted to developing advanced synthetic scaffolds for bone regeneration using 1D micro-/nanobiomaterials as building blocks. These scaffolds feature extraordinary physical and biological properties, such as enhanced mechanical properties, super elasticity, multiscale hierarchical architecture, extracellular matrix-like fibrous microstructure, and desirable biocompatibility and bioactivity, etc. In this review, an overview of recent progress in the development of advanced scaffolds for bone regeneration is provided based on 1D inorganic micro-/nanobiomaterials with a focus on their structural design, mechanical properties, and bioactivity. The promising perspectives for future research directions are also highlighted.

Comparison of osteogenic capability of 3D-printed bioceramic scaffolds and granules with different porosities for clinical translation

Pore parameters, structural stability, and filler morphology of artificial implants are key factors influencing the process of bone tissue repair. However, the extent to which each of these factors contributes to bone formation in the preparation of porous bioceramics is currently unclear, with the two often being coupled. Herein, we prepared magnesium-doped wollastonite (Mg-CSi) scaffolds with 57% and 70% porosity (57-S and 70-S) via a 3D printing technique. Meanwhile, the bioceramic granules (57-G and 70-G) with curved pore topography (IWP) were prepared by physically disrupting the 57-S and 70-S scaffolds, respectively, and compared for in vivo osteogenesis at 4, 10, and 16 weeks. The pore parameters and the mechanical and biodegradable properties of different porous bioceramics were characterized systematically. The four groups of porous scaffolds and granules were then implanted into a rabbit femoral defect model to evaluate the osteogenic behavior in vivo. 2D/3D reconstruction and histological analysis showed that significant bone tissue production was visible in the central zone of porous granule groups at the early stage but bone tissue ingrowth was slower in the porous scaffold groups. The bone tissue regeneration and reconstruction capacity were stronger after 10 weeks, and the porous architecture of the 57-S scaffold was maintained stably at 16 weeks. These experimental results demonstrated that the structure-collapsed porous bioceramic is favorable for early-stage osteoconduction and that the 3D topological scaffolds may provide more structural stability for bone tissue growth for a long-term stage. These findings provide new ideas for the selection of different types of porous bioceramics for clinical bone repair.

Plasma-Enabled Graphene Quantum Dot Hydrogel-Magnesium Composites as Bioactive Scaffolds for In Vivo Bone Defect Repair

Bioactive and mechanically stable metal-based scaffolds are commonly used for bone defect repair. However, conventional metal-based scaffolds induce nonuniform cell growth, limiting damaged tissue restoration. Here, we develop a plasma nanotechnology-enhanced graphene quantum dot (GQD) hydrogel-magnesium (Mg) composite scaffold for functional bone defect repair by integrating a bioresource-derived nitrogen-doped GQD (NGQD) hydrogel into the Mg ZK60 alloy. Each scaffold component brings major synergistic advantages over the current alloy-based state of the art, including (1) mechanical support of the cortical bone and calcium deposition by the released Mg2+ during degradation; (2) enhanced uptake, migration, and distribution of osteoblasts by the porous hydrogel; and (3) improved osteoblast adhesion and proliferation, osteogenesis, and mineralization by the NGQDs in the hydrogel. Through an in vivo study, the hybrid scaffold with the much enhanced osteogenic ability induced by the above synergy promotes a more rapid, uniform, and directional bone growth across the hydrogel channel, compared with the control Mg-based scaffold. This work provides insights into the design of multifunctional hybrid scaffolds, which can be applied in other areas well beyond the demonstrated bone defect repair.

Mild Photothermal-Stimulation Based on Injectable and Photocurable Hydrogels Orchestrates Immunomodulation and Osteogenesis for High-Performance Bone Regeneration

A photoactivated bone scaffold integrated with minimally invasive implantation and mild thermal-stimulation capability shows great promise in the repair and regeneration of irregularly damaged bone tissues. Developing multifunctional photothermal biomaterials that can simultaneously serve as both controllable thermal stimulators and biodegradable engineering scaffolds for integrated immunomodulation, infection therapy, and impaired bone repair remains an enormous challenge. Herein, an injectable and photocurable hydrogel therapeutic platform (AMAD/MP) based on alginate methacrylate, alginate-graft-dopamine, and polydopamine (PDA)-functionalized Ti3C2 MXene (MXene@PDA) nanosheets is rationally designed for near-infrared (NIR)-mediated bone regeneration synergistic immunomodulation, osteogenesis, and bacterial elimination. The optimized AMAD/MP hydrogel exhibits favorable biocompatibility, osteogenic activity, and immunomodulatory functions in vitro. The proper immune microenvironment provided by AMAD/MP could further modulate the balance of M1/M2 phenotypes of macrophages, thereby suppressing reactive oxygen species-induced inflammatory status. Significantly, this multifunctional hydrogel platform with mild thermal stimulation efficiently attenuates local immune reactions and further promotes new bone formation without the addition of exogenous cells, cytokines, or growth factors. This work highlights the potential application of an advanced multifunctional hydrogel providing photoactivated on-demand thermal cues for bone tissue engineering and regenerative medicine.

Advanced injectable hydrogels for bone tissue regeneration

Diseases or defects of the skeleton are hazardous because of their specificity and intricacy. Bone tissue engineering has become an important area of research that offers promising new tools for making biomimetic hydrogels that can be used to treat bone diseases. New hydrogels with a distinctive 3D network structure, high water content, and functional capabilities are ranked among the most promising candidates for bone tissue engineering. This makes them helpful in treating cartilage injury, skull deformity, and arthritis. This review will briefly introduce the variety of biocompatible functional hydrogels used in cell culture and bone tissue regeneration. Many gel design concepts, such as crosslinking procedures, controlled release properties, and alternative bionic methodology, were stressed regarding injectable hydrogels to form bone tissue. Hydrogels manufactured from biocompatible materials are a promising option for minimally invasive surgery because of their adaptable physicochemical qualities, ability to fill irregularly shaped defect sites, and ability to grow hormones or release drugs in response to external stimuli. Also included in this overview is a quick rundown of the more practical designs employed in treating bone disorders. Essential details on injectable hydrogel scaffolds for bone tissue regeneration are described in this article.

Hypoxia-induced Wnt/β-catenin signaling activation in subchondral bone osteoblasts leads to an osteoarthritis-like phenotype of chondrocytes in articular cartilage

Background: Osteoarthritis (OA) is a whole-joint disease and characterized by alterations in the articular cartilage, subchondral bone, ligaments, and synovial membrane. The crosstalk between cartilage and subchondral bone plays a crucial role in the pathogenesis and progression of OA. Hypoxia has been reported to play an important role in cartilage degradation and subchondral bone remodeling in OA. In this study, we aimed to identify the involvement of hypoxia in modifying the osteoblast phenotypes and determine whether these alterations could influence the metabolism of chondrocytes. Methods: First, the levels of Hif-1α in subchondral bone of different compartments in patients with OA were assessed using immunohistochemistry (IHC). In in vitro, human primary osteoblasts were cultured under hypoxic and normoxic conditions, and the hypoxic or normoxic conditioned media (HCM and NCM) were used to culture human primary chondrocytes. Then, phenotypic changes in osteoblasts were assessed using reverse transcription-polymerase chain reaction (RT-PCR), Western blotting, and enzyme-linked immunosorbent assay (ELISA). Furthermore, the expression of type II collagen (COL2A1), aggrecan (ACAN), SRY-related high-mobility group-box gene 9 (SOX9), matrix metalloproteinase 13 (MMP13), and matrix metalloproteinase 3 (MMP3) in chondrocytes was measured using RT-PCR. Finally, the serum levels of Wnt-related proteins were determined using ELISA. Results: Hif-1α was significantly increased in severely sclerotic subchondral bone compared to less damaged subchondral bone. β-Catenin and SOST were identified as upregulated and downregulated in hypoxic osteoblasts, respectively. The hypoxia-induced results were confirmed by ELISA. Stimulating human primary chondrocytes with HCM significantly induced MMP13 and MMP3 and inhibited COL2A1, ACAN, and SOX9 mRNA expression. The serum levels of DKK-1 were significantly increased in human OA. Conclusion: Together, these findings revealed that hypoxia in subchondral bone is a key factor in the crosstalk between chondrocytes and osteoblasts and facilitates the shift of chondrocytes toward an OA-like phenotype probably by activating the Wnt/β-catenin signaling pathway in osteoblasts.

The Combination of Platelet Rich Plasma Gel, Human Umbilical Mesenchymal Stem Cells and Nanohydroxyapatite/polyamide 66 Promotes Angiogenesis and Bone Regeneration in Large Bone Defect

BACKGROUND

In the present study, a novel tissue engineering bone graft including platelet rich plasma gel (PRP gel), human umbilical mesenchymal stem cells (HUMSCs) and nanohydroxyapatite/polyamide 66 (nHA-PA66) was constructed. We explored whether the composite scaffolds could enhance the angiogenesis and bone repair capacity in rat femoral large bone defect (LBD). This study aimed to provide evidence for the clinical application of the composite scaffold in LBD treatment.

METHODS

PRP was prepared, the platelets and growth factors were measured. HUMSCs were isolated and identified. the osteogenic capacity of PRP in vitro was measured. Then HUMSCs-PRP-gel/nHA-PA66 composite scaffolds were synthesized and observed. The proliferation and osteogenesis differentiation of HUMSCs on the composite scaffold was measured. The angiogenic capacity of PRP in vitro was measured by capillary-like tube formation assay. Finally, the angiogenesis and bone repair capacity of the composite scaffolds was measured in rat LBD.

RESULTS

PRP contained high level of platelets and growth factors after activation, and promoted osteogenic and angiogenic differentiation in vitro. The HUMSCs-PRP-gel/nHA-PA66 composite scaffold was porosity and promoted the proliferation and osteogenesis differentiation of HUMSCs. At 12th weeks, more micro-vessels and new bone were formed around the composite scaffolds compared with other groups, the defect was almost repaired.

CONCLUSION

Our study for the first time identified that the combination of PRP gel, HUMSCs and nHA-PA66 scaffold could significantly promote angiogenesis and bone regeneration in rat LBD, which may have implications for its further application in clinical LBD treatment.

Regenerative Efficacy of Supercritical Carbon Dioxide-Derived Bone Graft Putty in Rabbit Bone Defect Model

Bone defects can arise from numerous reasons, such as aging, tumor, trauma, infection, surgery, and congenital diseases. Bone grafts are commonly used as a substitute to fill the void and regenerate the defect. Due to its clean and green technology, the supercritical carbon dioxide (SCCO2) extraction aided the production of bone grafts is a recent trend. The SCCO2-derived bone graft has osteoconductive and osteoinductive properties along with excellent biocompatible, nontoxic, bioabsorbable, osteoconductive, and good mechanical properties; however, clinical usage during surgery is time-consuming. Therefore, we produced a putty material combining bone graft powder and acellular dermal matrix (ADM) powder and tested its regenerative efficacy in the critical defect in the rabbit model. The putty was found to retain the tubular structure. In addition, the putty depicted excellent stickiness and cohesiveness in both saline and blood medium. The bone regeneration of bone graft and putty was similar; both had excellent bone healing and regeneration of critical defects as evaluated by the X-ray, microtomography, hematoxylin-eosin, Masson trichrome, and alizarin red staining. Putty contains a less washout rate, good mechanical strength, and biocompatibility. In conclusion, the SCCO2-derived moldable putty could be a promising easy-to-use alternative for bone grafts at present which might have real-world usage in orthopedics as a potential bone void filler and dental socket preservation.

Chimeric protein-mediated dual mineral formation on biopolymer: Non-segregated and well-distributed deposition of CaCO3 and silica particles

Incorporation of biogenic or biocompatible synthetic polymers with inorganic mineral components have been suggested for the preparation of more bioactive materials. However, when two different inorganic minerals such as Ca- and Si-based minerals are introduced onto organic polymers, each mineral is deposited in a segregated form. Here, we presented a biomolecule-mediated preparation method for dual mineral-deposited polymer, in which two inorganic minerals were well-deposited on organic polymer with the aid of biological molecules. A chimeric bio-macromolecules, a fusion protein (CA-SFP) of carbonic anhydrase (CA) and silica-forming peptide (SFP), was designed and used. Surface-immobilized CA-SFP enabled the deposition of CaCO3 and silica nanoparticles on biopolymer without any segregated aggregation. SEM, EDS, FTIR, and swelling ratio analysis indicated that in the developed dual mineral-deposited polymer, each mineral was well-distributed across the polymer surfaces. Investigation by MTS assays, fluorescent imaging, and RT-qPCR revealed that the dual mineral-deposited polymer, when used as bone scaffolds, led to better cell proliferation and differentiation without any significant cytotoxicity compared to the counterparts. These results show that our mineral-deposition method mediated by biomolecules not only overcomes mineral-segregation involving multi-mineral formations, but also facilitates the preparation of highly-bioactive composite materials.

α-Hemihydrate calcium sulfate/n-hydroxyapatite combined with metformin promotes osteogenesis in vitro and in vivo

This study aimed to examine the effects of loading different concentrations of metformin onto an α-hemihydrate calcium sulfate/nano-hydroxyapatite (α-CSH/nHA) composite. The material characteristics, biocompatibility, and bone formation were compared as functions of the metformin concentration. X-ray diffraction results indicated that the metformin loading had little influence on the phase composition of the composite. The hemolytic potential of the composite was found to be low, and a CCK-8 assay revealed only weak cytotoxicity. However, the metformin-loaded composite was found to enhance the osteogenic ability of MC3T3-E1 cells, as revealed by alkaline phosphate and alizarin red staining, real-time PCR, and western blotting, and the optimal amount was 500 µM. RNA sequencing results also showed that the composite material increased the expression of osteogenic-related genes. Cranial bone lacks muscle tissue, and the low blood supply leads to poor bone regeneration. As most mammalian cranial and maxillofacial bones are membranous and of similar embryonic origin, the rat cranial defect model has become an ideal animal model for in vivo experiments in bone tissue engineering. Thus, we introduced a rat cranial defect with a diameter of 5 mm as an experimental defect model. Micro-computed tomography, hematoxylin and eosin staining, Masson staining, and immunohistochemical staining were used to determine the effectiveness of the composite as a scaffold in a rat skull defect model. The composite material loaded with 500 µM of metformin had the strongest osteoinduction ability under these conditions. These results are promising for the development of new methods for repairing craniofacial bone defects.

Nano tantalum-coated 3D printed porous polylactic acid/beta-tricalcium phosphate scaffolds with enhanced biological properties for guided bone regeneration

Bone defects caused by tumors section, traffic accidents, and surgery remain a challenge in clinical. The drawbacks of traditional autografts and allografts limit their clinical application. 3D printed porous scaffolds have monumental potential to repair bone defects but still cannot effectively promote bone formation. Nano tantalum (Ta) has been reported with effective osteogenesis capability. Herein, we fabricated 3D printed PLA/β-TCP scaffold by using the fused deposition modeling (FDM) technique. Ta was doped on the surface of scaffolds utilizing the surface adhesion ability of polydopamine to improve its properties. The constructed PLA/β-TCP/PDA/Ta had good physical properties. In vitro studies demonstrated that the PLA/β-TCP/PDA/Ta scaffolds considerably promote cell proliferation and migration, and it additionally has osteogenic properties. Therefore, Ta doped 3D printed PLA/β-TCP/PDA/Ta scaffold could incontestably improve surface bioactivity and lead to better osteogenesis, which may provide a unique strategy to develop bioactive bespoke implants in orthopedic applications.

Development of Biodegradable Osteopromotive Citrate-Based Bone Putty

The burden of bone fractures demands development of effective biomaterial solutions, while additional acute events such as noncompressible bleeding further motivate the search for multi-functional implants to avoid complications including osseous hemorrhage, infection, and nonunion. Bone wax has been widely used in orthopedic bleeding control due to its simplicity of use and conformation to irregular defects; however, its nondegradability results in impaired bone healing, risk of infection, and significant inflammatory responses. Herein, a class of intrinsically fluorescent, osteopromotive citrate-based polymer/hydroxyapatite (HA) composites (BPLP-Ser/HA) as a highly malleable press-fit putty is designed. BPLP-Ser/HA putty displays mechanics replicating early nonmineralized bone (initial moduli from ≈2-500 kPa), hydration induced mechanical strengthening in physiological conditions, tunable degradation rates (over 2 months), low swelling ratios (<10%), clotting and hemostatic sealing potential (resistant to blood pressure for >24 h) and significant adhesion to bone (≈350-550 kPa). Simultaneously, citrate's bioactive properties result in antimicrobial (≈100% and 55% inhibition of S. aureus and E. coli) and osteopromotive effects. Finally, BPLP-Ser/HA putty demonstrates in vivo regeneration in a critical-sized rat calvaria model equivalent to gold standard autograft. BPLP-Ser/HA putty represents a simple, off-the-shelf solution to the combined challenges of acute wound management and subsequent bone regeneration.

3D printed scaffold design for bone defects with improved mechanical and biological properties

Bone defect treatment is still a challenge in clinics, and synthetic bone scaffolds with adequate mechanical and biological properties are highly needed. Adequate waste and nutrient exchange of the implanted scaffold with the surrounded tissue is a major concern. Moreover, the risk of mechanical instability in the defect area during regular activity increases as the defect size increases. Thus, scaffolds with better mass transportation and mechanical properties are desired. This study introduces 3D printed polymeric scaffolds with a continuous pattern, ZigZag-Spiral pattern, for bone defects treatments. This pattern has a uniform distribution of pore size, which leads to uniform distribution of wall shear stress which is crucial for uniform differentiation of cells attached to the scaffolds. The mechanical, mass transportation, and biological properties of the 3D printed scaffolds are evaluated. The results show that the presented scaffolds have permeability similar to natural bone and, with the same porosity level, have higher mechanical properties than scaffolds with conventional lay-down patterns 0-90° and 0-45°. Finally, human mesenchymal stem cells are seeded on the scaffolds to determine the effects of geometrical microstructure on cell attachment and morphology. The results show that cells in scaffold with ZigZag-Spiral pattern infilled pores gradually, while the other patterns need more time to fill the pores. Considering mechanical, transportation, and biological properties of the considered patterns, scaffolds with ZigZag-Spiral patterns can mimic the properties of cancellous bones and be a better choice for treatments of bone defects.

VEGF-Loaded Heparinised Gelatine-Hydroxyapatite-Tricalcium Phosphate Scaffold Accelerates Bone Regeneration via Enhancing Osteogenesis-Angiogenesis Coupling

Background: Bone tissue defect, one of the common orthopaedicdiseases, is traumatizing and affects patient’s lifestyle. Although autologous and xenograft bone transplantations are performed in bone tissue engineering, clinical development of bone transplantation is limited because ofvarious factors, such as varying degrees of immune rejection, lack of bone sources, and secondary damage to bone harvesting.

Methods: We synthesised a heparinised gelatine-hydroxyapatite-tricalcium phosphate (HG-HA-TCP) scaffold loaded with sustained-release vascular endothelial growth factor (VEGF) analysed their structure, mechanical properties, and biocompatibility. Additionally, the effects of HG-HA-TCP (VEGF) scaffolds on osteogenic differentiation and vascularisation of stem cells from human exfoliated deciduous teeth (SHED) in vitro and bone regeneration in vivo were investigated.

Results: HG-HA-TCP scaffold possessed good pore structure, mechanical properties, and biocompatibility. HG-HA-TCP scaffold loaded with VEGF could effectively promote SHED proliferation, migration, and adhesion. Moreover, HG-HA-TCP (VEGF) scaffold increased the expression of osteogenesis- and angiogenesis-related genes and promoted osteogenic differentiation and vascularisation in cells. In vivo results demonstrated that VEGF-loaded HG-HA-TCP scaffold improved new bone regeneration and enhanced bone mineral density, revealed byhistological, micro-CT and histochemical straining analyses. Osteogenic and angiogenic abilities of the three biological scaffolds wereranked as follows: HG-HA-TCP (VEGF) > G-HA-TCP (VEGF) > G-HA-TCP.

Conclusion: HG-HA-TCP (VEGF) scaffold with good biocompatibility could create an encouraging osteogenic microenvironment that could accelerate vessel formation and osteogenesis, providing an effective scaffold for bone tissue engineering and developing new clinical treatment strategies for bone tissue defects.

Customized Design 3D Printed PLGA/Calcium Sulfate Scaffold Enhances Mechanical and Biological Properties for Bone Regeneration

Polylactic glycolic acid copolymer (PLGA) has been widely used in tissue engineering due to its good biocompatibility and degradation properties. However, the mismatched mechanical and unsatisfactory biological properties of PLGA limit further application in bone tissue engineering. Calcium sulfate (CaSO₄) is one of the most promising bone repair materials due to its non-immunogenicity, well biocompatibility, and excellent bone conductivity. In this study, aiming at the shortcomings of activity-lack and low mechanical of PLGA in bone tissue engineering, customized-designed 3D porous PLGA/CaSO₄ scaffolds were prepared by 3D printing. We first studied the physical properties of PLGA/CaSO₄ scaffolds and the results showed that CaSO₄ improved the mechanical properties of PLGA scaffolds. In vitro experiments showed that PLGA/CaSO₄ scaffold exhibited good biocompatibility. Moreover, the addition of CaSO₄ could significantly improve the migration and osteogenic differentiation of MC3T3-E1 cells in the PLGA/CaSO₄ scaffolds, and the PLGA/CaSO₄ scaffolds made with 20 wt.% CaSO₄ exhibited the best osteogenesis properties. Therefore, calcium sulfate was added to PLGA could lead to customized 3D printed scaffolds for enhanced mechanical properties and biological properties. The customized 3D-printed PLGA/CaSO₄ scaffold shows great potential for precisely repairing irregular load-bearing bone defects.

Template synthesis of dual-functional porous MoS2 nanoparticles with photothermal conversion and catalytic properties

Advanced catalysis triggered by photothermal conversion effects has aroused increasing interest due to its huge potential in environmental purification. In this work, we developed a novel approach to the fast degradation of 4-nitrophenol (4-Nip) using porous MoS₂ nanoparticles as catalysts, which integrate the intrinsic catalytic property of MoS₂ with its photothermal conversion capability. Using assembled polystyrene-b-poly(2-vinylpyridine) block copolymers as soft templates, various MoS₂ particles were prepared, which exhibited tailored morphologies (e.g., pomegranate-like, hollow, and open porous structures). The photothermal conversion performance of these featured particles was compared under near-infrared (NIR) light irradiation. Intriguingly, when these porous MoS₂ particles were further employed as catalysts for the reduction of 4-Nip, the reaction rate constant was increased by a factor of 1.5 under NIR illumination. We attribute this catalytic enhancement to the open porous architecture and light-to-heat conversion performance of the MoS₂ particles. This contribution offers new opportunities for efficient photothermal-assisted catalysis.

Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics

Polymeric hydrogels are fascinating platforms as 3D scaffolds for tissue repair and delivery systems of therapeutic molecules and cells. Among others, methacrylated gelatin (GelMA) has become a representative hydrogel formulation, finding various biomedical applications. Recent efforts on GelMA-based hydrogels have been devoted to combining them with bioactive and functional nanomaterials, aiming to provide enhanced physicochemical and biological properties to GelMA. The benefits of this approach are multiple: i) reinforcing mechanical properties, ii) modulating viscoelastic property to allow 3D printability of bio-inks, iii) rendering electrical/magnetic property to produce electro-/magneto-active hydrogels for the repair of specific tissues (e.g., muscle, nerve), iv) providing stimuli-responsiveness to actively deliver therapeutic molecules, and v) endowing therapeutic capacity in tissue repair process (e.g., antioxidant effects). The nanomaterial-combined GelMA systems have shown significantly enhanced and extraordinary behaviors in various tissues (bone, skin, cardiac, and nerve) that are rarely observable with GelMA. Here we systematically review these recent efforts in nanomaterials-combined GelMA hydrogels that are considered as next-generation multifunctional platforms for tissue therapeutics. The approaches used in GelMA can also apply to other existing polymeric hydrogel systems.

Conductive photothermal non-swelling nanocomposite hydrogel patch accelerating bone defect repair

Bone defect repair is one of the most common issue in clinic. Developmental multifunctional scaffolds have become a promising strategy to effectively promote bone defect repair. Here, a series of...

Bioinspired Redwood-Like Scaffolds Coordinated by In Situ-Generated Silica-Containing Hybrid Nanocoatings Promote Angiogenesis and Osteogenesis both In Vitro and In Vivo

Inspired by natural redwood and bone, a biomimetic strategy is presented to develop a highly bioactive redwood-like nanocomposite via radial freeze casting of biocompatible hydrogels followed by the in situ coprecipitation of a Si-containing CaP hybrid nanocoating (SCPN). The engineered material displays radially aligned macrochannels and a porous network structure similar to those of natural redwood. In addition to acting as a mechanical reinforcement, introducing SCPNs into the weak redwood-like scaffold yields not only a nanoroughened surface topography, a low swelling ratio, retarded enzymatic degradation, and enhanced protein absorption abilities but also the sustained sequential release of Si and Ca ions, thereby providing essential biophysical and biochemical cues for effective bone regeneration. Benefiting from the redwood-like structures and bioactive SCPNs, the biomimetic materials create a favorable microenvironment for promoting the initial adhesion, spreading, proliferation, and migration of bone marrow-derived mesenchymal stem cells and human umbilical vein endothelial cells. Furthermore, the in vitro and in vivo data showed that the biocompatible redwood-like scaffold with precipitated SCPN can synergistically promote osteogenesis and angiogenesis in their aligned direction. Collectively, this work presents a novel bioinspired redwood-like material with multifunctional properties that provides new insight into bone defect repair.

High efficacy of tetra-PEG hydrogel sealants for sutureless dural closure

Advances in meticulous dural closure technique remain a great challenge for watertight dural closure in the aged society, because the cerebrospinal fluid (CSF) leakage after spinal surgery is often accompanied with the disgusting wound infection, meningitis and pseudomeningocele. Here, a tetra-poly (ethylene glycol) (PEG)-based hydrogel sealant is developed with collective advantages of facile operation, high safety, quick set time, easy injectability, favorable mechanical strength and powerful tissue adhesion for effective sutureless dural closure during the surgery procedure. Impressively, this tetra-PEG sealant can instantaneously adhere to the irregular tissue surfaces even in a liquid environment, and effectively prevent or block off the intraoperative CSF leakage for sutureless dural closure and dura regeneration. Together, this sutureless tetra-PEG adhesive can be utilized as a very promising alternative for high-efficient watertight dural closure of the clinical patients who incidentally or deliberately undergo the durotomy during the spinal surgery.

The effect of enhanced bone marrow in conjunction with 3D-printed PLA-HA in the repair of critical-sized bone defects in a rabbit model

Background

Traditionally, the iliac crest has been the most common harvesting site for autologous bone grafts; however, it has some limitations, including poor bone availability and donor-site morbidity. This study sought to explore the effect of enhanced bone marrow (eBM) in conjunction with three-dimensional (3D)-printed polylactide–hydroxyapatite (PLA-HA) scaffolds in the repair of critical-sized bone defects in a rabbit model.

Methods

First, 3D-printed PLA-HA scaffolds were fabricated and evaluated using micro-computed tomography (µCT) and scanning electron microscopy (SEM). Twenty-seven New Zealand white rabbits were randomly divided into 3 groups (n=9 per group), and the defects were treated using 3D-printed PLA-HA scaffolds (the PLA-HA group) or eBM in conjunction with 3D-printed PLA-HA scaffolds (the PLA-HA/eBM group), or were left untreated (the control group). Radiographic, µCT, and histological analyses were performed to evaluate bone regeneration in the different groups.

Results

The 3D-printed PLA-HA scaffolds were cylindrical, and had a mean pore size of 500±47.1 µm and 60%±3.5% porosity. At 4 and 8 weeks, the lane-sandhu X-ray score in the PLA-HA/eBM group was significantly higher than that in the PLA-HA group and the control group (P<0.01). At 8 weeks, the µCT analysis showed that the bone volume (BV) and bone volume/tissue volume (BV/TV) in the PLA-HA/eBM group were significantly higher than those in the PLA-HA group and the control group (P<0.01). Hematoxylin and eosin staining indicated that the new bone area in the PLA-HA/eBM group was significantly higher than that in the PLA-HA group and the control group (P<0.01).

Conclusions

The group that was treated with eBM in conjunction with 3D-printed PLA-HA showed enhanced bone repair compared to the other 2 groups. PLA-HA/eBM scaffolds represent a promising way to treat critical-sized bone defects.

Naringin-inlaid silk fibroin/hydroxyapatite scaffold enhances human umbilical cord-derived mesenchymal stem cell-based bone regeneration

OBJECTIVES

Large bone defects are a common, debilitating clinical condition that have substantial global health and economic burden. Bone tissue engineering technology has become one of the most promising approaches for regenerating defective bones. In this study, we fabricated a naringin-inlaid composite silk fibroin/hydroxyapatite (NG/SF/HAp) scaffold to repair bone defects.

MATERIALS AND METHODS

The salt-leaching technology was used to fabricate the NG/SF/HAp scaffold. The cytocompatibility of the NG/SF/HAp scaffold was assessed using scanning electron microscopy, live/dead cell staining and phalloidin staining. The osteogenic and angiogenic properties were assessed in vitro and in vivo.

RESULTS

The porous NG/SF/HAp scaffold had a well-designed biomimetic porous structure with osteoinductive and angiogenic activities. A gene microarray identified 854 differentially expressed genes between human umbilical cord-derived mesenchymal stem cells (hUCMSCs) cultured on SF-nHAp scaffolds and cells cultured on NG/SF/HAp scaffolds. The underlying osteoblastic mechanism was investigated using hUCMSCs in vitro. Naringin facilitated hUCMSC ingrowth into the SF/HAp scaffold and promoted osteogenic differentiation. The osteogenic and angiogenic capabilities of cells cultured in the NG/SF/HAp scaffold were superior to those of cells cultured in the SF/HAp scaffold.

CONCLUSIONS

The data indicate the potential of the SF/HAp composite scaffold incorporating naringin for bone regeneration.

Biomimetic hydroxyapate/polydopamine composites with good biocompatibility and efficiency for uncontrolled bleeding

Uncontrolled bleeding is thought to be the most deadly cause of pre-hospital, traffic, and military accidents death. However, the popular commercial hemostats can only realize the hemostasis of mild bleeding. Therefore, we developed polydopamine (PDA) composite materials (PMs), which applied hydroxyapatite as the parent body. The PMs were produced via lyophilization and functionalized with amino, phenol hydroxyls groups, which endowed hydrophobicity to materials. This ensured a high aggregation ability of blood cells to the PMs and they were tested to be as high as 300% compared with the negative control group. The clotting time was shortened to 79.7% compared with the usually used commercial hemostat (Celox) in the test of in vitro hemostasis. Through the results of PT and APTT tests, blood coagulation index test, and the analysis of intracellular Ca²⁺ activation, we further understood the mechanism of the hemostasis of the materials, which explained the low blood loss and quick coagulation time of the PM hemostats in detail. Besides, the low hemolysis and cytotoxicity of the PMs suggested the good biocompatibility of the hemostats, which was further proved by the regular morphology maintained by erythrocytes in the hemolysis tests. The study of nanoscale composites led the research for the methods of hemostasis.

Experimental study on repair of large segmental bone defects of goat femur by nano calcium-deficient hydroxyapatite-multi (amino acid) copolymer membrane tubes

OBJECTIVE

The purpose of this study was to observe feasibility of nano calcium-deficient hydroxyapatite-multi (amino acid) copolymer (n-CDHA-MAC) membrane tubes in repairing goat femurs' large defects.

METHODS

Twelve goats were divided into two groups, whose femurs were created 30 mm segmental bone defects and then implants were performed. In experimental group, the bone defect of right femur was reconstructed by n-CDHA-MAC membrane tube, while left side was reconstructed by allogenic bone tube in control group. Every three goats were sacrificed at 4, 8, 16, 24 weeks after operation respectively. General observation, X-ray analysis, histology, Scanning electron microscope (SEM) examination and protein level comparison of BMP-2 were conducted to evaluate the effects of repairing segmental bone defects.

RESULTS

All goats recovered well from anesthesia and surgical interventions. The radiographic evaluations showed that periosteal reaction outside of the membrane tubes and allogenic bone tubes were observed 4 weeks after surgery. At 16 weeks, callus was continuously increased in experimental group, which was more obvious than control group. At 24 weeks, callus outside of the membrane tubes connected together. Histologic evaluation showed fibro-cartilage callus was evolved into bony callus in experimental group, which was more obvious than control group at 8 and 16 weeks. The protein expression level of BMP-2 increased at 4, 8 weeks and peaked at 16 weeks in experimental groups. There were statistical differences at 8 and 16 weeks (P < 0.05). At each time point in 8, 16, 24 weeks after surgery, the bending stiffness, torsional stiffness and compressive strength of the two groups were similar, and there was no significant difference (P > 0.05).

CONCLUSIONS

This novel surface degradation n-CDHA-MAC membrane tube has good ability to maintain enough membrane space, which can provide long-term and stable biomechanical support for large bone defects and integrate well with the surrounding bone.

Hofmeister Effect-Assistant Fabrication of All-Natural Protein-based Porous Materials Templated from Pickering Emulsions

Porous materials derived from natural and biodegradable polymers have received growing interest. We demonstrate here an attractive method for the preparation of protein-based porous materials using emulsions stabilized by gliadin-chitosan hybrid particles (GCHPs) as the template, with the addition of gelatin and kosmotropic ions to improve the mechanical strength. The microstructure, mechanical properties, cytotoxicity, and fluid absorption behavior of porous materials were systematically investigated. This strategy facilitated the formation of porous materials with highly open and interconnected pore structure, which can be manipulated by altering the mass ratio of hexane or gelatin in the matrix. The Hofmeister effect resulted from kosmotropic ions greatly enhanced the Young's modulus and the compressive stress at 40% strain of porous materials from 0.56 to 6.84 MPa and 0.26 to 1.11 MPa, respectively. The developed all-natural porous materials were nontoxic to HaCaT cells; they also had excellent liquid (i.e., simulated body fluid and rabbit blood) absorption performance and advantages in resisting stress and maintaining geometry shape. The effects of different concentration amounts and type of salts in the Hofmeister series on the formation and performance of porous materials were also explored. Mechanical strength of porous materials was gradually enhanced when the (NH₄)₂SO₄ concentration increased from 0 to 35 wt %, and the other four kosmotropic salts, including Na₂S₂O₃, Na₂CO₃, NaH₂PO₄, and Na₂SO₄, also showed positive effects. This work opens a simple and feasible way to produce nontoxic and biodegradable porous materials with favorable mechanical strength and controllable pore structure. These materials have broad potential application in many fields involving biomedical and material science, such as cell culture, (bio)catalysis, and wound or bone defect healing.

Biomimetic mineralization of novel hydroxyethyl cellulose/soy protein isolate scaffolds promote bone regeneration in vitro and in vivo

Although various strategies have been utilized to accelerate bone regeneration in bone tissue engineering (BTE), the treatment and repair of large bone defects remains a clinical challenge worldwide. Inspired by the natural extracellular matrix of bone tissue, organic-inorganic composite scaffolds with three-dimensional (3D) porous structures, sufficient mechanical properties, excellent cytocompatibility, osteoconductivity, and osteogenic potential have received considerable attention within the field of bone engineering. In this work, a novel epichlorohydrin (ECH)-crosslinked hydroxyethyl cellulose (HEC)/soy protein isolate (SPI) porous bi-component scaffold (EHSS) with hydroxyapatite (HAp) functionalization (EHSS/HAp) was constructed for bone defect repair via the combination of lyophilization and in situ biomimetic mineralization. Systematic characterization experiments were performed to assess the morphology, HAp-forming properties, mechanical properties and degradation rate of the scaffold. The results indicated that the prepared scaffolds exhibited an interconnected porous structure, a biomimetic HAp coating on their surfaces, improved mechanical properties in compression and a controllable degradation rate. In particular, semiquantitative analysis showed that the calcium/phosphorus (Ca/P) ratio of EHSS/HAp with 70% SPI content (1.65) was similar to that of natural bone tissue (1.67) according to energy dispersive X-ray spectroscopy analysis. In vitro cell culture experiments indicated that the EHSS/HAp with 70% SPI content showed improved cytocompatibility and was suitable for MC3T3-E1 cell attachment, proliferation and growth. Consistently, in vitro osteogenic differentiation studies showed that EHSS/HAp with 70% SPI content can significantly accelerate the expression of osteogenesis-related genes (Col-1, Runx2, OPN, and OCN) during osteogenic differentiation of MC3T3-E1 cells. Furthermore, when applied to the repair of critical-sized cranial defects in a rat model, EHSS/HAp with 70% SPI was capable of significantly promoting tissue regeneration and integration with native bone tissue. Microscopic computed tomography (micro-CT) results demonstrated that the bone defect site was nearly occupied with newly formed bone at 12 weeks after implantation of EHSS/HAp with 70% SPI content into the defect. Hematoxylin and eosin (H&E) staining and Masson's trichrome staining of histological sections further confirmed that EHSS/HAp with 70% SPI markedly promoted new bone formation and maturation. Collectively, our results demonstrate the potential of EHSS/HAp scaffolds with 70% SPI for successful bone defect repair and regeneration.

Strontium-substituted hydroxyapatite grown on graphene oxide nanosheet-reinforced chitosan scaffold to promote bone regeneration

The strontium-substituted hydroxyapatite (SrHA) is a commonly used material in bone regeneration for its good osteoconductivity and high alkaline phosphatase (ALP) activity. Scaffolds used in bone defects require a high compressive modulus. However, the SrHA nanoparticle-doped scaffold cannot properly fit the required mechanical properties. Therefore, a lot of effort has been used to fabricate synthetic bone scaffolds with biocompatibility, suitable mechanical properties, antibacterial ability and osteoconductivity. Here, we used a facile hydrothermal method to synthesize graphene oxide (GO)-reinforced SrHA nanoparticles. The incorporation of GO can be used as nucleation and growth active sites of hydroxyapatite. In addition, GO is easy to self-assemble into a layered structure in the dispersion, which can effectively regulate the deposition of hydroxyapatite on the surface of GO. The scaffold was fabricated using a freeze-drying method by incorporating SrHA/GO nanoparticles into chitosan (CS) and quaternized chitosan (QCS) mixed solutions. The compressive modulus of the CS/QCS/SrHA/GO scaffold reached 438.5 kPa, which was 4-fold higher than that of the CS/QCS scaffold. The CS/QCS/SrHA/GO scaffold exhibited significantly higher in vitro mineralization levels and ALP activity. In vivo rat skull repair indicated that the CS/QCS/SrHA/GO scaffold had a significant role in promoting bone regeneration. This study provides a new strategy for modifying hydroxyapatite to satisfy the biomedical demand of bone tissue engineering scaffolds.

Intensified Stiffness and Photodynamic Provocation in a Collagen-Based Composite Hydrogel Drive Chondrogenesis

Directed differentiation of bone-marrow-derived stem cells (BMSCs) toward chondrogenesis has served as a predominant method for cartilage repair but suffers from poor oriented differentiation tendency and low differentiation efficiency. To overcome these two obstacles, an injectable composite hydrogel that consists of collagen hydrogels serving as the scaffold support to accommodate BMSCs and cadmium selenide (CdSe) quantum dots (QDs) is constructed. The introduction of CdSe QDs considerably strengthens the stiffness of the collagen hydrogels via mutual crosslinking using a natural crosslinker (i.e., genipin), which simultaneously triggers photodynamic provocation (PDP) to produce reactive oxygen species (ROS). Experimental results demonstrate that the intensified stiffness and augmented ROS production can synergistically promote the proliferation of BMSCs, induce cartilage-specific gene expression and increase secretion of glycosaminoglycan. As a result, this approach can facilitate the directed differentiation of BMSCs toward chondrogenesis and accelerate cartilage regeneration in cartilage defect repair, which routes through activation of the TGF-β/SMAD and mTOR signaling pathways, respectively. Thus, this synergistic strategy based on increased stiffness and PDP-mediated ROS production provides a general and instructive approach for developing alternative materials applicable for cartilage repair.

Gelatin methacryloyl (GelMA)-based biomaterials for bone regeneration

Gelatin methacryloyl (GelMA)-based biomaterials have been widely used in various biomedical applications due to their suitable biological properties and tuneable physical characteristics. In particular, GelMA can be used as a versatile matrix for bone tissue engineering scaffolds via various strategies to overcome major obstacles such as insufficient mechanical property and uncontrollable degradation. This review presents the research status of GelMA, its structure and function, GelMA-based biomaterials and the development of methods along with their existing challenges.

Sustained Release SDF-1α/TGF-β1-Loaded Silk Fibroin-Porous Gelatin Scaffold Promotes Cartilage Repair

Continuous delivery of growth factors to the injury site is crucial to creating a favorable microenvironment for cartilage injury repair. In the present study, we fabricated a novel sustained-release scaffold, stromal-derived factor-1α (SDF-1α)/transforming growth factor-β1 (TGF-β1)-loaded silk fibroin-porous gelatin scaffold (GSTS). GSTS persistently releases SDF-1α and TGF-β1, which enhance cartilage repair by facilitating cell homing and chondrogenic differentiation. Scanning electron microscopy showed that GSTS is a porous microstructure and the protein release assay demonstrated the sustainable release of SDF-1α and TGF-β1 from GSTS. Bone marrow-derived mesenchymal stem cells (MSCs) maintain high in vitro cell activity and excellent cell distribution and phenotype after seeding into GSTS. Furthermore, MSCs acquired enhanced chondrogenic differentiation capability in the TGF-β1-loaded scaffolds (GSTS or GST: loading TGF-β1 only) and the conditioned medium from SDF-1α-loaded scaffolds (GSTS or GSS: loading SDF-1α only) effectively promoted MSCs migration. GSTS was transplanted into the osteochondral defects in the knee joint of rats, and it could promote cartilage regeneration and repair the cartilage defects at 12 weeks after transplantation. Our study shows that GSTS can facilitate in vitro MSCs homing, migration, chondrogenic differentiation and SDF-1α and TGF-β1 have a synergistic effect on the promotion of in vivo cartilage forming. This SDF-1α and TGF-β1 releasing GSTS have promising therapeutic potential in cartilage repair.

Recent advances in functional nanostructured materials for bone-related diseases

Bone-related diseases seriously threaten people's health and research studies have been dedicated towards searching for new and effective treatment methods. Nanotechnologies have opened up a new field in recent decades and nanostructured materials, which exist in a variety of forms, are considered to be promising materials in this field. This article reviews the most recent progress in the development of nanostructured materials for bone-related diseases, including osteoporosis, osteoarthritis, bone metastasis, osteomyelitis, myeloma, and bone defects. We highlight the advantages and functions of nanostructured materials, including sustained release, bone targeting, scaffolding in bone tissue engineering, etc., in bone-related diseases. We also include the remaining challenges of these emerging materials.

Dual-functional 3D-printed composite scaffold for inhibiting bacterial infection and promoting bone regeneration in infected bone defect models

Infection is one of the pivotal causes of nonunion in large bone defect after trauma or tumor resection. Three-dimensional (3D) composite scaffold with multifunctional-therapeutic properties offer many advantages over allogenic or xenogenic bone grafting for the restoration of challenging infected bone defects. In the previous study, we demonstrated that quaternized chitosan (HACC)-grafted polylactide-co-glycolide (PLGA)/hydroxyapatite (HA) scaffold (PLGA/HA/HACC) via 3D-printing technique exhibited significantly improved antimicrobial and osteoconductive property in vitro, together with good biocompatibility in vivo. Hence, the present study further investigated whether such an innovative bone substitute could effectively inhibit the bacterial biofilm formation and promote bone regeneration in vivo. To evaluate the bone repairing effects of the 3D-printed scaffolds on infected cortical and cancellous bone defects scenarios, eighty female Sprague Dawley rats and thirty-six female New Zealand white rabbits were used to establish infected femoral shaft defect and condyle defect model, respectively. X-ray, micro-CT, microbiological and histopathological analyses were used to assess the anti-infection and bone repairing potential of the dual-functional porous scaffolds. We observed that HACC-grafted PLGA/HA scaffolds exhibited significantly enhanced anti-infection and bone regeneration capability in different infected bone defect models. In addition, the degradation rate of the scaffolds appeared to be closely related to the progress of infection, influencing the bone repairing potential of the scaffolds in infected bone defects models. In general, this investigation is of great significance as it demonstrates promising applications of the 3D-printed dual-functional PLGA/HA/HACC scaffold for repairing different types of bone defect under infection.

STATEMENT OF SIGNIFICANCE

Currently, it is clinically urgent to exploit bone substitutes with potential of bacterial inhibition and bone regeneration. However, bone scaffolds with relatively low risks of bacterial resistance and tissue toxicity used for combating infected bone defects remain to be developed. We have reported that quaternized chitosan (HACC)-grafted 3D-printed PLGA/HA composite scaffold had enhanced in vitro antimicrobial and osteoconductive property, and well cytocompatibility in our published study. This continuing study further confirmed that HACC-grafted PLGA/HA scaffolds exhibited significantly enhanced anti-infection and bone regeneration efficacy in both cortical bone defect in rat and cancellous bone defect in rabbit under infection. Meanwhile, we also found that the degradation rate of the scaffolds seemed to be closely related to the progress of infection, influencing the bone repairing potential of the scaffolds in infected bone defects models. In conclusion, this study provides significant opportunities to develop a 3D-printed bone scaffold with dual functions used for infected bone defects in future plastic and orthopaedic surgery.