Simple Fabrication Method for Mixed Matrix Membranes with in Situ MOF Growth for Gas Separation

Smart Textile: Electrohydrodynamic Jet Printing of Ionic Liquid-Functionalized Cu3(HHTP)2 Metal-Organic Frameworks for Gas-Sensing Applications

This study presents the development and characterization of a smart textile gas sensor based on the integration of ionic liquid (IL)-functionalized Cu3(HHTP)2 metal-organic frameworks (MOFs), using electrohydrodynamic jet (e-jet) printing. The sensor was designed for the detection of nitric oxide (NO) gas, a critical target in various environmental and safety applications. Cu3(HHTP)2 MOFs were synthesized and subsequently functionalized with 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate (EMIM+ Otf-) ionic liquid to enhance their chemiresistive performance toward NO gas. The functionalized MOF was then e-jet printed onto electrospun polylactic acid (PLA) substrates to fabricate smart textile sensors. The IL-functionalized Cu3(HHTP)2 sensors demonstrated a 582× increase in conductivity compared to previously reported MOF-based sensors. Additionally, IL functionalization enhanced sensor sensitivity, with a response increasing from less than 5% in pristine MOF@PLA sensors to approximately 570% at 100 ppm of NO gas. Performance was systematically evaluated across NO concentrations ranging from 5 to 300 ppm, achieving a theoretical limit of detection of 3.7 ppm. The sensors exhibited partial reversibility and retained functionality over extended periods and under humid conditions. Comprehensive analyses using SEM, EDX, FTIR, and XRD were performed to assess the crystallinity of MOF deposits and elucidate the sensing mechanism. These findings highlight the potential of e-jet printing of IL-functionalized MOFs for the development of advanced, flexible gas sensors with applications in both civilian and military settings and implications for personal protective wearable technologies.

Recent innovations in in situ strategies to prepare metal-organic framework-based mixed matrix membranes

Mixed matrix membranes (MMMs) composed of metal-organic frameworks (MOFs) and polymer matrixes have garnered significant attention due to their potential to overcome the permeability-selectivity trade-off inherent in polymeric membranes. Nevertheless, the application and industrial production of MOF-based MMMs have been hindered by issues such as poor interfacial compatibility and cumbersome fabrication processes. Recently, in situ strategies have emerged as promising approaches for fabricating MOF-based MMMs, offering enhanced interfacial compatibility between MOF fillers and polymers, as well as a simplified construction process. Furthermore, these strategies enable the creation of cross-linked MMMs with significantly improved interfacial compatibility and mechanical properties, which are unattainable through traditional physical mixing methods. This feature article summarizes recent advancements in the in situ preparation of MOF-based MMMs, encompassing in situ MOF growth, in situ polymerization of polymer matrixes, combined in situ methods, and in situ post-treatment. Our contributions to the field of in situ strategies include the innovative design of efficient spray technology and the formation of asymmetric MMMs. These developments pave the way for the realization of high-performance MOF-based MMMs suitable for industrial applications.

How Can the Filler-Polymer Interaction in Mixed Matrix Membranes Be Enhanced?

Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler-polymer interaction to avoid non-selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side-chain modification and post-synthetic modification of filler.

Anti-biofouling membrane coated with polyvinyl alcohol/sodium carboxymethylcellulose/tannic acid hydrogel for efficient dye/salt separation

Biofouling is the most severe challenge for separation membranes. In this study, a metal-organic framework (MOF)-based mixed-matrix membranes (MMMs) with polyvinyl alcohol (PVA)/sodium carboxymethylcellulose (CMC)/tannic acid (TA) hydrogel coating exhibited a comprehensive anti-biofouling property and high efficient for dye/salt separation. For the hydrogel layer, ethanol inhibited the cross-linking of the hydrogen bond between the PVA, CMC and TA, forming a uniform "hydrogel paint" applied to the membrane surface using the coating method. Subsequently, the hydrogen bond was re-established by evaporating the ethanol. The hydrogel coating could form a dense hydrated layer, endowing the membrane with excellent anti-fouling properties, including oil, proteins, and bacteria. For the MOF-based MMMs layer, the skeleton structure of polyvinylidene fluoride anchored the bimetallic MOF crystals to mitigate the phenomenon of "trade-off". The hydrogel-coated MOF-based MMMs showed excellent properties, such as the water permeability was ∼200 Lm-2 h-1, the rejection for Reactive Blue 19 was 100 %, the rejection for NaCl was 10.9 %, and it showed excellent stability for long-term service. Furthermore, the hydrogel-coated MOF-based MMMs presented a significant inhibitory effect on surface bacteria growth. In brief, this paper provided a new insight into preparing hydrogel-coated MOF-based MMMs, which had potential applications in separating dye/salt.

Study of mixed matrix membranes with in situ synthesized zeolite imidazolate frameworks (ZIF-8, ZIF-67) in polyethersulfone polymer for CO2/CH4 separation

Biogas, produced from anaerobic digestion, is a sustainable and renewable energy source. To upgrade biogas to Bio-CNG, CO2 must be removed from the raw mixture. Membrane separation is an economical process for the removal of CO2, and mixed matrix membranes (MMMs) are being explored for CO2/CH4 separation. MMMs are fabricated using techniques such as in situ techniques to overcome research gaps, such as in filler agglomeration and filler-polymer interfaces. In this work, MMMs were fabricated using the in situ growth of ZIF-8 and ZIF-67 in polyethersulfone (PES) and compared with traditional filler dispersion of ZIF-8 and ZIF-67. The fabricated MMMs were characterized and tested for gas permeation using a model biogas. Fourier-transform infrared (FTIR) spectroscopy and Field Emission Scanning Electron Microscopy (FESEM) analysis were conducted to confirm in situ synthesis of ZIF-8 and ZIF-67. CO2 permeability of in situ ZIF-8 and ZIF-67-based MMMs have enhanced to 84.5 Barrer and 78.8 Barrer, respectively, compared to pure PES membrane, which is around 25 Barrer. Similarly, ZIF-8 and ZIF-67-based traditional MMMs have shown an increase in the CO2 permeability of 75.6 Barrer and 68 Barrer, respectively. Additionally, the selectivity for CO2/CH4 separation increased for some of the prepared MMMs, demonstrating the effectiveness of the in situ fabrication method.

Thermally Annealed High-Aspect-Ratio ZIF-8 Nanoplates-Incorporated Mixed Matrix Membranes for Improved H2/CO2 Selectivity

The main challenge in the preparation of MOF-based mixed matrix membranes is to construct a good interface morphology to improve the gas separation performance and stability of the membranes. Herein, high-aspect-ratio ZIF-8 nanoplates for H2/CO2 separation membranes were synthesized by direct template conversion. The ZIF-8 nanoplates were prepared with the commercial Matrimid polymer to form MMMs by the flat scraping method. The homogeneous dispersion of high-aspect-ratio nanoplates in the membrane and the good compatibility between the filler and the matrix caused by the thermal annealing operation improve the gas separation performance and mechanical properties of MMMs. The H2/CO2 selectivity of MMMs loaded with 30 wt % ZIF-8 nanoplates increased to 10.3, and the H2 permeability was 330.1 Barrer. This synthesis method can be extended to prepare various ZIF nanoplates with elevated aspect ratios to obtain excellent performance fillers for gas separation of MMMs. In addition, the thermal annealing operation allows more efficient gas separation in polymer membranes and is a feasible way to design excellent and stable MMMs.

Challenges and recent advances in MOF-based gas separation membranes

Membrane-based gas separation, characterized by a small footprint, low energy consumption and no pollution, has gained widespread attention as an environmentally friendly alternative to traditional gas separation. Metal-organic-frameworks (MOFs) are considered to be one of the most promising membrane-based gas separation materials because of their large specific surface area and high porosity. One of the hottest studies at the moment is how to utilize the characteristics of MOFs to prepare higher performance gas separation membranes. This paper provides a review of gas separation membranes used in recent years. Firstly, the synthesis methods of MOFs and MOF membranes are briefly introduced. Then, methods to improve the membrane properties of MOFs are described in detail, and include applications of lamellar MOFs, ionic liquid (IL) spin coating, functionalization of MOFs, defect engineering and mixed fillers. In addition, the challenges of MOF-based gas separation membranes are presented, including pore size, environmental disturbances, plasticization, interfacial compatibility, and so on. Finally, based on the current development status of the MOF membranes, the development prospects of MOF gas separation membranes are discussed. It is hoped to provide reliable and complete ideas for researchers to prepare high-performance gas separation membranes in the future.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

New generation mixed matrix membrane for CO2 separation: Transition from binary to quaternary mixed matrix membrane

Contemporary advances in material development associated with membrane gas separation refer to the cost-effective fabrication of high-performance, defect-free mixed matrix membranes (MMMs). For clean energy production, natural gas purification, and CO2 capture from flue gas systems, constituting a functional integration of polymer matrix and inorganic filler materials find huge applications. The broad domain of research and development of MMMs focused on the selection of appropriate materials, inexpensive membrane fabrication, and comparative study with other gas separation membranes for real-world applications. This study addressed a comprehensive review of the advanced MMMs wrapping various facets of membrane material selection; polymer and filler particle morphology and compatibility between the phases and the relevance of several fillers in the assembly of MMMs are analyzed. Further, the research on binary MMMs, their problems, and solutions to overcome these challenges have also been discussed. Finally, the future directions and scope of work on quaternary MMM are scrutinized in the article.

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

Durable and recyclable MOF@polycaprolactone mixed-matrix membranes with hierarchical porosity for wastewater treatment

With the fast-growing global water crisis, the development of novel technologies for water remediation and reuse is crucial. Industrial wastewater especially contains various toxic pollutants that pose an additional threat to the environment; thus, efficient removal of such contaminants can ensure safe reprocessing of industrial wastewater, thereby alleviating the demand for fresh water. Herein, we describe a novel and efficient approach for preparing porous polycaprolactone (PCL) membranes with a hierarchical architecture via a simple solvent/non-solvent methodology. A mixed-matrix membrane (MMM) was further constructed utilizing an amine-functionalized metal-organic framework as the sorbent filler nanoparticles and PCL as the polymer support matrix (MOF@PCL) for wastewater treatment applications. The MOF@PCL MMM demonstrated homogeneous morphology as well as exceptional performance towards the removal of both cationic (methylene blue, MB) and anionic (methyl orange, MO) organic dyes, where the maximum adsorption capacities reached 309 mg g-1 and 208 mg g-1, respectively. Kinetic and thermodynamic investigations revealed that the adsorption process was endothermic with a fast intraparticle diffusion rate constant. The MOF@PCL MMM also displayed excellent mechanical stability and recyclability, where the removal efficiency was maintained after 10 cycles.

A roadmap to enhance gas permselectivity in metal-organic framework-based mixed-matrix membranes

Performing gas separation at high efficiency with minimum energy input and reduced carbon footprint is a major challenge. While several separation methods exist at various technology readiness levels, porous membrane-based separation is considered as a disruptive technology. To attain sustainability and required efficiency, different approaches of membrane design have been explored. However, the selectivity-permeation trade-off and membrane aging have restricted further advancement. In this regard, a new generation composite made of organic polymers and metal-organic framework (MOF) fillers shows substantial promise. Organic polymer matrix allows easy processibility, but it has poor permselectivity for gas molecules. Metal-organic frameworks are excellent sieving materials; however, they suffer from poor processibility issues. A combination of these two components makes an ideal sieving membrane, which can potentially outnumber the existing energy intensive distillation strategies. In this perspective, we have discussed key indices that regulate gas permselectivity by a careful selection of the existing literature. While the target gas flux and selectivity values have been a part of many previous reviews and articles, we have presented a concise discussion on the interface design of the MOF-polymer membrane, morphology, and orientation control of MOF fillers in the matrix. Following this, a future roadmap to overcome challenges related to MOF-polymer interfacial defects is outlined.

Direct Synthesis of Metal-Organic Framework Sols: Advances and Perspectives

The intrinsic lack of processability in the conventional nano/microcrystalline powder form of metal-organic frameworks (MOFs) greatly limits their application in various fields. Synthesis of MOFs with certain flowability make them promising for multitudinous applications. The direct synthesis strategy represents one of the simplest and efficient method for synthesizing solution processable MOF sols/suspensions, compared with other approaches, for instance, the post-synthesis surface modification, the direct dispersion of MOFs in hindered ionic liquids, as well as the calcination method toward a few MOFs with melting behavior. This article reviews the recent direct synthesis strategies of solution processable MOF sols and their typical applications in different fields. The direct synthesis strategies of MOF sols can be classified into two categories: particle size reduction strategy, and selective coordination strategy. The synthesis mechanism of different strategies and the factors affecting the formation of sols are summarized. The application of solution processable MOF sols in different fields are introduced, showing great application potentials. Furthermore, the challenges faced by the direct synthesis of MOF sols and the main methods to deal with the challenges are emphasized, and the future development trend is prospected.

Ionic Liquids Facilitate the Dispersion of Branched Polyethylenimine Grafted ZIF-8 for Reinforced Epoxy Composites

Metal-organic frameworks (MOFs) have been previously shown as an emerging modified class of epoxy resin. In this work, we report a simple strategy for preventing zeolitic imidazolate framework (ZIF-8) nanoparticles from agglomerating in epoxy resin (EP). Branched polyethylenimine grafted ZIF-8 in ionic liquid (BPEI-ZIF-8) nanofluid with good dispersion was prepared successfully using an ionic liquid as both the dispersant and curing agent. Results indicated that the thermogravimetric curve of the composite material had no noticeable change with increasing BPEI-ZIF-8/IL content. The glass transition temperature (T_g) of the epoxy composite was reduced with the addition of BPEI-ZIF-8/IL. The addition of 2 wt% BPEI-ZIF-8/IL into EP effectively improved the flexural strength to about 21.7%, and the inclusion of 0.5 wt% of BPEI-ZIF-8/IL EP composites increased the impact strength by about 83% compared to pure EP. The effect of adding BPEI-ZIF-8/IL on the T_g of epoxy resin was explored, and its toughening mechanism was analyzed in combination with SEM images showing fractures in the EP composites. Moreover, the damping and dielectric properties of the composites were improved by adding BPEI-ZIF-8/IL.

Fabrication of efficient protein imprinted materials based on pearl necklace-like MOFs bacterial cellulose composites

The acquisition of efficient protein isolation substances is vital for proteomic research, whereas it's still challenging nowadays. Herein, an elaborately designed protein imprinted material based on a bacterial cellulose@ZIF-67 composite carrier (BC@ZIF-67) is proposed for the first time. In particular, due to the ultrafine fiber diameter and abundant hydroxyl functional groups of the bacterial cellulose, BC@ZIF-67 presented a compact arrangement structure similar to a pearl necklace, which greatly promoted template immobilization and mass transfer resistance in protein imprinting technology. Therefore, the protein-imprinted material (BC@ZIF-67@MIPs) fabricated by surface imprinting technology and template immobilization strategy could exhibit ultrahigh adsorption capacity (1017.0 mg g^-1), excellent recognition (IF = 5.98) and rapid adsorption equilibrium time (50 min). In addition, based on the experiment outcomes, our team employed BC@ZIF-67@MIPs to enrich template protein in blended protein solutions and biosamples, identifying them as underlying candidates for isolating and purifying proteins.

Cross-Linked Polyimide/ZIF-8 Mixed-Matrix Membranes by In Situ Formation of ZIF-8: Effect of Cross-Linking on Their Propylene/Propane Separation

Despite their potential for the scalable production of mixed-matrix membranes (MMMs), the MMMs prepared by the polymer-modification-enabled in situ metal-organic framework formation (PMMOF) process showed a considerable reduction in gas permeability as the filler loading increased. It was hypothesized that a correlation existed between the decrease in permeability and the change in the properties of the polymer, such as free volume and chain flexibility, upon in situ MOF formation. Herein, we aim to address the permeability reduction by using a cross-linked polyimide (6FDA-DAM:DABA (3:2)). It was found the degree of cross-linking affected not only the properties of the polymer, but also the in situ formation of the ZIF-8 filler particles in the cross-linked polymer. The proper degree of cross-linking resulted in suppressing C₃H₆ permeability reduction, suggesting a possible strategy to overcome the issue of PMMOF. The swelling of the polymer followed by chain rearrangement during the PMMOF, as well as the structural rigidity of the polymer, were found to be critical in mitigating permeability reduction.

Advances in metal-organic framework-based membranes

Membrane-based separations have garnered considerable attention owing to their high energy efficiency, low capital cost, small carbon footprint, and continuous operation mode. As a class of highly porous crystalline materials with well-defined pore systems and rich chemical functionalities, metal-organic frameworks (MOFs) have demonstrated great potential as promising membrane materials over the past few years. Different types of MOF-based membranes, including polycrystalline membranes, mixed matrix membranes (MMMs), and nanosheet-based membranes, have been developed for diversified applications with remarkable separation performances. In this comprehensive review, we first discuss the general classification of membranes and outline the historical development of MOF-based membranes. Subsequently, particular attention is devoted to design strategies for MOF-based membranes, along with detailed discussions on the latest advances on these membranes for various gas and liquid separation processes. Finally, challenges and future opportunities for the industrial implementation of these membranes are identified and outlined with the intent of providing insightful guidance on the design and fabrication of high-performance membranes in the future.

In Situ Growth of Crystalline and Polymer-Incorporated Amorphous ZIFs in Polybenzimidazole Achieving Hierarchical Nanostructures for Carbon Capture

Mixed matrix materials (MMMs) hold great potential for membrane gas separations by merging nanofillers with unique nanostructures and polymers with excellent processability. In situ growth of the nanofillers is adapted to mitigate interfacial incompatibility to avoid the selectivity loss. Surprisingly, functional polymers have not been exploited to co-grow the nanofillers for membrane applications. Herein, in situ synergistic growth of crystalline zeolite imidazole framework-8 (ZIF-8) in polybenzimidazole (PBI), creating highly porous structures with high gas permeability, is demonstrated. More importantly, PBI contains benzimidazole groups (similar to the precursor for ZIF-8, i.e., 2-methylimidazole) and induces the formation of amorphous ZIFs, enhancing interfacial compatibility and creating highly size-discriminating bottlenecks. For instance, the formation of 15 mass% ZIF-8 in PBI improves H₂ permeability and H₂ /CO₂ selectivity by ≈100% at 35 °C, breaking the permeability/selectivity tradeoff. This work unveils a new platform of MMMs comprising functional polymer-incorporated amorphous ZIFs with hierarchical nanostructures for various applications.

Metal-Organic Frameworks (MOFs)-Based Mixed Matrix Membranes (MMMs) for Gas Separation: A Review on Advanced Materials in Harsh Environmental Applications

The booming of global environmental awareness has driven the scientific community to search for alternative sustainable approaches. This is accentuated in the 13th sustainable development goal (SDG13), climate action, where urgent efforts are salient in combating the drastic effects of climate change. Membrane separation is one of the indispensable gas purification technologies that effectively reduces the carbon footprint and is energy-efficient for large-scale integration. Metal-organic frameworks (MOFs) are recognized as promising fillers embedded in mixed matrix membranes (MMMs) to enhance gas separation performance. Tremendous research studies on MOFs-based MMMs have been conducted. Herein, this review offers a critical summary of the MOFs-based MMMs developed in the past 3 years. The basic models to estimate gas transport, preparation methods, and challenges in developing MMMs are discussed. Subsequently, the application and separation performance of a variety of MOFs-based MMMs including those of advanced MOFs materials are summarized. To accommodate industrial needs and resolve commercialization hurdles, the latest exploration of MOF materials for a harsh operating condition is emphasized. Along with the contemplation on the outlook, future perspective, and opportunities of MMMs, it is anticipated that this review will serve as a stepping stone for the coming MMMs research on sustainable and benign environmental application.

Metal-Organic Frameworks for Bioimaging: Strategies and Challenges

Metal-organic frameworks (MOFs), composited with metal ions and organic linkers, have become promising candidates in the biomedical field own to their unique properties, such as high surface area, pore-volume, tunable pore size, and versatile functionalities. In this review, we introduce and summarize the synthesis and characterization methods of MOFs, and their bioimaging applications, including optical bioimaging, magnetic resonance imaging (MRI), computed tomography (CT), and multi-mode. Furthermore, their bioimaging strategies, remaining challenges and future directions are discussed and proposed. This review provides valuable references for the designing of molecular bioimaging probes based on MOFs.

Light-responsive metal-organic framework sheets constructed smart membranes with tunable transport channels for efficient gas separation

Exploring a new type of smart membrane with tunable separation performance is a promising area of research. In this study, new light-responsive metal-organic framework [Co(azpy)] sheets were prepared by a facile microwave method for the first time, and were then incorporated into a polymer matrix to fabricate smart mixed matrix membranes (MMMs) applied for flue gas desulfurization and decarburization. The smart MMMs exhibited significantly elevated SO2(CO2)/N2 selectivity by 184(166)% in comparison with an unfilled polymer membrane. The light-responsive characteristic of the smart MMMs was investigated, and the permeability and selectivity of the Co(azpy) sheets-loaded smart MMMs were able to respond to external light stimuli. In particular, the selectivity of the smart MMM at the Co(azpy) content of 20% for the SO2/N2 system could be switched between 341 and 211 in situ irradiated with Vis and UV light, while the SO2 permeability switched between 58 Barrer and 36 Barrer, respectively. This switching influence was mainly ascribed to the increased SO2 adsorption capacity in the visible light condition, as verified by adsorption test. The CO2 permeability and CO2/N2 selectivity of MMMs in the humidified state could achieve 248 Barrer and 103.2, surpassing the Robeson's upper bound reported in 2019.

Progress in Multifunctional Metal-Organic Frameworks/Polymer Hybrid Membranes

The fabrication of state-of-the-art membranes with customized functions and high efficiency is of great significance, but presents challenges. Emerging metal-organic frameworks (MOFs)/polymer hybrid membranes have provided bright promise as an innovative platform to target multifunctional hybrid materials and devices; this is thanks to their unique properties, which come from three components that are collaboratively enforced. This minireview provides a brief overview of recent progress in the construction of such hybrid membranes, and highlights some of their very important applications in separation, conduction, and sensing.

Robust Nanocellulose/Metal-Organic Framework Aerogel Composites: Superior Performance for Static and Continuous Disposal of Chemical Warfare Agent Simulants

Environment-friendly and robust nanocellulose/metal-organic framework aerogel composites were prepared for effective detoxification of chemical warfare agent simulants both in static and dynamic continuous flow systems. For this, we fabricated a durable porous composite of the UiO-66 catalyst and TEMPO-oxidized cellulose nanofibers (TOCN) to examine as a detoxification filter. Even with over 50 wt % UiO-66, the obtained cellulose aerogel composites exhibited high stability without leaking of UiO-66 for 4 weeks under an aqueous state. The cellulose aerogel composite with 54 wt % UiO-66 showed a quite high surface area (483 m² g^-1) despite the presence of TOCN, which caused fast degradation of methyl paraoxon (MPO), a nerve agent simulant, with a 0.7 min half-life in an aqueous solution with N-ethylmorpholine buffer. This aerogel composite was then examined as the detoxification filter in the continuous flow system under a 7.2 mL h^-1 flow rate, which surprisingly decomposed 53.7 g of MPO within 1 h with 1 m² of the effective area.

Current Trends in Metal-Organic and Covalent Organic Framework Membrane Materials

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have been thoroughly investigated with regards to applications in gas separation membranes in the past years. More recently, new preparation methods for MOFs and COFs as particles and thin-film membranes, as well as for mixed-matrix membranes (MMMs) have been developed. We will highlight novel processes and highly functional materials: Zeolitic imidazolate frameworks (ZIFs) can be transformed into glasses and we will give an insight into their use for membranes. In addition, liquids with permanent porosity offer solution processability for the manufacture of extremely potent MMMs. Also, MOF materials influenced by external stimuli give new directions for the enhancement of performance by in situ techniques. Presently, COFs with their large pores are useful in quantum sieving applications, and by exploiting the stacking behavior also molecular sieving COF membranes are possible. Similarly, porous polymers can be constructed using MOF templates, which then find use in gas separation membranes.

Recent Progress in a Membrane-Based Technique for Propylene/Propane Separation

The similar physico-chemical properties of propylene and propane molecules have made the separation process of propylene/propane challenging. Membrane separation techniques show substantial prospects in propylene/propane separation due to their low energy consumption and investment costs, and they have been proposed to replace or to be combined with the conventional cryogenic distillation process. Over the past decade, organosilica membranes have attracted considerable attention due to their significant features, such as their good molecular sieving properties and high hydrothermal stability. In the present review, holistic insight is provided to summarize the recent progress in propylene/propane separation using polymeric, inorganic, and hybrid membranes, and a particular inspection of organosilica membranes is conducted. The importance of the pore subnano-environment of organosilica membranes is highlighted, and future directions and perspectives for propylene/propane separation are also provided.

Epoxy Functional Composites Based on Lanthanide Metal-Organic Frameworks for Luminescent Polymer Materials

The integration of metal-organic frameworks (MOF) into organic polymers represents a direct and effective strategy for developing innovative composite materials that combine the exceptional properties of MOFs with the robustness of organic polymers. However, the preparation of MOF@polymer hybrid composites requires an efficient dispersion and interaction of MOF particles with polymer matrices, which remains a significant challenge. In this work, a new simple and direct approach was applied for the development of Ln-MOF@polymer materials. A series of Ln-MOF@TGIC composites {Ln-MOF = [Ln(μ₃-BTC)(H₂O)₆]_n (Ln-BTC), where Ln = Eu, Tb, Eu_0.05Tb_0.95; H₃BTC = 1,3,5-benzenetricarboxylic acid; TGIC = triglycidyl isocyanurate} were successfully obtained by applying a grinding method via the chemical bonding between uncoordinated carboxylate groups in Ln-BTC and epoxy groups in TGIC. The Ln-BTC@TGIC materials possess significant fluorescence characteristics with superior emission lifetimes and quantum yields if compared to parent Ln-MOFs. Interestingly, under the UV irradiation, a considerable color change from yellow in Eu_0.05Tb_0.95-BTC to red in Eu_0.05Tb_0.95-BTC@TGIC was observed. The energy-transfer mechanism was also rationalized by the density functional theory (DFT) calculations. The developed Ln-BTC@TGIC composites were further applied as functional fluorescent coatings for the fabrication, via a simple spraying method, of the flexible polyimide (PI) films, Ln-BTC@TGIC@PI. Thus, the present work unveils a new methodology and expands its applicability for the design and assembly of stable, multicomponent, and soft polymer materials with remarkable fluorescence properties.

Metal Organic Framework - Based Mixed Matrix Membranes for Carbon Dioxide Separation: Recent Advances and Future Directions

Gas separation and purification using polymeric membranes is a promising technology that constitutes an energy-efficient and eco-friendly process for large scale integration. However, pristine polymeric membranes typically suffer from the trade-off between permeability and selectivity represented by the Robeson's upper bound. Mixed matrix membranes (MMMs) synthesized by the addition of porous nano-fillers into polymer matrices, can enable a simultaneous increase in selectivity and permeability. Among the various porous fillers, metal-organic frameworks (MOFs) are recognized in recent days as a promising filler material for the fabrication of MMMs. In this article, we review representative examples of MMMs prepared by dispersion of MOFs into polymer matrices or by deposition on the surface of polymeric membranes. Addition of MOFs into other continuous phases, such as ionic liquids, are also included. CO2 separation from hydrocarbons, H2, N2, and the like is emphasized. Hybrid fillers based on composites of MOFs with other nanomaterials, e.g., of MOF/GO, MOF/CNTs, and functionalized MOFs, are also presented and discussed. Synergetic effects and the result of interactions between filler/matrix and filler/filler are reviewed, and the impact of filler and matrix types and compositions, filler loading, surface area, porosity, pore sizes, and surface functionalities on tuning permeability are discoursed. Finally, selectivity, thermal, chemical, and mechanical stability of the resulting MMMs are analyzed. The review concludes with a perspective of up-scaling of such systems for CO2 separation, including an overview of the most promising MMM systems.

Surface Modifications of Nanofillers for Carbon Dioxide Separation Nanocomposite Membrane

CO2 separation is an important process for a wide spectrum of industries including petrochemical, refinery and coal-fired power plant industries. The membrane-based process is a promising operation for CO2 separation owing to its fundamental engineering and economic benefits over the conventionally used separation processes. Asymmetric polymer–inorganic nanocomposite membranes are endowed with interesting properties for gas separation processes. The presence of nanosized inorganic nanofiller has offered unprecedented opportunities to address the issues of conventionally used polymeric membranes. Surface modification of nanofillers has become an important strategy to address the shortcomings of nanocomposite membranes in terms of nanofiller agglomeration and poor dispersion and polymer–nanofiller incompatibility. In the context of CO2 gas separation, surface modification of nanofiller is also accomplished to render additional CO2 sorption capacity and facilitated transport properties. This article focuses on the current strategies employed for the surface modification of nanofillers used in the development of CO2 separation nanocomposite membranes. A review based on the recent progresses made in physical and chemical modifications of nanofiller using various techniques and modifying agents is presented. The effectiveness of each strategy and the correlation between the surface modified nanofiller and the CO2 separation performance of the resultant nanocomposite membranes are thoroughly discussed.

Controllable Synthesis of Metal-Organic Framework/Polyethersulfone Composites

Composite materials that contain metal-organic frameworks (MOFs) as a filler and a polymer matrix have attracted attention because they present a combination of high porosity and structural integrity. Phase compatibilities of the MOF and polymer play a vital role in the formation of the composites. In particular, the stiff polymer cannot easily adapt to penetrate into the surface pore of MOF and mainly depends on chemical attractions to form the MOF/polymer composites. We report the synthesis of MOF/polyethersulfone (Young’s modulus = ~2.6 GPa) via different fabrication methods, different MOF types and particle sizes, and different solvents. The formed network structures are robust, monolithic composites with 60% MOF loadings; also, the MOF surface area and porosity were fully preserved. The study explored the formation of the composite between MOF and a stiff polymer and encourages the design of more MOF/polymer composite materials across a wide range of applications.

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures

Metal-organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. This review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.

Interfacial engineering of a polymer-MOF composite by in situ vitrification

Non-stoichoimetric crystalline ZIF-62 was used as the filler for a 6FDA-DAM polyimide-based composite membrane. In situ melting and vitrification of ZIF-62 was then performed, to yield the ZIF-62 glass phase (agZIF-62), within the polymer matrix. Focus ion beam scanning electron microscopy (FIB-SEM), thermal characterisation and membrane separation tests demonstrate the filling of voids at the MOF/polymer interface from the liquid phase of ZIF-62.

Polymer-Based Shaping Strategy for Zeolite Templated Carbons (ZTC) and Their Metal Organic Framework (MOF) Composites for Improved Hydrogen Storage Properties

Porous materials such as metal organic frameworks (MOFs), zeolite templated carbons (ZTC), and some porous polymers have endeared the research community for their attractiveness for hydrogen (H₂) storage applications. This is due to their remarkable properties, which among others include high surface areas, high porosity, tunability, high thermal, and chemical stability. However, despite their extraordinary properties, their lack of processability due to their inherent powdery nature presents a constraining factor for their full potential for applications in hydrogen storage systems. Additionally, the poor thermal conductivity in some of these materials also contributes to the limitations for their use in this type of application. Therefore, there is a need to develop strategies for producing functional porous composites that are easy-to-handle and with enhanced heat transfer properties while still retaining their high hydrogen adsorption capacities. Herein, we present a simple shaping approach for ZTCs and their MOFs composite using a polymer of intrinsic microporosity (PIM-1). The intrinsic characteristics of the individual porous materials are transferred to the resulting composites leading to improved processability without adversely altering their porous nature. The surface area and hydrogen uptake capacity for the obtained shaped composites were found to be within the range of 1,054–2,433 m²g⁻¹ and 1.22–1.87 H₂ wt. %, respectively at 1 bar and 77 K. In summary, the synergistic performance of the obtained materials is comparative to their powder counterparts with additional complementing properties.

Modulator-Mediated Functionalization of MOF-808 as a Platform Tool to Create High-Performance Mixed-Matrix Membranes

Modulator-mediated functionalization (MoFu) is introduced as a new and versatile platform tool to improve the separation performance of metal-organic framework (MOF)-based membranes, exemplified here by the creation of mixed-matrix membranes (MMMs) with enhanced CO₂ separation efficiency. The unique structure of MOF-808 allows incorporation of CO₂-philic modulators in the MOF framework during a one-pot synthesis procedure in water, thus creating a straightforward way to functionalize both MOF and corresponding MMM. As a proof of concept, a series of fluorinated carboxylic acids [trifluoroacetic acid (TFA), pentafluoropropionic acid (PFPA), and heptafluorobutyric acid (HFBA)] and nonfluorinated alkyl carboxylic acids (acetic acid (AA), propionic acid (PA), and butyric acid (BA)) were used as a modulator during MOF-808 synthesis. Two of the best MMMs prepared with 30 wt % MOF-TFA (100% increase in CO₂/CH₄ separation factor, 350% increase in CO₂ permeability) and 10 wt % MOF-PFPA (140% increase in CO₂/CH₄ separation factor, 100% increase in CO₂ permeability) scored very close to or even crossed the 2008 and 2018 upper bound limits for CO₂/CH₄. Because of its facile functionalization (and its subsequent excellent performance), MOF-808 is proposed as an alternative for widely used UiO-66, which is, from a functionalization point-of-view and despite its widespread use, a rather limited MOF.

Metal-organic framework UiO-66 membranes

Metal-organic frameworks (MOFs) have emerged as a class of promising membrane materials. UiO-66 is a prototypical and stable MOF material with a number of analogues. In this article, we review five approaches for fabricating UiO-66 polycrystalline membranes including in situ synthesis, secondary synthesis, biphase synthesis, gas-phase deposition and electrochemical deposition, as well as their applications in gas separation, pervaporation, nanofiltration and ion separation. On this basis, we propose possible methods for scalable synthesis of UiO-66 membranes and their potential separation applications in the future.

High Performance of PIM-1/ZIF-8 Composite Membranes for O2/N2 Separation

This work reports the preparation, characterization, and O₂/N₂ separation properties of composite membranes based on the polymer of intrinsic microporosity (PIM-1) and the zeolitic imidazolate framework (ZIF-8). Especially, the composite membranes were prepared by growing ZIF-8 nanoparticles on one side of the PIM-1 membrane in methanol. Fourier transform infrared spectroscopy and thermo-gravimetric analysis indicated that there is no strong chemical interaction between ZIF-8 nanoparticles and PIM-1 chains. Scanning electron microscopy images showed that ZIF-8 nanoparticles adhere well to the PIM-1 membrane surface. The pure-gas permeation results confirmed that growth of ZIF-8 on the PIM-1 membrane can enhance the performance of O₂/N₂ separation. Particularly, the O₂/N₂ separation performance of the PIM-1/ZIF-8-7 composite membrane exceeds the Robeson upper bound line.