Hybrid Polymer/Metal-Organic Framework Films for Colorimetric Water Sensing over a Wide Concentration Range

Redefining Metal Organic Frameworks in Biosensors: Where Are We Now?

As a broad class of porous nanomaterials, metal organic frameworks (MOFs) exhibit unique properties, such as broad tunability, high stability, atomically well-defined structure, and ordered uniform porosity. These features facilitate the rational design of MOFs as an outstanding nanomaterial candidate in biosensing, therapeutics delivery, and catalysis applications. Recently, novel modifications of the MOF nanoarchitecture and incorporation of synergistic guest materials have been investigated to achieve well-tailored functional design, gradually bridging the fundamental gap between structure and targeted activity. Specifically, the burgeoning studies of MOF-based high-performance biosensors have aimed to achieve high sensitivity, selectivity, and stability for a large variety of analytes in different sensing matrices. In this review, we elaborate the key roles of MOF nanomaterials in biosensors, including their high stability as a protective framework for biomolecules, their intrinsic sensitivity-enhancing functionalities, and their contribution of catalytic activity as a nanozyme. By examining the main structures of MOFs, we further identify varied structural engineering approaches, such as precursor tuning and guest molecule incorporation, that elucidate the concept of the structure-activity relationship of MOFs. Furthermore, we highlight the unique applications of MOF nanomaterials in electrochemical and optical biosensors for enhanced sensor performances. Finally, the challenges and future perspectives of developing next-generation MOF nanomaterials for biosensor applications are discussed.

Amorphous PdRuOx as High-Activity Sensitizers for Ultrafast Low-Humidity Sensors

Amorphous noble metals often display excellent sensitization due to their unsaturated atomic coordination and abundant active sites on the surface. In this work, amorphous palladium-ruthenium bimetallic nanoparticles were successfully prepared by lithium doping and incorporated into MOF-303 by using a confinement strategy. Compared with crystalline c-PdRuOx@MOF-303, the low-humidity sensor constructed with amorphous a-PdRuOx@MOF-303 exhibits higher response values (3600 Hz to 3.39% RH), shorter response/recovery time (9/7 s), low-humidity hysteresis (0.16% RH) and excellent stability. Meanwhile, the a-PdRuOx@MOF-303 sensor has been further explored to achieve continuous monitoring of human breathing, cough, and finger humidity, providing broad application prospects for amorphous materials in wearable medical devices and noncontact human-machine interactions. Additionally, the sensitive mechanism was explored by GCMC methods. The simulation results demonstrate that introducing a-PdRuOx into the pores of MOF-303 leads to significant enhancement in adsorption properties. This improvement is not only due tothe increase of active sites provided by a-PdRuOx but also the substantial rise in adsorption energy for the hydrophilic pocket of MOF-303. The adsorption energy increases from -25.70 to -31.56 kJ/mol, highlighting that the abundant active sites of the a-PdRuOx work in synergy with the hydrophilic pocket of MOF-303. This synergy enables the adsorption and activation of more water molecules, effectively enhancing the overall adsorption capacity and performance of the MOF-303.

Highly Efficient Numerical Method for Modeling Mofs Containing Transition Metal Ions

Employing a group-function based semiempirical approach, a new program packageΣHΘΩ $$ \varSigma H\varTheta \varOmega $$ (seethoo), targeted to modeling of metal-organic frameworks (MOFs) containing transition metal ions (TMIs) with open d-shells is developed. In this proof of concept study it is shown that theΣHΘΩ $$ \varSigma H\varTheta \varOmega $$ package has potential to accurately compute d-shell low-spin (LS) -high-spin (HS) gaps and charge distributions in MOFs inO N 1 . 33 $$ O\left({N}^{1.33}\right) $$ time with reasonable accuracy. The calculations were carried out for a variety of MOFs and MOF-like systems containing doubly and triply charged Mn, Fe, Co and Ni ions. For Fe-containing systems, parameters of57 Fe $$ {}^{57}\mathrm{Fe} $$ Mössbauer spectra were also computed. For the test runs, the results reasonably agree with available experimental data up to errors introduced by use of the CNDO parametrization in the test manner.

Low Power Gas Sensors: From Structure to Application

Gas sensors are pivotal across industries, encompassing environmental monitoring, industrial safety, and healthcare. Recently, a surge in demand for low power gas sensors has emerged, driven by the huge need for applications in portable devices, wireless sensor networks, and the Internet of things (IoT). The practical realization of a densely interconnected sensor network demands gas sensors to have low power consumption for energy-efficient operation. This Perspective offers a comprehensive overview of the progress of low-power sensors for gas and volatile organic compound detection, with a keen focus on the interplay between sensing materials (including metal oxide semiconductors, metal-organic frameworks, and two-dimensional materials), sensor structures, and power consumption. The main gas sensing mechanisms are discussed, and we delve into the mechanisms for achieving low power consumption including material properties and sensor design. Furthermore, typical applications of low power gas sensors are also presented, including wearable technology, food safety, and environmental monitoring. The review will end by discussing some open questions and ongoing needs.

Diphenyl imidazole-based fluorescent chemosensor for Al3+ and its Al3+ complex toward water detection in food products

A sophisticated fluorescent chemosensor, 2-(4-nitrophenyl)-4,5-diphenyl-1H-imidazole (NPDI), was designed and synthesized through a one-step condensation reaction. NPDI exhibited a fluorescence enhancement response toward Al3+, accompanied by significant emission color change without interference from other tested metal ions. The binding stoichiometry and mechanism was corroborated using various techniques. The limit of detection (LOD) for Al3+ could reach 7.25 × 10-8 mol/L and the binding constant was found to be 1.47 × 105 L/mol. Furthermore, the in-situ formed NPDI·Al complex functioned a secondary chemosensor for water by quenching effect. The fluorescence quenching mechanism could be attributed to hydrogen bonding interaction of nitro substituent with water. The LOD was calculated to be 0.012 %, indicating NPDI·Al heightened sensitivity to water. Additionally, NPDI·Al complex was employed for the moisture detection in the surroundings. Finally, the practical application of NPDI·Al complex had been successfully used in the determination of water content in food products.

Humidity Sensors Based on Metal-Organic Frameworks

Humidity sensors are important in industrial fields and human activities. Metal-organic frameworks (MOFs) and their derivatives are a class of promising humidity-sensing materials with the characteristics of a large specific surface area, high porosity, modifiable frameworks, and high stability. The drawbacks of MOFs, such as poor film formation, low electrical conductivity, and limited hydrophilicity, have been gradually overcome with the development of material science. Currently, it is moving towards a critical development stage of MOF-based humidity sensors from usability to ease of use, of which great challenges remain unsolved. In order to better understand the related challenges and point out the direction for the future development of MOF-based humidity sensors, we reviewed the development of such sensors based on related published work, focusing on six primary types (impedance, capacitive, resistive, fluorescent, quartz crystal microbalance (QCM), and others) and analyzed the sensing mechanism, material design, and sensing performance involved, and presented our thoughts on the possible future research directions.

Light-Induced Color Switching of Single Metal-Organic Framework Nanocrystals

Photoinduced modulation of the optical parameters of nanomaterials underlies the operating principles of all-optical nanodevices. Here, we demonstrate the laser-induced 10% modulation of the refractive index and 16-fold modulation of the extinction coefficient of the dynamic metal-organic framework (HKUST-1) nanocrystals within the whole visible range. Using the laser-induced water sorption/desorption process inside HKUST-1, we have achieved size-dependent reversible tuning of brightness and color of its nanocrystals over the different spatial directions and color palette. The numerical analysis also confirmed the detected optical tuning through the evolution of optical spectra and directivity of the scattered light. The results of the work demonstrate the promising nature of the dynamic metal-organic frameworks for nonlinear optics and expand the library of chemically synthesized hybrid materials with light-controlled optical properties.

A photoprogrammable electronic nose with switchable selectivity for VOCs using MOF films

Advanced analytical applications require smart materials and sensor systems that are able to adapt or be configured to specific tasks. Based on reversible photochemistry in nanoporous materials, we present a sensor array with a selectivity that is reversibly controlled by light irradiation. The active material of the sensor array, or electronic nose (e-nose), is based on metal-organic frameworks (MOFs) with photoresponsive fluorinated azobenzene groups that can be optically switched between their trans and cis state. By irradiation with light of different wavelengths, the trans-cis ratio can be modulated. Here we use four trans-cis values as defined states and employ a four-channel quartz-crystal microbalance for gravimetrically monitoring the molecular uptake by the MOF films. We apply the photoprogrammable e-nose to the sensing of different volatile organic compounds (VOCs) and analyze the sensor array data with simple machine-learning algorithms. When the sensor array is in a state with all sensors either in the same trans- or cis-rich state, cross-sensitivity between the analytes occurs and the classification accuracy is not ideal. Remarkably, the VOC molecules between which the sensor array shows cross-sensitivity vary by switching the entire sensor array from trans to cis. By selectively programming the e-nose with light of different colors, each sensor exhibits a different isomer ratio and thus a different VOC affinity, based on the polarity difference between the trans- and cis-azobenzenes. In such photoprogrammed state, the cross-sensitivity is reduced and the selectivity is enhanced, so that the e-nose can perfectly identify the tested VOCs. This work demonstrates for the first time the potential of photoswitchable and thus optically configurable materials as active sensing material in an e-nose for intelligent molecular sensing. The concept is not limited to QCM-based azobenzene-MOF sensors and can also be applied to diverse sensing materials and photoswitches.

Flexible, non-contact and multifunctional humidity sensors based on two-dimensional phytic acid doped co-metal organic frameworks nanosheets

The development of high-performance humidity sensors is of great significance to explore their practical applications in the fields of environment, energy saving and safety monitoring. Herein, a flexible, non-contact and multifunctional humidity sensor based on two-dimensional Co-metal organic frameworks (Co-MOF) nanosheets is proposed, which is fabricated by simple bottom-up synthesis method. Furthermore, environmentally friendly, renewable and abundant biomass phytic acid (PA) is modified on the surface of Co-MOF nanosheets, which releases free protons being capable of etching the framework of MOF to improve the hydrophilicity and conductivity of MOF. Compared with Co-MOF-based sensor, the Co-MOF@PA-based sensor exhibits significantly enhanced sensitivity and broadened response range within 23-95% relative humidity (RH). The humidity sensor has an excellent humidity sensing response over 2 × 10³. The Co-MOF@PA-based sensor shows good flexibility and humidity sensing properties, endowing it with multifunctional applications in real-time facial respiration monitoring, skin humidity perception, cosmetic moisturizing evaluation and fruit freshness testing. Four respiration patterns, including slow breath, deep breath, normal breath and fast breath are wirelessly monitored in real time by Co-MOF@PA-based sensor and recorded by mobile phone software. The research work presents potential applications in human-machine interactions (HMI) devices in future.

N, Cl-doped carbon dots for fluorescence and colorimetric dual-mode detection of water in tetrahydrofuran and development of a paper-based sensor

N, Cl-doped carbon dots (N, Cl-CDs) were prepared by hydrothermal method from rhodamine B (RhB) and ethylenediamine (EDA). The resulting N, Cl-CDs exhibited fascinating solvent dependence and strict excitation independence. As the polarity of the solvent increased (from tetrahydrofuran (THF) to water), the emission spectrum of N, Cl-CDs was redshifted and the fluorescence efficiency decreased, which were attributed to hydrogen bond-induced aggregation. Taking advantage of these attributes, the N, Cl-CDs were used as suitable probes for fluorescence and colorimetric dual-mode detection of water in THF. The linear relationship was 0.5-100% water with the detection limit down to 0.093%. Moreover, the sensing platform was converted into a paper-based sensor for handy, real-time, and visible humidity sensing. N, Cl-CDs/PVA films were fabricated and realized continuously tunable solid-state fluorescence, further expanding their practical application.

Polymethylolacrylamide/AuNPs Nanocomposites: Electrochemical Synthesis and Functional Characteristics

In this study the advantages of the electrochemical approach to the formation of polymer/metal nanoparticle composites are demonstrated. The method enables one to simplify the multistage processes of traditional technologies for the production of such materials through combining all intermediate processes in one stage and reducing the total formation time to 3–10 min. The possibility of a single-stage formation of a polymethylolacrylamide/AuNPs composite through including AuNPs into an electrically non-conducting polymethylolacrylamide film (carrier) formed by electropolymerization through potentiostatic electrolysis is also demonstrated for the first time. It is established that the addition of tetrachloroauric acid (HAuCl₄·4H₂O) into a monomeric composition containing acrylamide, formaldehyde, N,N′-methylene-bis-acrylamide, zinc chloride, and H₂O results in simultaneous electrochemical initiation of polymerization with the formation of a polymer film on the cathode, electrolytic reduction of gold ions to Au⁰, and immobilization of AuNPs particles into the growing polymer matrix. It was found that the formation of the PMAA / AuNPs composite is energetically more favorable than the synthesis of the main PMAA film, since it proceeds at a lower cathodic potential. The inclusion of AuNPs into the polymethylolacrylamide film was confirmed visually, as well as by X-ray phase analysis, small-angle X-ray scattering, microscopy, and element analysis. The gold content in the composite increases along with the increase of the concentration of HAuCl₄ in the electrolyte. The radius of the AuNPs particles was found to range between 3 and 7 nm. The AuNPs particles are spherical in shape and can combine into larger clusters containing up to 10 or more particles. The dynamics of formation, structure, and morphology of the polymethylolacrylamide/AuNPs composite were investigated. It was revealed that gold nanoparticles are mainly concentrated in the near-electrode and near-solution layers of the composite. We found that the composite has electrocatalytic activity. The possibility of its use as a sensor for hydrogen peroxide is demonstrated.

Epoxy Functional Composites Based on Lanthanide Metal-Organic Frameworks for Luminescent Polymer Materials

The integration of metal-organic frameworks (MOF) into organic polymers represents a direct and effective strategy for developing innovative composite materials that combine the exceptional properties of MOFs with the robustness of organic polymers. However, the preparation of MOF@polymer hybrid composites requires an efficient dispersion and interaction of MOF particles with polymer matrices, which remains a significant challenge. In this work, a new simple and direct approach was applied for the development of Ln-MOF@polymer materials. A series of Ln-MOF@TGIC composites {Ln-MOF = [Ln(μ₃-BTC)(H₂O)₆]_n (Ln-BTC), where Ln = Eu, Tb, Eu_0.05Tb_0.95; H₃BTC = 1,3,5-benzenetricarboxylic acid; TGIC = triglycidyl isocyanurate} were successfully obtained by applying a grinding method via the chemical bonding between uncoordinated carboxylate groups in Ln-BTC and epoxy groups in TGIC. The Ln-BTC@TGIC materials possess significant fluorescence characteristics with superior emission lifetimes and quantum yields if compared to parent Ln-MOFs. Interestingly, under the UV irradiation, a considerable color change from yellow in Eu_0.05Tb_0.95-BTC to red in Eu_0.05Tb_0.95-BTC@TGIC was observed. The energy-transfer mechanism was also rationalized by the density functional theory (DFT) calculations. The developed Ln-BTC@TGIC composites were further applied as functional fluorescent coatings for the fabrication, via a simple spraying method, of the flexible polyimide (PI) films, Ln-BTC@TGIC@PI. Thus, the present work unveils a new methodology and expands its applicability for the design and assembly of stable, multicomponent, and soft polymer materials with remarkable fluorescence properties.

Metal–organic frameworks/biopolymer nanocomposites: from fundamentals toward recent applications in modern technology

Bio–nanocomposite compounds based on biopolymers and MOFs have presented great potential in various applications for modern technology.

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

In Situ Spectroscopy of Calcium Fluoride Anchored Metal-Organic Framework Thin Films during Gas Sorption

Surface‐mounted metal–organic frameworks (SURMOFs) show promising behavior for a manifold of applications. As MOF thin films are often unsuitable for conventional characterization techniques, understanding their advantageous properties over their bulk counterparts presents a great analytical challenge. In this work, we demonstrate that MOFs can be grown on calcium fluoride (CaF₂) windows after proper functionalization. As CaF₂ is optically (in the IR and UV/Vis range of the spectrum) transparent, this makes it possible to study SURMOFs using conventional spectroscopic tools typically used during catalysis or gas sorption. Hence, we have measured HKUST‐1 during the adsorption of CO and NO. We show that no copper oxide impurities are observed and also confirm that SURMOFs grown by a layer‐by‐layer (LbL) approach possess Cu⁺ species in paddlewheel confirmation, but 1.9 times less than in bulk HKUST‐1. The developed methodology paves the way for studying the interaction of any adsorbed gases with thin films, not limited to MOFs, low temperatures, or these specific probe molecules, pushing the boundaries of our current understanding of functional porous materials.

Liquid-Phase Quasi-Epitaxial Growth of Highly Stable, Monolithic UiO-66-NH2 MOF thin Films on Solid Substrates

High quality, monolithic UiO-66-NH2 thin films on diverse solid substrates have been prepared via a low temperature liquid phase epitaxy method. The achievement of continuous films with low defect densities and great stability against high temperatures and hot water is proven, clearly outperforming other reported types of MOF thin films.

Advanced Photoresponsive Materials Using the Metal-Organic Framework Approach

When fabricating macroscopic devices exploiting the properties of organic chromophores, the corresponding molecules need to be condensed into a solid material. Since optical absorption properties are often strongly affected by interchromophore interactions, solids with a well-defined structure carry substantial advantages over amorphous materials. Here, the metal-organic framework (MOF)-based approach is presented. By appropriate functionalization, most organic chromophores can be converted to function as linkers, which can coordinate to metal or metal-oxo centers so as to yield stable, crystalline frameworks. Photoexcitations in such chromophore-based MOFs are surveyed, with a special emphasis on light-switchable MOFs from photochromic molecules. The conventional powder form of MOFs obtained using solvothermal approaches carries certain disadvantages for optical applications, such as limited efficiency resulting from absorption and light scattering caused by the (micrometer-sized) powder particles. How these problems can be avoided by using MOF thin films is demonstrated.

Dynamically Tunable Plasmonic Band for Reversible Colorimetric Sensors and Surface-Enhanced Raman Scattering Effect with Good Sensitivity and Stability

A colorimetric sensor based on plasmonic nanoparticles (NPs) is a promising and convenient detection tool, but its reproducibility and adjustability remain a challenge because the NPs are mainly random and uncontrollable. Herein, a colorimetric sensor with good reversibility and reproducibility was prepared by embedding the two-dimensional (2D) Au NP arrays on the surface of the polyacrylamide hydrogel film to form 2D Au NP arrays attached a hydrogel composite. For this composite, with the change of the interspacing distance of Au NPs driven by the swelling-shrinking behavior of the hydrogel carrier, the diffraction peaks faded away and plasmonic coupling peaks appeared, accompanied by a series of obvious color changes (iridescence ↔ violet ↔ golden yellow ↔ red), which can be correlated to the applied water content. Importantly, the composite had good reproducibility as a result of a highly ordered array structure. Additionally, this colorimetric sensor with a dynamically tunable plasmonic band can be used as a high-quality surface-enhanced Raman scattering (SERS) substrate because the gap distance of the Au NPs can be uniformly controlled. We demonstrated that, as the active gap distance decreased, the SERS signals can be significantly intensified. When the water content reached 40%, this SERS substrate exhibited high sensitivity (10^-10 M for 4-aminothiophenol and 10^-9 M for thiram) and good reproducibility (relative standard deviation of <20%) using the excitation laser of 785 nm because of the small gap between two adjacent Au NPs and the highly ordered periodic structure. Such 2D Au NP arrays attached to a hydrogel composite could be a new strategy to obtain a high-quality colorimetric sensor and dynamic SERS substrate.

Controlled dye release from a metal-organic framework: a new luminescent sensor for water

By introducing the dye Rhodamine 6G (R6G) into a metal-organic framework (MOF), Mn-sdc-2 (H₂sdc = 4,4'-stilbenedicarboxylic acid), with a pore size of 20 × 9.8 Ų, the composite R6G@Mn-sdc-2 was obtained. Subsequently, the MOF Mn-sdc-1 with a smaller pore size of 7.5 × 7.5 Ų can be formed through a single-crystal to single-crystal transformation from Mn-sdc-2, thus tightly locking the dye R6G within the pores. Compared with R6G@Mn-sdc-2, R6G@Mn-sdc-1 exhibits a stronger fluorescence emission of R6G. Because the MOF Mn-sdc-1 can reversibly transform back to Mn-sdc-2 in the presence of trace water, the dye R6G can be released. This enables R6G@Mn-sdc-1 to be used as a new luminescent sensor for trace water in organic solvents by monitoring the fluorescence intensity of released R6G. The limit of detection can reach 0.035% in ethanol (v : v), which is among the most sensitive fluorescent water probes.

Functional metal–organic frameworks as effective sensors of gases and volatile compounds

This review summarizes the recent advances of metal organic framework (MOF) based sensing of gases and volatile compounds.

Synthesis of MIL-53 thin films by vapour-assisted conversion

Using a vapour-assisted conversion approach it is possible to prepare homogeneous MIL-53 thin films on a variety of substrates.