Untemplated Resveratrol-Mediated Polydopamine Nanocapsule Formation

Development and pharmacological evaluation of liposomes and nanocapsules containing paroxetine hydrochloride

Depression is one of the most common psychiatric disorders. Nanotechnology has emerged to optimize the pharmacological response. Therefore, the aim of this work was to develop and characterize liposomes and nanocapsules containing paroxetine hydrochloride and evaluate their antidepressant-like effect using the open field and tail suspension tests in mice. Liposomes and nanocapsules were prepared using the reverse-phase evaporation and nanoprecipitation methods, respectively. The particle size of the formulation ranged from 121.81 to 310.73 nm, the polydispersity index from 0.096 to 0.303, the zeta potential from -11.94 to -34.50 mV, the pH from 5.31 to 7.38, the drug content from 80.82 to 94.36 %, and the association efficiency was 98 %. Paroxetine hydrochloride showed slower release when associated with liposomes (43.82 %) compared to nanocapsules (95.59 %) after 10 h. In Vero cells, in vitro toxicity showed a concentration-dependent effect for paroxetine hydrochloride nanostructures. Both nanostructures decreased the immobility time in the TST at 2.5 mg/kg without affecting the number of crossings in the open field test, suggesting the antidepressant-like effect of paroxetine. In addition, the nanocapsules decreased the number of groomings, reinforcing the anxiolytic effect of this drug. These results suggest that the nanostructures were effective in preserving the antidepressant-like effect of paroxetine hydrochloride even at low doses.

Development of biobased multifunctional films incorporated with essential oils@polydopamine nanocapsules for food preservation applications

A novel multifunctional soy protein isolate-carboxymethyl cellulose (SPI-CMC) based nanocomposite film was successfully prepared by introducing the polydopamine encapsulated essential oils (EOs@PDA) nanocapsules for food packaging. The EOs@PDA nanocapsules possessed smooth spherical morphology with good dispersion, and the particle size was about 283 nm. The influence of EOs@PDA nanocapsules on the physical, chemical and biological properties of EOs@PDA/SPI-CMC nanocomposite film was investigated. The EOs@PDA nanocapsules were crosslinked with SPI-CMC matrix and distributed uniformly in the matrix. The nanocomposite film with 1 wt% nanocapsules (EP/S-C) also showed excellent antioxidant activity (66.6 ± 0.3 % on DPPH and 98.6 ± 0.1 % on ABTS), superior UV-blocking properties (100 %), advanced antibacterial ability against E. coli and S. aureus, favorable biodegradability (>90 %) and relatively low In vitro cytotoxicity. Also, the EP/S-C nanocomposite film displayed potential to extend the shelf life of fresh cut apple slices (>24 h), perishable cherry tomatoes and blueberries (>6 days). The results suggested that the EOs@PDA/SPI-CMC nanocomposite film had a great possibility in the field of biodegradable and antimicrobial materials for food packaging.

Multifunctional polydopamine - Zn2+-curcumin coated additively manufactured ceramic bone grafts with enhanced biological properties

The lack of site-specific chemotherapeutic agents after osteosarcoma surgeries often induces severe side effects. We propose the utilization of curcumin as an alternative natural chemo-preventive drug for tumor-specific delivery systems with 3D printed tricalcium phosphate (TCP) based artificial bone grafts. The poor bioavailability and hydrophobic nature of curcumin restrict its clinical use. We have used polydopamine (PDA) coating with Zn2+ functionalization to enhance the curcumin release in the biological medium. The obtained PDA-Zn2+ complex is characterized by X-ray photoelectron spectroscopy (XPS). The presence of PDA-Zn2+ coating leads to ~2 times enhancement in curcumin release. We have computationally predicted and validated the optimized surface composition by a novel multi-objective optimization method. The experimental validation of the predicted compositions indicates that the PDA-Zn2+ coated curcumin immobilized delivery system leads to a ~12 folds decrease in osteosarcoma viability on day 11 as compared to only TCP. The osteoblast viability shows ~1.4 folds enhancement. The designed surface shows the highest ~90 % antibacterial efficacy against gram-positive and gram-negative bacteria. This unique strategy of curcumin delivery with PDA-Zn2+ coating is expected to find application in low-load bearing critical-sized tumor-resection sites.

D-A Structured High-Performance Photothermal/Photodynamic Thionin-Synthetic Melanin Nanoparticles for Rapid Bactericidal and Wound Healing Effects

Synthesized melanin nanoparticles (SMNPs) are used as advanced photothermal materials. However, their internal structures are complex and disordered, and tuning the photothermal performance of nanoparticles is still a hot spot of concern. This article presents thionin (Th)-doped SMNPs, namely Th-SMNPs, which are the first SMNPs formed using the one-pot polymerization of Th with Levodopa. Th can undergo Michael addition and Schiff base reaction between indole dihydroxy/indolequinone and their oligomers to form donor-acceptor pairs in the structure to modulate the photothermal performance of SMNPs. Structural and spectroscopic analyses and density functional theory simulations further confirm the existence of the donor-acceptor structure. Th-SMNPs exhibit excellent total photothermal efficiency (34.49%) in the near-infrared region (808 nm), which is a 60% improvement compared to SMNPs. This allows Th-SMNPs to exhibit excellent photothermal performance at low power 808 nm laser irradiation. Meanwhile, Th not only enhances the photothermal properties of SMNPs, but also imparts photodynamic effects to SMNPs. Th-SMNPs can produce 1 O2 under 660 nm laser irradiation. A dual-function photothermal and photodynamic textile named Th-SMNPs@cotton is constructed based on Th-SMNPs, which can act as a rapid photothermal/photodynamic sterilization and is promising for wound healing treatment of bacterial infections under low-power dual laser irradiation.

Polymer-based nanosystems and their applications in bone anticancer therapy

The mortality rate of bone cancer has witnessed a substantial reduction in recent years, all thanks to the advent of advanced cancer treatment modalities such as surgical intervention, radiation, and chemotherapy. Nevertheless, these popular modalities come with a set of clinical challenges, including non-specificity, side effects, and drug intolerance. In recent years, polymer-based nanosystems have emerged as a promising solution in bone anti-cancer therapy by virtue of their unique physical and chemical properties. These nanosystems can be tailored for use in different drug release mechanisms for therapeutic implementations. This review delves into the efficacy of these therapy applications in bone cancer (with a focus on one of the most common types of cancers, Osteosarcoma) treatment and their correlation with the properties of polymer-based nanosystems, in addition to their interaction with the tumor microenvironment and the biological milieu.

Antisenescence ZIF-8/Resveratrol Nanoformulation with Potential for Enhancement of Bone Fracture Healing in the Elderly

Accumulation of senescent cells in the elderly impairs bone homeostasis. It is important to alleviate cell senescence and scavenge excessive oxidative stress for enhanced bone fracture healing in elderly patients. In this study, resveratrol (RSV), an antioxidant drug, was encapsulated in a biocompatible zeolitic imidazolate framework-8 (ZIF-8) nanoparticle to protect it from oxidation and improve its bioavailability. Cells responsible for bone healing, including osteoblasts, bone marrow-derived mesenchymal stem cells (BMSCs), macrophages, and endothelial cells, were used to evaluate the regulatory role of the nanoformulation in the alleviation of cellular senescence and promotion of cell functions. It was proved that the nanoformulation sustainably released RSV with well-preserved bioactivity and improved bioavailability. Cell experiments confirmed that ZIF-8/RSV was capable of alleviating the senescence of cells [human osteoblasts (HOBs), BMSCs, H₂O₂-induced senescent vascular endothelial cells (HUVECs)] and scavenging excessive intracellular reactive oxygen species (ROS). Excitingly, the ZIF-8/RSV improved the osteogenic ability of senescent osteoblasts and promoted macrophage M2 polarization. In addition, the ZIF-8/RSV also enhanced the angiogenic function of senescent HUVECs. More importantly, the ZIF-8/RSV nanoformulation outperformed the REV alone, indicating the critical role of encapsulation using ZIF-8. These findings suggest that the ZIF-8/RSV nanoformulation exhibits potential for bone fracture treatment in elderly patients.

Preparation and characterization of emamectin benzoate nanocapsules based on the dual role of polydopamine

BACKGROUND

Developing pesticide-controlled release formulations with foliage adhesion has become the focus of current research in the field of crop protection. In this study, an excellent adhesive nanocapsule loaded with emamectin benzoate (Eb@PDA) was prepared via emulsion interfacial polymerization based on the self-polymerization ability and adhesion properties of polydopamine (PDA).

RESULTS

The physicochemical properties of the Eb@PDA were characterized by scanning electron microscopy, transmission electron microscopy, particle size statistics, Fourier transform infrared spectroscopy and X-ray diffraction. The Eb@PDA presented a regular spherical shape, with an average particle size of 163.8 nm. Compared with conventional formulations, it had higher pesticide-loading content (34%) and excellent adhesion onto corn leaf. In addition, Eb@PDA showed sustained-release characteristics, facilitating the release of Eb at low pH and high temperature. Eb@PDA could effectively protect Eb against photodegradation and had a longer effective period for controlling Spodoptera frugiperda and Spodoptera exigua. Furthermore, acute toxicity tests showed that the 50% lethal concentration (LC₅₀ ) was 80.91 and 57.91 mg kg^-1 at 7 and 14 days, respectively, indicating a lower toxicity of the Eb@PDA to earthworms. The cells (L02) treated with Eb@PDA showed a higher cell viability but a lower apoptosis rate (only 5.75%), demonstrating the lower cytotoxicity of the Eb@PDA.

CONCLUSION

The self-prepared Eb@PDA could be used as a formulation with the advantages of slow release, UV shielding, strong leaf adhesion, superior insecticidal properties, sustained effectiveness and biosafety. It will also facilitate the development of an efficient and safe pesticide delivery system. © 2022 Society of Chemical Industry.

An injectable and biodegradable hydrogel incorporated with photoregulated NO generators to heal MRSA-infected wounds

The development of degradable hydrogel fillers with high antibacterial activity and wound-healing property is urgently needed for the treatment of infected wounds. Herein, an injectable, degradable, photoactivated antibacterial hydrogel (MPDA-BNN6@Gel) was developed by incorporating BNN6-loaded mesoporous polydopamine nanoparticles (MPDA-BNN6 NPs) into a fibrin-based hydrogel. After administration, MPDA-BNN6@Gel created local hyperthermia and released large quantities of NO gas to treat methicillin-resistant Staphylococcus aureus infection under the stimulation of an 808 nm laser. Experiments confirmed that the bacteria were eradicated through irreversible damage to the cell membrane, genetic metabolism, and material energy. Furthermore, in the absence of laser irradition, the fibrin and small amount of NO that originated from MPDA-BNN6@Gel promoted wound healing in vivo. This work indicates that MPDA-BNN6@Gel is a promising alternative for the treatment of infected wounds and provides a facile tactic to design a photoregulated bactericidal hydrogel for accelerating infected wound healing. STATEMENT OF SIGNIFICANCE: The development of a degradable hydrogel with high antibacterial activity and wound-healing property is an urgent need for the treatment of infected wounds. Herein, an injectable, degradable, and photo-activated antibacterial hydrogel (MPDA-BNN6@Gel) has been developed by incorporating BNN6-loaded mesoporous polydopamine nanoparticles (MPDA-BNN6 NPs) into a fibrin-based hydrogel. After administration of MPDA-BNN6@Gel, the MPDA-BNN6@Gel could generate local hyperthermia and release large quantities of NO gas to treat the methicillin-resistant Staphylococcus aureus infection under the irradiation of 808 nm laser. Furthermore, in the absence of a laser, the fibrin and a small amount of NO originating from MPDA-BNN6@Gel could promote wound healing in vivo.

Amyloid Protein-Biofunctionalized Polydopamine Nanoparticles Demonstrate Minimal Plasma Protein Fouling and Efficient Photothermal Therapy

Polydopamine (PDA) shows great application potential in photothermal therapy (PTT) of tumors due to its excellent photothermal performance. However, PDA rich in a large number of catechin structures, with strong adhesion, can readily attach to plasma proteins in blood to form protein corona, which greatly hinders the transfer efficiency to tumors and reduces the bioavailability. In this paper, a simple, rapid phase-transitioned albumin biomimetic nanocorona (TBSA) is used for the surface camouflage of PDA nanoparticles for minimal plasma protein fouling and efficient PTT. TBSA coating is formed by the BSA-derived amyloid through the hydrophobic aggregation near the isoelectric point and the rupture of disulfide bonds by tris(2-carboxyethyl) phosphine. The stable PDA@TBSA complexes are formed by camouflaging TBSA onto the surface of PDA through hydrophobic, electrostatic, and covalent binding between TBSA and PDA, which showed excellent anti-plasma protein adsorption properties profited from the surface charge of PDA@TBSA approaching equilibrium and the surface passivation of BSA. The plasma protein thickness of the PDA@TBSA surface is 6 times lower than that of PDA at adsorption saturation. In vitro and in vivo experiments have revealed that PDA@TBSA has an excellent photothermal antitumor effect compared to PDA. Both PDA and PDA@TBSA treatment plus 808 nm laser irradiation result in more than 70% inhibition on tumor cell proliferation. In addition, PDA@TBSA does not cause a significant inflammatory response and tissue damage. Taken together, the TBSA coating endows PDA with low-fouling functions in blood and improves the residence time of PDA in blood and enrichment in the tumor tissue. This work offers a novel and efficient strategy for the design of functional nanosystems exploiting the speciality of the biomolecular corona formation around nanomaterials.

Recent Advances in Nanoplatforms for the Treatment of Osteosarcoma

Osteosarcoma (OS) is the most common primary bone tumor in children and young people. Traditional surgical excision combined with chemotherapy presents many limitations, such as resistance and systemic side effects of chemotherapy drugs, postoperative recurrence, and bone defects. Given these limitations, novel therapeutic modalities for OS treatment using nanometer-sized platform-based chemotherapeutic delivery have emerged as a promising alternative therapy. This form of therapy offers multiple advantages, such as accurate delivery of the drug to the tumor site and repair of limited bone defects after tumor resection. In this review, we briefly summarize nanoplatforms, including liposomes, polymeric nanoparticles, inorganic nanoparticles, nanomicelles, dendrimers, nanocapsules, and exosomes. The essential shortcomings involved in these nanoplatforms, such as poor stability, immunogenicity, insufficient circulation, and drug leakage are also discussed, and related solutions are briefly proposed. Finally, the application prospects of nanoplatforms in the treatment of OS are discussed.

Versatile Polymer Nanocapsules via Redox Competition

Polymer nanocapsules have demonstrated significant value in materials science and biomedical technology, but require complicated and time-consuming synthetic steps. We report here the facile synthesis of monodisperse polymer nanocapsules via a redox-mediated kinetic strategy from two simple molecules: dopamine and benzene-1,4-dithiol (BDT). Specifically, BDT forms core templates and modulates the oxidation kinetics of dopamine into polydopamine (PDA) shells. These uniform nanoparticles can be tuned between ≈70 and 200 nm because the core diameter directly depends on BDT while the shell thickness depends on dopamine. The supramolecular core can then rapidly disassemble in organic solvents to produce PDA nanocapsules. Such nanocapsules exhibit enhanced physicochemical performance (e.g., loading capacity, photothermal transduction, and anti-oxidation) versus their solid counterparts. Particularly, this method enables a straightforward encapsulation of functional nanoparticles providing opportunities for designing complex nanostructures such as yolk-shell nanoparticles.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

Immunochromatographic Assay Based on Polydopamine-Decorated Iridium Oxide Nanoparticles for the Rapid Detection of Salbutamol in Food Samples

Salbutamol (SAL), a β-2 adrenoreceptor agonist, is an unpopular addition to livestock and poultry, causing several side effects to human health. Thus, it is very important to develop a simple and rapid analytical method to screen SAL in the field of food safety. Here, we present an immunochromatographic assay (ICA) method for sensitively detecting SAL with polydopamine-decorated iridium oxide nanoparticles (IrO₂@PDA NPs) as a signal tag. The IrO₂@PDA with excellent hydrophilicity, biocompatibility, and stability was synthesized by oxidating self-polymerization of dopamine hydrochloride (DAH) on the surface of IrO₂ NPs and used to label monoclonal antibodies (mAbs) through simple physical adsorption. Compared with IrO₂ NPs, the IrO₂@PDA also possessed superior optical properties and higher affinity with mAbs. With the proposed method, the limit of detection for SAL was 0.002 ng/mL, which was improved at least 24-fold and 180-fold compared with the IrO₂ NPs-based ICA and conventional gold nanoparticles-based ICA, respectively. Furthermore, the SAL residuals in pork, pork liver, and beef were successfully detected by the developed biosensor and the recoveries ranged from 85.56% to 115.56%. Briefly, this work indicated that the powerful IrO₂@PDA-based ICA can significantly improve detection sensitivity and has huge potential for accurate and sensitive detection of harmful small molecules analytes in food safety fields.

Phenolic-enabled nanotechnology: versatile particle engineering for biomedicine

Phenolics are ubiquitous in nature and have gained immense research attention because of their unique physiochemical properties and widespread industrial use. In recent decades, their accessibility, versatile reactivity, and relative biocompatibility have catalysed research in phenolic-enabled nanotechnology (PEN) particularly for biomedical applications which have been a major benefactor of this emergence, as largely demonstrated by polydopamine and polyphenols. Therefore, it is imperative to overveiw the fundamental mechanisms and synthetic strategies of PEN for state-of-the-art biomedical applications and provide a timely and comprehensive summary. In this review, we will focus on the principles and strategies involved in PEN and summarize the use of the PEN synthetic toolkit for particle engineering and the bottom-up synthesis of nanohybrid materials. Specifically, we will discuss the attractive forces between phenolics and complementary structural motifs in confined particle systems to synthesize high-quality products with controllable size, shape, composition, as well as surface chemistry and function. Additionally, phenolic's numerous applications in biosensing, bioimaging, and disease treatment will be highlighted. This review aims to provide guidelines for new scientists in the field and serve as an up-to-date compilation of what has been achieved in this area, while offering expert perspectives on PEN's use in translational research.

High-throughput screening of multifunctional nanocoatings based on combinations of polyphenols and catecholamines

Biomimetic surface coatings based on plant polyphenols and catecholamines have been used broadly in a variety of applications. However, the lack of a rational cost-effective platform for screening these coatings and their properties limits the true potential of these functional materials to be unleashed. Here, we investigated the oxidation behavior and coating formation ability of a library consisting of 45 phenolic compounds and catecholamines. UV-vis spectroscopy demonstrated significant acceleration of oxidation and polymerization under UV irradiation. We discovered that several binary mixtures resulted in non-additive behavior (synergistic or antagonistic effect) yielding much thicker or thinner coatings than individual compounds measured by ellipsometry. To investigate the properties of coatings derived from new combinations, we used a miniaturized high-throughput strategy to screen 2,532 spots coated with single, binary, and ternary combinations of coating precursors in one run. We evaluated the use of machine learning models to learn the relation between the chemical structure of the precursors and the thickness of the nanocoatings. Formation and stability of nanocoatings were investigated in a high-throughput manner via discontinuous dewetting. 30 stable combinations (hits) were used to tune the surface wettability and to form water droplet microarray and spot size gradients of water droplets on the coated surface. No toxicity was observed against eukaryotic HeLa cells and Pseudomonas aeruginosa (strain PA30) bacteria after 24 h incubation at 37 °C. The strategy introduced here for high-throughput screening of nanocoatings derived from combinations of coating precursors enables the discovery of new functional materials for various applications in science and technology in a cost-effective miniaturized manner.

Polydopamine-Based Nanoparticles for Photothermal Therapy/Chemotherapy and their Synergistic Therapy with Autophagy Inhibitor to Promote Antitumor Treatment

Polydopamine (PDA) has attracted much attention recently due to its strong adhesion capability to most substrates. After combining with organic (such as organic metal framework, micelles, hydrogel, polypeptide copolymer) or inorganic nanomaterials (such as gold, silicon, carbon), polydopamine-based nanoparticles (PDA NPs) exhibit the merging of characteristics. Until now, the preparation methods, polymerization mechanism, and photothermal therapy (PTT) or chemotherapy (CT) applications of PDA NPs have been reported detailly. Since the PTT or CT treatment process is often accompanied by exogenous stimuli, tumor cells usually induce pro-survival autophagy to protect the cells from further damage, which will weaken the therapeutic effect. Therefore, an in-depth understanding of PDA NPs modulated PTT, CT, and autophagy is required. However, this association is rarely reviewed. Herein, we briefly described the relationship between PTT/CT, autophagy, and tumor treatment. Then, the outstanding performances of PDA NPs in PTT/CT and their combination with autophagy inhibitors for tumor synergistic therapy have been summarized. This work is expected to shed light on the multi-strategy antitumor therapy applications of PDA NPs.

Nanomaterials for Cardiac Tissue Engineering

End stage heart failure is a major cause of death in the US. At present, organ transplant and left-ventricular assist devices remain the only viable treatments for these patients. Cardiac tissue engineering presents the possibility of a new option. Nanomaterials such as gold nanorods (AuNRs) and carbon nanotubes (CNTs) present unique properties that are beneficial for cardiac tissue engineering approaches. In particular, these nanomaterials can modulate electrical conductivity, hardness, and roughness of bulk materials to improve tissue functionality. Moreover, they can deliver bioactive cargo to affect cell phenotypes. This review covers recent advances in the use of nanomaterials for cardiac tissue engineering.

Development of long-circulating lapachol nanoparticles: formation, characterization, pharmacokinetics, distribution and cytotoxicity

Lapachol is an active compound for the treatment of malignant brain glioma. However, its physicochemical properties limit its clinical application. The purpose of this study is to develop a nano-drug delivery system (LPC-LP) loaded with lapachol (LPC), which remarkably prolongs the half-life in the body, and increases the brain intake, therefore, achieving a better anticancer effect in the treatment of glioma. In order to optimize the formulation of liposomes, an orthogonal design was adopted with entrapment efficiency (EE) as the index. The characterization of the optimized formulation was evaluated in vitro. To assess the safety profile and effect of LPC-LP, a rapid and sensitive ultra-fast liquid chromatography with tandem mass spectrometry (UPLC-MS/MS) method was developed for studying the pharmacokinetics and brain distribution of LPC-LP and LPC. Finally, the cytotoxicity of the two preparations on C6 cells was studied by the MTT assay. The results showed that the average particle size of LPC-LP was 85.92 ± 2.35 nm, the EE of liposomes was 92.52 ± 1.81%, and the charge potential was −40.70 ± 9.20 mV. An in vitro release study showed that the release of lapachol from LPC-LP was delayed compared to LPC, indicating that LPC-LP was a sustained and controlled release system. The UPLC-MS/MS method was fully validated in both plasma and brain tissue according to the Food and Drug Administration (FDA) recommended guidelines, and successfully used for quantification of lapachol in vivo. After intravenous administration, LPC-LP prolonged circulation time of lapachol in the body and increased brain intake. Besides, the MTT results revealed that the IC₅₀ value of LPC-LP on C6 cells significantly decreased, compared with LPC, which further confirmed that LPC-LP enhanced the inhibition of C6 cells and improved the anti-glioma effect. In conclusion, LPC-LP could serve as a promising candidate for the clinical application of lapachol in the treatment of glioma.

LPC-LP is a promising and potential nanoparticle in the treatment of glioma.

Tuning the Surface Chemistry of Melanin-Mimetic Polydopamine Nanoparticles Drastically Enhances Their Accumulation into Excised Human Skin

Melanin-mimetic polydopamine nanoparticles (PDA NPs) are emerging as promising candidates for topical and transdermal drug delivery because they mimic melanin, a naturally occurring skin pigment. However, our knowledge of their interactions with human skin remains limited. Hence, we set out to investigate the role of PDA NP surface chemistry in modulating their skin deposition. PDA NPs were synthesized by base-catalyzed oxidative self-polymerization of dopamine and functionalized with poly(ethylene glycol) (PEG) bearing different termini to obtain neutral, anionic, cationic, and hydrophobic PEGylated NPs. NPs were characterized by dynamic light scattering, transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray photoelectron spectroscopy. The NPs were then labeled with rhodamine B, and their skin interactions were investigated both in vitro, using a Strat-M membrane, and ex vivo, using excised whole thickness human skin. In vitro diffusion studies revealed that the NPs did not permeate transdermally, rather the NPs accumulated in the Strat-M membrane after 24 h of incubation. Membrane deposition of the NPs showed a strong dependence on surface chemistry, with anionic (unmodified and carboxyl-terminated PEGylated) NPs achieving the highest accumulation, followed by neutral and cationic NPs, whereas hydrophobic NPs achieved the lowest degree of accumulation. In ex vivo permeation studies, we observed that surface modification of PDA NPs with PEG serving as an antifouling coating is essential to maintaining colloidal stability upon skin contact. Moreover, anionic PEGylated NPs were able to achieve 78% skin accumulation, which was significantly higher than neutral and cationic NPs (51 and 34% accumulation, respectively). Our findings provide important insights into the role of surface chemistry in enhancing the skin accumulation of melanin-mimetic PDA NPs as potential sunscreens and carriers for skin-targeted treatments.

pH-Responsive dopamine-based nanoparticles assembled via Schiff base bonds for synergistic anticancer therapy

Dopamine-based nanoparticles are constructed via Schiff base bonds to serve as pH-responsive drug nanocarriers for combined photodynamic therapy and chemotherapy.

Polydopamine as a stable and functional nanomaterial

The mussel inspired chemistry of dopamine leading to versatile coatings on the surface of all kinds of materials in a one pot process was considered as the unique aspect of catecholamine for a long time. Only recently, research has been undertaken to valorize the simultaneous oxidation and colloid formation in dopamine solutions in the presence of an oxidant. This mini review summarizes the synthesis methods allowing to get controlled nanomaterials, either nanoparticles, hollow capsules or nanotubes and even chiral nanomaterials from dopamine solutions. Finally the applications of those nanomaterials will be described.

Perspectives of Molecularly Imprinted Polymer-Based Drug Delivery Systems in Cancer Therapy

Despite the considerable effort made in the past decades, multiple aspects of cancer management remain a challenge for the scientific community. The severe toxicity and poor bioavailability of conventional chemotherapeutics, and the multidrug resistance have turned the attention of researchers towards the quest of drug carriers engineered to offer an efficient, localized, temporized, and doze-controlled delivery of antitumor agents of proven clinical value. Molecular imprinting of chemotherapeutics is very appealing in the design of drug delivery systems since the specific and selective binding sites created within the polymeric matrix turn these complex structures into value-added carriers with tunable features, notably high loading capacity, and a good control of payload release. Our work aims to summarize the present state-of-the art of molecularly imprinted polymer-based drug delivery systems developed for anticancer therapy, with emphasis on the particularities of the chemotherapeutics’ release and with a critical assessment of the current challenges and future perspectives of these unique drug carriers.

Tailoring Synthetic Melanin Nanoparticles for Enhanced Photothermal Therapy

Melanin and its synthetic analogs (i.e., polydopamine nanomaterials) are able to transform a near-infrared (NIR) light energy source to heat for the selective killing of cancer cells. Although many of the effects on these nontoxic photothermal agents have been well documented, a concern has arisen that the extended usage of these natural and synthetic melanins might be hindered by their limited photothermal effects under low-density light irradiation. To address this issue, herein, we propose a rational and green fabrication strategy toward a new class of synthetic melanin nanoparticles (SMNPs) with superior photothermal effects via the one-pot copolymerization of two kinds of naturally occurring monomers (arginine and dopamine). The total photothermal efficiencies of these arginine-doped SMNPs could be significantly improved (i.e., ∼60% increase) by enhancing 808 nm NIR light absorption via the construction of donor-acceptor microstructures within SMNPs and decreasing nonthermal radiative transition processes via the increase of free radical concentrations within SMNPs. The resulting SMNPs demonstrated higher photothermal therapy efficiencies in both killing 4T1 cancer cells in vitro and suppressing tumor growth and recurrence compared with conventional agents. This work offers new opportunities in the structural and functional tailoring of melanin-inspired nanomaterials for cancer treatment via green fabrication strategies.

Nature-Inspired Polymerization of Quercetin to Produce Antioxidant Nanoparticles with Controlled Size and Skin Tone-Matching Colors

Plant polyphenols have received considerable attention in recent years due to their ability to undergo oxidation-triggered self-polymerization, forming biocompatible versatile coatings and templated nanoparticles (NPs) that can be leveraged for a variety of biomedical applications. Here we show for the first time that untemplated NPs can be conveniently synthesized from the abundant plant polyphenol quercetin (QCT) simply by incubation with an oxidizing agent in a universal organic solvent, followed by self-assembly upon gradual addition of water. The process yielded NPs of around 180-200 nm in size with a range of colors that resembled light to medium-brown skin tones. The NPs were characterized by UV-Vis, FT-IR, and 1H-NMR spectroscopy and by dynamic light scattering and transmission electron microscopy to understand their physicochemical properties. Antioxidant and cell viability assays were also conducted to demonstrate the NPs' free-radical scavenging activity and biocompatibility, altogether providing valuable insights into the structure and function of this emerging class of nanomaterials to guide future biomedical applications.