Dynamic Bipolar Electrode Array for Visualized Screening of Electrode Materials in Light-Emitting Electrochemical Cells

Wireless Multimodal Light-Emitting Arrays Operating on the Principles of LEDs and ECL

Electrochemistry-based light-emitting devices have gained considerable attention in different applications such as sensing and optical imaging. In particular, such systems are an interesting alternative for the development of multimodal light-emitting platforms. Herein we designed a multicolor light-emitting array, based on the electrochemical switch-on of light-emitting diodes (LEDs) with a different intrinsic threshold voltage. Thermodynamically and kinetically favored coupled redox reactions, i. e. the oxidation of Mg and the reduction of protons on Pt, act as driving force to power the diodes. Moreover, this system enables to trigger an additional light emission based on the interfacial reductive-oxidation electrochemiluminescence (ECL) mechanism of the Ru(bpy)3 2+/S2O8 2- system. The synergy between these light-emission pathways offers a multimodal platform for the straightforward optical readout of physico-chemical information based on composition changes of the solution.

A dual-readout sensing platform for the evaluation of cell viability integrating with optical and digital signals based on a closed bipolar electrode

Cell viability is essential for predicting drug toxicity and assessing drug effects in drug screening. However, the over/underestimation of cell viability measured by traditional tetrazolium colorimetric assays is inevitable in cell-based experiments. Hydrogen peroxide (H2O2) secreted by living cells may provide more comprehensive information about the cell state. Hence, it is significant to develop a simple and rapid approach for evaluating cell viability by measuring the excreted H2O2. In this work, we developed a dual-readout sensing platform based on optical and digital signals by integrating a light emitting diode (LED) and a light dependent resistor (LDR) into a closed split bipolar electrode (BPE), denoted as BP-LED-E-LDR, for evaluating cell viability by measuring the H2O2 secreted from living cells in drug screening. Additionally, the customized three-dimensional (3D) printed components were designed to adjust the distance and angle between the LED and LDR, achieving stable, reliable and highly efficient signal transformation. It only took 2 min to obtain response results. For measuring the exocytosis H2O2 from living cells, we observed a good linear relationship between the visual/digital signal and logarithmic function of MCF-7 cell counts. Furthermore, the fitted half inhibitory concentration curve of MCF-7 to doxorubicin hydrochloride obtained by the BP-LED-E-LDR device revealed a nearly identical tendency with the cell counting kit-8 assay, providing an attainable, reusable, and robust analytical strategy for evaluating cell viability in drug toxicology research.

High-Throughput Surface-Enhanced Raman Scattering for Screening Chemical Sensor Candidates Enabled by Bipolar Electrochemistry

A variety of hydrothermal or electrochemical methods have been explored to prepare noble metal nanostructures as surface-enhanced Raman scattering (SERS) substrates. However, most of those metallic nanoarrays are structurally homogeneous, which makes it laborious to select the high-performance substrates for particular Raman sensing purposes. Here, a high-throughput SERS imaging strategy is demonstrated for the first time for screening chemical sensors with sub-nanomolar sensitivities. Bipolar electrochemistry was applied to generate Au or Au-Ag gradient nanoarrays with diverse chemical compositions, morphologies, and particle dimensions ranging from several nanometers to micrometers. The selected "hot-spots" on the Au-Ag alloy nanoarray exhibited a 660-fold enhancement in SERS intensity compared to those on the pure Au gradient nanoarray. The SERS screening of 4-aminothiophenol, 4-nitrothiophenol, and 4-mercaptobenzoic acid was carried out that provided a limit of detection (LOD) between 1 and 5 pM. The distinctive LODs among three thiophenolic Raman probes are ascribed to the differences in the affinity of the probe to the alloy, orientation of the metal-ligand monolayer, or plasmonic environment of the nanoarray surface. As a continuous, rapid, and cost-effective manner to fabricate transitional nanostructures and screen out SERS responsive sites, this method not only facilitates controllable synthesis of noble metal nanoarrays but has the potential to provide an alternative tool for ultrasensitive chemical sensing on a wide range of bimetallic substrates.

Label-Free Electrochemiluminescence Imaging of Single-Cell Adhesions by Using Bipolar Nanoelectrode Array

A label-free and fast approach for positive electrochemiluminescence (ECL) imaging of single cells by bipolar nanoelectrode array is proposed. The reduction of oxygen at a platinized gold nanoelectrode array in a closed bipolar electrochemical system is coupled with an oxidative ECL process at the anodic side. For elevating the ECL imaging contrast of single cells, a driving voltage of -2.0 V is applied to in situ generate oxygen confined beneath cells that is subsequently used for ECL imaging at 1.1 V. High oxygen concentration in the confined space resulting from steric hindrance generates prominent oxygen reduction current at the cathodic side and higher ECL intensity at the anodic side, allowing positive ECL imaging of the cells adhesion region with excellent contrast. Cell morphology and adhesion strength can be successfully imaged with high image acquisition rate. This approach opens a new avenue for label-free imaging of single cells.

Electrochemiluminescence and Photoluminescence of Carbon Quantum Dots Controlled by Aggregation-Induced Emission, Aggregation-Caused Quenching, and Interfacial Reactions

Carbon quantum dots (CQDs) show promise in optoelectronics as a light emitter due to simple synthesis, biocompatibility and strong tunable light emissions. However, CQDs commonly suffer from aggregation caused quenching (ACQ), inhibiting the full potential of these light emitters. Studies into different ideal light emitters have shown enhancements when converting common ACQ effects to aggregation induced emission (AIE) effects. We report CQD synthesis using citric acid and high/low thiourea concentrations, or sample 2/1. These two CQDs exhibited AIE and ACQ PL effects, respectively. CQD characterizations and photoluminescence interrogations of CQD films and solutions revealed that these unique emission mechanisms likely arose from different S incorporations into the CQDs. Furthermore, it was discovered that sample 2 emitted electrochemiluminescence (ECL) more intensely than sample 1 in a homogenous solution with S₂O₈^2- as a coreactant, due to aggregation and interactions of CQD species in solution. Very interestingly, sample 1's CQD film|S₂O₈^2- system achieved an ECL efficiency of 26% and emitted roughly 26 times more efficiently than sample 2 in the same conditions. Predominant interfacial reactions and surface state emission produced intense white light with a correlated color temperature of 2000 K. Spooling ECL spectroscopy was utilized to investigate emission mechanisms. Sample 2's CQD film|TPrA system had four times higher ECL intensity than that of sample 1, most likely due to π-cation interactions leading to a strong CQD^•+ stability, thereby, enhancing ECL. It is anticipated that ECL enhancement of CQD films or solutions by means of AIE will lead to wide CQD optoelectronic applications.

Electrogenerated Chemiluminescence and Electroluminescence of N-Doped Graphene Quantum Dots Fabricated from an Electrochemical Exfoliation Process in Nitrogen-Containing Electrolytes

Artificial lighting sources are one of the most important technological developments for our modern lives; the search for cost-effective and efficient luminophores is therefore crucial to a sustainable future. Graphene quantum dots (GQDs) are carbon-based nanomaterials that exhibit exceptional optical and electronic properties, making them a prime candidate for a luminophore in a light-emitting device. Nitrogen-doped GQDs fabricated from a facile top-down electrochemical exfoliation process with a nitrogen-containing electrolyte in this report showed strong photoluminescent emission at 450 nm, and electrogenerated chemiluminescence at 660 nm in the presence of benzoyl peroxide as a coreactant. When introduced into solid-state light-emitting electrochemical cells, for the first time, the GQDs displayed a broad white emission centered at 610 nm, corresponding to Commision Internationale de l'eclairage (CIE) colour coordinates of (0.38, 0.36).

Rational Design of Efficient Organometallic Ir(III) Complexes for High-Performance, Flexible, Monochromatic, and White Light-Emitting Electrochemical Cells

Highly efficient light-emitting electrochemical cells (LECs) have attracted tremendous interest because of their simple structures and low-cost fabrication processing, showing great potential for full-color displays and solid-state lighting. In this work, we rationally designed and synthesized two red-emitting cationic Ir(III) complexes, [Ir(tBuPBI)₂(biq)]PF₆ (R1) and [Ir(tBuPBI)₂(qibi)]PF₆ (R2), in which a tert-butyl-functionalized 1,2-diphenyl-1H-benzo[d]imidazole (PBI) unit and conjugated 2,2'-biquinoline (biq) and 2-(1-phenyl-1H-benzo[d]imidazol-2-yl)quinolone (qibi) were employed as cyclometalated and ancillary ligands, respectively. The introduced tert-butyl group led to homogeneous and highly emissive thin films by increasing the solubility and suppressing the strong intermolecular interactions due to steric hindrance. Based on the abovementioned high-quality emissive layer, high-efficiency LECs were achieved. An efficient red-emitting LEC fabricated on a glass substrate achieved a current efficiency (η_C) of 7.18 cd/A and an external quantum efficiency (η_ext) of 9.32%. By doping both complexes into a blue-green-emitting cationic Ir(III) complex, high-performance white LECs were also successfully fabricated with Commission International de L'Eclairage (CIE) coordinates of (0.39,0.39), a η_C of 17.43 cd/A, and a η_ext of 8.92%. In addition, we also fabricated flexible red and white LECs with outstanding efficiencies and mechanical flexibilities. The η_C and η_ext values of a flexible white LEC could be as high as 13.50 cd/A and 6.86%, respectively. The efficiency of the flexible device remained at approximately 95% of the initial value after 500 bends with a radius of curvature of 5 mm, demonstrating the great potential of these complexes for full-color displays and flexible optoelectronics.

Enhanced Bipolar Electrochemistry at Solid-State Micropores: Demonstration by Wireless Electrochemiluminescence Imaging

Bipolar electrochemistry (BPE) is a powerful method based on the wireless polarization of a conductive object that induces the asymmetric electroactivity at its two extremities. A key physical limitation of BPE is the size of the conductive object because the shorter the object, the larger is the potential necessary for sufficient polarization. Micrometric and nanometric objects are thus extremely difficult to address by BPE due to the very high potentials required, in the order of tens of kV or more. Herein, the synergetic actions of BPE and of planar micropores integrated in a microfluidic device lead to the spatial confinement of the potential drop at the level of the solid-state micropore, and thus to a locally enhanced polarization of a bipolar electrode. Electrochemiluminescence (ECL) is emitted in half of the electroactive micropore and reveals the asymmetric polarization in this spatial restriction. Micrometric deoxidized silicon electrodes located in the micropore are polarized at a very low potential (7 V), which is more than 2 orders of magnitude lower compared to the classic bipolar configurations. This behavior is intrinsically associated with the unique properties of the micropores, where the sharp potential drop is focused. The presented approach offers exciting perspectives for BPE of micro/nano-objects, such as dynamic BPE with objects passing through the pores or wireless ECL-emitting micropores.