Highly Electroactive Ni Pyrophosphate/Pt Catalyst toward Hydrogen Evolution Reaction

Laser-Synthesized Ru-Anchored Few-Layer Black Phosphorus for Superior Hydrogen Evolution: Role of Acoustic Levitation

Electrochemical water splitting, driven by processed catalysts, is the most reasonable method for hydrogen production. This study demonstrates an activation phenomenon with ruthenium (Ru) nanoclusters on few-layered black phosphorus (BP), greatly enhancing the electrocatalytic hydrogen evolution reaction (HER). Efficient BP exfoliation was achieved using acoustic levitators and pulsed laser irradiation in liquids (PLIL), yielding charge-transfer Ru-nanoclusters on modulated surfaces. Various PLIL parameters were examined for the optimal BP sheet size. After ruthenization, Ru's d-band center facilitated hydrogen adsorption via Ru-H bonding. Synergy between BP's charge-carrier properties and Ru's active sites boosted HER kinetics with an ultralow overpotential of 84 mV at 10 mA/cm2 in KOH. Additionally, the RuO2 || RuBP-2 electrolyzer demonstrated remarkable overall water splitting performance at ∼1.60 V at 10 mA/cm2. These results highlight the pivotal role of metal nanoclusters on exfoliated BP surfaces and offer a refined strategy for high-density electrocatalysts in energy conversion.

Dual roles of sub-nanometer NiO in alkaline hydrogen evolution reaction: breaking the Volmer limitation and optimizing d-orbital electronic configuration

Pt-based nanoclusters toward the hydrogen evolution reaction (HER) remain the most promising electrocatalysts. However, the sluggish alkaline Volmer-step kinetics and the high-cost have hampered progress in developing high-performance HER catalysts. Herein, we propose to construct sub-nanometer NiO to tune the d-orbital electronic structure of nanocluster-level Pt for breaking the Volmer-step limitation and reducing the Pt-loading. Theoretical simulations firstly suggest that electron transfer from NiO to Pt nanoclusters could downshift the Ed-band of Pt and result in the well-optimized adsorption/desorption strength of the hydrogen intermediate (H*), therefore accelerating the hydrogen generation rate. NiO and Pt nanoclusters confined into the inherent pores of N-doped carbon derived from ZIF-8 (Pt/NiO/NPC) were designed to realize the structure of computational prediction and boost the alkaline hydrogen evolution. The optimal 1.5%Pt/NiO/NPC exhibited an excellent HER performance and stability with a low Tafel slope (only 22.5 mv dec-1) and an overpotential of 25.2 mV at 10 mA cm-2. Importantly, the 1.5%Pt/NiO/NPC possesses a mass activity of 17.37 A mg-1 at the overpotential of 20 mV, over 54 times higher than the benchmark 20 wt% Pt/C. Furthermore, DFT calculations illustrate that the Volmer-step could be accelerated owing to the high OH- attraction of NiO nanoclusters, leading to the Pt nanoclusters exhibiting a balance of H* adsorption and desorption (ΔGH* = -0.082 eV). Our findings provide new insights into breaking the water dissociation limit of Pt-based catalysts by coupling with a metal oxide.

Mo2C promoted electrocatalysis of the Pt/Mo2C (C) heterostructure for a superior hydrogen evolution reaction

Constructing a unique electrochemical interface to enhance the catalytic capacity of Pt-based catalysts is indispensable for wider application of the hydrogen evolution reaction (HER). Herein, platinum-analogous molybdenum carbide (Mo₂C) was combined with a lower content of Pt to construct the Pt/Mo₂C (C) heterostructure via a solid-phase method, using ammonium molybdate as the precursor. Vulcan-C served as a support to promote the distribution of the Pt and Mo₂C heterostructure, and cooperative effects between Pt and the Mo₂C heterostructure contributed to the significantly improved catalytic capacity of Pt. The obtained Pt/Mo₂C (C) exhibits superior HER activity and enhanced long-term durability in the acidic medium, with a low overpotential of 38 mV at 10 mA cm^-2 and a low Tafel slope of 24 mV dec^-1. In particular, a drastically enhanced amount of H₂ production can be achieved (6837.28 mmol h^-1 g^-1). This facile approach not only provides a new pathway for constructing novel heterostructures but also gives an insight into the design of cost-effective Pt-based materials for an efficient HER.

Sustainable removal of nitrite waste to value-added ammonia on Cu@Cu2O core-shell nanostructures by pulsed laser technique

The biochemical reduction of nitrite (NO₂^-) ions to ammonia (NH₃) requires six electrons and is catalyzed by the cytochrome c NO₂^- reductase enzyme. This biological reaction inspired scientists to explore the reduction of nitrogen oxyanions, such as nitrate (NO₃^-) and NO₂^- in wastewater, to produce the more valuable NH₃ product. It is widely known that copper (Cu)-based nanoparticles (NPs) are selective for the NO₃^- reduction reaction (NO₃^-RR), but the NO₂^-RR has not been well explored. Therefore, we attempted to address the electrocatalytic conversion of NO₂^- to NH₃ using Cu@Cu₂O core-shell NPs to simultaneously treat wastewater by removing NO₂^- and producing valuable NH₃. The Cu@Cu₂O core-shell NPs were constructed using the pulsed laser ablation of Cu sheet metal in water. The core-shell nanostructure of these particles was confirmed by various characterization techniques. Subsequently, the removal of NO₂^- and the ammonium (NH₄⁺)-N yield rate were estimated using the Griess and indophenol blue methods, respectively. Impressively, the Cu@Cu₂O core-shell NPs exhibited outstanding NO₂^-RR activity, demonstrating a maximum NO₂^- removal efficiency of approximately 94% and a high NH₄⁺-N yield rate of approximately 0.03 mmol h^-1.cm^-2 at -1.6 V vs. a silver/silver chloride reference electrode under optimal conditions. The proposed NO₂^-RR mechanism revealed that the (111) facet of Cu favors the selective conversion of NO₂^- to NH₃ via a six-electron transfer. This investigation may offer a new insight for the rational design and detailed mechanistic understanding of electrocatalyst architecture for the effective conversion of NO₂^- to NH₄⁺.

Abd El-Lateef H, Dao VD, Mohamed IMA. Electrocatalysis of Methanol Oxidation in Alkaline Electrolytes over Novel Amorphous Fe/Ni Biphosphate Material Prepared by Different Techniques

In this work, novel phosphate materials based on bimetallic character (Fe and Ni) were introduced by different chemical fabrication methods, the reflux method (FeNiP-R) and the sol-gel technique (FeNiP-S), and evaluated as non-precious electrodes for methanol electrooxidation in KOH electrolytes. The designed FeNiP-R and FeNiP-S samples were investigated using different characterization techniques, namely TEM, SEM, XPS, BET, DLS, and FT-IR, to describe the impact of the fabrication technique on the chemistry, morphology, and surface area. The characterization techniques indicate the successful fabrication of nanoscale-sized particles with higher agglomeration by the sol-gel technique compared with the reflux strategy. After that, the electrochemical efficiency of the fabricated FeNiP-R and FeNiP-S as electrodes for electrocatalytic methanol oxidation was studied through cyclic voltammetry (CV) at different methanol concentrations and scan rates in addition to impedance analysis and chronoamperometric techniques. From electrochemical analyses, a sharp improvement in the obtained current values was observed in both electrodes, FeNiP-R and FeNiP-S. During the MeOH electrooxidation over FeNiP-S, the current value was improved from 0.14 mA/cm² at 0.402 V to 2.67 mA/cm² at 0.619 V, which is around 109 times the current density value (0.0243 mA/cm² at 0.62 V) found in the absence of MeOH. The designed FeNiP-R electrode showed an improved electrocatalytic character compared with FeNiP-S at different methanol concentrations up to 80 mmol/L. The enhancement of the anodic current density and charge transfer resistance indicates the methanol electrooxidation over the designed bimetallic Fe/Ni-phosphates.

Structural, thermal, and electrochemical studies of biodegradable gel polymer electrolyte for electric double layer capacitor

A quasi-solid-state supercapacitor is fabricated using a biodegradable gel polymer electrolyte (GPE), and graphene nano-platelets (GNPs) capacitive electrodes. The GPE film comprises biodegradable polymer cellulose acetate (CA), ionic liquid, 1-ethyl-3-methylimidazolium thiocyanate (EMImSCN) and dopant salt potassium thiocyanate (KSCN). The polymeric gel films are prepared using the standard “solution cast technique” and characterized by using X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Thermogravemetric analysis (TGA), Impedance spectroscopy, and Linear sweep voltammetry techniques. The synthesized GPE exhibits maximum room temperature ionic conductivity ∼1.2 x 10−3 S cm−1 and an electrochemical stability window of ∼2.4 V. The electrical double layer capacitor (EDLC) is configured by sandwiching the GPE film between two graphene nanoplatelets (GNPs) electrodes. The performance of the EDLC cell is evaluated in terms of specific capacitance, rate, and pulse power by using cyclic voltammetry, and electrochemical impedance measurement techniques.

Cerium-polysulfide redox flow battery with possible high energy density enabled by MFI-Zeolite membrane working with acid-base electrolytes

A pH change can enable high-energy-density RFB (redox flow battery) in an aqueous medium. Nevertheless, a membrane to prevent the ion crossover is needed. This study adopted cerium and polysulfide in an acid-base combined electrolyte with an MFI-Zeolite membrane as a separator. The increased potential with pH change is described by the OCP (open circuit potential) difference, which varies by 0.8 V for the combination of acid-acid and acid-base electrolyte. A decrease of 350 mV at the redox peak potential of Ce³⁺/Ce⁴⁺ and a 10 mV negative potential shift for S₄^2-/2S₂^2- highlights the pH effect between the combination of acid-acid and acid-base electrolyte indicates the influence of pH leading in half-cell of anodic than the opposite cathodic side. The UV-visible spectral analysis for Ce³⁺ and S₄^2- ions displacement shows that cerium and sulfur ions do not migrate to each other half-cell through an MFI-Zeolite membrane. As a result, the current efficiency of 94%, voltage, and energy efficiency of 40%-43% were attained at a current density of 10 mA cm^-2. Moreover, the acid-base composition of the Ce/S system showed an energy density of 378.3 Wh l ^-1.

Understanding the Effects of Ultrasound (408 kHz) on the Hydrogen Evolution Reaction (HER) and the Oxygen Evolution Reaction (OER) on Raney-Ni in Alkaline Media

The hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) occurring at the Raney-Ni mesh electrode in 30 wt.-% aqueous KOH solution were studied in the absence (silent) and presence of ultrasound (408 kHz, ∼54 W, 100% acoustic amplitude) at different electrolyte temperatures (T = 25, 40 and 60 °C). Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) experiments were performed to analyse the electrochemical behaviour of the Raney-Ni electrode under these conditions. Under silent conditions, it was found that the electrocatalytic activity of Raney-Ni towards the HER and the OER depends upon the electrolyte temperature, and higher current densities at lower overpotentials were achieved at elevated temperatures. It was also observed that the HER activity of Raney-Ni under ultrasonic conditions increased at low temperatures (e.g., 25 °C) while the ultrasonic effect on the OER was found to be insignificant. In addition, it was observed that the ultrasonic effect on both the HER and OER decreases by elevating the temperature. In our conditions, it is suggested that ultrasound enhances the electrocatalytic performance of Raney-Ni towards the HER due to principally the efficient gas bubble removal from the electrode surface and the dispersion of gas bubbles into the electrolyte, and this effect depends upon the behaviour of the hydrogen and oxygen gas bubbles in alkaline media.

Non-noble metal (Ni, Cu)-carbon composite derived from porous organic polymers for high-performance seawater electrolysis

The hydrothermal preparation of o-dianisidine and triazine interlinked porous organic polymer and its successive derivatisation via metal infusion (Ni, Cu) under hydrothermal and calcination conditions (700 °C) to yield pristine (ANIPOP-700) and Ni/Cu decorated porous carbon are described here (Ni-ANIPOP-700 and Cu-ANIPOP-700). To confirm their chemical and morphological properties, the as-prepared materials were methodically analyzed using solid state ¹³C and ¹⁵N NMR, X-ray diffraction, Raman spectroscopy, field emission scanning and high resolution transmission electron microscopic techniques, and x-ray photoelectron spectroscopy. Furthermore, the electrocatalytic activities of these electrocatalysts were thoroughly investigated under standard oxygen evolution (OER) and hydrogen evolution reaction (HER) conditions. The results show that all of the materials demonstrated significant activity in water splitting as well as displayed excellent stability (22 h) in both acidic (HER) and basic conditions (OER). Among the electrocatalysts reported in this study, Ni-ANIPOP-700 exhibited a lower overpotential η₁₀ of 300 mV in basic medium (OER) and 150 mV in acidic medium (HER), as well as a lower Tafel slope of 69 mV/dec (OER) and 181 mV/dec (HER), indicating 30% lower energy requirement for overall water splitting. Gas chromatography was used to examine the electrolyzed products.

Phytic Acid-Based FeCo Bimetallic Metal-Organic Gels for Electrocatalytic Oxygen Evolution Reaction

Electrocatalysts have been developed to improve the efficiency of gas release for oxygen evolution reaction (OER), and finding a simple and efficient method for efficient electrocatalysts has inspired research enthusiasm. Herein, we report bimetallic metal-organic gels derived from phytic acid (PA) and mixed transition metal ions to explore their performance in electrocatalytic oxygen evolution reaction. PA is a natural phosphorus-rich organic compound, which can be obtained from plant seeds and grains. PA reacts with bimetallic ions (Fe³⁺ and Co²⁺ ) in a facile one-pot synthesis under mild conditions to form PA-FeCo bimetallic gels, and the corresponding aerogels are further partially reduced with NaBH₄ to improve the electrocatalytic activity. Mixed valence states of Fe(II)/Fe(III) and Co(III)/Co(II) are present in the materials. Excellent OER performance in terms of overpotential (257 mV at 20 mA cm^-2 ) and Tafel slope (36 mV dec^-1 ) is achieved in an alkaline electrolyte. This reduction method is superior to the pyrolysis method by well maintaining the gel morphology structure. This strategy is conducive to the further improvement of the performance of metal-organic electrocatalysts, and provides guidance for the subsequent application of metal-organic gel electrocatalysts.

Ternary Zn1-xNixSe nanostructures as efficient photocatalysts for detoxification of hazardous Congo red, methyl orange, and chrome yellow dyes in wastewater sources

Water contamination by hazardous organic pollutants poses an extreme threat to the environment and globally endangers aquatic life and human health. Hence, the removal of toxic organic effluents from water sources is necessary to ensure a healthy green environment. To this end, a new class of emerging, visible-light-driven Zn- and Ni-based ternary metal-selenide (Zn_1-xNi_xSe) nanophotocatalysts, with tunable nanostructures via regulation of the stoichiometric ratios of Zn and Ni, were synthesized for efficient water purification by a facile one-pot hydrothermal process. These catalysts exhibit outstanding porous properties, with large surface areas and average particle sizes of around 80 ± 10 nm. The as-prepared ternary Zn_1-xNi_xSe catalysts enable improved optical properties, intrinsic conductivity, bandgap reductions, and large numbers of active sites compared with pristine materials, thereby exhibiting outstanding degradation properties against various dye molecules, including Congo red, methyl orange, and chrome-IV upon visible light irradiation. The improved photodegradation capabilities of the Zn_1-xNi_xSe catalysts may be attributed to the synergistic combinations of Zn and Ni selenides, which in turn minimize the recombination rates of the photogenerated carriers compared to their individual constituents. These findings clearly demonstrate that the proposed ternary Zn_1-xNi_xSe catalysts could be potentially used to remove toxic organic contaminants from industrial wastewater.

Enhanced electrocatalytic activity of PtRu/nitrogen and sulphur co-doped crumbled graphene in acid and alkaline media

The low mass activity and high price of pure platinum (Pt)-based catalysts predominantly limit their large-scale utilization in electrocatalysis. Therefore, the reduction of Pt amount while preserving the electrocatalytic efficiency represents a viable alternative. In this work, we prepared new PtRu₂ nanoparticles supported on sulphur and nitrogen co-doped crumbled graphene with trace amounts of iron (PtRu₂/PF) electrocatalysts. The PtRu₂/PF catalysts exhibited enhanced electrocatalytic performance and stability for the hydrogen evolution reaction (HER) at pH = 0. Moreover, the prepared PtRu₂/PF electrocatalyst displayed higher HER activity than commercial 20% Pt/C. The PtRu₂/PF catalyst achieved a current density of 10 mA cm^-2 at an overpotential value of only 22 mV for HER, performing better activity than many other Pt-based electrocatalysts. Besides, the PtRu₂/PF revealed a good performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline media. The PtRu₂/PF catalyst recorded a current density of 10 mA cm^-2 at an overpotential of only 270 mV for OER in KOH (1.0 M) solution and an onset potential of 0.96 V vs. RHE (at 1 mA cm^-2) for ORR in KOH (0.1 M) solution.

Designed assembly of Ni/MAX (Ti3AlC2) and porous graphene-based asymmetric electrodes for capacitive deionization of multivalent ions

The contamination of aquatic ecosystems by fluoride and heavy metal ions constitute an environmental hazard and has been proven to be harmful to human health. This study explores the feasibility of using asymmetric capacitive deionization (CDI) electrodes to remove such toxic ions from wastewater. An asymmetric CDI cell was fabricated using 2D Ni/MAX as an anode and 3D porous reduced graphene oxide (pRGO) as a cathode for the electrosorption of F^-, Pb²⁺, and As(III) ions. A simple microwave process was used for the synthesis of Ni/MAX composite using fish sperm DNA (f-DNA) as a cross-linker between MAX nanosheets (NSs) and the metallic Ni nanoparticles (NPs). Further, pRGO anode was prepared through effective reduction of RGO using lemon juice as green reducing agent with the assist of f-DNA as a structure-directing agent for the formation of 3D network. With this tailored nanoarchitecture, pRGO and Ni/MAX electrodes exhibited a high specific capacitance of 760 and 385 F g^-1, respectively. The fabricated Ni/MAX and pRGO based CDI system demonstrated a high electrosorption capacity of 68, 76, and 51 mg g^-1 for the monovalent F^-, divalent Pb²⁺, and trivalent As(III) ions at 1.4 V in neutral pH. Furthermore, Ni/MAX//pRGO system was successfully applied for the removal of total F(T), Pb(T), and As(T) ions from real industrial wastewater and contaminated groundwater. The present findings indicate that the fabricated Ni/MAX//pRGO electrode has excellent electrochemical properties that can be exploited for the removal of anionic and cationic metal ions from aqueous solutions in a CDI based system.

Optimization of N doping in TiO2 nanotubes for the enhanced solar light mediated photocatalytic H2 production and dye degradation

Herein, we report the optimization of nitrogen (N) doping in TiO₂ nanotubes to achieve the enhanced photocatalytic efficiencies in degradation of dye and H₂ gas evolution under solar light exposure. TiO₂ nanotubes have been produced via hydrothermal process and N doping has been tuned by varying the concentration of urea, being the source for N, by solid-state dispersion process. The structural analysis using XRD showed the characteristic occupancy of N into the structure of TiO₂ and the XPS studies showed the existence of Ti-N-Ti network in the N-doped TiO₂ nanotubes. The obtained TEM images showed the formation of 1D tube-like structure of TiO₂. Diffuse reflectance UV-Vis absorption spectra demonstrated that the N-doped TiO₂ nanotubes can efficiently absorb the photons of UV-Vis light of the solar light. The optimized N-doped TiO₂ nanotubes (TiO₂ nanotubes vs urea @ 1:1 ratio) showed the highest degradation efficiency over methyl orange dye (∼91% in 90 min) and showed the highest rate of H₂ evolution (∼19,848 μmol h^-1.g^-1) under solar light irradiation. Further, the recyclability studies indicated the excellent stability of the photocatalyst for the durable use in both the photocatalytic processes. The observed efficiency was ascribed to the optimized doping of N-atoms into the lattices of TiO₂, which enhanced the optical properties by forming new energy levels of N atoms near the valence band maximum of TiO₂, thereby increased the overall charge separation and recombination resistance in the system. The improved reusability of photocatalyst is attributed to the doping-induced structural stability in N-doped TiO₂. From the observed results, it has been recognized that the established strategy could be promising for synthesizing N-doped TiO₂ nanotubes with favorable structural, optical and photocatalytic properties towards dye degradation and hydrogen production applications.

Cobalt disulfide supported on porous carbon foam as a high performance hydrogen evolution reaction catalyst

An excellent cobalt disulfide–carbon foam composite catalyst was synthesized by a hydrothermal method for the electrochemical hydrogen evolution reaction (HER).

Efficient recovery of palladium nanoparticles from industrial wastewater and their catalytic activity toward reduction of 4-nitrophenol

Discharge of heavy metals from various sources of industrial wastewater poses significant environmental and health concerns. Thus, efficient recovery of precious metals from wastewater employing sustainable, rapid, and cost-effective treatment methods is highly desirable. In this work, palladium nanoparticles (Pd NPs) were successfully recovered from industrial wastewater using a pulsed laser process in the absence of additives or reducing agents. Notably, the developed approach is faster and more environmentally friendly than other conventional recovery methods. The recovered Pd NPs were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and inductively coupled plasma optical emission spectroscopy (ICP-OES). Various pulsed laser parameters (i.e., laser wavelength, power, and irradiation time) were optimized to obtain ideal conditions for the pulsed laser ablation process. Effective recovery of the Pd metal from industrial wastewater was achieved at a laser wavelength of 355 nm, power of 40 mJ/pulse, and irradiation time of 30 min. The Pd NPs exhibited excellent catalytic activity toward the reduction of 4-nitrophenol. Thus, the recovered materials showed remarkable potential for application in degradation of toxic aromatic nitro compounds in the environment.

Boosting oxygen evolution through phase and electronic modulation of highly dispersed tungsten carbide with nickel doping

Exploring efficient, stable, and earth-abundant electrocatalysts for oxygen evolution reaction (OER) is of great significance for clean and renewable energy conversion technologies. In this work, in situ uniform Ni-doped tungsten carbide (Ni/WC_X) nanoparticles (~3 nm) on carbon nanofibers (Ni/WC_X-CNFs) that were to function as efficient OER catalysts were developed. Both the composition and electronic state of tungsten carbide (WC_X: W-WC-W₂C) could be regulated through varied Ni coupling. Owing to the synergistic effect between Ni and WC_X, the reaction kinetics were facilitated, resulting in improved OER activity with low overpotentials of η₁₀ = 350 mV (modified glassy carbon electrode) and η₁₀ = 335 mV (self-supporting electrode). This work opens a facile territory for the development of cost-effective and highly promising OER electrocatalysts for use in real life applications.

Does power ultrasound (26 kHz) affect the hydrogen evolution reaction (HER) on Pt polycrystalline electrode in a mild acidic electrolyte?

In this study, we investigated the effects of power ultrasound (26 kHz, up to ∼75 W/cm², up to 100% acoustic amplitude, ultrasonic horn) on the hydrogen evolution reaction (HER) on a platinum (Pt) polycrystalline disc electrode in 0.5 M H₂SO₄ by cyclic and linear sweep voltammetry at 298 K. We also studied the formation of molecular hydrogen (H₂) bubbles on a Pt wire in the absence and presence of power ultrasound using ultra-fast camera imaging. It was found that ultrasound significantly increases currents towards the HER i.e. a ∼250% increase in current density was achieved at maximum ultrasonic power. The potential at a current density of -10 mA/cm² under silent conditions was found to be -46 mV and decreased to -27 mV at 100% acoustic amplitude i.e. a ΔE shift of ∼+20 mV, indicating the influence of ultrasound on improving the HER activity. A nearly 100% increase in the exchange current density (j_o) and a 30% decrease in the Tafel slope (b) at maximum ultrasonic power, was observed in the low overpotential region, although in the high overpotential region, the Tafel slopes (b) were not significantly affected when compared to silent conditions. In our conditions, ultrasound did not greatly affect the "real" surface area (A_r) and roughness factor (R) i.e. the microscopic surface area available for electron transfer. Overall, it was found that ultrasound did not dramatically change the mechanism of HER but instead, increased currents at the Pt surface area through effective hydrogen bubble removal.

Electronic structural regulation of CoP nanorods by the tunable incorporation of oxygen for enhanced electrocatalytic activity during the hydrogen evolution reaction

The exploration of cost-effective and highly efficient electrocatalysts for the hydrogen evolution reaction (HER) is of great significance for realizing sustainable H₂ production. As previously proposed, anion incorporation in promising earth-abundant transition metal-based electrocatalysts could be a reasonable and competitive approach to regulate the electronic structure with optimized atomic hydrogen adsorption and desorption for enhanced intrinsic electrocatalytic performance during the HER. Herein, we present the rational design and fabrication of O-incorporated CoP (expressed as O-CoP) nanorods with a controllable component and electronic structure. As demonstrated, when the lattice-incorporated O is at an appropriate concentration, the engineered O-CoP nanocatalysts have more active sites exposed with an increased number of electrochemically active areas and better electron/ion conductivity, leading to boosted HER activity and running stability. Typically, the obtained O-CoP nanorods with an optimal oxygen content exhibit excellent HER activity with an overpotential of 116 mV at a current density of 10 mA cm^-2 and a small Tafel slope of 59 mV dec^-1 in alkaline media. This anion doping strategy may make a widespread contribution to the efficient engineering of electrocatalysts for energy conversion devices.

One pot solvent assisted syntheses of Ag3SbS3 nanocrystals and exploring their phase dependent electrochemical behavior toward oxygen reduction reaction and visible light induced methanol oxidation reaction

A huge variety of silver based ternary sulfide semiconductors (SCs) have been considered for the sustainable advancement of renewable energy sources. Herein, we have synthesized two important classes of newly emerging semiconductor nanocrystals (NCs) Ag3SbS3 (SAS), i.e. hexagonal and monoclinic by simply tuning the solvent polarity, of which the second one has been synthesized in a phase pure NC for the first time by the thermal decomposition of silver and antimony based dithiocarbamate (∼N-CS2-M) complexes. Interestingly, these two systems exhibit two different semiconducting (SC) properties and band gaps; hexagonal SAS has a p type (Eg ∼ 1.65 eV) whereas monoclinic SAS has an n type (Eg ∼ 2.1 eV) character. For the first time ever we have designed a reducing working electrode (i.e. cathode) by modifying the rotating disc electrode (RDE) with hexagonal SAS that exhibits excellent electrochemical oxygen reduction reaction (ORR) activity (Eonset = 1.09 V vs. RHE and average number of electron transfer: 3.89) comparable to that of the highly expensive Pt/C (Eonset = 0.88 V vs. RHE and average number of electron transfer: 3.92). Density functional theory (DFT) investigation confirms the corroborations of experimental data with theoretical implications. In addition, the electrode fabricated from monoclinic SAS acts as an efficient photoanode which exhibits higher photoelectrochemical (PEC) methanol oxidation reaction (MOR) activity under illumination in alkaline medium compared to that of standard TiO2 grown on an indium tin oxide (ITO) coated glass slide. On illumination, the relative photocurrent density at the onset potential has been obtained to be 845 which is a very significant experimental output with respect to any other TiO2 or Pt@TiO2 based photocatalysts for this application. The physicochemical stability and reusability of both materials were supported by 50 hours of extended electrochemical chronoamperometric measurements and powder XRD and the TEM analyses after electrocatalysis. This study explores a possible pathway for designing simple and less expensive but catalytically efficient silver based ternary sulfide NC systems for developing an SC material to reduce the energy crisis in the near future.

Sonoelectrochemistry for energy and environmental applications

Sonoelectrochemistry is the study of the effects and applications of ultrasonic waves on electrochemical processes. The integration of ultrasound and electrochemistry offers many advantages: fast reaction rates, enhanced surface activation, and increased mass transport at an electrode. Significant progress has been made in advancing basic and applied aspects of sonoelectrochemical techniques, which are herein reviewed by addressing the development and applications of sonoelectrochemical processes in energy and environmental areas. This review examines the experimental procedures that are used in various sonoelectrochemical techniques generally used for the synthesis of energy related materials (e.g., fuel cell electrocatalysts and materials for hydrogen production) and for the degradation of various organic compounds/pollutants. The challenges that remain for the sonoelectrochemical production of energy materials, the degradation of organic pollutants, and their associated reaction pathway mechanism(s) are also discussed. This review also highlights the significant improvements made to date. The provided information in this review may be helpful to scientists working in the research areas of environmental remediation, energy exploitation and exploration, as well as synthetic process-oriented research.

Facile synthesis of Nafion-supported Pt nanoparticles with ultra-low loading as a high-performance electrocatalyst for hydrogen evolution reaction

x%Pt-Naf-CV (Pt-Nafion-Cyclic Voltammetry) catalysts with homogeneously distributed platinum nanoparticles and ultra-low Pt loading are successfully synthesized by using a facile potential cycling approach. The as-synthesized 0.8%Pt-Naf-CV catalyst exhibits an enhanced electrocatalytic activity for hydrogen evolution reaction (HER) in 0.5 M H₂SO₄ solution, which obtains a low overpotential of 34 mV at 10 mA cm^-2. The linear sweep voltammetry (LSV) curve of 0.8%Pt-Naf-CV catalyst is almost consistent with that of commercial Pt/C. However, the 0.8%Pt-Naf-CV catalyst displays a more excellent stability and durability in comparison with commercial Pt/C. Besides, the Pt loading of Pt/C (Pt-10 wt%) is about 10 times that of 0.8%Pt-Naf-CV catalyst. The improved electrocatalytic performances are derived from the synergistic effects of Pt and Nafion. The Nafion plays a significant role as a dispersant, carrier and structure directing agent on the morphology and size of the Pt catalyst. This result contributes a promising method to enhance the catalytic activity and reduce the amount of Pt.