Bipolar Blue Host Emitter with Unity Quantum Yield Allows Full Exciton Radiation in Single-Emissive-Layer Hybrid White Organic Light-Emitting Diodes

A through-space charge transfer pyrene-based fluorophore with anti-quenching behavior for deep-blue organic light-emitting devices

A through-space charge transfer pyrene-based fluorophore has been developed for organic light-emitting devices (OLEDs). This material exhibits deep-blue fluorescence, bipolar characteristics, and anti-quenching behavior in the solid state. It proves to be an effective emitter for both doped and nondoped deep-blue OLEDs.

Synthesis of 2-(Trifluoromethyl)-[1,2,4]triazolo[5,1-a]isoquinoline via Cycloaddition of C,N-Cyclic Azomethine Imine with CF3CN

A [3 + 2] cycloaddition of C,N-cyclic azomethine imine with in situ-generated CF3CN for the construction of 2-(trifluoromethyl)-[1,2,4]triazolo[5,1-a]isoquinoline is reported. Remarkably, this process shows a broad substrate scope with excellent functional group tolerance, which is scalable and enables a practical route to a library of 2-(trifluoromethyl)-[1,2,4]triazolo[5,1-a]isoquinoline derivatives in moderate to good yields.

Lanthanide complexes with d-f transition: new emitters for single-emitting-layer white organic light-emitting diodes

White organic light-emitting diodes (WOLEDs) is a new generation of lighting technology and has stimulated wide-ranging studies. Despite the advantage of simple device structure, single-emitting-layer WOLEDs (SEL-WOLEDs) still face the challenges of difficult material screening and fine energy level regulation. Herein, we report efficient SEL-WOLEDs with a sky-blue emitting cerium(III) complex Ce-TBO^2Et and an orange-red emitting europium(II) complex Eu(Tp^2Et)₂ as the emitters, showing a maximum external quantum efficiency of 15.9% and Commission Internationale de l'Eclairage coordinates of (0.33, 0.39) at various luminances. Most importantly, the electroluminescence mechanism of direct hole capture and hindered energy transfer between the two emitters facilitate a manageable weight doping concentration of 5% for Eu(Tp^2Et)₂, avoiding the low concentration (<1%) of the low-energy emitter in typical SEL-WOLEDs. Our results indicate that d-f transition emitters may circumvent fine energy level regulation and provide development potential for SEL-WOLEDs.

Benzoxazole-Based Hybridized Local and Charge-Transfer Deep-Blue Emitters for Solution-Processable Organic Light-Emitting Diodes and the In fluences of Hexahydrophthalimido

Hybridized local and charge-transfer (HLCT) emitters have attracted extensive attention, but the insolubility and severe self-aggregation tendency restrict their applications in solution-processable organic light-emitting diodes (OLEDs), particularly deep-blue OLEDs. Herein, two novel benzoxazole-based solution-processable HLCT emitters (BPCP and BPCPCHY) are designed and synthesized, in which benzoxazole acts as an acceptor, carbazole acts as a donor, and hexahydrophthalimido (HP, with a large intramolecular torsion angle and spatial distortion characteristics) acts as a bulky modified end-group with weak electron-withdrawing effects. Both BPCP and BPCPCHY exhibit HLCT characteristics and emit near ultraviolet in toluene at 404 and 399 nm. Compared to the BPCP, the BPCPCHY solid shows much better thermal stability (T_g, 187 vs 110 °C), higher oscillator strengths of the S₁-to-S₀ transition (0.5346 vs 0.4809), and faster k_r (1.1 × 10⁸ vs 7.5 × 10⁷ s^-1) and thus a much higher Φ_PL in the neat film. The introduction of HP groups greatly suppresses the intra-/intermolecular charge-transfer effect and self-aggregation trends, and the BPCPCHY neat films placed in air for 3 months can still maintain an excellent amorphous morphology. The solution-processable deep-blue OLEDs utilizing BPCP and BPCPCHY achieved a CIE_y of 0.06 with maximum external quantum efficiency (EQE_max) values of 7.19 and 8.53%, respectively, which are among the best results of the solution-processable deep-blue OLEDs based on the "hot exciton" mechanism. All of the above results indicate that benzoxazole is an excellent acceptor for constructing deep-blue HLCT materials, and the strategy of introducing HP as a modified end-group into an HLCT emitter provides a new perspective to develop solution-processable efficient deep-blue OLEDs with high morphological stability.

Highly efficient and nearly roll-off-free electrofluorescent devices via multiple sensitizations

The efficiency roll-off at high luminance has hindered the wide application of organic light-emitting diodes (OLEDs) for decades. To circumvent this issue, both high exciton utilization and short exciton residence should be satisfied, which, however, faces formidable challenges. Here, we propose an advanced approach of phosphor-assisted thermally activated delayed fluorophor (TADF)-sensitized fluorescence, abbreviated as TPSF. It is proved to be a rational strategy that can realize high quantum efficiency and elaborately accelerated radiative exciton consumption simultaneously by breaking singlet-triplet spin-flip cycles on a TADF host via multiple sensitizations. On the basis of a TADF molecule exhibiting anti-accumulation-caused quenching character, a proof-of-concept device exhibits a maximum external quantum efficiency (EQE_max) of 24.2% with an ultrahigh L_90% (the luminance at which EQE drops to 90% of its maximum value) of 190,500 cd m^-2 and a greatly improved operational stability, unlocking the full potential of OLEDs for ultrahigh-luminance applications.

Understanding High Fluorescence Quantum Yield and Simultaneous Large Stokes Shift in Phenyl Bridged Donor-π-Acceptor Dyads with Varied Bridge Lengths in Polar Solvents

Photophysical properties of electron donor-π-acceptor (D-π-A) dyads for a given pair of D and A highly depend on the π-bridge type and length and also on the solvent polarity. In this work, first-principles calculations with optimally tuned range-separated hybrids are implemented to explore and understand the optical absorption and emission properties of recently synthesized novel D-π-A dyads with 1,2-diphenylphenanthroimidazole (PPI) as D and 1,2,4-triazolopyridine (TP) as A with varied phenyl π-bridge lengths (denoted as PPI-P_n-TP, n = 0-2 considered here) in solvents of different dielectrics. All three D-π-A dyads display almost an unaltered low-lying optical peak position and a red-shifted emission with increasing solvent polarity, corroborating well with the reported experimental observations. The observed emission shift was attributed to the stabilization of an intramolecular charge-transfer (ICT) state by the polar solvent. Contrastingly, our calculations reveal no ICT; rather the shift is essentially originated from the substantial excited-state relaxation involving primarily rotation of the PPI phenyl ring directly linked to the π-bridge, leading to an almost planarized emissive state. Further, the greater frontier molecular orbital delocalization-driven high fluorescence rate together with increased structural rigidity of the emissive state rationalize the observed high fluorescence quantum yield. The present research findings not only are helpful to better understand the reported experimental observations but also show routes to molecularly design functional D-π-A molecules for advanced optoelectronic, sensing, and biomedical applications.

Optimizing Intermolecular Interactions and Energy Level Alignments of Red TADF Emitters for High-Performance Organic Light-Emitting Diodes

Adequately harvesting all excitons in a single molecule and inhibiting exciton losses caused by intermolecular interactions are two important factors for achieving high efficiencies thermally activated delayed fluorescence (TADF). One potential approach for optimizing these is to tune alignment of various excited state energy levels by using different doping concentrations. Unfortunately, emission efficiencies of most TADF emitters decrease rapidly with concentrations which limits the window for energy level tunning. In this work, by introducing a spiro group to increase steric hindrance of a TADF emitter (BPPXZ) with a phenoxazine and a dibenzo[a,c]phenazine, emission efficiency of the resulting molecule (BPSPXZ) is much less affected by concentration increase. This enables exploitation of the concentration effects to tune energy levels of its excited states for obtaining simultaneously small singlet-triplet energy offset and large spin-orbital coupling, leading to high-efficiency reverse intersystem crossing. With these merits, organic light-emitting diodes (OLEDs) using the BPSPXZ emitter from 5 to 60 wt% doping can all deliver EQE of over 20%. More importantly, record-high EQEs of 33.4% and 15.8% are respectively achieved in the optimized and nondoped conditions. This work proposes a strategy for developing red TADF emitters by optimizing the intermolecular interaction and energy level alignments to facilitate exciton utilization over wide doping concentrations.

Cu(II)-Catalyzed C-H Amidation/Cyclization of Azomethine Imines with Dioxazolones via Acyl Nitrenes: A Direct Access to Diverse 1,2,4-Triazole Derivatives

We report a Cu(II)-catalyzed C-H amidation/cyclization of azomethine imines with dioxazolones as acyl nitrene transfer reagents under additive- and ligand-free conditions. An array of 1,2,4-triazolo[1,5-a]pyridine derivatives were afforded in moderate to good yields with excellent functional group tolerance. In addition, scale-up reaction and photoluminescence properties were discussed.

Multifunctional Materials Serving as Efficient Non-Doped Violet-Blue Emitters and Host Materials for Phosphorescence

Efficient multifunctional materials acting as violet-blue emitters, as well as host materials for phosphorescent OLEDs, are crucial but rare due to demand that they should have high first singlet state (S₁ ) energy and first triplet state (T₁ ) energy simultaneously. In this study, two new violet-blue bipolar fluorophores, TPA-PI-SBF and SBF-PI-SBF, were designed and synthesized by introducing the hole transporting moiety triphenylamine (TPA) and spirobifluorene (SBF) unit that has high T₁ into high deep blue emission quantum yield group phenanthroimidazole (PI). As the results, the non-doped OLEDs based on TPA-PI-SBF exhibited excellent EL performance with a maximum external quantum efficiency (EQE_max ) of 6.76 % and a violet-blue emission with Commission Internationale de L'Eclairage (CIE) of (0.152, 0.059). The device based on SBF-PI-SBF displayed EQE_max of 6.19 % with CIE of (0.159, 0.049), which nearly matches the CIE coordinates of the violet-blue emitters standard of (0.131, 0.046). These EL performances are comparable to the best reported non-doped deep or violet-blue emissive OLEDs with CIEy<0.06 in recent years. Additionally, the green, yellow and red phosphorescent OLEDs with TPA-PI-SBF and SBF-PI-SBF as host materials achieved a high EQE_max of about 20 % and low efficiency roll-off at the ultra-high luminance of 10 000 cd m^-2 . These results provided a new construction strategy for designing high-performance violet-blue emitters, as well as efficient host materials for phosphorescent OLEDs.

Room-Temperature Stable Noncovalent Charge-Transfer Dianion Biradical to Produce Singlet Oxygen by Visible or Near-Infrared Light Photoexcitation

Noncovalent interaction between small molecules can generate a charge-transfer (CT) state, achieving the effect of a conjugated large molecule as well as a transition-metal complex. Herein, we demonstrate a room-temperature stable dianion biradical conveniently produced by noncovalent intermolecular CT interaction between anthraquinone (AQ) and potassium tert-butoxide (KOtBu). Essentially, CT from KOtBu to AQ boosts absorption bands from the UV to visible and near-infrared (NIR) range, enabling AQ-KOtBu to have new absorption bands around 400, 550, and 900 nm. The absorption bands of AQ-KOtBu are dramatically enhanced after blue-to-green or NIR light excitation. Interestingly, both ground state AQ-KOtBu (C₍₁₎) and photoexcited AQ-KOtBu (C₍₂₎) are quenched by oxygen to produce singlet oxygen. Furthermore, C₍₁₎ can be photoactivated by purged nitrogen in solution, and C₍₂₎ can be regenerated after the photoexcitation and purged nitrogen in solution, which may serve as a photosensitizer under visible and NIR light excitation.

Disentangling Multiple Effects on Excited-State Intramolecular Charge Transfer among Asymmetrical Tripartite PPI-TPA/PCz Triads

By utilizing the bipolarity of 1,2-diphenylphenanthroimidazole (PPI), two types of asymmetrical tripartite triads (PPI-TPA and PPI-PCz) were designed with triphenylamine (TPA) and 9-phenylcarbazole (PCz). These triads are deep-blue luminescent materials with a high fluorescence quantum yield of nearly 100 %. To trace the photophysical behaviors of these triads, their excited-state evolution channels and interchromophoric interactions were investigated by ultrafast time-resolved transient absorption and excited-state theoretical calculations. The results suggest that the electronic nature, asymmetrical tripartite structure, and electron-hole distance of these triads, as well as solvent polarity, determine the lifetime of intramolecular charge transfer (ICT). Interestingly, PPI-PCz triads show anti-Kasha ICT, and the charge-transfer direction among the triads is adjustable. For the PPI-TPA triad, the electron is transferred from TPA to PPI, whereas for the PPI-PCz triad the electron is pushed from PPI to PCz. Exploration of the excited-state ICT in these triads may pave the way to design better luminescent materials in the future.

Single-Molecular White-Light Emitters and Their Potential WOLED Applications

White organic light-emitting diodes (WOLEDs) are superior to traditional incandescent light bulbs and compact fluorescent lamps in terms of their merits in ensuring pure white-light emission, low-energy consumption, large-area thin-film fabrication, etc. Unfortunately, WOLEDs based on multilayered or multicomponent (red, green, and blue (RGB)) emissive layers can suffer from some remarkable disadvantages, such as intricate device fabrication and voltage-dependent emission color, etc. Single molecules, which can emit white light, can be used to replace multiple emitters, leading to a simplified fabrication process, stable and reproducible WOLEDs. Recently, the performance of WOLEDs by using single molecules is catching up with that of the state-of-the-art devices fabricated by multicomponent emitters. Therefore, an increasing attention has been paid on single white-light-emitting materials for efficient WOLEDs. In this review, different mechanisms of white-light emission from a single molecule and the performance of single-molecule-based WOLEDs are collected and expounded, hoping to light up the interesting subject on single-molecule white-light-emitting materials, which have great potential as white-light emitters for illumination and lighting applications in the world.

Efficient fluorescent OLEDS based on assistant acceptor modulated HLCT emissive state for enhancing singlet exciton utilization

Phenylamine phenanthroimidazole based bipolar compounds with donor-acceptor (D-A) architecture namely, 4-(1-(2,3-dihydrobenzo[b][1,4]dioxin-5-yl)-6,9-di(pyren-4-yl)-1H-phenanthro[9,10-d]imidazol-2-yl)-N,N-diphenylaniline (DDPPPA) and 4'-(1-(2,3-dihydrobenzo[b][1,4]dioxin-5-yl)-6,9-di(pyren-4-yl)-1H-phenanthro[9,10-d]imidazol-2-yl)-N,N-diphenyl-[1,1'-biphenyl]-4-amine (DDPBA) have been synthesized with highly fluorescent pyrene moieties at C6- and C9-positions. The C6 and C9 modification enhanced the thermal, photochemical and electroluminescent properties. Both molecules were employed as blue emitters in non doped organic light emitting devices (OLEDs) and show high performances due to hybridized local and charge-transfer properties. An OLED with DDPPPA/DDPBA emissive layer shows deep-blue emission with maximum external quantum efficiency (η ex), current efficiency (η c) and power efficiency (η p) of 5.7/6.0%, 10.5/12.0 cd A-1 and 8.3/9.2 lm W-1, respectively. Both devices show high singlet exciton utilizing efficiency (η s) of DDPPPA-31.33% and DDPBA-35.29%. The doped device m-MTDATA:DDPPPA/m-MTDATA:DDPBA shows maximum efficiencies of η c -7.4/8.23 cd A-1; η p -5.8/6.13 lm W-1; η ex -4.72/5.63% (5 wt%):η c -8.36/9.15 cd A-1; η p -6.32/6.65 lm W-1; η ex -4.86/5.45% (10 wt%):η c -9.58/10.02 cd A-1; η p -7.8/8.25 lm W-1; η ex -5.96/6.25% (20 wt%). The doped device based on TAPC host TAPC:DDPPPA/TAPC:DDPBA exhibits maximum efficiencies of η c -9.60/10.03 cd A-1; η p -7.81/8.26 lm W-1; η ex -5.96/6.25% (20 wt%).

High-quality warm white organic electroluminescence from efficient phosphor-only emitting systems based on bipolar iridium(iii) complexes

Warm white organic light-emitting diodes (WOLEDs) based on efficient phosphor-only emitting systems exhibit very high peak electroluminescence (EL) efficiencies of 25.0/22.5% and 71.3/59.3 lm W⁻¹ and desirable color rendering index (CRI) of 81/90.

Asymmetrically twisted phenanthrimidazole derivatives as host materials for blue fluorescent, green and red phosphorescent OLEDs

The electroluminescent properties of asymmetrically twisted phenanthrimidazole derivatives comprised of fluorescent anthracene or pyrene unit namely, 1-(1-(anthracen-10-yl)naphthalen-4-yl)-2-styryl-1H-phenanthro[9,10-d]imidazole (ANSPI), 1-(1-(pyren-1-yl) naphthalene-4-yl)-2-styryl-1H-phenanthro[9,10-d]imidazole (PNSPI), 4-(2-(4-(anthracen-9-yl) styryl)-1H-phenanthro[9,10-d]imidazol-1-yl)naphthalene-1-carbonitrile (ASPINC) and 4-(2-(4-(pyren-1-yl)styryl)-1H-phenanthro[9,10-d]imidazol-1-yl)naphthalene-1-carbonitrile (PSPINC) for blue OLEDs have been analyzed. The asymmetrically twisted conformation interrupt π-conjugation effectively results in deep-blue emission. The pyrene containing PSPINC based non-doped blue device (476 nm) shows maximium efficiencies (current efficiency (ηc)-4.23 cd/A; power efficiency (ηp)-2.86 lm/W; external quantum efficiency (ηex)-3.48%: CIE (0.16, 0.17) at 3.10 V. Among the doped blue devices, An(PPI)2:ASPINC shows high efficiencies (ηc-12.13 cd/A; ηp-5.98 lm/W; ηex-6.79%; L-23986 cd m-2; EL-458 nm) at 3.15 V with CIE (0.15, 0.17) than An(PPI)2:PSPINC based device which is inconsistent with non-doped device performances. The green and red PhOLEDs show higher efficiencies with Ir(ppy)3: ASPINC (ηc-50.6 cd/A; ηp-53.4 lm/W; ηex-17.0%; L-61581 cd m-2; EL-501 nm, CIE (0.31, 0.60) at 3.32 V and (bt)2Ir(dipba): ASPINC (ηc-15.2 cd/A; ηp-16.5 lm/W; ηex-14.5%; L-13456 cd m-2; EL-610 nm), CIE (0.63, 0.36) at 3.20 V, respectively. The complete energy transfer between the host and dopant molecules improved the efficiency of PHOLEDs.

Nondoped Red Fluorophores with Hybridized Local and Charge-Transfer State for High-Performance Fluorescent White Organic Light-Emitting Diodes

Two red fluorophores (TPABTPA and TPABCHO) with hybridized local and charge-transfer properties were systematically studied. TPABTPA and TPABCHO enabled nondoped organic light-emitting diodes (OLEDs) with excellent external quantum efficiency (EQE) of 11.1% and 5.0%, respectively, attributed to high exciton utilization efficiency of 82% and 46%, respectively. Furthermore, TPABTPA and TPABCHO were utilized as complementary emitters for a sky-blue thermally activated delayed fluorescence material to fabricate two-color fluorescent white OLEDs (WOLEDs) in a fully nondoped emissive-layer configuration. Furthermore, device performance was optimized through a simple device engineering strategy by sandwiching a suitable interlayer between the emitting layers. As a result, the optimized TPABTPA- and TPABCHO-based WOLEDs successfully achieved high EQEs of 23.0% and 8.6%, respectively, along with a low efficiency roll-off and good spectral stability, due to high exciton utilization efficiency of the emitters and importantly efficient suppression of a nonradiative energy-transfer process.