Pt-Decorated Boron Nitride Nanosheets as Artificial Nanozyme for Detection of Dopamine

A smartphone sensing colorimetric detection of ascorbic acid in fruit samples based on Cu2Fe(CN)6@PVP nanozyme

Prussian blue analogue nanozymes (PBANZs) have been widely employed in the colorimetric detection of various organic small molecules due to their peroxidase-like activity. However, the practical applications of PBANZ are limited by its narrow operating pH range, insufficient catalytic activity, and poor stability. In this study, we synthesized a novel Cu2Fe(CN)6@PVP PBA nanozyme (Cu-PBANZ) using polyvinylpyrrolidone (PVP) as a capping ligand. This novel Cu-PBANZ not only exhibited enhanced peroxidase-like activity and improved stability under near-neutral conditions but also demonstrated higher sensitivity and a broader linear range in the detection of hydrogen peroxide (20-4000 μM, LOD 5 μM) and ascorbic acid (10-2000 μM, LOD 3.9 μM). Besides, a smartphone-based platform was developed for detecting AA content in fruits, achieving a detection limit of 7.8 μM. Both UV-Vis spectrophotometry and smartphone-based colorimetry were validated with recovery rates of 95.1 %-106.7 % and 94.8 %-108.9 %, respectively. This study proposed a promising biosensor incorporating Cu-PBANZ for rapid colorimetric detection of AA in fruits using a smartphone.

Uric acid detection via dual-mode mechanism with copper-coordinated nitrogen-doped carbon dots as peroxidase mimics

Monitoring disease-related biomarkers, such as uric acid in human body fluids, is essential for effective disease management and clinical diagnosis. In this study, copper-coordinated nitrogen-doped carbon dots (Cu@N-CDs) were synthesized via a simple hydrothermal method, achieving a remarkable photoluminescence quantum yield of 44.69%. The Cu@N-CDs emitted fluorescence at 460 nm upon excitation at 360 nm, making them highly suitable for sensitive biosensing applications. For uric acid detection, a Cu@N-CDs-based probe was developed and coupled with phenol (ph-OH) and 4-aminoantipyrine (AP-NH2). In the presence of hydrogen peroxide (H2O2), generated through the enzymatic breakdown of uric acid by uricase, ph-OH and AP-NH2 reacted to form a pink-colored compound. This compound quenched the fluorescence emission of Cu@N-CDs via an inner-filter effect, enabling fluorometric detection. Additionally, for colorimetric detection, the pink compound was quantified by measuring absorbance at 510 nm. The detection strategy utilized the peroxidase-mimetic activity of Cu@N-CDs, which was further enhanced by the presence of Cu. Under optimized conditions, the fluorometric method demonstrated a linear detection range of 0.01-700 μM, while the colorimetric method showed a range of 0.07-700 μM for uric acid. The developed approach proved highly effective in detecting uric acid in human blood serum and urine samples, yielding accurate results with acceptable recovery rates. This dual-mode detection method offers a reliable, sensitive, and cost-effective tool for monitoring uric acid levels, marking a significant advancement in clinical diagnostics and personalized healthcare.

Nanozyme-Enabled Biomedical Diagnosis: Advances, Trends, and Challenges

As nanoscale materials with the function of catalyzing substrates through enzymatic kinetics, nanozymes are regarded as potential alternatives to natural enzymes. Compared to protein-based enzymes, nanozymes exhibit attractive characteristics of low preparation cost, robust activity, flexible performance adjustment, and versatile functionalization. These advantages endow them with wide use from biochemical sensing and environmental remediation to medical theranostics. Especially in biomedical diagnosis, the feature of catalytic signal amplification provided by nanozymes makes them function as emerging labels for the detection of biomarkers and diseases, with rapid developments observed in recent years. To provide a comprehensive overview of recent progress made in this dynamic field, here an overview of biomedical diagnosis enabled by nanozymes is provided. This review first summarizes the synthesis of nanozyme materials and then discusses the main strategies applied to enhance their catalytic activity and specificity. Subsequently, representative utilization of nanozymes combined with biological elements in disease diagnosis is reviewed, including the detection of biomarkers related to metabolic, cardiovascular, nervous, and digestive diseases as well as cancers. Finally, some development trends in nanozyme-enabled biomedical diagnosis are highlighted, and corresponding challenges are also pointed out, aiming to inspire future efforts to further advance this promising field.

Revolutionizing nanozymes: The synthesis, enzyme-mimicking capabilities of carbon dots, and advancements in catalytic mechanisms

Nanozymes, a revolutionary category of engineered artificial enzymes based on nanomaterials, have been developed to overcome the inherent limitations of natural enzymes, such as the high cost associated with storage and their fragility. Carbon dots (CDs) have emerged as compelling candidates for various applications due to their versatile properties. Particularly noteworthy are CDs with a range of surface functional groups that exhibit enzyme-like behavior, combining exceptional performance with catalytic capabilities. This review explores the methodologies used for synthesizing CDs with enzyme mimicking capabilities, highlighting potential avenues such as doping and hybrid nanozymes to enhance their catalytic efficacy. Moreover, a comprehensive overview of CDs that mimick the activities of various oxidoreductases-like peroxidase, catalase, oxidase/laccase, and superoxide dismutase-like is provided. The focus is on the in-depth exploration of the mechanisms, advancements and practical applications of each oxidoreductase-like function exhibited by CD nanozymes. Drawing upon these exhaustive summaries and analyses, the review identifies the prevailing challenges that hinder the seamless integration of CDs into real-world applications and offers forward-looking perspectives for future directions.

Advances in nanozymes with peroxidase-like activity for biosensing and disease therapy applications

Natural enzymes are crucial in biological systems and widely used in biomedicine, but their disadvantages, such as insufficient stability and high cost, have limited their widespread application. Since discovering the enzyme-like activity of Fe3O4 nanoparticles, extensive research progress in diverse nanozymes has been made with their in-depth investigation, resulting in rapid development of related nanotechnologies. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower costs. Among them, peroxidase (POD)-like nanozymes have attracted extensive attention in biomedical applications owing to their efficient catalytic performance and diverse structures. This review explores different types of nanozymes with POD-like activity and discusses their activity regulation, particularly emphasizing their latest development trends and advances in biosensing and disease treatment. Finally, the challenges and prospects for the development of POD-like nanozymes and their potential future applications in the biomedical field are also provided.

Colorimetric Detection of Dopamine Based on Peroxidase-like Activity of β-CD Functionalized AuNPs

Catalytically active nanomaterials, or nanozymes, have gained significant attention as alternatives to natural enzymes due to their low cost, ease of preparation, and enhanced stability. Because of easy preparation, excellent biocompatibility, and unique optoelectronic properties, gold nanoparticles (AuNPs) have attracted increasing attention in many fields, including nanozymes. In this work, we demonstrated the applicability of beta-cyclodextrin functionalized gold nanoparticles (β-CD-AuNPs) as enzyme mimics for different substances, including TMB and DA. We found that β-CD-AuNPs can catalyze the H2O2-mediated oxidation of DA. The dopamine signal-off sensor was developed by taking advantage of the peroxidase-like activity of β-CD-AuNPs towards TMB and DA, where both 3,3',5,5'-tetramethylbenzidine (TMB) and dopamine (DA) may compete for the binding sites with β-CD-AuNPs. As a result, the presence of dopamine can be detected even through the naked eye (up to the concentration of 3.75 µM) and using a spectrophotometer (up to the concentration of 1.0 µM) by monitoring the disappearance of the blue color of the oxidized form of TMB in the presence of dopamine. Furthermore, no obvious disappearance of color was observed at lower concentrations of interferences including ascorbic and uric acid. Given the versatility of cyclodextrin to host large numbers of analyte molecules, we envision that a similar principle can be applied for the detection of other analyte molecules of biological, medical, and environmental significance.

Nanozyme-catalyzed and zwitterion-modified swabs based for the detection of Listeria monocytogenes in complex matrices

In recent years, nanozymes have been widely used in the field of biosensing and food safety testing due to their advantages of low cost, high stability, easy modification and adjustable catalytic activity. However, how to reduce the signal interference generated by reducing substances, macromolecules and colored substances in the food matrix in nanozymes-based colorimetric sensing is still a major challenge. In this paper, using Listeria monocytogenes as a model analyte, sodium sulfonyl methacrylate (SBMA) polymers were modified onto cotton swabs by photothermal polymerization and combined with Listeria monocytogenes-specific aptamer (Apt1) to prepare swabs that can specifically capture and isolate Listeria monocytogenes from complex matrices (SBMA/Apt1 cotton swab). In addition, in combination with the inhibitory effect of the aptamer (Apt2) on the oxidase activity of Mn3O4 NPs, a colorimetric biosensor based on nanozymes that can quantitatively, sensitively, and specifically identify Listeria monocytogenes in food products was constructed. The results showed that the colorimetric signal of the method was linear with the concentration of Listeria monocytogenes in the range of 2.83-2.83 × 105 CFU/mL, and the limit of detection was 2.64 CFU/mL, which can be used for the detection of Listeria monocytogenes in complex environments and food samples.

Nanozyme-Based Pump-free Microfluidic Chip for Colorectal Cancer Diagnosis via Circulating Cancer Stem Cell Detection

Circulating cancer stem cells (CCSCs) are subpopulations of cancer cells with high tumorigenicity, chemoresistance, and metastatic potential, which are also major drivers of disease progression. Herein, to achieve the prediction of tumor diagnosis and progression in colorectal cancer (CRC), a new, automated, and portable lateral displacement patterned pump-free (LP) microfluidic chip (LP-chip) with the CoPt3 nanozyme was established for CCSC capture and detection in peripheral blood and feces samples ex vivo. In this design, CoPt3@HA probes with functions of magnetic separation and colorimetric signal transduction by peroxidase-mimicking activity were applied for the capture of CCSCs and signal output in clinical samples. The generated colors of polydopamine (PDA) were quantifiable through the smartphone APP and visualizable by the naked eye in the test line (T line) and control line (C line) of the LP-chip. In the optimal experimental conditions, the CCSC concentration was sensitive to change in the range 0-105 cells mL-1, with a detection limit of 3 cells mL-1 (S/N = 3). Preliminary studies of clinical samples suggest that the platform has the potential for prediction of colorectal cancer progression and poor prognosis. Overall, the LP-chip provides potential strategies for timely diagnosis, therapeutic monitoring, and recurrence prediction to improve home-based patient care.

Nano-architectonics of Pt single-atoms and differently-sized nanoparticles supported by manganese-oxide nanosheets and impact on catalytic and anti-biofilm activities

Hybrid-nanozymes are promising in various applications, but comprehensive comparison of hybrid-nanozymes composed of single-atoms or nanoparticles on the same support has never been made. Here, manganese-oxide nanosheets were loaded with Pt-single-atoms or differently-sized nanoparticles and their oxidase- and-peroxidase activities compared. High-resolution Transmission-Electron-Microscopy and corresponding Fast Fourier Transform imaging showed that Pt-nanoparticles (1.5 nm diameter) had no clear (111) crystal-planes, while larger nanoparticles had clear (111) crystal-planes. X-ray Photo-electron Spectroscopy demonstrated that unloaded nanosheets were composed of MnO2 with a high number of oxygen vacancies (Vo/Mn 0.4). Loading with 7.0 nm Pt-nanoparticles induced a change to Mn2O3, while loading with 1.5 nm nanoparticles increased the number of vacancies (Vo/Mn 1.2). Nanosheets loaded with 3.0 nm Pt-nanoparticles possessed similarly high catalytic activities as Pt-single-atoms. However, loading with 1.5 nm or 7.0 nm Pt-nanoparticles yielded lower catalytic activities. A model is proposed explaining the low catalytic activity of under- and over-sized Pt-nanoparticles as compared with intermediately-sized (3.0 nm) Pt-nanoparticles and single-atoms. Herewith, catalytic activities of hybrid-nanozymes composed of single-atoms and intermediately-sized nanoparticles are put a par, as confirmed here with respect to bacterial biofilm eradication. This conclusion facilitates a balanced choice between using Pt-single-atoms or nanoparticles in further development and application of hybrid-nanozymes.

Au@Pt nanoparticles-based signal-enhanced lateral flow immunoassay for ultrasensitive naked-eye detection of SARS-CoV-2

With SARS-CoV-2 N protein as a model target, a signal-enhanced LFIA based on Au@Pt nanoparticles (NPs) as labels is proposed. This Au@Pt NPs combined the distinguished localized surface plasma resonance (LSPR) effect of Au NPs and the ultrahigh peroxidase-like catalytic activity of Pt NPs. Au@Pt NPs could trigger substrate chromogenic reaction, generating a color signal orders of magnitude darker than their intrinsic color. In the detection, after the coloration of the strips, 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2 were added, and a dark blue chelate (OxTMB) was produced soon, enhancing the band color significantly. After the signal amplification, the naked-eye detection limit for N protein reached 40 pg/mL. The detection sensitivity enhanced more than 1000 times than that without signal amplification. Compared with mainstream LFIA requiring complex readout instruments, the Au@Pt-based LFIA achieved a comparable sensitivity using naked eyes detection. This point is crucial, especially for unprofessional users or low-resource areas. Hence, this signal-enhanced LFIA may serve as a sensitive, cost-effective, and user-friendly detection method. It can shorten the testing window period and help identify early infections.

Engineering a two-dimensional metal-carbon nanozyme-based portable paper-based colorimetric chip for onsite and visual analysis of pyrophosphate

Sensitive and accurate analysis of pyrophosphate (PPi) is of great importance for preventing health hazard in environment. Nevertheless, most of sensors focus on sensitivity and selectivity, but practicality is also a significant quota. How to reconciling sensitivity, selectivity and practicability in one single sensor is desirable but remains challenging. Here, we created a novel metal-carbon nanozyme V2O5@C with two-dimensional (2D) morphology and high yet exclusive peroxidase (POD)-like activity via a glucose and NH4NO4-co-directed avenue, and further showed its application in constructing a portable and disposable paper-based analytical chip (PA-chip) for rapid, visual and onsite analysis of PPi. PPi etched V2O5 to prevent the decomposition of H2O2 into ·OH, resulting in weakened POD-like activity. In comparison with PPi deficiency, colorless TMB couldn't be oxidized into oxidized TMB with a dropped absorption at 652 nm. Therefore, obviously shallowed blue color on PA-chip surface was recorded, and demonstrated a negative relationship with PPi dosage, enabling rapid and visual detection of PPi with a limit of detection of 2.6 nM. This study demonstrated the burgeoning applications of nanozymes with POD-like activity in construction of PA-chips for PPi and will quicken the advancement of practical sensors, guaranteeing environmental safety.

Selective and Comparative Study of B/nZVCu-Fe and B/nZVCu-Zn Nanoparticles as Fluorescent Probe for Dopamine in Presence of its Interference Molecules

This work focuses on the synthesis of Bentonite supported nano zero valent bimetallic nanoparticles (B/nZVCu-M NPs) to be utilized for fast and highly sensitive, reversible, fluorescent determination of dopamine (DA) in the presence of dopamine, other biomolecules and ions. The X-ray Photoelectron Spectroscopy(XPS), Powder X-Ray Diffraction(PXRD) and Scanning Electron Microscopy(SEM) revealed the formation of nanoparticles with size ranging from 15 to 20 nm. The composition was revealed by Fourier Transform Infrared(FTIR) Spectoscopy and Energy Dispersive X-Ray (EDX) Analysis. The Limits of Detection(LOD) were noted to be 5.57nM and 6.07nM. The binding of DA is noted to be reversible with respect to EDTA2-. Furthermore, the developed sensor exhibited good repeatability, satisfactory long-term stability, and was successfully used for the selective detection of dopamine sample with desired recoveries or reversibilities. The main aim of our work is to selectively detect dopamine in presence of its major interferents and biomolecules that are normally present/ co-exist with dopamine in biological systems.

Tunable Structured 2D Nanobiocatalysts: Synthesis, Catalytic Properties and New Horizons in Biomedical Applications

2D materials have offered essential contributions to boosting biocatalytic efficiency in diverse biomedical applications due to the intrinsic enzyme-mimetic activity and massive specific surface area for loading metal catalytic centers. Since the difficulty of high-quality synthesis, the varied structure, and the tough choice of efficient surface loading sites with catalytic properties, the artificial building of 2D nanobiocatalysts still faces great challenges. Here, in this review, a timely and comprehensive summarization of the latest progress and future trends in the design and biotherapeutic applications of 2D nanobiocatalysts is provided, which is essential for their development. First, an overview of the synthesis-structure-fundamentals and structure-property relationships of 2D nanobiocatalysts, both metal-free and metal-based is provided. After that, the effective design of the active sites of nanobiocatalysts is discussed. Then, the progress of their applied research in recent years, including biomedical analysis, biomedical therapeutics, pharmacokinetics, and toxicology is systematically highlighted. Finally, future research directions of 2D nanobiocatalysts are prospected. Overall, this review to provide cutting-edge and multidisciplinary guidance for accelerating future developments and biomedical applications of 2D nanobiocatalysts is expected.

Bovine Serum Albumin Template-Mediated Fabrication of Ruthenium Dioxide/Multiwalled Carbon Nanotubes: High-Performance Electrochemical Dopamine Biosensing in Human Serum

The presence of abnormal dopamine (DA) levels may cause serious neurological disorders, therefore, the quantitative analysis of DA and its related research are of great significance for ensuring health. Herein, the bovine serum albumin (BSA) template method has been proposed for the preparation of catalytically high-performance ruthenium dioxide/multiwalled carbon nanotube (RuO2/MWCNT) nanocomposites. The incorporation of MWCNTs has improved the active surface area and conductivity while effectively preventing the aggregation of RuO2 nanoparticles. The outstanding electrocatalytic performance of RuO2/MWCNTs has promoted the electro-oxidation of DA at neutral pH. The electrochemical sensing platform based on RuO2/MWCNTs has demonstrated a wide linear range (0.5 to 111.1 μM), low detection limit (0.167 μM), excellent selectivity, long-term stability, and good reproducibility for DA detection. The satisfactory recovery range of 94.7% to 103% exhibited by the proposed sensing podium in serum samples signifies its potential for analytical applications. The aforementioned results reveal that RuO2/MWCNT nanostructures hold promising aptitude in the electrochemical sensor to detect DA in real samples, further offering broad prospects in clinical and medical diagnosis.

Hexagonal Boron Nitride Quantum Dots Embedded on Layer-by-Layer Films for Peroxidase-Assisted Colorimetric Detection of β-Galactosidase Producing Pathogens

Pathogen detection has become a major research area all over the world for water quality surveillance and microbial risk assessment. Therefore, designing simple and sensitive detection kits plays a key role in envisaging and evaluating the risk of disease outbreaks and providing quality healthcare settings. Herein, we have designed a facile and low-cost colorimetric sensing strategy for the selective and sensitive determination of β-galactosidase producing pathogens. The hexagonal boron nitride quantum dots (h-BN QDs) were established as a nanozyme that showed prominent peroxidase-like activity, which catalyzes 3,3',5,5'-tetramethylbenzidine (TMB) oxidation by H2O2. The h-BN QDs were embedded on a layer-by-layer assembled agarose biopolymer. The β-galactosidase enzyme partially degrades β-1,4 glycosidic bonds of agarose polymer, resulting in accessibility of h-BN QDs on the solid surface. This assay can be conveniently conducted and analyzed by monitoring the blue color formation due to TMB oxidation within 30 min. The nanocomposite was stable for more than 90 days and was showing TMB oxidation after incubating it with Escherichia coli (E. coli). The limit of detection was calculated to be 1.8 × 106 and 1.5 × 106 CFU/mL for E. coli and Klebsiella pneumonia (K. pneumonia), respectively. Furthermore, this novel sensing approach is an attractive platform that was successfully applied to detect E. coli in spiked water samples and other food products with good accuracy, indicating its practical applicability for the detection of pathogens in real samples.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Cascaded nanozyme-based high-throughput microfluidic device integrating with glucometer and smartphone for point-of-care pheochromocytoma diagnosis

The development of point-of-care (POC) diagnostics devices for circulating tumor cells (CTCs) detection plays an important role in the early diagnosis of pheochromocytoma (PCC), especially in a low-resource setting. To further realize the rapid, portable, and high-throughput detection of CTCs, an Au@CuMOF cascade enzyme-based microfluidic device for instant point-of-care detection of CTCs was constructed by combining a smartphone application and a commercial portable glucose meter (PGM). In this microfluidic system, DOTA and norepinephrine (NE) modified Au@CuMOF signal probes and Fe3O4@SiO2 capture probes were used for the dual recognition and capture of rare PCC-CTCs. Then, the targeted binding of the Au@CuMOF cascade nanozymes to the CTCs endowed the cellular complexes with multienzyme mimetic activities (i.e., glucose oxidase-like and peroxidase-like activity) to catalyze glucose reduction as signal output for colorimetric and personal glucose meter (PGM) dual-mode detection of CTCs. The developed method has a linear range of 4 to 105 cells mL-1 and a detection limit of 3 cells mL-1. This method allows the simultaneous detection of six samples and demonstrates good applicability for CTCs detection in whole blood samples. More importantly, the combination of PGM, smartphone app and array microfluidic chips enables the rapid, portable, and high-throughput diagnoses of PCC, and providing provide a convenient and reliable alternative to traditional liquid biopsy diagnosis of various cancers.

Rational design of nanozyme with integrated sample pretreatment for colorimetric biosensing

Nanozymes have been widely used in the field of biosensing owing to their high stability, low cost, adjustable catalytic activity, and convenient modification. However, achieving high selectivity and sensitivity simultaneously in nanozyme-based colorimetric sensing remains a major challenge. Nanozymes are nanomaterials with enzyme-simulating activity that are often used as solid-phase adsorbents for sample pretreatment. Our design strategy integrated sample pretreatment function into the nanozyme through separation and enrichment, thereby improving the selectivity and sensitivity of nanozyme-based colorimetric biosensing. As a proof-of-concept, glucose was used as the model analyte in this study. A phenylboric acid-modified magnetic nanozyme (Cu/Fe3O4@BA) was rationally designed and synthesized. Selectivity was enhanced by boronate-affinity specific adsorption and the elimination of interference after magnetic separation. In addition, magnetic solid-phase extraction enrichment was used to improve the sensitivity. A recovery rate of more than 80% was reached when the enrichment factor was 50. The synthesized magnetic Cu/Fe3O4@BA was recyclable at least five times. The proposed method exhibited excellent selectivity and sensitivity, simple operation, and recyclability, providing a novel and practical strategy for designing multifunctional nanozymes for biosensing.

Nanozyme-based sensing of dopamine using cobalt-doped hydroxyapatite nanocomposite from waste bones

Dopamine is one of the most important neurotransmitters and plays a crucial role in various neurological, renal, and cardiovascular systems. However, the abnormal levels of dopamine mainly point to Parkinson's, Alzheimer's, cardiovascular diseases, etc. Hydroxyapatite (HAp), owing to its catalytic nature, nanoporous structure, easy synthesis, and biocompatibility, is a promising matrix material. These characteristics make HAp a material of choice for doping metals such as cobalt. The synthesized cobalt-doped hydroxyapatite (Co-HAp) was used as a colorimetric sensing platform for dopamine. The successful synthesis of the platform was confirmed by characterization with FTIR, SEM, EDX, XRD, TGA, etc. The platform demonstrated intrinsic peroxidase-like activity in the presence of H2O2, resulting in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The proposed sensor detected dopamine in a linear range of 0.9-35 μM, a limit of detection of 0.51 µM, limit of quantification of 1.7 µM, and an R2 of 0.993. The optimization of the proposed sensor was done with different parameters, such as the amount of mimic enzyme, H2O2, pH, TMB concentration, and time. The proposed sensor showed the best response at 5 mg of the mimic enzyme, pH 5, 12 mM TMB, and 8 mM H2O2, with a short response time of only 2 min. The fabricated platform was successfully applied to detect dopamine in physiological solutions.

Ag-Cu filled nanonets with ultrafine dual-nanozyme active units for neurotransmitter biosensing

Ag and Cu based nanostructures serve as advanced functional materials for biomedical applications, due to their unique properties. Here, we proposed a novel neurotransmitter biosensing method based on Ag-Cu composite nanozyme, synthesized through the soft film plate method. Supported by the soft film template, the Ag-Cu nanozymes were stably kept to an ultrafine 2D structure with high monodispersity, which provided a large specific surface area and sufficient binding sites, leading to controllable and improved dual-nanozyme activities over similar-sized mono-Ag and mono-Cu, and up to 4.95 times of natural enzyme-level. The multi-path enzymatic reaction processes catalyzed by Ag-Cu composite nanozymes were firstly theoretically discussed in detail, according to the theoretical redox potential of redox couples in the reaction systems. On this basis, the Ag-Cu filled nanonets based neurotransmitter biosensing is successfully applied in rapid detection for glutathione and dopamine, possessing a linear range of 10∼100 μM and 1-10 μM, and a detection limit of 3.01 μM and 0.29 μM, respectively, which exhibited superior performance for biomedical purposes over most commercially available products in speed and precision.

Diagnosis of Mycobacterium tuberculosis using palladium-platinum bimetallic nanoparticles combined with paper-based analytical devices

In this study, we demonstrate that palladium-platinum bimetallic nanoparticles (Pd@Pt NPs) as the nanozyme, combined with a multi-layer paper-based analytical device and DNA hybridization, can successfully detect Mycobacterium tuberculosis. This nanozyme has peroxidase-like properties, which can increase the oxidation rate of the substrate. Compared with horseradish peroxidase, which is widely used in traditional detection, the Michaelis constants of Pd@Pt NPs are fourteen and seventeen times lower than those for 3,3',5,5'-tetramethylbenzidine and H2O2, respectively. To verify the catalytic efficiency of Pd@Pt NPs, this study will execute molecular diagnosis of Mycobacterium tuberculosis. We chose the IS6110 fragment as the target DNA and divided the complementary sequences into the capture DNA and reporter DNA. They were modified on paper and Pd@Pt NPs, respectively, to detect Mycobacterium tuberculosis on a paper-based analytical device. With the above-mentioned method, we can detect target DNA within 15 minutes with a linear range between 0.75 and 10 nM, and a detection limit of 0.216 nM. These results demonstrate that the proposed platform (a DNA-nanozyme integrated paper-based analytical device, dnPAD) can provide sensitive and on-site infection prognosis in areas with insufficient medical resources.

Galvanic replacement synthesis of PtPdAu hollow nanorods as peroxidase mimic with high specific activity for colorimetric detection

Noble metal nanomaterials have been widely demonstrated to possess intrinsic enzyme-like properties and have been increasingly applied in the fields of analysis and biomedicine. However, current exploration of high-activity noble metal nanozymes is still far from adequate. The construction of hollow structures and adjustment of their elemental composition are effective ways to improve the specific activity (SA) of nanozymes. In this study, trimetallic PtPdAu hollow nanorods (HNRs) were developed using a galvanic replacement reaction and Kirkendall effect. The catalytic experiment showed that the PtPdAu HNRs possessed outstanding peroxidase-like performance and their SA value was up to 563.71 U mg-1, which is remarkable among various previously reported nanozymes and higher than that of monometallic or bimetallic counterparts with similar structure and size prepared in this study. Electron paramagnetic resonance (EPR)measurements showed that the PtPdAu HNRs could contribute to the formation of hydroxyl radicals (˙OH) in catalyzing hydrogen peroxide. When using PtPdAu HNRs as a nanozyme in the colorimetric detection of H2O2 and ascorbic acid (AA), the limits of detection were as low as 1.8 μM and 0.068 μM, respectively. This study demonstrates that PtPdAu HNRs are high-activity nanozymes and have the potential to be applied in the field of analysis.

Multienzyme-Like Nanozymes: Regulation, Rational Design, and Application

Nanomaterials with more than one enzyme-like activity are termed multienzymic nanozymes, and they have received increasing attention in recent years and hold huge potential to be applied in diverse fields, especially for biosensing and therapeutics. Compared to single enzyme-like nanozymes, multienzymic nanozymes offer various unique advantages, including synergistic effects, cascaded reactions, and environmentally responsive selectivity. Nevertheless, along with these merits, the catalytic mechanism and rational design of multienzymic nanozymes are more complicated and elusive as compared to single-enzymic nanozymes. In this review, the multienzymic nanozymes classification scheme based on the numbers/types of activities, the internal and external factors regulating the multienzymatic activities, the rational design based on chemical, biomimetic, and computer-aided strategies, and recent progress in applications attributed to the advantages of multicatalytic activities are systematically discussed. Finally, current challenges and future perspectives regarding the development and application of multienzymatic nanozymes are suggested. This review aims to deepen the understanding and inspire the research in multienzymic nanozymes to a greater extent.

Carbon dot enhanced peroxidase-like activity of platinum nanozymes

As one of the most intriguing nanozymes, the platinum (Pt) nanozyme has attracted tremendous research interest due to its various catalytic activities but its application is still limited by its poor colloidal stability and low affinity to substrates. Here, we design a highly stable Pt@carbon dot (Pt@CD) hybrid nanozyme with enhanced peroxidase (POD)-like activity (specific activity of 1877 U mg-1). The Pt@CDs catalyze the decomposition of hydrogen peroxide (H2O2) to produce singlet oxygen and hydroxyl radicals and exhibit high affinity to H2O2 and high specificity to 3,3',5,5'-tetramethyl-benzidine. We reveal that both the hydroxyl and carbonyl groups of CDs could coordinate with Pt2+ and then regulate the charge state of the Pt nanozyme, facilitating the formation of Pt@CDs and improving the POD-like activity of Pt@CDs. Colorimetric detection assays based on Pt@CDs for H2O2, dopamine, and glucose with a satisfactory detection performance are achieved. Moreover, the Pt@CDs show a H2O2-involving antibacterial effect by destroying the cell membrane. Our findings provide new opportunities for designing hybrid nanozymes with desirable stability and catalytic performance by using CDs as nucleating templates and stabilizers.

Photoenhanced intrinsic peroxidase-like activity of a metal-free biocompatible borophene photonanozyme for colorimetric sensor assay of dopamine biomolecule

Photonanozymes are novel enzyme-mimicking nanomaterials with light-harvesting capacity and have widespread applications in many areas including biosensing, biomedicine, environmental applications, energy, etc. Herein, we introduce freestanding metal-free biocompitable borophene nanosheets (BNSs) exhibiting excellent photoresponsive peroxidase-like activity for biosensing applications. The photo-enhanced peroxidase-like activity of BNSs photonanozyme was indicated to be due to its band gap energy being comparable to the energy of visible light.

Utility of structural engineering on the monitoring of acrolein by aluminum nitride nano tube

CONTEXT

The study delves into the adsorption process of acrolein (AC) onto both an untainted and a titanium-doped aluminum nitride nanotube (AlNNT) using computations based on density functional theory. As AC approaches the pure AlNNT, it exhibits a calculated adsorption energy (Ead) of -5.3 kcal/mol, underscoring the feeble nature of the adsorption. Furthermore, there has been very little change to the AlNNT's natural electrical characteristics. On the contrary, the introduction of titanium (Ti) enhances the performance of AlNNT, rendering it more susceptible and reactive to AC signals. Analyzing the conventional Gibbs free energy of formation computationally, we ascertain that replacing a nitrogen (N) atom with a titanium (Ti) atom within the aluminum nitride nanotube (AlNNT) structure presents a more advantageous prospect. Notably, there is a substantial alteration in the energy of adsorption (Ead) for AC as a Ti atom is incorporated onto the AlNNT surface, resulting in a shift from -5.3 to -24.6 kcal/mol.

METHODS

Energy calculations and geometric optimizations were conducted utilizing the dispersion-augmented B3LYP method, known as B3LYP-D. In this approach, Grimme's dispersion term, referred to as the "D" term, was employed to account for dispersion forces. The basis set adopted was 6-31 +  + G** (d), and all computational procedures were executed using the GAMESS software program. Following the incorporation of titanium (Ti), this adjustment leads to a substantial enhancement in sensing capability, reaching a value of 93.7. This indicates an improved electrical conductivity of the aluminum nitride nanotube (AlNNT). Remarkably, the Ti-doped AlNNT demonstrates the ability to detect AC distinctly, even in the presence of HCN, formaldehyde, ethanol, toluene, and acetone. The swift recovery process becomes evident as AC desorbs from the surface of Ti-doped AlNNT, with a calculated recovery time of 14.0 s.

Peroxidase activity of a Cu-Fe bimetallic hydrogel and applications for colorimetric detection of ascorbic acid

A Cu-Fe bimetallic hydrogel (2-QF-CuFe-G) was constructed through a simple method. The 2-QF-CuFe-G metallohydrogel possesses excellent peroxidase-like activity to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2. The catalytic mechanism was confirmed by the addition of •OH radical scavenger isopropyl alcohol (IPA), tert-butyl alcohol (TBA) and ˙OH trapping agent terephthalic acid (TA). Remarkably, the resultant blue ox-TMB system can be used to selectively and sensitively detect ascorbic acid (AA) with an LOD of 0.93 μM in the range of 4-36 μM through the colorimetric method. Moreover, the assay based on the 2-QF-CuFe-G metallohydrogel can be successfully applied to detect AA in fresh fruits.

Recent advances in the colorimetric and fluorescence analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials

Nanomaterials with enzyme-like activity have been widely used in the construction of colorimetric and fluorescence sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. Furthermore, the colorimetric and fluorescence sensors, which are effective approaches for detecting bioactive small-molecule compounds, have been extensively explored due to their simple operation and high sensitivity. Recent significant researches have focused on designing various sensors based on nanozymes with peroxidase- and oxidase-like activity for the colorimetric and fluorescence analysis of different analytes. In this review, recent developments (from 2018 to present) in the colorimetric and fluorescent analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials were summarized. In addition, the challenges and design strategies in developing colorimetric and fluorescent assays with high performance and specific sensing were discussed.

Secondary metal doped cuprous-cyanoimidazole frameworks for triple-mode detection of dopamine

BACKGROUNDS

Metal-organic framework-based nanozymes enable several opportunities for designing novel analysis methods for the detection of pesticides, heavy metal ions, and biomolecules; however, practical applications are still limited by a complicated synthesis route, lower catalytic activity, and single detection mode. Dopamine (DA) is a crucial catecholamine substance in the human body that acts as a neurotransmitter regulating a variety of physiological functions of the central nervous system. Therefore, it is highly significant to explore simple nanozymes synthesis methods for constructing a multiple analysis system to detection DA.

RESULTS

Herein, we elaborately selected cobalt ions as the secondary metal doping in cuprous-cyanoimidazole frameworks (CuCo-CIFs) with a mass-production strategy. CuCo-CIFs possess intrinsic peroxidase-like activity that can convert hydrogen peroxide into various reactive oxygen species (i.e., 1O2, OH·, O2·-) and thereby oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) and DA to blue oxTMB and orange polydopamine (PDA), respectively. The absorption of the detection system increases at 460 nm while decreases at 652 nm as the concentration of DA increases under near-neutral pH (6.1), resulting in a color transition from blue to orange. Consequently, an unprecedented triple-mode analysis system of DA monitored by naked eyes, ratiometric-absorption, and scanometric was constructed. The limit of detection for the ratiometric-absorption and scanometric mode can reach 20 nM and 28 nM, respectively. CuCo-CIFs were successfully used for the rapid and accurate detection of DA in practical samples.

SIGNIFICANCE

As a simple, low-cost, multi-mode colorimetric platform, this kind of nanozyme detection with peroxidase-like activity exhibits significant potential for the detection of DA. Our work not only expands the applications of MOFs in analytical fields but also addresses the general challenges faced by nanozyme-based colorimetric detection systems of DA. This work provides valuable insights for the rational application of nanozyme and the design of new analysis systems.

In situ green synthesis of the nanocomposites of MnO2/graphene as an oxidase mimic for sensitive colorimetric and electrochemical dual-mode biosensing

Herein we report the colorimetry and an electrochemical for the determination of dopamine (DA) by using MnO2 nanoparticles and graphene nanosheets composite (MnO2@G) that display oxidase mimicking property. MnO2@G could directly oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue product (oxTMB) without extra oxidants such as H2O2. Nevertheless, the presence of DA will inhibit the TMB oxidation due to the presence of the competitive reaction of MnO2@G and DA, giving a product color change from blue to colorless. A colorimetric assay for detect the concentration of DA was worked out according to this finding. Response is linear in the 0.1 to 15 μM DA concentration range, and the detection limit is 0.14 μM. Wider detection range is achieved in an electrochemical method which is due to the pronounced electrocatalytic activity of MnO2@G. The MnO2@G was modified on the surface of the glassy carbon electrode in order to fabricate one type electrochemical sensor. The sensor achieves a wide detection two linear ranges from 0.4 to 70 μM, with the detection limit of 1.16 μM. The detection of DA in real serum sample proved that the nanozyme based on MnO2@G could be developed into a colorimetry and electrochemical dual-readout sensing platform.

Nitrocellulose membranes in situ grown with Prussian blue nanoparticles as stable nanozyme pads for colorimetric detection of dopamine

Prussian blue (PB) is a typical peroxidase mimic with simple preparation, low cost and high eco-friendliness, but it still has drawbacks of poor stability (e.g., decomposition in aqueous dispersions) and intrinsic optical interference (e.g., high extinction coefficient over a wide wavelength range) in colorimetric assays. Herein, we used nitrocellulose (NC) membranes as synthesis hosts of PB nanoparticles (NPs) to develop a new type of three-dimensional (3D) porous nanozyme pad. By means of an in situ synthesis route, PB NPs were uniformly grown on the surfaces of the fiber scaffolds with desirable stability, which also avoided signal interference from PB NPs owing to the easy handling of the pads in a quantitative solid state. The pads showed significant peroxidase-mimicking activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with the output of colorimetric signals. Based on the reduction of oxidized TMB (oxTMB) by dopamine (DA), the pads were exploited for simple and quantitative colorimetric detection of DA with a limit of detection (LOD) of 0.59 μM and a satisfactory accuracy for analysis of real human urine samples. This is the first attempt at exploiting NC membranes as the synthesis hosts to develop nanozyme pads, which solves the above drawbacks of traditional PB-based peroxidase mimics and has promise for various colorimetric bioanalyses, given the structural benefits of NC membranes and their broad applications in biosensors.

Vancomycin-Stabilized Platinum Nanoparticles with Oxidase-like Activity for Sensitive Dopamine Detection

The development of efficient, reliable, and sensitive dopamine detection methods has attracted much attention. In this paper, vancomycin-stabilized platinum nanoparticles (Van-Ptn NPs, n = 0.5, 1, 2) were prepared by the biological template method, where n represented the molar ratio of vancomycin to Pt. The results show that Van-Pt2 NPs had oxidase-like activity and peroxidase-like activity, and the mechanism was due to the generation of reactive oxygen 1O2 and OH. Van-Pt2 NPs exhibited good temperature stability, storage stability, and salt solution stability. Furthermore, Van-Pt2 NPs had almost no cytotoxicity to A549 cells. More importantly, the colorimetric detection of DA in human serum samples was performed based on the oxidase-like activity of Van-Pt2 NPs. The linear range of DA detection was 10-700 μM, and the detection limit was 0.854 μM. This study establishes a rapid and reliable method for the detection of dopamine and extends the application of biosynthetic nanoparticles in the field of biosensing.

DNA-modulated single-atom nanozymes with enhanced enzyme-like activity for ultrasensitive detection of dopamine

Despite the current progress in optimizing and tailoring the performance of nanozymes through structural and synthetic adaptation, there is still a lack of dynamic modulation approaches to alter their catalytic activity. Here, we demonstrate that DNA can act as an auxiliary regulator via a straightforward incubation method with Fe-N-C single-atom nanozymes (SAzymes), causing a leap in the enzyme-like activity of Fe-N-C from moderate to a higher level. The DNA-assisted enhancement is attributed to the increased substrate affinity of Fe-N-C nanozymes through electrostatic attraction between the substrate and DNA. Based on the prepared DNA/Fe-N-C system, colorimetric sensors for dopamine (DA) detection were constructed. Surprisingly, the incorporation of DNA not only enabled the detection of DA in a low concentration range, but also greatly improved the sensitivity with a 436-fold decrease in detection limit. The quantitative determination of DA was achieved in two-segment linear ranges of 0.01-4 μM and 5-100 μM with an ultralow detection limit of 9.56 nM. The DNA/Fe-N-C system shows superior performance compared to the original Fe-N-C system, making it an ideal choice for nanozyme-based biosensors. This simple design approach has paved the way for enhancing nanozyme activity and is expected to serve as a general strategy for optimizing biosensor performance.

Laser Scribing Turns Plastic Waste into a Biosensor via the Restructuration of Nanocarbon Composites for Noninvasive Dopamine Detection

The development of affordable and compact noninvasive point-of-care (POC) dopamine biosensors for the next generation is currently a major and challenging problem. In this context, a highly sensitive, selective, and low-cost sensing probe is developed by a simple one-step laser-scribing process of plastic waste. A flexible POC device is developed as a prototype and shows a highly specific response to dopamine in the real sample (urine) as low as 100 pmol/L in a broad linear range of 10-10-10-4 mol/L. The 3D topological feature, carrier kinetics, and surface chemistry are found to improve with the formation of high-density metal-embedded graphene-foam composite driven by laser irradiation on the plastic-waste surface. The development of various kinds of flexible and tunable biosensors by plastic waste is now possible thanks to the success of this simple, but effective, laser-scribing technique, which is capable of modifying the matrix's electronic and chemical composition.

Peroxidase-mimicking poly-L-lysine/alginate microspheres with PtS2 nanoparticles for image-based colorimetric assays

Morphologically controllable ALG@ε-PL water-in-water microspheres were successfully prepared using a two-step method through precise control of the two-phase flow rate. Through further interfacial coagulation, the ALG@ε-PL microspheres possess a dense surface structure and good permeability. The sensor based on PtS₂@ALG@ε-PL microspheres was constructed by encapsulating PtS₂ nanosheets with peroxidase-like properties in ALG@ε-PL water-in-water microspheres. PtS₂ nanosheets catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ to produce blue oxTMB. The strong reducing property of the model analyte dopamine (DA) can reduce oxTMB, thus causing the blue color to fade and successfully achieving colorimetric detection of DA. The linear range of the assay is 2.0-200 μM, and the detection limit is 0.22 μM. The recoveries of DA in serum samples were determined by the spik method, and the results were reproducible.

Apta-sensor for selective determination of dopamine using chitosan-stabilized Prussian blue nanoparticles

Chitosan-stabilized Prussian blue nanoparticles (CS/PBNPs) were fabricated by a simple synthetic method and used to develop a novel aptamer-based colorimetric assay for selective determination of dopamine (DA). Scanning electron microscopy (SEM) images exhibited a uniform shape of the CS/PBNPs with an average diameter of 37.0 ± 3.2 nm. The CS/PBNPs exhibited strong peroxidase-like activity that catalyzed the reaction between 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H₂O₂). Chitosan was used for stabilization of the PBNPs and fixation of the DA aptamer on the surface of the CS/PBNPs. The catalytic mechanism of the CS/PBNPs was confirmed to involve first the decomposition of H₂O₂ into a hydroxyl radical (˙OH) and then oxidation of TMB by the ˙OH to produce a blue color. An aptamer-based colorimetric assay was made with the CS/PBNPs to detect DA at concentrations of 0.25-100 μM with a limit of detection (LOD) of 0.16 μM. For comparison, a gold nanoparticle (AuNP)-based apta-sensor detected DA in concentrations of 1-25 μM with a LOD of 0.55 μM. The recovery results of DA concentrations (0.25, 0.5, and 1 μM) from spiked human serum were 92.6%, 102.1%, and 103.9%, verifying the reliability and reproducibility of the CS/PBNP-based apta-sensor for determination of DA level in clinical applications. Moreover, compared to traditional immunoassay, this aptamer-based nanozyme activation/inhibition system needs no washing step, which is very useful to shorten the assay time and maintain high sensitivity.

Balancing "on" and "off" response of hydroxyl groups to a nanozyme-catalyzing system for the construction of an ultra-sensitive and selective "signal-on" detection platform for dopamine

Targeting the functional groups present in analytes by nanozyme-catalyzed systems is a promising strategy to construct sensitive and selective platforms for the sensing of specific analytes. Herein, various groups (-COOH, -CHO, -OH, and -NH₂) on benzene were introduced in an Fe-based nanozyme system with MoS₂-MIL-101(Fe) as the model peroxidase nanozyme, H₂O₂ as the oxidizing agent, and TMB as the chromogenic substrate, and the effects of these groups at both a low concentration and high concentration were further investigated. It was found that the hydroxyl group-based substance catechol showed an "on" effect at a low concentration to increase the catalytic rate and enhance the absorbance signal, whereas an "off" effect at a high concentration with a decreased absorbance signal. Based on these results, the "on" mode and "off" mode for the biological molecule dopamine, a type of catechol derivative, were proposed. In the control system, MoS₂-MIL-101(Fe) catalyzed the decomposition of H₂O₂ to produce ROS, which further oxidized TMB. In the "on" mode, the hydroxyl groups of dopamine could combine with the Fe(iii) site of the nanozyme to lower its oxidation state, resulting in higher catalytic activity. In the "off" mode, the excess dopamine could consume ROS, which inhibited the catalytic process. Under the optimal conditions, by balancing the "on" and "off" modes, the "on" mode for the detection of dopamine was found to have better sensitivity and selectivity. The LOD was as low as 0.5 nM. This detection platform was successfully applied for the detection of dopamine in human serum with satisfactory recovery. Our results can pave the way for the design of nanozyme sensing systems with sensitivity and selectivity.

Highly Active CoRh Graphitic Nanozyme for Colorimetric Sensing in Real Samples

Rh-based nanozymes show high catalytic efficiency, specific surface area, good stability, and unique physicochemical properties, while magnetic nanozymes facilitate the magnetic separation of detection samples under an external magnetic field for improved sensitivity. However, magnetic Rh nanozymes, especially those with excellent stability, have not been reported. Herein, we apply the chemical vapor deposition (CVD) method to prepare a CoRh graphitic nanozyme (termed as CoRh@G nanozyme), which structurally consists of CoRh nanoalloy encapsulated by a few layers of graphene for sensitive colorimetric sensing applications. The proposed CoRh@G nanozyme has superior peroxidase (POD)-like activity, and it shows higher affinity of the CoRh@G nanozyme than horseradish peroxidase (HRP) toward 3,3',5,5'-tetramethylbenzydine (TMB) oxidation. In addition, the CoRh@G nanozyme shows high durability and superior recyclability owing to its protective graphitic shell. The outstanding merits of the CoRh@G nanozyme allow its use for quantitative colorimetric detection of dopamine (DA) and ascorbic acid (AA), showing high sensitivity and good selectivity. Moreover, it shows satisfactory performance for AA detection in commercial beverages and energy drinks. The proposed CoRh@G nanozyme-based colorimetric sensing platform shows great promise in point-of-care (POC) visual monitoring.

Coacervate-Based Plexcitonic Assembly toward Peroxidase-like Activity and Ultrasensitive Glucose Sensing

Inbuilt catalytic centers anchored inside the confined architecture of artificial nanoreactors have gained tremendous attention owing to their vast applicability in various catalytic transformations. However, designing homogeneously distributed catalytic units with exposed surfaces in confined environment is a challenging task. Here, we have utilized quantum dot (QD)-embedded coacervate droplets (QD-Ds) as a confined compartment for the in situ synthesis of gold nanoparticles (Au NPs) without any additional reducing agent. High-resolution transmission electron microscopy images reveal homogeneous distribution of 5.6 ± 0.2 nm-sized Au NPs inside the QD-Ds (Au@QD-Ds). The in situ synthesized Au NPs are found to be stable over a period of 28 days without any agglomeration. Control experiments reveal that the free surface carboxylic acid groups of embedded QDs simultaneously act as reducing and stabilizing agents for Au NPs. Notably, these Au@QD-Ds exhibit superior peroxidase-like activity compared to bulk aqueous Au NPs and Au@QDs under similar experimental conditions. The observed peroxidase-like activity follows the classical Michaelis-Menten model inside the Au@QD-Ds via the fast electron-transfer pathway. The enhanced peroxidase-like activity has been explained by considering confinement, mass action, and the ligand-free surface of embedded Au NPs. The present plexcitonic nanocomposites exhibit excellent recyclability over several consecutive cycles without any compromise in their catalytic activity. Finally, a cascade reaction with glucose oxidase (GOx)-loaded Au@QD-Ds have been utilized for colorimetric detection of glucose with a limit of detection of 272 nM in solution as well as on filter paper. The present work highlights a facile and robust methodology for the fabrication of optically active functional hybrid plexcitonic assemblies and may find importance in various fields including bioanalytical chemistry and optoelectronics.

Yolk-shell structured nanoreactor Au@Co3O4/CeO2@mSiO2 with superior peroxidase-like activity as nanozyme for ultra-sensitive colorimetric biosensing

For yolk-shell structured nanoreactors, multiple active components can be precisely positioned on core and/or shell that can afford more exposed accessible active sites, and the internal voids can guarantee sufficient contact of reactants and catalysts. In this work, a unique yolk-shell structured nanoreactor Au@Co₃O₄/CeO₂@mSiO₂ was fabricated and applied as nanozyme for biosensing. The Au@Co₃O₄/CeO₂@mSiO₂ exhibited superior peroxidase-like activity with a lower Michaelis constant (K_m) and a higher affinity to H₂O₂. The enhanced peroxidase-like activity was attributed to the unique structure and the synergistic effects between the multiple active components. Colorimetric essays were developed based on Au@Co₃O₄/CeO₂@mSiO₂ for the ultra-sensitive sensing of glucose in the range of 3.9 nM-1.03 mM with the limit of detection as low as 3.2 nM. In the detection of glucose-6-phosphate dehydrogenase (G6PD), the cooperation between G6PD and Au@Co₃O₄/CeO₂@mSiO₂ triggered the redox cycling between NAD⁺ and NADH, thereby achieving the amplification of the signal and enhancing the sensitivity of the assay. The assay showed superior performance as compared to other methods with linear response of 5.0 × 10^-3-15 mU mL^-1 and lower detection limit of 3.6 × 10^-3 mU mL^-1. The fabricated novel multi-enzyme catalytical cascade reaction system allowed rapid and sensitive biodetection, demonstrating its potential in biosensors and biomedical applications.

Enhanced Peroxidase-Mimic Catalytic Activity via Cerium Doping of Strontium-Based Metal-Organic Frameworks with Design of a Smartphone-Based Sensor for On-Site Salivary Total Antioxidant Capacity Detection in Lung Cancer Patients

The development of artificial nanozymes with superior catalytic performance and excellent stability has been a long-standing objective for chemists. The total antioxidant capacity (TAC) is one of the most important bioanalytical measures of oxidative stress in the body. The present work aims to develop a smartphone-assisted visual detection sensor using cerium-doped strontium-based metal-organic frameworks (Ce-SrMOFs) as peroxidase-like nanozymes for the rapid, low-cost, on-site detection of TAC. The pristine SrMOF functioned as a peroxidase nanozyme, and its enzymatic activity was enhanced after doping it with Ce(IV) ions because of the multivalent nature and synergistic impact of the heteroatoms. The Ce-SrMOFs were sensitive to the single electron transfer and hydrogen atom transfer processes, which implies that the Ce-SrMOFs can serve as an ideal nanozyme candidate for TAC analysis. The investigated mechanism revealed that •OH is the most active oxygen species for the peroxidase-like activity. The Ce-SrMOFs exhibited a strong affinity for 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂, with K_m values of 0.082 and 0.427 mM, which are 5.29- and 8.67-fold lower than those of horseradish peroxidase (HRP), respectively. The Ce-SrMOFs were used for the detection of ascorbic acid, cysteine, and glutathione, with limits of detection of 44, 53, and 512 nM, respectively. The proposed method proved effective in measuring the TAC in saliva samples from lung cancer patients, thereby yielding results with satisfactory precision and accuracy.

Dual-mode strategy for 2,6-dipicolinic acid detection based on the fluorescence property and peroxidase-like activity inhibition of Fe-MIL-88NH2

This work designed a fluorometric/colorimetric dual-mode sensor for detecting 2,6-dipicolinic acid (DPA) based on the blue emission property and peroxidase-like activity of Fe-MIL-88NH₂. The fluorescence of Fe-MIL-88NH₂ was obviously turned off by Cu²⁺, but DPA was able to bring it back because it has a strong chelate bond with Cu²⁺. Fe-MIL-88NH₂ also displayed high peroxidase-like activity, which accelerated the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to the blue oxidation product (oxTMB) when H₂O₂ was present. When DPA was added, it efficiently inhibited the peroxidase-like activity of Fe-MIL-88NH₂, causing less oxTMB and less absorbance at 652 nm. The fluorescence recovery of Fe-MIL-88NH₂ and the change in absorbance at 652 nm were used as analytical signals for dual-mode detection of DPA. The linear responses in the range of 10-60 μM and 60-160 μM were achieved for the fluorometric mode, and the limit of detection (LOD) was 1.46 μM. The respective values of linear range and LOD for the colorimetric mode were 5-25 μM and 3.00 μM, respectively. In summary, the dual-mode testing strategy successfully detected DPA in aqueous environmental samples, suggesting great potential in disease prevention and environmental analysis.

Transition metal-doped germanium oxide nanozyme with enhanced enzyme-like activity for rapid detection of pesticide residues in water samples

Designing highly active nanozymes for bioanalysis and environmental sensing remains a challenge. In this study, transition metal, palladium (Pd) and iron (Fe), doped germanium oxide (GeO₂) nanozyme was designed and optimized. Compared with the pristine GeO₂ nanozyme, the transition metal doped GeO₂ nanozyme have lower Michaelis-Menten constants and higher catalytic activity, indicating that the Pd and Fe doped GeO₂ nanozyme not only enhance their affinity for the substrate but also improve its catalytic activity. In addition, a colorimetric sensor based on the GeO₂@Pd-H₂O₂-TMB system was constructed for the visual detection of simazine in water samples due to the good affinity between TMB and simazine. This sensor has good selectivity and sensitivity with a detection limit of 6.21 μM because of the highest catalytic performance of GeO₂@Pd nanozyme. This study broadens the application of nanozymes in environmental field and other nanozymes can also be enhanced in activity by simple transition metal doping.

Super-assembled mesoporous thin films with asymmetric nanofluidic channels for sensitive and reversible electrical sensing

Bioinspired artificial nanochannels have emerged as promising candidates for developing smart nanofluidic sensors due to their highly controllable size and surface functionality. However, little attention has been paid to the role of the outer surface of the nanochannels in enhancing the detection sensitivity. Herein, an asymmetric nanochannel-based responsive detection platform with ultrathin tannic acid modified mesoporous silica (TA-MS) layer and alumina oxide (AAO) thin film is prepared through super-assembly strategy. The functional TA-MS outer surface layer provides abundant phenolic groups on the nanochannels for ions and molecules transport, which paves the way for the development of heterochannels for label-free, reversible and highly sensitive dopamine (DA) detection based off of cation displacement effect. Notably, by engineering optimal thickness of the TA-MS, the sensing performance can be further improved. After optimization, the linear response ranges for DA detection are 0.001-1 μM, 1-10 μM and 10-200 μM with the detection limit of 0.1 nM. The prepared sensor exhibits stable reversibility after several detection cycles. In addition, this method was successfully applied for DA detection in fetal bovine serum sample. Theoretical calculations further prove the detection mechanism. This work opens a new horizon of using mesoporous materials to construct nanofluidic sensors for ultrasensitive small molecule detection and recognition.

Zwitterionic Sulfhydryl Sulfobetaine Stabilized Platinum Nanoparticles for Enhanced Dopamine Detection and Antitumor Ability

Herein, three kinds of molecules were used to modify the surface of platinum nanoparticles (Pt NPs) to tune their surface charge. Zwitterionic thiol-functionalized sulfobetaine (SH-SB) stabilized Pt NPs (SH-SB/Pt NPs) had the highest oxidase activity and peroxidase activity in the prepared platinum nanozymes due to the generation of reactive oxygen species. In addition, a colorimetric dopamine detection method was established based on the peroxidase activity of SH-SB/Pt NPs. This method had a wide range (0-120 μM), a low detection limit (0.244 μM), and high specificity. More importantly, SH-SB/Pt NPs displayed little hemolysis and good stability in the presence of proteins. SH-SB/Pt NPs demonstrated high cytotoxicity in vitro and good antitumor ability in vivo, which was attributed to the photothermal conversion ability of SH-SB/Pt NPs and the generation of reactive oxygen species in the acidic environment. The surface modification of nanozymes using zwitterionic molecules opens a new method to improve the catalytic activity and antitumor ability of nanozymes.

Dual-mode colorimetric and fluorescence sensing system for the detection of captopril based on Fe/NC nanozymes and carbon dots

Metal nitrogen-doped carbon (MNC) nanozymes have received increasing attention in bio-catalysis filed due to adequate catalytic activity, outstanding stability and reusability. Herein, the Fe/NC nanozymes (Fe/NC NZs) with peroxidase-like activity was successfully synthesized and a fluorescence turn on and colorimetric dual-mode sensing system was developed for quantification of captopril (CP) based on Fe/NC NZs and orange-emitting carbon dots (O-CDs). The Fe/NC NZs as an enzyme mimic can efficiently catalyze the 3,3',5,5'-tetramethylbenzidine (TMB) chromogenic reaction, forming blue-colored oxidized TMB product (oxTMB) with the presence of H₂O₂, leading to the fluorescence quenching of O-CDs simultaneously via the inner filter effect (IFE). When CP was present, the blue oxTMB was reduced to colorless TMB, resulting in the inhibition of IFE and the recovery of fluorescence of O-CDs. The fluorescence increase of O-CDs and absorbance decrease of oxTMB depended on CP concentration. Good linear relationships of fluorescence and colorimetric sensing towards CP were obtained in the range from 1 to 50 μM, and the detection limits were 0.47 and 0.56 μM, respectively. Moreover, this as-constructed dual-mode sensor was used to detect CP in pharmaceutical products with satisfactory results.