Triggering White-Light Emission in a 2D Imine Covalent Organic Framework Through Lanthanide Augmentation

White Light Emission from Luminescent Lanthanide Molecular Complex/Terbium Doped Graphene Quantum Dots/PMMA Composites

Construction of multicolor emissive PMMA composite films are reported using luminescent lanthanide Schiff-Base complexes and Terbium doped Graphene Quantum dots (GQD@Tb) for white light generation. Terbium-doped green emissive Graphene Quantum Dots are synthesized hydrothermally using ortho-phenyldiammine (OPDA), Triethylamine and Tb(NO3)3.6H2O and is thoroughly characterized by microscopic and spectroscopic techniques. Isostructural lanthanides (III) complexes [DyIII 2(L)2(NO3)2(dmf)2] (1), and [SmIII 2(L)2(NO3)2(dmf)2] (2) are isolated from an organic Schiff base ligand, H2L, ligand is prepared by 1:1 condensation of salicylaldehyde and 2-(2-Aminoethoxy)ethanol, and are characterized. The photoluminescent data analysis reveals green emission of GQD@Tb, pure blue emissive DyIIIL and red emission of SmIIIL. Additionally, intensified ligand emission attests for the blue emitter-DyIIIL complex while the "antenna effect" is witnessed for red fluorophore SmIIIL. Co-doping of metal complexes and GQD@Tb into the Poly(methyl methylacrylate) [PMMA] polymer improves luminescence intensity due to inhibition of aggregation-induced quenching. By conscientious combination of red-SmIIIL with green-GQD@Tb in a specified concentration, distinct white light is accomplished for the first time with Commission Internationale de I'Éclairage (CIE) values of 0.29, 0.32, very close to the ideal white emitter. The newly developed nano and molecular complex composite of GQD@Tb and SmIIIL-PMMA films are transparent and highly desired materials in optoelectronics, microscopy, and sensing.

Rapid fluorescent sensing through heparin and chitosan encapsulated Eu3+ complexes for pesticide detection

Vegetables and fruits are essential sources of nutrients, minerals, vitamins, and dietary fiber for a well-balanced diet. However, excessive pesticide use, particularly 2,6-dichloro-4-nitroaniline (DCN), poses serious health and environmental risks. Traditional pesticide detection methods require expensive equipment, trained personnel and making them unsuitable for on-site sensing. In this study, we synthesized europium (Eu3+) complexes incorporating heparin sodium and chitosan to develop a rapid, cost-effective, and highly sensitive fluorescent sensor for DCN detection. The optimized Eu3+ complex (ETP-HS3) demonstrated excellent water stability, strong red fluorescence, and a long fluorescence lifetime (888.09 μs). It exhibited a low limit of detection (LOD = 0.9049 μM), a rapid sensing response (20 s), and a high quenching constant (Ksv = 1.226 × 104 M-1), rendering it an effective and portable fluorescence sensor for real-time pesticide monitoring. The fluorescence quenching mechanism was thoroughly investigated, confirming the selectivity and efficiency of the sensor.

Inherited Nitrogen Distribution Control in Covalent Organic Framework Cathodes for Efficient Electrochemical Lithium Recovery via Capacitive Deionization

The economic recovery of lithium from brine generated by desalination plants presents a promising pathway toward achieving a sustainable water desalination economy. Selectively recovering Li+ ions from brine is challenging due to the presence of other dominant ions. While electrochemical separation techniques, such as hybrid capacitive deionization (HCDI), offer several advantages, success largely depends on developing suitable cathodes currently limited to inorganic materials with notable constraints. Herein, the potential of controlling heteroatom distribution within 2D covalent organic frameworks (2D-COFs) is explored for electrochemical lithium recovery. This marks the first exploration of COF cathodes for lithium extraction via HCDI. By carefully modulating the density of heteroatoms within the framework backbone, this study aims to understand their critical role better and achieve efficient cathode materials. Notably, Tta-Dfp, the representative COF, demonstrates a lithium recovery rate of 15.7 mg g⁻¹ at 1.4 V, with a Li-ion concentration of 300 mg L⁻¹, and exhibits ∼80% selectivity for lithium extraction. At the same time, the device achieves 97.7% capacitance retention after 500 charge-discharge cycles. Through controlled COFs, density functional theory (DFT) analysis, and post-electrode characterizations, we elucidate the pivotal role of nitrogen distribution in lithium recovery.

From Fundamentals to Synthesis: Covalent Organic Frameworks as Promising Materials for CO2 Adsorption

Covalent organic frameworks (COFs) are highly crystalline polymers that possess exceptional porosity and surface area, making them a subject of significant research interest. COF materials are synthesized by chemically linking organic molecules in a repetitive arrangement, creating a highly effective porous crystalline structure that adsorbs and retains gases. They are highly effective in removing impurities, such as CO2, because of their desirable characteristics, such as durability, high reactivity, stable porosity, and increased surface area. This study offers a background overview, encompassing a concise discussion of the current issue of excessive carbon emissions, and a synopsis of the materials most frequently used for CO2 collection. This review provides a detailed overview of COF materials, particularly emphasizing their synthesis methods and applications in carbon capture. It presents the latest research findings on COFs synthesized using various covalent bond formation techniques. Moreover, it discusses emerging trends and future prospects in this particular field.

Integrated Eu3+ loaded covalent organic framework with smartphone for ratiometric fluorescence detection of tetracycline

Developing rapid tetracycline sensing system is of great significance to monitor the illegal addition to drugs and pollution to food and ecosystem. By loading covalent organic frameworks (COFs) with Eu3+, a new hybridized material (COF@Eu3+) was prepared for tetracycline determination. Based on the Schiff base reaction, the COFs were by synthesized through solvent evaporation in 30 min at room temperature. Thereafter, Eu3+ was modified into COFs to develop the COF@Eu3+ sensing platform by adsorption and coordination. In presence of tetracycline, tetracycline can displace water molecules and coordinate with Eu3+ through the antenna effect. As a result, the red fluorescence of Eu3+ was enhanced by tetracycline with green fluorescence of COF as a reference. The developed ratiometric fluorescence sensor exhibits a linear range of 0.1-20 μM for detecting tetracycline with a detection limit of 30 nM. Integrated with a smartphone, the rapid tetracycline detection can be realized in situ, which is potential for high-throughput screening of tetracycline contaminated samples. Furthermore, the COF@Eu3+ fluorescence sensor has been successfully applied to the detection of tetracycline in traditional Chinese medicine compound preparation with satisfied recoveries. Therefore, a smartphone-assisted device was successfully developed based on Eu3+-functionalized COF, which is an attractive candidate for further applications of fluorescence sensing and visual detection.

Synthesis of Adhesive Polyrotaxanes Through Sequential Self-Assembly via Supramolecular Interactions and Dynamic Covalent Interactions

Self-assembly is an effective approach to construct complicated structures. Polyrotaxanes (PRs) as one of the typical polymer types with complex structure, own interlocked structures and dynamic components, in which it results in unique characteristics and functions. Currently, the synthesis of which involves covalent reactions to hinder the development of polyrotaxanes. Herein, we employed supramolecular interactions as well as dynamic covalent bonds to synthesize PRs by sequential self-assembly. First, we prepared M1 possessing two diamine structures and M2 of a bisammonium salt with two dibenzylammonium (DBA) units modified by two stoppers at its ends, then M1 and M2 self-assembled into supramolecular polymers stemming from hydrogen bonding of [N+-H ⋅ ⋅ ⋅ O] under high concentrations. After adding 2,6-pyridinedicarboxaldehyde (M3), the imine bond formation enabled the generation of macrocycles, transforming supramolecular polymers into PRs. Besides, the solution of polyrotaxanes was applied as the adhesive for diverse hard and soft materials. This strategy provides an important approach for synthesizing PRs, accelerating the advances of mechanically interlocked polymers.

Nitrogen-Rich Covalent Organic Frameworks Composited High-Temperature Proton Exchange Membranes with Ultralow Volume Expansion and Reduced Phosphoric Acid Leakage

Phosphoric acid (PA) leakage and volume expansion are critical factors limiting long-term stable operation of PA-doped polybenzimidazole (PBI) for high-temperature proton exchange membrane fuel cells. Enhancing the interaction between the polymer matrix and PA provides an effective way to minimize PA loss and inhibit excessive membrane swelling. The covalent organic frameworks (COFs) are helpful in improving the performance of PA-PBI membranes due to the robust frameworks, adjustable structures, and good compatibility with polymers. Here, in this work, we synthesized porous COFs named TTA-DFP containing triazine rings and pyridine groups at room temperature for as short as 2 h without oxygen isolation. TTA-DFP was then blended with commercial poly[2,2'-(p-oxidiphenylene)-5,5'-benzimidazole] (OPBI) to prepare composite membranes. The abundant alkaline N sites in TTA-DFP exhibit strong interactions with PA and OPBI, which not only provide more proton transport pathways to promote proton conduction but also immobilize PA in acidophilic micropores to reduce PA leakage. The composite membranes exhibit a much lower volume swelling ratio than that of the OPBI membrane. The PA retention of the composite membrane after 120 h of treatment at 80 °C and 40% relative humidity can reach as high as 84.6%. Particularly, the proton conductivity of the composite membrane doped with 15 wt% TTA-DFP achieves 0.112 S cm-1 at 180 °C without humidification with a swelling ratio of 24.1%. In addition, it has an optimal peak power density of 824.4 mW cm-2 at 180 °C, which is 1.7 times that of the OPBI membrane. The stability of the composite membrane is much better than that of OPBI at a current density of 0.3 A cm-2 at 140 °C for 120 h.

Additive Mixing of Emissive Ligands in Covalent Organic Frameworks for White Light Emission

Emissive covalent organic frameworks (COFs) are a promising class of crystalline materials that have demonstrated applications for sensing and light-emitting diodes. However, white light emission from a single COF has not been achieved yet as it requires multicomponent organic chromophores that simultaneously emit blue, green, and red light. In this work, we report the successful synthesis of a single COF with efficient white light emission by utilizing tunable emission properties of 2,1,3-benzothiadazole after incorporating different functional groups on its core structure, which results in the formation of three ligands, i.e., 4',4-(benzothiadiazole-4,7-diyl)-dibenzaldehyde (BTD), 4,4'-(benzoselenadiazole-4,7-diyl)-dibenzaldehyde (BSD), and 4,4'-(naphtho[2,3-c][1,2,3] selenadiazole-4,9-diyl)-dibenzaldehyde (NSD), that emit in the blue, green, and red regions of the visible light spectrum. We show that white light emission can only occur when BTD, BSD, and NSD are assembled in a single COF structure due to the facilitated energy transfer process from BTD to BSD/NSD. This work demonstrates a unique approach to developing new white light-emitting materials based on the COF structure.

Encapsulation engineering of porous crystalline frameworks for delayed luminescence and circularly polarized luminescence

Delayed luminescence (DF), including phosphorescence and thermally activated delayed fluorescence (TADF), and circularly polarized luminescence (CPL) exhibit common and broad application prospects in optoelectronic displays, biological imaging, and encryption. Thus, the combination of delayed luminescence and circularly polarized luminescence is attracting increasing attention. The encapsulation of guest emitters in various host matrices to form host-guest systems has been demonstrated to be an appealing strategy to further enhance and/or modulate their delayed luminescence and circularly polarized luminescence. Compared with conventional liquid crystals, polymers, and supramolecular matrices, porous crystalline frameworks (PCFs) including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolites and hydrogen-bonded organic frameworks (HOFs) can not only overcome shortcomings such as flexibility and disorder but also achieve the ordered encapsulation of guests and long-term stability of chiral structures, providing new promising host platforms for the development of DF and CPL. In this review, we provide a comprehensive and critical summary of the recent progress in host-guest photochemistry via the encapsulation engineering of guest emitters in PCFs, particularly focusing on delayed luminescence and circularly polarized luminescence. Initially, the general principle of phosphorescence, TADF and CPL, the combination of DF and CPL, and energy transfer processes between host and guests are introduced. Subsequently, we comprehensively discuss the critical factors affecting the encapsulation engineering of guest emitters in PCFs, such as pore structures, the confinement effect, charge and energy transfer between the host and guest, conformational dynamics, and aggregation model of guest emitters. Thereafter, we summarize the effective methods for the preparation of host-guest systems, especially single-crystal-to-single-crystal (SC-SC) transformation and epitaxial growth, which are distinct from conventional methods based on amorphous materials. Then, the recent advancements in host-guest systems based on PCFs for delayed luminescence and circularly polarized luminescence are highlighted. Finally, we present our personal insights into the challenges and future opportunities in this promising field.

Constructing Highly Emissive Covalent Organic Frameworks for Fe3+ Ion Detection via Wall Function

Covalent organic frameworks (COFs) represent a new type of crystalline porous polymers that possess pre-designed skeletons, uniform nanopores, and ordered π structure. These attributes make them well-suited for the design of light-emitting materials. However, the majority of COFs exhibits poor luminescence due to aggregation-caused quenching (ACQ), resulting from the strong interaction between adjacent layers. To break the limitation, the building units with three methoxy groups on the walls are used to construct TM-OMe-EBTHz-COF, which suppresses the ACQ effects to improve light-emitting activity of COF. The TM-OMe-EBTHz-COF exhibits a notable emission of yellow-green luminescence in the solid state, with a remarkably high absolute quantum yield of 21.1%. The methoxy groups and hydrazine linkage form three coordination sites, contributing to excellent performance in metal ions sensing. The TM-OMe-EBTHz-COF demonstrates high sensitivity and selectivity to Fe3+ ion. Importantly, the low detection limit is below 150 nanomolar, ranking it among the best-performing Fe3+ sensor systems.

Tuning the Topology of Two-Dimensional Covalent Organic Frameworks through Site-Selective Synthetic Strategy

Tuning the topology of two-dimensional (2D) covalent organic frameworks (COFs) is of paramount scientific interest but remains largely unexplored. Herein, we present a site-selective synthetic strategy that enables the tuning of 2D COF topology by simply adjusting the molar ratio of an amine-functionalized dihydrazide monomer (NH2 -Ah) and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (Tz). This approach resulted in the formation of two distinct COFs: a clover-like 2D COF with free amine groups (NH2 -Ah-Tz) and a honeycomb-like COF without amine groups (Ah-Tz). Both COFs exhibited good crystallinity and moderate porosity. Remarkably, the clover-shaped NH2 -Ah-Tz COF, with abundant free amine groups, displayed significantly enhanced adsorption capacities toward crystal violet (CV, 261 mg/g) and congo red (CR, 1560 mg/g) compared to the non-functionalized honeycomb-like Ah-Tz COF (123 mg/g for CV and 1340 mg/g for CR), underscoring the pivotal role of free amine functional groups in enhancing adsorption capacities for organic dyes. This work highlights that the site-selective synthetic strategy paves a new avenue for manipulating 2D COF topology by adjusting the monomer feeding ratio, thereby modulating their adsorption performances toward organic dyes.

Raising the Asymmetric Catalytic Efficiency of Chiral Covalent Organic Frameworks by Tuning the Pore Environment

Chiral covalent organic frameworks (COFs) hold considerable promise in the realm of heterogeneous asymmetric catalysis. However, fine-tuning the pore environment to enhance both the activity and stereoselectivity of chiral COFs in such applications remains a formidable challenge. In this study, we have successfully designed and synthesized a series of clover-shaped, hydrazone-linked chiral COFs, each with a varying number of accessible chiral pyrrolidine catalytic sites. Remarkably, the catalytic efficiencies of these COFs in the asymmetric aldol reaction between cyclohexanone and 4-nitrobenzaldehyde correlate well with the number of accessible pyrrolidine sites within the frameworks. The COF featuring nearly one pyrrolidine moiety at each nodal point demonstrated excellent reaction yields and enantiomeric excess (ee) values, reaching up to 97 and 83%, respectively. The findings not only underscore the profound impact of a deliberately controlled chiral pore environment on the catalytic efficiencies of COFs but also offer a new perspective for the design and synthesis of advanced chiral COFs for efficient asymmetric catalysis.

Covalent Organic Framework Impregnated with Silver and Copper Nanoparticles: An Advanced Approach for Catalytic Degradation of Organic Pollutants in Wastewater

In this study, we introduce an economically viable and scalable process for developing a novel covalent organic framework (COF), which is a cross-linked polymer. The resulting material, TzTFB-COF, is successfully functionalized with silver and copper nanoparticles, which show high adequacy in the degradation of nitroaromatic compounds (NACs). For the synthesis of TzTFB-COF, s-tetrazine diamine (Tz) and 1,3,5-triformylbenzene (TFB) are chosen as building blocks, which exhibit a high density of nitrogen-containing sites. TzTFB-COF shows good chemical and thermal stability (>300 °C). For functionalization of TzTFB-COF with silver and copper nanoparticles, a solution infiltration technique is used. The composite materials, i.e., Ag@TzTFB-COF and Cu@TzTFB-COF, have been characterized using various spectroscopic and analytical techniques, which show high activity, high selectivity, and excellent chemical and thermal stability up to 350 °C. The silver and copper contents of Ag@TzTFB-COF and Cu@TzTFB-COF are determined to be 9.6 and 12.4 wt % by inductively coupled plasma optical emission spectrometer (ICP-OES). The catalytic efficiency of the synthesized Ag@TzTFB-COF and Cu@TzTFB-COF materials is assessed in the context of catalyzing the hydrogenation of NACs. Experimental results reveal a remarkable catalytic performance when conducted in an aqueous medium, and notably, the materials demonstrate substantial potential for reusability across multiple catalytic cycles. The determined parameters for the catalytic hydrogenation reaction, i.e., the rate constants and Gibbs free energies, are found to be 0.0185 s-1 and 9.878 kJ/mol for Ag@TzTFB-COF and 0.0219 s-1 and 9.615 kJ/mol for Cu@TzTFB-COF. Thus, the catalytic reaction exhibits characteristics of endothermic, endergonic, and nonspontaneous nature.

Linkages Make a Difference in the Photoluminescence of Covalent Organic Frameworks

Covalent organic frameworks (COFs) with structural designability and tunability of photophysical properties enable them to be a promising class of organic luminescent materials by incorporating well-designed fluorescent units directly into the periodic skeletons. The photophysical properties of COFs are mainly affected by the structural features, which determine the conjugation degree, charge delocalization ability, and exciton dynamics of COFs. To understand the relationship between COF structures and their photophysical properties, two COFs with the same pyrene chromophore units but different linkages (imine or vinylene) were designed and synthesized. Interestingly, different linkages endow COFs with huge differences in solid-state photoluminescence quantum yield (PLQY) for imine- and vinylene-linked pyrene-based COFs, which possess PLQY values of 0.34 % and 15.43 %, respectively. The femtosecond-transient absorption spectra and time-dependent density functional theory reveal the different charge-transfer pathways in imine- and vinylene-linked COFs, which influence the exciton relaxation way and fluorescence intensity. In addition, an effective white-light device was obtained by coating the vinylene-linked COF on a light-emitting diode strip.

Vinylene-Linked Emissive Covalent Organic Frameworks for White-Light-Emitting Diodes

Covalent organic frameworks (COFs) have gained considerable attention due to their highly conjugated π-skeletons, rendering them promising candidates for the design of light-emitting materials. In this study, we present two vinylene-linked COFs, namely, VL-COF-1 and VL-COF-2, which were synthesized through the Knoevenagel condensation of 2,4,6-trimethyl-1,3,5-triazine with terephthalaldehyde or 4,4'-biphenyldicarboxaldehyde. Both VL-COF-1 and VL-COF-2 exhibited excellent chemical and thermal stability. The presence of vinylene linkages between the constituent building blocks in these COFs resulted in broad excitation and emission properties. Remarkably, the designed VL-COFs demonstrated bright emission, fast fluorescence decay, and high stability, making them highly attractive for optoelectronic applications. To assess the potential of these VL-COFs in practical devices, we fabricated white-light-emitting diodes (WLEDs) coated with VL-COF-1 and VL-COF-2. Notably, the WLEDs coated with VL-COF-1 achieved high-quality white light emission, closely approximating standard white light. The promising performance of VL-COF-coated WLEDs suggests the feasibility of utilizing COF materials for stable and efficient lighting applications.

Lanthanide Functionalized Covalent Organic Frameworks Hybrid Materials for Luminescence Responsive Chemical Sensing

Covalent organic frameworks (COFs) possess several unique features of structural and functional chemistry, together with other modular photophysical performance, which make them candidates for luminescence responsive chemical sensing. Lanthanide (Ln3+ ) functionalized COFs hybrid materials still keep the parent COFs' virtues and also embody the abundant multiple luminescence response with both COFs and Ln3+ ions or other guest species. In this review, the summary is highlighted on the lanthanide functionalized COFs hybrid materials and their relevant systems for luminescence responsive chemical sensing. It is subdivided into five sections involving the three main topics. Firstly, the basic knowledges of COFs materials related to the luminescence responsive chemical sensing are introduced (including three sections), involving the chemistry, application and post-synthetic modification (PSM) of COFs, the luminescence and luminescence responsive chemical sensing, and the luminescence responsive chemical sensing of non-lanthanide functionalized COFs hybrids materials. Secondly, the systematic progresses are outlined on the lanthanide functionalized COFs hybrid materials in luminescence responsive chemical sensing, which is the emphasis for this review. Finally, the conclusion and prospect are given.

Turning 3D Covalent Organic Frameworks into Luminescent Ratiometric Temperature Sensors

In this study, we report hybrid crystalline lanthanide-containing 3D covalent organic framework (Ln@3D COF) materials that are suitable for temperature sensing applications. Different routes to obtain these hybrid materials were tested and compared for material quality and thermometric properties. In the first approach, a bipyridine-containing 3D COF (Bipy COF) was grafted with a range of visible emitting lanthanide (Eu3+, Tb3+, Dy3+, and Eu3+/Tb3+) β-diketonate complexes. In the second approach, a novel nanocomposite material was prepared by embedding NaYF4:Er,Yb nanoparticles on the surface of a nonfunctionalized 3D COF (COF-300). To the best of our knowledge, the luminescent materials developed here are the first 3D COFs to be tested as ratiometric temperature sensors. In fact, for the Bipy COF, two different types of thermometers were tested (the Eu3+/Tb3+ system and a rare Dy3+ system), with both showing excellent temperature sensing properties. The reported NaYF4:Er,Yb/COF-300 nanocomposite material combines upconverting nanoparticles with 3D COFs, similar to previously reported metal organic framework (MOF) nanocomposite materials; however, this type of hybrid material has not yet been explored for COFs. As such, our findings open a new pathway toward potential multifunctional materials that can combine thermometry with other modalities, such as catalysis or drug delivery, in just one nanocomposite material.

Asymmetric gradient orbital interaction of hetero-diatomic active sites for promoting C - C coupling

Diatomic-site catalysts (DACs) garner tremendous attention for selective CO₂ photoreduction, especially in the thermodynamical and kinetical mechanism of CO₂ to C₂₊ products. Herein, we first engineer a novel Zn-porphyrin/RuCu-pincer complex DAC (ZnPor-RuCuDAC). The heteronuclear ZnPor-RuCuDAC exhibits the best acetate selectivity (95.1%), while the homoatomic counterparts (ZnPor-Ru₂DAC and ZnPor-Cu₂DAC) present the best CO selectivity. In-situ spectroscopic measurements reveal that the heteronuclear Ru-Cu sites easily appear C₁ intermediate coupling. The in-depth analyses confirm that due to the strong gradient orbital coupling of Ru4d-Cu3d resonance, two formed ^*CO intermediates of Ru-Cu heteroatom show a significantly weaker electrostatic repulsion for an asymmetric charge distribution, which result from a side-to-side absorption and narrow dihedral angle distortion. Moreover, the strongly overlapped Ru/Cu-d and CO molecular orbitals split into bonding and antibonding orbitals easily, resulting in decreasing energy splitting levels of C₁ intermediates. These results collectively augment the collision probability of the two ^*CO intermediates on heteronuclear DACs. This work first provides a crucial perspective on the symmetry-forbidden coupling mechanism of C₁ intermediates on diatomic sites.

Tetra-Nuclear Cluster-Based Lanthanide Metal-Organic Frameworks as White Phosphor, Information Encryption, Self-Calibrating Thermometers, and Fe2+ Sensors

The application of one kind of metal-organic framework (MOF) material used in multiple fields is one of the most interesting research topics. In this work, four new tetra-nuclear cluster-based lanthanide metal-organic frameworks (LnMOFs) [Ln₂(BTDB)₃(DMA)(phen)]_n (Ln = Tb TbMOF, Eu EuMOF, Gd GdMOF, Tb_1.830Eu_0.170 Tb,EuMOF, 3,5-bis(trifluoromethyl)-4',4″-dicarboxytriphenylamine = H₂BTDB, 1,10-phenanthroline = phen) are obtained based on the ligand of H₂BTDB that is synthesized in our laboratory, and the precise single-crystal structure of H₂BTDB is obtained for the first time. The white phosphor was obtained by facilely hybridizing two components of the orange-yellow emission phosphor of Tb,EuMOF and the blue luminescence material of triphenylamine according to the trichromatic theory. At the same time, TbMOF, EuMOF, Tb,EuMOF, and the white phosphor can be used for information encryption, demonstrating their potential application in the field of anti-counterfeiting. Tb,EuMOF is also a multi-mode and self-calibrating thermometer within a broad temperature range of 110-300 K. Further studies show that EuMOF is a rapid response sensor for Fe²⁺, with a very low limit of detection of 2.0 nM, which is much lower than the national standards for Fe²⁺ (GB 5749-2005, 5.357 μM). It can achieve strong anti-interference detection of Fe²⁺ in actual samples of tap water and lake water. In addition, EuMOF can also be made into an easy-to-use sensing device of test paper for real-time and visual sensing of Fe²⁺.

Covalent Organic Framework as a Metal-Free Photocatalyst for Dye Degradation and Radioactive Iodine Adsorption

Exploring a covalent organic framework (COF) material as an efficient metal-free photocatalyst and as an adsorbent for the removal of pollutants from contaminated water is very challenging in the context of sustainable chemistry. Herein, we report a new porous crystalline COF, C₆-TRZ-TPA COF, via segregation of donor-acceptor moieties through the extended Schiff base condensation between tris(4-formylphenyl)amine and 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline. This COF displayed a Brunauer-Emmett-Teller (BET) surface area of 1058 m² g^-1 with a pore volume of 0.73 cc g^-1. Again, extended π-conjugation, the presence of heteroatoms throughout the framework, and a narrow band gap of 2.2 eV, all these features collectively work for the environmental remediation in two different perspectives: it could harness solar energy for environmental clean-up, where the COF has been explored as a robust metal-free photocatalyst for wastewater treatment and as an adsorbent for iodine capture. In our endeavor of wastewater treatment, we have conducted the photodegradation of rose bengal (RB) and methylene blue (MB) as model pollutants since these are extremely toxic, are health hazard, and bioaccumulative in nature. The catalyst C₆-TRZ-TPA COF showed a very high catalytic efficiency of 99% towards the degradation of 250 parts per million (ppm) of RB solution in 80 min under visible light irradiation with the rate constant of 0.05 min^-1. Further, C₆-TRZ-TPA COF is found to be an excellent adsorbent as it efficiently adsorbed radioactive iodine from its solution as well as from the vapor phase. The material exhibits a very rapid iodine capturing tendency with an outstanding iodine vapor uptake capacity of 4832 mg g^-1.

Multi-color fluorescence sensing platform for visual determination of norfloxacin based on a terbium (Ш) functionalized covalent organic framework

Sensitive and visual determination of fluoroquinolone antibiotics (FQs) is of great significance since their abuse and inappropriate handling can be problematic. Herein, we propose a lanthanide covalent organic framework fluorescence sensing system (Tb@COF-Ru) with visualization capability to determine the FQs level, where Tb@COF was employed as the sensing probe, while the red-emitting Ru(bpy)₃²⁺ serves as a constant red fluorescent background. With increasing norfloxacin concentration, the green fluorescence of Tb³⁺ is gradually enhanced, finally realizing the multicolor fluorescence change from red to green. With a smartphone for RGB analysis, visual monitoring and quantitative analysis were realized without any sophisticated instrument. Limits of detection for the fluorescence quantitative and visual mode for norfloxacin were 0.33 nM and 7.3 μM, respectively. This method was rapid (1 min) and visualized, providing a simple analysis of various food matrices (honey, milk, egg and beef) and water samples for trace FQs.

Linker Engineering of 2D Imine Covalent Organic Frameworks for the Heterogeneous Palladium-Catalyzed Suzuki Coupling Reaction

Covalent organic frameworks (COFs) are an emerging class of porous organic polymers that have been utilized as scaffolds for anchoring metal active species to act as heterogeneous catalysts. Though several examples of such COFs exist, a thorough experimental and computational analysis on such catalysts is limited. In this work, a series of two-dimensional (2D) imine COFs (TTA-DFB COF (N), TTA-TBD COF (N∧O), and TTA-DFP COF(N∧N)) were synthesized by using suitable building units to obtain three different coordination sites (N, N∧O, and N∧N). These were post-modified with Pd(II) to catalyze the Suzuki-Miyaura coupling reaction. Pd@TTA-DFB COF, where Pd(II) was coordinated to N sites, showed the fastest reactivity and lower stability. Pd@TTA-DFP COF showed highest stability but slowest reactivity. Pd@TTA-TBD COF was the best among the three with both high stability and fast reactivity. By combining both experimental and computational results, we conclude that the Pd(II) to Pd(0) reduction is a key step in the difference between the catalytic reactivities of the three COFs. This study demonstrates the importance of the building block approach to design COFs for efficient heterogeneous catalysis and to understand the fate of the reaction profile.

Eu(III) Functionalized Crystalline Polyimide Hydrogel Film as a Multifunctional Platform for Consecutive Sensing of Spermine and Copper Ions

In this study, a novel Eu(III) functionalized crystalline polyimide hydrogel film (Eu-1) is fabricated by incorporating highly stable polyimide (PI) into a sodium alginate (SA) matrix, followed by cross-linking reaction with Eu³⁺ ions. Based on different fluorescence responses, Eu-1 is used for the consecutive detection of spermine (Spm) and copper ions (Cu²⁺). Eu-1 can be employed as a sensor for polyamine, especially for Spm with significant fluorescence enhancement based on the "turn on" mode. The fluorescent sensor Eu-1@Spm constructed by the Eu-1 and Spm can be further used as a "turn off" sensor to quantitatively monitor Cu²⁺. The good selectivity combined with the low detection limit of the sensor meets the requirements for monitoring Cu²⁺. The possible luminescence response mechanisms to Spm and Cu²⁺ have been studied through experimental data and theoretical calculations. In addition, a back-propagation neural network (BPNN) model based on an Eu-1@Spm sensor is constructed, which can accurately distinguish Cu²⁺ concentrations by deep machine learning (ML). This work not only puts forward a facile method to prepare a novel Eu-functionalized PI-based hybrid film but also demonstrates the potential of PI-based film materials for fluorescence detection.

Tale of COF-on-MOF Composites with Structural Regulation and Stepwise Luminescence Enhancement

Integrating metal-organic framework (MOF)-covalent organic framework (COF) allows versatile engineering of hybrid materials with properties superior to pristine components, especially COFs suffered from aggregation-caused quenching (ACQ), unlocking more possibilities to improve the luminescence of COFs. In this work, we prepared various MOF@COF composites with different COF layer thicknesses, in which stable UiO-66-NH₂ served as the inner substrate and 1,3,5-benzenetricarboxaldehyde (BT), and 3,3'-dihydroxybenzidine (DH) were used to construct a COF layer. In addition to the conventional preparation method, we increased the ratio of BT and DH to be 1:2.5, and impressively, the morphologies of acquired UC (1:2.5) materials were quite different from the previous reticular structure and gradually extended from the spherical structure to the prickly structure with the increase of COF monomers. Remarkably, all of the UC materials possessed better luminescence properties than individual COF due to the limited COF layers. Meanwhile, UC-1 materials with an optimal COF layer displayed the strongest emission. In comparison with a single COF, the quantum yields of UC-1 and UC-1 (1:2.5) were increased nearly 7 times and 5 times, respectively. Moreover, the fluorescence of UC-1 materials was progressively enhanced via selective F^- sensing. This work is expected to shed light on the potential hybridization of MOF-COF with structural adjustment, morphological design, and luminescence enhancement.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Functionalized luminescent covalent organic frameworks hybrid material as smart nose for the diagnosis of Huanglongbing

Quantitative identification of several volatile organic compounds (VOCs) associated with the same disease provides a strong guarantee of the accurate analysis of the disease. Designing a single luminescent material to interact differently with multiple analytes can generate response patterns with remarkable diversity. Here, a highly green luminescent imine-based 2D COF (TtDFP) is designed and synthesized. TtDFP has ultrasensitive detection performance for trace water in organic solvent. Constructing a ratiometric fluorescence sensor can improve sensitivity for detecting analytes. To contrast the fluorescence signals of Eu³⁺ and COFs in sensing assays, a simple postsynthetic modification (PSM) method is used to introduce Eu³⁺ into TtDFP. The obtained red luminescent hybrid material Eu³⁺@TtDFP EVA film can be a fluorescent nose capable of "sniffing out" and quantifying VOCs (GA and PhA) associated with Huanglongbing (HLB, a devastating disease of citrus) at ppb levels. This work provides a technique of developing functionalized COF hybrid material to facilitate the distinction of various VOCs, which can also be extended to monitor the levels of other VOCs relevant to human health.

Facile fabrication of Tb3+-functionalized COF mixed-matrix membrane as a highly sensitive platform for the sequential detection of oxolinic acid and nitrobenzene

A novel Tb³⁺-functionalized covalent organic framework-based polymer mixed-matrix membrane (Tb³⁺@COF MMM) has been successfully fabricated by incorporating the highly stable Tb³⁺@PI-COF as filler into polyvinylidene fluoride (PVDF) solution. Compared with pure COF membrane, MMM exhibits its good flexibility, processability and high detection sensitivity. The obtained Tb³⁺@COF-MMM (M) can be employed as a highly sensitive sensing platform for the sequential detection of oxolinic acid (OA) and nitrobenzene (NB) based on a "off-on-off" process. M has performed its great selectivity, high sensitivity, and low detection limit for detecting OA with "turn-on" mechanism. Moreover, owing to the good chemical stability and anti-interference of M sensor, it is prospective to efficiently detect residues of OA in serum or river water. After the detection of M-15 toward OA, the obtained fluorescent M-15/OA exhibits the rapid quenching, facile manipulation, cycling utility and low detection limits for sensing NB solution and vapor. This work has proposed a typical case of developing flexible Ln³⁺-functionalized COF-based polymer mixed-matrix membrane as a highly sensitive sensing platform for detecting OA and NB, simultaneously revealed the applied potentiality of M for monitoring animal health and environmental pollution.

2D Covalent Organic Frameworks: From Synthetic Strategies to Advanced Optical-Electrical-Magnetic Functionalities

Covalent organic frameworks (COFs), an emerging class of organic crystalline polymers with highly oriented structures and permanent porosity, can adopt 2D or 3D architectures depending on the different topological diagrams of the monomers. Notably, 2D COFs have particularly gained much attention due to the extraordinary merits of their extended in-plane π-conjugation and topologically ordered columnar π-arrays. These properties together with high crystallinity, large surface area, and tunable porosity distinguish 2D COFs as an ideal candidate for the fabrication of functional materials. Herein, this review surveys the recent research advances in 2D COFs with special emphasis on the preparation of 2D COF powders, single crystals, and thin films, as well as their advanced optical, electrical, and magnetic functionalities. Some challenging issues and potential research outlook for 2D COFs are also provided for promoting their development in terms of structure, synthesis, and functionalities.

The postsynthetic renaissance of luminescent lanthanide ions on crystalline porous organic framework materials

A series of crystalline porous organic framework materials (CPOFs), such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen bonded organic frameworks (HOFs) have received extensive attentions due to...

An imine-linked covalent organic framework for renewable and sensitive determination of antibiotic

Lanthanide-functionalized porous organic materials have been the promising candidates in the chemical and biological sensing. Considering the superior thermal and solvent stability of covalent organic frameworks (COFs), the development of lanthanide ions-functionalized COFs based sensing platform is meaningful, while remains to be a challenge. In this work, a new imine-linked COF which provides suitable coordination sites for Tb³⁺ was constructed via the Schiff base reaction between P-phenylenediamine (Pda) and 2,6-Diformylpyridine (Dfp). Benefiting from its high signal-to-noise, the COF@Tb shows excellent ability to determinate ciprofloxacin (CIP) with a detection limit of 3.01 nM. The measurement can maintain good stability in the presence of potential interference or in actual sample. Being washed with ethanol after each measurement, COF@Tb can be recycled for five times. This work provides a novel alternative strategy for efficient construction of lanthanide-grafted COFs and may promote the development of porous organic materials based chemical sensing.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Controllable Synthesis and Performance Modulation of 2D Covalent-Organic Frameworks

Covalent-organic frameworks (COFs) are especially interesting and unique as their highly ordered topological structures entirely built from plentiful π-conjugated units through covalent bonds. Arranging tailorable organic building blocks into periodically reticular skeleton bestows predictable lattices and various properties upon COFs in respect of topology diagrams, pore size, properties of channel wall interfaces, etc. Indeed, these peculiar features in terms of crystallinity, conjugation degree, and topology diagrams fundamentally decide the applications of COFs including heterogeneous catalysis, energy conversion, proton conduction, light emission, and optoelectronic devices. Additionally, this research field has attracted widespread attention and is of importance with a major breakthrough in recent year. However, this research field is running with the lack of summaries about tailorable construction of 2D COFs for targeted functionalities. This review first covers some crucial polymeric strategies of preparing COFs, containing boron ester condensation, amine-aldehyde condensation, Knoevenagel condensation, trimerization reaction, Suzuki CC coupling reaction, and hybrid polycondensation. Subsequently, a summary is made of some representative building blocks, and then underlines how the electronic and molecular structures of building blocks can strongly influence the functional performance of COFs. Finally, conclusion and perspectives on 2D COFs for further study are proposed.

Electron-Rich Pincer Ligand-Coupled Cobalt Porphyrin Polymer with Single-Atom Sites for Efficient (Photo)Electrocatalytic CO2 Reduction at Ultralow Overpotential

Porphyrin and phthalocyanine complexes bearing single-atom catalytic sites (M-N₄ ) have been explored as promising electrocatalysts for CO₂ reduction reaction (CO₂ RR), whose activity can be improved by regulating the ligands and/or the metal centers. Moreover, their photosensitive features also provide the possibility for highly efficient photoelectrocatalytic CO₂ RR. Herein, a novel N'NN'-pincer-ligand (N₃ )-coupled cobalt porphyrin (CoPor-N₃ ) polymer is developed for realizing efficient (photo)electrocatalytic CO₂ RR. The unraveled electronic structure and (photo)electrocatalytic features suggest that a synergistic effect between the electron-rich N₃ ligands and the Co-N₄ single-atom sites in the CoPor-N₃ polymer results in the Co centers attaining more electrons, which is beneficial to facilitating the electron transfer to CO₂ for the activation and reduction processes. As expected, the resultant CoPor-N₃ polymer delivers a good long-term durability and high CO faradaic efficiency (96%) at an ultralow overpotential (0.39 V), which outperforms the CoPor alone and most porphyrin-/phthalocyanine-based electrocatalysts reported so far. Moreover, the photosensitivity of CoPor units can further reduce the overpotential to 0.34 V with a CO faradaic efficiency over 90% under light illumination. The present findings offer a new approach to constructing porphyrin-based photosensitive electrocatalysts with high-efficiency photoelectrocatalytic CO₂ RR.

Upconverting Er3+-Yb3+ Inorganic/Covalent Organic Framework Core-Shell Nanoplatforms for Simultaneous Catalysis and Nanothermometry

Lanthanide-based luminescent nanoparticles that are thermally responsive can be used to probe temperature changes at a nanoscale regime. However, materials that can work as both a nanothermometer and a catalyst are limited. Herein, we show that covalent organic frameworks (COFs), which is an emerging class of porous crystalline materials, can be grown around lanthanide nanoparticles to create unique core-shell nanostructures. In this way, the COF (shell) supports copper metal ions as catalytic sites and simultaneously lanthanide nanoparticles (β-NaLuF₄:Gd,Er,Yb-core) locally measure the temperature during the catalytic reaction. Moreover, β-NaLuF₄:Gd,Er,Yb nanoparticles are upconverting materials and hence can be excited at longer wavelengths (975 nm), which do not affect the catalysis substrates or the COF. As a proof-of-principle, a three-component addition reaction of benzaldehyde, indole, and malononitrile was studied. The local temperature was probed using luminescence nanothermometry during the catalytic reaction.

Acridine-Based Covalent Organic Framework Photosensitizer with Broad-Spectrum Light Absorption for Antibacterial Photocatalytic Therapy

Antibiotic resistance is considered as one of the serious public health issues. Antibacterial photocatalytic therapy, a clinically proven antibacterial therapy, is gaining increasing attention in recent years owing to its high efficacy. Here, an acridine-based covalent organic framework (COF) photosensitizer, named TPDA, with multiple active sites is synthesized via Schiff base condensation between 2,4,6-triformylphloroglucinol (TFP) and 3,6-diaminoacridine (DAA). Owing to the increased conjugation effect of the COF skeleton and outstanding light harvesting ability of DAA, TPDA exhibits a narrow optical band gap (1.6 eV), enhancing light energy transformation and conferring a wide optical absorption spectrum (intensity arbitrary unit > 0.8) ranging from the UV to near-infrared region. Moreover, TPDA shows high antibacterial activities against both gram-negative and gram-positive bacteria within a short time (10 min) of light irradiation and is found to efficiently protect fish from skin infections. Molecular dynamics simulation data show that the introduction of DAA and TFP facilitates the interaction between TPDA and bacteria and is conducive to reactive oxygen species migration, which further improves the antimicrobial performance. These findings indicate the potential of TPDA as a novel photosensitive material for photodynamic therapy.

Polyacrylamide-Based Binary Luminescent Copolymer Materials Exhibit Color-Tunable and Efficient Long-Lived Room Temperature Phosphorescence

Polymer-based pure organic room temperature phosphorescence (RTP) materials have garnered considerable interest, among which RTP systems with prolonged lifetimes and tunable emission colors are promising for applications in sensing, flexible electronics, bioassay, anti-counterfeiting, and data encryption. Herein, facile doping method is reported based on two types of copolymers with benzene/biphenyl-based light-emitting cores as their side chains, whereby the two copolymers are robustly crosslinked via noncovalent interactions including hydrogen bonding and halogen bonding that occur between the light-emitting cores and polyacrylamide backbones. Persistent RTP emission with prolonged lifetime up to 1.9 s and phosphorescence quantum yield as high as 40.1% are obtained in single copolymers, attributed to the conformation restriction of phosphorescent dyes originating from the rigid microenvironment. Furthermore, multicolor phosphorescence signals are observed in the doped binary luminescent copolymer systems that can be effectively regulated by the feed ratio of luminescent cores and irradiation wavelengths. Possible mechanisms for this efficient and long-lived color-tunable RTP system are discussed on the basis of the experimental data and theoretical calculations. In addition, it is also demonstrated that the color-tunable RTP emission of the doped copolymer systems under ambient conditions allows for further exploitation in the application of dynamic information encryption.

Designing water-quenching resistant highly luminescent europium complexes by regulating the orthogonal arrangement of bis-β-diketone ligands

Luminescent β-diketone-based lanthanide complexes have been well explored as chemical sensor materials for biomedicine applications. Herein, three mononuclear Eu3+ complexes based on bis-β-diketone ligands (L1, L2 and L3) that can reduce luminescence quenching caused by water were developed. The ligands feature two β-diketone units covalently bound at the 1,8-position of the derivatized anthracene (modified with tetracyanoethylene, TCNE). X-ray crystallographic analysis reveals that their self-assemblies with Ln3+ ions in a 2 : 1 stoichiometric ratio form mononuclear anion complexes, [EuL2]-, in which two ligands coordinate to the metal center in a mutually orthogonal manner. This kind of arrangement together with the bulge of TCNE from the anthracene plane well protected the complexes from the quenching effects of water molecules in the second coordination. The photophysical measurements showed that the complexes not only had high luminescence quantum yields (QYs, up to 50-67%) but also presented excellent water-quenching resistant capability.

Activation of Carbonyl Oxygen Sites in β-Ketoenamine-Linked Covalent Organic Frameworks via Cyano Conjugation for Efficient Photocatalytic Hydrogen Evolution

2D covalent organic frameworks (COFs) are drawing intense attention in heterogenous photocatalysis due to their porous, crystalline, and tailor-made structures. For highly efficient solar-to-chemical energy conversion, revealing and modulating active centers in the skeletons of COFs are of great importance but encounter severe challenges. Herein, it is demonstrated that cyano conjugation on a typical β-ketoenamine-linked COF via aldehyde-imine Schiff-base condensation contributes to an enhanced stable photocatalytic H₂ -evolution rate of 1.8 mmol h^-1 g^-1 (λ > 420 nm) with a superior apparent quantum yield of 2.12% at 420 nm, compared to pristine COFs. Both experimental results and density functional theory calculations disclose that the cyano conjugation can efficiently improve photoinduced charge separation and effectively decrease the energy barrier for H-intermediate generation on the carbonyl oxygen sites of the functionalized COFs. These findings present a precise organic functionalization strategy to optimize active centers on COF-based photocatalysts for the practical applications.

Fabricating Nanosheets and Ratiometric Detection of 5-Fluorouracil by Covalent Organic Framework Hybrid Material

Covalent organic framework (COF) nanosheets (NSs) are a new member in the family of two-dimensional (2D) nanomaterials that received increasing attention. The ability to prepare COF NSs with rapid acquisition is of great importance to explore their distinctive properties and potential applications. Herein, we elaborate design a new COF hybrid material EB-TFP:Eu(BTA)₄ as a sensing platform. In the process of ratiometric fluorescence detection of 5-fluorouracil (5FU), an anticancer drug, we realize the preparation of COF NSs. Interaction occurs between 5FU and COF hybrid material, where the interlayer π-π stacking of COF was weakened, benefiting the exfoliation of bulk COF to acquire 2D COF NSs. This strategy provides not only a sensitive and selective 5FU sensor but also a significant inspiration for engineering 2D COF NSs.

Optoelectronic processes in covalent organic frameworks

Covalent organic frameworks (COFs) are crystalline porous materials constructed from molecular building blocks using diverse linkage chemistries. The image illustrates electron transfer in a COF-based donor–acceptor system. Image by Nanosystems Initiative Munich.

Luminescent Ratiometric Thermometers Based on a 4f-3d Grafted Covalent Organic Framework to Locally Measure Temperature Gradients During Catalytic Reactions

Covalent Organic Frameworks (COFs), an emerging class of crystalline porous materials, are a new type of support for grafting lanthanide ions (Ln³⁺ ), which can be employed as ratiometric luminescent thermometers. In this work we have shown that COFs co-grafted with lanthanide ions (Eu³⁺ , Tb³⁺ ) and Cu²⁺ (or potentially other d-metals) can synchronously be employed both as a nanothermometer and catalyst during a chemical reaction. The performance of the thermometer could be tuned by changing the grafted d-metal and solvent environment. As a proof of principle, the Glaser coupling reaction was investigated. We show that temperature can be precisely measured during the course of the catalytic reaction using luminescence thermometry. This concept could be potentially easily extended to other catalytic reactions by grafting other d-metal ions on the Ln@COF platform.