Design of a Peptide-Based Electronegative Hydrogel for the Direct Encapsulation, 3D Culturing, in Vivo Syringe-Based Delivery, and Long-Term Tissue Engraftment of Cells

Effect of Peptide-Polymer Host-Guest Electrostatic Interactions on Self-Assembling Peptide Hydrogels Structural and Mechanical Properties and Polymer Diffusivity

Peptide-based supramolecular hydrogels are an attractive class of soft materials for biomedical applications when biocompatibility is a key requirement as they exploit the physical self-assembly of short self-assembling peptides avoiding the need for chemical cross-linking. Based on the knowledge developed through our previous work, we designed two novel peptides, E(FKFE)2 and K(FEFK)2, that form transparent hydrogels at pH 7. We characterized the phase behavior of these peptides and showed the clear link that exists between the charge carried by the peptides and the physical state of the samples. We subsequently demonstrate the cytocompatibility of the hydrogel and its suitability for 3D cell culture using 3T3 fibroblasts and human mesenchymal stem cells. We then loaded the hydrogels with two polymers, poly-l-lysine and dextran. When polymer and peptide fibers carry opposite charges, the size of the elemental fibril formed decreases, while the overall level of fiber aggregation and fiber bundle formation increases. This overall network topology change, and increase in cross-link stability and density, leads to an overall increase in the hydrogel mechanical properties and stability, i.e., resistance to swelling when placed in excess media. Finally, we investigate the diffusion of the polymers out of the hydrogels and show how electrostatic interactions can be used to control the release of large molecules. The work clearly shows how polymers can be used to tailor the properties of peptide hydrogels through guided intermolecular interactions and demonstrates the potential of these new soft hydrogels for use in the biomedical field in particular for delivery or large molecular payloads and cells as well as scaffolds for 3D cell culture.

The Design of a Participatory Peptide Nucleic Acid Duplex Crosslinker to Enhance the Stiffness of Self-Assembled Peptide Gels

Herein, peptide nucleic acids (PNAs) are employed in the design of a participatory duplex PNA-peptide crosslinking agent. Biophysical and mechanical studies show that crosslinkers present during peptide assembly leading to hydrogelation participate in the formation of fibrils while simultaneously installing crosslinks into the higher-order network that constitutes the peptide gel. The addition of 2 mol % crosslinker into the assembling system results in a ~100 % increase in mechanical stiffness without affecting the rate of peptide assembly or the local morphology of fibrils within the gel network. Stiffness enhancement is realized by only affecting change in the elastic component of the viscoelastic gel. A synthesis of the PNA-peptide duplex crosslinkers is provided that allows facile variation in peptide composition and addresses the notorious hydrophobic content of PNAs. This crosslinking system represents a new tool for modulating the mechanical properties of peptide-based hydrogels.

Substance P-Derived Extracellular-Matrix-Mimicking Peptide Hydrogel as a Cytocompatible Biomaterial Platform

Self-assembled short peptide-based hydrogel platforms have become widely applicable biomedical therapeutic maneuvers for their soft, tunable architecture, which can influence cellular behavior and morphology to an inordinate extent. In this work, a short supramolecular hydrogelator peptide, substance P, has been designed and synthesized from the C terminus conserved "FFGLM" section of a biologically abundant neuropeptide by using a fusion approach. In addition, to incorporate a good hydrophobic-hydrophilic balance, the truncated pentapeptide segment was further C-terminally modified by the incorporation of an integrin-binding "RGD" motif. Thanks to its N-terminal Fmoc group, this octapeptide ensemble "FFGLMRGD" undergoes rapid self-assembly to give rise to an injectable, pH-responsive, hydrogel-based self-supporting platform that exhibited good cytocompatibility with the cultured mammalian cells under both 2D and 3D culture conditions without exerting any potent cytotoxic effect in a Live/Dead experiment. A rheological experiment demonstrated its hydrogel-like mechanical properties, including thixotropicity. The atomic force microscopy and field emission scanning electron microscopy images of the fabricated hydrogel show a tangled fibrous surface topography owing to the presence of the N-terminal Fmoc-FF residue. Furthermore, an in-vitro scratch assay performed on fibroblast cell lines confirmed the wound-ameliorating potency of this designed hydrogel; this substantiates its future therapeutic prospects.

Peptide Stereocomplexation Orchestrates Supramolecular Assembly of Hydrogel Biomaterials

Stereocomplexation, or specific interactions among complementary stereoregular macromolecules, is burgeoning as an increasingly impactful design tool, exerting exquisite control of material structure and properties. Since stereocomplexation of polymers produces remarkable transformations in mechanics, morphology, and degradation, we sought to leverage stereocomplexation to tune these properties in peptide-based biomaterials. We found that blending the pentapeptides l- and d-KYFIL triggers dual mechanical and morphological transformations from stiff fibrous hydrogels into less stiff networks of plates, starkly contrasting prior reports that blending l- and d-peptides produces stiffer fibrous hydrogels than the individual constituents. The morphological transformation of KYFIL in phosphate-buffered saline from fibers that entangle into hydrogels to plates that cannot entangle explains the accompanying mechanical transformation. Moreover, the blends shield l-KYFIL from proteolytic degradation, producing materials with comparable proteolytic stability to d-KYFIL but with distinct 2D plate morphologies that in biomaterials may promote unique therapeutic release profiles and cell behavior. To confirm that these morphological, mechanical, and stability changes arise from differences in molecular packing as in polymer stereocomplexation, we acquired X-ray diffraction patterns, which showed l- and d-KYFIL to be amorphous and their blends to be crystalline. Stereocomplexation is particularly apparent in pure water, where l- and d-KYFIL are soluble random coils, and their blends form β-sheets and gel within minutes. Our results highlight the role of molecular details, such as peptide sequence, in determining the material properties resulting from stereocomplexation. Looking forward, the ability of stereocomplexation to orchestrate supramolecular assembly and tune application-critical properties champions stereochemistry as a compelling design consideration.

Peptide hydrogels: Synthesis, properties, and applications in food science

Due to the unique and excellent biological, physical, and chemical properties of peptide hydrogels, their application in the biomedical field is extremely wide. The applications of peptide hydrogels are closely related to their unique responsiveness and excellent properties. However, its defects in mechanical properties, stability, and toxicity limit its application in the food field. In this review, we focus on the fabrication methods of peptide hydrogels through the physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by the incorporation with materials is discussed. Meanwhile, the excellent properties of peptide hydrogels such as the stimulus responsiveness, biocompatibility, antimicrobial properties, rheology, and stability are reviewed. Finally, the application of peptide hydrogel in the food field is summarized and prospected.

De Novo Design of a Versatile Peptide-Based Coating to Impart Targeted Functionality at the Surface of Native Polystyrene

Peptide sequence periodicity is a simple design tool that can be used to generate functional peptide-based surface coatings. De novo-designed peptide N₃-PEG-VK16 is characterized by a hydrophobic periodicity of two that avidly binds to native polystyrene priming its surface for subsequent targeted functionalization via chemical ligation. The peptidic portion of N₃-PEG-VK16 is responsible for surface binding, converting polystyrene's hydrophobic surface into a wettable and electrostatically charged environment that facilitates cell attachment. Native polystyrene surfaces are coated by simple peptide adsorption from an aqueous buffered solution, and the resulting primed surface is easily functionalized by cycloaddition chemistry. Herein, we show that ligating a vitronectin-derived peptide to primed polystyrene surfaces enables adhesion, expansion, long-term culture, and phenotype maintenance of human induced pluripotent stem cells. To demonstrate scope, we also show that additional functional ligands can be used, for example, nerve growth factor protein, to control neurite outgrowth.

Three-Dimensional Sulfated Bacterial Cellulose/Gelatin Composite Scaffolds for Culturing Hepatocytes

The liver is the hub of human metabolism and involves many diseases. To better work on the mechanism and treatment of liver diseases, it is of particular interest to design 3-dimensional scaffolds suitable for culturing hepatocytes in vitro to simulate their metabolic and regenerative abilities. In this study, sulfated bacterial cellulose (SBC) was prepared as the building block of cell scaffolds, motivated by the anionic nature and 3-dimensional structure of hepatic extracellular matrix, and its reaction condition for sulfate esterification was optimized by changing the reaction time. The analysis and study of the microscopic morphology, structure, and cytocompatibility of SBCs showed that they possess good biocompatibility and meet the requirements for tissue engineering. Next, SBC was mixed with gelatin for composite scaffolds (SBC/Gel) for culturing hepatocytes by homogenization and freeze-drying methods, whose physical properties such as pore size, porosity, and compression properties were compared with gelatin (Gel) scaffolds as the control group, and the cytological activity and hemocompatibility of the composite scaffolds were investigated. The results showed that the SBC/Gel composite has better porosity and compression properties, as well as good cytocompatibility and hemocompatibility, and could be applied to 3-dimensional culture of hepatocytes for drug screening or liver tissue engineering.

Advances in Peptide-Based Hydrogel for Tissue Engineering

The development of peptide-based materials has emerged as one of the most challenging aspects of biomaterials in recent years. It has been widely acknowledged that peptide-based materials can be used in a broad range of biomedical applications, particularly in tissue engineering. Among them, hydrogels have been attracting considerable interest in tissue engineering because they mimic tissue formation conditions by providing a three-dimensional environment and a high water content. It has been found that peptide-based hydrogels have received more attention due to mimicking proteins, particularly extracellular matrix proteins, as well as the wide variety of applications they are capable of serving. It is without a doubt that peptide-based hydrogels have become the leading biomaterials of today owing to their tunable mechanical stability, high water content, and high biocompatibility. Here, we discuss in detail various types of peptide-based materials, emphasizing peptide-based hydrogels, and then we examine in detail how hydrogels are formed, paying particular attention to the peptide structures that are incorporated into the final structure. Following that, we discuss the self-assembly and formation of hydrogels under various conditions, as well as the parameters to be considered as critical factors, which include pH, amino acid composi- tion within the sequence, and cross-linking techniques. Further, recent studies on the development of peptide-based hydrogels and their applications in tissue engineering are reviewed.

Modulation of hydrogel networks by metal ions

Self-assembling hydrogels are receiving great attention for both biomedical and technological applications. Self-assembly of protein/peptides as well as organic molecules is commonly induced in response to external triggers such as changes of temperature, concentration, or pH. An interesting strategy to modulate the morphology and mechanical properties of the gels implies the use of metal ions, where coordination bonds regulate the dynamic cross-linking in the construction of hydrogels, and coordination geometries, catalytic, and redox properties of metal ions play crucial roles. This review aims to discuss recent insights into the supramolecular assembly of hydrogels involving metal ions, with a focus on self-assembling peptides, as well as applications of metallogels in biomedical fields including tissue engineering, sensing, wound healing, and drug delivery.

Injectable Peptide Hydrogel Encapsulation of Mesenchymal Stem Cells Improved Viability, Stemness, Anti-Inflammatory Effects, and Early Stage Wound Healing

Human-adipose-derived mesenchymal stem cells (hADMSCs) are adult stem cells and are relatively easy to access compared to other sources of mesenchymal stem cells (MSCs). They have shown immunomodulation properties as well as effects in improving tissue regeneration. To better stimulate and preserve the therapeutic properties of hADMSCs, biomaterials for cell delivery have been studied extensively. To date, hyaluronic acid (HA)-based materials have been most widely adopted by researchers around the world. PGmatrix is a new peptide-based hydrogel that has shown superior functional properties in 3D cell cultures. Here, we reported the in vitro and in vivo functional effects of PGmatrix on hADMSCs in comparison with HA and HA-based Hystem hydrogels. Our results showed that PGmatrix was far superior in maintaining hADMSC viability during prolonged incubation and stimulated expression of SSEA4 (stage-specific embryonic antigen-4) in hADMSCs. hADMSCs encapsulated in PGmatrix secreted more immune-responsive proteins than those in HA or Hystem, though similar VEGF-A and TGFβ1 release levels were observed in all three hydrogels. In vivo studies revealed that hADMSCs encapsulated with PGmatrix showed improved skin wound healing in diabetic-induced mice at an early stage, suggesting possible anti-inflammatory effects, though similar re-epithelialization and collagen density were observed among PGmatrix and HA or Hystem hydrogels by day 21.

Gram-selective antibacterial peptide hydrogels

The human microbiome plays fundamental roles in human health and disease. However, widely used broad-spectrum antibiotics severely disrupt human-related microbial communities, eventually leading to resistant bacteria, posing a growing threat to global medical health. Antimicrobial peptides (AMPs) are promising antimicrobial agents that barely cause bacterial resistance. Excellent broad-spectrum antimicrobial activities have been achieved using hydrogels self-assembled from AMPs, but there is still a lack of AMP hydrogels that can target Gram-positive and Gram-negative bacteria. Herein, several hydrogels self-assembled from AMPs, termed IK1, IK3, and IK4, were designed and synthesized. In vitro antibacterial results indicated that the IK1 and IK4 hydrogels specifically targeted Gram-positive and Gram-negative bacteria, respectively, while the IK3 hydrogel targeted both Gram-positive and Gram-negative bacteria. The desired broad-spectrum or Gram-selective AMP hydrogels are believed to be obtained through the rational design of the hydrophilicity, hydrophobicity, and charge properties of the peptide molecules. Good in vivo Gram-selective antibacterial properties and the ability to promote wound healing have been demonstrated via treating mouse wound models with these AMP hydrogels. We believe that these Gram-selective AMP hydrogels could potentially have important applications in treating common recurring infections.

RGDX1 X2 motif regulates integrin αvβ5 binding for pluripotent stem cell adhesion

The arginine-glycine-aspartic acid (RGD) motif is a cell adhesion sequence that binds to integrins. Some RGD-containing peptides promote adhesion of both embryonic stem cells and induced pluripotent stem cells (iPSCs); however, not all such RGD-containing peptides are active. In this study, we elucidated the role of RGD-neighboring sequences on iPSC adhesion using diverse synthetic peptides and recombinant proteins. Our results indicate that iPSC adhesion requires RGDX₁ X₂  sequences, such as RGDVF and RGDNY, and that the X₁ X₂ residues are essential for the adhesion via integrin αvβ5 but not αvβ3. iPSCs express integrin αvβ5 but not αvβ3; therefore, iPSC adhesion requires the RGDX₁ X₂ -containing sequences. The importance of the X₁ X₂ residues was confirmed with both HeLa and A549 cells, which express integrin αvβ5 but not αvβ3. Analysis of RGD-neighboring sequences provides important insights into ligand-binding specificity of integrins. Identification of integrin αvβ5-binding motifs is potentially useful in drug development, drug delivery, cell culture, and tissue engineering.

Biomaterials via peptide assembly: Design, characterization, and application in tissue engineering

A core challenge in biomaterials, with both fundamental significance and technological relevance, concerns the rational design of bioactive microenvironments. Designed properly, peptides can undergo supramolecular assembly into dynamic, physical hydrogels that mimic the mechanical, topological, and biochemical features of native tissue microenvironments. The relatively facile, inexpensive, and automatable preparation of peptides, coupled with low batch-to-batch variability, motivates the expanded use of assembling peptide hydrogels for biomedical applications. Integral to realizing dynamic peptide assemblies as functional biomaterials for tissue engineering is an understanding of the molecular and macroscopic features that govern assembly, morphology, and biological interactions. In this review, we first discuss the design of assembling peptides, including primary structure (sequence), secondary structure (e.g., α-helix and β-sheets), and molecular interactions that facilitate assembly into multiscale materials with desired properties. Next, we describe characterization tools for elucidating molecular structure and interactions, morphology, bulk properties, and biological functionality. Understanding of these characterization methods enables researchers to access a variety of approaches in this ever-expanding field. Finally, we discuss the biological properties and applications of peptide-based biomaterials for engineering several important tissues. By connecting molecular features and mechanisms of assembling peptides to the material and biological properties, we aim to guide the design and characterization of peptide-based biomaterials for tissue engineering and regenerative medicine. STATEMENT OF SIGNIFICANCE: Engineering peptide-based biomaterials that mimic the topological and mechanical properties of natural extracellular matrices provide excellent opportunities to direct cell behavior for regenerative medicine and tissue engineering. Here we review the molecular-scale features of assembling peptides that result in biomaterials that exhibit a variety of relevant extracellular matrix-mimetic properties and promote beneficial cell-biomaterial interactions. Aiming to inspire and guide researchers approaching this challenge from both the peptide biomaterial design and tissue engineering perspectives, we also present characterization tools for understanding the connection between peptide structure and properties and highlight the use of peptide-based biomaterials in neural, orthopedic, cardiac, muscular, and immune engineering applications.

Direct observation of peptide hydrogel self-assembly

The characterization of self-assembling molecules presents significant experimental challenges, especially when associated with phase separation or precipitation. Transparent window infrared (IR) spectroscopy leverages site-specific probes that absorb in the “transparent window” region of the biomolecular IR spectrum. Carbon–deuterium (C–D) bonds are especially compelling transparent window probes since they are non-perturbative, can be readily introduced site selectively into peptides and proteins, and their stretch frequencies are sensitive to changes in the local molecular environment. Importantly, IR spectroscopy can be applied to a wide range of molecular samples regardless of solubility or physical state, making it an ideal technique for addressing the solubility challenges presented by self-assembling molecules. Here, we present the first continuous observation of transparent window probes following stopped-flow initiation. To demonstrate utility in a self-assembling system, we selected the MAX1 peptide hydrogel, a biocompatible material that has significant promise for use in drug delivery and medical applications. C–D labeled valine was synthetically introduced into five distinct positions of the twenty-residue MAX1 β-hairpin peptide. Consistent with current structural models, steady-state IR absorption frequencies and linewidths of C–D bonds at all labeled positions indicate that these side chains occupy a hydrophobic region of the hydrogel and that the motion of side chains located in the middle of the hairpin is more restricted than those located on the hairpin ends. Following a rapid change in ionic strength to initiate self-assembly, the peptide absorption spectra were monitored as function of time, allowing determination of site-specific time constants. We find that within the experimental resolution, MAX1 self-assembly occurs as a cooperative process. These studies suggest that stopped-flow transparent window FTIR can be extended to other time-resolved applications, such as protein folding and enzyme kinetics.

To facilitate the characterization of phase-transitioning molecules, site-specific non-perturbative infrared probes are leveraged for continuous observation of the self-assembly of fibrils in a peptide hydrogel following stopped-flow initiation.

Peptide hydrogels for affinity-controlled release of therapeutic cargo: Current and potential strategies

The development of devices for the precise and controlled delivery of therapeutics has grown rapidly over the last few decades. Drug delivery materials must provide a depot with delivery profiles that satisfy pharmacodynamic and pharmacokinetic requirements resulting in clinical benefit. Therapeutic efficacy can be limited due to short half-life and poor stability. Thus, to compensate for this, frequent administration and high doses are often required to achieve therapeutic effect, which in turn increases potential side effects and systemic toxicity. This can potentially be mitigated by using materials that can deliver drugs at controlled rates, and material design principles that allow this are continuously evolving. Affinity-based release strategies incorporate a myriad of reversible interactions into a gel network, which have affinities for the therapeutic of interest. Reversible binding to the gel network impacts the release profile of the drug. Such affinity-based interactions can be modulated to control the release profile to meet pharmacokinetic benchmarks. Much work has been done developing affinity-based control in the context of polymer-based materials. However, this strategy has not been widely implemented in peptide-based hydrogels. Herein, we present recent advances in the use of affinity-controlled peptide gel release systems and their associated mechanisms for applications in drug delivery.

Bioinspired short peptide hydrogel for versatile encapsulation and controlled release of growth factor therapeutics

A short bioinspired octapeptide, GV8, can self-assemble under mild conditions into biodegradable supramolecular physical hydrogels with high storage modulus and good biocompatibility. GV8 hydrogels can encapsulate both single or multiple macromolecular protein-based therapeutics in a simple one-pot formulation manner, making it a promising candidate to address challenges faced by existing synthetic polymer or peptide hydrogels with complex gelation and drug-encapsulation processes. Alongside its versatility, the hydrogel exhibits concentration-dependent storage modulus and controlled drug-release action. We demonstrate that GV8 hydrogels loaded with adipose-derived mesenchymal stem cells (ADMSC) secretome remain mechanically robust, and exhibit promising potential for wound healing applications by preserving secretome activity while maintaining a constant supply of ADMSC secretome to promote epithelial cell migration. Overall, our work highlights the potential of GV8 peptide hydrogel as a versatile and safe carrier for encapsulation and delivery of macromolecular therapeutics. STATEMENT OF SIGNIFICANCE: Supramolecular peptide hydrogels are a popular choice for protein-based macromolecular therapeutics delivery; however, despite the development of abundant hydrogel systems, several challenges limit their adaptability and practical applications. GV8 short peptide hydrogel circumvents these drawbacks and demonstrates the ability to function as a versatile growth factor (GF) encapsulant. It can encapsulate precise concentrations of complex adipose-derived mesenchymal stem cells secretome mixtures with a one-pot formulation approach and perform controlled release of GFs with preserved activity without compromising the self-assembly and mechanical properties of the hydrogel's supramolecular network. The significance of GV8 hydrogel lies in its gelation simplicity and versatility to encapsulate and deliver macromolecular therapeutics, thus representing a promising biomaterial for regenerative medicine applications.

From structure to application: Progress and opportunities in peptide materials development

For over 20 years, peptide materials in their hydrogel or soluble fibril form have been used for biomedical applications such as drug delivery, cell culture, vaccines, and tissue regeneration. To facilitate the translation of these materials, key areas of research still need to be addressed. Their structural characterization lags compared to amyloid proteins. Many of the structural features designed to guide materials formation are primarily being characterized by their observation in atomic resolution structures of amyloid assemblies. Herein, these motifs are examined in relation to peptide designs identifying common interactions that drive assembly and provide structural specificity. Current efforts to design complex structures, as reviewed here, highlight the need to extend the structural revolution of amyloid proteins to peptide assemblies to validate design principles. With respect to clinical applications, the fundamental interactions and responses of proteins, cells, and the immune system to peptide materials are still not well understood. Only a few trends are just now emerging for peptide materials interactions with biological systems. Understanding how peptide material properties influence these interactions will enable the translation of materials towards current and emerging applications.

Improvement of wound healing by the development of ECM-inspired biomaterial coatings and controlled protein release

Implant design has evolved from biochemically inert substrates, minimizing cell and protein interaction, towards sophisticated bioactive substrates, modulating the host response and supporting the regeneration of the injured tissue. Important aspects to consider are the control of cell adhesion, the discrimination of bacteria and non-local cells from the desired tissue cell type, and the stimulation of implant integration and wound healing. Here, the extracellular matrix acts as a role model providing us with inspiration for sophisticated designs. Within this scope, small bioactive peptides have proven to be miscellaneously deployable for the mediation of surface, cell and matrix interactions. Combinations of adhesion ligands, proteoglycans, and modulatory proteins should guide multiple aspects of the regeneration process and cooperativity between the different extracellular matrix components, which bears the chance to maximize the therapeutic efficiency and simultaneously lower the doses. Hence, efforts to include multiple of these factors in biomaterial design are well worth. In the following, multifunctional implant coatings based on bioactive peptides are reviewed and concepts to implement strong surface anchoring for stable cell adhesion and a dynamic delivery of modulator proteins are discussed.

Self-assembling peptides as vectors for local drug delivery and tissue engineering applications

Molecular self-assembly has forged a new era in the development of advanced biomaterials for local drug delivery and tissue engineering applications. Given their innate biocompatibility and biodegradability, self-assembling peptides (SAPs) have come in the spotlight of such applications. Short and water-soluble SAP biomaterials associated with enhanced pharmacokinetic (PK) and pharmacodynamic (PD) responses after the topical administration of the therapeutic systems, or improved regenerative potential in tissue engineering applications will be the focus of the current review. SAPs are capable of generating supramolecular structures using a boundless array of building blocks, while peptide engineering is an approach commonly pursued to encompass the desired traits to the end composite biomaterials. These two elements combined, expand the spectrum of SAPs multi-functionality, constituting them potent biomaterials for use in various biomedical applications.

Defining the Landscape of the Pauling-Corey Rippled Sheet: An Orphaned Motif Finding New Homes

When peptides are mixed with their mirror images in an equimolar ratio, two-dimensional periodic structural folds can form, in which extended peptide strands are arrayed with alternating chirality. The resultant topography class, termed the rippled β-sheet, was introduced as a theoretical concept by Pauling and Corey in 1953. Unlike other fundamental protein structural motifs identified around that time, including the α-helix and the pleated β-sheet, it took several decades before conclusive experimental data supporting the proposed rippled β-sheet motif were gained. Much of the key experimental evidence was provided over the course of the past decade through the concurrent efforts of our three laboratories. Studies that focused on developing new self-assembling hydrogel materials have shown that certain amphiphilic peptides form fibrils and hydrogel networks that are more rigid and have a higher thermodynamic stability when made from racemic peptide mixtures as opposed to pure enantiomers. Related interrogation of assemblies composed of mixtures of l- and d-amphiphilic peptides confirmed that the resulting fibrils were composed of alternating l/d peptides consistent with rippled β-sheets. It was also demonstrated that mirror-image amyloid beta (Aβ) could act as a molecular chaperone to promote oligomer-to-fibril conversion of the natural Aβ enantiomer, which was found to reduce Aβ neurotoxicity against different neuronal cell models. With a cross-disciplinary approach that combines experiment and theory, our three laboratories have demonstrated the unique biophysical, biochemical, and biological properties that arise upon mixing of peptide enantiomers, in consequence of rippled β-sheet formation. In this Account, we give an overview of the early history of the rippled β-sheet and provide a detailed structural description/definition of this motif relative to the pleated β-sheet. We then summarize the key findings, obtained on three unique sets of aggregating mirror-image peptide pairs through independent efforts of our three laboratories, and use these results to delineate the landscape of the rippled β-sheet structural motif to inspire future studies. Peptide sequence parameters that favor rippled β-sheet assembly are described, along with the accompanying kinetic and thermodynamic properties, as well as the resulting emergent physical properties of the assemblies. The Account then concludes with a brief overview of some key unresolved challenges in this nascent field. There is much potential for future applications of this unique supramolecular motif in the realm of materials design and biomedical research. We hope this Account will stimulate much-needed discussion of this fascinating structural class to eventually produce a fully quantitative, rational framework for the molecular engineering of rippled β-sheets in the future.

Self-assembling peptide-based hydrogels: Fabrication, properties, and applications

The hierarchical formation of self-assembling peptide-based hydrogels (SAPHs) starts from peptide to nanofibers, following with the entanglement into hydrogels with nanofibrous network. Such characteristic structure and extraordinary biocompatibility, and the peptide components endow the SAPHs with diverse applications in biotechnological field. Therefore, the thorough comprehension of SAPHs is significant to broadening their application. In this review, fabrication, properties, and biological applications of the SAPHs are introduced, and the factors influencing the synthesis process as well as the properties of the SAPHs products are also systematically explained. Meanwhile, we conclude the problems to be solved and provide our perspective to the future development of SAPHs in the biotechnology.

Serum Protein Adsorption Modulates the Toxicity of Highly Positively Charged Hydrogel Surfaces

Hydrogels formed from peptide self-assembly are a class of materials that are being explored for their utility in tissue engineering, drug and cell delivery, two- and three-dimensional cell culture, and as adjuvants in surgical procedures. Most self-assembled peptide gels can be syringe-injected in vivo to facilitate the local delivery of payloads, including cells, directly to the targeted tissue. Herein, we report that highly positively charged peptide gels are inherently toxic to cells, which would seem to limit their utility. However, adding media containing fetal bovine serum, a common culture supplement, directly transforms these toxic gels into cytocompatible materials capable of sustaining cell viability even in the absence of added nutrients. Multistage mass spectrometry showed that at least 40 serum proteins can absorb to a gel's surface through electrostatic attraction ameliorating its toxicity. Further, cell-based studies employing model gels having only bovine serum albumin, fetuin-A, or vitronectin absorbed to the gel surface showed that single protein additives can also be effective depending on the identity of the cell line. Separate studies employing these model gels showed that the mechanism(s) responsible for mitigating apoptosis involve both the pacification of gel surface charge and adsorbed protein-mediated cell signaling events that activate both the PI3/Akt and MAPK/ERK pathways which are known to facilitate resistance to stress-induced apoptosis and overall cell survival.

The impact of thermal history on the structure of glycylalanylglycine ethanol/water gels

This work revisits several open questions regarding the mechanisms of GAG fibril formation and structure as a function of temperature. The authors recently hypothesized that there is a solubility limit of GAG in ethanol/water that induces self-assembly. In other words, not all peptides can participate in fibrillization and some fraction is still soluble in solution. We show via FTIR spectroscopy that, indeed, free peptides are still present in solution after fibril formation, strongly supporting the solubility model. Furthermore, previous work showed GAG self-assembled into right-handed (phase I) or left-handed (phase II) chiral structures depending on temperature. In this study, we analyze the crystalline structure of phase I and II gels via WAXS and SAXS to compare their crystalline structures and order. Rheological measurements were used to investigate the response of the fibrillar network to temperature. They reveal that the ability of the peptide to self-assemble depends on the solubility at a given temperature and not on thermal history. Furthermore, the gel softening point, the linear viscoelastic gel microstructure, and relaxation spectrum are very similar between phase I and phase II. Overall, the temperature only affects the chirality of the fibrils and the formation kinetics.

Reversible crosslinked assembly of a trimeric coiled-coil peptide into a three-dimensional matrix for cell encapsulation and release

Mimicking the extracellular matrix (ECM) continues to be a goal in the field of regenerative medicine. Herein, we report a modified trimeric GCN4 coiled-coil sequence containing three ligands for metal ions specifically positioned for crosslinked assembly (TriCross). In the presence of metal ions, TriCross assembles into a three-dimensional (3D) matrix with significant cavities to accommodate cells. The matrix was found to be stable in media with serum, and mild removal of the metal leads to disassembly. By assembling TriCross with a suspension of cells in media, the matrix encapsulates cells during the assembly process leading to high cell viability. Further disassembly under mild conditions allows for the release of cells from the scaffold. As such, this peptide-based material displays many of the characteristics necessary for successful 3D cell culture.

Design of RGDS Peptide-Immobilized Self-Assembling β-Strand Peptide from Barnacle Protein

We designed three types of RGD-containing barnacle adhesive proteins using self-assembling peptides. In the present study, three types of RGD-containing peptides were synthesized by solid-phase peptide synthesis, and the secondary structures of these peptides were analyzed by CD and FT-IR spectroscopy. The mechanical properties of peptide hydrogels were characterized by a rheometer. We discuss the correlation between the peptide conformation, and cell attachment and cell spreading activity from the viewpoint of developing effective tissue engineering scaffolds. We created a peptide-coated cell culture substrate by coating peptides on a polystyrene plate. They significantly facilitated cell adhesion and spreading compared to a non-coated substrate. When the RGDS sequence was modified at N- or C-terminal of R-Y, it was found that the self-assembling ability was dependent on the strongly affects hydrogel formation and cell adhesion caused by its secondary structure.

Supramolecular Biopolymers for Tissue Engineering

Supramolecular biopolymers (SBPs) are those polymeric units derived from macromolecules that can assemble with each other by noncovalent interactions. Macromolecular structures are commonly found in living systems such as proteins, DNA/RNA, and polysaccharides. Bioorganic chemistry allows the generation of sequence-specific supramolecular units like SBPs that can be tailored for novel applications in tissue engineering (TE). SBPs hold advantages over other conventional polymers previously used for TE; these materials can be easily functionalized; they are self-healing, biodegradable, stimuli-responsive, and nonimmunogenic. These characteristics are vital for the further development of current trends in TE, such as the use of pluripotent cells for organoid generation, cell-free scaffolds for tissue regeneration, patient-derived organ models, and controlled delivery systems of small molecules. In this review, we will analyse the 3 subtypes of SBPs: peptide-, nucleic acid-, and oligosaccharide-derived. Then, we will discuss the role that SBPs will be playing in TE as dynamic scaffolds, therapeutic scaffolds, and bioinks. Finally, we will describe possible outlooks of SBPs for TE.

Current Progress in Cross-Linked Peptide Self-Assemblies

Peptide-based fibrous supramolecular assemblies represent an emerging class of biomaterials that can realize various bioactivities and structures. Recently, a variety of peptide fibers with attractive functions have been designed together with the discovery of many peptide-based self-assembly units. Cross-linking of the peptide fibers is a key strategy to improve the functions of these materials. The cross-linking of peptide fibers forming three-dimensional networks in a dispersion can lead to changes in physical and chemical properties. Hydrogelation is a typical change caused by cross-linking, which makes it applicable to biomaterials such as cell scaffold materials. Cross-linking methods, which have been conventionally developed using water-soluble covalent polymers, are also useful in supramolecular peptide fibers. In the case of peptide fibers, unique cross-linking strategies can be designed by taking advantage of the functions of amino acids. This review focuses on the current progress in the design of cross-linked peptide fibers and their applications.

Advances in the Application of Supramolecular Hydrogels for Stem Cell Delivery and Cartilage Tissue Engineering

Cartilage defects pose a great threat to the health of the aging population. Cartilage has limited self-regeneration ability because it lacks blood vessels, nerves and lymph. To achieve efficient cartilage regeneration, supramolecular hydrogels are used in medical applications and tissue engineering as they are tunable and reversible in nature. Moreover, they possess supramolecular interactions which allow the incorporation of cells. These hydrogels present great potential for tissue engineering-based therapies. This review presents advances in the development of stem cell-laden supramolecular hydrogels. We discuss new possibilities for stem cell therapy and their uses in cartilage tissue engineering. Gray areas and future perspectives are discussed.

Sequence-Dependent Bioactivity and Self-Assembling Properties of RGD-Containing Amphiphilic Peptides as Extracellular Scaffolds

Cell adhesion is a fundamental biological process involved in a wide range of cellular and biological activity. Integrin-ligand binding is largely responsible for cell adhesion with an extracellular matrix, and the RGD sequence is an epitope in ligand proteins such as fibronectin. The extracellular matrix consists of fibrous proteins with embedded ligands for integrins. Such a biological architecture has been reconstructed for biochemical, pharmaceutical, and biomaterial studies using artificial supramolecular systems to reproduce cell adhesion functionality, and fiber-forming self-assembling peptides containing RGD are one such promising material for this purpose. In this study, using RADA16 as a model fiber-forming peptide, a series of RGD-containing variants have been synthesized by the replacement of one alanine with glycine at different positions, in which all the variants consist of identical amino acid components. The position of the RGD unit influenced the supramolecular self-assembly of the amphiphilic peptide to inhibit β-sheet formation (A6G) or twist the molecular alignment in β-sheet-type assemblies (A10G and A14G). Furthermore, A10G and A14G formed assembled nanofibers, which afforded hydrogels with higher viscoelasticities than other RGD-containing variants. In contrast to A10G and A14G, which exhibit substantial cell adhesion functionality, the cell adhesion efficiencies of the other RGD-containing variants were significantly reduced. This suggests that the higher order structure could strongly influence the cell adhesion functionality of RGD-containing supramolecular nanofibers.

Recent trends in peptide and protein-based hydrogels

Hydrogels are classic examples of biomaterials that have found its niche in biomedical and allied fields. Here, we describe examples of peptide-based and protein-based hydrogels with a focus on smart gels that respond to various stimuli including temperature, pH, light, and ionic strength. With the recent advancements in computational modeling, it has been possible to predict as well as design peptide and protein sequences that can assemble into hydrogels with unique and improved properties. We briefly discuss coarse grained and atomistic simulations in designing peptides that can form hydrogels. In addition, we highlight the trends that will influence the future design and applications of hydrogels, with emphasis on bioadhesion, exosomes delivery, tissue and organoids engineering, and even intracellular production of gels.

Tuning the Supramolecular Structure and Function of Collagen Mimetic Ionic Complementary Peptides via Electrostatic Interactions

Collagen, the most abundant component of natural ECM, has attracted interest of scientific communities to replicate its multihierarchical self-assembling structure. Recent developments in collagen mimetic peptides were inclined toward the production of self-assembling short peptides capable of mimicking complex higher order structures with tunable mechanical properties. Here, we report for the first time, the crucial molecular design of oppositely charged collagen mimetic shortest bioactive pentapeptide sequences, as a minimalistic building block for development of next-generation biomaterials. Our rational design involves synthesis of two pentapeptides, where the fundamental molecular motif of collagen, that is, Gly-X-Y has been mutated at the central position with positively charged, lysine, and negatively charged, aspartate, residues. Depending on their overall surface charge, these peptides showed high propensity to form self-supporting hydrogel either at acidic or basic pH, which limits their biomedical applications. Interestingly, simple mixing of the two peptides was found to induce the coassembly of these designed peptides, which drives the formation of self-supporting hydrogel at physiological pH and thus enhanced the potential of exploring these peptides for biomedical purposes. This coassembly of ionic peptides was accompanied by the enhancement in the mechanical stiffness of the gels and reduction in overall zeta potential of the combined hydrogel, which provides the evidence for additional electrostatic interactions. Furthermore, the thixotropic nature of these gels offers an additional advantage of exploration of designer biomaterials as injectable gels. The nanofibers of coassembled hydrogel were found to be highly biocompatible to the fibroblast cells compared to the individual peptides, which was evident from their cytotoxicity studies. We anticipate that our rational design of ECM protein mimics in the form of short bioactive peptides will contribute significantly to the development of novel biomaterials and play a crucial role in the field of tissue engineering and regenerative medicines.

Drug-Mimicking Nanofibrous Peptide Hydrogel for Inhibition of Inducible Nitric Oxide Synthase

In this work, we develop a drug-mimicking nanofibrous peptide hydrogel that shows long-term bioactivity comparable to a small-molecule inhibitor of inducible nitric oxide synthase (iNOS). The iNOS inhibitor, N ⁶-(1-iminoethyl)-l-lysine (l-NIL), is a positively charged amino acid whose structure could be readily integrated into the framework of a positively charged multidomain peptide (MDP) through the modification of lysine side chains. This new l-NIL-MDP maintains the self-assembling properties of the base peptide, forming β-sheet nanofibers, which entangle into a thixotropic hydrogel. The l-NIL-MDP hydrogel supports cell growth in vitro and allows syringe-directed delivery that persists in a targeted location in vivo for several weeks. Multiple characterization assays demonstrate the bioactivity of the l-NIL-MDP hydrogel to be comparable to the l-NIL small molecule. This includes iNOS inhibition of macrophages in vitro, reduced nitrotyrosine immunostaining in murine subcutaneous histology, and reduced serum levels of vascular endothelial growth factor in vivo. This study expands the toolbox of available peptide hydrogel scaffold designs that can modify biological activity without the need for any additional small-molecule drugs, proteins, or cells.

Supramolecular and dynamic covalent hydrogel scaffolds: from gelation chemistry to enhanced cell retention and cartilage regeneration

This review highlights the most recent progress in gelation strategies of biomedical supramolecular and dynamic covalent crosslinking hydrogels and their applications for enhancing cell retention and cartilage regeneration.