Remote-Controlled Magnetic Sponge Balls and Threads for Oil/Water Separation in a Confined Space and Anaerobic Reactions

A Janus branch filter for washing machines: Simultaneous removal of microplastics and surfactants

Emerging pollutants, such as microplastics (MPs), are becoming a significant issue worldwide. The highest percentage of MPs released into the environment occurs through daily laundry. The average weight of dreg obtained from 5 kg of laundry was 1.26 g/kg. According to energy dispersive X-ray (EDX) and thermogravimetric analysis (TGA) analyses, the dreg consisted of MPs (78.3-89 wt%, organic elements: C/O) and alien materials (11-21.7 wt%, inorganic elements: Al/Fe/Ca, etc.). Thus, to reproduce the real environment, alien materials (Fe₃O₄ and CaCO₃) were added to various types of model MPs in the presence and absence of sodium dodecyl benzenesulfonate (SDBS) to test MP removal. Hydrophobic and hydrophilic MPs were generated upon laundering, accounting for 55-59% and 41-45% of MPs, respectively. We provide a novel approach to design a laundry filter system for the simultaneous removal of SDBS and hydrophilic/hydrophobic MPs.

Solar-Driven Unmanned Hazardous and Noxious Substance Trapping Devices Equipped with Reverse Piloti Structures and Cooling Systems

A solar-driven unmanned hazardous and noxious substance (HNS) trapping device that can absorb, evaporate, condense, and collect HNSs was prepared. The HNS trapping device was composed of three parts: a reverse piloti structure (RPS) for absorption and evaporation of HNSs, Al mirrors with optimized angles for focusing light, and a cooling line system for the condensation of HNSs. The RPS was fabricated by assembling a lower rectangle structure and an upper hollow column. The lower rectangular structure showed a toluene evaporation rate of 6.31 kg/m² h, which was significantly increased by the installation of the upper hollow column (11.21 kg/m² h) and led to the formation of the RPS. The installation of Al mirrors on the RPS could further enhance the evaporation rate by 9.1% (12.28 kg/m² h). The RPS system equipped with an Al mirror could rapidly remove toluene, xylene, and toluene–xylene with high evaporation rates (12.28–8.37 kg/m² h) and could effectively collect these substances with high efficiencies (81–65%) in an unmanned HNS trapping device. This prototype HNS trapping device works perfectly without human involvement, does not need electricity, and thus is suitable for fast cleanup and collection of HNSs in the ocean.

Hybrid Bead Air Filters with Low Pressure Drops at a High Flow Rate for the Removal of Particulate Matter and HCHO

A tower air filtration system was designed in which bead air filters (BAFs) were actively rotated by a fan motor to remove particulate matter (PM) or HCHO gas. Three types of BAF, hydrophilic, hydrophobic, and hybrid, were prepared and compared for the removal of PM and HCHO gas. A tower air filtration system loaded with hybrid BAFs purified 3.73 L of PM (2500 μg/m³ PM_2.5) at a high flow rate of 3.4 m/s with high removal efficiency (99.4% for PM_2.5) and a low pressure drop (19 Pa) in 6 min. Against our expectations, the PM_2.5 removal efficiency slightly increased as the air velocity increased. The hybrid BAF-200 showed excellent recyclability up to 50 cycles with high removal efficiencies (99.4-93.4% for PM_2.5). Furthermore, hydrophilic BAF-200 could permanently remove 3.73 L of HCHO gas (4.87 ppm) and return the atmosphere to safe levels (0.41-0.31 ppm) within 60 min without any desorption of HCHO gas.

2D and 3D Bulk Materials for Environmental Remediation: Air Filtration and Oil/Water Separation

Air and water pollution pose an enormous threat to human health and ecosystems. In particular, particulate matter (PM) and oily wastewater can cause serious environmental and health concerns. Thus, controlling PM and oily wastewater has been a great challenge. Various techniques have been reported to effectively remove PM particles and purify oily wastewater. In this article, we provide a review of the recent advancements in air filtration and oil/water separation using two- and three-dimensional (2D and 3D) bulk materials. Our review covers the advantages, characteristics, limitations, and challenges of air filters and oil/water separators using 2D and 3D bulk materials. In each section, we present representative works in detail and describe the concepts, backgrounds, employed materials, fabrication methods, and characteristics of 2D and 3D bulk material-based air filters and oil/water separators. Finally, the challenges, technical problems, and future research directions are briefly discussed for each section.

Polymer Capsules with Hydrophobic Liquid Cores as Functional Nanocarriers

Recent developments in the fabrication of core-shell polymer nanocapsules, as well as their current and future applications, are reported here. Special attention is paid to the newly introduced surfactant-free fabrication method of aqueous dispersions of nanocapsules with hydrophobic liquid cores stabilized by amphiphilic copolymers. Various approaches to the efficient stabilization of such vehicles, tailoring their cores and shells for the fabrication of multifunctional, navigable nanocarriers and/or nanoreactors useful in various fields, are discussed. The emphasis is placed on biomedical applications of polymer nanocapsules, including the delivery of poorly soluble active compounds and contrast agents, as well as their use as theranostic platforms. Other methods of fabrication of polymer-based nanocapsules are briefly presented and compared in the context of their biomedical applications.

Hydrophobic Magnetic Porous Material of Eichhornia crassipes for Highly Efficient Oil Adsorption and Separation

Many oil adsorption materials are composed of nonrenewable raw materials, and their disposal can increase resource consumption and cause new environmental pollution. In this paper, the carbonized Eichhornia crassipes (CEC) were immobilized with Fe₃O₄ magnetic nanoparticles and modified with 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOS) to prepare an oil adsorption material, referred to here as CEC/Fe₃O₄/PFOS. The magnetic and mechanical strength of the CEC was enhanced by adding Fe₃O₄ magnetic particles, which enable it efficient to dispose the oil/water solution. CEC/Fe₃O₄/PFOS shows high porosity (83.53%), low skeletal density (0.487 g/cm³), excellent magnetism, ultrahigh oil absorption capacity (49.94-140.90 g/g), hydrophobic performances with a water contact angle of 150.1 ± 2.3°, and a sliding angle of 10.5°. It is worth noting that the material can be recycled, and the absorbed oil is obtained by distillation. Therefore, this work may provide a candidate for solving the problem of oil pollution using E. crassipes.