Boosting the Photocatalytic Ability of g-C3N4 for Hydrogen Production by Ti3C2 MXene Quantum Dots

Recent progression in MXene-based catalysts for emerging photocatalytic applications of CO2 reduction and H2 production: A review

The development of advanced materials for efficient photocatalytic H2 production and CO2 reduction is highly recommended for addressing environmental issues and producing clean energy sources. Specifically, MXenes have emerged as two-dimensional (2D) materials extensively used as high-performance cocatalysts in photocatalyst systems owing to their outstanding features of structure and properties such as high conductivity, large specific surface area, and abundant active sites. Nevertheless, there is a lack of deep and systematic studies concerning the application of these emerging materials for CO2 reduction reaction (CRR) and H2 production (HER). This review first outlines the essential features of MXenes, encompassing the synthesis methods, composition, surface terminations, and electronic properties, which make them highly active as cocatalysts. It then examines the recent progress in MXene-based photocatalysts, emphasizing the synergy achieved by coupling MXenes as co-catalysts with semiconductors, utilizing MXenes as a support for the consistent growth of photocatalysts, leading to finely dispersed nanoparticles, and exploiting MXene as exceptional precursors for creating MXene/metal oxide photocomposite. The roles of engineering surface terminations of MXene cocatalysts, MXene quantum dots (QDs), and distinctive morphologies in MXenes-based photocatalyst systems to enhance photocatalytic activity for both HER and CRR have been explored both experimentally and theoretically using DFT calculations. Challenges and prospects for MXene-based photocatalysts are also addressed. Finally, suggestions for further research and development of effective and economical MXenes/semiconductors strategies are proposed. This comprehensive review article serves as a valuable reference for researchers for applying MXenes in photocatalysis.

Precise Layer-by-Layer Assembly of Dual Quantum Dots Artificial Photosystems Enabling Solar Water Oxidation

Quantum dots (QDs) colloidal nanocrystals are attracting enduring interest by scientific communities for solar energy conversion due to generic physicochemical merits including substantial light absorption coefficient, quantum confinement effect, enriched catalytically active sites, and tunable electronic structure. However, photo-induced charge carriers of QDs suffer from ultra-short charge lifespan and poor stability, rendering controllable vectorial charge modulation and customizing robust and stable QDs artificial photosystems challenging. Herein, tailor-made oppositely charged transition metal chalcogenides quantum dots (TMCs QDs) and MXene quantum dots (MQDs) are judiciously harnessed as the building blocks for electrostatic layer-by-layer assembly buildup on the metal oxides (MOs) framework. In these exquisitely designed LbL assembles MOs/(TMCs QDs/MQDs)n heterostructured photoanodes, TMCs QDs layer acts as light-harvesting antennas, and MQDs layer serves as electron-capturing mediator to relay cascade electrons from TMCs QDs to the MOs substrate, thereby yielding the spatially ordered tandem charge transport chain and contributing to the significantly boosted charge separation over TMCs QDs and solar water oxidation efficiency of MOs/(TMCs QDs/MQDs)n photoanodes. The relationship between interface configuration and charge transfer characteristics is unambiguously unlocked, by which photoelectrochemical mechanism is elucidated. This work would provide inspiring ideas for precisely mediating interfacial charge transfer pathways over QDs toward solar energy conversion.

Au/Ti3C2/g-C3N4 Ternary Composites Boost H2 Evolution Efficiently with Remarkable Long-Term Stability by Synergistic Strategies

The use of novel two-dimensional MXene materials and conventional g-C3N4 photocatalysts to fabricate the composites for hydrogen evolution reaction (HER) has attracted much attention, for which there is plenty of room for the enhancement of hydrogen evolution rates particularly under visible light and photostability. Herein, g-C3N4 was modified by copolymerization of malonamide and melamine and used to fabricate the ternary composites of Au particles and Ti3C2 MXene, and based on the synergistic effect, the composites enhanced the hydrogen evolution rates by 2.1, 99.8, and ∞ times compared with the unmodified g-C3N4 under UV, simulated sunlight, and visible light illumination, respectively. Moreover, the composite exhibited a sustained hydrogen evolution capacity in the cycle test for up to 120 h. Theoretical calculations and experimental results indicated that the hot electrons of Au are injected into the modified g-C3N4 and transferred to Ti3C2 simultaneously along with the photogenerated electrons of the modified g-C3N4 and then further transferred to Au, forming a photogenerated electron transfer channel of Au and modified g-C3N4 → Ti3C2 → Au within the composite. Ti3C2 acts as a bridge for fast separation of photogenerated electrons and holes on Au and modified g-C3N4, playing a key role in the enhanced photocatalytic performance. In addition, the visible light absorption ability of Au also positively contributed to the enhancement of visible light photocatalytic performance by providing hot electrons. Therefore, the selection of suitable cocatalysts for the design of composites is a crucial research direction to improve the photocatalytic performance and photostability of photocatalysts.

Biomass carbon and Ti2C3MXene quantum dots as ratiometric fluorescent probes for sensitive detecting malachite green in fish sample

A visual detection method for malachite green (MG) in food was established based on 'double-response-OFF' ratiometric fluorescent paper-based sensor. Biomass carbon quantum dots (BCQDs) using broad bean shell, and Ti3C2MXene quantum (MQDs) dots modified by ethylenediamine were synthesized by solvothermal method. The MG and two kinds of quantum dots could undergo static quenching, and the fluorescence color of two kinds of quantum dots gradually changed from red to blue, eventually the fluorescence was quenched, and the pattern had a two-stage linear relationship using fluorescent spectrofluorometer in the range of 0.1-140.0μM and the detection limit of 0.07μM. On this basis, a BCQDs/MQDs ratiometric fluorescence paper-based sensor was constructed and applied to fish sample. Through mobile phone software-Color recognizer, RGB values of fluorescent paper-based sensor at various concentrations of MG were extracted. The results showed that MG concentration was linearly correlated withR' value of RGB in the range of 20.0-140.0μM with 16.5μM detection limit. The method had been applied to the determination of canned fish and fresh basa fish samples, and the recovery rates were 97.33%-108.93% and 96.04%-117.97%, respectively. It proved that the ratiometric fluorescent paper-based sensor could be used for the rapid visual quantitative detecting MG in real samples.

Earthworms mediate the influence of polyethylene (PE) and polylactic acid (PLA) microplastics on soil bacterial communities

There is a growing body of evidence that suggests that both biodegradable and conventional (non-degradable) microplastics (MP) are hazardous to soil health by affecting the delivery of key ecological functions such as litter decomposition, nutrient cycling and water retention. Specifically, soil fauna may be harmed by the presence of MPs while also being involved in their disintegration, degradation, migration and transfer in soil. Therefore, a comprehensive understanding of the interactions between MPs and soil fauna is essential. Here, we conducted a 120-day soil microcosm experiment applying polyethylene (PE) and polylactic acid (PLA), in the absence/presence of the earthworm Eisenia nordenskioldi to estimate the relative singular and combined impact of MPs and earthworms on the soil bacterial community. Our findings revealed contrasting effects of PE and PLA on the composition and diversity of soil bacteria. All treatments affected the community and network structure of the soil bacterial community. Compared to the control (no MPs or earthworms), PE decreased bacterial alpha diversity, while PLA increased it. Patescibacteria were found to be significantly abundant in the PE group whereas Actinobacteria and Gemmatimonadetes were more abundant in PE, and PLA and earthworms groups. The presence of earthworms appeared to mediate the impact of PE/PLA on soil bacteria, potentially through bacterial consumption or by altering soil properties (e.g., pH, aeration, C availability). Earthworm presence also appeared to promote the chemical aging of PLA. Collectively, our results provide novel insights into the soil-fauna-driven impact of degradable/nondegradable MPs exposure on the long-term environmental risks associated with soil microorganisms.

In situ synthesis of g-C3N4/Ti3C2Tx nano-heterostructures for enhanced photocatalytic H2 generation via water splitting

Herein, we demonstrated the in situ synthesis of g-C3N4/Ti3C2Tx nano-heterostructures for hydrogen generation under UV visible light irradiation. The formation of the g-C3N4/Ti3C2Tx nano-heterostructures was confirmed via powder X-ray diffraction and supported by XPS. The FE-SEM images indicated the formation of layered structures of MXene and g-C3N4. HR-TEM images and SAED patterns confirmed the presence of g-C3N4 together with Ti3C2Tx nanosheets, i.e., the formation of nano-heterostructures of g-C3N4/Ti3C2Tx. The absorption spectra clearly showed the distinct band gaps of g-C3N4 and Ti3C2Tx in the nano-heterostructure. The increase in PL intensity and broadening of the peak with an increase in g-C3N4 indicated the suppression of electron-hole recombination. Furthermore, the nano-heterostructure was used as a photocatalyst for H2 generation from water and methylene blue dye degradation. The highest H2 evolution (1912.25 μmol/0.1 g) with good apparent quantum yield (3.1%) and an efficient degradation of MB were obtained for gCT-0.75, which was much higher compared to that of the pristine materials. The gCT-0.75 nano-heterostructure possessed a high surface area and abundant vacancy defects, facilitating the separation of charge carriers, which was ultimately responsible for this high photocatalytic activity. Additionally, TRPL clearly showed a higher decay time, which supports the enhancement in the photocatalytic activity of the gCT-0.75 nano-heterostructure. The nano-heterostructure with the optimum concentration of g-C3N4 formed a hetero-junction with the linked catalytic system, which facilitated efficient charge carrier separation also responsible for the enhanced photocatalytic activity.

Efficient Photocatalytic CO2 Reduction with High Selectivity for Ethanol by Synergistically Coupled MXene-Ceria and the Charge Carrier Dynamics

The primary factors that govern the selectivity and efficacy of CO2 photoreduction are the degree of activation of CO2 on the active surface sites of photocatalysts and charge separation/transfer kinetics. In this context, the rational synthesis of heterostructured MXene-coupled CeO2-based photocatalysts with different loading concentrations of Ti3C2MXene via a one-step hydrothermal approach has been undertaken. These photocatalysts exhibit a shift in X-ray diffraction peaks to higher 2θ values and changes in stretching vibrations of 5 wt % Ti3C2MXene/CeO2(5-TC/Ce) that indicate interaction between Ti3C2MXene and CeO2. Moreover, XPS analysis confirms the presence of the Ce3+/Ce4+ states. A sharp band at 2335 cm-1 observed during the CO2 photoreduction process corresponds to bidentate b-CO32-, which facilitates the adsorption of CO2 at the surface of the catalyst as revealed by the TPD analysis. Furthermore, the Schryvers test and NMR analysis were undertaken to confirm the formaldehyde intermediate formation during CO2 photoreduction to C2H5OH. The decrease in emission intensity, reduced lifetimes (2.68 ns), and lower interfacial resistance, as revealed by PL, TR-PL, and EIS analysis, imply an efficient charge separation and charge transfer in the case of the Ti3C2MXene/CeO2 heterojunction. The decrease in the intensity of peaks in the EPR spectrum in the case of 5-TC/Ce further confirms efficient charge transfer kinetics across the interface. The optimized 5-TC/Ce shows CO2 reduction with a drastically enhanced yield of ethanol on the order of 6127 μmol g-1 at 5 h with 98% selectivity and 7.54% apparent quantum efficiency, which is 6-fold higher than that of ethanol produced by bare CeO2. Herein, CeO2 that acts as a redox couple (Ce3+/Ce4+) when coupled with MXene having a metallic nature that reduces the electron transfer resistance is in unison, enabling an enhanced mobilization of electrons. Thereby, the synergistic coupling of Ti3C2MXene with CeO2 leads to an efficient photoreduction of CO2 under visible light illumination.

Recent developments and perspectives of MXene-Based heterostructures in photocatalysis

Energy crises and environmental degradation are serious in recent years. Inexhaustible solar energy can be used for photocatalytic hydrogen production or CO2 reduction to reduce CO2 emissions. At present, the development of efficient photocatalysts is imminent. MXene as new two-dimensional (2D) layered material, has been used in various fields in recent years. Based on its high conductivity, adjustable band gap structure and sizable specific surface area, the MXene is beneficial to hasten the separation and reduce the combination of photoelectron-hole pairs in photocatalysis. Nevertheless, the re-stacking of layers because of the strong van der Waals force and hydrogen bonding interactions seriously hinder the development of MXene material as photocatalysts. By contrast, the MXene-based heterostructures composed of MXene nanosheets and other materials not only effectively suppress the re-stacking of layers, but also show the superior synergistic effects in photocatalysis. Herein, the recent progress of the MXene-based heterostructures as photocatalysts in energy and environment fields is summarized in this review. Particularly, new synthetic strategies, morphologies, structures, and mechanisms of MXene-based heterostructures are highlighted in hydrogen production, CO2 reduction, and pollutant degradation. In addition, the structure-activity relationship between the synthesis strategy, components, morphology and structure of MXene-based heterostructures, and their photocatalytic properties are elaborated in detail. Finally, a summary and the perspectives on improving the application study of the heterostructures in photocatalysis are presented.

Integration of high visible-light-driven ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction nanocomposite for enhanced uranium(VI) photoreduction separation

With deepening application of nuclear power technology, the problem of water ecological environment pollution caused by uranium (U(VI)) is becoming increasingly serious. Photoreduction separation of U(VI) on photocatalysts is considered as an effective strategy to solve uranium pollution. In this work, a novel ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction (Z-AIGH) nanocomposite with high surface area (73.45 m2 g-1, Z-AIGH2) was designed. The batch adsorption experiment in dark environment showed that Z-AIGH2 nanocomposite had an excellent U(VI) adsorption performance. As for photocatalytic experiments, Z-AIGH2 exhibited a rapid photocatalytic response for separating U(VI) without any organic sacrifice agents. The U(VI) separation rate on Z-AIGH2 nanocomposite was over 98.7% after only 20.0 min visible light irradiation (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). Z-AIGH2 nanocomposite also showed good selectivity and cycle stability. The U(VI) removal rate of Z-AIGH2 nanocomposite after fifth cycles was about 96.1% (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). High photocatalytic activity of Z-AIGH2 for U(VI) was attributed to the construction of ternary dual Z-scheme heterojunction structure and ant nest-like hole structure. Based on above results, Z-AIGH2 nanocomposite had great potential for water environment renovation.

In situ fabrication of Z-scheme C3N4/Ti3C2/CdS for efficient photocatalytic hydrogen peroxide production

Photocatalysis is a potential technology to produce hydrogen peroxide with low energy consumption and no pollution. However, when using traditional photocatalysts it is hard to meet the requirements of wide visible light absorption, high carrier separation rate and sufficient active sites. Graphitic carbon nitride (g-C3N4) has great potential in the photocatalytic production of hydrogen peroxide, but its photocatalytic performance is limited by a high carrier recombination ratio. Here, we fabricated the Z-Scheme heterojunction of C3N4/Ti3C2/CdS in situ. The large specific surface area of C3N4 can provide plenty of reactive sites, and the absorption efficiency under visible light is improved with the addition of Ti3C2 and CdS. The better conductivity of Ti3C2 reduces the charge transfer resistance. With the increase of surface charge carriers, the width of the space charge region decreases and the photocurrent density increases significantly. Under visible light irradiation, the H2O2 yield of the ternary photocatalyst reaches 256 μM L-1 h-1, which is about 6 times that of pristine C3N4. After three cycles, the high photocatalytic efficiency can still be maintained. In this paper, the reaction mechanism of photocatalytic hydrogen peroxide production by the C3N4/Ti3C2/CdS composite material is proposed through an in-depth study of energy band theory, which provides a new reference for the design and preparation of high-performance materials for photocatalytic hydrogen peroxide production.

Ambient Processed rGO/Ti3CNTx MXene Thin Film with High Oxidation Stability, Photosensitivity, and Self-Cleaning Potential

Solution-based processing offers advantages for producing thin films due to scalability, low cost, simplicity, and benignity to the environment. Here, we develop conductive and photoactivated self-cleaning reduced graphene oxide (rGO)/Ti3CNTx MXene thin films via spin coating under ambient conditions. The addition of a thin rGO layer on top of Ti3CNTx resulted in up to 45-fold improvement in the environmental stability of the film compared to the bare Ti3CNTx film. The optimized rGO/Ti3CNTx thin film exhibits an optical transmittance of 74% in the visible region of the spectrum and a sheet resistance of 19 kΩ/sq. The rGO/Ti3CNTx films show high rhodamine B discoloration activity upon light irradiation. Under UV irradiation, the electrically conductive MXene in combination with in situ formed semiconducting titanium oxide induces photogenerated charge carriers, which could potentially be used in photocatalysis. On the other hand, due to film transparency, white light irradiation can bleach the adsorbed dye via photolysis. This study opens the door for using MXene thin films as multifunctional coatings with conductive and potentially self-cleaning properties.

Exposing high-activity (111) facet CoO octahedral loading MXene quantum dots for efficient and stable photocatalytic H2 evolution

Photocatalytic splitting of water for hydrogen generation is a green and renewable solution for converting solar energy to chemical energy; thus, the development of high-performance and stable photocatalytic materials has emerged as a research hotspot recently. Herein, a heterostructure composite photocatalyst of octahedral CoO uniformly modified with novel nitrogen-doped MXene quantum dots (N-MQDs) is successfully designed using a typical solvothermal approach. The optimum photocatalytic hydrogen evolution efficiency of the prepared N-MQDs@CoO heterojunction composite is 82.54 μmol g-1 h-1 with visible light, which is 16.57 times higher compared to the pure CoO. A series of photoelectrochemical tests were further performed to elucidate the photocatalytic hydrogen evolution mechanism. The remarkable improvement of activity is primarily attributed to the synergistic interaction between the closely spaced interface contacts and energy level matching among high conductivity Ti3C2 MXene quantum dots with CoO octahedra, dramatically hastening the segregation and transfer of photo-generated carriers. This study provides new ideas for the construction of MXene quantum dot-based co-photocatalysts with highly efficient photocatalytic performance and stability toward solar energy conversion applications.

Penta-MP5 (M = B, Al, Ga, In) monolayers as high-performance photocatalysts for overall water splitting

Two-dimensional (2D) phosphorus-rich phosphides generally preserve the excellent electronic properties of phosphorene, making them promising photocatalysts for water splitting. Despite tremendous efforts in the search for potential photocatalysts in 2D phosphides, few known 2D phosphides fully meet the requirements for photocatalytic water splitting. Herein, we systemically investigate a set of penta-MP5 (M = B, Al, Ga, and In) monolayers by first-principles calculations and identify them as potential photocatalysts for water splitting. These penta-MP5 monolayers are found to feature favorable bandgaps of about 2.70 eV with appropriate band edge positions, a high carrier mobility of 1 × 104 cm-2 V-1 s-1, an excellent optical absorption coefficient (OAC) of 1 × 105 cm-1, and a good solar-to-hydrogen (STH) efficiency of 8%. Meanwhile, free energy calculations indicate that these penta-MP5 monolayers present both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) photocatalytic activities under light conditions. All these excellent properties demonstrate that penta-MP5 monolayers are suitable candidates as photocatalysts for promising applications in overall water splitting.

Bisphenol A Imprinted Electrochemical Sensor Based on Graphene Quantum Dots with Boron Functionalized g-C3N4 in Food Samples

A molecular imprinted electrochemical sensor based on boron-functionalized graphitic carbon nitride (B-g-C₃N₄) and graphene quantum dots (GQDs) was presented for selective determination of bisphenol A (BPA). In particular, by combining the selectivity and high stability properties, which are the most important advantages of molecular imprinted polymers, and the highly sensitive properties of GQDs/B-g-C₃N₄ nanocomposite, a highly selective and sensitive analytical method was developed for BPA analysis. Firstly, GQDs/B-g-C₃N₄ nanocomposite was characterized by using microscopic, spectroscopic, and electrochemical techniques. This novel molecular imprinted electrochemical sensor for BPA detection demonstrated a linearity of 1.0 × 10^-11-1.0 × 10^-9 M and a low detection limit (LOD, 3.0 × 10^-12 M). BPA-imprinted polymer on GQDs/B-g-C₃N₄ nanocomposite also showed good stability, repeatability and selectivity in food samples.

Efficient activation of persulfate by Ti3C2 MXene QDs modified ZnFe2O4 for the rapid degradation of tetracycline

Mxene-based catalysts with specific interfacial characteristics are beneficial for photocatalytic applications. Herein, Ti₃C₂ MXene modified ZnFe₂O₄ nanocomposite materials were prepared for photocatalysis. The morphology and structure of the nanocmposites were characterized by scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), which revealed that Ti₃C₂ MXene as quantum dots (QDs) was uniformly distributed on the ZnFe₂O₄ surface. The Ti₃C₂ QDs modified ZnFe₂O₄ catalyst (ZnFe₂O₄/MXene-15%) under visible light achieved 87% degradation efficiency of tetracycline within 60 min when coupled with persulfate (PS) system. The initial solution pH, PS dosage and co-existing ions were found to be the main factors affecting the heterogeneous oxidation process, while quenching experiments showed that O₂^•- is the main oxidizing species in the removal of tetracycline in ZnFe₂O₄/MXene-PS system. In addition, the cyclic experiments suggested that ZnFe₂O₄/MXene had good stability and thus it may have practical applications in industry.

Applications of BiOX in the Photocatalytic Reactions

BiOX (X = Cl, Br, I) families are a kind of new type of photocatalysts, which have attracted the attention of more and more researchers. The suitable band gaps and their convenient tunability via the change of X elements enable BiOX to adapt to many photocatalytic reactions. In addition, because of their characteristics of the unique layered structure and indirect bandgap semiconductor, BiOX exhibits excellent separation efficiency of photogenerated electrons and holes. Therefore, BiOX could usually demonstrate fine activity in many photocatalytic reactions. In this review, we will present the various applications and modification strategies of BiOX in photocatalytic reactions. Finally, based on a good understanding of the above issues, we will propose the future directions and feasibilities of the reasonable design of modification strategies of BiOX to obtain better photocatalytic activity toward various photocatalytic applications.

A Medium-entropy oxide as a promising cocatalyst to promote photocatalytic hydrogen evolution

As emerging materials, medium-entropy oxides have attracted wide attention for the huge potential in energy storage, catalytic, magnetic and thermal applications. The electronic effect or the strong synergic effect caused by the construction of medium-entropy system leads to the unique properties of catalysis. In this contribution, we reported a medium-entropy CoNiCu oxide as an efficient cocatalyst for enhanced photocatalytic hydrogen evolution reaction. The target product was synthesized by a process of laser ablation in liquids and graphene oxide was applied as a conductive substrate of it, then it was loaded on the photocatalyst g-C₃N₄. The results showed that the modified photocatalysts exhibited the reduced [Formula: see text] and enhanced abilities of photoinduced charges separation and transfer. Furthermore, a maximum hydrogen production rate was measured to be 1177.52 μmol ·g^-1·h^-1 under the visible light irradiation, which was about 291 times higher than that of pure g-C₃N₄. These findings suggest that the medium-entropy CoNiCu oxide serves as an eminent cocatalyst, which offers a possible pathway towards the broadening of the applications of medium-entropy oxides and provides the alternatives to conventional cocatalysts.

Twisty C-TiO2 /PCN S-Scheme Heterojunction with Enhanced n→π * Electronic Excitation for Promoted Piezo-Photocatalytic Effect

Herein, a twisty C-TiO₂ /PCN (CNT) Step-scheme (S-scheme) heterojunction is fabricated and applied to degrade ciprofloxacin (CIP) with the assistance of ultrasonic vibration and visible light irradiation. The nitrogen-rich twisty polymeric carbon nitride (PCN) can not only induce a non-centrosymmetric structure with enhanced polarity for a better piezoelectric effect but also provide abundant lone pair electrons to promote n→π* transition during photocatalysis. Its hybridization with C-TiO₂ particles can construct S-scheme heterojunction in CNT. During the piezo-photocatalysis, the strain-induced polarization electric field in the heterojunction can regulate the electron migration between the two components, resulting in a more effective CIP degradation. With the synergistic effect of ultrasonic vibration and visible light irradiation, the reaction rate constant of CIP degradation by CNT increases to 0.0517 min^-1 , which is 1.86 times that of photocatalysis and 6.46 times that of ultrasound. This system exhibits a stable CIP decomposition efficiency under the interference of various environmental factors. In addition, the in-depth investigation found that three pathways and 12 major intermediates with reduced toxicity are produced after the reaction. Hopefully, the construction of this twisty CNT S-scheme heterojunction with enhanced piezo-photocatalytic effect offers inspiration for the design of environmentally functional materials.

Insights into engineered graphitic carbon nitride quantum dots for hazardous contaminants degradation in wastewater

Increased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C₃N₄) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C₃N₄ QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C₃N₄ QD-based materials. Furthermore, this review discusses the practical applications of g-C₃N₄ QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C₃N₄ QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C₃N₄ QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

A novel fluorescent nanoprobe based on potassium permanganate-functionalized Ti3C2 QDs for the unique "turn-on" dual detection of Cr3+ and Hg2+ ions

Titanium carbide quantum dots (Ti₃C₂ QDs) were synthesized by ammonia-assisted hydrothermal method. We also synthesized potassium permanganate (KMnO₄)-functionalized Ti₃C₂ QDs (Mn-QDs) by modifying Ti₃C₂ nanosheets with KMnO₄ and then cutting the functional nanosheets into Mn-QDs. The Ti₃C₂ QDs and Mn-QDs were characterized by fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR), UV-vis spectrophotometry (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Furthermore, the modified Mn-QDs have strong luminescence ability and good dispersion stability, which can be used for Cr³⁺ and Hg²⁺ double ion detection with enhanced fluorescence specificity. Cr³⁺/Hg²⁺ and negatively charged Mn-QDs are bound together by electrostatic interactions. Meanwhile, the surface of Mn-QDs is rich in functional groups, which interacts with Cr³⁺/Hg²⁺ to modify the surface traps, leading to defect passivation and exhibiting photoluminescence enhancement. For the dynamic quenching produced by the interaction of Mn-QDs with Hg²⁺ within 50 μM, it may be caused by the complex formation of Hg²⁺ trapped by the amino group on the surface of Mn-QDs. The detection limits for Cr³⁺ and Hg²⁺ were 0.80 μM and 0.16 μM, respectively. The recoveries of Cr³⁺ and Hg²⁺ ions in real water samples were 93.79-105.10% and 93.91-102.05%, respectively, by standard addition recovery test. In this work, the application of Mn-QDs in Cr³⁺ and Hg²⁺ ion detection was researched, which opens a new way for its application in the field of detecting heavy metal ions.

Wavelength engineerable porous organic polymer photosensitizers with protonation triggered ROS generation

Engineering excitation wavelength of photosensitizers (PSs) for enhanced reactive oxygen species (ROS) generation has inspired new windows for opportunities, enabling investigation of previously impracticable biomedical and photocatalytic applications. However, controlling the wavelength corresponding to operating conditions remains challenging while maintaining high ROS generation. To address this challenge, we implement a wavelength-engineerable imidazolium-based porous organic photocatalytic ROS generation system (KUP system) via a cost-effective one-pot reaction. Remarkably, the optimal wavelength for maximum performance can be tuned by modifying the linker, generating ROS despite the absence of metal ions and covalently attached heavy atoms. We demonstrate that protonated polymerization exclusively enables photosensitization and closely interacts with oxygen related to the efficiency of photosensitizing. Furthermore, superior tumor eradication and biocompatibility of the KUP system were confirmed through bioassays. Overall, the results document an unprecedented polymerization method capable of engineering wavelength, providing a potential basis for designing nanoscale photosensitizers in various ROS-utilizing applications.

Codoping g-C3N4 with boron and graphene quantum dots: Enhancement of charge transfer for ultrasensitive and selective photoelectrochemical detection of dopamine

The development of superior photoelectrochemical (PEC) sensors for biosensing has become a major objective of PEC research. However, conventional PEC-active materials are typically constrained by a weak photocurrent response owing to their limited surface-active sites and high electron-hole recombination rate. Here, a boron and graphene quantum dots codoped g-C₃N₄ (named GBCN) as PEC sensor for highly sensitive dopamine (DA) detection was fabricated. GBCN exhibited the greatest photocurrent response and PEC activity compared to free g-C₃N₄ and g-C₃N₄ doped with boron. The proposed PEC sensor for DA determination exhibited a broad linear range (0.001-800 μM) and a low detection limit (0.96 nM). In particular, a sensitivity up to 10.3771 μA/μM/cm² was seen in the case of GBCN. The high PEC activity can be attributed to the following factors: (1) the boron and graphene quantum dots co-doping significantly increased the specific surface area of g-C₃N₄, providing more adsorption sites for DA; (2) the dopants extended the absorption intensity of g-C₃N₄, red-shifting the absorption from 470 to 540 nm; and (3) the synergism of boron and graphene quantum dots efficiently boosted the photogenerated electrons migration from the conduction band of g-C₃N₄ to graphene quantum dots, facilitating charge separation. In addition, GBCN also exhibited good anti-interference ability and stability. This research may shed light on the creation of a highly sensitive and selective PEC platform for detecting biomolecules.

Organic Photovoltaic Catalyst with σ-π Anchor for High-Performance Solar Hydrogen Evolution

Efficient in situ deposition of metallic cocatalyst, like zero-valent platinum (Pt), on organic photovoltaic catalysts (OPCs) is the prerequisite for their high catalytic activities. Here we develop the OPC (Y6CO), by introducing carbonyl in the core, which is available to σ-π coordinate with transition metals, due to the high-energy empty π* orbital of carbonyl. Y6CO exhibits a stronger capability to anchor Pt species and reduce them to metallic state, resulting in more Pt⁰ deposition, relative to the control OPC without the central σ-π anchor. Single-component and heterojunction nanoparticles (NPs) employing Y6CO show enhanced average hydrogen evolution rates of 230.98 and 323.22 mmol h^-1  g_[OPC] ^-1 , respectively, under AM 1.5G, 100 mW cm^-2 for 10 h, and heterojunction NPs yield the external quantum efficiencies of ca. 10 % in 500-800 nm. This work demonstrates that σ-π anchoring is one efficient strategy for integrating metallic cocatalyst and OPC for high-performance photocatalysis.

The enhanced photocatalytic and photothermal effects of Ti3C2 Mxene quantum dot/macroscopic porous graphitic carbon nitride heterojunction for Hydrogen Production

A new heterostructure between Ti₃C₂ MXene quantum dot and 3D macroscopic porous graphitic carbon nitride (PGCN) was successfully obtained by integrating Ti₃C₂ quantum dots onto porous graphitized carbon nitride (Ti₃C₂QDs/PGCN) using in situ electrostatic self-assembly techniques. The photocatalytic H₂ evolution rate of optimized 5.5 wt% Ti₃C₂ QD/PGCN composites is nearly 15.24 and 3.53 times higher than pristine CN, and PGCN, respectively. Ti₃C₂ quantum dots can significantly enhance the hydrogen production activity of PGCN. In addition, their good photothermal conversion ability accelerates the overall reaction process and enhances the light absorption and carrier density. Furthermore, to elucidate the photocatalytic mechanism, a series of tests involving electron spin resonance (ESR) and density functional theory (DFT) calculations were performed. The results confirmed that the Schottky barrier between PGCN and Ti₃C₂ QD can effectively promote spatial charge separation and significantly improve the photocatalytic performance. This work provides a new approach for the construction of photocatalytic systems and the application of MXene QD.

Niche Applications of MXene Materials in Photothermal Catalysis

MXene materials have found emerging applications as catalysts for chemical reactions due to their intriguing physical and chemical applications. In particular, their broad light response and strong photothermal conversion capabilities are likely to render MXenes promising candidates for photothermal catalysis, which is drawing increasing attention in both academic research and industrial applications. MXenes are likely to satisfy all three criteria of a desirable photothermal catalyst: strong light absorption, effective heat management, and versatile surface reactivity. However, their specific functionalities are largely dependent on their structure and composition, which makes understandings of the structure–function relationship of crucial significance. In this review, we mainly focus on the recent progress of MXene–based photothermal catalysts, emphasizing the functionalities and potential applications of MXene materials in fields of photothermal catalysis, and provide insights on design principles of highly efficient MXene–based photothermal catalysts from the atomic scale. This review provides a relatively thorough understanding of MXene–based materials for photothermal catalysis, as well as an in–depth investigation of emerging high-prospect applications in photothermal catalysis.

Enhanced activity of ZnS (111) by N/Cu co-doping: Accelerated degradation of organic pollutants under visible light

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment. In this study, N/Cu co-doped ZnS nanosphere photocatalyst (N/Cu-ZnS) is synthesized by a hydrothermal method for the first time. After doping, the texture of nanosphere becomes loose, the nanometer diameter is reduced, making the specific surface area of catalyst increased from 34.73 to 101.59 m²/g. The characterization results show that more ZnS (111) crystal planes are exposed by N/Cu co-doping; the calculations of density functional theory show that N/Cu co-doping can increase the catalytic activity of the ZnS (111) crystal plane, enhance the adsorption capacity of (111) crystal plane to O₂, and promote the generation of •O₂^-. The energy levels of the introduced impurities can be hybridized with the energy levels of S and Zn at the top of valence band and the bottom of conduction band, which makes the band gap narrower, thus enhancing the absorption of visible light. Compared with pure ZnS, the degradation rates of 2,4-dichlorophenol (2,4-DCP) and tetracycline (TC) by N/Cu-ZnS under visible light (>420 nm) are increased by 83.7 and 51 times, respectively. In this research, a promising photocatalyst for photocatalytic degradation of organic pollutants in wastewater is provided.

Recent Advances in the Synthesis of MXene Quantum Dots

Quantum dots (QDs) with ultrahigh surface-to-volume ratio, abundant edge active sites, forceful quantum confinement and other remarkable physio-chemical properties, have garnered considerable research interest. MXene QDs, as an emerging member of them, have also attracted wide attention in the last six years, and shown great achievements in many fields. This critical review systematically summarizes the various methods for synthesizing MXene QDs. The characteristics and corresponding applications of various MXene QDs are also presented. The advantages and disadvantages of various synthetic methods, and the limitations of corresponding MXene QDs are compared and highlighted. Finally, the challenges and perspectives of synthesizing MXene QDs are proposed. We hope this review will enlighten researchers to the fabrication of more advancing and promising MXene-based QDs with proprietary properties in diverse applications.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Architecture and Kinetic Studies of Photocatalytic H2O2 Generation and H2 Evolution through Regulation of Spatial Charge Transfer via Z-Scheme Path over a (001) Facet Engineered TiO2@MXene/B-g-C3N4 Ternary Hybrid

Spatial charge separation and migration are the critical shortcomings dominating the core energy conversion corridors of photocatalytic systems. Here, a biomimetic multi-interfacial architecture providing strong coupled interaction and rapid charge transmission for photostable and competent photocatalytic H2O2 production and H2 evolution is proposed. The triple-hybrid all-solid-state Z-scheme system was formed with the (001) facet exposed TiO2 nanosheets derived from MXene layers and B-g-C3N4 nanosheets (M/(001)TiO2@BCN) through an electrostatic self-assembly strategy with intimate electronic interaction due to Ti orbital modulation and proper stacking among the hybrids. The metallic and highly conductive MXene layers act as solid state electron mediators in the Z-scheme heterojunction that promote electron-hole separation and migration efficiency. Specifically, the MTBCN-12.5 composite provides optimum yield of H2O2 up to 1480.1 μmol h-1 g-1 and a H2 evolution rate of 408.4 μmol h-1 (with ACE 6.7%), which are 4 and 20 fold greater than the pristine BCN, respectively. The enhanced photocatalytic performance is systematically identified by the increased surface area, higher cathodic and anodic current densities of -1.01 and 2.27 mA cm-2, delayed charge recombination as supported by PL and EIS measurement, and excellent photostability. The Z-scheme charge transfer mechanism is validated by time-resolved photoluminescence (TRPL) analysis, cyclic voltametric analysis, and the radical trapping experiment as detected by PL analysis. This research marks a substantial advancement and establishes the foundation for future design ideas in accelerating charge transfer.

Semiconductor photocatalysts: A critical review highlighting the various strategies to boost the photocatalytic performances for diverse applications

The photocatalytic technology illustrates an eco-friendly and sustainable route to overcome environmental and energy issues. The successful construction of a photocatalyst depends on four key elements: light absorption ability, the density of active sites, redox capacity, and photoinduced electron-hole recombination rate. Sincemost of intrinsic semiconductor photocatalysts cannot meet all these requirements, they are often modified to boost their photocatalytic properties. Many strategies have been adopted to design novel and efficient photocatalysts for diverse applications. Herein, we review the most efficient of these strategies and methods focused on effectively overcoming the efficiency limitations of photocatalysts to promote their large-scale application. Subsequently, a particular aim is put on the most current studies for photocatalytic applications, including CO₂ reduction, N₂ fixation, H₂ evolution, and pollutants degradation. Finally, key challenges and future perspectives in designing and implementing semiconductor photocatalysts for large-scale applications are discussed. Therefore, it is foreseen that this review will work as a guide for future research and provides a variety of strategies to develop novel and high-performance photocatalysts for various applications.

Advances in Titanium Carbide (Ti3C2T x ) MXenes and Their Metal-Organic Framework (MOF)-Based Nanotextures for Solar Energy Applications: A Review

Introducing new materials with low cost and superior solar harvesting efficiency requires urgent attention to solve energy and environmental challenges. Titanium carbide (Ti₃C₂T _x ) MXene, a 2D layered material, is a promising solution to solve the issues of existing materials due to their promising conductivity with low cost to function as a cocatalyst/support. On the other hand, metal-organic frameworks (MOFs) are emerging materials due to their high surface area and semiconducting characteristics. Therefore, coupling them would be promising to form composites with higher solar harvesting efficiency. Thus, the main objective of this work to disclose recent development in Ti₃C₂T _x -based MOF nanocomposites for energy conversion applications to produce renewable fuels. MOFs can generate photoinduced electron/hole pairs, followed by transfer of electrons to MXenes through Schottky junctions for photoredox reactions. Currently, the principles, fundamentals, and mechanism of photocatalytic systems with construction of Schottky junctions are critically discussed. Then the basics of MOFs are discussed thoroughly in terms of their physical properties, morphologies, optical properties, and derivatives. The synthesis of Ti₃C₂T _x MXenes and their composites with the formation of surface functionals is systematically illustrated. Next, critical discussions are conducted on design considerations and strategies to engineer the morphology of Ti₃C₂T _x MXenes and MOFs. The interfacial/heterojunction modification strategies of Ti₃C₂T _x MXenes and MOFs are then deeply discussed to understand the roles of both materials. Following that, the applications of MXene-mediated MOF nanotextures in view of CO₂ reduction and water splitting for solar fuel production are critically analyzed. Finally, the challenges and a perspective toward the future research of MXene-based MOF composites are disclosed.

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Photocatalytic water splitting, CO₂ reduction, and pollutant degradation have emerged as promising strategies to remedy the existing environmental and energy crises. However, grafting of expensive and less abundant noble-metal cocatalysts on photocatalyst materials is a mandatory practice to achieve enhanced photocatalytic performance owing to the ability of the cocatalysts to extract electrons efficiently from the photocatalyst and enable rapid/enhanced catalytic reaction. Hence, developing highly efficient, inexpensive, and noble-metal-free cocatalysts composed of earth-abundant elements is considered as a noteworthy step toward considering photocatalysis as a more economical strategy. Recently, MXenes (two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides) have shown huge potential as alternatives for noble-metal cocatalysts. MXenes have several excellent properties, including atomically thin 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. In addition, they exhibit Gibbs free energy of intermediate H atom adsorption as close to zero and less than that of a commercial Pt-based cocatalyst, a Fermi level position above the H₂ generation potential, and an excellent ability to capture and activate CO₂ molecules. Therefore, there is a growing interest in MXene-based photocatalyst materials for various photocatalytic events. In this review, we focus on the recent advances in the synthesis of MXenes with 2D and 0D morphologies, the stability of MXenes, and MXene-based photocatalysts for H₂ evolution, CO₂ reduction, and pollutant degradation. The existing challenges and the possible future directions to enhance the photocatalytic performance of MXene-based photocatalysts are also discussed.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

High-Efficiency Oxygen Reduction to Hydrogen Peroxide Catalyzed by Oxidized Mo2TiC2 MXene

The two-electron oxygen reduction reaction (2e−ORR) pathway electrochemical synthesis to H2O2 has the advantages of low investment and environmental protection and is considered to be a promising green method. Herein, the oxidized Mo2TiC2 MXene (O-Mo2TiC2) was successfully synthesized by a facile hydrothermal method as an electrocatalyst in electrocatalytic H2O2 production. The O-Mo2TiC2 achieved the 90% of H2O2 selectivity and 0.72 V vs. RHE of the onset potential. Moreover, O-Mo2TiC2 showed high charge transfer ability and long-term stable working ability of 40 h. This significantly enhanced electrocatalytic H2O2 production capacity is assigned the oxidation treatment of Mo2TiC2 MXene to generate more oxygen-containing groups in O-Mo2TiC2. This work provides a promising catalyst candidate for the electrochemical synthesis of H2O2.

Formamidinium Halide Perovskite and Carbon Nitride Thin Films Enhance Photoreactivity under Visible Light Excitation

Photochemical and photocatalytic activity of adsorbates on surfaces is strongly dependent on the nature of a given substrate and its resonant absorption of the (visible) light excitation. An observation is reported here of the visible light photochemical response of formamidinium lead bromide (FAPbBr₃) halide perovskite and carbon nitride (CN) thin-film materials (deposited on a SiO₂/Si(100) substrate), both of which are known for their photovoltaic and photocatalytic properties. The goal of this study was to investigate the role of the substrate in the photochemical reactivity of an identical probe molecule, ethyl chloride (EC), when excited by pulsed 532 nm laser under ultrahigh vacuum (UHV) conditions. Postirradiation temperature-programmed desorption (TPD) measurements have indicated that the C–Cl bond dissociates following the visible light excitation to form surface-bound fragments that react upon surface heating to form primarily ethane and butane. Temperature-dependent photoluminescence (PL) spectra of the FAPbBr₃ films were recorded and decay lifetimes were measured, revealing a correlation between length of PL decay and the photoreactivity yield. We conclude that the FAPbBr₃ material with its absorption spectrum in resonance with visible light excitation (532 nm) and longer PL lifetime leads to three times faster (larger cross-section) photoproduct formation compared with that on the CN substrate. These results contrast the behavior under ambient conditions where the CN materials are photochemically superior due, primarily, to their stability within humid environments.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

Ti3C2 MXene-anchored photoelectrochemical detection of exosomes by in situ fabrication of CdS nanoparticles with enzyme-assisted hybridization chain reaction

Exosomes that carry large amounts of tumor-specific molecular information have been identified as a potential non-invasive biomarker for early warning of cancer. In this work, we reported an enzyme-assisted photoelectrochemical (PEC) biosensor for quantification of exosomes based on the in situ synthesis of Ti₃C₂ MXene/CdS composites with magnetic separation technology and hybridization chain reaction (HCR). First, exosomes were specifically bound between aptamer-labeled magnetic beads (CD63-MBs) and a cholesterol-labeled DNA anchor. The properly designed anchor ends acted as a trigger to enrich the alkaline phosphatase (ALP) through HCR. It catalyzed more sodium thiophosphate to generate the sulfideion (S²⁻), which combined with Cd²⁺ for in situ fabrication of CdS on Ti₃C₂ MXene resulting in elevated photocurrent. The Ti₃C₂ MXene-anchored PEC method was realized for the quantitative detection of exosomes, which exhibited the dynamic working range from 7.3 × 10⁵ particles per mL to 3.285 × 10⁸ particles per mL with a limit of detection of 7.875 × 10⁴ particles per mL. The strategy showed acceptable stability, high sensitivity, rapid response and excellent selectivity. Furthermore, we believe that the PEC biosensor has huge potential as a routine bioassay method for the precise quantification of exosomes from breast cancer in the future.

An enzyme-assisted photoelectrochemical (PEC) biosensor was established for quantification of exosomes based on the in situ synthesis of Ti₃C₂ MXene/CdS composites with magnetic separation technology and hybridization chain reaction (HCR).