Wrapping AgCl Nanostructures with Trimetallic Nanomeshes for Plasmon-Enhanced Catalysis and in Situ SERS Monitoring of Chemical Reactions

Solvent-Driven Enrichment and Multiplex Analysis of Local Anesthetics by Thin-Layer Chromatography Coupled with Surface-Enhanced Raman Spectroscopy

Local anesthetics have been widely used in clinical analgesia due to their ability to provide effective regional pain management. Accurate measurement of local anesthetics in body fluids is crucial for ensuring patient medication safety and optimizing therapeutic efficacy. Herein, we present a convenient, economical, sensitive, and efficient TLC-SERS method for multiplex determination of six kinds of anesthetics (pro) in human plasma, including procaine hydrochloride (Pro), tetracaine hydrochloride (Tet), dibucaine (Dib), mepivacaine hydrochloride (Mep), lidocaine hydrochloride (Lid), and ropivacaine hydrochloride (Rop). The TLC method was adopted to separate six local anesthetics effectively. In order to improve the sensitivity, TLC spots were concentrated into smaller ones using methanol through solvent-driven enrichment, then Ag NPs staining was applied to enriched spots for a strong and unique SERS response of each anesthetic. As a result, linear calibration curves of SERS intensity ratio versus negative logarithm of spotting amounts sampled on TLC plates were obtained, along with the lowest detectable amounts in this study were 1 ng (Pro), 10 pg (Tet), 10 ng (Dib), 50 ng (Mep), 50 ng (Lid), and 0.1 μg (Rop), which were up to 2 × 104 times more sensitive than our previous TLC-Raman method. Moreover, the method was successfully applied to human plasma samples, demonstrating the feasibility and potential for multiplex analysis of local anesthetics in clinical practice, criminal forensics, and aquaculture.

One-step fabrication of flexible polyamide@Ag-dodecanethiol membranes for highly sensitive SERS detection of thiram

The surface-enhanced Raman scattering (SERS) is an effective spectral technology based on Raman scattering, but in practice, the commonly used SERS substrates suffer from low sensitivity and poor stability. In order to overcome these limitations, the SERS substrates were prepared from hydrophobic modification of dodecanethiol (C12) coupled with a flexible substrate, which was then used for pesticides detection in water. A flexible PA@Ag-C12 substrate with surface functionalization has been obtained. This work aims to investigate the self-assembly of Ag NPs modified with C12 onto polyamide (PA) membranes. Initially, transmission electron microscopy and scanning electron microscopy were used to analyze the substrate's morphology. Then with the help of an energy-dispersive spectrometer, sulfur content of C12-modified Ag NPs was analyzed. In order to determine the hydrophobicity of the modified Ag NPs, the contact angle was used. The results indicate that the gap between Ag NPs on PA membrane can be effectively controlled in order to prevent Ag NPs from aggregating. Furthermore, the finite-difference time-domain analysis indicated that the PA@Ag-C12 substrate exhibited a stronger electromagnetic enhancement effect than the PA@Ag substrate. By reducing NPs gaps on the PA membrane, the number of 'hot spots' increased, and the SERS performance of the substrate was improved as a result. According to the results of this study, this method can greatly reduce the manufacturing costs and time costs of the SERS substrate while maintaining the original uniformity. The SERS performance of PA@Ag-C12 was found to be three orders of magnitude better than that of PA@Ag direct self-assembled substrate, and the detection limit for Rhodamine 6G (R6G) was approximately 8.47 × 10-14M. On the basis of the PA@Ag-C12 substrate, thiram is detectable at a detection limit of 5.88 × 10-11M with a high degree of sensitivity and repeatability.

Ag-Au-Cu Trimetallic Alloy Microflower: A Highly Sensitive SERS Substrate for Detection of Low Raman Scattering Cross-Section Thiols

Trimetallic Ag-Au-Cu alloy microflowers (MFs) with various surface compositions were synthesized on a glass coverslip and used as efficient surface-enhanced Raman spectroscopy (SERS) substrates for highly sensitive label-free detection of smaller Raman scattering cross-section molecules, namely, L-cysteine and toxic thiophenols. MFs of different compositions were synthesized via appropriate mixing of metal-alkyl ammonium halide precursors followed by a single-step thermolysis at 350 °C. While the Ag percentage was kept constant at 90% for all the substrates, the composition of Au and Cu was varied between 1 and 9% sequentially. The synthesized MFs were thoroughly characterized by using field emission scanning electron microscopy (FE-SEM), wide-angle X-ray scattering, X-ray photoelectron spectroscopy (XPS), and X-ray fluorescence techniques. FE-SEM studies revealed that the MFs were present throughout the substrate, and the average size varied from 20 to 40 μm. XPS studies showed that the top surface of the alloy substrates was rich in either Au or Cu atoms, while Ag remained underneath. The performance of the trimetallic MFs as SERS substrates was evaluated using Rhodamine 6G as a probe molecule, which showed that the MFs with Ag-Au-Cu compositions 90-7-3 and 90-3-7 were found to be the best and of equal SERS efficiency. The SERS enhancement factor (EF) of both these MFs was found to be the same, approximately 9 × 107, when calculated using 1,2,3-benzatriazole as the probe molecule. Between the two, the trimetallic substrate with a higher Au percentage (Ag-Au-Cu as 90-7-3) was used for the sensitive SERS-based detection of thiols to exploit the strong Au-S binding interaction. By virtue of the high EF of the substrate, the inherently low Raman scattering cross-sections of the probe molecules were greatly enhanced in SERS mode. The 'limit of quantification (LOQ)' values were found to be 1 nM for aliphatic L-Cysteine and 1-0.1 pM for aromatic thiols using the trimetallic SERS sensor.

Novel metal peroxide nanoboxes restrain Clostridioides difficile infection beyond the bactericidal and sporicidal activity

Clostridioides difficile spores are considered as the major source responsible for the development of C. difficile infection (CDI), which is associated with an increased risk of death in patients and has become an important issue in infection control of nosocomial infections. Current treatment against CDI still relies on antibiotics, which also damage normal flora and increase the risk of CDI recurrence. Therefore, alternative therapies that are more effective against C. difficile bacteria and spores are urgently needed. Here, we designed an oxidation process using H2O2 containing PBS solution to generate Cl- and peroxide molecules that further process Ag and Au ions to form nanoboxes with Ag-Au peroxide coat covering Au shell and AgCl core (AgAu-based nanoboxes). The AgAu-based nanoboxes efficiently disrupted the membrane structure of bacteria/spores of C. difficile after 30-45 min exposure to the highly reactive Ag/Au peroxide surface of the nano structures. The Au-enclosed AgCl provided sustained suppression of the growth of 2 × 107 pathogenic Escherichia coli for up to 19 days. In a fecal bench ex vivo test and in vivo CDI murine model, biocompatibility and therapeutic efficacy of the AuAg nanoboxes to attenuate CDI was demonstrated by restoring the gut microbiota and colon mucosal structure. The treatment successfully rescued the CDI mice from death and prevented their recurrence mediated by vancomycin treatment. The significant outcomes indicated that the new peroxide-derived AgAu-based nanoboxes possess great potential for future translation into clinical application as a new alternative therapeutic strategy against CDI.

Unveiling the Role of Precursors in the Byproduct Formation of AgCl-Replicated Bimetallic Nanostructures and Their Stability-Dependent Photothermal Properties

AgCl nanomaterials recently attracted scientific interest as useful structural building blocks for producing metallic nanomaterials owing to their facile synthesis, controllable morphology, and ease of removal under ambient conditions. However, their complex chemical reactivity has primarily been studied in association with water solubility or reducibility. This study investigates the pivotal role of precursor ligands in the photochemical synthesis of metallic cubic mesh nanostructures on the AgCl templates. The side reactions between AgCl and Au precursors with different ligands are thoroughly discussed along with their influence on the byproduct formation and the structural stability of the resulting metallic nanostructures. Importantly, we introduce for the first time the partial destruction of AgCl and the formation of undesirable byproducts caused by the presence of highly oxidizing and Cl-containing AuCl₄^-. In addition, a synthetic route for producing highly pure and stable metallic nanostructures using a halogen-free Au precursor or Pt-priming is proposed. Further, the photothermal properties of these replicated metallic nanostructures are presented as a new evaluation tool for analyzing their overall structural stability. Discovering the role of precursor ligands in the reaction system will prove useful as a guide for the synthesis of functional noble metal nanomaterials using silver halide templates.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Interfacial interactions of SERS-active noble metal nanostructures with functional ligands for diagnostic analysis of protein cancer markers

Noble metal nanostructures with designed hot spots have been widely investigated as surface-enhanced Raman spectroscopy (SERS)-active substrates, particularly for selective and sensitive detection of protein cancer markers. For specific target recognition and efficient signal amplification, SERS probe design requires a choice of SERS-active nanostructures as well as their controlled functionalization with Raman dyes and target recognition entities such as antibodies. However, the chemical conjugation of antibodies and Raman dyes to SERS substrates has rarely been discussed to date, despite their substantial roles in detection schemes. The interfacial interactions of metal nanostructures with functional ligands during conjugation are known to be strongly influenced by the various chemical and physical properties of the ligands, such as size, molecular weight, surface charge, 3-dimensional structures, and hydrophilicity/hydrophobicity. In this review, we discuss recent developments in the design of SERS probes over the last 4 years, focusing on their conjugation chemistry for functionalization. A strong preference for covalent bonding is observed with Raman dyes having simpler molecular structures, whereas more complicated ones are non-covalently adsorbed. Antibodies are both covalently and non-covalently bonded to nanostructures, depending on their activity in the SERS probes. Considering that ligand conjugation is highly important for chemical stability, biocompatibility, and functionality of SERS probes, this review is expected to expand the understanding of their interfacial design, leading to SERS as one of the most promising spectroscopic analytical tools for the early detection of protein cancer markers.

Surface-Enhanced Raman Scattering Monitoring of Oxidation States in Defect-Engineered Two-Dimensional Transition Metal Dichalcogenides

Recent studies have found that some transition metal dichalcogenides (TMDs) with their own defects are difficult to store in the air for a long time. Worse stability of TMDs under extreme conditions has also been reported. Therefore, monitoring the oxidation and degradation processes of TMDs can directly guide the stability prediction of TMD-based devices and monitor TMDs quality. Herein, with the case of molybdenum disulfide, UV-ozone defect engineering is used to simulate the oxidation and degradation of TMDs under severe conditions. Surface-enhanced Raman scattering based on a chemical mechanism was first introduced to the dynamic monitoring of defect evolution in the oxidation and degradation of TMDs, and succeeds in tracking the TMDs oxidation state by the quantitative method. It is expected that this technology can be extended to the quantification and tracking of oxidation and degradation of other 2D materials.

Structurally and Compositionally Tunable Absorption Properties of AgCl@AgAu Nanocatalysts for Plasmonic Photocatalytic Degradation of Environmental Pollutants

Composite nanomaterials having Ag nanoparticles (NPs) that decorate nanostructured AgCl (Ag/AgCl) are promising as plasmonic photocatalysts because of the visible-light absorption of Ag NPs. However, the narrow absorption bands of Ag NPs near 400 nm cause inefficient absorption in the visible range and, consequently, unsatisfactory photocatalytic activity of Ag/AgCl nanomaterials. In this study, we introduce a new class of AgCl-based photocatalysts that are decorated with bimetallic Ag and Au NPs (AgCl@AgAu NPs) for visible-light-driven photocatalytic degradation of organic pollutants. Polyvinylpyrrolidone induces selective reduction of noble metal precursors on AgCl while leaving AgCl intact. The extended composition of the decorating NPs red-shifts the absorption band to 550–650 nm, which allows the catalysts to take advantage of more energy in the visible range for improved efficiency. Furthermore, we control the structures of the AgCl@AgAu NPs, and investigate their correlation with photocatalytic properties. The versatility, chemical stability, and practical application of the AgCl@AgAu NPs are demonstrated using various organic pollutants, recycling experiments, and natural aqueous media, respectively. Our fundamental investigation on the synthesis and applications of AgCl-based nano-photocatalysts is highly valuable for designing plasmonic photocatalysts and expanding their utilization.