Biocompatible Fluorescent Nanodiamonds as Multifunctional Optical Probes for Latent Fingerprint Detection

Unveiling Hidden Prints: Optically stimulated luminescence for latent fingerprint detection

Fluorescent lighting and optical techniques have been widely utilized to enhance the detection of latent fingerprints. However, the development of new techniques is imperative to expand the range of surfaces from which latent fingerprints can be detected. When relying on traditional methods, fingerprint evidence can remain undetected or even disregarded due to insufficient detection and limited detail, especially when dealing with a luminescent background. In this study, we propose the utilization of optically stimulated luminescence (OSL) applied to a Ba2SiO4 matrix, co-doped with Eu2+ and Dy3+, as a powerful method for visualizing latent fingerprints on various surfaces, including thin plastic bags, rigid duct tape, thin aluminum foil, and glass slices. This technique effectively eliminates any luminescent background and significantly enhances optical imaging. This represents the first successful application of OSL in the development of latent fingerprints, thus paving the way for more efficient and effective forensic techniques in the future.

Mesoporous Polydopamine-Encapsulated Fluorescent Nanodiamonds: A Versatile Platform for Biomedical Applications

Fluorescent nanodiamonds (FNDs) are versatile nanomaterials with promising properties. However, efficient functionalization of FNDs for biomedical applications remains challenging. In this study, we demonstrate mesoporous polydopamine (mPDA) encapsulation of FNDs. The mPDA shell is generated by sequential formation of micelles via self-assembly of Pluronic F127 (F127) with 1,3,5-trimethyl benzene (TMB) and composite micelles via oxidation and self-polymerization of dopamine hydrochloride (DA). The surface of the mPDA shell can be readily functionalized with thiol-terminated methoxy polyethylene glycol (mPEG-SH), hyperbranched polyglycerol (HPG), and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS). The PEGylated FND@mPDA particles are efficiently taken up by, and employed as a fluorescent imaging probe for, HeLa cells. HPG-functionalized FND@mPDA is conjugated with an amino-terminated oligonucleotide to detect microRNA via hybridization. Finally, the increased surface area of the mPDA shell permits efficient loading of doxorubicin hydrochloride. Further modification with TPGS increases drug delivery efficiency, resulting in high toxicity to cancer cells.

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1-3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

Axial profiling of interferometric scattering enables an accurate determination of nanoparticle size

Interferometric scattering (iSCAT) microscopy has undergone significant development in recent years. It is a promising technique for imaging and tracking nanoscopic label-free objects with nanometer localization precision. The current iSCAT-based photometry technique allows quantitative estimation for the size of a nanoparticle by measuring iSCAT contrast and has been successfully applied to nano-objects smaller than the Rayleigh scattering limit. Here we provide an alternative method that overcomes such size limitations. We take into account the axial variation of iSCAT contrast and utilize a vectorial point spread function model to uncover the position of a scattering dipole and, consequently, the size of the scatterer, which is not limited to the Rayleigh limit. We found that our technique accurately measures the size of spherical dielectric nanoparticles in a purely optical and non-contact way. We also tested fluorescent nanodiamonds (fND) and obtained a reasonable estimate for the size of fND particles. Together with fluorescence measurement from fND, we observed a correlation between the fluorescent signal and the size of fND. Our results showed that the axial pattern of iSCAT contrast provides sufficient information for the size of spherical particles. Our method enables us to measure the size of nanoparticles from tens of nanometers and beyond the Rayleigh limit with nanometer precision, making a versatile all-optical nanometric technique.

Nanoparticles-mediated CRISPR-Cas9 gene therapy in inherited retinal diseases: applications, challenges, and emerging opportunities

Inherited Retinal Diseases (IRDs) are considered one of the leading causes of blindness worldwide. However, the majority of them still lack a safe and effective treatment due to their complexity and genetic heterogeneity. Recently, gene therapy is gaining importance as an efficient strategy to address IRDs which were previously considered incurable. The development of the clustered regularly-interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) system has strongly empowered the field of gene therapy. However, successful gene modifications rely on the efficient delivery of CRISPR-Cas9 components into the complex three-dimensional (3D) architecture of the human retinal tissue. Intriguing findings in the field of nanoparticles (NPs) meet all the criteria required for CRISPR-Cas9 delivery and have made a great contribution toward its therapeutic applications. In addition, exploiting induced pluripotent stem cell (iPSC) technology and in vitro 3D retinal organoids paved the way for prospective clinical trials of the CRISPR-Cas9 system in treating IRDs. This review highlights important advances in NP-based gene therapy, the CRISPR-Cas9 system, and iPSC-derived retinal organoids with a focus on IRDs. Collectively, these studies establish a multidisciplinary approach by integrating nanomedicine and stem cell technologies and demonstrate the utility of retina organoids in developing effective therapies for IRDs.

Synthesis of Mesoporous SiO2 coating containing chlorine phenol formaldehyde resin (Cl-PFR) composites for effective fingerprint detection

As a kind of non-metals fluorescent reagent, the containing chlorine phenol-formaldehyde resin (Cl-PFR) nanoparticles (NPs) were synthesized with the facile method. The as-synthesized Cl-PFR nanoparticles can emit strong green fluorescence emission under the irradiation of 365nm UV light. Since mesoporous silica nanoparticles (MSNs) NPs have a large specific area, strong adsorption, and uniform dispersion, the MSN coating Cl-PFR composites were prepared by mixing Cl-PFR and MSN NPs together. Thus, the as-synthesized multifunctional composites combine the advantages of green fluorescence Cl-PFR, and strong adhesion MSN was applied to detect the potential fingerprint. Different bases fingerprints (glass, paper, aluminum sheets, rough stones, tape) can be clearly observed in the presence of the Cl-PFR@MSN-NH₂ composites. Furthermore, the aging three months and washed with water several times fingerprint can also be clearly displayed with the multifunctional composites. This study provided a simple, economical, and non-toxic fluorescent reagent for the application in fingerprint detection.

Cooccurrence of pH-sensitive shifting blue and immobile green triple surface-state fluorescence in ultrasmall super body-centered cubic carbon quantum dots

Carbon quantum dots are widely used in various fields owing to excellent optical properties and outstanding biocompatibility. We synthesize rare super body-centered cubic (C₈) structured carbon quantum dots by using cheap source materials and simple preparation method. They exhibit one shifting blue emission band and two close immobile green bands. They have large Stokes shifts ranging from 0.68 to 1.01 eV and large quantum yields as high as 60%. The three types of emissions are competitive and their intensities vary sensitively and differently with pH. Moreover, their emission intensity versus excitation power curves followI(P)∝Pkwithkvalues significantly smaller than unity. The blue emission follows the stretched exponential decay law with an intermediate lifetime of ∼3.9 ns and a lifetime-dispersion factor of ∼0.85 whereas the two green emissions exhibit faster and slower decays with respective lifetimes of around 2.0 and 13.0 ns. The results reveal that the blue emission originates from an ensemble of emission sites exhibiting quantum confinement-like effect and two green emissions stem from pH-sensitive surface functional groups-associated fluorophores.

Preparation of Novel Magnetic Nanomaterials Based on "Facile Coprecipitation" for Developing Latent Fingerprints (LFP) in Crime Scenes

Recently, the application of novel nanomaterials, especially magnetic nanomaterials in the development of latent fingerprints (LFP), has become the hot focus for forensic scientists and criminal investigators. As a type of recyclable, environment-friendly material, Fe₃O₄ nanoparticles achieve a wonderful effect in visualization of LFP. We first report the synthesis and encapsulation of nano-Fe₃O₄ through "facile coprecipitation", (3-mercaptopropyl)triethoxysilane was covalently embedded into Fe₃O₄ nanoparticles, and the Fe₃O₄ core was encapsulated by the nanosilver to prepare novel magnetic nanomaterials (P-MNP@Ag) with the core-shell configuration. For comparison, the magnetic nanomaterials (S-MNP@Ag) were prepared by surface modification. Their composition, structure, and properties were characterized by SEM, TEM, XRD, IR, XPS, and VSM. Compared with commercially available gold powder, silver powder, bare magnetic powder, and prepared S-MNP@Ag, the development effect of LFP on different objects by using P-MNP@Ag had better performance, which presented the advantages of low background interference, high sensitivity, and clear secondary details in LFP. In the crime scenes of some influential cases, P-MNP@Ag had been applied to the visualization of LFP. The biometric identification of criminal suspects was confirmed through fingerprint comparison, which was highly affirmed by the public security department.

Acoustomicrofluidic Concentration and Signal Enhancement of Fluorescent Nanodiamond Sensors

Diamond nitrogen-vacancy (NV) centers constitute a promising class of quantum nanosensors owing to the unique magneto-optic properties associated with their spin states. The large surface area and photostability of diamond nanoparticles, together with their relatively low synthesis costs, make them a suitable platform for the detection of biologically relevant quantities such as paramagnetic ions and molecules in solution. Nevertheless, their sensing performance in solution is often hampered by poor signal-to-noise ratios and long acquisition times due to distribution inhomogeneities throughout the analyte sample. By concentrating the diamond nanoparticles through an intense microcentrifugation effect in an acoustomicrofluidic device, we show that the resultant dense NV ensembles within the diamond nanoparticles give rise to an order-of-magnitude improvement in the measured acquisition time. The ability to concentrate nanoparticles under surface acoustic wave (SAW) microcentrifugation in a sessile droplet is, in itself, surprising given the well-documented challenge of achieving such an effect for particles below 1 μm in dimension. In addition to a demonstration of their sensing performance, we thus reveal in this work that the reason why the diamond nanoparticles readily concentrate under the SAW-driven recirculatory flow can be attributed to their considerably higher density and hence larger acoustic contrast compared to those for typical particles and cells for which the SAW microcentrifugation flow has been shown to date.

Highly stable cesium lead bromide perovskite nanocrystals for ultra-sensitive and selective latent fingerprint detection

Latent fingerprints (LFPs) are one of the most important forms of evidence in crime scenes due to the uniqueness and permanence of the friction ridges in fingerprints. Therefore, an efficient method to detect LFPs is crucial in forensic science. However, there remain several challenges with traditional detection strategies including low sensitivity, low contrast, high background, and complicated processing steps. In order to overcome these drawbacks, we present an approach for developing latent fingerprints using stabilized CsPbBr₃ perovskite nanocrystals (NCs) as solid-state nanopowders. We demonstrate the superior optical stability of CsPbBr₃ NCs with respect to absorption, photoluminescence (PL), and fluorescence lifetime. We then used these highly stable, fluorescent CsPbBr₃ NCs as a powder dusting material to develop LFPs on diverse surfaces. The stable optical properties and hydrophobic surface of the CsPbBr₃ NC nanopowder permitted high resolution images from which unique features of friction ridge arrangements with first, second, and third-level LFP details can be obtained within minutes.

The facile preparation of solid-state fluorescent carbon dots with a high fluorescence quantum yield and their application in rapid latent fingerprint detection

Because of direct π-π interactions and excessive energy resonance transfer, it is very challenging to prepare carbon dots (CDs) with a high fluorescence quantum yield (QY) in the solid state. In this study, novel CDs which gave solid-state fluorescence (SSF) with high brightness were successfully prepared via a simple microwave-assisted method. The prepared ScCDs can emit strong blue fluorescence in the solid state, and the absolute QY of this ScCDs powder reaches 51.7%. Such a high QY means that the ScCDs powder could be successfully applied in rapid latent fingerprint (LFP) detection. The LFP detection performance of this ScCDs powder was studied in detail, and the results show that the LFPs developed using the ScCDs powder can be visualized with high definition and contrast under different conditions. This research not only developed a new type of SSF-emitting CDs, but it also proved that the developed CDs have great potential for applications in LFP detection, and this research may also provide inspiration and ideas for the design of new SSF-emitting CDs.

Fluorescent Cationic Conjugated Polymer-Based Adaptive Developing Strategy for Both Sebaceous and Blood Fingerprints

Both latent sebaceous and blood fingerprints may provide valuable information for forensic investigation. To detect both types of fingerprints with no need to predistinguish them, a new adaptive developing strategy was proposed. A cationic conjugated polymer with poly[p-(phenylene ethylene)-alt-(thienylene ethynylene)] backbone (PPETE-NMe₃⁺) was synthesized, which was dissolved in N,N-dimethylformamide (DMF) to form the developing solution. Fingerprints were developed by a simple dropping and incubating process without any pre-/post-treatments. Fluorescent photographs of the developed fingerprints on various substrates demonstrated that this developing strategy was effective for both types of fingerprints on nonporous substrates. Gray value analysis further confirmed the enhancement of the legibility of the fingerprint images. The preliminary mechanism exploration suggested that certain weak interactions, such as hydrophobic interaction and electrostatic interaction, may synergistically contribute to the interaction between the polymer and fingerprint components. The molecular design of the polymer combined with an appropriate solvent endowed the developing system the adaptiveness toward different types of fingerprints. This adaptive developing strategy made the fingerprint-developing process more efficient and may be further extended to more practical application scenes.

Highly Stable, Nondestructive, and Simple Visualization of Latent Blood Fingerprints Based on Covalent Bonding Between the Fluorescent Conjugated Polymer and Proteins in Blood

Latent blood fingerprints (LBFPs) can provide critical information of foul play and help identify the suspects at violent crime scenes. The current methods for LBFP visualization are still not satisfactory because of the low sensitivity or complicated protocol. This study demonstrates a simple and effective LBFP visualization strategy by integrating a new amphiphilic fluorescent amino-functionalized conjugated polymer with the cotton-pad developing protocol. LBFPs on various substrates are visualized by simply covering them with the polymer solution-soaked cotton pads. The images display clear fingerprint patterns, ridge details, and sweat pores, even on very challenging substrates such as painted wood and multicolored can. The gray value analysis confirms semiquantitatively the enhancement of the contrast between ridges and furrows. Even LBFPs with various contaminations or aged for more than 600 days are effectively developed and visualized. The developed fingerprint images show superior stability over long storage time and against solvent washing. Moreover, the polymer causes no degradation of DNAs in the blood, suggesting the possibility of further DNA profiling and identification after development. The mechanistic investigation suggests that the formation of positive or inverted images can be attributed to the synergistic effects from the affinity between polymer and blood, and the affinity betwen polymer and substrate, as well as the slight quenching of polymer fluorescence by blood. Furthermore, the covalent bonding between the protonated primary amino group and proteins in blood endows the stability of the developed fingerprints. The result rationalizes the molecular design of the fluorescent polymer and sheds new light on the future strategies to effective LBFP visualization in practical applications.

Influence of crystallization temperature on fluorescence of n-diamond quantum dots

Nanodiamonds are popular biological labels because of their superior mechanical and optical properties. Their surfaces bridging the core and surrounding medium play a key role in determining their bio-linkage and photophysical properties. n-diamond is a mysterious carbon allotrope whose crystal structure remains debated. We study the influence of the crystallization temperature on the fluorescence properties of the colloidal n-diamond quantum dots (n-DQDs) with sizes of several nanometers. They exhibit multiband fluorescence across the whole visible region which depends sensitively on the crystallization temperature. Their surfaces turn from hydrophobic ones rich of sp²-bonded carbon into hydrophilic ones rich of carboxyl derivatives and hydroxyl groups as the crystallization temperature increases. The different surface states correlated with the surface structures account for the distinct fluorescence properties of the n-DQDs crystallized at different temperatures. These high-purity ultrasmall n-DQDs with tunable surface chemistry and fluorescence properties are promising multicolor biomarkers and lighting sources.

Synergetic Effect of Tetraethylammonium Bromide Addition on the Morphology Evolution and Enhanced Photoluminescence of Rare-Earth Metal-Organic Frameworks

Controlled synthesis of rare-earth metal-organic frameworks (RE-MOFs) is of great significance to match their emerging multifunctional luminescence applications. Herein, we propose a green and general solvent-free synthetic strategy for the adjustment of morphology and dimension of various RE-MOFs (RE = Eu, Tb, Er, Dy, Y, Tm) by using a tetraethylammonium bromide-assisted thermal-heating method. These self-assembled RE-MOF materials possess controllable morphologies and hierarchical structures while retaining the structural topology of MIL-78, proving that the strategy is a feasible and effective way in opening up large-scale synthesis of RE-MOFs. It is further found that the tetraethylammonium could be carbonized into carbon dots and encapsulated in Eu/Tb-MIL-78 to enhance the fluorescence emission intensities significantly, making the hierarchical Eu/Tb-MIL-78 MOF materials good candidates for the latent fingerprints recognition application. This work provides a novel strategy for effectively controlling the morphology and dimension of RE-MOFs materials with enhanced photoluminescence and has great potential in their scaling-up syntheses and exploring the new luminescence applications.

Carbon Dots as New Generation Materials for Nanothermometer: Review

Highly sensitive non-contact mode temperature sensing is substantial for studying fundamental chemical reactions, biological processes, and applications in medical diagnostics. Nanoscale-based thermometers are guaranteeing non-invasive probes for sensitive and precise temperature sensing with subcellular resolution. Fluorescence-based temperature sensors have shown great capacity since they operate as "non-contact" mode and offer the dual functions of cellular imaging and sensing the temperature at the molecular level. Advancements in nanomaterials and nanotechnology have led to the development of novel sensors, such as nanothermometers (novel temperature-sensing materials with a high spatial resolution at the nanoscale). Such nanothermometers have been developed using different platforms such as fluorescent proteins, organic compounds, metal nanoparticles, rare-earth-doped nanoparticles, and semiconductor quantum dots. Carbon dots (CDs) have attracted interest in many research fields because of outstanding properties such as strong fluorescence, photobleaching resistance, chemical stability, low-cost precursors, low toxicity, and biocompatibility. Recent reports showed the thermal-sensing behavior of some CDs that make them an alternative to other nanomaterials-based thermometers. This kind of luminescent-based thermometer is promising for nanocavity temperature sensing and thermal mapping to grasp a better understanding of biological processes. With CDs still in its early stages as nanoscale-based material for thermal sensing, in this review, we provide a comprehensive understanding of this novel nanothermometer, methods of functionalization to enhance thermal sensitivity and resolution, and mechanism of the thermal sensing behavior.