Multifunctional Role of MoS2 in Preparation of Composite Hydrogels: Radical Initiation and Cross-Linking

Advances in the Use of Conducting Polymers for Healthcare Monitoring

Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.

Preparation and optimization of agarose or polyacrylamide/amino acid-based double network hydrogels for photocontrolled drug release

The high water content and biocompatibility of amino-acid-based supramolecular hydrogels have generated growing interest in drug delivery research. Nevertheless, the existing dominant approach of constructing such hydrogels, the exploitation of a single amino acid type, typically comes with several drawbacks such as weak mechanical properties and long gelation times, hindering their applications. Here, we design a near-infrared (NIR) light-responsive double network (DN) structure, containing amino acids and different synthetic or natural polymers, i.e., polyacrylamide, poly(N-isopropylacrylamide), agarose, or low-gelling agarose. The hydrogels displayed high mechanical strength and high drug-loading capacity. Adjusting the ratio of Fmoc-Tyr-OH/Fmoc-Tyr(Bzl)-OH or Fmoc-Phe-OH/Fmoc-Tyr(Bzl)-OH, we could drastically shorten the gelation time of the DN hydrogels at room and body temperatures. Moreover, introducing photothermal agents (graphene oxide, carbon nanotubes, molybdenum disulfide nanosheets, or indocyanine green), we equipped the hydrogels with NIR responsivity. We demonstrated the light-triggered release of the drug baclofen, which is used in severe spasticity treatment. Rheology and stability tests confirmed the positive impact of the polymers on the mechanical strength of the hydrogels, while maintaining good stability under physiological conditions. Overall, our study contributed a novel hydrogel formulation with high mechanical resistance, rapid gel formation, and efficient NIR-controlled drug release, offering new opportunities for biomedical applications.

Covalently Functionalized MoS2 Initiated Gelation of Hydrogels for Flexible Strain Sensing

Transition metal dichalcogenides (TMDs), with superior mechanical and electrical conductivity, are one of the most promising two-dimensional materials for creating a generation of intelligent and flexible electronic devices. However, due to the high van der Waals and electrostatic attraction, TMD nanomaterials tend to aggregate in dispersants to achieve a stable state, thus severely limiting their further applications. Surface chemical modification is a common strategy for improving the dispersity of TMD nanomaterials; however, there are still constraints such as limited functionalization methods, low grafting rate, and difficult practice application. Thus, it is challenging to develop innovative surface modification systems. Herein, we covalently modify an olefin molecule on surface-inert MoS₂, and the modified MoS₂ can be used as not only a catalyst for hydrogel polymerization, but also a cross-linker in the hydrogel network. Specifically, allyl is covalently grafted onto chemically exfoliated MoS₂, and this modified MoS₂ can be uniformly dispersed in polar solvents (such as acetone, N,N-dimethylformamide, and ethanol), remaining stable for more than 2 weeks. The allyl-modified MoS₂ can catalyze the polymerization of polyacrylamide hydrogel and then integrate in the network, which increases the tensile strength of the composite hydrogel. The flexible sensor based on the composite hydrogel exhibits an ideal operating range of 600% and a quick response time of 150 ms. At the same time, the flexible device can also track the massive axial stretching movements of human joints, making it a reliable option for the next wave of wearable sensing technology.

Click Chemistry: A Promising Tool for Building Hierarchical Structures

The hierarchical structures are utilized at different levels in nature. Moreover, a wide spectrum of nature’s properties (e.g., mechanical, physical and biological properties) has been attributed to this hierarchy. Different reviews have been published to cover the use of click chemistry in building hierarchical structures. However, each one of those reviews focused on a narrow area on this topic, i.e., specific chemical reaction, such as in thiol-ene chemistry, or a specific molecule or compound such as polyhedral oligomeric silsesquioxane, or a certain range of hierarchical structures between the nano to micro range, e.g., nanocrystals. In this review, a frame to connect the dots between the different published works has been demonstrated. This article will not attempt to give an exhaustive review of all the published work in the field, instead the potential of click chemistry to build hierarchical structures of different levels using building blocks of different length scales has been shown through two main approaches. The first is a one-step direct formation of 3D micro/macrometer dimensions structures from Pico dimensions structures (molecules, monomers, etc.). The second approach includes several steps Pico ➔ 0D nano ➔ 1D nano ➔ 2D nano ➔ 3D nano/micro/macro dimensions structures. Another purpose of this review article is to connect between (a) the atomic theory, which covers the atoms and molecules in the picometer dimensions (picoscopic chemistry set); (b) “nano-periodic system” model, which covers different nanobuilding blocks in the nanometers range such as nanoparticles, dendrimers, buckyball, etc. which was developed by Tomalia; and (c) the micro/macrometer dimensions level.

Graphene oxide based crosslinker for simultaneous enhancement of mechanical toughness and self-healing capability of conventional hydrogels

Extraordinary self-healing efficiency is rarely observed in mechanically strong hydrogels, which often limits the applications of hydrogels in biomedical engineering. We have presented an approach to utilize a special type of graphene oxide-based crosslinker (GOBC) for the simultaneous improvement of toughness and self-healing properties of conventional hydrogels. The GOBC has been prepared from graphene oxide (GO) by surface oxidation and further introduction of vinyl groups. It has been designed in such a way that the crosslinker is able to form both covalent bonds and noncovalent interactions with the polymer chains of hydrogels. To demonstrate the efficacy of GOBC, it was incorporated in a conventional polyacrylamide (PAM) and polyacrylic acid (PAA) hydrogel matrix, and the mechanical and self-healing properties of the prepared hydrogels were investigated. In PAM-GOBC hydrogels, it has been observed that the mechanical properties such as tensile strength, Young's modulus, and toughness are significantly improved by the incorporation of GOBC without compromising the self-healing efficiency. The PAM-GOBC hydrogel with a modulus of about 0.446 MPa exhibited about 70% stress healing efficiency after 40 h. Whereas, under the same conditions a PAM hydrogel with commonly used crosslinker N,N′-methylene-bis(acrylamide) of approximately the same modulus demonstrated no self-healing at all. Similar improvement of self-healing properties and toughness in PAA-GOBC hydrogel has also been observed which demonstrated the universality of the crosslinker. This crosslinker-based approach to improve the self-healing properties is expected to offer the possibility of the application of commonly used hydrogels in many different sectors, particularly in developing artificial tissues.

Introduction of a two-dimensional graphene oxide-based crosslinker simultaneously improve the mechanical and self-healing properties of hydrogels by offering an interesting combination of covalent and reversible hydrogen bonds to polymer backbones.

A Novel Self-Healing Hydrogel Based on Derivatives of Natural α-Amino Acids with Potential Applications as a Strain Sensor

We successfully synthesized a novel hydrogel based on derivatives of natural α-amino acids: ornithine and cystine. To make ornithine attachable to the polymer chain, the δ-amino group was modified with...

MoS2-Embedded, Interpenetrating Network Composite Hydrogels that Show Controlled Release of Dyes and Tunable Strength

This paper describes a conceptual design of hierarchical composite hydrogels. The hydrogel materials comprise MoS2 flakes and interpenetrating polymer networks, and further exhibit controlled release and tunable strength that are caused by the synergistic combination of select components. In terms of design, MoS2 flakes initiate radical polymerization of chosen monomers and simultaneously provide physical cross-linking points, both of which afford a primary composite network. Then, the sequential formation of additional networks results in functional, hierarchical, composite hydrogels. Therefore, we were able to demonstrate double-network hydrogels as a stimuli-responsive vector for programmed release of cargo molecules in response to heat or light or to form triple-network hydrogels showing tunable mechanical strength owing to intermolecular interaction between charged monomers and MoS2 flakes. The design concept would be expanded by incorporating other chalcogenides or functional monomers, which advance the properties and functionalities of materials and broadens the versatility of nanocomposite hydrogels.

Recent Progress on Molecular Photoacoustic Imaging with Carbon-Based Nanocomposites

For biomedical imaging, the interest in noninvasive imaging methods is ever increasing. Among many modalities, photoacoustic imaging (PAI), which is a combination of optical and ultrasound imaging techniques, has received attention because of its unique advantages such as high spatial resolution, deep penetration, and safety. Incorporation of exogenous imaging agents further amplifies the effective value of PAI, since they can deliver other specified functions in addition to imaging. For these agents, carbon-based materials can show a large specific surface area and interesting optoelectronic properties, which increase their effectiveness and have proved their potential in providing a theragnostic platform (diagnosis + therapy) that is essential for clinical use. In this review, we introduce the current state of the PAI modality, address recent progress on PAI imaging that takes advantage of carbon-based agents, and offer a future perspective on advanced PAI systems using carbon-based agents.

Self-healable and flexible supramolecular gelatin/MoS2 hydrogels with molecular recognition properties

Two-dimensional MoS₂ is emerging as a unique platform for a wide range of biomedical applications including extracellular matrix mimics, drug delivery systems and antimicrobial agents. However, low processability and nonspecific interactions at biointerfaces are serious challenges that hamper the biomedical applications of this nanomaterial. Herein, we show how specific interactions between MoS₂ and a gelatin matrix results in a biomimetic hydrogel with the self-healing and molecular recognition properties. β-Cyclodextrin was conjugated to the surface of freshly exfoliated MoS₂ through a one pot nucleophilic substitution reaction and the obtained cyclodextrin-functionalized MoS₂ was used to construct an injectable, self-healable and flexible supramolecular hydrogel upon host-guest interactions with adamantane-modified gelatin matrix. Incorporation of almost 1 wt% of CDMoS₂ into gelatin matrix with 1cm² cross-section resulted in a hydrogel that was able to tolerate one hundred grams. Also, storage modulus (G'), loss modulus (G″) of the obtained hydrogel was 10 and 25 times higher than that for the neat gelatin, respectively. Due to its self-healing, molecular recognition and mechanical properties as well as its flexibility, injectability, and processability, MoS₂gel is a promising candidate for a wide range of future biomedical applications including extracellular matrix mimics and tissue engineering.

Microporous Organic Polymers: A Synthetic Platform for Engineering Heterogeneous Carbocatalysts

The conceptual, bottom-up design of functional carbon materials from microporous organic polymers was investigated. Owing to their structural rigidity and synthetic flexibility, the porous polymers streamlined the thermal carbonization process while excluding the need for exogenous additives or extra synthesis procedures and allowed for simultaneous elemental engineering of the resultant carbonaceous materials. As designed, heteroatoms such as nitrogen and sulfur could be uniformly incorporated into the carbon matrices from the microporous polymers during thermal carbonization with a concomitant change in the macroscopic properties of the materials. In particular, doping with sulfur atoms could provide reactive sites, thereby conferring superior catalytic performance to the carbon materials. This study demonstrates expansion of the capability of microporous polymers as a functional carbon source and advances the synthetic concept for carbonaceous materials.

Fibrous mesoporous polymer monoliths: macromolecular design and enhanced photocatalytic degradation of aromatic dyes

A bottom-up design provides polymer monoliths comprising two monomers that form mesoporous, compressible, random fiber networks, as in marine sponges.

Designing Internal Hierarchical Porous Networks in Polymer Monoliths that Exhibit Rapid Removal and Photocatalytic Degradation of Aromatic Pollutants

This paper describes the preparation of 3D polymer monoliths containing internal hierarchical porosity. The porous networks are fabricated based on Pickering high-internal-phase emulsions (HIPEs) stabilized by microporous β-cyclodextrin-based polymer particles (CDPs) as the emulsifier; CDPs are facilely synthesized by the polyaddition reactions without the need for catalysts. The designed Pickering agents enable to form a bicontinuous internal phase in 8:2 cyclohexane-water v/v, and the oil droplets in the continuous water phase is found to be fairly stable up to 1 month. Furthermore, the addition of acrylamide and N,N'-methylenebis(acrylamide) results in polymer networks after in situ thermal polymerization at 60 °C in the water phase, and the monoliths include both interconnected macropores from the HIPE template and micro- and mesopores from the CDPs embedded at the interface. The porous monoliths rapidly absorb a variety of solvents taking advantage of multiscale porosity and amphiphilicity. Furthermore, the materials can be efficiently used for the removal of aromatic pollutants and then reused after washing and drying without the deterioration of performance. Also, they exhibit high photocatalytic capability and good recyclability as being used as a catalytic support when embedded with titanium dioxide (TiO₂ ).