High Heat Flux Evaporation of Low Surface Tension Liquids from Nanoporous Membranes

Unraveling the Regimes of Interfacial Thermal Conductance at a Solid/Liquid Interface

The interfacial thermal conductance at a solid/liquid interface (G) exhibits an exponential-to-linear crossover with increasing solid/liquid interaction strength, previously attributed to the relative strength of solid/liquid to liquid/liquid interactions. Instead, using a simple Lennard-Jones setup, our molecular simulations reveal that this crossover occurs due to the onset of solidification in the interfacial liquid at high solid/liquid interaction strengths. This solidification subsequently influences interfacial energy transport, leading to the crossover in G. We use the overlap between the spectrally decomposed heat fluxes of the interfacial solid and liquid to pinpoint when "solid-like energy transport" within the interfacial liquid emerges. We also propose a novel decomposition of G into (i) the conductance right at the solid/liquid interface and (ii) the conductance of the nanoscale interfacial liquid region. We demonstrate that the rise of solid-like energy transport within the interfacial liquid influences the relative magnitude of these conductances, which in turn dictates when the crossover occurs. Our results can aid engineers in optimizing G at realistic interfaces, critical to designing effective cooling solutions for electronics among other applications.

Hygroscopic cooling (h-cool) fabric with highly efficient sweat evaporation and heat dissipation for personal thermo-moisture management

Moisture evaporation plays a crucial role in thermal management of human body, particularly in perspiration process. However, current fabrics aim for sweat removal and takes little account of basic thermo-regulation of sweat, resulted in their limited evaporation capacity and heat dissipation at moderate/intense scenarios. In this study, a hygroscopic cooling (h-cool) fabric based on multi-functional design, for personal perspiration management, was described. By using economic and effective weaving technology, directional moisture transport routes and heat conductive pathways were incorporated in the construct. The resultant fabric showed 10 times greater one-way transport index higher than cotton, Dri-FIT and Coolswitch fabrics, which contributed to highly enhanced evaporation ability (∼4.5 times than cotton), not merely liquid diffusion. As a result, h-cool fabric performed 2.1-4.2 °C cooling efficacy with significantly reduced sweat consuming than cotton, Dri-FIT and Coolswitch fabrics in the artificial sweating skin. Finally, the practical applications by actually wearing h-cool fabric showed great evaporative-cooling efficacy during different physical activities. Owing to the excellent thermo-moisture management ability, we expect the novel concept and construct of h-cool fabric can provide promising strategy for developing functional textiles with great "cool" and comfortable "dry" tactile sensation at various daily scenarios.

Nanoscale Meniscus Dynamics in Evaporating Thin Films: Insights from Molecular Dynamics Simulations

Evaporation studies are focused on unraveling heat transfer and flow dynamics near the solid-liquid-vapor contact line, particularly focusing on the meniscus, which encompasses the nonevaporating adsorbed layer, thin-film, and bulk meniscus regions. Continuum models assume that there are no evaporating adsorbed layers due to the strong intermolecular forces. However, recent molecular dynamics (MD) simulations have unveiled the significant role of adsorbed layers in thin-film evaporation. Leveraging a recently published energy-based interface detection method, the current study presents nonequilibrium MD simulation results for thin-film evaporation from a phase-change-driven nanopump using liquid argon confined between parallel platinum plates. Notably, unlike the transient simulations often encountered in the literature, the simulation system achieves a statistically steady transport. In this context, we showcase the shapes of the evaporating menisci for two distinct channel heights, 8 and 16 nm, and elucidate the underlying flow physics through velocity vectors and temperature contours. This comprehensive investigation advances our understanding of thin-film evaporation and its mechanisms, offering insights that span from nanoscale phenomena to broader thermal management applications.

Mesoscopic Model for Disjoining Pressure Effects in Nanoscale Thin Liquid Films and Evaporating Extended Meniscuses

Disjoining pressure effect is the key to describe contact line dynamics, micro/nanoscale liquid-vapor phase change heat transfer, and liquid transport in nanopores. In this paper, by combining a mesoscopic approach for nanoscale liquid-vapor interfacial transport and a mean-field approximation of the long-range solid-fluid molecular interaction, a mesoscopic model for the disjoining pressure effect in nanoscale thin liquid films is proposed. The capability of this model to delineate the disjoining pressure effect is validated. We demonstrate that the Hamaker constant determined from our model agrees very well with molecular dynamics (MD) simulation and that the transient evaporation/condensation mass flux predicted by this mesoscopic model is also consistent with the kinetic theory. Using this model, we investigate the characteristics of the evaporating extended meniscus in a nanochannel. The nonevaporating film region, the evaporating thin-film region, and the intrinsic meniscus region are successfully captured by our model. Our results suggest that the apparent contact angle and thickness of the nonevaporating liquid film are self-tuned according to the evaporation rate, and a higher evaporation rate results a in larger apparent contact angle and thinner nonevaporating liquid film. We also show that disjoining pressure plays a dominant role in the nonevaporating film region and suppresses the evaporation in this region, while capillary pressure dominates the intrinsic meniscus region. Strong evaporation takes place in the thin-film region, and both the disjoining pressure and capillary pressure contribute to the total pressure difference that delivers the liquid from the intrinsic meniscus region to the evaporating thin-film region, compensating for the liquid mass loss due to strong evaporation. Our work provides a new avenue for investigating thin liquid film spreading, liquid transport in nanopores, and microscopic liquid-vapor phase change heat/mass transfer mechanisms near the three-phase contact line region.

Tailorable Lignocellulose-Based Aerogel to Achieve the Balance between Evaporation Enthalpy and Water Transport Rate for Efficient Solar Evaporation

Solar-driven interfacial evaporation technology has become an effective approach to alleviate freshwater shortage. To improve its evaporation efficiency, the pore-size dependence of the water transport rate and evaporation enthalpy in the evaporator should be further investigated. Based on the transportation of water and nutrients in natural wood, we facilely designed a lignocellulose aerogel-based evaporator using carboxymethyl nanocellulose (CMNC) cross-linking, bidirectional freezing, acetylation, and MXene-coating. The pore size of the aerogel was adjusted by controlling its CMNC content. When the channel diameter of the aerogel-based evaporator increased from 21.6 to 91.9 μm, the water transport rate of the proposed evaporator increased from 31.94 to 75.84 g min^-1, while its enthalpy increased from 1146.53 to 1791.60 kJ kg^-1. At a pore size of 73.4 μm, the evaporation enthalpy and water transport rate of the aerogel-based evaporator achieved a balance, leading to the best solar evaporation rate (2.86 kg m^-2 h^-1). The evaporator exhibited excellent photothermal conversion efficiency (93.36%) and salt resistance (no salt deposition after three cycles of 8 h). This study could guide the development of efficient solar-driven evaporators for seawater desalination.

Thermal transport across copper-water interfaces according to deep potential molecular dynamics

Nanoscale thermal transport at solid-liquid interfaces plays an essential role in many engineering fields. This work performs deep potential molecular dynamics (DPMD) simulations to investigate thermal transport across copper-water interfaces. Unlike traditional classical molecular dynamics (CMD) simulations, we independently train a deep learning potential (DLP) based on density functional theory (DFT) calculations and demonstrated its high computational efficiency and accuracy. The trained DLP predicts radial distribution functions (RDFs), vibrational densities of states (VDOS), density curves, and thermal conductivity of water confined in the nanochannel at a DFT accuracy. The thermal conductivity decreases slightly with an increase in the channel height, while the influence of the cross-sectional area is negligible. Moreover, the predicted interfacial thermal conductance (ITC) across the copper-water interface by DPMD is 2.505 × 10⁸ W m^-2 K^-1, the same order of magnitude as the CMD and experimental results but with a high computational accuracy. This work seeks to simulate the thermal transport properties of solid-liquid interfaces with DFT accuracy at large-system and long-time scales.

The Critical Diameter for Continuous Evaporation Is between 3 and 4 nm for Hydrophilic Nanopores

Evaporation studies of water using classical molecular dynamics simulations are largely limited due to their high computational expense. This study addresses that issue by developing coarse-grained molecular dynamics models based on Morse potential. Models are optimized based on multi-temperature and at room temperature using machine learning techniques like Genetic Algorithm, Nelder-Mead algorithm, and Strength Pareto Evolutionary Algorithm. The multi-temperature-based model named as Morse-D is found to be more accurate than the single temperature model in representing the water properties at higher temperatures. Using this Morse-D water model, evaporation from hydrophilic nanopores with pore diameter varying from 2 to 5 nm is studied. Our results show that the critical diameter to initiate continuous evaporation at nanopores lies between 3 and 4 nm. A maximum heat flux of 21.3 kW/cm² is observed for a pore diameter of 4.5 nm and a maximum mass flow rate of 16.2 ng/s for a pore diameter of 5 nm. The observed heat flux is an order of magnitude times larger than the currently reported values from experiments in the literature for water, which indicates that we need to focus on nanoscale evaporation to enhance the critical heat flux.

Integrated cooling (i-Cool) textile of heat conduction and sweat transportation for personal perspiration management

Perspiration evaporation plays an indispensable role in human body heat dissipation. However, conventional textiles tend to focus on sweat removal and pay little attention to the basic thermoregulation function of sweat, showing limited evaporation ability and cooling efficiency in moderate/profuse perspiration scenarios. Here, we propose an integrated cooling (i-Cool) textile with unique functional structure design for personal perspiration management. By integrating heat conductive pathways and water transport channels decently, i-Cool exhibits enhanced evaporation ability and high sweat evaporative cooling efficiency, not merely liquid sweat wicking function. In the steady-state evaporation test, compared to cotton, up to over 100% reduction in water mass gain ratio, and 3 times higher skin power density increment for every unit of sweat evaporation are demonstrated. Besides, i-Cool shows about 3 °C cooling effect with greatly reduced sweat consumption than cotton in the artificial sweating skin test. The practical application feasibility of i-Cool design principles is well validated based on commercial fabrics. Owing to its exceptional personal perspiration management performance, we expect the i-Cool concept can provide promising design guidelines for next-generation perspiration management textiles.

Enhanced Evaporation of Ultrathin Water Films on Silicon-Terminated Si3N4 Nanopore Membranes

Water evaporation confined in nanoscale is a ubiquitous phenomenon in nature and has crucial importance in a broad range of technical applications. With the nonequilibrium molecular dynamics simulation, we elucidate nanothin water film evaporation characteristics on a silicon nitride nanopore membrane considering the effects of pore size and pore chemistry. Pore chemistry plays the main role in regulating the evaporation flux. The terminated Si atoms on the pore surface lead to a higher evaporation intensity than the N ones. We attribute this enhancement to the transition of the structural properties of fluid, where liquid molecules are packed loosely and disorderedly under the inducement of terminated silicon atoms. The findings in the present work can contribute to the fundamental understanding of the nanopore-enhanced evaporation process and provide new guidance to the design of advanced nanopore membrane materials.

Cellular fluidics

The natural world provides many examples of multiphase transport and reaction processes that have been optimized by evolution. These phenomena take place at multiple length and time scales and typically include gas-liquid-solid interfaces and capillary phenomena in porous media^1,2. Many biological and living systems have evolved to optimize fluidic transport. However, living things are exceptionally complex and very difficult to replicate^3-5, and human-made microfluidic devices (which are typically planar and enclosed) are highly limited for multiphase process engineering^6-8. Here we introduce the concept of cellular fluidics: a platform of unit-cell-based, three-dimensional structures-enabled by emerging 3D printing methods^9,10-for the deterministic control of multiphase flow, transport and reaction processes. We show that flow in these structures can be 'programmed' through architected design of cell type, size and relative density. We demonstrate gas-liquid transport processes such as transpiration and absorption, using evaporative cooling and CO₂ capture as examples. We design and demonstrate preferential liquid and gas transport pathways in three-dimensional cellular fluidic devices with capillary-driven and actively pumped liquid flow, and present examples of selective metallization of pre-programmed patterns. Our results show that the design and fabrication of architected cellular materials, coupled with analytical and numerical predictions of steady-state and dynamic behaviour of multiphase interfaces, provide deterministic control of fluidic transport in three dimensions. Cellular fluidics may transform the design space for spatial and temporal control of multiphase transport and reaction processes.

Evaporation in nano/molecular materials

Evaporation is a physical phenomenon with fundamental significance to both nature and technology ranging from plant transpiration to DNA engineering. Various analytical and empirical relationships have been proposed to characterize evaporation kinetics at macroscopic scales. However, theoretical models to describe the kinetics of evaporation from nano and sub-nanometer (molecular) confinements are absent. On the other hand, the fast advancements in technology concentrated on development of nano/molecular-scale devices demand appropriate models that can accurately predict physics of phase-change in these systems. A thorough understanding of the physics of evaporation in nano/molecular materials is, thus, of critical importance to develop the required models. This understanding is also crucial to explain the intriguing evaporation-related phenomena that only take place when the characteristic length of the system drops to several nanometers. Here, we comprehensively review the underlying physics of evaporation phenomenon and discuss the effects of nano/molecular confinement on evaporation. The role of liquid-wall interface-related phenomena including the effects of disjoining pressure and flow slippage on evaporation from nano/molecular confinements are discussed. Different driving forces that can induce evaporation in small confinements, such as heat transfer, pressure drop, cavitation and density fluctuations are elaborated. Hydrophobic confinement induced evaporation and its potential application for synthetic ion channels are discussed in detail. Evaporation of water as molecular clusters rather than isolated molecules is discussed. Despite the lack of experimental investigations on evaporation at nanoscale, there exist an extensive body of literature that have applied different simulation techniques to predict the phase change behavior of liquids in nanoconfinements. We infer that exploring the effect of electrostatic interactions and flow slippage to enhance evaporation from nanoconduits is an interesting topic for future endeavors. Further future studies could be devoted to developing nano/molecular channels with evaporation-based gating mechanism and utilization of 2D materials to tune energy barrier for evaporation leading to enhanced evaporation.

New Model for Liquid Evaporation and Vapor Transport in Nanopores Covering the Entire Knudsen Regime and Arbitrary Pore Length

Liquid evaporation and the associated vapor transport in micro/nanopores are ubiquitous in nature and play an important role in industrial applications. Accurate modeling of the liquid evaporation process in nanopores is critical to achieving a better design of devices for enhanced evaporation. Although having high impact on evaporation rate, vapor transport resistance in micro/nanopores remains incompletely understood. In this study, we proposed a new model which, for the first time, considered vapor transport in finite-length pores under various Knudsen regimes and then coupled the transport resistance to liquid evaporation. Direct Simulation Monte Carlo and laboratory experiments were conducted to provide validation for our model. The model successfully predicts the variation of pore transmissivity with Knudsen number and nanopore size, which cannot be revealed by prior theories. The relative error of model-predicted evaporation rate was within 1% in L/r = 0 cases and within 3.5% in L/r > 0 cases. Our model is featured by its applicability under the entire range of Knudsen numbers. The evaporation of various types of liquids in arbitrarily sized pores can be modeled using a universal relation.