Defect Engineering in Atomic-Layered Graphitic Carbon Nitride for Greatly Extended Visible-Light Photocatalytic Hydrogen Evolution

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Ultrafast hydrogen production in boron/oxygen-codoped graphitic carbon nitride revealed by nonadiabatic dynamics simulations

Graphitic carbon nitride (g-C3N4 or GCN) shows promise in photocatalytic water splitting, despite facing the challenge of rapid electron-hole recombination. In this study, we investigated the influence of boron/oxygen codoping on the photocatalytic performance of GCN systems for hydrogen generation. First-principles calculations and nonadiabatic molecular dynamics (NAMD) simulations were employed to reveal that the recombination time of photogenerated carriers could be increased by 16% to 64% in the codoped systems compared to the pristine GCN. The time-dependent density functional theory (TDDFT) scheme was utilized to select energy windows and initiate dynamics in cluster models of B/O co-doped heptazine with water molecules. Notably, we observed efficient direct photodissociation of hydrogen atoms from water molecules within 60 fs and proton hops within the hydrogen-bonded network within 80 fs in the co-doped system, diverging from the previously proposed mechanism for pristine heptazine in NAMD simulations. This discovery underscores the significant role of faster proton-coupled electron transfer (PCET) reactions and rapid radiationless relaxation in achieving high photocatalytic efficiency in water splitting. Our work enhances the understanding of the internal mechanism of highly efficient photocatalysts for water splitting and provides a new design strategy for doped GCN.

Highly Accurate Determination of the Total Amount of Pb2+ and Pb(OH)+ in a Natural Water Environment Revealed by Dynamic Simulation and DFT Calculation: Benefit from the Electron Inverse Effect of Pt Nanoclusters over Defective g-C3N4

Although utilizing nanomaterial-modified electrodes for lead ion detection has achieved great success, most of them are carried out under acidic conditions and ignore the variation of Pb(II) speciation at different pH conditions, leading to the potential inaccuracy of Pb(II) detection in a neutral natural water environment. Thus, designing a novel catalyst with high accuracy for the detection of various forms of the total amount of Pb(II) (Pb2+ and Pb(OH)+) in neutral waters is significant. Herein, Pt nanoclusters (Pt NCs) were elaborately constructed and stabilized on the Co single-atom-doped g-C3N4 with abundant N vacancies (Pt NCs/VN-C3N4), which achieved the ultrasensitive detection (102.16 μM μA-1) of Pb(II) in neutral conditions. The dynamic simulation and theoretical calculations reveal that the parallel deposition of Pb2+ and Pb(OH)+ occurs on the electrode surface modified by Pt NCs/VN-C3N4, and the current peaks of Pb(II) are cocontributed by Pb2+ and Pb(OH)+ species. An "electron inverse" phenomenon in Pt NCs/VN-C3N4 from the VN-C3N4 substrate to Pt NCs endows Pt NCs in an electron-rich state, serving as active centers to promote rapid and efficient reduction for both Pb2+ and Pb(OH)+, facilitating the accurate detection of the total amount of Pb(II) in all forms in the actual water environment.

Decade Milestone Advancement of Defect-Engineered g-C3N4 for Solar Catalytic Applications

Over the past decade, graphitic carbon nitride (g-C3N4) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C3N4 is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the "all-in-one" defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultra-active coordinated environment (M-Nx, M-C2N2, M-O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra (fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C3N4 "customization", motivating more profound thinking and flourishing research outputs on g-C3N4-based photocatalysis.

Transforming the Petroleum Industry through Catalytic Oxidation Reactions vis-à-vis Preceramic Polymer Catalyst Supports

Preceramic polymers, for instance, are used in a variety of chemical processing industries and applications. In this contribution, we report on the catalytic oxidation reactions generated using preceramic polymer catalyst supports. Also, we report the full knowledge of the use of the remarkable catalytic oxidation, and the excellent structures of these preceramic polymer catalyst supports are revealed. This finding, on the other hand, focuses on the functionality and efficacy of future applications of catalytic oxidation of preceramic polymer nanocrystals for energy and environmental treatment. The aim is to design future implementations that can address potential environmental impacts associated with fuel production, particularly in downstream petroleum industry processes. As a result, these materials are being considered as viable candidates for environmentally friendly applications such as refined fuel production and related environmental treatment.

Direct Growth of Polymeric Carbon Nitride Nanosheet Photoanode for Greatly Efficient Photoelectrochemical Water-Splitting

A general method for the direct synthesis of highly homogeneous and dense polymerized carbon nitride (PCN) nanosheet films on F: SnO2 (FTO) is developed. Detailed photoelectrochemical (PEC) water-splitting studies reveal that the as-synthesized PCN films exhibit outstanding performance as photoanode for PEC water-splitting. The optimal PCN photoanode exhibits excellent photocurrent density of 650 µA cm-2 , and monochromatic incident photon-to-electron conversion efficiency (IPCE) value up to 30.55% (λ = 400 nm) and 25.97% (λ = 420 nm) at 1.23 VRHE in 0.1 m KOH electrolyte. More importantly, the PCN photoanode has an excellent hole extraction efficiency of up to 70 ± 3% due to the abundance of active sites provided by the PCN photoanode nanosheet, which promotes the transport rates of OER-relevant species. These PCN films provide a new benchmark for PCN photoanode materials.

Acetamide- or Formamide-Assisted In Situ Approach to Carbon-Rich or Nitrogen-Deficient Graphitic Carbon Nitride for Notably Enhanced Visible-Light Photocatalytic Redox Performance

Acetamide- or formamide-assisted in situ strategy is designed to synthesize carbon atom self-doped g-C₃ N₄ (AHCN_x ) or nitrogen vacancy-modified g-C₃ N₄ (FHCN_x ). Different from the direct copolymerization route that suffers from the problem of mismatched physical properties of acetamide (or formamide) with urea, the synthesis of AHCN_x (or FHCN_x ) starts from a crucial preorganization step of acetamide (or formamide) with urea via freeze drying-hydrothermal treatment so that the chemical structures as well as C-doping level in AHCN_x and N-vacancy concentration in FHCN_x can be precisely regulated. By using various structural characterization methods, well-defined AHCN_x and FHCN_x structures are proposed. At the optimal C-doping level in AHCN_x or N-vacancy concentration in FHCN_x , both AHCN_x and FHCN_x exhibit remarkably improved visible-light photocatalytic performance in oxidation of emerging organic pollutants (acetaminophen and methylparaben) and reduction of proton to H₂ in comparison of unmodified g-C₃ N₄ . Combination of the experimental results with theoretical calculations, it is confirmed that AHCN_x and FHCN_x show different charge separation and transfer mechanisms, while the enhanced visible-light harvesting capacity and the localized charge distributions on HOMO and LUMO are responsible for this excellent photocatalytic redox performance of AHCN_x and FHCN_x .

Potassium Molten Salt-Mediated In Situ Structural Reconstruction of a Carbon Nitride Photocatalyst

Metal-free polymeric carbon nitride (PCN) materials are at the forefront of photocatalytic applications. Nevertheless, the overall functionality and performance of bulk PCN are limited by rapid charge recombination, high chemical inertness, and inadequate surface-active sites. To address these, here, we employed potassium molten salts (K⁺X^-, where X^- is Cl^-, Br^-, and I^-) as a template for the in situ generation of surface reactive sites in thermal pyrolyzed PCN. Theoretical calculations imply that addition of KX salts to PCN-forming monomers causes halogen ions to be doped into C or N sites of PCN with a relative trend of halogen ion doping being Cl < Br < I. The experimental results show that reconstructing C and N sites in PCN develops newer reactive sites that are beneficial for surface catalysis. Interestingly, the photocatalytic H₂O₂ generation rate of KBr-modified PCN was 199.0 μmol h^-1, about three times that of bulk PCN. Owing to the simple and straightforward approach, we expect molten salt-assisted synthesis to have wide exploration in modifying PCN photocatalytic activity.

In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂^- and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.

The effect of N-vacancy on the photocatalytic activity of graphitic carbon nitride in the oxidative Mannich reaction

N-vacancy g-CN was used in Mannich oxidative reaction as a photocatalyst, having mid-gap states that enhance reaction kinetics. This facile photocatalyst enabled successful formation of challenging THIQ with EWG and chemo-selectivity on C–C bond.

H2+CO2 Synergistic Plasma Positioning Carboxyl Defects in g-C3N4 with Engineered Electronic Structure and Active Sites for Efficient Photocatalytic H2 Evolution

Defective functional-group-endowed polymer semiconductors, which have unique photoelectric properties and rapid carrier separation properties, are an emerging type of high-performance photocatalyst for various energy and environmental applications. However, traditional oxidation etching chemical methods struggle to introduce defects or produce special functional group structures gently and controllably, which limits the implementation and application of the defective functional group modification strategy. Here, with the surface carboxyl modification of graphitic carbon nitride (g-C3N4) photocatalyst as an example, we show for the first time the feasibility and precise modification potential of the non-thermal plasma method. In this method, the microwave plasma technique is employed to generate highly active plasma in a combined H2+CO2 gas environment. The plasma treatment allows for scalable production of high-quality defective carboxyl group-endowed g-C3N4 nanosheets with mesopores. The rapid H2+CO2 plasma immersion treatment can precisely tune the electronic and band structures of g-C3N4 nanosheets within 10 min. This conjoint approach also promotes charge-carrier separation and accelerates the photocatalyst-catalyzed H2 evolution rate from 1.68 mmol h-1g-1 (raw g-C3N4) to 8.53 mmol h-1g-1 (H2+CO2-pCN) under Xenon lamp irradiation. The apparent quantum yield (AQY) of the H2+CO2-pCN with the presence of 5 wt.% Pt cocatalyst is 4.14% at 450 nm. Combined with density functional theory calculations, we illustrate that the synergistic N vacancy generation and carboxyl species grafting modifies raw g-C3N4 materials by introducing ideal defective carboxyl groups into the framework of heptazine ring g-C3N4, leading to significantly optimized electronic structure and active sites for efficient photocatalytic H2 evolution. The 5.08-times enhancement in the photocatalytic H2 evolution over the as-developed catalysts reveal the potential and maneuverability of the non-thermal plasma method in positioning carboxyl defects and mesoporous morphology. This work presents new understanding about the defect engineering mechanism in g-C3N4 semiconductors, and thus paves the way for rational design of effective polymeric photocatalysts through advanced defective functional group engineering techniques evolving CO2 as the industrial carrier gas.

Excited State Dynamics in Dual-Defects Modified Graphitic Carbon Nitride

Significant efforts are focused on defect-engineering of metal-free graphitic carbon nitride (g-C₃N₄) to amplify its efficacy. A conceptually new multidefect-modified g-C₃N₄ having simultaneously two or more defects has attracted strong attention for its enhanced photocatalytic properties. We model and compare the excited state dynamics in g-C₃N₄ with (i) nitrogen defects (N vacancy and CN group) and (ii) dual defects (N vacancy, CN group, and O doping) and show that the nonradiative recombination of charge carriers in these systems follows the Shockley-Read-Hall mechanism. The nitrogen defects create three midgap states that trap charges and act as recombination centers. The dual-defect modified systems exhibit superior properties compared with pristine g-C₃N₄ because the defects facilitate rapid charge separation and extend the spectrum of absorbed light. The system doped with O shows better performance due to enhanced carrier lifetime and higher oxidation potential caused by a downshifted valence band. The study provides guidance for rational design of stable and efficient photocatalytic materials.

The biopolymer-assisted synthesis of assembled g-C3N4 open frameworks with electron delocalization channels for prompt H2 production

Three-dimensional (3D) photocatalysts can overcome the serious aggregation exhibited by two-dimensional (2D) nanosheets caused by unavoidable van der Waals forces.

Point-Defect Engineering: Leveraging Imperfections in Graphitic Carbon Nitride (g-C3 N4 ) Photocatalysts toward Artificial Photosynthesis

Graphitic carbon nitride (g-C₃ N₄ ) is a kind of ideal metal-free photocatalysts for artificial photosynthesis. At present, pristine g-C₃ N₄ suffers from small specific surface area, poor light absorption at longer wavelengths, low charge migration rate, and a high recombination rate of photogenerated electron-hole pairs, which significantly limit its performance. Among a myriad of modification strategies, point-defect engineering, namely tunable vacancies and dopant introduction, is capable of harnessing the superb structural, textural, optical, and electronic properties of g-C₃ N₄ to acquire an ameliorated photocatalytic activity. In view of the burgeoning development in this pacey field, a timely review on the state-of-the-art advancement of point-defect engineering of g-C₃ N₄ is of vital significance to advance the solar energy conversion. Particularly, insights into the intriguing roles of point defects, the synthesis, characterizations, and the systematic control of point defects, as well as the versatile application of defective g-C₃ N₄ -based nanomaterials toward photocatalytic water splitting, carbon dioxide reduction and nitrogen fixation will be presented in detail. Lastly, this review will conclude with a balanced perspective on the technical and scientific hindrances and future prospects. Overall, it is envisioned that this review will open a new frontier to uncover novel functionalities of defective g-C₃ N₄ -based nanostructures in energy catalysis.

Engineering of graphitic carbon nitride with simultaneous potassium doping sites and nitrogen defects for notably enhanced photocatalytic oxidation performance

Graphitic carbon nitride (g-C₃N₄) offers exciting opportunities for sustainable photocatalytic oxidation of organic pollutants but suffers from drawbacks of insufficient oxidation driving force and low quantum efficiency. To over the drawbacks, here a simple and effective strategy was developed to engineer g-C₃N₄ with simultaneous interstitially embedded potassium dopant and nitrogen defects, and the process included supramolecular preorganization followed by KOH-assisted thermal polycondensation. In the prepared D_N-K-CN catalysts, potassium doping level and the amount of nitrogen defects were both controllable. With the increment of potassium doping level, the bandgap of the D_N-K-CN became narrow, along with continuously downshifted valence band position. The D_N-K-CN showed greatly enhanced visible-light photocatalytic oxidation performance with respect to g-C₃N₄ in the degradation of emerging phenolic pollutants, acetaminophen and methylparaben; meanwhile, the oxidation performance of D_N-K-CN depended on potassium doping level and the amount of nitrogen defects. Combination of experimental findings and theory calculations it is confirmed that the enhanced photocatalytic oxidation performance of D_N-K-CN was attributed to the synergistic effect of potassium dopant and nitrogen defects, which resulted in the generation of plentiful active oxygen species and the improvement of oxidation driving force of valence holes. The influence of potassium dopant and nitrogen defects on the electronic and band structures of g-C₃N₄ was revealed; simultaneously, mechanism of the enhanced photocatalytic oxidation performance of g-C₃N₄ after the introduction of potassium dopant and nitrogen defects was studied. The present work provided new insights into the electronic and band structure tuning for the improvement of the photocatalytic oxidation performance of g-C₃N₄.

Recent Advances and Challenges in Photoreforming of Biomass-Derived Feedstocks into Hydrogen, Biofuels, or Chemicals by Using Functional Carbon Nitride Photocatalysts

Photoreforming of biomass into hydrogen, biofuels, and chemicals is highly desired, yet this field of research is still in its infancy. Developing an efficient, novel, and environmentally friendly photocatalyst is key to achieving these goals. To date, the nonmetallic and eco-friendly material carbon nitride has found many uses in reactions such as water splitting, CO₂ reduction, N₂ fixation, and biorefinery, owing to its outstanding photocatalytic activity. However, a narrow light absorption range and fast charge recombination are often encountered in the pristine carbon nitride photocatalytic system, which resulted in unsatisfying photocatalytic activity. To improve the photocatalytic performance of pure carbon nitride in biomass reforming, modification is needed. In this Review, the design and preparation of functional carbon nitride, as well as its photocatalytic properties for the synthesis of hydrogen, biofuels, and chemicals through biomass reforming, are discussed alongside potential avenues for its future development.

Defect engineering in polymeric carbon nitride photocatalyst: Synthesis, properties and characterizations

Polymer carbon nitride (CN) has unique structure and electronic properties, making it attractive in photocatalysis fields. However, the photocatalytic efficiency of the pristine CN photocatalyst is still unsatisfactory. In this regard, the introduction of vacancy defects can effectively tune photoelectric properties of CN photocatalyst through tailoring the electronic structure and bandgap engineering. In this review, the effect of vacancy defects on CN is reviewed from the aspects of light absorption, charge separation and surface photoreactivity of CN. Meanwhile, the current progress in the design of vacancy defects with the classified carbon vacancies (CVs), nitrogen vacancies (NVs), amino and cyano groups on CN to boost the photocatalytic performance is summarized. Furthermore, various characterization methods have been summarized and highlighted, including microscopic characterization (SEM, TEM, AFM, HAADF-STEM), spectroscopic characterization (XRD, FTIR, XAFS, XANES, EPR, PAS, XPS, raman spectroscopy, solid-state NMR spectroscopy), elemental analysis, and computational characterization. Finally, the future opportunities and challenges of CN photocatalysts designed with vacancies and defects are proposed to highlight the development direction of this research field.

Molecular-functionalized engineering of porous carbon nitride nanosheets for wide-spectrum responsive solar fuel generation

Carbon nitride (C₃N₄) is a promising metal-free photocatalyst for solar-to-energy conversion, but bulk carbon nitride (BCN) shows insufficient light absorption, sluggish photocarrier transfer and moderate activity for photocatalysis. Herein, a facile strategy to significantly increase solar spectrum absorption of the functionalized porous carbon nitride nanosheets (MFPCN) via molecule self-assembly engineering coupled thermal polymerization is reported. This strategy can greatly enhance the wide-solar-spectrum absorption of MFPCN up to 1000 nm than most reported carbon nitride-based photocatalysts. Experimental characterizations and theoretical calculations together display that this strategy could introduce hydroxyl groups into the structure of MFPCN as well as the rich pores and active sites at the edges of framework, which can narrow the bandgap and accelerate the transfer and separation of photoinduced carries. As a result, the optimal MFPCN photocatalyst exhibit the excellent photocatalytic hydrogen evolution rate of 7.745 mmol g^-1h^-1 under simulated solar irradiation, which is ≈13 times that of BCN with remarkable durable CO₂ reduction activities. New findings in this work will provide an approach to extend solar spectrum absorption of metal-free catalysts for solar fuel cascades.

Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution

The technology of photocatalytic hydrogen production that converts abundant yet intermittent solar energy into an environmentally friendly alternative energy source is an attractive strategy to mitigate the energy crisis and environmental pollution. Graphitic carbon nitride (g-C₃N₄), as a promising photocatalyst, has gradually received focus in the field of artificial photosynthesis due to its appealing optical property, high chemical stability and easy synthesis. However, the limited light absorption and massive recombination of photoinduced carriers have hindered the photocatalytic activity of bare g-C₃N₄. Therefore, from the perspective of theoretical calculations and experiments, many valid approaches have been applied to rationally design the photocatalyst and ameliorate the hydrogen production performance, such as element doping, defect engineering, morphology tuning, and semiconductor coupling. This review summarized the latest progress of g-C₃N₄-based photocatalysts from two perspectives, modification of pristine g-C₃N₄ and interfacial engineering design. It is expected to offer feasible suggestions for the fabrication of low-cost and high-efficiency photocatalysts and the photocatalytic mechanism analyses assisted by calculation in the near future. Finally, the prospects and challenges of this exciting research field are discussed.

Enhanced sunlight driven photocatalytic activity of In2S3 nanosheets functionalized MoS2 nanoflowers heterostructures

Visible light-sensitive 2D-layered based photocatalytic systems have been proven one of the effective recent trends. We report the preparation of a 2D-layered based In₂S₃-MoS₂ nanohybrid system through a facile hydrothermal method, capable of efficiently degrading of organic contaminants with remarkable efficiency. Transmission electron microscopy (TEM) results inferred the attachment of 2D-layered In₂S₃ sheets with the MoS₂ nanoflakes. Field emission SEM studies with chemical mapping confirm the uniform distribution of Mo, In, and S atoms in the heterostructure, affirming sample uniformity. X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy results confirm the appearance of 2H-MoS₂ and β-In₂S₃ in the grown heterostructures. UV-DRS results reveal a significant improvement in the optical absorbance and significant bandgap narrowing (0.43 eV) in In₂S₃-MoS₂ nanohybrid compared to pristine In₂S₃ nanosheets in the visible region. The effective bandgap narrowing facilitates the charge transfer between MoS₂ and In₂S₃ and remarkably improves the synergistic effect. Effective bandgap engineering and improved optical absorption of In₂S₃-MoS₂ nanohybrids are favorable for enhancing their charge separation and photocatalytic ability. The photocatalytic decomposition efficiency of the pristine In₂S₃ nanosheets and In₂S₃-MoS₂ nanohybrids sample is determined by the decomposing of methylene blue and oxytetracycline molecules under natural sunlight. The optimized In₂S₃-MoS₂ nanohybrids can decompose 97.67% of MB and 76.3% of OTC-HCl molecules solution in 8 min and 40 min of exposure of sunlight respectively. 2D-layered In₂S₃-MoS₂ nanohybrids reveal the tremendous remediation performance towards chemical contaminations and pharmaceutical waste, which indicates their applicability in industrial and practical applications.

Simultaneous layer exfoliation and defect activation in g-C3N4 nanosheets with air-water interfacial plasma: spectroscopic defect probing with tailored optical properties

Defect-activated ultrathin graphitic carbon nitride nanosheets (g-C₃N₄) show an enhanced visible light absorption, better charge-separation, and facile charge transport properties. These are requisites for the designing of an active photocatalyst. Conventional methods used for layer exfoliation and defect activation require strong acids, reducing agents, or ultrasonic treatment for a sufficiently long duration. Furthermore, single-step approaches for layer exfoliation and defect incorporation have hardly been reported. Herein, we have shown atmospheric plasma enabled fabrication of g-C₃N₄ nanosheets. This approach is simple, low-cost, less time-consuming, and a green approach to exfoliate layers and activate multiple defects concurrently. The protocol involves plasma discharging at an air-water interface at 5 kV for 30-150 min. Atomic force microscopy (AFM) reveals a layer thickness of 96.27 nm in bulk g-C₃N₄. The thickness becomes 3.78 nm after 150 min of plasma treatment. The exfoliated layers emerge with nitrogen-vacancy sites and self-incorporated defects as probed by positron annihilation spectroscopy (PAS) and X-ray photoelectron spectroscopy (XPS). The defect activated layers show visible light absorption extended up to 600 nm. It is demonstrated that a non-uniform change in the band gap with the plasma treatment time results from quantum confinement in thin layers and Urbach tailing due to defects acting in opposition. Further, steady-state and time-resolved spectroscopy shows the contribution of multiple defect sites for a prolonged lifetime of photoinduced carriers. These defect-activated ultrathin nanosheets of CN serve as an active photocatalyst in the degradation of rhodamine B (RhB) under white LED illumination.

Defects and internal electric fields synergistically optimized g-C3N4-x/BiOCl/WO2.92 heterojunction for photocatalytic NO deep oxidation

In this work, g-C₃N_4-x/BiOCl/WO_2.92 heterojunction with "N-O" vacancies was prepared using NaBiO₃ and WCl₆ as raw materials and non-metal plasma of WO_2.92 grew in-situ on the surface of BiOCl, resulting in the enhanced photocatalytic NO deep oxidation. XPS tests and DFT calculation indicated the formation of internal electric fields from g-C₃N_4-x to BiOCl, BiOCl to WO_2.92, which induced the transition from Ⅱ-Ⅱ-type to double Z-scheme hetero-structure. High separation efficiency, prolong lifetime and strong redox ability of photo-generated electron-hole pairs were simultaneously achieved due to the charge capture effect of defects and double Z-scheme mechanism. Therefore, g-C₃N_4-x/BiOCl/WO_2.92 exhibited the significantly increased NO removal rates from 21.17% (BiOCl/WO_2.92) and 36.52% (g-C₃N_4-x) to 68.70% and the main oxidation product of NO was NO₃^-. This study revealed that the carrier dynamics of heterojunction photocatalysts could be optimized by the synergistic effect of defects and internal electric fields to achieve photocatalytic NO deep oxidization.

Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation

The low band gap energy and high surface area two-dimensional materials allow it to tune its basic properties using surface decoration. Here, La³⁺ are decorated on two-dimensional graphitic carbon nitride using a simple and easily scalable chemisorption process with an adsorption capacity of 657.32 mg g^-1. In the X-ray diffraction (XRD) study, the positive slope of the W-H plot elucidates the tensile strain generation (0.103) in La³⁺ ions decorated 2D-g-C₃N₄ (La³⁺-2D-g-C₃N₄). The high-resolution transmission electron microscope (HR-TEM) study and the higher I_D/I_G ratio (0.82) in the Raman spectroscopy study confirm the more defects intensification in La³⁺-2D-g-C₃N₄. The reduction in band gap energy for La³⁺-2D-g-C₃N₄ (from 2.83 eV to 2.21 eV) has shown a good correspondence with the band structures study as obtained from the DFT study. In the DFT study, the significant contributions of N atoms in charge transfer validate the N 1s findings from the X-ray photoelectron spectroscopy (XPS) study for La³⁺-2D-g-C₃N₄. La³⁺-2D-g-C₃N₄ shows the photodegradation efficiency (93%) of ciprofloxacin under UV irradiation, which is superior to pristine 2D-g-C₃N₄ (82%) as well as other g-C₃N₄ based nanocatalysts. Also, La³⁺ decoration results in enhancement (32.3%) in photodegradation kinetics rate. The degradation and kinetics studies in the presence of different scavengers ensure that the O₂- and OH^- radicals are mostly responsible for the ciprofloxacin photodegradation. The Liquid chromatographic-mass spectroscopy and the high-performance liquid chromatography studies confirm the photodegradation. The reusability of La³⁺-2D-g-C₃N₄ is tested up to the fifth cycle. FTIR and UV-visible absorption spectroscopy confirm the stability of the used photocatalyst.

Panchromatic Ternary Polymer Dots Involving Sub-Picosecond Energy and Charge Transfer for Efficient and Stable Photocatalytic Hydrogen Evolution

Panchromatic ternary polymer dots (Pdots) consisting of two conjugated polymers (PFBT and PFODTBT) based on fluorene and benzothiadiazole groups, and one small molecular acceptor (ITIC) have been prepared and assessed for photocatalytic hydrogen production with the assistance of a Pt cocatalyst. Femtosecond transient absorption spectroscopic studies of the ternary Pdots have revealed both energy and charge transfer processes that occur on the time scale of sub-picosecond between the different components. They result in photogenerated electrons being located mainly at ITIC, which acts as both electron and energy acceptor. Results from cryo-transmission electron microscopy suggest that ITIC forms crystalline phases in the ternary Pdots, facilitating electron transfer from ITIC to the Pt cocatalyst and promoting the final photocatalytic reaction yield. Enhanced light absorption, efficient charge separation, and the ideal morphology of the ternary Pdots have rendered an external quantum efficiency up to 7% at 600 nm. Moreover, the system has shown a high stability over 120 h without obvious degradation of the photocatalysts.

A facile synthesis of Zn-doped TiO2 nanoparticles with highly exposed (001) facets for enhanced photocatalytic performance

It is a great challenge to simultaneously improve the visible light absorption capacity and enhance photon-generated carrier separation efficiency of photocatalysts. Herein, Zn-doped TiO2 nanoparticles with high exposure of the (001) crystal face were prepared via a one-step hydrothermal decomposition method. A detailed analysis reveals that the electronic structures were modulated by Zn doping; thus, the responsive wavelength was extended to 600 nm, which effectively improved the visible light absorption of TiO2. More importantly, the surface heterojunction of TiO2 was created because of the co-existing specific facets of (101) and (001). Therefore, the surface separation efficiency of photogenerated electron and hole pairs was greatly enhanced. So, the optimal TiO2 photocatalyst exhibited excellent photocatalytic activity, in which the Rhodamine B (RhB) degradation efficiency was 98.7% in 60 min, under the irradiation of visible light. This study is expected to provide guidance for the rational design of TiO2 photocatalysts.

Electrostatic interaction mechanism of visible light absorption broadening in ion-doped graphitic carbon nitride

H₂O₂ treated K-doped graphitic carbon nitride presents an enhanced visible light absorption, which is due to the electrostatic attraction between K ions and OOH ions inside graphitic carbon nitride.

Surface defect engineering and morphology control of graphitic carbon nitride with synergistically improved photocatalytic performance

g-C₃N₄ based on defects and ultrathin nanosheets (CNDNS) has been constructed through in situ vapor treatment. CNDNS exhibits a high degradation activity.

Construction of molecularly doped and cyano defects co-modified graphitic carbon nitride for the efficient photocatalytic degradation of tetracycline hydrochloride

The broadening of the π-conjugation system and the introduction of cyano defects together contribute to the increase in photocatalytic activity.

Phenyl-Bridged Graphitic Carbon Nitride with a Porous and Hollow Sphere Structure to Enhance Dissociation of Photogenerated Charge Carriers and Visible-Light-Driven H2 Generation

Graphitic carbon nitride (CN) suffers from rapid recombination of photoexcited charges due to the existing highly symmetrical tri-s-triazine ring and long charge diffusion path, resulting in moderate photocatalytic activity. The bridged phenyl embedded in the CN structure was used to reduce the symmetry of the tri-s-triazine ring. In addition, the CN material was constructed with a porous and hollow sphere structure to shorten the diffusion path of charge carriers. Herein, simple thermal polymerization of a trimesic acid-doped melamine-cyanuric acid (MCA) supramolecular was employed to construct phenyl-bridged graphitic carbon nitride (Ph-CN-MCA) with a hollow sphere structure composed of porous nanosheets for visible-light catalytic H₂ evolution. The porous and hollow sphere-structured Ph-CN-MCA possessed increased degree of polymerization, more negative conduction band potential, enlarged Brunauer-Emmett-Teller (BET) surface area, and shortened charge diffusion path. In addition, bridged phenyl embedded in the Ph-CN-MCA structure not only accelerated the dissociation of photogenerated carriers but also narrowed the band gap and extended the visible-light absorption. Further, the separated highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of Ph-CN-MCA facilitated the spatial dissociation of photogenerated charges, which was also confirmed by theoretical calculations. As a consequence, compared with the reference CN-MA catalyst prepared from melamine, Ph-CN-MCA showed approximately 48.42 times the photocatalytic H₂ evolution under visible-light irradiation. The developed synthetic method herein highlights that phenyl-bridged graphitic carbon nitride with a porous and hollow sphere structure could provide an efficient platform to boost the dissociation of photoexcited charge carriers and photocatalytic H₂ evolution.

A Nitrogen-Rich Covalent Triazine Framework as a Photocatalyst for Hydrogen Production

Covalent triazine frameworks (CTFs) have emerged as new candidate materials in various research areas such as catalysis, gas separation storage, and energy-related organic devices due to their easy functionalization, high thermal and chemical stability, and permanent porosity. Herein, we report the successful synthesis of a CTF rich in cyano groups (CTF-CN) by the solvothermal condensation of 2,3,6,7-tetrabromonapthalene (TBNDA), Na2(1,1-dicyanoethene-2,2-dithiolate), and 1,3,5-tris-(4-aminophenyl)-triazine (TAPT) at 120°C. XRD, SEM, and TEM characterization studies revealed CTF-CN to be amorphous and composed of ultrathin 2D sheets. CTF-CN possessed strong absorption at visible wavelengths, with UV-vis measurements suggesting a band gap energy in the range 2.7-2.9 eV. A 5 wt.% Pt/CTF-CN was found to be a promising photocatalyst for hydrogen production, affording a rate of 487.6 μmol g-1 h-1 in a H2O/TEOA/CH3OH solution under visible light. The photocatalytic activity of CTF-CN was benchmarked against g-C3N4 for meaningful assessment of performance. Importantly, the 5 wt.% Pt/CTF-CN photocatalyst exhibited excellent thermal and photocatalytic stability. Further, as a nitrogen-rich porous 2D material, CTF-CN represents a potential platform for the development of novel electrode material for fuel cells and metal ion batteries.