Fabrication and Evaluation of 3D Printed Poly(l-lactide) Scaffold Functionalized with Quercetin-Polydopamine for Bone Tissue Engineering

Design of chemobrionic and biochemobrionic scaffolds for bone tissue engineering

Chemobrionic systems have attracted great attention in material science for development of novel biomimetic materials. This study aims to design a new bioactive material by integrating biosilica into chemobrionic structure, which will be called biochemobrionic, and to comparatively investigate the use of both chemobrionic and biochemobrionic materials as bone scaffolds. Biosilica, isolated from Amphora sp. diatom, was integrated into chemobrionic structure, and a comprehensive set of analysis was conducted to evaluate their morphological, chemical, mechanical, thermal, and biodegradation properties. Then, the effects of both scaffolds on cell biocompatibility and osteogenic differentiation capacity were assessed. Cells attached to the scaffolds, spread out, and covered the entire surface, indicating the absence of cytotoxicity. Biochemobrionic scaffold exhibited a higher level of mineralization and bone formation than the chemobrionic structure due to the osteogenic activity of biosilica. These results present a comprehensive and pioneering understanding of the potential of (bio)chemobrionics for bone regeneration.

The Combination of Bioactive Herbal Compounds with Biomaterials for Regenerative Medicine

Regenerative medicine aims to restore the function of diseased or damaged tissues and organs by cell therapy, gene therapy, and tissue engineering, along with the adjunctive application of bioactive molecules. Traditional bioactive molecules, such as growth factors and cytokines, have shown great potential in the regulation of cellular and tissue behavior, but have the disadvantages of limited source, high cost, short half-life, and side effects. In recent years, herbal compounds extracted from natural plants/herbs have gained increasing attention. This is not only because herbal compounds are easily obtained, inexpensive, mostly safe, and reliable, but also owing to their excellent effects, including anti-inflammatory, antibacterial, antioxidative, proangiogenic behavior and ability to promote stem cell differentiation. Such effects also play important roles in the processes related to tissue regeneration. Furthermore, the moieties of the herbal compounds can form physical or chemical bonds with the scaffolds, which contributes to improved mechanical strength and stability of the scaffolds. Thus, the incorporation of herbal compounds as bioactive molecules in biomaterials is a promising direction for future regenerative medicine applications. Herein, an overview on the use of bioactive herbal compounds combined with different biomaterial scaffolds for regenerative medicine application is presented. We first introduce the classification, structures, and properties of different herbal bioactive components and then provide a comprehensive survey on the use of bioactive herbal compounds to engineer scaffolds for tissue repair/regeneration of skin, cartilage, bone, neural, and heart tissues. Finally, we highlight the challenges and prospects for the future development of herbal scaffolds toward clinical translation. Overall, it is believed that the combination of bioactive herbal compounds with biomaterials could be a promising perspective for the next generation of regenerative medicine.

Shape Memory Polyester Scaffold Promotes Bone Defect Repair through Enhanced Osteogenic Ability and Mechanical Stability

Bone tissue engineering involving scaffolds is recognized as the ideal approach for bone defect repair. However, scaffold materials exhibit several limitations, such as low bioactivity, less osseointegration, and poor processability, for developing bone tissue engineering. Herein, a bioactive and shape memory bone scaffold was fabricated using the biodegradable polyester copolymer's four-dimensional fused deposition modeling. The poly(ε-caprolactone) segment with a transition temperature near body temperature was selected as the molecular switch to realize the shape memory effect. Another copolymer segment, i.e., poly(propylene fumarate), was introduced for post-cross-linking and improving the regulation effect of the resulting bioadaptable scaffold on osteogenesis. To mimic the porous structures and mechanical properties of the native spongy bone, the pore size of the printed scaffold was set as ∼300 μm, and a comparable compression modulus was achieved after photo-cross-linking. Compared with the pristine poly(ε-caprolactone), the scaffold made from fumarate-functionalized copolymer considerably enhanced the adhesion and osteogenic differentiation of MC3T3-E1 cells in vitro. In vivo experiments indicated that the bioactive shape memory scaffold could quickly adapt to the defect geometry during implantation via shape change, and bone regeneration at the defect site was remarkably promoted, providing a promising strategy to treat bone defects in the clinic, substantial bone defects with irregular geometry.

Recent Advances in the Production of Pharmaceuticals Using Selective Laser Sintering

Selective laser sintering (SLS) is an additive manufacturing process that has shown promise in the production of medical devices, including hip cups, knee trays, dental crowns, and hearing aids. SLS-based 3D-printed dosage forms have the potential to revolutionise the production of personalised drugs. The ability to manipulate the porosity of printed materials is a particularly exciting aspect of SLS. Porous tablet formulations produced by SLS can disintegrate orally within seconds, which is challenging to achieve with traditional methods. SLS also enables the creation of amorphous solid dispersions in a single step, rather than the multi-step process required with conventional methods. This review provides an overview of 3D printing, describes the operating mechanism and necessary materials for SLS, and highlights recent advances in SLS for biomedical and pharmaceutical applications. Furthermore, an in-depth comparison and contrast of various 3D printing technologies for their effectiveness in tissue engineering applications is also presented in this review.

Quercetin@Gd3+ doped Prussian blue nanocubes induce the pyroptotic death of MDA-MB-231 cells: combinational targeted multimodal therapy, dual modal MRI, intuitive modelling of r1-r2 relaxivities

Quercetin (Qu), a potential bioflavonoid has gained considerable interest as a promising chemotherapeutic drug which can inhibit the proliferation of triple-negative breast cancer (TNBC) cells due to its regulation of the expression of tumor-suppressor gene metastasis and antioxidant property. Notably, Qu exhibits a very negligible cytotoxic effect on normal cells, even with high-dose treatment, while it is shows high affinity to TNBC. However, the efficiency of Qu is limited clinically due to its poor bioavailability, caused by its low aqueous solubility (2.15 μg mL^-1 at 25 °C), rapid gastrointestinal digestion and chemical instability in alkaline and neutral media. Herein, polydopamine (PDA)-coated, NH₂-PEG-NH₂ and hyaluronic acid (HA)-functionalized Gd³⁺-doped Prussian blue nanocubes (GPBNC) are reported as a multifunctional platform for the codelivery of Qu as a chemotherapeutic agent and GPBNC as a photodynamic (PDT) and photothermal (PTT) agent with improved therapeutic efficiency to overcome theses barriers. PDA, NH₂-PEG-NH₂ and HA stabilize GPBNC@Qu and facilitate bioavailability and active-targeting, while absorption of near infrared (NIR) (808 nm; 1 W cm^-2) induces PDT and PTT activities and dual T₁-T₂-weighted magnetic resonance imaging (MRI) with high relaxometric parameters (r₁ 10.06 mM^-1 s^-1 and r₂ 24.96 mM^-1 s^-1 at a magnetic field of 3 T). The designed platform shows a pH-responsive Qu release profile and NIR-induced therapeutic efficiency of ∼79% in 20 minutes of irradiation, wherein N-terminal gardermin D (N-GSDMD) and a P2X7-receptor-mediated pyroptosis pathway induces cell death, corroborating the up-regulation of NLRP3, caspase-1, caspase-5, N-GSDMD, IL-1β, cleaved Pannexin-1 and P2X7 proteins. More interestingly, the increasing relaxivity values of Prussian blue nanocubes with Gd³⁺ doping have been explained on the basis of Solomon-Bloembergen-Morgan theory, considering inner- and outer-sphere relaxivity, wherein crystal defects, coordinated water molecules, tumbling rate, metal to water proton distance, correlation time, magnetisation value etc. play a significant role. In summary, our study suggests that GPBNC could be a beneficial nanocarrier for theranostic purposes against TNBC, while our conceptual study clearly demonstrates the role of various factors in increasing relaxometric parameters.

Composite microgranular scaffolds with surface modifications for improved initial osteoblastic cell proliferation

Polyester-based granular scaffolds are a potent material for tissue engineering due to their porosity, controllable pore size, and potential to be molded into various shapes. Additionally, they can be produced as composite materials, e.g., mixed with osteoconductive β-tricalcium phosphate or hydroxyapatite. Such polymer-based composite materials often happen to be hydrophobic, which disrupts cell attachment and decreases cell growth on the scaffold, undermining its primary function. In this work, we propose the experimental comparison of three modification techniques for granular scaffolds to increase their hydrophilicity and cell attachment. Those techniques include atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating. Composite polymer/β-tricalcium phosphate granules have been produced in a solution-induced phase separation (SIPS) process using commercially available biomedical polymers: poly(lactic acid), poly(lactic-co-glycolic acid), and polycaprolactone. We used thermal assembly to prepare cylindrical scaffolds from composite microgranules. Atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating showed similar effects on polymer composites' hydrophilic and bioactive properties. All modifications significantly increased human osteosarcoma MG-63 cell adhesion and proliferation in vitro compared to cells cultured on unmodified materials. In the case of polycaprolactone/β-tricalcium phosphate scaffolds, modifications were the most necessary, as unmodified polycaprolactone-based material disrupted the cell attachment. Modified polylactide/β-tricalcium phosphate scaffold supported excellent cell growth and showed ultimate compressive strength exceeding this of human trabecular bone. This suggests that all investigated modification techniques can be used interchangeably for increasing wettability and cell attachment properties of various scaffolds for medical applications, especially those with high surface and volumetric porosity, like granular scaffolds.

Polymeric and Composite Carriers of Protein and Non-Protein Biomolecules for Application in Bone Tissue Engineering

Conventional intake of drugs and active substances is most often based on oral intake of an appropriate dose to achieve the desired effect in the affected area or source of pain. In this case, controlling their distribution in the body is difficult, as the substance also reaches other tissues. This phenomenon results in the occurrence of side effects and the need to increase the concentration of the therapeutic substance to ensure it has the desired effect. The scientific field of tissue engineering proposes a solution to this problem, which creates the possibility of designing intelligent systems for delivering active substances precisely to the site of disease conversion. The following review discusses significant current research strategies as well as examples of polymeric and composite carriers for protein and non-protein biomolecules designed for bone tissue regeneration.

Polymeric Systems for the Controlled Release of Flavonoids

Flavonoids are natural compounds that are attracting great interest in the biomedical field thanks to the wide spectrum of their biological properties. Their employment as anticancer, anti-inflammatory, and antidiabetic drugs, as well as for many other pharmacological applications, is extensively investigated. One of the most successful ways to increase their therapeutic efficacy is to encapsulate them into a polymeric matrix in order to control their concentration in the physiological fluids for a prolonged time. The aim of this article is to provide an updated overview of scientific literature on the polymeric systems developed so far for the controlled release of flavonoids. The different classes of flavonoids are described together with the polymers most commonly employed for drug delivery applications. Representative drug delivery systems are discussed, highlighting the most common techniques for their preparation. The flavonoids investigated for polymer system encapsulation are then presented with their main source of extraction and biological properties. Relevant literature on their employment in this context is reviewed in relationship to the targeted pharmacological and biomedical applications.

A hydrogel-fiber-hydrogel composite scaffold based on silk fibroin with the dual-delivery of oxygen and quercetin

Supplying sufficient oxygen within the scaffolds is one of the essential hindrances in tissue engineering that can be resolved by oxygen-generating biomaterials (OGBs). Two main issues related to OGBs are controlling oxygenation and reactive oxygen species (ROS). To address these concerns, we developed a composite scaffold entailing three layers (hydrogel-electrospun fibers-hydrogel) with antioxidant and antibacterial properties. The fibers, the middle layer, reinforced the composite structure, enhancing the mechanical strength from 4.27 ± 0.15 to 8.27 ± 0.25 kPa; also, this layer is made of calcium peroxide and silk fibroin (SF) through electrospinning, which enables oxygen delivery. The first and third layers are physical SF hydrogels to control oxygen release, containing quercetin (Q), a nonenzymatic antioxidant. This composite scaffold resulted in almost more than 40 mmHg of oxygen release for at least 13 days, and compared with similar studies is in a high range. Here, Q was used for the first time for an OGB to scavenge the possible ROS. Q delivery not only led to antioxidant activity but also stabilized oxygen release and enhanced cell viability. Based on the given results, this composite scaffold can be introduced as a safe and controllable oxygen supplier, which is promising for tissue engineering applications, particularly for bone.

Scaffold Fabrication Techniques of Biomaterials for Bone Tissue Engineering: A Critical Review

Bone tissue engineering (BTE) is a promising alternative to repair bone defects using biomaterial scaffolds, cells, and growth factors to attain satisfactory outcomes. This review targets the fabrication of bone scaffolds, such as the conventional and electrohydrodynamic techniques, for the treatment of bone defects as an alternative to autograft, allograft, and xenograft sources. Additionally, the modern approaches to fabricating bone constructs by additive manufacturing, injection molding, microsphere-based sintering, and 4D printing techniques, providing a favorable environment for bone regeneration, function, and viability, are thoroughly discussed. The polymers used, fabrication methods, advantages, and limitations in bone tissue engineering application are also emphasized. This review also provides a future outlook regarding the potential of BTE as well as its possibilities in clinical trials.

Traditional Chinese medicine promotes bone regeneration in bone tissue engineering

Bone tissue engineering (BTE) is a promising method for the repair of difficult-to-heal bone tissue damage by providing three-dimensional structures for cell attachment, proliferation, and differentiation. Traditional Chinese medicine (TCM) has been introduced as an effective global medical program by the World Health Organization, comprising intricate components, and promoting bone regeneration by regulating multiple mechanisms and targets. This study outlines the potential therapeutic capabilities of TCM combined with BTE in bone regeneration. The effective active components promoting bone regeneration can be generally divided into flavonoids, alkaloids, glycosides, terpenoids, and polyphenols, among others. The chemical structures of the monomers, their sources, efficacy, and mechanisms are described. We summarize the use of compounds and medicinal parts of TCM to stimulate bone regeneration. Finally, the limitations and prospects of applying TCM in BTE are introduced, providing a direction for further development of novel and potential TCM.

A 3D-printed scaffold-based osteosarcoma model allows to investigate tumor phenotypes and pathogenesis in an in vitro bone-mimicking niche

•

Similar mechanical and structural properties as cortical bones.

•

Recapitulating osteosarcoma phenotypes in morphology, proliferation, cytoskeleton re-organization and energy expenditure.

•

A remarkable potential of ECM remodeling.

•

The transcriptomic analysis to uncover distinct signaling pathways and molecules.

•

Similar expression patterns of biomarkers as clinical trials.

Engineering 3D Printed Scaffolds with Tunable Hydroxyapatite

Orthopedic and craniofacial surgical procedures require the reconstruction of bone defects caused by trauma, diseases, and tumor resection. Successful bone restoration entails the development and use of bone grafts with structural, functional, and biological features similar to native tissues. Herein, we developed three-dimensional (3D) printed fine-tuned hydroxyapatite (HA) biomimetic bone structures, which can be applied as grafts, by using calcium phosphate cement (CPC) bioink, which is composed of tetracalcium phosphate (TTCP), dicalcium phosphate anhydrous (DCPA), and a liquid [Polyvinyl butyral (PVB) dissolved in ethanol (EtOH)]. The ink was ejected through a high-resolution syringe nozzle (210 µm) at room temperature into three different concentrations (0.01, 0.1, and 0.5) mol/L of the aqueous sodium phosphate dibasic (Na₂HPO₄) bath that serves as a hardening accelerator for HA formation. Raman spectrometer, X-ray diffraction (XRD), and scanning electron microscopy (SEM) demonstrated the real-time HA formation in (0.01, 0.1, and 0.5) mol/L Na₂HPO₄ baths. Under those conditions_, HA was formed at different amounts, which tuned the scaffolds’ mechanical properties, porosity, and osteoclast activity. Overall, this method may pave the way to engineer 3D bone scaffolds with controlled HA composition and pre-defined properties, which will enhance graft-host integration in various anatomic locations.

Traditional Chinese Medicine Compound-Loaded Materials in Bone Regeneration

Bone is a dynamic organ that has the ability to repair minor injuries via regeneration. However, large bone defects with limited regeneration are debilitating conditions in patients and cause a substantial clinical burden. Bone tissue engineering (BTE) is an alternative method that mainly involves three factors: scaffolds, biologically active factors, and cells with osteogenic potential. However, active factors such as bone morphogenetic protein-2 (BMP-2) are costly and show an unstable release. Previous studies have shown that compounds of traditional Chinese medicines (TCMs) can effectively promote regeneration of bone defects when administered locally and systemically. However, due to the low bioavailability of these compounds, many recent studies have combined TCM compounds with materials to enhance drug bioavailability and bone regeneration. Hence, the article comprehensively reviewed the local application of TCM compounds to the materials in the bone regeneration in vitro and in vivo. The compounds included icariin, naringin, quercetin, curcumin, berberine, resveratrol, ginsenosides, and salvianolic acids. These findings will contribute to the potential use of TCM compound-loaded materials in BTE.

Re-appraising the role of flavonols, flavones and flavonones on osteoblasts and osteoclasts- A review on its molecular mode of action

Bone disorders have become a global concern illustrated with decreased bone mineral density and disruption in microarchitecture of natural bone tissue organization. Natural compounds that promote bone health by augmenting osteoblast functions and suppressing osteoclast functions has gained much attention and offer greater therapeutic value compared to conventional therapies. Amongst several plant-based molecules, flavonoids act as a major combatant in promoting bone health through their multi-faceted biological activities such as antioxidant, anti-inflammatory, and osteogenic properties. They protect bone loss by regulating the signalling cascades involved in osteoblast and osteoclast functions. Flavonoids augment osteoblastogenesis and inhibits osteoclastogenesis through their modulation of various signalling pathways. This review discusses the role of various flavonoids and their molecular mechanisms involved in maintaining bone health by regulating osteoblast and osteoclast functions.

Transcrystalline growth of PLLA on carbon fiber grafted with nano-SiO2 towards boosting interfacial bonding in bone scaffold

BACKGROUND

The reinforcement effect of fiber-reinforced polymer composites is usually limited because of the poor interfacial interaction between fiber and polymer, though fiber reinforcement is regarded as an effective method to enhance the mechanical properties of polymer.

METHODS

In this study, nano-SiO2 particles grafted by 3-Glycidoxypropyltrimethoxysilane (KH560) were introduced onto the surface of 3-Aminopropyltriethoxysilane (KH550) modified carbon fiber (CF) by a self-assembly strategy to improve the interfacial bonding between CF and biopolymer poly (lactic acid) (PLLA).

RESULTS

The results indicated that PLLA chains preferred to anchor at the surface of nano-SiO2 particles and then formed high order crystalline structures. Subsequently, PLLA spherulites could epitaxially grow on the surface of functionalized CF, forming a transcrystalline structure at the CF/PLLA interface. Meanwhile, the nano-SiO2 particles were fixed in the transcrystalline structure, which induced a stronger mechanical locking effect between CF and PLLA matrix. The results of tensile experiments indicated that the PLLA/CF-SiO2 scaffold with a ratio of CF to SiO2 of 9:3 possessed the optimal strength and modulus of 10.11 MPa and 1.18 GPa, respectively. In addition, in vitro tests including cell adhesion and fluorescence indicated that the scaffold had no toxicity and could provide a suitable microenvironment for the growth and proliferation of cell.

CONCLUSION

In short, the PLLA/CF-SiO2 scaffold with good mechanical properties and cytocompatibility had great potential in the application of bone tissue engineering.

Biomineralized Composite Liquid Crystal Fiber Scaffold Promotes Bone Regeneration by Enhancement of Osteogenesis and Angiogenesis

Liquid crystals (LCs) are appealing biomaterials for applications in bone regenerative medicine due to their tunable physical properties and anisotropic viscoelastic behavior. This study reports a novel composite poly (L-lactide) (PLLA) scaffold that is manufactured by a simple electrospinning and biomineralization technique that precisely controls the fibrous structure in liquid LC phase. The enriched-LC composites have superior mineralization ability than neat PLLA; furthermore BMSC cells were inoculated onto the HAP-PLLA/LC with hydroxyapatite (HAP) composite scaffold to test the capability for osteogenesis in vitro. The results show that the PLLA/LC with HAP produced by mineralization leads to better cell compatibility, which is beneficial to cell proliferation, osteogenic differentiation, and expression of the angiogenic CD31 gene. Moreover, in vivo studies showed that the HAP-PLLA/LC scaffold with a bone-like environment significantly accelerates new and mature lamellar bone formation by development of a microenvironment for vascularized bone regeneration. Thus, this bionic composite scaffold in an LC state combining osteogenesis with vascularized activities is a promising biomaterial for bone regeneration in defective areas.

Concomitant Effect of Quercetin- and Magnesium-Doped Calcium Silicate on the Osteogenic and Antibacterial Activity of Scaffolds for Bone Regeneration

Quercetin is a bioflavonoid which has a broad spectrum of biological activity. Due to its lower chemical stability, it is usually encapsulated, or a metal–quercetin complex is formed to enhance its biological activity at a lower concentration. Here, our novel approach was to form a quercetin complex to magnesium-doped calcium silicate (CMS) ceramics through a coprecipitation technique so as to take advantage of quercetin’s antibacterial activity within the antibacterial and osteogenic potential of the silicate. Due to quercetin’s inherent metal-chelating ability, (Ca+Mg)/Si increased with quercetin concentration. Quercetin in magnesium-doped calcium silicate ceramic showed concentration-dependent pro-oxidant and antioxidant activity in SaOS-2 with respect to quercetin concentration. By optimizing the relative concentration, we were able to achieve 3-fold higher proliferation and 1.6-fold higher total collagen at day 14, and a 1.7-fold higher alkaline phosphatase production at day 7 with respect to polycaprolactone/polyvinylpyrrolidone (PCL/PVP) scaffold. Quercetin is effective against Gram-positive bacteria such as S. aureus. Quercetin is coupled with CMS provided similar effect with lower quercetin concentration than quercetin alone. Quercetin reduced bacterial adhesion, proliferation and biofilm formation. Therefore, quercetin-coupled magnesium-doped calcium silicate not only enhanced osteogenic potential, but also reduced bacterial adhesion and proliferation.

Fabrication of Biomedical Scaffolds Using Biodegradable Polymers

Degradable polymers are used widely in tissue engineering and regenerative medicine. Maturing capabilities in additive manufacturing coupled with advances in orthogonal chemical functionalization methodologies have enabled a rapid evolution of defect-specific form factors and strategies for designing and creating bioactive scaffolds. However, these defect-specific scaffolds, especially when utilizing degradable polymers as the base material, present processing challenges that are distinct and unique from other classes of materials. The goal of this review is to provide a guide for the fabrication of biodegradable polymer-based scaffolds that includes the complete pathway starting from selecting materials, choosing the correct fabrication method, and considering the requirements for tissue specific applications of the scaffold.

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

Porous biodegradable scaffolds provide a physical substrate for cells allowing them to attach, proliferate and guide the formation of new tissues. A variety of techniques have been developed to fabricate tissue engineering (TE) scaffolds, among them the most relevant is the thermally-induced phase separation (TIPS). This technique has been widely used in recent years to fabricate three-dimensional (3D) TE scaffolds. Low production cost, simple experimental procedure and easy processability together with the capability to produce highly porous scaffolds with controllable architecture justify the popularity of TIPS. This paper provides a general overview of the TIPS methodology applied for the preparation of 3D porous TE scaffolds. The recent advances in the fabrication of porous scaffolds through this technique, in terms of technology and material selection, have been reviewed. In addition, how properties can be effectively modified to serve as ideal substrates for specific target cells has been specifically addressed. Additionally, examples are offered with respect to changes of TIPS procedure parameters, the combination of TIPS with other techniques and innovations in polymer or filler selection.

Biomimetic Hydrogels Loaded with Nanofibers Mediate Sustained Release of pDNA and Promote In Situ Bone Regeneration

Polymer hydrogels are generally insufficient biomechanics, strong resistance to cell adhesion, and weak bioactivity which limits their application in bone tissue engineering considerably. In order to develop a bone tissue engineering material with both good mechanical properties, osteogenic and angiogenic activity. Nanofibers carrying DNA plasmid (pNF) are introduced to gelatin methacryloyl (GelMA) and thiolated chitosan (TCS) system for preparing a novel GelMA/TCS/pNF composite hydrogel with dual network structure. By characterization of the compressive measurements, the resulting composite scaffold shows greatly enhanced mechanical strength (0.53 MPa) and is not damaged after 20 cycles of compression. And the fabricated composite scaffold displays sustained release of bone morphogenetic protein-2 that can induce osteogenic differentiation and angiopoietin-1 that promotes vascularization. The cell experiment shows that this system can significantly promote MC3T3-E1 cell attachment, proliferation, as well as osteogenic-related and angiogenic-related genes expression of MC3T3-E1 cells. Moreover, the in vivo results show that the composite scaffold with activated gene fibers can significantly promote osteogenesis and vascularization leading to favorable capacity of bone regeneration, meaning that the resulting biomimetic composite hydrogel scaffolds are excellent candidates for bone repair materials.

A novel magnesium ion-incorporating dual-crosslinked hydrogel to improve bone scaffold-mediated osteogenesis and angiogenesis

Osteogenesis is closely complemented by angiogenesis during the bone regeneration process. The development of functional hydrogel bone substitutes that mimic the extracellular matrix is a promising strategy for bone tissue engineering. However, the development of scaffold materials tailored to exhibit sufficient biomechanics, biodegradability, and favorable osteogenic and angiogenic activity continue to present a great challenge. Herein, we prepared a novel magnesium ion-incorporating dual-crosslinked hydrogel through the photocrosslinking of gelatin methacryloyl (GelMA), thiolated chitosan (TCS) and modified polyhedral oligomeric silsesquioxane (POSS) nanoparticles, and active Mg²⁺ ions were then introduced into system via coordination bonds of MgS, which can be tailored to possess superior mechanical strength, a stable network structure and more suitable pore size and degradation properties. The fabricated GelMA/TCS/POSS-Mg hydrogels effectively promoted cell adhesion, spreading, and proliferation, demonstrating that the introduction of POSS and Mg²⁺ not only stimulates the osteogenic differentiation of BMSCs but also promotes angiogenesis both in vitro and in vivo, thereby facilitating subsequent bone regeneration in calvarial defects of rats. Taken together, the results of this study indicate that the GelMA/TCS/POSS-Mg hydrogel has promising potential for repairing bone defects by promoting cell adhesion, osteogenesis and vascularization.

Melanin and Melanin-Like Hybrid Materials in Regenerative Medicine

Melanins are a group of dark insoluble pigments found widespread in nature. In mammals, the brown-black eumelanins and the reddish-yellow pheomelanins are the main determinants of skin, hair, and eye pigmentation and play a significant role in photoprotection as well as in many biological functions ensuring homeostasis. Due to their broad-spectrum light absorption, radical scavenging, electric conductivity, and paramagnetic behavior, eumelanins are widely studied in the biomedical field. The continuing advancements in the development of biomimetic design strategies offer novel opportunities toward specifically engineered multifunctional biomaterials for regenerative medicine. Melanin and melanin-like coatings have been shown to increase cell attachment and proliferation on different substrates and to promote and ameliorate skin, bone, and nerve defect healing in several in vivo models. Herein, the state of the art and future perspectives of melanins as promising bioinspired platforms for natural regeneration processes are highlighted and discussed.

3D printing of bone tissue engineering scaffolds

Tissue engineering is promising in realizing successful treatments of human body tissue loss that current methods cannot treat well or achieve satisfactory clinical outcomes. In scaffold-based bone tissue engineering, a high performance scaffold underpins the success of a bone tissue engineering strategy and a major direction in the field is to produce bone tissue engineering scaffolds with desirable shape, structural, physical, chemical and biological features for enhanced biological performance and for regenerating complex bone tissues. Three-dimensional (3D) printing can produce customized scaffolds that are highly desirable for bone tissue engineering. The enormous interest in 3D printing and 3D printed objects by the science, engineering and medical communities has led to various developments of the 3D printing technology and wide investigations of 3D printed products in many industries, including biomedical engineering, over the past decade. It is now possible to create novel bone tissue engineering scaffolds with customized shape, architecture, favorable macro-micro structure, wettability, mechanical strength and cellular responses. This article provides a concise review of recent advances in the R & D of 3D printing of bone tissue engineering scaffolds. It also presents our philosophy and research in the designing and fabrication of bone tissue engineering scaffolds through 3D printing.

A novel bio-inspired conductive, biocompatible, and adhesive terpolymer based on polyaniline, polydopamine, and polylactide as scaffolding biomaterial for tissue engineering application

A novel electrically conductive nanofibrous scaffold based on polyaniline-co-(polydopamine-grafted-poly(d,l-lactide)) [PANI-co-(PDA-g-PLA)] was fabricated using electrospinning technique and its physicochemical as well as biological characteristics toward bone tissue engineering (TE) were investigated extensively. In detail, PANI-co-PDA was synthesized via a one-step chemical oxidization approach. Then, d,l-lactaide monomer was grafted onto PDA segment using a ring opening polymerization (ROP) to afford PANI-co-(PDA-g-PLA) terpolymer. The successful synthesis of PANI-co-(PDA-g-PLA) terpolymer was confirmed using FTIR spectroscopy as well as TGA analysis. Finally, a solution of the synthesized terpolymer was electrospun to fabricate a conductive nanofibrous scaffold. Some physicochemical features such as mechanical, conductivity, electroactivity, hydrophobicity, and morphology as well as biological characteristics including biocompatibility, biodegradability, as well as enhancing the cells adhesion and proliferation were investigated. According to the above-mentioned experimental results, the fabricated electrospun nanofibers can be considered as a potential scaffold for TE application, mainly due to its proper physicochemical and biological properties.