Visible-Light-Responsive Anthraquinone Functionalized Covalent Organic Frameworks for Metal-Free Selective Oxidation of Sulfides: Effects of Morphology and Structure

High-efficiency oxygen evolution on γ-Fe2O3 catalysts with BiVO4 photoabsorbers and TpAQ hole transport layers for photoelectrochemical water splitting

The interfacial energy levels between oxygen-excavating co-catalysts (OECs) and BiVO4 often lead to carrier recombination. Modulating the interface using a hole transport layer (HTL) can effectively inhibit interfacial recombination, realizing efficient photoelectrochemical (PEC) water splitting. Herein, we design BiVO4@γ-Fe2O3/TpAQ photoanodes by one-step solvothermal insertion of TpAQ COF between BiVO4 and γ-Fe2O3 co-catalysts as HTL layer. The positive transient surface photovoltage signals indicate that the introduction of TpAQ COF provides an additional driving force for photogenerated hole transfer, which effectively improves the carrier transfer efficiency of BiVO4. Meanwhile, the fastest transfer rate of BiVO4@γ-Fe2O3/TpAQ in the intensity-modulated photocurrent spectroscopy (IMPS) test confirms the excellent charge transfer kinetics of TpAQ COF HTL. In addition, a combination of photoluminescence and energy band calculations showed that a type II heterojunction was constructed between the TpAQ COF and BiVO4, thus avoiding photogenerated electron-hole pair recombination. BiVO4@γ-Fe2O3/TpAQ exhibited the highest PEC water oxidation capability, achieving a photocurrent density of 6.3 mA cm-2 at 1.23 VRHE under the optimized photoanode. Attributed to the TpAQ COF HTL, the BiVO4@γ-Fe2O3/TpAQ photoanode exhibits excellent incident monochromatic photon-electron conversion efficiencies (up to 95.23% at 420 nm) and charge injection efficiencies (up to 94.6% at 1.23 VRHE).

Enhancing the crystallinity of covalent organic frameworks to achieve improved photocatalytic hydrogen peroxide production under ambient conditions

Photocatalytic production of hydrogen peroxide (H2O2) presents a promising strategy for environmental remediation and energy production. However, achieving clean and efficient H2O2 production under ambient conditions without organic sacrificial agents remains challenging. Enhancing the low crystallinity of covalent organic frameworks (COFs) can promote the separation and transmission of photo-generated carriers, thereby boosting their photocatalytic performance. Herein, we introduce a novel synthetic approach by substituting traditional acetic acid catalysts with organic base catalysts to enhance the crystallinity of β-ketoenamine-linked COF, TpBD-COF. Compared to TpBD-COF-A synthesized using acetic acid catalysts, TpBD-COF-B, synthesized with organic base catalysts, exhibited advancements including increased absorption intensity in the visible spectrum, reduced photoluminescence intensity, enhanced photo-generated carrier separation performance, and a 2.1-fold increase in photocatalytic H2O2 production. Under visible light irradiation, TpBD-COF-B achieved a photocatalytic H2O2 production rate of 533 µmol/h/g using only air and water, without the need for organic sacrificial agents. Furthermore, TpBD-COF-B also exhibited good performance in long-term catalytic production experiments, tests with actual water bodies, and cyclic usage experiments. This study offers a strategy for enhancing the crystallinity of COFs to improve their photocatalytic activity, with promising applications in clean energy production and environmental remediation.

A Z-scheme photoelectrochemical biosensing platform based on Cu2O-sensitized hollow covalent organic frameworks for sensitive microcystin-LR detection

Photoactive materials play a crucial role in enhancing the sensitivity of photoelectrochemical (PEC) biosensors. In this work, we developed a highly sensitive Z-scheme PEC biosensing platform based on Cu2O-sensitized hollow structured covalent organic frameworks (HCOF-OMe) microspheres for the detection of microcystin-LR (MC-LR). The HCOF-OMe photoelectrode with enhanced PEC response can be sensitized by Cu2O nanocubes through the formation of a Z-scheme system, enabling the construction of a signal-on PEC biosensing platform. To amplify the detection signal, a homogeneous biosensing strategy was employed by integrating a DNA walker nanomachine-assisted CRISPR/Cas12a system. A DNA walker nanomachine was assembled on streptavidin-modified magnetic bead (MB) and initially locked by MC-LR aptamer. Upon MC- LR recognition, the walker DNA was allowed to hybridize with support DNA, exposing cleavage sites for the nicking endonuclease Nb.BbvCI, which can release the activator strand to trigger the trans-cleavage ability of CRISPR/Cas12a. As a result, Cu2O nanocubes were released from the MB-ssDNA-Cu2O complex and subsequently loaded on the HCOF-OMe photoelectrode, significantly improving the PEC signals. This enabled the sensitive assay of MC-LR over a wide linear range of 1.0 × 10-5-100 μg/L with a low detection limit of 4.6 × 10-6 μg/L. The proposed biosensing platform is highly versatile and can be extended to detect other environmental pollutants or biological disease markers.

Semiconducting Covalent Organic Frameworks

Semiconductors form the foundational bedrock of modern electronics and numerous cutting-edge technologies. Particularly, semiconductors crafted from organic building blocks hold immense promise as next-generation pioneers, thanks to their vast array of chemical structures, customizable frontier orbital energy levels and bandgap structures, and easily adjustable π electronic properties. Over the past 50 years, advancements in chemistry and materials science have facilitated extensive investigations into small organic π compounds, oligomers, and polymers, resulting in a rich library of organic semiconductors. However, a longstanding challenge persists: how to organize π building units or chains into well-defined π structures, which are crucial for the performance of organic semiconductors. Consequently, the pursuit of methodologies capable of synthesizing and/or fabricating organic semiconductors with ordered structures has emerged as a frontier in organic and polymeric semiconductor research. In this context, covalent organic frameworks (COFs) stand out as unique platforms allowing for the covalent integration of organic π units into periodically ordered π structures, thus facilitating the development of semiconductors with extended yet precisely defined π architectures. Since their initial report in 2008, significant strides have been made in exploring various chemistries to develop semiconducting COFs, resulting in a rich library of structures, properties, functions, and applications. This review provides a comprehensive yet focused exploration of the general structural features of semiconducting COFs, outlining the basic principles of structural design, illustrating the linkage chemistry and synthetic strategies based on typical one-pot polymerization reactions to demonstrate the growth of bulk materials, nanosheets, films, and membranes. By elucidating the interactions between COFs and various entities such as photons, phonons, electrons, holes, ions, molecules, and spins, this review categorizes semiconducting COFs into nine distinct sections: semiconductors, photoconductors, light emitters, sensors, photocatalysts, photothermal conversion materials, electrocatalysts, energy storage electrodes, and radical spin materials, focusing on disclosing structure-originated properties and functions. Furthermore, this review scrutinizes structure-function correlations and highlights the unique features, breakthroughs, and challenges associated with semiconducting COFs. Furnished with foundational knowledges and state-of-the-art insights, this review predicts the fundamental issues to be addressed and outlines future directions for semiconducting COFs, offering a comprehensive overview of this rapidly evolving and remarkable field.

Mechanistic Insights into the Formation of Nanofibrous Covalent Organic Frameworks (COFs) and their Promotion to the Catalysis of Hydrodechlorination

The nanoscale morphologies of COFs deeply affect their performance in practical applications. However, it still lacks studies to well understand their formation mechanism for guiding and controlling the synthesis for desired nanomorphology. To achieve more mechanistic insights into the formation of nanofibrous COFs, herein a series of nanofibrous and non-fibrous COFs are synthesized and the intrinsic relationships among the morphology, chemical constituent, structure planarity, and the DFT calculated interlayer stacking energy are investigated comprehensively. The study reveals the planarity of building monomers is not decisive for forming the nanofibrous COFs. The presence of electron-withdrawing triazine group in amine monomers and the electron-donating ─OH group in aldehyde monomers are essential for suppressing the growth of COF crystallites in x-y plane and promoting the stacking in z-direction to form nanofibrous COFs. The COF morphology can be modulated by the functional groups in monomers by regulating the competition between lateral reaction activity and interlayer stacking energy. The prepared nanofibrous COFs exhibited two-fold increased catalytic activity and better stability than the non-fibrous counterpart in hydrodechlorination. The new insights and proposed mechanism here can help open up a domain for precise designing and modulating the COF nanomorphology from molecular level for specific application.

Covalent Organic Frameworks with Tunable Bridge Positions for Photocatalytic CO2 Reduction to Propylene Under Visible Light Illumination

The use of sunlight to convert CO2 into multi-carbon fuels, particularly propylene, is considered a sustainable carbon cycle pathway, but propylene requires a multi-electron-coupled proton reaction process that has not been reported. Herein, two covalent organic frameworks (DA-COF and DP-COF) are prepared by varying the bridging positions of anthraquinone conjugated units. The experimental results show that the neighbouring bridge in DA-COF forms a unique cleavage structure like an enzyme catalyst, which can provide an efficient microenvironment for the reduction reaction to trap protons. At the same time, the neighbor bridging in DA-COF can form an electron donor-electron acceptor structure to accelerate the photogenerated carrier migration. As a result, DA-COF exhibits excellent visible light propylene production with a yield of 270.54 µmol g-1 and no C₃H₆ product is detected by the DP-COF during the reduction process. This study presents a novel avenue for the production of high value-added multi-carbon products using photocatalysis.

Three-Dimensional Mesoporous Covalent Organic Framework for Photocatalytic Oxidative Dehydrogenation to Quinoline

Developing precious metal-free catalysts for organic reactions under mild conditions is urgent. Herein, we report a three-dimensional covalent organic framework (3D-COF) with high crystallinity and permanent pores, termed 3D-TABPA-COF, for the oxidation of tetrahydroquinoline to quinoline. The 3D-TABPA-COF assembled based on N4,N4-bis(4'-amino-[1,1'-biphenyl]-4-yl)-[1,1'-biphenyl]-4,4'-diamine (TABPA) is the catalytic active center for the conversion of tetrahydroquinoline. The triphenylamine in the structure is an effective photosensitizer, which not only enhances the light absorption capacity but also facilitates the rapid transfer of photogenerated electrons and ensures effective carrier separation. The obtained 3D-TABPA-COF has a high specific surface area (2745.06 m2 g-1) and mesopores of 3.57 nm. This is attributed to the fact that the bor topology is not easy to interpenetrate. It can oxidize tetrahydroquinoline to obtain quinoline efficiently under visible light irradiation. In addition, we also performed various photochemical characterizations combined with density functional theory calculations to elucidate the reaction mechanism from tetrahydroquinoline to quinoline. This work provides a feasible strategy for constructing 3D-COF to achieve efficient photocatalytic organic reactions.

Expanding the Use of Benzothioxanthene Imides to Photochemistry: Eco-Friendly Aerobic Oxidation of Sulfides to Sulfoxides

The sulfoxide moiety is one of the most commonly utilized groups in pharmaceutical and industrial chemistry. The need for sustainability and easy accessibility to sulfoxide moieties is deemed necessary, due to its ubiquity in natural products and potentially pharmaceutically active compounds. In this context, we report herein a sustainable, aerobic and environmentally friendly photochemical protocol based on the use of a benzothioxathene imide as the photocatalyst to selectively oxidize sulfides under mild irradiation (456 nm), in very low catalyst loading (0.01 mol %) and on water. In addition, to demonstrate the compatibility of our protocol with wide scope of substrates, the latter was successfully applied to the synthesis of the biologically-active Sulforaphane and Modafinil.

Photocatalytic applications of covalent organic frameworks: synthesis, characterization, and utility

Photocatalysis has emerged as an energy efficient and safe method to perform organic transformations, and many semiconductors have been studied for use as photocatalysts. Covalent organic frameworks (COFs) are an established class of crystalline, porous materials constructed from organic units that are easily tunable. COFs importantly display semiconductor properties and respectable photoelectric behaviour, making them a strong prospect as photocatalysts. In this review, we summarize the design, synthetic methods, and characterization techniques for COFs. Strategies to boost photocatalytic performance are also discussed. Then the applications of COFs as photocatalysts in a variety of reactions are detailed. Finally, a summary, challenges, and future opportunities for the development of COFs as efficient photocatalysts are entailed.

Construction of Covalent Triazine Frameworks with Electronic Donor-Acceptor System for Efficient Photocatalytic C-H Hydroxylation of Imidazole[1,2-α]Pyridine Derivatives

Covalent triazine frameworks (CTFs) are promising heterogeneous photocatalyst candidates owing to their excellent stability, conjugacy, and tunability. In this study, a series of CTFs decorated with different substituents (H, MeO, and F) were synthesised and utilised as photocatalysts for C-H activation reactions. The corresponding optoelectronic properties could be precisely regulated by the electronic effects of different substituents in the nanopore channels of the CTFs; these CTFs were effective photocatalysts for C-H activation in organic synthesis due to their unique structures and optoelectronic properties. Methoxy-substituted CTF (MeO-CTF) exhibited extraordinary catalytic performance and reusability in C-H functionalization by constructing an electronic donor-acceptor system, achieving the highest yield in the photocatalytic C3-H hydroxylation of 2-phenylimidazole[1,2-α]pyridine. This strategy provides a new scaffold for the rational design of CTFs as efficient photocatalysts for organic synthesis.

Regulating Conformational Locking in Covalent Organic Framework for Selective and Recyclable Photocatalytic Transformation

The exploration of new properties and functionality of covalent organic frameworks (COFs) rely mostly on the covalent modification of the starting building blocks or linkages. Noncovalent forces that guide the assembly and adhesion of layers to develop two-dimensional (2D) COFs and improve their bulk properties and functionalities, however, are rarely explored. Herein, the "conformational lock" (CL) effect in 2D hydrazine-linked COFs with intralayer F-H interaction is discovered and regulated to stabilize interlayer adhesion and develop a facile strategy to increase their stability, promote selectivity and efficiency in reactive singlet oxygen (1O2)-triggered photocatalytic transformation when acting as photocatalysts. The CL strategy endows the fluorinated COFs with an efficient intersystem crossing process for 1O2 generation and strong interlayer π-π stacking interaction. The 4F-COF with the strongest F-H noncovalent interaction exhibits the highest photocatalytic conversion and selectivity (exceeding 98%) in typical 1O2-dependent transformations, even over 7 continuous photocatalytic cycles. This work demonstrates that promoting intralayer noncovalent interaction in 2D-COFs can impart high photocatalytic activity and stability, and would vigorously inspire their developments in heterogeneous catalysis.

Anthraquinones-based photocatalysis: A comprehensive review

In recent years, there has been significant interest in photocatalytic technologies utilizing semiconductors and photosensitizers responsive to solar light, owing to their potential for energy and environmental applications. Current efforts are focused on enhancing existing photocatalysts and developing new ones tailored for environmental uses. Anthraquinones (AQs) serve as redox-active electron transfer mediators and photochemically active organic photosensitizers, effectively addressing common issues such as low light utilization and carrier separation efficiency found in conventional semiconductors. AQs offer advantages such as abundant raw materials, controlled preparation, excellent electron transfer capabilities, and photosensitivity, with applications spanning the energy, medical, and environmental sectors. Despite their utility, comprehensive reviews on AQs-based photocatalytic systems in environmental contexts are lacking. In this review, we thoroughly describe the photochemical properties of AQs and their potential applications in photocatalysis, particularly in addressing key environmental challenges like clean energy production, antibacterial action, and pollutant degradation. However, AQs face limitations in practical photocatalytic applications due to their low electrical conductivity and solubility-related secondary contamination. To mitigate these issues, the design and synthesis of graphene-immobilized AQs are highlighted as a solution to enhance practical photocatalytic applications. Additionally, future research directions are proposed to deepen the understanding of AQs' theoretical mechanisms and to provide practical applications for wastewater treatment. This review aims to facilitate mechanistic studies and practical applications of AQs-based photocatalytic technologies and to improve understanding of these technologies.

Construction of Donor-Acceptor-Type Conjugated Microporous Polymers by Oxidative Coupling of Boranil-Carbazole Mixed Monomers for Enhanced Photocatalytic Oxidation

Conjugated microporous polymers (CMPs), featuring photoactive structures, a high surface area, robust thermal stability, and facile modulation, provide a versatile platform for fabricating diverse heterogeneous photocatalysts. The incorporation of donor-acceptor (D-A) structures into CMPs to increase their charge separation potential and enhance the photocatalytic efficacy is a viable strategy. In this work, we designed and synthesized a unique set of D-A monomers, incorporating boranil dyes as electron-deficient moieties and carbazoles as electron-rich subunits. Subsequently, D-A CMPs were prepared via an economical and environmentally friendly oxidation coupling reaction, and their potential in photocatalytic oxidation reactions was investigated. Modulation of the polymer's photoelectronic properties and photocatalytic performance can be achieved by adjusting the boranil content in the monomer. The polymer pCZFB-3, with the highest content of boranil units, exhibited an optimal photocatalytic activity. This finding confirms that strengthening the D-A effect can significantly enhance a catalyst's photoelectronic properties and catalytic efficacy. This study presents insights into designing innovative heterogeneous photocatalysts based on boron-containing dyes.

Covalent Organic Framework Catalyzed Amide Synthesis Directly from Alcohol Under Red Light Excitation

The dehydrogenative coupling of alcohols and amines to form amide bonds is typically catalysed by homogeneous transition metal catalysts at high temperatures ranging from 130-140 °C. In our pursuit of an efficient and recyclable photocatalyst capable of conducting this transformation at room temperature, we report herein a COF-mediated dehydrogenative synthesis. The TTT-DHTD COF was strategically designed to incorporate a high density of functional units, specifically dithiophenedione, to trap photogenerated electrons and effectively facilitate hydrogen atom abstraction reactions. The photoactive TTT-DHTD COF, synthesized using solvothermal methods showed high crystallinity and moderate surface area, providing an ideal platform for heterogeneous amide synthesis. Light absorption by the COF across the entire visible range, narrow band gap, and valence band position make it well-suited for the efficient generation of excitons necessary for targeted dehydrogenation. Utilizing red light irradiation and employing extremely low loading of the COF, we have successfully prepared a wide range of amides, including challenging secondary amides, in good to excellent yields. The substrates' functional group tolerance, very mild reaction conditions, and the catalyst's significant recyclability represent substantial advancements over prior methodologies.

Triazine-Carbazole-Based Covalent Organic Frameworks as Efficient Heterogeneous Photocatalysts for the Oxidation of N-aryltetrahydroisoquinolines

Covalent organic frameworks (COFs) have attracted growing interests as new material platform for a range of applications. In this study, a triazine-carbazole-based covalent organic framework (COF-TCZ) was designed as highly porous material with conjugated donor-acceptor networks, and feasibly synthesized by the Schiff condensation of 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tr ianiline (TAPB) and 9-(4-formylphenyl)-9H-carbazole-3,6-dicarbaldehyde (CZTA) under the solvothermal condition. Considering the effect of linkage, the imine-linked COF-TCZ was further oxidized to obtain an amide-linked covalent organic framework (COF-TCZ-O). The as-synthesized COFs show high crystallinity, good thermal and chemical stability, and excellent photoactive properties. Two π-conjugated triazine-carbazole-based COFs with tunable linkages are beneficial for light-harvesting capacity and charge separation efficiency, which are empolyed as photocatalysts for the oxidation reaction of N-aryltetrahydroisoquinoline. The COFs catalyst systems exhibit the outstanding photocatalytic performance with high conversion, photostability and recyclability. Photoelectrochemical tests were employed to examine the behavior of photogenerated charge carriers in photo-illumination system. The control experiments provide further insights into the nature of photocatalysis. In addition, the current research also provided a valuable approach for developing photofunctional COFs to meet challenge in achieving the great potential of COFs materials in organic conversion.

Interlayer synergistic reaction of radical precursors for ultraefficient 1O2 generation via quinone-based covalent organic framework

Singlet oxygen (1O2) is important in the environmental remediation field, however, its efficient production has been severely hindered by the ultrafast self-quenching of the as-generated radical precursors in the Fenton-like reactions. Herein, we elaborately designed lamellar anthraquinone-based covalent organic frameworks (DAQ-COF) with sequential localization of the active sites (C═O) at molecular levels for visible-light-assisted peroxymonosulfate (PMS) activation. Theoretical and experimental results revealed that the radical precursors (SO5·-) were formed in the nearby layers with the migration distance less than 0.34 nm, via PMS donating electrons to the photogenerated holes. This interlayer synergistic effect eventually led to ultraefficient 1O2 production (14.8 μM s-1), which is 12 times that of the highest reported catalyst. As an outcome, DAQ-COF enabled the complete degradation of bisphenol A in 5 min with PMS under natural sunlight irradiation. This interlayer synergistic concept represents an innovative and effective strategy to increase the utilization efficiency of ultrashort-lived radical precursors, providing inspirations for subtle structural construction of Fenton-like catalysts.

Insight on photocatalytic synchronous oxidation and reduction for pollutant removal: Chemical energy conversion between macromolecular organic pollutants and heavy metal

Collaborative treatment of pollutants is a promising approach for wastewater treatment. In this work, a covalent organic framework material (COFs) with an imine structure was synthesised by the Schiff base reaction, and photochemical tests showed good photochemical effects. It was used to explore the photocatalytic treatment of co-existing pollutants (heavy metal ions and antibiotics) and the performance of treating co-existing wastewater was investigated. The degradation performance of levofloxacin (LVX) and Cr(VI) was improved in the coexisting pollutants system, with the LVX degradation being 4.2 times more effective than that of the LVX solitary system. Moreover, this phenomenon was also observed in LVX/Ag(I), LVX/Fe(III), sulfadiazine/Cr(VI), norfloxacin/Cr(VI) and tetracycline/Cr(VI) systems. The analysis of active species suggesting that the synergistic promotion of photocatalytic oxidation-reduction systems was not only promoting from the improvement of simple charge separation, but it was also found that high-valent metal species can act directly in the oxidative decomposition of antibiotics. The interaction of pollutants and intermediates were rationally exploited and confirmed by control experiments and theoretical calculation. This conclusion helps us to re-examine the underlying mechanisms of photocatalytic synchronous oxidation and reduction reactions, simultaneously beneficial for the development of mixed pollutant control processes.

A Versatile Strategy toward Donor-Acceptor Nanofibers with Tunable Length/Composition and Enhanced Photocatalytic Activity

Living crystallization-driven self-assembly (CDSA) has emerged as an efficient strategy to generate nanofibers of π-conjugated polymers (CPNFs) in a controlled fashion. However, reports of donor-acceptor (D-A) heterojunction CPNFs are extremely rare. The preparation of these materials remains a challenge due to the lack of rational design guidelines for the D-A π-conjugated units. Herein, we report a versatile CDSA strategy based upon carefully designed D-A-co-oligomers in which electron-deficient benzothiadiazole (BT) or dibenzo[b,d]thiophene 5,5-dioxide (FSO) units are attached to the two ends of an oligo(p-phenylene ethynylene) heptamer [BT-OPE7-BT, FSO-OPE7-FSO]. This arrangement with the electron-deficient groups at the two ends of the oligomer enhances the stacking interaction of the A-D-A π-conjugated structure. In contrast, D-A-D structures with a single BT in the middle of a string of OPE units disrupt the packing. We employed oligomers with a terminal alkyne to synthesize diblock copolymers BT-OPE7-BT-b-P2VP and BT-OPE7-BT-b-PNIPAM (P2VP = poly(2-vinylpyridine), PNIPAM = poly(N-isopropylacrylamide)) and FSO-OPE7-FSO-b-P2VP and FSO-OPE7-FSO-b-PNIPAM. CDSA experiments with these copolymers in ethanol were able to generate CPNFs of controlled length by both self-seeding and seeded growth as well as block comicelles with precisely tunable length and composition. Furthermore, the D-A CPNFs with a BT-OPE7-BT-based core demonstrate photocatalytic activity for the photooxidation of sulfide to sulfoxide and benzylamine to N-benzylidenebenzylamine. Given the scope of the oligomer compositions examined and the range of structures formed, we believe that the living CDSA strategy with D-A-based co-oligomers opens future opportunities for the creation of D-A CPNFs with programmable architectures as well as diverse functionalities and applications.

Photocatalytic Decarboxylative Fluorination by Quinone-Based Isoreticular Covalent Organic Frameworks

The strategic incorporation of fluorine atoms into molecules has become a cornerstone of modern pharmaceuticals, agrochemicals, and materials science. Herein, we have developed a covalent organic framework (COF)-based, robust photocatalyst that enables the photofluorodecarboxylation reaction of diverse carboxylic acids, producing alkyl fluorides with remarkable efficiency. The catalytic activity of an anthraquinone-based COF catalyst TpAQ outperforms other structurally analogous β-ketoenamine COFs. Through comprehensive control experiments, photoluminescence, and electrochemical studies, we have elucidated the unique features of the material and the mechanistic pathway. This in-depth understanding has paved the way for optimizing the reaction conditions and achieving high yields of alkyl fluorides. The versatility of this protocol extends to a broad range of aliphatic acids with diverse functional groups and heterocycles. It also enabled the late-stage diversification of anti-inflammatory drugs and steroid derivatives. This opens up exciting possibilities for synthesizing novel pharmaceuticals and functionalized molecules. The methodology was also generalized to other light-mediated decarboxylative halogenation reactions. Furthermore, our method demonstrates scalability under both batch and continuous flow conditions, offering a promising approach for large-scale production. Additionally, the TpAQ catalyst exhibits exceptional durability and can be reused multiple times without significant activity loss (>80% yield after the eighth cycle), making it a sustainable and cost-effective solution. This work lays the foundation for developing efficient and sustainable light-driven synthesis methods using COFs as photocatalysts with potential applications beyond alkyl halide synthesis.

Tailoring β-ketoenamine covalent organic framework with azo for blue light-driven selective oxidation of amines with oxygen

Covalent organic frameworks (COFs) present bright prospects in visible light photocatalysis with abundant active sites and exceptional stability. Tailoring an established COF with photoactive group is a prudent strategy to extend visible light absorption toward broad photocatalysis. Here, a β-ketoenamine COF, TpBD-COF, constructed with 1,3,5-triformylphloroglucinol (Tp) and 4,4'-biphenyldiamine (BD), is tailored with azo to validate this strategy. The insertion of azo into BD affords 4,4'-azodianiline (Azo); TpAzo-COF is successfully constructed with Tp and Azo. Intriguingly, the insertion of azo enhances π-conjugation, thereby facilitating visible light absorption and intramolecular electron transfer. Moreover, TpAzo-COF, with an appropriate electronic structure and impressive specific surface area of 1855 m2 g-1, offers substantial active sites conducive to the reduction of oxygen (O2) to superoxide. Compared with TpBD-COF, TpAzo-COF exhibits superior performance for blue light-driven oxidation of amines with O2. Superoxide controls the selective formation of product imines. This work foreshadows the remarkable capacity of tailoring COFs with photoactive group toward broad visible light photocatalysis.

Core-Shell Gold Nanoparticles@Pd-Loaded Covalent Organic Framework for In Situ Surface-Enhanced Raman Spectroscopy Monitoring of Catalytic Reactions

A core-shell nanostructure of gold nanoparticles@covalent organic framework (COF) loaded with palladium nanoparticles (AuNPs@COF-PdNPs) was designed for the rapid monitoring of catalytic reactions with surface-enhanced Raman spectroscopy (SERS). The nanostructure was prepared by coating the COF layer on AuNPs and then in situ synthesizing PdNPs within the COF shell. With the respective SERS activity and catalytic performance of the AuNP core and COF-PdNPs shell, the nanostructure can be directly used in the SERS study of the catalytic reaction processes. It was shown that the confinement effect of COF resulted in the high dispersity of PdNPs and outstanding catalytic activity of AuNPs@COF-PdNPs, thus improving the reaction rate constant of the AuNPs@COF-PdNPs-catalyzed hydrogenation reduction by 10 times higher than that obtained with Au/Pd NPs. In addition, the COF layer can serve as a protective shell to make AuNPs@COF-PdNPs possess excellent reusability. Moreover, the loading of PdNPs within the COF layer was found to be in favor of avoiding intermediate products to achieve a high total conversion rate. AuNPs@COF-PdNPs also showed great catalytic activities toward the Suzuki-Miyaura coupling reaction. Taken together, the proposed core-shell nanostructure has great potential in monitoring and exploring catalytic processes and interfacial reactions.

Unveiling the exciton dissociation dynamics steered by built-in electric fields in conjugated microporous polymers for photoreduction of uranium (VI) from seawater

Developing highly efficient photocatalysts based on conjugated microporous polymers (CMPs) are often impeded by the intrinsically large exciton binding energy and sluggish charge transfer kinetics that result from their vulnerable driving force. Herein, a family of pyrene-based nitrogen-implanted CMPs were constructed, where the nitrogen gradient was regulated. Accordingly, the built-in electric field endowed by the nitrogen gradient dramatically accelerates the dissociation of exciton into free carriers, thereby enhancing charge separation efficiency. As a result, PyCMP-3N generated by polymerization of 1,3,6,8-tetrakis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyrene and 2,4,6-tris(4-bromophenyl)-1,3,5-triazine featured an optimized built-in electric field and exhibited the highest photocatalytic removal efficiency of uranium (VI) (99.5 %). Our proposed strategy not only provides inspiration for constructing the built-in electric field by controlling nitrogen concentration gradients, but also offers an in-depth understanding the crucial role of built-in electric field in exciton dissociation and charge transfer, efficiently promoting CMPs photocatalysis.

Redox-Active Organic Materials: From Energy Storage to Redox Catalysis

Electroactive materials are central to myriad applications, including energy storage, sensing, and catalysis. Compared to traditional inorganic electrode materials, redox-active organic materials such as porous organic polymers (POPs) and covalent organic frameworks (COFs) are emerging as promising alternatives due to their structural tunability, flexibility, sustainability, and compatibility with a range of electrolytes. Herein, we discuss the challenges and opportunities available for the use of redox-active organic materials in organoelectrochemistry, an emerging area in fine chemical synthesis. In particular, we highlight the utility of organic electrode materials in photoredox catalysis, electrochemical energy storage, and electrocatalysis and point to new directions needed to unlock their potential utility for organic synthesis. This Perspective aims to bring together the organic, electrochemistry, and polymer communities to design new heterogeneous electrocatalysts for the sustainable synthesis of complex molecules.

Naphthalene-based donor-acceptor covalent organic frameworks as an electron distribution regulator for boosting photocatalysis

By incorporating the electron-rich naphthalene and electron-deficient triazine as an electron donor and an electron acceptor, a new donor-acceptor covalent organic framework as an electron distribution regulator was obtained for boosting photocatalytically oxidative coupling of benzylamines and selective oxidation of thioethers under the irradiation of green light (520 nm).

Keto-anthraquinone covalent organic framework for H2O2 photosynthesis with oxygen and alkaline water

Hydrogen peroxide photosynthesis suffers from insufficient catalytic activity due to the high energy barrier of hydrogen extraction from H2O. Herein, we report that mechanochemically synthesized keto-form anthraquinone covalent organic framework which is able to directly synthesize H2O2 (4784 μmol h-1 g-1 at λ > 400 nm) from oxygen and alkaline water (pH = 13) in the absence of any sacrificial reagents. The strong alkalinity resulted in the formation of OH-(H2O)n clusters in water, which were adsorbed on keto moieties within the framework and then dissociated into O2 and active hydrogen, because the energy barrier of hydrogen extraction was largely lowered. The produced hydrogen reacted with anthraquinone to generate anthrahydroquinone, which was subsequently oxidized by O2 to produce H2O2. This study ultimately sheds light on the importance of hydrogen extraction from H2O for H2O2 photosynthesis and demonstrates that H2O2 synthesis is achievable under alkaline conditions.

Expanding Olefin-Linked Covalent Organic Frameworks toward Selective Photocatalytic Oxidation of Organic Sulfides

Olefin-linked covalent organic frameworks (COFs) have exhibited great potential in visible-light photocatalysis. In principle, expanding fully conjugated COFs can facilitate light absorption and charge transfer, leading to improved photocatalysis. Herein, three olefin-linked COFs with the same topology are synthesized by combining 2,4,6-trimethyl-1,3,5-triazine (TMT) with 1,3,5-triformylbenzene (TFB), 1,3,5-tris(4-formylphenyl)benzene (TFPB), and 1,3,5-tris(4-formylphenylethynyl)benzene (TFPEB), namely, TMT-TFB-COF, TMT-TFPB-COF, and TMT-TFPEB-COF, respectively. From TMT-TFB-COF to TMT-TFPB-COF, expanding phenyl rings provides only limited expansion for π-conjugation due to the steric effect of structural twisting. However, from TMT-TFPB-COF to TMT-TFPEB-COF, the insertion of acetylenes eliminates the steric effect and provides more delocalized π-electrons. As such, TMT-TFPEB-COF exhibits the best optoelectronic properties among these three olefin-linked COFs. Consequently, the photocatalytic performance of TMT-TFPEB-COF is much better than those of TMT-TFB-COF and TMT-TFPB-COF on the oxidation of organic sulfides into sulfoxides with oxygen. The desirable reusability and substrate compatibility of the TMT-TFPEB-COF photocatalyst are further confirmed. The selective formation of organic sulfoxides over TMT-TFPEB-COF under blue light irradiation proceeds via both electron- and energy-transfer pathways. This work highlights a rational design of expanding the π-conjugation of fully conjugated COFs toward selective visible-light photocatalysis.

Metal-Free Activation of Molecular Oxygen by 9-Fluorenone-Based Porous Organic Polymers for Selective Aerobic Oxidation

Oxygen activation is a critical step in heterogeneous oxidative processes, particularly in catalytic, electrolytic, and pharmaceutical applications. Among the various catalysts available for photocatalytic O2 activation, homogeneous aryl ketones are at the forefront. To avoid the degradation and deactivation of aryl ketones, 9-fluorenone-based porous organic polymers were designed and regulated by doping them with co-monomers. The obtained heterogeneous photocatalyst showed good performance in O2 activation, and its performance was better than that of homogeneous 9-fluorenone. The obtained heterogeneous photocatalyst showed good reusability. We believe that the presented method and findings represent an important step toward designing catalysts tailored for specific tasks.

Topology-Selective Manipulation of Two-Dimensional Covalent Organic Frameworks

The manipulation of topological architectures in two-dimensional (2D) covalent organic framework (COF) materials for different applications is promising but remains a great challenge. Here, we first report the topology-selective synthesis of two distinct varieties of 2DCOFs, imine-based HT-COFs and benzimidazole-fused BI-HT-COFs, by simply altering acid catalysts. To HT-COFs, a superlattice of 1D channel with a persistent triangular shape is formed via Schiff base reaction, while to BI-HT-COFs, a hexagonal lattice structure with a highly conjugated structure and imidazole linkages is constructed due to an imine-based cyclization reaction. The two COFs exhibited marked differences in their bandgap, chemical stability, molecular adsorption, and catalytic activity, which make them have different fields of application. This work not only diversifies the hexaaminotriphenylene-based 2DCOF topologies but also provides vivid examples of structure-property relationships, which would facilitate fundamental research and potential applications of 2DCOFs.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Recent Progress of Covalent Organic Frameworks-Based Materials in Photocatalytic Applications: A Review

Covalent organic frameworks (COFs) are one type of porous organic materials linked by covalent bonds. COFs materials exhibit many outstanding characteristics such as high porosity, high chemical and thermal stability, large specific surface area, efficient electron transfer efficiency, and the ability for predesigned structures. These exceptional advantages enable COFs materials to exhibit remarkable performance in photocatalysis. Additionally, the activity of COFs materials as photocatalysts can be significantly upgraded by ion doping and the formation of heterojunctions. This paper summarizes the latest research progress on COF-based materials applied in photocatalytic systems. Initially, typical structures and preparation methods of COFs are analyzed and compared. Moreover, the essential principles of photocatalytic reactions over COFs-based materials and the latest research developments in photocatalytic hydrogen production, CO2 reduction, pollutants elimination, organic transformation, and overall water splitting are indicated. At last, the outlook and challenges of COF-based materials in photocatalysis are discussed. This review is intended to permit instructive guidance for the efficient use of photocatalysis based on COFs in the future.

A new hydrazone linkage-based covalent organic framework for ratiometric fluorescent probe detection of hypochlorite

A new hydrazone-linked covalent organic framework (TFTH-COF) was synthesized and characterized. TFTH-COF has porous crystalline framework structure with high thermal stability. TFTH-COF exhibited highly selective fluorescence blue-shift response towards hypochlorite (ClO-) in ethanol and accompanied by the obvious color change under both day light and UV light. TFTH-COF has the ratiometric fluorescence sensing ability for hypochlorite with high sensitivity. The ratiometric fluorescence intensity of TFTH-COF presented a linear change against hypochlorite concentration with a low detection limit of 0.417 μM. The results of XPS, FT-IR and fluorescence lifetime indicated the formation of hydrogen bond between the O and N atoms of hydroxyl and amine of TFTH-COF with hypochlorite. The DFT calculation further confirmed the formation of hydrogen bond and resulted in the change of fluorescence spectra. Its practical application ability was confirmed by good recovery rate of TFTH-COF in the quantitative detection of hypochlorite in 84 disinfectants and water samples. Moreover, TFTH-COF can also identify hypochlorite through fluorescent test strips by the naked eye. This work sheds light on the fabrication of COFs as ratiometric fluorescence probes for easily-operable, instantaneous and accurate detection and identification of different analytes.

Ru(N^N)3-docked cationic covalent organic frameworks for enhanced sulfide and amine photooxidation

Covalent organic frameworks (COFs) have emerged as significant candidates for visible-light photocatalysis due to their ability to regulate performance which is achieved through the careful selection of building modules, framework conjugation, and post-modification. This report focused on the efficient transformation of an imine-linked I-COF into a π-conjugated quinoline-based Q-COF, which enhanced both the chemical stability and conjugation of the network. By methylating the pyridyl groups in the Q-COF, an N+-COF was obtained. Subsequently, the Ru(N^N)3-photosensitizer ([Ru(dcbpy)3]4-) was incorporated into the channels of the cationic N+-COF through electrostatic interactions, resulting in the formation of [Ru(dcbpy)3]4-⊂N+-COF. This composite exhibited exceptional photocatalytic activity, demonstrating high yields and selectivity in the oxidation of sulfides or amines to their respective products.

Proximity-Enabled Photochemical C-H Functionalization using a Covalent Organic Framework-Confined Fe2IV-μ-oxo Species in Water

Water has been recognized as an excellent solvent for maneuvering both the catalytic activity and selectivity, especially in the case of heterogeneous catalysis. However, maintaining the active catalytic species in their higher oxidation states (IV/V) while retaining the catalytic activity and recyclability in water is an enormous challenge. Herein, we have developed a solution to this problem using covalent organic frameworks (COFs) to immobilize the (Et4N)2[FeIII(Cl)bTAML] molecules, taking advantage of the COF's morphology and surface charge. By using the visible light and [CoIII(NH3)5Cl]Cl2 as a sacrificial electron acceptor within the COF, we have successfully generated and stabilized the [(bTAML)FeIV-O-FeIV(bTAML)]- species in water. The COF backbone simultaneously acts as a porous host and a photosensitizer. This is the first time that the photochemically generated Fe2IV-μ-oxo radical cation species has demonstrated high catalytic activity with moderate to high yield for the selective oxidation of the unactivated C-H bonds, even in water. To enhance the catalytic activity and achieve good recyclability, we have developed a TpDPP COF film by transforming the TpDPP COF nanospheres. We have achieved the regio- and stereoselective functionalization of unactivated C-H bonds of alkanes and alkenes (3°:2° = 102:1 for adamantane with the COF film), which is improbable in homogeneous conditions. The film exhibits C-H bond oxidation with higher catalytic yield (32-98%) and a higher degree of selectivity (cis/trans = 74:1; 3°:2° = 100:1 for cis-decalin).

Influence laws of air gap structure manipulation of covalent organic frameworks on dielectric properties and exciton effects for photopolymerization

Boosting the dissociation of excitons is essential to enhance the photocatalytic efficiency. However, the relationship between the structure of the catalyst and the exciton effect on the photocatalytic activity is still unclear as the main problem. Here, it is proposed that as a descriptive factor, an experimentally measurable dielectric constant (εr) is available to quantitatively describe its relationship with exciton binding energy (Eb) and photocatalytic activity. With tuning the linker of covalent organic frameworks (COFs), the "air gap" structure is oriented to shrink, leading to an increased εr of COFs and a lower Eb to facilitate exciton dissociation. Meanwhile, taking "water-/oxygen-fueled" photo-induced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization as a demonstration platform, it can be seen that COFs with a small "air gap" structure have relatively superior photocatalytic activity. This provides important implications for the evolution of efficient photocatalysts.

Benzothiadiazole covalent organic framework photocatalysis with an electron transfer mediator for selective aerobic sulfoxidation

Covalent organic frameworks (COFs) are promising visible light photocatalysts for aerobic oxidation reactions. However, COFs usually suffer from the assault of reactive oxygen species, leading to hindered electron transfer. This scenario could be addressed by integrating a mediator to promote photocatalysis. Starting with 4,4'-(benzo-2,1,3-thiadiazole-4,7-diyl)dianiline (BTD) and 2,4,6-triformylphloroglucinol (Tp), TpBTD-COF is developed as a photocatalyst for aerobic sulfoxidation. Adding an electron transfer mediator 2,2,6,6-tetramethylpiperidine-1‑oxyl (TEMPO), the conversions are radically accelerated, over 2.5 times of that without TEMPO. Moreover, the robustness of TpBTD-COF is preserved by TEMPO. Remarkably, TpBTD-COF could endure multiple cycles of sulfoxidation, even with higher conversions than the fresh one. TpBTD-COF photocatalysis with TEMPO implements diverse aerobic sulfoxidation by an electron transfer pathway. This work highlights that benzothiadiazole COFs are an avenue for tailor-made photocatalytic transformations.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Selective oxidation of amines powered with green light and oxygen over an anthraquinone covalent organic framework

The exploration of emerging photocatalysts like covalent organic frameworks (COFs) is an essential but challenging endeavor to find sustainable solutions for selective organic transformations. Anthraquinones are envisaged to construct COFs for visible light photocatalysis because their derivatives are employed industrially as oxidation catalysts or organic dyes. Herein, an anthraquinone COF, TpAQ-COF, is successfully constructed with 1,3,5-triformylphloroglucinol (Tp) and 2,6-diaminoanthraquinone (AQ). Then, the selective oxidation of amines over TpAQ-COF is implemented. Amines can be effectively converted into corresponding imines over TpAQ-COF powered with green light and oxygen, during which superoxide radical anion is discerned as the pivotal reactive oxygen species. This work suggests that COFs could inherit the advantages of molecular building blocks for selective reactions powered with broad visible light.

Photo-responsive oxidase-like nanozyme based on a vanadium-docked porphyrinic covalent organic framework for colorimetric L-Arginine sensing

This study reports the development of a vanadium-docked porphyrinic covalent organic framework as a novel class of highly polar photoactive materials. Thanks to its extended π-electron conjugation and high chemical stabilities, this framework can serve as an oxidase-Like photo-nanozyme for photocatalytic oxidation of o-phenylenediamine (o-PDA) and a colorimetric substrate for the production of the yellow-colored oxidized o-PDA (o-PDAox). The physicochemical properties of the as-prepared photo-nanozyme were characterized by several analytical techniques. Its enhanced light harvesting and charge separation and transfer were also verified by electrochemical and spectroscopic analysis. This photo-nonenzymatic colorimetric assay was applied for the sensitive L-Arginine (L-Arg) detection as a typical amino acid in the linear range of 8.1 nM-330 μM with a limit of detection (LOD) of 3.5 nM. The findings of this research confirmed the safety and feasibility of the proposed photo-nonenzymatic colorimetric sensing strategy for the detection of L-Arg and other similar biomolecules in food samples. Kinetic investigation revealed that the photo-responsive oxidase mimic exhibits satisfactory K_m (0.47 mM) and V_max (42.0 μM/s) values. This work broadened our insight into the development of modified porphyrinic-COF-based visible light-responsive oxidase-like photo-nanozyme for environmentally friendly colorimetric biosensing.

Covalent Organic Frameworks as Porous Pigments for Photocatalytic Metal-Free C-H Borylation

Covalent organic frameworks (COFs) are highly promising as heterogeneous photocatalysts due to their tunable structures and optoelectronic properties. Though COFs have been used as heterogeneous photocatalysts, they have mainly been employed in water splitting, carbon dioxide reduction, and hydrogen evolution reactions. A few examples in organic synthesis using metal-anchored COF photocatalysts were reported. Herein, we report highly stable β-keto-enamine-based COFs as photocatalysts for metal-free C-B bond formation reactions. Three different COFs have been availed for this purpose. Their photocatalysis performances have been monitored for 12 different substrates, like quinolines, pyridines, and pyrimidines. All the COFs showcase moderate-to-high yields (up to 96%) depending upon the substrate's molecular functionality. High crystallinity, a large surface area, a low band gap, and a suitable band position result in the highest catalytic activity of TpAzo COF. The thorough mechanistic investigation further highlights the crucial role of light-harvesting capacity, charge separation efficiency, and current density during catalysis. The light absorbance capacity of the COF plays a critical role during catalysis as yields are maximized near the COF's absorption maxima. The high photostability of the as-synthesized COFs offers their reusability for several (>5) catalytic cycles.

Enzyme-Inspired Coordination Polymers for Selective Oxidization of C(sp3)-H Bonds via Multiphoton Excitation

Nature's blueprint provides the fundamental principles for expanding the use of abundant metals in catalysis; however, mimicking both the structure and function of copper enzymes simultaneously in one artificial system for selective C-H bond oxidation faces marked challenges. Herein, we report a new approach to the assembly of artificial monooxygenases utilizing a binuclear Cu₂S₂Cl₂ cluster to duplicate the identical structure and catalysis of the Cu_A enzyme. The designed monooxygenase Cu-Cl-bpyc facilitates well-defined redox potential that initially activated O₂via photoinduced electron transfer, and generated an active chlorine radical via a ligand-to-metal charge transfer (LMCT) process from the consecutive excitation of the in situ formed copper(II) center. The chlorine radical abstracts a hydrogen atom selectively from C(sp³)-H bonds to generate the radical intermediate; meanwhile, the O₂^•- species interacted with the mimic to form mixed-valence species, giving the desired oxidization products with inherent product selectivity of copper monooxygenases and recovering the catalyst directly. This enzymatic protocol exhibits excellent recyclability, good functional group tolerance, and broad substrate scope, including some biological and pharmacologically relevant targets. Mechanistic studies indicate that the C-H bond cleavage was the rate-determining step and the cuprous interactions were essential to stabilize the active oxygen species. The well-defined structural characters and the fine-modified catalytic properties open a new avenue to develop robust artificial enzymes with uniform and precise active sites and high catalytic performances.

Rational modification of hydroxy-functionalized covalent organic frameworks for enhanced photocatalytic hydrogen peroxide evolution

Covalent organic frameworks (COFs), a class of flexibly tunable crystalline materials, have fascinating potential in photocatalytic hydrogen peroxide (H2O2) evolution under visible light irradiation. However, achieving efficient catalytic activity by tuning the composition of COFs and the linkages of building blocks is still a challenge. Herein, four imine-linked COFs with different numbers of hydroxy-functionalized are constructed to unveil the latent structure-activity relationship between the reversibility of bonding in supramolecular chemistry and the photocatalytic H2O2 performance. As the optimized material, TAPT-HTA-COF (1H-COF) containing single hydroxy group in aldehyde node exhibits a highest ordered structure and conjugation degree along and across the plane in the extended frameworks originating from the flexibly reversible iminol-to-ketoenamine tautomerism than others, which broadens the visible light absorption and accelerates the dissociation of photogenerated carriers in 1H-COF. These merits ensure that 1H-COF has the highest H2O2 yield (44.5 μmol L-1) and O2 two-electron reduction pathway among the four COFs under visible light irradiation (λ > 420 nm, 10 vol% isopropanol aqueous solution). At the same time, the long-range ordered framework of 1H-COF is well preserved during the photocatalytic H2O2 evolution process assisted by the proton-induced tautomerization. This work facilitates the design and development of COF-based photocatalysts in the evolution of H2O2.

KuQuinone as a Highly Stable and Reusable Organic Photocatalyst in Selective Oxidation of Thioethers to Sulfoxides

A chemoselective photocatalytic system to perform thioether oxidation to sulfoxide is presented. The light-induced oxidation process is here promoted by a metal-free quinoid catalyst, namely 1-hexylKuQuinone (KuQ). Reactions performed in a fluorinated solvent (i.e., HFIP), using O₂ as the oxidant, at room temperature, lead to complete thioanisole conversion to methyl phenyl sulfoxide in 60 min. Remarkably, the system can be recharged and recycled without a loss of activity and selectivity, reaching turnover numbers (TONs) higher than 4000. Excellent catalytic performances and full selectivity have also been obtained for the photocatalytic oxidation of substituted thioanisole derivatives, aliphatic, cyclic, and diaryl thioethers. Likewise, the oxidation of heteroaromatic organosulfur compounds can be accomplished, with longer reaction times.

Natural Sunlight Photocatalytic Synthesis of Benzoxazole-Bridged Covalent Organic Framework for Photocatalysis

Although natural sunlight-mediated photocatalysis is a clean, efficient, and green approach to access organic products, its application in the synthesis of covalent organic frameworks (COFs), however, is still unprecedented. Herein, we first report the sunlight photocatalytic synthesis of COF under ambient conditions. Furthermore, this "window ledge" reaction generated benzoxazole-linked COF is stable and can be applied as a reusable photocatalyst to highly promote visible-light-driven aerobic oxidation of sulfides to sulfoxides. These results not only enrich the COF synthetic methodology but also open a new route to access COFs in a green and sustainable way.

Alkaline Earth Metal-Organic Frameworks Based on Tetratopic Anthraquinone-Based Linkers: Synthesis, Characterization, and Photochemical Applications

A tetratopic bis(diphenylamino)anthraquinone linker is presented, and its physicochemical properties are evaluated. The linker is shown to successfully coordinate alkaline earth metals leading to four new reported metal-organic frameworks (MOFs), which have been fully characterized, including single-crystal X-ray diffraction. The physicochemical and emissive properties of the MOF materials are investigated and compared to those of the uncoordinated ligand. Finally, the catalytic behavior of the ligand and the MOF materials toward the photooxidation of sulfides is described.