Full Spectrum Decomposition of Formic Acid over γ-Mo2N-Based Catalysts: From Dehydration to Dehydrogenation

Synergistic Interplay of a Dual Active Site on a Mo2N@ZrO2 Heterostructure for a Low-Temperature Reverse Water-Gas Shift Reaction

The construction of the active site is pivotal in the design of highly efficient catalysts for heterogeneous catalysis. Notably, the synergy between the two active sites can substantially enhance the catalytic efficiency. Nonetheless, fabricating high-density dual active sites on the catalyst surface remains a significant challenge. In this study, the host-guest strategy was employed to construct a dual active site Mo2N@ZrO2 heterostructure catalyst, featuring a significant number of nitrogen sites and oxygen vacancies. The Mo2N@ZrO2 catalyst exhibited near-equilibrium conversion and 100% CO selectivity in a reverse water-gas shift reaction at 350 °C. Density functional theory (DFT) calculations and in situ diffuse reflection infrared Fourier transform (DRIFT) spectroscopy characterization indicate that oxygen vacancies on the Mo2N@ZrO2 catalyst dissociate CO2 into CO, while Mo2N promotes H2 to form NHx species by heterolytic dissociation. The formation of NHx facilitates the desorption of CO and inhibits the further hydrogenation of CO*. This synergistic effect of the dual active site significantly enhances catalytic performance. This strategy of constructing a dual active site offers valuable insights for developing efficient catalysts.

Carbon Capture and Utilization for Sustainable Supply Chain Design of Intermediate Chemicals: The Formate Factory

Carbon capture and use technologies (CCUt) to valorize industrial flue gases into products is the key to a circular economy. Risks related to technology readiness level (TRL) and supply chain design challenges still lack clarity, however, which might hinder the widespread implementation of CCUt. Industrial decarbonization requires a holistic approach, that includes supply chain design, techno-economic analysis (TEA), and lifecycle assessment (LCA) to drive the transition toward a low-carbon future. Here, formate production with biocatalytic (BR) or electrocatalytic (ER) routes was evaluated as a potential CCU strategy for industrial decarbonization. Electrocatalysis typically had a lower production cost than biocatalysis manufacturing, while the product carbon footprint (PCF) was generally lower for biotechnology. The uncertainty analysis (UA) indicated 58% and 2% probability to reduce emissions below petrochemical emissions with the BR and ER, respectively. Strategies for facilitating the deployment of formate factories, including carbon trading schemes, creating a market for industrial flue gas, and/or producing lower-grade products, were discussed.

Combination of nanoparticles with single-metal sites synergistically boosts co-catalyzed formic acid dehydrogenation

The development of hydrogen technologies is at the heart of a green economy. As prerequisite for implementation of hydrogen storage, active and stable catalysts for (de)hydrogenation reactions are needed. So far, the use of precious metals associated with expensive costs dominates in this area. Herein, we present a new class of lower-cost Co-based catalysts (Co-SAs/NPs@NC) in which highly distributed single-metal sites are synergistically combined with small defined nanoparticles allowing efficient formic acid dehydrogenation. The optimal material with atomically dispersed CoN2C2 units and encapsulated 7-8 nm nanoparticles achieves an excellent gas yield of 1403.8 mL·g-1·h-1 using propylene carbonate as solvent, with no activity loss after 5 cycles, which is 15 times higher than that of the commercial Pd/C. In situ analytic experiments show that Co-SAs/NPs@NC enhances the adsorption and activation of the key intermediate monodentate HCOO*, thereby facilitating the following C-H bond breaking, compared to related single metal atom and nanoparticle catalysts. Theoretical calculations show that the integration of cobalt nanoparticles elevates the d-band center of the Co single atoms as the active center, which consequently enhances the coupling of the carbonyl O of the HCOO* intermediate to the Co centers, thereby lowering the energy barrier.

Floatable Termination-Vacant MXene Architecture for High-Performance and Cost-Effective Photothermal Dehydrogenation

Liquid hydrogen carriers have garnered considerable interest in long-distance and large-scale hydrogen storage owing to their exceptional hydrogen storage density, safety, and compatibility. Nonetheless, their practical application is hampered by the low hydrogen production rate and high cost, stemming from poor thermal utilization and heavy reliance on noble metals in solar bulk dehydrogenation platforms. To conquer these challenges, we devise an economical all-in-one architecture comprising the photothermal catalytic termination-vacant MXene and a highly insulated melamine substrate. This design floats on the air-reactant interface to efficiently drive solar interfacial dehydrogenation. The melamine enables interfacial heat localization to improve the thermal utilization, providing a high reaction temperature. Meanwhile, the MXene with termination vacancies exposes rich active sites for formic acid dehydrogenation, and simultaneously high performance and cost-effectiveness can be realized. This work offers fresh perspectives on the design and application of photothermal catalytic MXene, broadening the prospects for hydrogen storage using liquid hydrogen carriers.

Transition metal nitride catalysts for selective conversion of oxygen-containing molecules

Earth abundant transition metal nitrides (TMNs) are a promising group of catalysts for a wide range of thermocatalytic, electrocatalytic and photocatalytic reactions, with potential to achieve high activity and selectivity while reducing reliance on the use of Pt-group metals. However, current fundamental understanding of the active sites of these materials and the mechanisms by which selective transformations occur is somewhat lacking. Recent investigations of these materials from our group and others have utilized probe molecules, model surfaces, and in situ techniques to elucidate the origin of their activity, strong metal-support interactions, and unique d-band electronic structures. This Perspective discusses three classes of reactions for which TMNs have been used as case studies to highlight how these properties, along with synergistic interactions with metal overlayers, can be exploited to design active, selective and stable TMN catalysts. First, studies of the reactions of C1 molecules will be discussed, specifically highlighting the ability of TMNs to activate CO2. Second, the upgrading of biomass and biomass-derived oxygenates over TMN catalysts will be reviewed. Third, the use of TMNs for H2 production via water electrolysis will be discussed. Finally, we will discuss the challenges and future directions in the study of TMN catalysts, in particular expanding on opportunities to enhance fundamental mechanistic understanding using model surfaces, the elucidation of active centers via in situ techniques, and the development of efficient synthesis methods and design principles.

Fabrication of nitrogen-carbon mediated γ-Mo2N nanocomposite based electrochemical sensor for rapid and sensitive determination of antioxidant 6-PPD in the environment

The rapid and sensitive determination of antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-henylenediamine (6-PPD) in the environment is crucial for early intervention to prevent its adverse effects. Here, a reliable electrochemical sensor based on a N-C mediated γ-Mo2N nanocomposite (γ-Mo2N@N-C) modified carbon paste electrode (CPE) was developed and applied for selective and sensitive determination of 6-PPD. Benefiting from the superior stability and faster electron diffusion coefficient, the peak current responded to 6-PPD on the sensor linearly over a concentration range from 5 × 10-8 mol L-1 to 1.0 × 10-5 mol L-1 with a detection limit of 1.67 × 10-8 mol L-1 (4.48 ng mL-1). Moreover, the sensor maintained good anti-interference ability in the determination of 6-PPD in soil samples from different regions in Zhengzhou City. Furthermore, the density functional theory (DFT) calculations combined with kinetics analysis proved that the enhanced basicity of the γ-Mo2N@N-C facilitated the deprotonation of 6-PPD, with the preferred orientation facet of (200) in γ-Mo2N playing a vital role in inducing the dissociation of 6-PPD, thereby improving the sensor's response. Such an electrochemical sensor, with its good stability and superior sensitivity, has the potential to be applied for real-time evaluation and monitoring of environmental pollutants.

Polyoxometalate-Bridged Synthesis of Superstructured Mesoporous Polymers and Their Derivatives for Sodium-Iodine Batteries

Despite the impressive progress in mesoporous materials over past decades, for those precursors having no well-matched interactions with soft templates, there are still obstacles to be guided for mesoporous structure via soft-template strategies. Here, a polyoxometalate-assisted co-assembly route is proposed for controllable construction of superstructured mesoporous materials by introducing polyoxometalates as bifunctional bridge units, which weakens the self-nucleation tendency of the precursor through coordination interactions and simultaneously connects the template through the induced dipole-dipole interaction. By this strategy, a series of meso-structured polymers, featuring highly open radial mesopores and dendritic pore walls composed of continuous interwoven nanosheets can be facilely obtained. Further carbonization gave rise to nitrogen-doped hierarchical mesoporous carbon decorated uniformly with ultrafine γ-Mo2 N nanoparticles. Density functional theory proves that nitrogen-doped carbon and γ-Mo2 N can strongly adsorb polyiodide ions, which effectively alleviate polyiodide dissolving in organic electrolytes. Thereby, as the cathode materials for sodium-iodine batteries, the I2 -loaded carbonaceous composite shows a high specific capacity (235 mA h g-1 at 0.5 A g-1 ), excellent rate performance, and cycle stability. This work will open a new venue for controllable synthesis of new hierarchical mesoporous functional materials, and thus promote their applications toward diverse fields.

Pd-C Catalytic Thin Films Prepared by Magnetron Sputtering for the Decomposition of Formic Acid

Formic acid is an advantageous liquid organic hydrogen carrier. It is relatively nontoxic and can be synthesized by the reaction of CO₂ with sustainable hydrogen or by biomass decomposition. As an alternative to more widely studied powdery catalysts, supported Pd-C catalytic thin films with controlled nanostructure and compositions were newly prepared in this work by magnetron sputtering on structured supports and tested for the formic acid decomposition reaction. A two-magnetron configuration (carbon and tailored Pd-C targets) was used to achieve a reduction in Pd consumption and high catalyst surface roughness and dispersion by increasing the carbon content. Activity and durability tests were carried out for the gas phase formic acid decomposition reaction on SiC foam monoliths coated with the Pd-C films and the effects of column width, surface roughness and thermal pre-reduction time were investigated. Activity of 5.04 mol_H2·g_Pd^-1·h^-1 and 92% selectivity to the dehydrogenation reaction were achieved at 300 °C for the catalyst with a lower column width and higher carbon content and surface roughness. It was also found that deactivation occurs when Pd is sintered due to the elimination of carbon and/or the segregation and agglomeration of Pd upon cycling. Magnetron sputtering deposition appears as a promising and scalable route for the one-step preparation of Pd-C catalytic films by overcoming the different deposition characteristics of Pd and C with an appropriate experimental design.

Double Active Sites in Co-Nx-C@Co Electrocatalysts for Simultaneous Production of Hydrogen and Carbon Monoxide

The hydrogen evolution reaction (HER) by electrocatalytic water splitting is a prospective and economical route. However, the approach is severely hindered by the sluggish anodic OER, poor reactivity of electrocatalysts, and low-value-added byproducts at the anode. Herein, formaldehyde was added as an anode sacrificial agent, and a bifunctional Co-N_x-C@Co catalyst containing abundant Co-N₄ sites and Co nanoparticles was successfully fabricated and evaluated as both a cathodic and an anodic material for the HER and formaldehyde selective oxidation reaction (FSOR), respectively. Co-N_x-C@Co displayed a remarkable electrocatalytic performance simultaneously for both HER and FSOR with high hydrogen (H₂) and carbon monoxide (CO) selectivity. Density functional theory calculations combined with experiments identified that Co-N₄ and Co nanoparticles were dominating active sites for CO and H₂ generation, respectively. The coupling tactic of FSOR at the anode not only expedites the reaction rate of HER but also offers a high-efficiency and energy-saving means for the generation of valuable H₂/CO syngas.

Recent Developments in Rh Heterogeneous Catalysts

Rh-based catalysts successfully catalyze bond making and bond breaking reactions in most cases [...]

Defect-mediated ab initio thermodynamics of metastable γ-MoN(001)

Refractory transition metal nitrides exhibit a plethora of polymorphic expressions and chemical stoichiometries. To afford a better understanding of how defects may play a role in the structural and thermodynamics of these nitrides, using density-functional theory calculations, we investigate the influence of point and pair defects in bulk metastable γ-MoN and its (001) surface. We report favorable formation of Schottky defect pairs of neighboring Mo and N vacancies in bulk γ-MoN and apply this as a defect-mediated energy correction term to the surface energy of γ-MoN(001) within the ab initio atomistic thermodynamics approach. We also inspect the structural distortions in both bulk and surfaces of γ-MoN by using the partial radial distribution function, g(r), of Mo-N bond lengths. Large atomic displacements are found in both cases, leading to a broad spread of Mo-N bond length values when compared to their idealized bulk values. We propose that these structural and thermodynamic analyses may provide some insight into a better understanding of metastable materials and their surfaces.

The Potassium-Induced Decomposition Pathway of HCOOH on Rh(111)

Formic acid (FA) can be considered both a CO and a H2 carrier via selective dehydration and dehydrogenation pathways, respectively. The two processes can be influenced by the modification of the active components of the catalysts used. In the present study the adsorption of FA and the decomposition of the formed formate intermediate were investigated on potassium promoted Rh(111) surfaces. The preadsorbed potassium markedly increased the uptake of FA at 300 K, and influenced the decomposition of formate depending on the potassium coverage. The work function (Δϕ) is increased by the adsorption of FA on K/Rh(111) at 300 K suggesting a large negative charge on the chemisorbed molecule, which could be probably due to the enhanced back-donation of electrons from the K-promoted Rh into an empty π orbital of HCOOH. The binding energy of the formate species is therefore increased resulting in a greater concentration of irreversibly adsorbed formate species. Decomposition of the formate species led to the formation of H2, CO2, H2O, and CO, which desorbed at significantly higher temperatures from the K-promoted surface than from the K-free one as it was proven by thermal desorption studies. Transformation of surface formate to carbonate (evidenced by UPS) and its decomposition and desorption is responsible for the high temperature CO and CO2 formation.