Mechanism of Chlorine-Mediated Electrochemical Ethylene Oxidation in Saline Water

CoOx clusters-decorated IrO2 electrocatalyst activates NO3- mediator for benzylic C-H activation

Electrochemical conversion of petrochemical-derived hydrocarbons to high-value oxygenates can utilize renewable energy and reduce carbon emissions. However, this involves the challenging activation of inert C(sp3)-H bonds at room temperature. Here, we introduce an electrocatalyst:mediator assembly in which CoOx clusters-decorated IrO2 electrocatalyst activates NO3- mediator to a highly reactive radical capable of abstracting a hydrogen atom from benzylic C-H. The interface between CoOx and IrO2 promotes NO3- activation by facilitating the desorption of NO3● radical for subsequent reaction. Our strategy is demonstrated through the selective oxidation of toluene to benzaldehyde with high Faradaic efficiency of 86( ±1)% at 25 mA/cm2, a factor of >3 times higher than the bare electrocatalyst. The electrocatalyst:mediator assembly is operated stably for 100 h, with minimal decline in performance. When translated into a flow system, a Faradaic efficiency of 60( ±4)% at 200 mA/cm2 was achieved.

V activated electro-epoxidation catalyst in membrane electrode assembly system for the production of propylene oxide

Direct electro-epoxidation of propylene (D-EOPO) with a membrane electrode assembly (MEA) system represents a sustainable approach for producing propylene oxide, which can reduce ohmic losses and simplify product separation. To address the challenges of selectivity and activity, we develop an Ag/V catalyst and integrate it into the "liquid-free" MEA reactor for continues D-EOPO. The V in the catalyst facilitates the formation of Ag-O active centers, thereby reducing the generation energy of *O radicals. Meanwhile, V doping also results in a downshift of the d-band center of the Ag sites. Consequently, the formation of the crucial intermediate (*OC3H6) is significantly accelerated through the coupling *O with adsorbed propylene, thereby markedly improving propylene oxide (PO) production. The MEA reactor, integrated with the developed Ag/V catalyst, can maintain a stable production rate of PO at 227 μmol/h over a period of 78 hours. Thus, the "liquid-free" electro-epoxidation protocol developed here exhibits greater industrial applicability.

Direct Electrooxidation of Ethylene to Ethylene Glycol over 90% Faradaic Efficiency Enabled by Cl- Modification of the Pd Surface

Direct electrochemical ethylene-to-ethylene glycol (C2H4-to-EG) conversion can potentially reduce the consumption of fossil fuels and the emission of carbon dioxide (CO2) compared with the traditional thermo-catalytic approach. Palladium (Pd) prepared by electrodeposition is represented as a promising electrocatalyst; however, it exhibits low Ethylene glycol (EG) current density (<4 mA cm-2), Faradaic efficiency (<60%), and productivity (<10 μmol h-1), hindering practical applications. Herein, we report a nanodendrite palladium catalyst supported on a large-area gas diffusion electrode. This catalyst gives high EG current density (12 mA cm-2) and productivity (227 μmol h-1) but low Faradaic efficiency (65%). With further Cl- ions modification, Faradaic efficiency increased to a record-high value of 92%, and EG current density (18 mA cm-2) and productivity (∼340 μmol h-1) were also promoted. Experimental data suggest that the strong electron-withdrawing feature of Cl- reduces the oxidation ability of in situ generated Pd-OH species, inhibiting EG overoxidation to glycol aldehyde. Meanwhile, Cl- alters EG adsorption configuration─from parallel and dual-site coordination to vertical and single-site coordination─over the Pd surface, thus preventing C-C bond cleavage of EG to CO2. In addition, Cl- adsorption facilitates the generation of Pd-OH active species to improve catalytic activity. This work demonstrates the great potential of surface ion modification for improving activity and selectivity in direct electrochemical C2H4-to-EG conversion, which may have implications for diverse value-added chemicals electrosynthesis.

Advancing Seawater Electrochemical Reaction for Fuel and Chemical Production

As global demand for sustainable chemical processes intensifies, seawater, with its vast availability and rich composition, represents a promising resource for advancing green chemical technologies. Seawater can serve as a feedstock or intermediate for producing fuels and chemicals, including hydrogen, chlorine gas and chloride, sodium, magnesium, and carbon-based compounds through specific electrochemical reactions. While extensive studies have been focused on seawater hydrogen production, systematic exploration of its broader electrochemical reactions remains limited. This review provides a comprehensive overview of current progress in seawater electrochemical reactions, covering its composition, fundamental reaction principles, and existing challenges. Specific examples on the use of seawater to produce fuels and chemicals beyond hydrogen are reviewed, with an emphasis on innovative electrochemical reaction mechanisms, advanced catalyst development, and integrated system designs. Apart from catalyst optimization for existing reactions, we highlight the importance of exploring alternative reactions and scalable systems. Future perspectives focus on expanding research scope, developing efficient catalysts and electrolyzers, testing in real seawater, advancing product separation, and evaluating practical systems to enable sustainable processes for clean fuel and high-value chemical production, supporting global carbon neutrality.

New Redox Chemistries of Halogens in Aqueous Batteries

Halogen-based redox-active materials represent an important class of materials in aqueous electrochemistry. The existence of versatile halogen species and their rich bonding coordination create great flexibility in designing new redox couples. Novel redox reaction mechanisms and electrochemical reversibility can be unlocked in specifically configurated electrolyte environments and electrodes. In this review, the halogen-based redox couples and their appealing redox chemistries in aqueous batteries, including redox flow batteries and traditional static batteries that have been studied in recent years, are discussed. New aqueous electrochemistry provides hope to outperform the state-of-the-art materials and systems that are facing resources and performance limitation, and to enrich the existing battery chemistries.

Electrochemically Driven Selective Olefin Epoxidation by Cobalt-TAML Catalyst

Epoxides are versatile chemical intermediates that are used in the manufacture of diversified industrial products. For decades, thermochemical conversion has long been employed as the primary synthetic route. However, it has several drawbacks, such as harsh and explosive operating conditions, as well as a significant greenhouse gas emissions problem. In this study, we propose an alternative electrocatalytic epoxidation reaction, using [CoIII(TAML)]- (TAML = tetraamido macrocyclic ligand) as a molecular catalyst. Under ambient conditions, the catalyst selectively epoxidized olefin substrates using water as the oxygen atom source, affording an efficient catalytic epoxidation of olefins with a broad substrate scope. Notably, [CoIII(TAML)]- achieved >60% Faradaic efficiency (FE) with >90% selectivity for cyclohexene epoxidation, which other heterogeneous electrocatalysts have never attained. Electrokinetic studies shed further light on the detailed mechanism of olefin epoxidation, which involved a rate-limiting proton-coupled electron transfer process, forming reactive cobalt oxygen active species embedded in 2e-oxidized TAML. Operando voltammetry-electrospray ionization mass spectrometry (VESI-MS) and electron paramagnetic resonance (EPR) analyses were utilized to identify a cobalt oxygen active intermediate during an electrocatalytic epoxidation by [CoIII(TAML)]-. Our findings offer a new possibility for sustainable chemical feedstock production using electrochemical methods.

Atomically Asymmetrical Ir-O-Co Sites Enable Efficient Chloride-Mediated Ethylene Electrooxidation in Neutral Seawater

The chloride-mediated ethylene oxidation reaction (EOR) of ethylene chlorohydrin (ECH) via electrocatalysis is practically attractive because of its sustainability and mild reaction conditions. However, the chlorine oxidation reaction (COR), which is essential for the above process, is commonly catalyzed by dimensionally stable anodes (DSAs) with high contents of precious Ru and/or Ir. The development of highly efficient COR electrocatalysts composed of nonprecious metals or decreased amounts of precious metals is highly desirable. Herein, we report a modified Co3O4 with a single-atom Ir substitution (Ir1/Co3O4) as a highly efficient COR electrocatalyst for chloride-mediated EOR to ECH in neutral seawater. Ir1/Co3O4 achieves a Faradaic efficiency (FE) of up to 94.8 % for ECH generation and remarkable stability. Combining experimental results and density functional theory (DFT) calculations, the unique atomically asymmetrical Ir-O-Co configuration with a strong electron coupling effect in Ir1/Co3O4 can accelerate electron transfer to increase the reaction kinetics and maintain the structural stability of Co3O4 during COR. Moreover, a coupling reaction system integrating the anodic chloride-mediated and cathodic H2O2-mediated EOR show a total FE of ~170 % for paired electrosynthesis of ECH and ethylene glycol (EG) using ethylene as the raw material. The technoeconomic analysis highlights the promising application prospects of this system.

Alkene Epoxidation and Oxygen Evolution Reactions Compete for Reactive Surface Oxygen Atoms on Gold Anodes

Rates and selectivities for the partial oxidation of organic molecules on reactive electrodes depend on the identity and prevalence of reactive and spectator species. Here, we investigate the mechanism for the epoxidation of 1-hexene (C6H12) with reactive oxygen species formed by electrochemical oxidation of water (H2O) on gold (Au) in an aqueous acetonitrile (CH3CN) electrolyte. Cyclic voltammetry measurements demonstrate that oxygen (O2) evolution competes with C6H12 epoxidation, and the Au surface must oxidize before either reaction occurs. In situ Raman spectroscopy reveals reactive oxygen species and spectators (CH3CN) on the active anode as well as species within the electrochemical double layer. The Faradaic efficiencies toward epoxidation and the ratios of epoxide formation to O2 evolution rates increase linearly with the concentration of C6H12 and depend inversely on the concentration of H2O, which agree with analytical expressions that describe rates for reaction between C6H12 and chemisorbed oxygen atoms (O*) and exclude proposals for other forms of reactive oxygen (e.g., O2*, OOH*, OH*). These findings show that the epoxidation and O2 evolution reactions share a set of common steps that form O* through electrochemical H2O activation but then diverge. Subsequently, epoxides form when O* reacts with C6H12 through a non-Faradaic process, whereas O2 evolves when O* reacts with H2O through a Faradaic process to form OOH*, which then deprotonates. These differences lead to distinct changes in rates in response to electrode potential, and hence, disparate Tafel slopes. Collectively, these results provide a self-consistent mechanism for C6H12 epoxidation that involves reactive O*.

Spatial-coupled Ampere-level Electrochemical Propylene Epoxidation over RuO2/Ti Hollow-fiber Penetration Electrodes

The electrochemical propylene epoxidation reaction (PER) provides a promising route for ecofriendly propylene oxide (PO) production, instantly generating active halogen/oxygen species to alleviate chloride contamination inherent in traditional PER. However, the complex processes and unsatisfactory PO yield for current electrochemical PER falls short of meeting industrial application requirements. Herein, a spatial-coupling strategy over RuO2/Ti hollow-fiber penetration electrode (HPE) is adopted to facilitate efficient PO production, significantly improving PER performance to ampere level (achieving over 80 % PO faradaic efficiency and a maximum PO current density of 859 mA cm-2). The synergetic combination of the penetration effect of HPE and the spatial-coupled reaction sequence, enables the realization of ampere-level PO production with high specificity, exhibiting significant potentials for economically viable PER applications.

Universal high-efficiency electrocatalytic olefin epoxidation via a surface-confined radical promotion

Production of epoxides via selective oxidation of olefins affords a fundamental source of key intermediates for the industrial manufacture of diverse chemical stocks and materials. Current oxidation strategy generally works under harsh conditions including high temperature, high pressure, and/or request for potentially hazardous oxidants, leading to substantial challenges in sustainability and energy efficiency. To this end, direct electrocatalytic epoxidation poses as a promising solution to these issues, yet their industrial applications are limited by the low selectivity, low yield, and poor stability of the electrocatalysts. Here we report a universal electrochemical epoxidation approach via a kinetically confined surface radical pathway. High epoxidation efficiency can be achieved under mild working conditions (e.g., >99% selectivity, >80% yield and >80% Faraday efficiency for cyclohexene-to-cyclohexene oxide conversion), which can be extended to broad scope of olefin substrates. The catalytic performance originated from a surface bimolecular (L-H) reaction mechanism involving formation and surface confinement of bromine radicals due to kinetic restriction, which effectively activates inert C=C bonds while avoiding the homogenous radical side reactions. With the use of renewable energy and water as green oxygen source, successful implementation of this approach will pave the way for more sustainable chemical production and manufacturing.

Electrocatalytic water-to-oxygenates conversion: redox-mediated versus direct oxygen transfer

Electrocatalytic oxygenation of hydrocarbons with high selectivity has attracted much attention for its advantages in the sustainable and controllable production of oxygenated compounds with reduced greenhouse gas emissions. Especially when utilizing water as an oxygen source, by constructing a water-to-oxygenates conversion system at the anode, the environment and/or energy costs of producing oxygenated compounds and hydrogen energy can be significantly reduced. There is a broad consensus that the generation and transformation of oxygen species are among the decisive factors determining the overall efficiency of oxygenation reactions. Thus, it is necessary to elucidate the oxygen transfer process to suggest more efficient strategies for electrocatalytic oxygenation. Herein, we introduce oxygen transfer routes through redox-mediated pathways or direct oxygen transfer methods. Especially for the scarcely investigated direct oxygen transfer at the anode, we aim to detail the strategies of catalyst design targeting the efficient oxygen transfer process including activation of organic substrate, generation/adsorption of oxygen species, and transformation of oxygen species for oxygenated compounds. Based on these examples, the significance of balancing the generation and transformation of oxygen species, tuning the states of organic substrates and intermediates, and accelerating electron transfer for organic activation for direct oxygen transfer has been elucidated. Moreover, greener organic synthesis routes through heteroatom transfer and molecular fragment transfer are anticipated beyond oxygen transfer.

Boosting the Faradaic Efficiency of Br--Mediated Photoelectrochemical Epoxidation by Local Acidity on α-Fe2O3

The redox mediated photoelectrochemical (PEC) or electrochemical (EC) alkene oxidation process is a promising method to produce high value-added epoxides. However, due to the competitive reaction of water oxidation and overoxidation of the mediator, the utilization of the electricity is far below the ideal value, where the loss of epoxidation's faradaic efficiency (FE) is ≈50%. In this study, a Br-/HOBr-mediated method is developed to achieve a near-quantitative selectivity and ≈100% FE of styrene oxide on α-Fe2O3, in which low concentration of Br- as mediator and locally generated acidic micro-environment work together to produce the higher active HOBr species. A variety of styrene derivatives are investigated with satisfied epoxidation performance. Based on the analysis of local pH-dependent epoxidation FE and products distribution, the study further verified that HOBr serves as the true active mediator to generate the bromohydrin intermediate. It is believed that this strategy can greatly overcome the limitation of epoxidation FE to enable future industrial applications.

Electrifying oxidation of ethylene and propylene

Ethylene and propylene, as essential precursors in the chemical industry, have been playing a pivotal role in the production of various value-added chemicals that find wide applications in diverse sectors, such as polymer synthesis, lithium-ion battery electrolytes, antifreeze agents and pharmaceuticals. Nevertheless, traditional methods for olefin functionalization including chlorohydrination and epoxidation involve energy-intensive steps and environment-detrimental by-products. In contrast, electrocatalysis is emerging as a promising and sustainable approach for olefin oxidation via utilizing renewable electricity. Recent advancements in energy storage and conversion technologies have intensified the research efforts toward designing efficient electrocatalysts for the selective oxidation of ethylene and propylene, highlighting the shift towards more sustainable production methods. Herein, we summarize recent progress in the electrocatalytic oxidation of ethylene and propylene, focusing on achievement in catalyst design, reaction system selection and mechanism exploration. We figure out the advantages of different oxidation methods for improved performance and discuss the various types of catalysts like noble metals, non-noble metals, metal oxides and carbon-based materials, in facilitating the electrochemical oxidation of ethylene and propylene. Finally, we also provide an overview of current challenges and problems requiring further works.

Boosting Electrocatalytic Ethylene Epoxidation by Single Atom Modulation

The electrochemical synthesis of ethylene oxide (EO) using ethylene and water under ambient conditions presents a low-carbon alternative to existing industrial production process. Yet, the electrocatalytic ethylene epoxidation route is currently hindered by largely insufficient activity, EO selectivity, and long-term stability. Here we report a single atom Ru-doped hollandite structure KIr4O8 (KIrRuO) nanowire catalyst for efficient EO production via a chloride-mediated ethylene epoxidation process. The KIrRuO catalyst exhibits an EO partial current density up to 0.7 A cm-2 and an EO yield as high as 92.0 %. The impressive electrocatalytic performance towards ethylene epoxidation is ascribed to the modulation of electronic structures of adjacent Ir sites by single Ru atoms, which stabilizes the *CH2CH2OH intermediate and facilitates the formation of active Cl2 species during the generation of 2-chloroethanol, the precursor of EO. This work provides a single atom modulation strategy for improving the reactivity of adjacent metal sites in heterogeneous electrocatalysts.

Spatial decoupling of bromide-mediated process boosts propylene oxide electrosynthesis

The electrochemical synthesis of propylene oxide is far from practical application due to the limited performance (including activity, stability, and selectivity). In this work, we spatially decouple the bromide-mediated process to avoid direct contact between the anode and propylene, where bromine is generated at the anode and then transferred into an independent reactor to react with propylene. This strategy effectively prevents the side reactions and eliminates the interference to stability caused by massive alkene input and vigorously stirred electrolytes. As expected, the selectivity for propylene oxide reaches above 99.9% with a remarkable Faradaic efficiency of 91% and stability of 750-h (>30 days). When the electrode area is scaled up to 25 cm2, 262 g of pure propylene oxide is obtained after 50-h continuous electrolysis at 6.25 A. These findings demonstrate that the electrochemical bromohydrin route represents a viable alternative for the manufacture of epoxides.

Energy-Efficient Electrosynthesis of High Value-Added Active Chlorine Coupled with H2 Generation from Direct Seawater Electrolysis through Decoupling Electrolytes

Direct saline (seawater) electrolysis is a well-recognized system to generate active chlorine species for the chloride-mediated electrosynthesis, environmental remediation and sterilization over the past few decades. However, the large energy consumption originated from the high cell voltage of traditional direct saline electrolysis system, greatly restricts its practical application. Here, we report an acid-saline hybrid electrolysis system for energy-saving co-electrosynthesis of active chlorine and H2. We demonstrate that this system just requires a low cell voltage of 1.59 V to attain 10 mA cm-2 with a large energy consumption decrease of 27.7 % compared to direct saline electrolysis system (2.20 V). We further demonstrate that such acid-saline hybrid electrolysis system could be extended to realize energy-saving and sustainable seawater electrolysis. The acidified seawater in this system can absolutely avoid the formation of Ca/Mg-based sediments that always form in the seawater electrolysis system. We also prove that this system in the half-flow mode can realize real-time preparation of active chlorine used for sterilization and pea sprout production.

Influence of electric double layer rigidity on CO adsorption and electroreduction rate

Understanding the structure of the electric double layer (EDL) is critical for designing efficient electrocatalytic processes. However, the interplay between reactant adsorbates and the concentrated ionic species within the EDL remains an aspect that has yet to be fully explored. In the present study, we employ electrochemical CO reduction on Cu as a model reaction to reveal the significant impact of EDL structure on CO adsorption. By altering the sequence of applying negative potential and elevating CO pressure, we discern two distinct EDL structures with varying cation density and CO coverage. Our findings demonstrate that the EDL comprising densely packed cations substantially hinders CO adsorption on the Cu as opposed to the EDL containing less compact cations. These two different EDL structures remained stable over the course of our experiments, despite their identical initial and final conditions, suggesting an insurmountable kinetic barrier present in between. Moreover, we show that the size and identity of cations play decisive roles in determining the properties of the EDL in CO electroreduction on Cu. This study presents a refined adaptation of the classical Gouy-Chapman-Stern model and highlights its catalytic importance, which bridges the mechanistic gap between the EDL structure and cathodic reactions.

A controlled non-radical chlorine activation pathway on hematite photoanodes for efficient oxidative chlorination reactions

Photo(electro)catalytic chlorine oxidation has emerged as a useful method for chemical transformation and environmental remediation. However, the reaction selectivity usually remains low due to the high activity and non-selectivity characteristics of free chlorine radicals. In this study, we report a photoelectrochemical (PEC) strategy for achieving controlled non-radical chlorine activation on hematite (α-Fe2O3) photoanodes. High selectivity (up to 99%) and faradaic efficiency (up to 90%) are achieved for the chlorination of a wide range of aromatic compounds and alkenes by using NaCl as the chlorine source, which is distinct from conventional TiO2 photoanodes. A comprehensive PEC study verifies a non-radical "Cl+" formation pathway, which is facilitated by the accumulation of surface-trapped holes on α-Fe2O3 surfaces. The new understanding of the non-radical Cl- activation by semiconductor photoelectrochemistry is expected to provide guidance for conducting selective chlorine atom transfer reactions.

Direct propylene epoxidation via water activation over Pd-Pt electrocatalysts

Direct electrochemical propylene epoxidation by means of water-oxidation intermediates presents a sustainable alternative to existing routes that involve hazardous chlorine or peroxide reagents. We report an oxidized palladium-platinum alloy catalyst (PdPtOx/C), which reaches a Faradaic efficiency of 66 ± 5% toward propylene epoxidation at 50 milliamperes per square centimeter at ambient temperature and pressure. Embedding platinum into the palladium oxide crystal structure stabilized oxidized platinum species, resulting in improved catalyst performance. The reaction kinetics suggest that epoxidation on PdPtOx/C proceeds through electrophilic attack by metal-bound peroxo intermediates. This work demonstrates an effective strategy for selective electrochemical oxygen-atom transfer from water, without mediators, for diverse oxygenation reactions.

Recent Advances in Hybrid Seawater Electrolysis for Hydrogen Production

Seawater electrolysis (SWE) is a promising and potentially cost-effective approach to hydrogen production, considering that seawater is vastly abundant and SWE is able to combine with offshore renewables producing green hydrogen. However, SWE has long been suffering from technical challenges including the high energy demand and interference of chlorine chemistry, leading electrolyzers to a low efficiency and short lifespan. In this context, hybrid SWE, operated by replacing the energy-demanding oxygen evolution reaction and interfering chlorine evolution reaction (CER) with a thermodynamically more favorable anodic oxidation reaction (AOR) or by designing innovative electrolyzer cells, has recently emerged as a better alternative, which not only allows SWE to occur in a safe and energy-saving manner without the notorious CER, but also enables co-production of value-added chemicals or elimination of environmental pollutants. This review provides a first account of recent advances in hybrid SWE for hydrogen production. The substitutional AOR of various small molecules or redox mediators, in couple with hydrogen evolution from seawater, is comprehensively summarized. Moreover, how the electrolyzer cell design helps in hybrid SWE is briefly discussed. Last, the current challenges and future outlook about the development of the hybrid SWE technology are outlined.

Electrochemical Epoxidation of Propylene to Propylene Oxide via Halogen-Mediated Systems

As one of the most important derivatives of propylene, the production of propylene oxide (PO) is severely restricted. The traditional chlorohydrin process is being eliminated due to environmental concerns, while processes such as Halcon and hydrogen peroxide epoxidation are limited by cost and efficiency, making it difficult to meet market demand. Therefore, achieving PO production through clean and efficient technologies has received extensive attention, and halogen-mediated electrochemical epoxidation of alkene is considered to be a desirable technology for the production of alkylene oxide. In this work, we used electrochemical methods to synthesize PO in halogen-mediated systems based on a RuO2-loaded Ti (RuO2/Ti) anode and screened out two potential mediated systems of chlorine (Cl) and bromine (Br) for the electrosynthesis of PO. At a current density of 100 mA·cm-2, both Cl- and Br-mediated systems delivered PO Faradaic efficiencies of more than 80%. In particular, the Br-mediated system obtained PO Faradaic efficiencies of more than 90% at lower potentials (≤1.5 V vs RHE) with better electrode structure durability. Furthermore, detailed product distribution investigations and DFT calculations suggested hypohalous acid molecules as key reaction intermediates in both Cl- and Br-mediated systems. This work presents a green and efficient PO production route with halogen-mediated electrochemical epoxidation of propylene driven by renewable electricity, exhibiting promising potential to replace the traditional chlorohydrin process.

Bromine-Enhanced Generation and Epoxidation of Ethylene in Tandem CO2 Electrolysis Towards Ethylene Oxide

The indirect electro-epoxidation of ethylene (C2 H4 ), produced from CO2 electroreduction (CO2 R), holds immense promise for CO2 upcycling to valuable ethylene oxide (EO). However, this process currently has a mediocre Faradaic efficiency (FE) due to sluggish formation and rapid dissociation of active species, as well as reductive deactivation of Cu-based electrocatalysts during the conversion of C2 H4 to EO and CO2 to C2 H4 , respectively. Herein, we report a bromine-induced dual-enhancement strategy designed to concurrently promote both C2 H4 -to-EO and CO2 -to-C2 H4 conversions, thereby improving EO generation, using single-atom Pt on N-doped CNTs (Pt1 /NCNT) and Br- -bearing porous Cu2 O as anode and cathode electrocatalysts, respectively. Physicochemical characterizations including synchrotron X-ray absorption, operando infrared spectroscopy, and quasi in situ Raman spectroscopy/electron paramagnetic resonance with theoretical calculations reveal that the favorable Br2 /HBrO generation over Pt1 /NCNT with optimal intermediate binding facilitates C2 H4 -to-EO conversion with a high FE of 92.2 %, and concomitantly, the Br- with strong nucleophilicity protects active Cu+ species in Cu2 O effectively for improved CO2 -to-C2 H4 conversion with a FE of 66.9 % at 800 mA cm-2 , superior to those in the traditional chloride-mediated case. Consequently, a single-pass FE as high as 41.1 % for CO2 -to-EO conversion can be achieved in a tandem system.

Br-/BrO--mediated highly efficient photoelectrochemical epoxidation of alkenes on α-Fe2O3

Epoxides are significant intermediates for the manufacture of pharmaceuticals and epoxy resins. In this study, we develop a Br^-/BrO^- mediated photoelectrochemical epoxidation system on α-Fe₂O₃. High selectivity (up to >99%) and faradaic efficiency (up to 82 ± 4%) for the epoxidation of a wide range of alkenes are achieved, with water as oxygen source, which are far beyond the most reported electrochemical and photoelectrochemical epoxidation performances. Further, we can verify that the epoxidation reaction is mediated by Br^-/BrO^- route, in which Br^- is oxidized non-radically to BrO^- by an oxygen atom transfer pathway on α-Fe₂O₃, and the formed BrO^- in turn transfers its oxygen atom to the alkenes. The non-radical mediated characteristic and the favorable thermodynamics of the oxygen atom transfer process make the epoxidation reactions very efficient. We believe that this photoelectrochemical Br^-/BrO^--mediated epoxidation provides a promising strategy for value-added production of epoxides and hydrogen.

Tuning Single-Atom Dopants on Manganese Oxide for Selective Electrocatalytic Cyclooctene Epoxidation

Selective and efficient electrocatalysts are imperative for the successful deployment of electrochemistry toward synthetic applications. In this study, we used galvanic replacement reactions to synthesize iridium-decorated manganese oxide nanoparticles, which showed a cyclooctene epoxidation partial current density of 10.5 ± 2.8 mA/cm² and a Faradaic efficiency of 46 ± 4%. Results from operando X-ray absorption spectroscopy suggest that manganese leaching from the nanoparticles during galvanic replacement introduces lattice vacancies that make the nanoparticles more susceptible to metal oxidation and catalyst reconstruction under an applied anodic potential. This results in an increased presence of electrophilic oxygen atoms on the catalyst surface during reaction conditions, which may contribute to the enhanced electrocatalytic activity toward cyclooctene epoxidation.

Bromine and oxygen redox species mediated highly selective electro-epoxidation of styrene

Olefin epoxidation is an essential transformation and arouses great interest among the scientific community for the key role of epoxide in the chemical industry.

Water oxidation by Brønsted acid-catalyzed in situ generated thiol cation: dual function of the acid catalyst leading to transition metal-free substitution and addition reactions of S-S bonds

An unprecedented water oxidation reaction by a small organic molecule, i.e., the thiol cation generated in situ by Brønsted acid-catalyzed heterolytic cleavage of S-S bond of a disulfide, is observed...

Selective Chloride-Mediated Neat Ethanol Oxidation to 1,1-Diethoxyethane via an Electrochemically Generated Ethyl Hypochlorite Intermediate

Selective primary alcohol oxidation to form aldehydes products without overoxidation to carboxylic acids remains a key chemistry challenge. Using simple alkylammonium chloride as the electrolyte with a glassy carbon working electrode in neat ethanol solvent, 1,1-diethoxyethane (DEE) was prepared with >95% faradaic efficiency (FE). DEE serves as a storage platform protecting acetaldehyde from overoxidation and volatilization. UV-vis spectroscopy shows that the reaction proceeds through an ethyl hypochlorite intermediate as the sole chloride oxidation product, and that this intermediate decomposes unimolecularly (rate constant k = (6.896 ± 0.516) × 10^-4 s^-1) to form HCl catalyst and acetaldehyde, which undergoes rapid nucleophilic attack by ethanol solvent to form the DEE product. This indirect oxidation mechanism enables ethanol oxidation at much less positive potentials due to the fast kinetics for chloride anion oxidation.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

The Lord of the Chemical Rings: Catalytic Synthesis of Important Industrial Epoxide Compounds

The epoxidized group, also known as the oxirane group, can be considered as one of the most crucial rings in chemistry. Due to the high ring strain and the polarization of the C–O bond in this three-membered ring, several reactions can be carried out. One can see such a functional group as a crucial intermediate in fuels, polymers, materials, fine chemistry, etc. Literature covering the topic of epoxidation, including the catalytic aspect, is vast. No review articles have been written on the catalytic synthesis of short size, intermediate and macro-molecules to the best of our knowledge. To fill this gap, this manuscript reviews the main catalytic findings for the production of ethylene and propylene oxides, epichlorohydrin and epoxidized vegetable oil. We have selected these three epoxidized molecules because they are the most studied and produced. The following catalytic systems will be considered: homogeneous, heterogeneous and enzymatic catalysis.