Positive Charge Introduction on the Surface of Thermostabilized PET Hydrolase Facilitates PET Binding and Degradation

Current state and sustainable management of waste polyethylene terephthalate bio-disposal: enzymatic degradation to upcycling

Poly (ethylene terephthalate) (PET) is a widely used plastic that leads to significant environmental pollution due to its durability. Enzymatic degradation of PET presents an eco-friendly disposal approach, with potential scalability for industrial applications. This review examines key crucial factors influencing PET enzymatic degradation, including the catalytic efficiency of PET hydrolase, production scalability of PET hydrolase, and recyclability of degraded PET. We outline major advancements in PET hydrolase development, including discovery techniques, functional enhancement strategies, and degradation optimization. Additionally, it assesses the preparation methodologies for PET hydrolase, covering bacterial expression systems, high-density fermentation technologies, and approaches for sustainable catalytic use. The review also discusses upcycling processes for PET hydrolysates, focusing on repolymerization into new plastics or bioconversion into valuable chemicals. Successful achievement of waste PET bio-disposal in industrial-scale n hinges on balancing degradation costs with revenue from upcycling products. Aim at this target, the review further points out the critical challenges, and proposes targeted solutions and expectations.

Selective Hydrolysis by Engineered Cutinases: Characterization of Aliphatic-Aromatic Homo and Co-Polyesters by LC and LC-MS Methods

The performance, biodegradability, and recyclability of polymers can be tuned during synthesis by adopting monomers with different chemical characteristics. Recent research has shown the aptness of some hydrolases to depolymerize polyesters under mild conditions compared to chemical approaches. Herein, we engineered a cutinase from Thermobifida cellulosilytica (Tc_Cut2NVWCCG) for improved thermostability (up to 91 °C) and compared it with previously reported leaf-branch compost cutinase (LCCWCCG) for the hydrolysis of low molar mass substrates, as well as aliphatic and aromatic homo- and co-polyesters. For both enzymes, higher hydrolysis rates were observed for aliphatic compared to aromatic homo-polyesters. SEC-MS analysis revealed that the hydrolysis of aliphatic/aromatic co-polyesters occurred at the aliphatic monomers, significantly reducing the molecular weight and changing the end-group composition. These results underline the importance of co-polymer composition in the biodegradation of co-polymer systems and demonstrate the applicability of enzymes for the analytical characterization of synthetic polymers by selectively reducing their molecular weight. Finally, the discovery and engineering of highly active enzymes that can efficiently hydrolyze a wide variety of synthetic polyesters create new opportunities for their efficient recycling under mild conditions.

Selective Modification of the Product Profile of Biocatalytic Hydrolyzed PET via Product-Specific Medium Engineering

Over the past years, enzymatic depolymerization of PET, one of the most widely used plastics worldwide, has become very efficient leading to the end products terephthalic acid (TPA) and ethylene glycol (EG) used for PET re-synthesis. Potent alternatives to these monomers are the intermediates BHET and MHET, the mono- and di-esters of TPA and EG which avoid total hydrolysis and can serve as single starting materials for direct re-polymerization. This study therefore aimed to selectively prepare those intermediates through reaction medium engineering during the biocatalytic hydrolysis of PET. After a comparative pre-screening of 12 PET-hydrolyzing enzymes, two of them (LCCICCG, IsPETasewt) were chosen for detailed investigations. Depending on the reaction conditions, MHET and BHET are predominantly obtainable: (i) MHET was produced in a better ratio and high concentrations at the beginning of the reaction when IsPETasewt and 10 % EG was used; (ii) BHET was produced as predominant product when LCCICCG and 25 % EG was used. TPA itself was nearly the single product at pH 9.0 after 24 h due to the self-hydrolysis of MHET and BHET under basic conditions. Using medium engineering in biocatalytic PET-hydrolysis, the product profile can be adjusted so that TPA, MHET or BHET is predominantly produced.

Unusual depolymerization mechanism of Poly(ethylene terephthalate) by hydrolase 202

Polyethylene terephthalate (PET) waste significantly contributes to the global plastic crisis, but enzymatic conversion has become an efficient and environmentally friendly strategy to combat it. Therefore, this study explored the Re-face selective depolymerization mechanisms of a novel PET-degradation peptidase, hydrolase 202. Theoretical calculations revealed that the first step, a catalytic triad-assisted nucleophilic attack, is the rate-determining step. The corresponding Boltzmann-weighted average barrier was 21.6 kcal/mol. Furthermore, hydrolase 202 degraded Re-face PET more effectively than FAST-PETase, whereas other reported PET hydrolases (e.g., FAST-PETase) degraded Si-face PET more effectively. The hydrogen bond network significantly influenced the depolymerization efficiency. We also identified correlations between 24 important structural and charge features and energy barriers. Key charge, distance, and angle features were responsible for the superiority of the Re-face depolymerization. Finally, we identified residues that may affect the depolymerization efficiency of hydrolase 202, such as Glu215. These findings offer new insights into the potential engineering of PETases and may enhance enzymatic PET waste recycling.

Structure-guided discovery and rational design of a new poly(ethylene terephthalate) hydrolase from AlphaFold protein structure database

Enzymatic degradation offers a promising eco-friendly solution to plastic pollution, especially for polyethylene terephthalate (PET). Current efforts have focused on screening PET-degrading enzymes from microbial and metagenomic sources and obtaining superior candidates with a limited set of templates. More efficient PET hydrolases are required for PET-waste biorefinery. Here, using a structure-guided bioinformatic workflow, we identified a novel PET hydrolase, LSPET4, from Micromonospora sp. HM5-17, by screening the AlphaFold protein structure database. LSPET4 features a unique carbohydrate-binding module (CBM) and a distinctive linear substrate binding conformation. The intrinsic CBM in LSPET4 exhibited superior binding ability on PET surfaces and enhanced PET hydrolysis performance compared to the previously reported most effective CBM3. Through rational protein engineering focused on stabilizing and modifying the linear substrate binding conformation, we developed LSPET4M6 (D130P, N127F, Y96F, Q209E, A238K, D241S), a variant that achieved a 38.79-fold improvement in activity compared to the wild type, and was comparable to the reported most effective PET hydrolase derived from IsPETase, FAST-PETase at 45 ℃. This variant also demonstrated effectiveness in degrading various commercial PET materials, including PET food sealing films, PET strawberry boxes, and PET tomato boxes used in the food industry. This study not only provides a new template for protein engineering endeavors to create efficient biocatalysts for PET recycling but also offers an effective enzyme discovery approach to uncover enzymes of interest from the AlphaFold protein structure database.

Comprehensive Understanding of Laboratory Evolution for Food Enzymes: From Design to Screening Innovations

In the field of food processing, enzymes play a pivotal role in improving product quality and flavor, and extending shelf life. However, the exposure of traditional food enzymes to high temperatures during processing often leads to a decrease in activity or even inactivation, limiting the effectiveness of their application under high-temperature conditions. Therefore, the modification of thermostability and activity of enzymes to adapt to extreme conditions through protein engineering has become a key way to improve the efficiency and economic benefits of industrial production. Directed evolution and semirational design strategies in the laboratory have proven to be broadly applicable frameworks for biochemical researchers in the food field, including those who are beginners. In this review, we systematically summarize semirational design strategies and high-throughput screening strategies, and introduce some intuitive computer simulation software to improve the thermostability and enzyme activity of food enzymes. The application of these strategies and techniques provides a comprehensive guide for the optimization of food enzymes. In addition, the latest hot topics of genetically engineered food enzymes in the field of application are discussed.

From Bulk to Binding: Decoding the Entry of PET into Hydrolase Binding Pockets

Plastic-degrading enzymes facilitate the biocatalytic recycling of poly(ethylene terephthalate) (PET), a significant synthetic polymer, and substantial progress has been made in utilizing PET hydrolases for industrial applications. To fully exploit the potential of these enzymes, a deeper mechanistic understanding followed by targeted protein engineering is essential. Through advanced molecular dynamics simulations and free energy analysis methods, we elucidated the complete pathway from the initial binding of two PET hydrolases-the thermophilic leaf-branch compost cutinase (LCC) and polyester hydrolase 1 (PES-H1)-to an amorphous PET substrate, ultimately leading to a PET chain entering the active site in a hydrolyzable conformation. Our findings indicate that initial PET binding is nonspecific and driven by polar and hydrophobic interactions. We demonstrate that the subsequent entry of PET into the active site can occur via one of three key pathways, identifying barriers related to both PET-PET and PET-enzyme interactions, as well as specific residues highlighted through in silico and in vitro mutagenesis. These insights not only enhance our understanding of the mechanisms underlying PET degradation and facilitate the development of targeted enzyme enhancement strategies but also provide a novel framework applicable to enzyme studies across various disciplines.

Enhancement of the degradation capacity of IsPETase by acidic amino acids insertion and carbohydrate-binding module fusion

The biocatalytic degradation of poly(ethylene terephthalate) (PET) through enzymatic methods has garnered considerable attention due to its environmentally friendly and non-polluting nature, as well as its high specificity. While previous efforts in enhancing IsPETase performance have focused on amino acid substitutions in protein engineering, we introduced an amino acid insertion strategy in this work. By inserting a negatively charged acidic amino acid, Glu, at the right-angle bend of IsPETase, the binding capability between the enzyme's active pocket and PET was improved. The resulted mutant IsPETase9394insE exhibited enhanced hydrolytic activity towards PET at various temperatures ranging from 30 to 45 ℃ compared with the wild-type IsPETase. Notably, a 10.04-fold increase was observed at 45 ℃. To further enhance PET hydrolysis, different carbohydrate-binding modules (CBMs) were incorporated at the C-terminus of IsPETase9394insE. Among these, the fusion of CBM from Verrucosispora sioxanthis exhibited the highest enhancement, resulting in a 1.82-fold increase in PET hydrolytic activity at 37 ℃ compared with the IsPETase9394insE. Finally, the engineered variant was successfully employed for the degradation of polyester filter cloth, demonstrating its promising hydrolytic capacity. In conclusion, this research presents an alternative enzyme engineering strategy for modifying PETases and enriches the pool of potential candidates for industrial PET degradation.

Direct Screening of PET Hydrolase Activity in Culture Medium Based on Turbidity Reduction

The development of an efficient screening method for the activity of PET-degrading enzymes represents a significant technological advance in the field of enzyme research, with the potential to facilitate the advancement of enzymes for PET recycling. By examining the stable conditions of PET suspension and enzyme production conditions, we developed a method to quantify PET-degrading enzyme activity in E. coli culture medium using turbidity reduction as an indicator. High PET concentration or ionic strength caused aggregation of PET, and the best condition for activity detection was 0.5 mg mL-1 PET in 50 mM sodium phosphate pH 7.0. Preculture of E. coli increased the purity of enzyme secreted in medium. To evaluate the screening method, 720 colonies of the PET2-7M-H229X-F233X mutant library were analyzed and three candidates of high-activity mutants were obtained. The thermostability of the mutants could also be easily measured by measuring the residual activity after heat treatment. The H229T-F233M mutant showed 3.4 times higher degradation rate against PET film than the template enzyme at the initial time. The molecular dynamics simulation implied that the F233M mutation makes space for making an α helix and that the H229T mutation resolved the steric hindrance with Trp199. These mutations were speculated to change the angle of the Trp199 side chain of PET2 to an angle similar to that of the Trp185 of IsPETase, making it suitable for PET binding to the active center. Screening of activity using PET suspensions is compatible with robotic automation and is expected to be useful for validating computationally predicted mutations.

Biochemical Characterisation of Sis: A Distinct Thermophilic PETase with Enhanced NanoPET Substrate Hydrolysis and Thermal Stability

Polyethylene terephthalate (PET) degradation by enzymatic hydrolysis is significant for addressing plastic pollution and fostering sustainable waste management practices. Identifying thermophilic and thermostable PET hydrolases is particularly crucial for industrial bioprocesses, where elevated temperatures may enhance enzymatic efficiency and process kinetics. In this study, we present the discovery of a novel thermophilic and thermostable PETase enzyme named Sis, obtained through metagenomic sequence-based analysis. Sis exhibits robust activity on nanoPET substrates, demonstrating effectiveness at temperatures up to 70 °C and displaying exceptional thermal stability with a melting temperature (Tm) of 82 °C. Phylogenetically distinct from previously characterised PET hydrolases, Sis represents a valuable addition to the repertoire of enzymes suitable for PET degradation.

Unveiling potential PET degrading eukaryotes through in silico bioprospecting of PETases

This study addresses the environmental problem of PET plastic through in silico bioprospecting for the identification and experimental validation of novel PET degrading eukaryotes through the in silico bioprospectingI of PETases, employing a methodology that combines Hidden Markov Models (HMMs), clustering techniques, molecular docking, and dynamic simulations. A total of 424 putative PETase sequences were identified from 219 eukaryotic organisms, highlighting six sequences with low affinity energies. The Aspergillus luchuensis sequence showed the lowest Gibbs free energy and exhibited stability at different temperatures in molecular dynamics assays. Experimental validation, through a plate clearance assay and HPLC, confirmed PETase activity in three wild-type fungal strains, with A. luchuensis showing the highest efficiency. The results obtained demonstrate the effectiveness of combining computational and experimental approaches as proof of concept to discover and validate eukaryotes with PET-degrading capabilities opening new perspectives for the sustainable management of this type of waste and contributing to its environmental mitigation.

Development and characterization of a bacterial enzyme cascade reaction system for efficient and stable PET degradation

The widespread use of polyethylene terephthalate (PET) in various industries has led to a surge in microplastics (MPs) pollution, posing a significant threat to ecosystems and human health. To address this, we have developed a bacterial enzyme cascade reaction system (BECRS) that focuses on the efficient degradation of PET. This system harnesses the Escherichia coli (E. coli) surface to display CsgA protein, which forms curli fibers, along with the carbohydrate-binding module 3 (CBM3) and PETases, to enhance the adsorption and degradation of PET. The study demonstrated that the BECRS achieved a notable PET film degradation rate of 3437 ± 148 μg/(d*cm²), with a degradation efficiency of 21.40% for crystalline PET MPs, and the degradation products were all converted to TPA. The stability of the system was evidenced by retaining over 80% of its original activity after multiple uses and during one month of storage. Molecular dynamics simulations confirmed that the presence of CsgA did not interfere with the enzymatic activity of PETases. This BECRS represents a significant step forward in the biodegradation of PET, particularly microplastics, offering a practical and sustainable solution for environmental pollution control.

Engineered polyethylene terephthalate hydrolases: perspectives and limits

Polyethylene terephthalate (PET) is a major component of plastic waste. Enzymatic PET hydrolysis is the most ecofriendly recycling technology. The biorecycling of PET waste requires the complete depolymerization of PET to terephthalate and ethylene glycol. The history of enzymatic PET depolymerization has revealed two critical issues for the industrial depolymerization of PET: industrially available PET hydrolases and pretreatment of PET waste to make it susceptible to full enzymatic hydrolysis. As none of the wild-type enzymes can satisfy the requirements for industrialization, various mutational improvements have been performed, through classical technology to state-of-the-art computational/machine-learning technology. Recent engineering studies on PET hydrolases have brought a new insight that flexibility of the substrate-binding groove may improve the efficiency of PET hydrolysis while maintaining sufficient thermostability, although the previous studies focused only on enzymatic thermostability above the glass transition temperature of PET. Industrial biorecycling of PET waste is scheduled to be implemented, using micronized amorphous PET. Next stage must be the development of PET hydrolases that can efficiently degrade crystalline parts of PET and expansion of target PET materials, not only bottles but also textiles, packages, and microplastics. This review discusses the current status of PET hydrolases, their potential applications, and their profespectal goals. KEY POINTS: • PET hydrolases must be thermophilic, but their operation must be below 70 °C • Classical and state-of-the-art engineering approaches are useful for PET hydrolases • Enzyme activity on crystalline PET is most expected for future PET biorecycling.

The Impact of Metagenomics on Biocatalysis

In the ever-growing demand for sustainable ways to produce high-value small molecules, biocatalysis has come to the forefront of greener routes to these chemicals. As such, the need to constantly find and optimise suitable biocatalysts for specific transformations has never been greater. Metagenome mining has been shown to rapidly expand the toolkit of promiscuous enzymes needed for new transformations, without requiring protein engineering steps. If protein engineering is needed, the metagenomic candidate can often provide a better starting point for engineering than a previously discovered enzyme on the open database or from literature, for instance. In this review, we highlight where metagenomics has made substantial impact on the area of biocatalysis in recent years. We review the discovery of enzymes in previously unexplored or 'hidden' sequence space, leading to the characterisation of enzymes with enhanced properties that originate from natural selection pressures in native environments.

Recent advances in microbial and enzymatic engineering for the biodegradation of micro- and nanoplastics

This review examines the escalating issue of plastic pollution, specifically highlighting the detrimental effects on the environment and human health caused by microplastics and nanoplastics. The extensive use of synthetic polymers such as polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) has raised significant environmental concerns because of their long-lasting and non-degradable characteristics. This review delves into the role of enzymatic and microbial strategies in breaking down these polymers, showcasing recent advancements in the field. The intricacies of enzymatic degradation are thoroughly examined, including the effectiveness of enzymes such as PETase and MHETase, as well as the contribution of microbial pathways in breaking down resilient polymers into more benign substances. The paper also discusses the impact of chemical composition on plastic degradation kinetics and emphasizes the need for an approach to managing the environmental impact of synthetic polymers. The review highlights the significance of comprehending the physical characteristics and long-term impacts of micro- and nanoplastics in different ecosystems. Furthermore, it points out the environmental and health consequences of these contaminants, such as their ability to cause cancer and interfere with the endocrine system. The paper emphasizes the need for advanced analytical methods and effective strategies for enzymatic degradation, as well as continued research and development in this area. This review highlights the crucial role of enzymatic and microbial strategies in addressing plastic pollution and proposes methods to create effective and environmentally friendly solutions.

Characterization and engineering of plastic-degrading polyesterases jmPE13 and jmPE14 from Pseudomonas bacterium

Polyester plastics are widely used in daily life, but also cause a large amount of waste. Degradation by microbial enzymes is the most promising way for the biobased upcycling of the wastes. However, there is still a shortage of high-performance enzymes, and more efficient polyester hydrolases need to be developed. Here we identified two polyester hydrolases, jmPE13 and jmPE14, from a previously isolated strain Pseudomonas sp. JM16B3. The proteins were recombinantly expressed and purified in E. coli, and their enzymatic properties were characterized. JmPE13 and jmPE14 showed hydrolytic activity towards polyethylene terephthalate (PET) and Poly (butylene adipate-co-terephthalate) (PBAT) at medium temperatures. The enzyme activity and stability of jmPE13 were further improved to 3- and 1.5-fold, respectively, by rational design. The results of our research can be helpful for further engineering of more efficient polyester plastic hydrolases and their industrial applications.

Recent Advances and Challenges in Enzymatic Depolymerization and Recycling of PET Wastes

Poly (ethylene terephthalate) (PET) is one of the most commonly used plastics in daily life and various industries. Enzymatic depolymerization and recycling of post-consumer PET (pc-PET) provides a promising strategy for the sustainable circular economy of polymers. Great protein engineering efforts have been devoted to improving the depolymerization performance of PET hydrolytic enzymes (PHEs). In this review, we first discuss the mechanisms and challenges of enzymatic PET depolymerization. Subsequently, we summarize the state-of-the-art engineering of PHEs including rational design, machine learning, and directed evolution for improved depolymerization performance, and highlight the advances in screening methods of PHEs. We further discuss several factors that affect the enzymatic depolymerization efficiency. We conclude with our perspective on the opportunities and challenges in bio-recycling and bio-upcycling of PET wastes.

Improvement of the fibrinolytic activity, acid resistance and thermostability of nattokinase by surface charge engineering

Nattokinase is a promising thrombolytic drug due to its powerful fibrinolytic effect and few side effects. However, the low fibrinolytic activity and stability of nattokinase have limited its industrial production and oral application. In this study, the basic and neutral amino acid residues on the surface of recombinant nattokinase AprY from Bacillus mojavensis LY-06 (rAprY) were mutated to acidic amino acid residues by surface charge engineering strategy, and two variants K12D and N109D with 92.6 % and 8.4 % increased fibrinolytic activity were obtained. The R45E variant with enhanced acid stability and thermostability was also screened, its acid stability at pH 4 and t1/2 at 55 °C were 3.7-fold and 1.8-fold higher than that of wild type rAprY, respectively. Bioinformatics analysis showed that the increased activities of K12D and N109D variants were related to the increased flexibility of the region around their active centers. The increased rigidity of 97-103 amino acid residues around the active center of R45E may be the reason for its enhanced stability and reduced catalytic activity. The multipoint mutation K12D-N109D (M2)'s catalytic activity did not increase cumulatively, but its pH stability did. The nattokinase variants generated in this study have potential for industrial production and application.

Thermostability enhancement of polyethylene terephthalate degrading PETase using self- and nonself-ligating protein scaffolding approaches

Polyethylene terephthalate (PET) hydrolase enzymes show promise for enzymatic PET degradation and green recycling of single-use PET vessels representing a major source of global pollution. Their full potential can be unlocked with enzyme engineering to render activities on recalcitrant PET substrates commensurate with cost-effective recycling at scale. Thermostability is a highly desirable property in industrial enzymes, often imparting increased robustness and significantly reducing quantities required. To date, most engineered PET hydrolases show improved thermostability over their parental enzymes. Here, we report engineered thermostable variants of Ideonella sakaiensis PET hydrolase enzyme (IsPETase) developed using two scaffolding strategies. The first employed SpyCatcher-SpyTag technology to covalently cyclize IsPETase, resulting in increased thermostability that was concomitant with reduced turnover of PET substrates compared to native IsPETase. The second approach using a GFP-nanobody fusion protein (vGFP) as a scaffold yielded a construct with a melting temperature of 80°C. This was further increased to 85°C when a thermostable PETase variant (FAST PETase) was scaffolded into vGFP, the highest reported so far for an engineered PET hydrolase derived from IsPETase. Thermostability enhancement using the vGFP scaffold did not compromise activity on PET compared to IsPETase. These contrasting results highlight potential topological and dynamic constraints imposed by scaffold choice as determinants of enzyme activity.

Short Peptides for Hydrolase Supramolecular Mimicry and Their Potential Applications

Hydrolases are enzymes that have found numerous applications in various industrial sectors spanning from pharmaceuticals to foodstuff and beverages, consumers' products such as detergents and personal care, textiles, and even for biodiesel production and environmental bioremediation. Self-assembling and gelling short peptides have been designed for their mimicry so that their supramolecular organization leads to the creation of hydrophobic pockets for catalysis to occur. Catalytic gels of this kind can also find numerous industrial applications to address important global challenges of our time. This concise review focuses on the last 5 years of progress in this fast-paced, popular field of research with an eye towards the future.

Discovery and rational engineering of PET hydrolase with both mesophilic and thermophilic PET hydrolase properties

Excessive polyethylene terephthalate (PET) waste causes a variety of problems. Extensive research focused on the development of superior PET hydrolases for PET biorecycling has been conducted. However, template enzymes employed in enzyme engineering mainly focused on IsPETase and leaf-branch compost cutinase, which exhibit mesophilic and thermophilic hydrolytic properties, respectively. Herein, we report a PET hydrolase from Cryptosporangium aurantiacum (CaPETase) that exhibits high thermostability and remarkable PET degradation activity at ambient temperatures. We uncover the crystal structure of CaPETase, which displays a distinct backbone conformation at the active site and residues forming the substrate binding cleft, compared with other PET hydrolases. We further develop a CaPETase^M9 variant that exhibits robust thermostability with a T_m of 83.2 °C and 41.7-fold enhanced PET hydrolytic activity at 60 °C compared with CaPETase^WT. CaPETase^M9 almost completely decompose both transparent and colored post-consumer PET powder at 55 °C within half a day in a pH-stat bioreactor.

Rational redesign of thermophilic PET hydrolase LCCICCG to enhance hydrolysis of high crystallinity polyethylene terephthalates

Polyethylene terephthalate (PET)-degrading enzymes represent a promising solution to the plastic pollution. However, PET-degrading enzymes, even thermophilic PETase, can effectively degrade low-crystallinity (∼8%) PETs, but exhibit weak depolymerization of more common, high-crystallinity (30-50%) PETs. Here, based on the thermophilic PETase, LCCICCG, we proposed two strategies for rational redesign of LCCICCG using the machine learning tool, Preoptem, combined with evolutionary analysis. Six single-point mutants (S32L, D18T, S98R, T157P, E173Q, N213P) were obtained that exhibit higher catalytic efficiency towards PET powder than wild-type LCCICCG at 75 °C. Additionally, the optimal temperature for degrading 39.07% crystalline PET increased from 65 °C in the wild-type LCCICCG to between 75 and 80 °C in the LCCICCG_I6M mutant that carries all six single-point mutations. Especially, the LCCICCG_I6M mutant has a significantly higher degradation effect on some commonly used bottle-grade plastic powders at 75-80 °C than that of wild type. The enzymatic digestion of ground 31.30% crystalline PET water bottles by LCCICCG_I6M yielded 31.91 ± 0.99 mM soluble products in 24 h, which was 3.64 times that of LCCICCG (8.77 ± 1.52 mM). Overall, this study provides a feasible route for engineering thermostable enzymes that can degrade high-crystallinity PET plastic.

Enantioselectivity and origin of enhanced efficiency in polyethylene terephthalate hydrolases catalyzed depolymerization

Biotechnology is one of the most promising strategies to resolve the global crisis of plastic pollution. A clear understanding of the core enzyme mechanisms in the biotransformation process is critical for rational enzyme engineering and for practical, industrial-scale applications. Herein, we systematically examined and evidenced a largely unexplored piece in the depolymerization mechanism catalyzed by polyethylene terephthalate (PET) hydrolases: their enantioselectivity. We found that all the short-lived tetrahedron intermediates (IM3 and IM8) possess S-type chirality in six representative PET hydrolases. For instance, the binding percentage ratio of pro-S:pro-R is 57:21 in FAST-PETase, while pro-S binding leads to a much lower average energy barrier (5.2 kcal/mol) than pro-R binding (33.1 kcal/mol). Key structural features (e.g. the angle for Ser@H1-His@N1-PET@O2 and distance for His@N1-PET@O2) that significantly modulate the enantioselectivity were identified. The origin of the energy landscape variation between wild-type IsPETase and mutant FAST-PETase was also unveiled via analysis of key features, the distortion/interaction energy, and non-covalent bond interactions. This study supplies the missing piece in the mechanism for depolymerization catalyzed by PET hydrolases, and will aid in the rational design of enzymes for industrial recycling of PET plastic waste.

Complete Depolymerization of PET Wastes by an Evolved PET Hydrolase from Directed Evolution

PETase displays great potential in PET depolymerization. Directed evolution has been limited to engineer PETase due to the lack of high-throughput screening assay. In this study, a novel fluorescence-based high-throughput screening assay employing a newly designed substrate, bis (2-hydroxyethyl) 2-hydroxyterephthalate (termed BHET-OH), was developed for PET hydrolases. The best variant DepoPETase produced 1407-fold more products towards amorphous PET film at 50 °C and showed a 23.3 °C higher T_m value than the PETase WT. DepoPETase enabled complete depolymerization of seven untreated PET wastes and 19.1 g PET waste (0.4 % W_enzyme /W_PET ) in liter-scale reactor, suggesting that it is a potential candidate for industrial PET depolymerization processes. The molecular dynamic simulations revealed that the distal substitutions stabilized the loops around the active sites and transmitted the stabilization effect to the active sites through enhancing inter-loop interactions network.

Enzymes' Power for Plastics Degradation

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

A Dual Fluorescence Assay Enables High-Throughput Screening for Poly(ethylene terephthalate) Hydrolases

The drastically increasing consumption of petroleum-derived plastics hasserious environmental impacts and raises public concerns. Poly(ethylene terephthalate) (PET) is amongst the most extensively produced synthetic polymers. Enzymatic hydrolysis of PET recently emerged as an enticing path for plastic degradation and recycling. In-lab directed evolution has revealed the great potential of PET hydrolases (PETases). However, the time-consuming and laborious PETase assays hinder the identification of effective variants in large mutant libraries. Herein, we devise and validate a dual fluorescence-based high-throughput screening (HTS) assay for a representative IsPETase. The two-round HTS of a pilot library consisting of 2850 IsPETase variants yields six mutant IsPETases with 1.3-4.9 folds improved activities. Compared to the currently used structure- or computational redesign-based PETase engineering, this HTS approach provides a new strategy for discovery of new beneficial mutation patterns of PETases.

Role of distal sites in enzyme engineering

The limitations associated with natural enzyme catalysis have triggered the rise of the field of protein engineering. Traditional rational design was based on the analysis of protein structural information and catalytic mechanisms to identify key active sites or ligand binding sites to reshape the substrate pocket. The role and significance of functional sites in the active center have been studied extensively. With a deeper understanding of the structure-catalysis relationship map, the entire protein molecule can be filled with residues that play a substantial role in its structure and function. However, the catalytic mechanism underlying distal mutations remains unclear. The aim of this review was to highlight the criticality of the distal site in enzyme engineering based on the following three aspects: What can distal mutations exert on function from mutability landscape? How do distal sites influence enzyme function? How to predict and design distal mutations? This review provides insights into the catalytic mechanism of enzymes from the global interaction network, knowledge from sequence-structure-dynamics-function relationships, and strategies for distal mutation-based protein engineering.

Construction of Fusion Protein with Carbohydrate-Binding Module and Leaf-Branch Compost Cutinase to Enhance the Degradation Efficiency of Polyethylene Terephthalate

Poly(ethylene terephthalate) (PET) is a manufactured plastic broadly available, whereas improper disposal of PET waste has become a serious burden on the environment. Leaf-branch compost cutinase (LCC) is one of the most powerful and promising PET hydrolases, and its mutant LCCICCG shows high catalytic activity and excellent thermal stability. However, low binding affinity with PET has been found to dramatically limit its further industrial application. Herein, TrCBM and CfCBM were rationally selected from the CAZy database to construct fusion proteins with LCCICCG, and mechanistic studies revealed that these two domains could bind with PET favorably via polar amino acids. The optimal temperatures of LCCICCG-TrCBM and CfCBM-LCCICCG were measured to be 70 and 80 °C, respectively. Moreover, these two fusion proteins exhibited favorable thermal stability, maintaining 53.1% and 48.8% of initial activity after the incubation at 90 °C for 300 min. Compared with LCCICCG, the binding affinity of LCCICCG-TrCBM and CfCBM-LCCICCG for PET has been improved by 1.4- and 1.3-fold, respectively, and meanwhile their degradation efficiency on PET films was enhanced by 3.7% and 24.2%. Overall, this study demonstrated that the strategy of constructing fusion proteins is practical and prospective to facilitate the enzymatic PET degradation ability.

Metagenomic Screening of a Novel PET Esterase via In Vitro Expression System

Metagenomic screening is a widely applied biotechnological approach for screening of novel industrial enzymes. The traditional method of metagenomic screening is based on the functional analyses of heterologously expressed environmental genes in a suitable host, which is the bottleneck of this method. To avoid limitation from the clone-dependent system, an in vitro expression technology has been developed in combination with next-generation sequencing and bioinformatics. First, the sequence profile of a target enzyme, e.g., poly(ethylene terephthalate) esterase in this protocol, is constructed according to the sequences of well-characterized enzymes. Then, the sequence screening is performed with this computationally generated profile among all available metagenomic databases. Afterwards, the candidate genes are synthesized and expressed in vitro with RNA polymerase and translation machinery from special cell extract. Finally, such in vitro produced enzymes are directly applied for the functional analyses. Comparing to the traditional screening methods, this in vitro screening technology can not only save time and materials, but also be easily developed for high-throughput screening with an automatic pipetting robot.

Mechanoenzymatic reactions for the hydrolysis of PET†

Recent advances in the enzymatic degradation of poly(ethylene terphthalate) (PET) have led to a number of PET hydrolytic enzymes and mutants being developed. With the amount of PET building up in the natural world, there is a pressing need to develop scalable methods of breaking down the polymer into its monomers for recycling or other uses. Mechanoenzymatic reactions have gained traction recently as a green and efficient alternative to traditional biocatalytic reactions. For the first time we report increased yields of PET degradation by whole cell PETase enzymes by up to 27-fold by utilising ball milling cycles of reactive aging, when compared with typical solution-based reactions. This methodology leads to up to a 2600-fold decrease in the solvent required when compared with other leading degradation reactions in the field and a 30-fold decrease in comparison to reported industrial scale PET hydrolysis reactions.

Mechanoenzymatic reactions are described for the degradation of different PET materials using whole cell PETases.

Sourcing thermotolerant poly(ethylene terephthalate) hydrolase scaffolds from natural diversity

Enzymatic deconstruction of poly(ethylene terephthalate) (PET) is under intense investigation, given the ability of hydrolase enzymes to depolymerize PET to its constituent monomers near the polymer glass transition temperature. To date, reported PET hydrolases have been sourced from a relatively narrow sequence space. Here, we identify additional PET-active biocatalysts from natural diversity by using bioinformatics and machine learning to mine 74 putative thermotolerant PET hydrolases. We successfully express, purify, and assay 51 enzymes from seven distinct phylogenetic groups; observing PET hydrolysis activity on amorphous PET film from 37 enzymes in reactions spanning pH from 4.5-9.0 and temperatures from 30-70 °C. We conduct PET hydrolysis time-course reactions with the best-performing enzymes, where we observe differences in substrate selectivity as function of PET morphology. We employed X-ray crystallography and AlphaFold to examine the enzyme architectures of all 74 candidates, revealing protein folds and accessory domains not previously associated with PET deconstruction. Overall, this study expands the number and diversity of thermotolerant scaffolds for enzymatic PET deconstruction.

Critical Review on the Progress of Plastic Bioupcycling Technology as a Potential Solution for Sustainable Plastic Waste Management

Plastic production worldwide has doubled in the last two decades and is expected to reach a four-fold increase by 2050. The durability of plastic makes them a perfect material for many applications, but it is also a key limitation to their end-of-life management. The current plastic lifecycle is far from circular, with only 13% being collected for recycling and 9% being successfully recycled, indicating the failure of current recycling technology. The remaining plastic waste streams are thus incinerated, landfilled, or worse, mismanaged, leading to them leaking into the environment. To promote plastic circularity, keeping material in the loop is a priority and represents a more sustainable solution. This can be achieved through the reuse of plastic items, or by using plastic waste as a resource for new materials, instead of discarding them as waste. As the discovery of plastic-degrading/utilizing microorganisms and enzymes has been extensively reported recently, the possibility of developing biological plastic upcycling processes is opening up. An increasing amount of studies have investigated the use of plastic as a carbon source for biotechnological processes to produce high-value compounds such as bioplastics, biochemicals, and biosurfactants. In the current review, the advancements in fossil-based plastic bio- and thermochemical upcycling technologies are presented and critically discussed. In particular, we highlight the developed (bio)depolymerization coupled with bioconversion/fermentation processes to obtain industrially valuable products. This review is expected to contribute to the future development and scale-up of effective plastic bioupcycling processes that can act as a drive to increase waste removal from the environment and valorize post-consumer plastic streams, thus accelerating the implementation of a circular (plastic) economy.

A novel metagenome-derived viral RNA polymerase and its application in a cell-free expression system for metagenome screening

The mining of genomes from non-cultivated microorganisms using metagenomics is a powerful tool to discover novel proteins and other valuable biomolecules. However, function-based metagenome searches are often limited by the time-consuming expression of the active proteins in various heterologous host systems. We here report the initial characterization of novel single-subunit bacteriophage RNA polymerase, EM1 RNAP, identified from a metagenome data set obtained from an elephant dung microbiome. EM1 RNAP and its promoter sequence are distantly related to T7 RNA polymerase. Using EM1 RNAP and a translation-competent Escherichia coli extract, we have developed an efficient medium-throughput pipeline and protocol allowing the expression of metagenome-derived genes and the production of proteins in cell-free system is sufficient for the initial testing of the predicted activities. Here, we have successfully identified and verified 12 enzymes acting on bis(2-hydroxyethyl) terephthalate (BHET) in a completely clone-free approach and proposed an in vitro high-throughput metagenomic screening method.

Microbial enzymes will offer limited solutions to the global plastic pollution crisis

Global economies depend on the use of fossil-fuel-based polymers with 360-400 million metric tons of synthetic polymers being produced per year. Unfortunately, an estimated 60% of the global production is disposed into the environment. Within this framework, microbiologists have tried to identify plastic-active enzymes over the past decade. Until now, this research has largely failed to deliver functional biocatalysts acting on the commodity polymers such as polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), ether-based polyurethane (PUR), polyamide (PA), polystyrene (PS) and synthetic rubber (SR). However, few enzymes are known to act on low-density and low-crystalline (amorphous) polyethylene terephthalate (PET) and ester-based PUR. These above-mentioned polymers represent >95% of all synthetic plastics produced. Therefore, the main challenge microbiologists are currently facing is in finding polymer-active enzymes targeting the majority of fossil-fuel-based plastics. However, identifying plastic-active enzymes either to implement them in biotechnological processes or to understand their potential role in nature is an emerging research field. The application of these enzymes is still in its infancy. Here, we summarize the current knowledge on microbial plastic-active enzymes, their global distribution and potential impact on plastic degradation in industrial processes and nature. We further outline major challenges in finding novel plastic-active enzymes, optimizing known ones by synthetic approaches and problems arising through falsely annotated and unfiltered use of database entries. Finally, we highlight potential biotechnological applications and possible re- and upcycling concepts using microorganisms.

Enhancement of the degradation capacity of IsPETase for PET plastic degradation by protein engineering

The enormous waste of polyethylene terephthalate (PET) plastic has a great negative impact on the ecological environment because of its chemical inertia. To reduce the environmental threat posed by PET plastic, researchers gradually concentrate on the biodegradation of PET plastic. In this study, DuraPETase^{N233C/S282C/H214S/S245R} (DuraPETase-4M) was designed through protein engineering, which can be used to improve the efficiency of PET plastic biodegradation. Based on the DuraPETase, a pair of disulfide bonds (N233C/S282C) was added to improve the thermal stability. Meanwhile, the key region flexibility adjustment (H214S) was proposed to enhance the biodegradation capacity of PET plastic. Additionally, protein surface electrostatic charge optimization (S245R) was adopted to improve the binding ability between enzyme and PET plastic. Based on molecular dynamic simulations (MDs), the rationality of the design was further verified. This study provides a strategy for obtaining high-efficiency PET degradation mutants and a new possibility of environmentally friendly plastic degradation.

Multiple Substrate Binding Mode-Guided Engineering of a Thermophilic PET Hydrolase

Thermophilic polyester hydrolases (PES-H) have recently enabled biocatalytic recycling of the mass-produced synthetic polyester polyethylene terephthalate (PET), which has found widespread use in the packaging and textile industries. The growing demand for efficient PET hydrolases prompted us to solve high-resolution crystal structures of two metagenome-derived enzymes (PES-H1 and PES-H2) and notably also in complex with various PET substrate analogues. Structural analyses and computational modeling using molecular dynamics simulations provided an understanding of how product inhibition and multiple substrate binding modes influence key mechanistic steps of enzymatic PET hydrolysis. Key residues involved in substrate-binding and those identified previously as mutational hotspots in homologous enzymes were subjected to mutagenesis. At 72 °C, the L92F/Q94Y variant of PES-H1 exhibited 2.3-fold and 3.4-fold improved hydrolytic activity against amorphous PET films and pretreated real-world PET waste, respectively. The R204C/S250C variant of PES-H1 had a 6.4 °C higher melting temperature than the wild-type enzyme but retained similar hydrolytic activity. Under optimal reaction conditions, the L92F/Q94Y variant of PES-H1 hydrolyzed low-crystallinity PET materials 2.2-fold more efficiently than LCC ICCG, which was previously the most active PET hydrolase reported in the literature. This property makes the L92F/Q94Y variant of PES-H1 a good candidate for future applications in industrial plastic recycling processes.

Directional-path modification strategy enhances PET hydrolase catalysis of plastic degradation

Poly (ethylene terephthalate) (PET) is a widely used type of general plastic that produces a significant amount of waste due to its non-degradable properties. We propose a novel directional-path modification (DPM) strategy, involving positive charge amino acid introduction and binding groove remodeling, and apply it to Thermobifida fusca cutinase to enhance PET degradation. The highest value of PET degradation (90%) was achieved in variant 4Mz (H184S/Q92G/F209I/I213K), exhibiting values almost 30-fold that of the wild-type. We employed molecular docking, molecular dynamics simulations, and QM/MM MD for the degradation process of PET, accompanied by acylation and deacylation. We found that the distance of nucleophilic attack was reduced from about 4.6 Å in the wild type to 3.8 Å in 4Mz, and the free energy barrier of 4Mz dropped from 14.3 kcal/mol to 7.1 kcal/mol at the acylation which was the rate-limiting step. Subsequently, the high efficiency and universality of the DPM strategy were successfully demonstrated in LCC, Est119, and BhrPETase enhancing the degradation activity of PET. Finally, the highest degradation rate of the pretreated commercial plastic bottles had reached to 73%. The present study provides insight into the molecular binding mechanism of PET into the PET hydrolases structure and proposes a novel DPM strategy that will be useful for the engineering of more efficient enzymes for PET degradation.

Mechanism-Based Design of Efficient PET Hydrolases

Polyethylene terephthalate (PET) is the most widespread synthetic polyester, having been utilized in textile fibers and packaging materials for beverages and food, contributing considerably to the global solid waste stream and environmental plastic pollution. While enzymatic PET recycling and upcycling have recently emerged as viable disposal methods for a circular plastic economy, only a handful of benchmark enzymes have been thoroughly described and subjected to protein engineering for improved properties over the last 16 years. By analyzing the specific material properties of PET and the reaction mechanisms in the context of interfacial biocatalysis, this Perspective identifies several limitations in current enzymatic PET degradation approaches. Unbalanced enzyme-substrate interactions, limited thermostability, and low catalytic efficiency at elevated reaction temperatures, and inhibition caused by oligomeric degradation intermediates still hamper industrial applications that require high catalytic efficiency. To overcome these limitations, successful protein engineering studies using innovative experimental and computational approaches have been published extensively in recent years in this thriving research field and are summarized and discussed in detail here. The acquired knowledge and experience will be applied in the near future to address plastic waste contributed by other mass-produced polymer types (e.g., polyamides and polyurethanes) that should also be properly disposed by biotechnological approaches.

Improvement of the enzymatic detoxification activity towards mycotoxins through structure-based engineering

Mycotoxin contamination of food and feed is posing a serious threat to the global food safety and public health. Biological detoxification mediated by enzymes has emerged as a promising approach, as they can specifically degrade mycotoxins into non-toxic ones. However, the low degradation efficiency and stability limit their further application. To optimize the enzymes for mycotoxin removal, modification strategies that combine computational design with their structural data have been developed. Accordingly, this review will comprehensively summarize the recent trends in structure-based engineering to improve the enzyme catalytic efficiency, selectivity and stability in mycotoxins detoxification, which also provides perspectives in obtaining innovative and effective biocatalysts for mycotoxins degradation.

A cocktail of protein engineering strategies: breaking the enzyme bottleneck one by one for high UTP production in vitro

The pyrimidine metabolic pathway is tightly regulated in microorganisms, allowing limited success in metabolic engineering for the production of pathway-related substances. Here, we constructed a four-enzyme coupled system for the in vitro production of uridine triphosphate (UTP). The enzymes used include nucleoside kinase, uridylate kinase, nucleoside diphosphate kinase, and polyphosphate kinase for energy regeneration. All these enzymes are derived from extremophiles. To increase the total and unit time yield of the product, three enzymes other than polyphosphate kinase were modified separately by multiple protein engineering strategies. A nucleoside kinase variant with increased specific activity from 2.7 U/mg to 36.5 U/mg, a uridylate kinase variant (specific activity of 37.1 U/mg) with a 5.2-fold increase in thermostability, and a nucleoside diphosphate kinase variant with a 2-fold increase in specific activity to over 900 U/mg were obtained, respectively. The reaction conditions of the coupled system were further optimized, and a two-stage method was taken to avoid the problem of enzymatic pH adaptation mismatch. Under optimal conditions, this system can produce more than 65 mM UTP (31.5 g/L) in 3.0 h. The substrate conversion rate exceeded 98% and the maximum UTP productivity reached 40 mM/h. This article is protected by copyright. All rights reserved.

Techniques to save the sea

Ocean health has declined dramatically over the past few decades, threatening the rich biodiversity and ecosystem services the ocean provides. In this feature, we look at the life science techniques that could potentially save the sea.

Processive Enzymes Kept on a Leash: How Cellulase Activity in Multienzyme Complexes Directs Nanoscale Deconstruction of Cellulose

Biological deconstruction of polymer materials gains efficiency from the spatiotemporally coordinated action of enzymes with synergetic function in polymer chain depolymerization. To perpetuate enzyme synergy on a solid substrate undergoing deconstruction, the overall attack must alternate between focusing the individual enzymes locally and dissipating them again to other surface sites. Natural cellulases working as multienzyme complexes assembled on a scaffold protein (the cellulosome) maximize the effect of local concentration yet restrain the dispersion of individual enzymes. Here, with evidence from real-time atomic force microscopy to track nanoscale deconstruction of single cellulose fibers, we show that the cellulosome forces the fiber degradation into the transversal direction, to produce smaller fragments from multiple local attacks ("cuts"). Noncomplexed enzymes, as in fungal cellulases or obtained by dissociating the cellulosome, release the confining force so that fiber degradation proceeds laterally, observed as directed ablation of surface fibrils and leading to whole fiber "thinning". Processive cellulases that are enabled to freely disperse evoke the lateral degradation and determine its efficiency. Our results suggest that among natural cellulases, the dispersed enzymes are more generally and globally effective in depolymerization, while the cellulosome represents a specialized, fiber-fragmenting machinery.