Metastable Phase-Controlled Synthesis of Mesoporous Molybdenum Carbides for Efficient Alkaline Hydrogen Evolution

In-situ revealed inhibition of W2C to excessive oxidation of CoOOH for high-efficiency alkaline overall water splitting

The design of low-cost, efficient, and stable multifunctional basic catalysts to replace the high-cost noble metal catalysts remains a challenge. In this work, we report a dual-component Co-W2C catalytic system which achieves excellent properties of hydrogen evolution reaction (HER, η10 = 63 mV), oxygen evolution reaction (OER, η10 = 259 mV) and overall water splitting (η10 = 1.53 V) by adjusting the interfacial electronic structure of the material. Further density functional theory (DFT) calculations indicate that the efficient electronic modulation at the W2C/Co interface leads to the generation of favorable hydroxyl and hydrogen species energetics on the hybrid surface. The results of the in-situ Raman spectra show that W2C can suppress the excessive oxidation of the active site during the OER process, and the existence of core-shell structure also protects the W2C substrate. The stable and efficient catalytic performance of Co-W2C is attributed to the common advantages of structural and interface manipulation.

Oxygen-bridged Schottky junction in ZnO-Ni3ZnC0.7 promotes photocatalytic reduction of CO2 to CO: Steering charge flow and modulating electron density of active sites

Developing carbon dioxide (CO2) photocatalysts from transition metal carbides (TMCs) with abundant active sites, modulable electron cloud density, as well as low cost and high stability is of great significance for artificial photosynthesis. Building an efficient electron transfer channel between the photo-excitation site and the reaction-active site to extract and steer photo-induced electron flow is necessary but challenging for the highly selective conversion of CO2. In this study, we achieved an oxygen-bridged Schottky junction between ZnO and Ni3ZnC0.7 (denoted as Znoxide-O-ZnTMC) through a ligand-vacancy strategy of MOF. The ZnO-Ni3ZnC0.7 heterostructure integrates the photo-exciter (ZnO), high-speed electron transport channel (Znoxide-O-ZnTMC), and reaction-active species (Ni3ZnC0.7), where Znoxide-O-ZnTMC facilitates the transfer of excited electrons in ZnO to Ni3ZnC0.7. The Zn atoms in Ni3ZnC0.7 serve as electron-rich active sites, regulating the CO2 adsorption energy, promoting the transformation of *COOH to CO, and inhibiting H2 production. The ZnO-Ni3ZnC0.7 shows a high CO yield of 2674.80 μmol g-1h-1 with a selectivity of 93.40 % and an apparent quantum yield of 18.30 % (λ = 420 nm) with triethanolamine as a sacrificial agent. The CO production rate remains at 96.40 % after 18 h. Notably, ZnO-Ni3ZnC0.7 exhibits a high CO yield of 873.60 μmol g-1h-1 with a selectivity of 90.20 % in seawater.

Rapid synthesis of high-purity molybdenum carbide with controlled crystal phases

The synthesis of phase-pure carbide nanomaterials is crucial for understanding their structure-performance relationships, and for advancing their application in catalysis. Molybdenum carbides, in particular, have garnered increasing interest due to their Pt-like surface electronic properties and high catalytic activity. Traditional methods for synthesizing molybdenum carbide are often lengthy and energy-intensive, leading to an uncontrolled phase, low purity, and excessive carbon coverage, which hinder their catalytic performance improvement. This work introduces a novel pulsed Joule heating (PJH) technique that overcomes these limitations, enabling the controlled synthesis of high-purity molybdenum carbides (β-Mo2C, η-MoC1-x, and α-MoC1-x) within seconds by using MoOx/4-Cl-o-phenylenediamine as the hybrid precursor. The PJH method allows precise control over the diffusion of carbon species in the Mo-C system, resulting in a significantly improved phase purity of up to 96.89 wt%. Moreover, the electronic structure of platinum catalysts on molybdenum carbide was modulated through electron metal-support interaction (EMSI) between Pt and MoxC, and contributed to enhanced catalytic performance compared to carbon-supported Pt catalysts during the hydrogen evolution reaction. Overall, this work paves the way for efficient production of high-quality molybdenum carbide nanomaterials, and thus is expected to accelerate their industrial deployments in practical catalytic reactions.

Electron transfer at the heterojunction interface of CoP/MoS2 for efficient electrocatalytic hydrogen evolution reaction

Modulating the electronic states of electrocatalysts is critical for achieving efficient hydrogen evolution reaction (HER). However, how to develop electrocatalysts with superior electronic states is an urgent challenge that must be addressed. Herein, we prepared the CoP/MoS2 heterojunction with a microsphere morphology consisting of thin nanosheets using a facile two-step method. The catalyst's ultrathin nanosheet structure not only provides an extensive surface area for exposing active sites, but it also enables ion transport and bubble release. Electron transfer occurs between CoP and MoS2, optimizing the heterojunction's charge distribution and enhancing the intermediates' adsorption capabilities. As a result, the CoP/MoS2 heterojunction exhibits outstanding electrocatalytic hydrogen evolution activity with an overpotential of only 88 mV at a current density of 10 mA cm-2, which exceeds both the sulfide heterojunction Co9S8/MoS2 and the phosphide heterojunction CoP/CoMoP2. The experimental results and DFT calculation results show that the former has stronger synergistic effects and higher HER activity. This work sheds light on the exploration of efficient heterojunction electrocatalysts with excellent electronic structures.

In situ synthesis of tentacle-like NiC/Mo2C/NF nanorods array with excellent hydrogen evolution reaction at high current densities

The problem limiting the use of hydrogen evolution reactions in industry is the inability of electrocatalysts to operate stably at high current densities, so the development of stable and efficient electrocatalysts is important for hydrogen production by water splitting. By designing a rational interface engineering not only can the problem of limited number of catalytic sites in the catalyst be solved, but also can facilitate electron transfer, thus enhancing the efficiency of water splitting. Here, we designed a two-stage chemical vapour deposition method to construct NiC/Mo2C nanorod arrays on nickel foam to enhance the electrocatalytic ability of the catalysts, which exhibited efficient HER catalytic activity due to their special tentacle-like nanorod structure and abundant heterogeneous junction surfaces, which brought about abundant active sites as well as promoted electron transfer capability. The resulting catalysts provide current densities of 10, 100 and 500 mA cm-2 with overpotentials of 31, 153 and 264 mV, and exhibit excellent stability at current densities of 10 mA cm-2 for 200 h. This discovery provides a new idea for the rational design of catalysts with special morphologies.

Silica-Derived Nanostructured Electrode Materials for ORR, OER, HER, CO2RR Electrocatalysis, and Energy Storage Applications: A Review

Silica-derived nanostructured catalysts (SDNCs) are a class of materials synthesized using nanocasting and templating techniques, which involve the sacrificial removal of a silica template to generate highly porous nanostructured materials. The surface of these nanostructures is functionalized with a variety of electrocatalytically active metal and non-metal atoms. SDNCs have attracted considerable attention due to their unique physicochemical properties, tunable electronic configuration, and microstructure. These properties make them highly efficient catalysts and promising electrode materials for next generation electrocatalysis, energy conversion, and energy storage technologies. The continued development of SDNCs is likely to lead to new and improved electrocatalysts and electrode materials. This review article provides a comprehensive overview of the recent advances in the development of SDNCs for electrocatalysis and energy storage applications. It analyzes 337,061 research articles published in the Web of Science (WoS) database up to December 2022 using the keywords "silica", "electrocatalysts", "ORR", "OER", "HER", "HOR", "CO2RR", "batteries", and "supercapacitors". The review discusses the application of SDNCs for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), supercapacitors, lithium-ion batteries, and thermal energy storage applications. It concludes by discussing the advantages and limitations of SDNCs for energy applications.

Intercalated PtCo Electrocatalyst of Vanadium Metal Oxide Increases Charge Density to Facilitate Hydrogen Evolution

Efforts to develop high-performance electrocatalysts for the hydrogen evolution reaction (HER) are of utmost importance in ensuring sustainable hydrogen production. The controllable fabrication of inexpensive, durable, and high-efficient HER catalysts still remains a great challenge. Herein, we introduce a universal strategy aiming to achieve rapid synthesis of highly active hydrogen evolution catalysts using a controllable hydrogen insertion method and solvothermal process. Hydrogen vanadium bronze HxV2O5 was obtained through controlling the ethanol reaction rate in the oxidization process of hydrogen peroxide. Subsequently, the intermetallic PtCoVO supported on two-dimensional graphitic carbon nitride (g-C3N4) nanosheets was prepared by a solvothermal method at the oil/water interface. In terms of HER performance, PtCoVO/g-C3N4 demonstrates superior characteristics compared to PtCo/g-C3N4 and PtCoV/g-C3N4. This superiority can be attributed to the notable influence of oxygen vacancies in HxV2O5 on the electrical properties of the catalyst. By adjusting the relative proportions of metal atoms in the PtCoVO/g-C3N4 nanomaterials, the PtCoVO/g-C3N4 nanocomposites show significant HER overpotential of η10 = 92 mV, a Tafel slope of 65.21 mV dec-1, and outstanding stability (a continuous test lasting 48 h). The nanoarchitecture of a g-C3N4-supported PtCoVO nanoalloy catalyst exhibits exceptional resistance to nanoparticle migration and corrosion, owing to the strong interaction between the metal nanoparticles and the g-C3N4 support. Pt, Co, and V simultaneous doping has been shown by Density Functional Theory (DFT) calculations to enhance the density of states (DOS) at the Fermi level. This augmentation leads to a higher charge density and a reduction in the adsorption energy of intermediates.

Controllable Electrochemical Liberation of Hydrogen from Sodium Borohydride

Sodium borohydride (NaBH4 ) has earned recognition as a promising hydrogen carrier, attributed to its exceptional hydrogen storage capacity, boasting a high theoretical storage capacity of 10.8 wt %. Nonetheless, the utilization of traditional pyrolysis and hydrolysis methods still presents a formidable challenge in achieving controlled hydrogen generation especially under ambient conditions. In this work, we report an innovative electrochemical strategy for production H2 by coupling NaBH4 electrooxidation reaction (BOR) at anode in alkaline media with hydrogen evolution reaction (HER) at cathode in acidic media. To implement this, we have developed a bifunctional electrocatalyst denoted as Pd-Mo2 C@CNTs, wherein Pd nanoparticles are grown in situ on Mo2 C embedded within N-doped carbon nanotubes. This electrocatalyst demonstrates exceptional performance in catalyzing both alkaline BOR and acidic HER. We have developed a hybrid acid/alkali cell, utilizing Pd/Mo2 C@CNTs as the anode and cathode electrocatalysts. This configuration showcases remarkable capabilities for self-sustained, precise, and uninterrupted indirect release of H2 stored in NaBH4 , even at high current densities of 100 mA cm-2 with a Faraday efficiency approaching 100 %. Additionally, this electrochemical device exhibits significant promise as a fuel cell, with the ability to deliver a maximum power density of 20 mW cm-2 .

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Mesoporous Metastable CuTe2 Semiconductor

Binary metastable semiconductor materials offer exciting possibilities in the field of optoelectronics, such as photovoltaics, tunable photosensors, and detectors. However, understanding their properties and translating them into practical applications can sometimes be challenging, owing to their thermodynamic instability. Herein, we report a temperature-controlled crystallization technique involving electrochemical deposition to produce metastable CuTe2 thin films that can reliably function under ambient conditions. A series of in situ heating/cooling cycle tests from room temperature to 200 °C followed by spectral, morphological, and compound analyses (such as ultraviolet-visible light spectroscopy, X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS)) suggest that the seeding electrodes play a key role in the realization of the metastable phase in CuTe2 films. In particular, CuTe2 films deposited on Al electrodes exhibit superior crystallinity and long-term stability compared with those grown on a Au substrate. The XRD data of thermally annealed CuTe2 thin films deposited on Al show a markedly sharp peak, indicating significantly increased crystal-domain sizes. Our method can be used to achieve the metastable phase of CuTe2 with a bandgap of 1.67 eV and offers outstanding photoresponsivity under different illumination conditions.

Synergistic Effect of Dual-Doped Carbon on Mo2C Nanocrystals Facilitates Alkaline Hydrogen Evolution

Molybdenum carbide (Mo2C) materials are promising electrocatalysts with potential applications in hydrogen evolution reaction (HER) due to low cost and Pt-like electronic structures. Nevertheless, their HER activity is usually hindered by the strong hydrogen binding energy. Moreover, the lack of water-cleaving sites makes it difficult for the catalysts to work in alkaline solutions. Here, we designed and synthesized a B and N dual-doped carbon layer that encapsulated on Mo2C nanocrystals (Mo2C@BNC) for accelerating HER under alkaline condition. The electronic interactions between the Mo2C nanocrystals and the multiple-doped carbon layer endow a near-zero H adsorption Gibbs free energy on the defective C atoms over the carbon shell. Meanwhile, the introduced B atoms afford optimal H2O adsorption sites for the water-cleaving step. Accordingly, the dual-doped Mo2C catalyst with synergistic effect of non-metal sites delivers superior HER performances of a low overpotential (99 mV@10 mA cm-2) and a small Tafel slope (58.1 mV dec-1) in 1 M KOH solution. Furthermore, it presents a remarkable activity that outperforming the commercial 10% Pt/C catalyst at large current density, demonstrating its applicability in industrial water splitting. This study provides a reasonable design strategy towards noble-metal-free HER catalysts with high activity.

Interfacial engineering and chemical reconstruction of Mo/Mo2C@CoO@NC heterostructure for promoting oxygen evolution reaction

Chemical reorganization and interfacial engineering in hybrid nanomaterials are promising strategies for enhancing electrocatalytic performance. Herein, MoO₃@zeolitic imidazolate framework-67 (ZIF-67) heterogeneous nanoribbons are designed through coordination assembly. By following heat treatment, a Mo/Mo₂C@CoO@NC heterostructure with nitrogen-doped carbon-encapsulated CoO hexagons (CoO@NC) anchored on the Mo/Mo₂C jag matrix was fabricated. Notably, through controllable experimental optimization, the as-prepared Mo/Mo₂C@CoO@NC heterostructure exhibits numerous active centers (e.g. Mo, Mo₂C, CoO, and NC), fully exposed active sites (numerous pores and jagged structures), and abundant heterointerfaces (Mo/Mo₂C, Mo₂C/CoO@NC, Mo₂C/amorphous, and CoO@NC/amorphous), and exhibits good conductivity (localized single-crystal behavior, graphitized carbon). As a result, the as-developed Mo/Mo₂C@CoO@NC heterostructures inherit impressive oxygen evolution reaction (OER) performance with an overpotential of only 215 mV at 10 mA cm^-2. Furthermore, Mo/Mo₂C@CoO@NC heterostructures exhibit excellent stability with a current density retention of 98.4% after 20 h chronoamperometry. This work provides deep insights into chemical reconstructions and tuning heterointerfaces to efficiently enhance the OER activity of heterostructure-based electrocatalysts.

Janus (Mo/β-Mo2C)@C heterostructure as an efficient electrocatalyst for the hydrogen evolution reaction in acidic and alkaline media

To explore low-cost, high-efficiency, and noble-metal-free catalysts for electrocatalytic water splitting in both acidic and alkaline media, the metal-metal carbide Janus hierarchical structure comprising Mo andβ-Mo₂C embedded on a carbon layer (Mo/β-Mo₂C)@C is synthesized by a hydrothermal reaction and subsequent low-temperature magnesium thermic process. Systematic characterization by XRD, XPS, Raman scattering, and SEM/TEM reveals the successful formation of metallic Mo andβ-Mo₂C nanoparticles. The synthesized (Mo/β-Mo₂C)@C has a large specific surface area and boasts highly efficient hydrogen evolution reaction activity including low overpotentials of 152 and 171 mV at a current density of 10 mA cm^-2and small Tafel slopes of 51.7 and 63.5 mV dec^-1in acidic and alkaline media, respectively. In addition, the catalyst shows outstanding stability for 48 h in both acidic and alkaline media. The excellent catalytic activity originates from more active sites and greater electron conductivity bestowed by the carbon layer, which also improves the long-term stability in both acidic and alkaline solutions.