Thermodynamic Stability, Redox Properties, and Reactivity of Mn3O4, Fe3O4, and Co3O4 Model Catalysts for N2O Decomposition: Resolving the Origins of Steady Turnover

Structure-Function Relationship of Highly Reactive CuOx Clusters on Co3 O4 for Selective Formaldehyde Sensing at Low Temperatures

Designing reactive surface clusters at the nanoscale on metal-oxide supports enables selective molecular interactions in low-temperature catalysis and chemical sensing. Yet, finding effective material combinations and identifying the reactive site remains challenging and an obstacle for rational catalyst/sensor design. Here, the low-temperature oxidation of formaldehyde with CuOx clusters on Co3 O4 nanoparticles is demonstrated yielding an excellent sensor for this critical air pollutant. When fabricated by flame-aerosol technology, such CuOx clusters are finely dispersed, while some Cu ions are incorporated into the Co3 O4 lattice enhancing thermal stability. Importantly, infrared spectroscopy of adsorbed CO, near edge X-ray absorption fine structure spectroscopy and temperature-programmed reduction in H2 identified Cu+ and Cu2+ species in these clusters as active sites. Remarkably, the Cu+ surface concentration correlated with the apparent activation energy of formaldehyde oxidation (Spearman's coefficient ρ = 0.89) and sensor response (0.96), rendering it a performance descriptor. At optimal composition, such sensors detected even the lowest formaldehyde levels of 3 parts-per-billion (ppb) at 75°C, superior to state-of-the-art sensors. Also, selectivity to other aldehydes, ketones, alcohols, and inorganic compounds, robustness to humidity and stable performance over 4 weeks are achieved, rendering such sensors promising as gas detectors in health monitoring, air and food quality control.

Boosting N2O Catalytic Decomposition by the Synergistic Effect of Multiple Elements in Cobalt-Based High-Entropy Oxides

Nitrous oxide (N2O) has a detrimental impact on the greenhouse effect, and its efficient catalytic decomposition at low temperatures remains challenging. Herein, the cobalt-based high-entropy oxide with a spinel-type structure (Co-HEO) is successfully fabricated via a facile coprecipitation method for N2O catalytic decomposition. The obtained Co-HEO catalyst displays more remarkable catalytic performance and higher thermal stability compared with single and binary Co-based oxides, as the temperature of 90% N2O decomposition (T90) is 356 °C. A series of characterization results reveal that the synergistic effect of multiple elements enhances the reducibility and augments oxygen vacancy in the high-entropy system, thus boosting the activity of the Co-HEO catalyst. Moreover, density functional theory (DFT) calculations and the temperature-programmed surface reaction (TPSR) with isotope labeling demonstrate that N2O decomposition on the Co-HEO catalyst follows the Langmuir-Hinshelwood (L-H) mechanism with the promotion of abundant oxygen vacancies. This work provides a fundamental understanding of the synergistic catalytic effect in N2O decomposition and paves the way for the novel environmental catalytic applications of HEO.

Efficient electrocatalyst for solar-driven electrolytic water splitting: Phosphorus (P) and niobium (Nb) co-doped NiFe2O4 nanosheet

In the context of hydrogen production through water electrolysis, the development of efficient and stable electrocatalysts is of paramount importance. However, the creation of cost-effective electrocatalysts poses a significant challenge. In this study, a P and Nb co-doped NiFe2O4 nanosheet is designed and grown on Fe foam (referred to as P, Nb-NiFe2O4/FF). The P, Nb-NiFe2O4/FF exhibits a distinctive crystalline/amorphous heterostructure, and the co-doping of P and Nb in the material leads to the exposure of additional catalytic active sites, optimization of the electronic structure, and enhancement of charge conductivity. Additionally, the P, Nb-NiFe2O4/FF possesses a superhydrophilic surface for the enhancement of charge/mass transfer at interface and a superaerophobic surface, facilitating the efficient release of gas. The P, Nb-NiFe2O4/FF demonstrates remarkable oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activities, achieving overpotential as low as 247 mV and 127 mV, respectively, to attain the current density response of 100 mA cm-2. Based on the high bifunctional activities, the P, Nb-NiFe2O4/FF requires only a working voltage of 1.56 V to obtain the current density of 10 mA cm-2 in overall water splitting. Furthermore, the overall water splitting device of P, Nb-NiFe2O4/FF is integrated with a commercial solar cell to simulate a solar-powered water splitting system, resulting in as superior solar-to-hydrogen conversion efficiency of 15.11%.

La and S Co-Doping Induced the Synergism of Multiphase Nickel-Iron Nanosheets with Rich Oxygen Vacancies to Trigger Large-Current-Density Oxygen Evolution and Urea Oxidation Reactions

The development of cost-effective electrocatalysts for oxygen evolution reaction (OER) and urea oxidation reaction (UOR) is of great significance for hydrogen production. Herein, La and S co-doped multiphase electrocatalyst (LSFN-63) is fabricated by metal-corrosion process. FeOOH can reduce the formation energy of NiOOH, and enhance the stability of NiOOH as active sites for OER/UOR. The rich oxygen vacancies can increase the number of active sites, optimize the adsorption of intermediates, and improve electrical conductivity. Beyond, La and S co-doping can also regulate the electronic structure of FeOOH. As a result, LSFN-63 presents a low overpotential of 210/450 mV at 100/1000 mA cm-2 , small Tafel slope (32 mV dec-1 ), and outstanding stability under 1000 mA cm-2 @60 h, and can also display excellent OER activity with 180 mV at 250 mA cm-2 and long-term catalytic durability at 250 mA cm-2 @135 h in 30 wt% KOH under 60 °C. Moreover, LSFN-63 demonstrates remarkable UOR performance in 1 m KOH + 0.5 m urea, which just requires an ultra-small overpotential of 140 mV at 100 mA cm-2 , and maintain long-term durability over 120 h. This work opens up a promising avenue for the development of high-efficiency electrocatalysts by a facile metal-corrosion strategy.

Phase Engineering of 2D Spinel-Type Manganese Oxides

2D magnetic materials have been of interest due to their unique long-range magnetic ordering in the low-dimensional regime and potential applications in spintronics. Currently, most studies are focused on strippable van der Waals magnetic materials with layered structures, which typically suffer from a poor stability and scarce species. Spinel oxides have a good environmental stability and rich magnetic properties. However, the isotropic bonding and close-packed nonlayered crystal structure make their 2D growth challenging, let alone the phase engineering. Herein, a phase-controllable synthesis of 2D single-crystalline spinel-type oxides is reported. Using the van der Waals epitaxy strategy, the thicknesses of the obtained tetragonal and hexagonal manganese oxide (Mn3 O4 ) nanosheets can be tuned down to 7.1 nm and one unit cell (0.7 nm), respectively. The magnetic properties of these two phases are evaluated using vibrating-sample magnetometry and first-principle calculations. Both structures exhibit a Curie temperature of 48 K. Owing to its ultrathin geometry, the Mn3 O4 nanosheet exhibits a superior ultraviolet detection performance with an ultralow noise power density of 0.126 pA Hz-1/2 . This study broadens the range of 2D magnetic semiconductors and highlights their potential applications in future information devices.

Spinel-Derived Formation and Amorphization of Bimetallic Oxyhydroxides for Efficient Electrocatalytic Biomass Oxidation

Replacing the oxygen evolution reaction (OER) with water-assisted oxidation of organic molecules represents a promising approach for achieving sustainable electrochemical biomass utilization. Among numerous OER catalysts, spinels have received substantial attention due to their manifold compositions and valence states, yet their application in biomass conversions remains rare. Herein, a series of spinels were investigated for the selective electrooxidation of furfural and 5-hydroxymethylfurfural, two model substrates for versatile value-added chemical products. Spinel sulfides universally exhibit superior catalytic performance compared to that of spinel oxides, and further investigations show that the replacement of oxygen with sulfur led to the complete phase transition of spinel sulfides into amorphous bimetallic oxyhydroxides during electrochemical activation, serving as the active species. Excellent values of conversion rate (100%), selectivity (100%), faradaic efficiency (>95%), and stability were achieved via sulfide-derived amorphous CuCo-oxyhydroxide. Furthermore, a volcano-like correlation was established between their BEOR and OER activities based on an OER-assisted organic oxidation mechanism.

Ceramic nanofiber membrane anchoring nanosized Mn2O3 catalytic ozonation of sulfamethoxazole in water

Catalytic ceramic nanofiber membranes (Mn@CNMs) were prepared by anchoring Mn₂O₃ nanoparticles on the pits of attapulgite (APT) nanofibers via an impregnation and in-situ precipitation method. An integrated catalytic ozonation/membrane filtration process applying Mn@CNM was employed to degrade sulfamethoxazole (SMX) and the removal achieved up to 81.3% during a 7-h continuous filtration. The reactive oxygen species (ROS) quenching and radical detection experiments were conducted to determine the contribution of ¹O₂, ·OH and O₂^·- towards the catalytic degradation of SMX. Moreover, Mn@CNM exhibited wide applicability for real water matrix and the total removal of various kinds of emerging contaminants in real hospital wastewater reached up to 98.5%. The excellent performances of Mn@CNM were attributed to the nano-confinement effect in the membrane layer. First, anchoring Mn₂O₃ nanoparticles on the pits of the APT surface suppressed the growth and aggregation of nanosized Mn₂O₃, providing abundant reactive sites for catalytic ozonation. Second, the interlaced APT nanofibers formed nano-sized network structures, where ROS and SMX were confined in close vicinity and ROS have more chances to attack SMX. This work provides a promising strategy for the preparation of catalytic ceramic membrane with high catalytic efficiency for degradation of emerging contaminants in water.

Three-Dimensional Monolithically Self-Grown Metal Oxide Highly Dense Nanonetworks as Free-Standing High-Capacity Anodes for Lithium-Ion Batteries

Transition metal oxides (TMOs) have been widely studied as potential next-generation anode materials, owing to their high theoretical gravimetric capacity. However, to date, these anodes syntheses are plagued with time-consuming preparation processes, two-dimensional electrode fabrication, binder requirements, and short operational cycling lives. Here, we present a scalable single-step reagentless process for the synthesis of highly dense Mn₃O₄-based nanonetwork anodes based on a simple thermal treatment transformation of low-grade steel substrates. The monolithic solid-state chemical self-transformation of the steel substrate results in a highly dense forest of Mn₃O₄ nanowires, which transforms the electrochemically inactive steel substrate into an electrochemically highly active anode. The proposed method, beyond greatly improving the current TMO performance, surpasses state-of-the-art commercial silicon anodes in terms of capacity and stability. The three-dimensional self-standing anode exhibits remarkably high capacities (>1500 mA h/g), a stable cycle life (>650 cycles), high Coulombic efficiencies (>99.5%), fast rate performance (>1.5 C), and high areal capacities (>2.5 mA h/cm²). This novel experimental paradigm acts as a milestone for next-generation anode materials in lithium-ion batteries, and pioneers a universal method to transform different kinds of widely available, low-cost, steel substrates into electrochemically active, free-standing anodes and allows for the massive reduction of anode production complexity and costs.

Mechanistic Studies of Oxygen-Atom Transfer (OAT) in the Homogeneous Conversion of N2O by Ru Pincer Complexes

As the overall turnover-limiting step (TOLS) in the homogeneous conversion of N2O, the oxygen-atom transfer (OAT) from an N2O to an Ru-H complex to generate an N2 and Ru-OH complex has been comprehensively investigated by density functional theory (DFT) computations. Theoretical results show that the proton transfer from Ru-H to the terminal N of endo N2O is most favorable pathway, and the generation of N2 via OAT is accomplished by a three-step mechanism [N2O-insertion into the Ru-H bond (TS-1-2, 24.1 kcal mol−1), change of geometry of the formed (Z)-O-bound oxyldiazene intermediate (TS-2-3, 5.5 kcal mol−1), and generation of N2 from the proton transfer (TS-3-4, 26.6 kcal mol−1)]. The Gibbs free energy of activation (ΔG‡) of 29.0 kcal mol−1 for the overall turnover-limiting step (TOLS) is determined. With the participation of potentially existing traces of water in the THF solvent serving as a proton shuttle, the Gibbs free energy of activation in the generation of N2 (TS-3-4-OH2) decreases to 15.1 kcal mol−1 from 26.6 kcal mol−1 (TS-3-4). To explore the structure–activity relationship in the conversion of N2O to N2, the catalytic activities of a series of Ru-H complexes (C1–C10) are investigated. The excellent linear relationships (R2 > 0.91) between the computed hydricities (ΔGH−) and ΔG‡ of TS-3-4, between the computed hydricities (ΔGH−) and the ΔG‡ of TOLS, were obtained. The utilization of hydricity as a potential parameter to predict the activity is consistent with other reports, and the current results suggest a more electron-donating ligand could lead to a more active Ru-H catalyst.

Magnesium-Modified Co3O4 Catalyst with Remarkable Performance for Toluene Low Temperature Deep Oxidation

Co3O4, MgCo2O4 and MgO materials have been synthesized using a simple co-precipitation approach and systematically characterized. The total conversion of toluene to CO2 and H2O over spinel MgCo2O4 with wormlike morphology has been investigated. Compared with single metal oxides (Co3O4 and MgO), MgCo2O4 with the highest activity has exhibited almost 100% oxidation of toluene at 255 °C. The obtained results are analogous to typical precious metal supported catalysts. The activation energy of toluene over MgCo2O4 (38.5 kJ/mol) is found to be much lower than that of Co3O4 (68.9 kJ/mol) and MgO ((87.8 kJ/mol)). Compared with the single Co and Mg metal oxide, the as-prepared spinel MgCo2O4 exhibits a larger surface area, highest absorbed oxygen and more oxygen vacancies, thus highest mobility of oxygen species due to its good redox capability. Furthermore, the samples specific surface area, low-temperature reducibility and surface adsorbed oxygenated species ratio decreased as follows: MgCo2O4 > Co3O4 > MgO; which is completely in line with the catalytic performance trends and constitute the reasons for MgCo2O4 high excellent activity towards toluene total oxidation. The overall finding supported by ab initio molecular dynamics simulations of toluene oxidation on the Co3O4 and MgCo2O4 suggest that the catalytic process follows a Mars–van Krevelen mechanism.

Hydrothermal deposition as a novel method for the preparation of Co-Mn mixed oxide catalysts supported on stainless steel meshes: application to VOC oxidation

The aim of this work was to develop a novel method for the preparation of structured Co-Mn mixed oxide catalysts: deposition on stainless steel meshes by hydrothermal synthesis. The use of meshes enabled the deposition of a thin layer of the active phase, which significantly suppressed the influence of internal diffusion. Consequently, the prepared catalysts exhibited from 48 to 114 times higher catalytic activity in ethanol oxidation than the commercial pelleted Co-Mn-Al catalyst. Moreover, we have shown that their catalytic activity correlated with the proportion of surface oxygen vacancies determined by XPS. Finally, the outstanding activity of the catalyst with Co:Mn ratio of 0.5 was ascribed to the mutual effect of high number of oxygen vacancies and exceptional redox properties.

Determining the Role of Fe-Doping on Promoting the Thermochemical Energy Storage Performance of (Mn1- x Fex )3 O4 Spinels

Mn oxides are promising materials for thermochemical heat store, but slow reoxidation of Mn₃ O₄ to Mn₂ O₃ limits efficiency. In contrast, (Mn_{1- x} Fe_x )₃ O₄ oxides show an enhanced transformation rate, but fundamental understanding of the role played by Fe cations is lacking. Here, nanoscale characterization of Fe-doped Mn oxides is performed to elucidate how Fe incorporation influences solid-state transformations. X-ray diffraction reveals the presence of two distinct spinel phases, cubic jacobsite and tetragonal hausmannite for samples with more than 10% of Fe. Chemical mapping exposes wide variation of Fe content between grains, but an even distribution within crystallites. Due to the similarities of spinels structures, high-resolution scanning transmission electron microscopy cannot discriminate unambiguously between them, but Fe-enriched crystallites likely correspond to jacobsite. In situ X-ray absorption spectroscopy confirms that increasing Fe content up to 20% boosts the reoxidation rate, leading to the transformation of Mn²⁺  in the spinel phase to Mn³⁺ in bixbyite. Extended X-ray absorption fine structure shows that FeO length is larger than MnO, but both electron energy loss spectroscopy and X-ray absorption near edge structure indicate that iron is always present as Fe³⁺  in octahedral sites. These structural modifications may facilitate ionic diffusion during bixbyite formation.

Mechanochemical Synthesis of Catalytic Materials

The mechanochemical synthesis of nanomaterials for catalytic applications is a growing research field due to its simplicity, scalability, and eco-friendliness. Besides, it provides materials with distinct features, such as nanocrystallinity, high defect concentration, and close interaction of the components in a system, which are, in most cases, unattainable by conventional routes. Consequently, this research field has recently become highly popular, particularly for the preparation of catalytic materials for various applications, ranging from chemical production over energy conversion catalysis to environmental protection. In this Review, recent studies on mechanochemistry for the synthesis of catalytic materials are discussed. Emphasis is placed on the straightforwardness of the mechanochemical route-in contrast to more conventional synthesis-in fabricating the materials, which otherwise often require harsh conditions. Distinct material properties achieved by mechanochemistry are related to their improved catalytic performance.

Superior Performance as Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cells of the Ruddlesden-Popper n = 2 Member Eu2SrCo0.50Fe1.50O7-δ with Low Cobalt Content

The effects of the contents of iron and cobalt on the crystal structure, oxygen content, thermal expansion coefficient, and electrical-electrochemical properties of materials Eu₂SrCo_xFe_2-xO_7-δ (x = 0.50 and 1.00) are reported. These oxides are well-ordered new members of the Ruddlesden-Popper series (Eu,Sr)_n+1(Co,Fe)_nO_3n+1 system with n = 2 as determined by selected area electron diffraction and high-resolution transmission electron microscopy and X-ray diffraction studies. The two materials are semiconductors of p-type, with much higher total conductivity under working conditions for the low cobalt compound, Eu₂SrCo_0.50Fe_1.50O_7-δ. Composite cathodes prepared with this oxide present much lower area-specific resistance values (0.08 Ω·cm² at 973 K in air) than composites containing Eu₂SrCo_1.00Fe_1.00O_7-δ (1.15 Ω·cm²). This significant difference is related to the much higher total conductivity and a sufficiently high content of oxygen vacancies in the Fe-rich phase. The excellent electrochemical performance of Eu₂SrCo_0.50Fe_1.50O_7-δ with low cobalt content, which shows one of the lowest area-specific resistance reported so far for a Ruddlesden-Popper oxide, makes it a good candidate for application as a cathode material for solid oxide fuel cells at intermediate temperatures in real devices.

A key step for preparing highly active Mg–Co composite oxide catalysts for N2O decomposition

The hydrothermal treatment accelerates the Mg²⁺ substitution for Co²⁺ at tetrahedral sites and thus greatly increases the activity of the catalyst.

Kinetic modeling of nitrous oxide decomposition on Fe-ZSM-5 in the presence of nitric oxide based on parameters obtained from first-principles calculations

A variety of experiments for the N₂O decomposition over Fe-ZSM-5 catalysts have been simulated in the presence and absence of small amounts of nitric oxide and water vapor.

On the reaction mechanism of MnOx/SAPO-34 bifunctional catalysts for the conversion of syngas to light olefins

Methanol is a key reaction intermediate formed on MnOx that synergistically reacts with SAPO-34 to produce light olefins.

K-Modified Co–Mn–Al Mixed Oxide—Effect of Calcination Temperature on N2O Conversion in the Presence of H2O and NOx

The effect of calcination temperature (500–700 °C) on physico-chemical properties and catalytic activity of 2 wt. % K/Co-Mn-Al mixed oxide for N2O decomposition was investigated. Catalysts were characterized by inductively coupled plasma spectroscopy (ICP), X-ray powder diffraction (XRD), temperature-programmed reduction by hydrogen (TPR-H2), temperature-programmed desorption of CO2 (TPD-CO2), temperature-programmed desorption of NO (TPD-NO), X-ray photoelectron spectrometry (XPS) and N2 physisorption. It was found that the increase in calcination temperature caused gradual crystallization of Co-Mn-Al mixed oxide, which manifested itself in the decrease in Co2+/Co3+ and Mn3+/Mn4+ surface molar ratio, the increase in mean crystallite size leading to lowering of specific surface area and poorer reducibility. Higher surface K content normalized per unit surface led to the increase in surface basicity and adsorbed NO per unit surface. The effect of calcination temperature on catalytic activity was significant mainly in the presence of NOx, as the optimal calcination temperature of 500 °C is necessary to ensure sufficient low surface basicity, leading to the highest catalytic activity. Observed NO inhibition was caused by the formation of surface mononitrosyl species bonded to tetrahedral metal sites or nitrite species, which are stable at reaction temperatures up to 450 °C and block active sites for N2O decomposition.

Atomic-Level Dispersion of Bismuth over Co3O4 Nanocrystals—Outstanding Promotional Effect in Catalytic DeN2O

A series of cobalt spinel catalysts doped with bismuth in a broad range of 0–15.4 wt % was prepared by the co-precipitation method. The catalysts were thoroughly characterized by several physicochemical methods (X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), Raman spectroscopy (µRS), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption analyzed with Brunaer-Emmett-Teller theory (N2-BET), work function measurements (WF)), as well as aberration-corrected scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS). The optimal bismuth promoter content was found to be 6.6 wt %, which remarkably enhanced the performance of the cobalt spinel catalyst, shifting the N2O decomposition (deN2O) temperature window (T50%) down from approximately 400 °C (for Co3O4) to 240 °C (for the 6.6 wt % Bi-Co3O4 catalyst). The high-resolution STEM images revealed that the high activity of the 6.6 wt % Bi-Co3O4 catalyst can be associated with an even, atomic-level dispersion (3.5 at. nm−2) of bismuth over the surface of cobalt spinel nanocrystals. The improvement in catalytic activity was accompanied by an observed increase in the work function. We concluded that Bi promoted mostly the oxygen recombination step of a deN2O reaction, thus demonstrating for the first time the key role of the atomic-level dispersion of a surface promoter in deN2O reactions.

Effect of Water Molecule on Photo-Assisted Nitrous Oxide Decomposition over Oxotitanium Porphyrin: A Theoretical Study

Water vapor has generally been recognized as an inhibitor of catalysts in nitrous oxide (N2O) decomposition because it limits the lifetime of catalytic reactors. Oxygen produced in reactions also deactivates the catalytic performance of bulk surface catalysts. Herein, we propose a potential catalyst that is tolerant of water and oxygen in the process of N2O decomposition. By applying density functional theory calculations, we investigated the reaction mechanism of N2O decomposition into N2 and O2 catalyzed by oxotitanium(IV) porphyrin (TiO-por) with interfacially bonded water. The activation energies of reaction Path A and B are compared under thermal and photo-assisted conditions. The obtained calculation results show that the photo-assisted reaction in Path B is highly exothermic and proceeds smoothly with the low activation barrier of 27.57 kcal/mol at the rate determining step. The produced O2 is easily desorbed from the surface of the catalyst, requiring only 4.96 kcal/mol, indicating the suppression of catalyst deactivation. Therefore, TiO-por is theoretically proved to have the potential to be a desirable catalyst for N2O decomposition with photo-irradiation because of its low activation barrier, water resistance, and ease of regeneration.

Bulk, Surface and Interface Promotion of Co3O4 for the Low-Temperature N2O Decomposition Catalysis

Nanocrystalline cobalt spinel has been recognized as a very active catalytic material for N2O decomposition. Its catalytic performance can be substantially modified by proper doping with alien cations with precise control of their loading and location (spinel surface, bulk, and spinel-dopant interface). Various doping scenarios for a rational design of the optimal catalyst for low-temperature N2O decomposition are analyzed in detail and the key reactivity descriptors are identified (content and topological localization of dopants, their redox vs. non-redox nature and catalyst work function). The obtained results are discussed in the broader context of the available literature data to establish general guidelines for the rational design of the N2O decomposition catalyst based on a cobalt spinel platform.

Must the Best Laboratory Prepared Catalyst Also Be the Best in an Operational Application?

Three cobalt mixed oxide deN2O catalysts, with optimal content of alkali metals (K, Cs), were prepared on a large scale, shaped into tablets, and tested in a pilot plant reactor connected to the bypassed tail gas from the nitric production plant, downstream from the selective catalytic reduction of NOx by ammonia (SCR NOx/NH3) catalyst. High efficiency in N2O removal (N2O conversion of 75–90% at 450 °C, VHSV = 11,000 m3 mbed−3 h−1) was achieved. However, a different activity order of the commercially prepared catalyst tablets compared to the laboratory prepared catalyst grains was observed. Catalytic experiments in the kinetic regime using laboratory and commercial prepared catalysts and characterization methods (XRD, TPR-H2, physisorption, and chemical analysis) were utilized to explain this phenomenon. Experimentally determined internal effectiveness factors and their general dependency on kinetic constants were evaluated to discuss the relationship between the catalyst activity in the kinetic regime and the internal diffusion limitation in catalyst tablets as well as their morphology. The theoretical N2O conversion as a function of the intrinsic kinetic constants and diffusion rate, expressed as effective diffusion coefficients, was evaluated to estimate the final catalyst performance on a large scale and to answer the question of the above article title.

Performance of C2H4 Reductant in Activated-Carbon- Supported MnOx-based SCR Catalyst at Low Temperatures

Hydrocarbons as reductants show promising results for replacing NH3 in SCR technology. Therefore, considerable interest exists for developing low-temperature (<200 °C) and environmentally friendly HC-SCR catalysts. Hence, C2H4 was examined as a reductant using activated-carbon-supported MnOx-based catalyst in low-temperature SCR operation. Its sensitivity to Mn concentration and operating temperature was parametrically studied, the results of which showed that the catalyst activity followed the order of 130 °C > 150 °C > 180 °C with an optimized Mn concentration near 3.0 wt.%. However, rapid deactivation of catalytic activity also occurred when using C2H4 as the reductant. The mechanism of deactivation was explored and is discussed herein in which deactivation is attributed to two factors. The manganese oxide was reduced to Mn3O4 during reaction testing, which contained relatively low activity compared to Mn2O3. Also, increased crystallinity of the reduced manganese and the formation of carbon black occurred during SCR reaction testing, and these constituents on the catalyst’s surface blocked pores and active sites from participating in catalytic activity.

Relationships Between Crystal, Internal Microstructures, and Physicochemical Properties of Copper-Zinc-Iron Multinary Spinel Hierarchical Nano-microspheres

Rational design and fabrication of high quality complex multicomponent spinel ferrite with specific microstructures and solar light harvestings toward CO₂ reduction and antibiotic degradation to future energetic and catalytic applications are highly desirable. In this study, novel copper-zinc-iron multinary spinel hierarchical nano-microspheres (MSHMs) with different internal structures (solid nano-microspheres, yolk-shell hollow nano-microspheres, and double-shelled hollow nano-microspheres) have been successfully developed by a facile self-templated solvothermal strategy. The morphology and structure, optical, as well as photoinduced redox reactions including interfacial charge carrier behaviors and the intrinsic relationship of structure-property between intrinsic nano-microstructures and physicochemical performance of copper-zinc-iron ferrite MSHMs composites were systematically investigated with the assistance of various on- and/or off- line physical-chemical means and deeply elucidated in terms of the research outcomes. It is demonstrated that the modification of the interior microstructures can be applied to tune the catalytic properties of multinary spinel by tailoring the temperature programming to fine control the two opposite forces of contraction (Fc) and adhesion (Fa). Among various internal microstructures, the obtained double-shelled copper-zinc-iron MSHMs exhibited the superior catalytic performance toward 8.8 and 38 μmol for H₂ and CO productions as well as 80.4% removal of sulfamethoxazole antibiotics. As evidenced from primary characterizations, for example, combined steady-state PL, ns-TAS, and Mössbauer and sequential investigations, the remarkable improvements in the catalytic activity can be primarily attributed to several crucial factors, for example, the more effective e^--h⁺ spatial separations and interfacial transfers, multiple internal light scattering, higher photonic energy harvesting and effective reactive oxygen species generation with long radical lifetimes. The current research provides new insights into the molecular design of novel copper-zinc-iron multinary spinels and the intrinsic relationship of structure-property between interior structures (e.g., different crystal texture, morphologies structures) and the physicochemical performance of the aforementioned multinary spinels.

Mesocrystalline Zn-Doped Fe3O4 Hollow Submicrospheres: Formation Mechanism and Enhanced Photo-Fenton Catalytic Performance

Uniform and magnetic recyclable mesocrystalline Zn-doped Fe₃O₄ hollow submicrospheres (HSMSs) were successfully synthesized via a simple one-pot solvothermal route and were used for efficient heterogeneous photo-Fenton catalyst. XRD, XPS, Raman spectroscopy, Mössbauer spectroscopy, SEM, HRTEM, and EDX analyses revealed that the shell of HSMSs is highly porous and assembled by oriented attachment of magnetite nanocrystal building blocks with Zn-rich surfaces. Furthermore, a possible formation mechanism of mesocrystalline hollow materials was proposed. First, Fe₃O₄ mesocrystals were assembled by oriented nanocrystals, and a Zn-rich amorphous shell grew on the surfaces. Then, Zn gradually diffused into Fe₃O₄ crystals to form Zn-doped Fe₃O₄ due to the Kirkendall effect with increasing the reaction time. Meanwhile, the inner nanocrystals would be dissolved, and outer particles would grow larger owing to the Ostwald ripening process, leading to the formation of a hollow structure with porous shell. The Zn-doped Fe₃O₄ HSMSs exhibited high and stable photo-Fenton activity for degradation of rhodamine B (RhB) and cephalexin under visible-light irradiation in the presence of H₂O₂, which results from their hollow mesocrystal structure and Zn doping. It could be easily separated and reused by an external magnetic field. The results suggested that the as-obtained magnetite hollow mesocrystals could be a promising catalyst in the photo-Fenton process.

A facile synthesis of Fe3O4/nitrogen-doped carbon hybrid nanofibers as a robust peroxidase-like catalyst for the sensitive colorimetric detection of ascorbic acid

We describe a facile synthesis of Fe₃O₄/nitrogen-doped carbon hybrid nanofibers as a robust peroxidase-like catalyst for the sensitive colorimetric detection of ascorbic acid.