Universal Approach to Direct Spatiotemporal Dynamic In Situ Optical Visualization of On-Catalyst Water Splitting Electrochemical Processes

Electrochemical reactions are the unrivaled backbone of next-generation energy storage, energy conversion, and healthcare devices. However, the real-time visualization of electrochemical reactions remains the bottleneck for fully exploiting their intrinsic potential. Herein, for the first time, a universal approach to direct spatiotemporal-dynamic in situ optical visualization of pH-based as well as specific byproduct-based electrochemical reactions is performed. As a highly relevant and impactful example, in-operando optical visualization of on-catalyst water splitting processes is performed in neutral water/seawater. HPTS (8-hydroxypyrene-1,3,6-trisulfonicacid), known for its exceptional optical capability of detecting even the tiniest pH changes allows the unprecedented "spatiotemporal" real-time visualization at the electrodes. As a result, it is unprecedentedly revealed that at a critical cathode-to-anode distance, the bulk-electrolyte "self-neutralization" phenomenon can be achieved during the water splitting process, leading to the practical realization of enhanced additive-free neutral water splitting. Furthermore, it is experimentally unveiled that at increasing electrolyte flow rates, a swift and severe inhibition of the concomitantly forming acidic and basic 'fronts', developed at anode and cathode compartments are observed, thus acting as a "buffering" mechanism. To demonstrate the universal applicability of this elegant strategy which is not limited to pH changes, the technique is extended to visualization of hypochlorite/ chlorine at the anode during electrolysis of sea water using N-(4-butanoic acid) dansylsulfonamide (BADS). Thus, a unique experimental tool that allows real-time spatiotemporal visualization and simultaneous mechanistic investigation of complex electrochemical processes is developed that can be universally extended to various fields of research.

Buckling and fracture characterization of pristine bundles of vertically aligned carbon nanotubes using quantitative in situ TEM axial compression

This work investigates the mechanical deformation and fracture characteristics of pristine bundles of vertically aligned Multi-Walled Carbon Nanotubes (MWCNT) subjected to axial compression in situ Transmission Electron Microscope (TEM). Accurate measurements of force-displacement data were collected simultaneously with real-time TEM videos of the deformation process. Two distinct regimes were observed in the force-displacement curve: (1) an initial elastic section with a linear slope, followed by (2) a transition to a force plateau at a critical buckling force. Morphological data revealed coordinated buckling of the pristine bundle, indicating strong van der Waals (VdW) forces between the nanotubes. The experimental setup measured an effective modulus of 83.9 GPa for an MWCNT bundle, which was in agreement with finite element analysis (FEA) simulations. FEA also highlighted the significant role of VdW forces in the bundle mechanical reactions. Furthermore, we identified nickel nanoparticles as key players in the fracture behavior of the bundles, acting as nucleation sites for defects. The direct mechanical measurements of MWCNT bundles provide valuable insights into their mechanical deformation and fracture behavior, while correlating it to the morphology of the bundle. Understanding these interactions at the bundle level is crucial for improving the reliability and durability of VACNTs-based components.

Cyclic Buckling Characterization of an Individual MWCNT Using Quantitative In Situ TEM Axial Compression

Carbon nanotubes (CNTs) are extremely conductive and flexible, making them ideal for applications such as flexible electronics and nanoelectromechanical systems. However, in order to properly apply them in such devices, their long-term durability must be assessed. In the present study, we demonstrate cyclic loading of a thick MWCNT (175 nm) under axial compression, observed in situ under a transmission electron microscope (TEM). The force was applied via controlled displacement, while real-time TEM videos of the deformation process were gathered to produce the morphological data. The in situ observations combined with force-displacement curves revealed the onset of buckling instabilities, and the elastic limits of the tube were assessed. The MWCNT retained its original structure even after 68 loading-unloading cycles, despite observed clues for structural distortions. The stiffness of the tube, calculated after each loading cycle, was in a 0.15 to 0.28 TPa range-comparable to the literature, which further validates the measurement set-up. These in situ tests demonstrate the resilience of CNTs to fatigue which can be correlated with the CNTs' structure. Such correlations can help tailoring CNTs' properties to specific applications.

A novel, accurate, and non-invasive liquid biopsy test to measure cellular immune responses as a tool to diagnose early-stage lung cancer: a clinical trials study

INTRODUCTION

Lung cancer remains the leading cause of death from cancer, worldwide. Developing early detection diagnostic methods, especially non-invasive methods, is a critical component to raising the overall survival rate and prognosis for lung cancer. The purpose of this study is to evaluate two protocols of a novel in vitro cellular immune response test to detect lung cancer. The test specifically quantifies the glycolysis metabolism pathway, which is a biomarker for the activation level of immune cells. It summarizes the results of two clinical trials, where each deploys a different protocol's version of this test for the detection of lung cancer. In the later clinical trial, an improved test protocol is applied.

METHOD

The test platform is based on changes in the metabolic pathways of the immune cells following their activation by antigenic stimuli associated with Lung cancer. Peripheral Blood Mononuclear Cells are loaded on a multiwell plate together with various lung tumor associated antigens and a fluorescent probe that exhibits a pH-dependent absorption shift. The acidification process in the extracellular fluid is monitored by a commercial fluorescence plate reader device in continuous reading for 3 h at 37 °C to document the fluorescent signal received from each well.

RESULTS

In the later clinical trial, an improved test protocol was applied and resulted in increased test accuracy. Specificity of the test increased to 94.0% and test sensitivity increased to 97.3% in lung cancer stage I, by using the improved protocol.

CONCLUSION

The improved protocol of the novel cellular immune metabolic response based test detects stage I and stage II of lung cancer with high specificity and sensitivity, with low material costs and fast results.

Electronic Structure Engineering of Highly-Scalable Earth-Abundant Multi-Synergized Electrocatalyst for Exceptional Overall Water Splitting in Neutral Medium

Efficient neutral water splitting may represent in future a sustainable solution to unconstrained energy requirements, but yet necessitates the development of innovative avenues for achieving the currently unmet required performances. Herein, a novel paradigm based on the combination of electronic structure engineering and surface morphology tuning of earth-abundant 3D-hierarchical binder-free electrocatalysts is demonstrated, via a scalable single-step thermal transformation of nickel substrates under sulfur environment. A temporal-evolution of the resulting 3D-nanostructured substrates is performed for the intentional enhancement of non-abundant highly-catalytic Ni³⁺ and pS_n ^2- species on the catalyst surface, concomitantly accompanied with densification of the hierarchical catalyst morphology. Remarkably, the finely engineered NiS_x catalyst synthesized via thermal-evolution for 24 h (NiS_x -24 h) exhibits an exceptionally low cell voltage of 1.59 V (lower than Pt/C-IrO₂  catalytic couple) for neutral water splitting, which represents the lowest value ever reported. The enhanced performance of NiS_x -24 h is a multi-synergized consequence of the simultaneous enrichment of oxygen and hydrogen evolution reaction catalyzing species, accompanied by an optimum electrocatalytic surface area and intrinsic high conductivity. Overall, this innovative work opens a route to engineering the active material's electronic structure/morphology, demonstrating novel Ni³⁺ /pS_n ^2- -enriched NiS_x catalysts which surpass state-of-the-art materials for neutral water splitting.

The "Bloodless" Blood Test: Intradermal Prick Nanoelectronics for the Blood Extraction-Free Multiplex Detection of Protein Biomarkers

Protein biomarkers' detection is of utmost importance for preventive medicine and early detection of illnesses. Today, their detection relies entirely on clinical tests consisting of painful, invasive extraction of large volumes of venous blood; time-consuming postextraction sample manipulation procedures; and mostly label-based complex detection approaches. Here, we report on a point-of-care (POC) diagnosis paradigm based on the application of intradermal finger prick-based electronic nanosensors arrays for protein biomarkers' direct detection and quantification down to the sub-pM range, without the need for blood extraction and sample manipulation steps. The nanobioelectronic array performs biomarker sensing by a rapid intradermal prick-based sampling of proteins biomarkers directly from the capillary blood pool accumulating at the site of the microneedle puncture, requiring only 2 min and less than one microliter of a blood sample for a complete analysis. A 1 mm long microneedle element was optimal in allowing for pain-free dermal sampling with a 100% success rate of reaching and rupturing dermis capillaries. Current common micromachining processes and top-down fabrication techniques allow the nanobioelectronic sensor arrays to provide accurate and reliable clinical diagnostic results using multiple sensing elements in each microneedle and all-in-one direct and label-free multiplex biomarkers detection. Preliminary successful clinical studies performed on human volunteers demonstrated the ability of our intradermal, in-skin, blood extraction-free detection platform to accurately detect protein biomarkers as a plausible POC detection for future replacement of today's invasive clinical blood tests. This approach can be readily extended in the future to detect other clinically relevant circulating biomarkers, such as miRNAs, free-DNAs, exosomes, and small metabolites.

Three-Dimensional Monolithically Self-Grown Metal Oxide Highly Dense Nanonetworks as Free-Standing High-Capacity Anodes for Lithium-Ion Batteries

Transition metal oxides (TMOs) have been widely studied as potential next-generation anode materials, owing to their high theoretical gravimetric capacity. However, to date, these anodes syntheses are plagued with time-consuming preparation processes, two-dimensional electrode fabrication, binder requirements, and short operational cycling lives. Here, we present a scalable single-step reagentless process for the synthesis of highly dense Mn₃O₄-based nanonetwork anodes based on a simple thermal treatment transformation of low-grade steel substrates. The monolithic solid-state chemical self-transformation of the steel substrate results in a highly dense forest of Mn₃O₄ nanowires, which transforms the electrochemically inactive steel substrate into an electrochemically highly active anode. The proposed method, beyond greatly improving the current TMO performance, surpasses state-of-the-art commercial silicon anodes in terms of capacity and stability. The three-dimensional self-standing anode exhibits remarkably high capacities (>1500 mA h/g), a stable cycle life (>650 cycles), high Coulombic efficiencies (>99.5%), fast rate performance (>1.5 C), and high areal capacities (>2.5 mA h/cm²). This novel experimental paradigm acts as a milestone for next-generation anode materials in lithium-ion batteries, and pioneers a universal method to transform different kinds of widely available, low-cost, steel substrates into electrochemically active, free-standing anodes and allows for the massive reduction of anode production complexity and costs.

Single-Step Solid-State Scalable Transformation of Ni-Based Substrates to High-Oxidation State Nickel Sulfide Nanoplate Arrays as Exceptional Bifunctional Electrocatalyst for Overall Water Splitting

Hydrogen, undoubtedly the next-generation fuel for supplying the world's energy demands, needs economically scalable bifunctional electrocatalysts for its sustainable production. Non-noble transition metal-based electrocatalysts are considered an economic solution for water splitting applications. A single-step solid-state approach for the economically scalable transformation of Ni-based substrates into single-crystalline nickel sulfide nanoplate arrays is developed. X-ray diffraction and transmission electron microscopy measurements reveal the influence of the transformation temperature on the crystal growth direction, which in turn can manipulate the chemical state at the catalyst surface. Ni-based sulfide formed at 450 °C exhibits an enhanced concentration of electrocatalytically-active Ni³⁺ at their surface and a reduced electron density around sulfur atoms, optimal for efficient H₂ production. The Ni-based sulfide electrocatalysts display exceptional electrocatalytic performance for both oxygen and hydrogen evolution, with overpotentials of 170 and 90 mV respectively. Remarkably, the two-electrode cell for overall electrolysis of alkaline water demonstrates an ultra-low cell potential of 1.46 V at 10 mA cm^-2 and 1.69 V at 100 mA cm^-2 . In addition to the exceptionally low water-splitting cell voltage, this self-standing electrocatalyst is of binderfree nature, with the electrode preparation being a low-cost and single-step process, easily scalable to industrial scales.

Depletion of Highly Abundant Protein Species from Biosamples by the Use of a Branched Silicon Nanopillar On-Chip Platform

Highly abundant serum proteins tend to mask the low- and ultralow-abundance proteins, making low-abundance species detection extremely challenging. While traditional highly abundant protein depletion techniques are effective, they suffer from nonspecific binding problems and laborious sample manipulation procedures, and the kinetics of release of current separation systems is inadequately long, causing dilution of the eluted low-abundance protein samples. Here, we introduce an on-chip light-controlled reusable platform for the direct and fast depletion of highly abundant proteins from serum biosamples. Our nanoarrays display fast and highly selective depletion capabilities, up to 99% depletion of highly abundant protein species, with no undesired depletion effects on the concentration of low-abundance protein biomarkers. Displaying an ultrahigh surface area, ∼3400 m2 g-1, alongside a light-triggerable ultrafast release, this platform allows for a high depletion performance, together with high-yield reusability capabilities. Furthermore, this nanostructured light-controlled separation device could easily be integrated with downstream analytical technologies in a single lab-on-a-chip platform.

Clinic-on-a-Needle Array toward Future Minimally Invasive Wearable Artificial Pancreas Applications

In order to reduce medical facility overload due to the rise of the elderly population, modern lifestyle diseases, or pandemics, the medical industry is currently developing point-of-care and home medical device systems. Diabetes is an incurable and lifetime disease, accountable for a significant mortality and socio-economic public health burden. Thus, tight glucose control in diabetic patients, which can prevent the onset of its late complications, is of enormous importance. Despite recent advances, the current best achievable management of glucose control is still inadequate, due to several key limitations in the system components, mainly related to the reliability of sensing components, both temporally and chemically, and the integration of sensing and delivery components in a single wearable platform, which is yet to be achieved. Thus, advanced closed-loop artificial pancreas systems able to modulate insulin delivery according to the measured sensor glucose levels, independently of patient supervision, represent a key requirement of development efforts. Here, we demonstrate a minimally invasive, transdermal, multiplex, and versatile continuous metabolites monitoring system in the subcutaneous interstitial fluid space based on a chemically modified SiNW-FET nanosensor array on microneedle elements. Using this technology, ISF-borne metabolites require no extraction and are measured directly and continuously by the nanosensors. Due to their chemical sensing mechanism, the nanosensor response is only influenced by the specific metabolite of interest, and no response is observed in the presence of potential exogenous and endogenous interferents known to seriously affect the response of current electrochemical glucose detection approaches. The 2D architecture of this platform, using a single SOI substrate as a top-down multipurpose material, resulted in a standard fabricated chip with 3D functionality. After proving the ability of the system to act as a selective multimetabolites sensor, we have implemented our platform to reach our main goal for in vivo continuous glucose monitoring of healthy human subjects. Furthermore, minor adjustments to the fabrication technique allow the on-chip integration of microinjection needle elements, which can ideally be used as a drug delivery system. Preliminary experiments on a mice animal model successfully demonstrated the single-chip capability to both monitor glucose levels as well as deliver insulin. By that, we hope to provide in the future a cost-effective and reliable wearable personalized clinical tool for patients and a strong tool for research, which will be able to perform direct monitoring of clinical biomarkers in the ISF as well as synchronized transdermal drug delivery by this single-chip multifunctional platform.

Ultrafast high-capacity capture and release of uranium by a light-switchable nanotextured surface

Nuclear power is growing in demand as a promising sustainable energy source, its most prevalent source being uranium salts. The resulting processing and transportation of uranium raise concerns regarding the environmental impact and risks for human health. Close proximity to uranium mines puts populations at higher risk for exposure due to elevated uranium concentrations. As the main form of uranium in aqueous solutions, uranyl (UO₂ ²⁺) has been the focus of many methods of uranium sieving; most fall short by being time-consuming or lacking a retrieval mechanism for the captured uranium. Here, we demonstrate the ultrafast and selective uranyl-capturing properties of aptamer-modified branched silicon nanopillar (BSiNP) arrays. Our nanostructured surfaces demonstrate an ultrahigh surface area modified with a uranyl-specific DNA aptamer, allowing for high uranyl-capturing capacity, reaching up to 550 mg g^-1. Uranyl capture is followed by the activation of a covalently bonded photoacid, causing a light-triggerable, ultrafast release. This capture-and-release cycle results in the collection of over 70% of the uranium found in the original samples within less than one hour.

Rapid Collection and Aptamer-Based Sensitive Electrochemical Detection of Soybean Rust Fungi Airborne Urediniospores

Plants are the central source of food for humans around the world. Unfortunately, plants can be negatively affected by diverse kinds of diseases that are responsible for major economic losses worldwide. Thus, monitoring plant health and early detection of pathogens are essential to reduce disease spread and facilitate effective management practices. Various detection approaches are currently practiced. These methods mainly include visual inspection and laboratory tests. Nonetheless, these methods are labor-intensive, time-consuming, expensive, and inefficient in the early stages of infection. Thus, it is extremely important to detect diseases at the early stages of the epidemic. Here, we would like to present a fast, sensitive, and reliable electrochemical sensing platform for the detection of airborne soybean rust spores. The suspected airborne soybean rust spores are first collected and trapped inside a carbon 3D electrode matrix by high-capacity air-sampling means. Then, a specific biotinylated aptamer, suitable to target specific sites of soybean rust spores is applied. This aptamer agent binds to the surface of the collected spores on the electrode. Finally, spore-bound aptamer units are incubated with a streptavidin-alkaline phosphatase agent leading to the enzymatic formation of p-nitrophenol, which is characterized by its unique electrochemical properties. Our method allows for the rapid (ca. 2 min), selective, and sensitive collection and detection of soybean rust spores (down to the limit of 100-200 collected spores per cm2 of electrode area). This method could be further optimized for its sensitivity and applied to the future multiplex early detection of various airborne plant diseases.

Optically transparent vertical silicon nanowire arrays for live-cell imaging

Programmable nano-bio interfaces driven by tuneable vertically configured nanostructures have recently emerged as a powerful tool for cellular manipulations and interrogations. Such interfaces have strong potential for ground-breaking advances, particularly in cellular nanobiotechnology and mechanobiology. However, the opaque nature of many nanostructured surfaces makes non-destructive, live-cell characterization of cellular behavior on vertically aligned nanostructures challenging to observe. Here, a new nanofabrication route is proposed that enables harvesting of vertically aligned silicon (Si) nanowires and their subsequent transfer onto an optically transparent substrate, with high efficiency and without artefacts. We demonstrate the potential of this route for efficient live-cell phase contrast imaging and subsequent characterization of cells growing on vertically aligned Si nanowires. This approach provides the first opportunity to understand dynamic cellular responses to a cell-nanowire interface, and thus has the potential to inform the design of future nanoscale cellular manipulation technologies.

Diversely Doped Uniform Silicon Nanotube Axial Heterostructures Enabled by "Dopant Reflection"

Here, we propose a novel method for the synthesis of extremely uniform, diversely doped silicon nanotube heterostructures. The method, comprising a simple two-step synthesis, exploits the use of a Ge nanowire sacrificial core upon which a multidoping axial pattern can be easily obtained, that is enclosed in an intrinsic Si shell. The Ge-Si core-shell structure is then heated to 750 °C, allowing the migration of dopant elements from the Ge core directly into the Si shell. Removal of the Ge core, via either wet or dry etch, does not impair the crystallinity of the Si shell nor its electrical characteristics, allowing for the formation of a multidoped axially patterned, conformal, and uniform Si nanotube. The precise dopant patterning allows for the extension of Si nanotube applications, which were unattainable because of the inability to precisely control the parameters and uniformity of the nanotubes while doping the structure simultaneously.

Synthesis and electrochemical performance of silicon-nanowire alloy anodes

High-capacity materials are required in order to address the environmental concerns of our modern society, ultimately leading to safe and eco-friendly high-energy batteries. Silicon-nanowire anodes (SiNWs) have the potential to significantly increase the energy density of lithium-ion batteries (LIBs). In order to improve the mechanical durability and the electrochemical performance of SiNW-anodes, we fabricated a silicon–nickel (SiNi) composite anode by electroless deposition of nickel, followed by annealing at high temperature to obtain nickel silicides of different content and composition. The morphology of SiNi-alloy anodes was examined by SEM, in situ TEM and EDS methods in order to understand how different deposition protocols affect the coating of the silicon nanowires. The formation of Ni-silicides was found to occur during thermal treatment at 900 °C. Despite the incomplete shell coverage of SiNWs composed of multiple phases and grains, the electrochemical performance of binder-free and conducting-additive-free SiNi-alloy anodes showed stable electrochemical behavior and higher capacity retention compared to the pristine SiNW anode. Li/SiNW–SiNi_x cells ran at C/2 rate for 200 reversible cycles, exhibiting 0.1%/cycle capacity loss after completion of the SEI formation.

Electroless coating of a silicon nanowires (SiNW) anode (a) followed by annealing, forms nickel silicide layer (b), which enables stable electrochemical behaviour of SiNi-alloy anode and higher capacity retention compared to the pristine SiNW anode (c).

Direct Detection of Uranyl in Urine by Dissociation from Aptamer-Modified Nanosensor Arrays

An ever-growing demand for uranium in various industries raises concern for human health of both occupationally exposed personnel and the general population. Toxicological effects related to uranium (natural, enriched, or depleted uranium) intake involve renal, pulmonary, neurological, skeletal, and hepatic damage. Absorbed uranium is filtered by the kidneys and excreted in the urine, thus making uranium detection in urine a primary indication for exposure and body burden assessment. Therefore, the detection of uranium contamination in bio-samples (urine, blood, saliva, etc.,) is of crucial importance in the field of occupational exposure and human health-related applications, as well as in nuclear forensics. However, the direct determination of uranium in bio-samples is challenging because of "ultra-low" concentrations of uranium, inherent matrix complexity, and sample diversity, which pose a great analytical challenge to existing detection methods. Here, we report on the direct, real-time, sensitive, and selective detection of uranyl ions in unprocessed and undiluted urine samples using a uranyl-binding aptamer-modified silicon nanowire-based field-effect transistor (SiNW-FET) biosensor, with a detection limit in the picomolar concentration range. The aptamer-modified SiNW-FET presented in this work enables the simple and sensitive detection of uranyl in urine samples. The experimental approach has a straight-forward implementation to other metals and toxic elements, given the availability of target-specific aptamers. Combining the high surface-to-volume ratio of SiNWs, the high affinity and selectivity of the uranyl-binding aptamer, and the distinctive sensing methodology gives rise to a practical platform, offering simple and straightforward sensing of uranyl levels in urine, suitable for field deployment and point-of-care applications.

Real-time monitoring of bacterial biofilms metabolic activity by a redox-reactive nanosensors array

BACKGROUND

Bacterial biofilms are communities of surface-associated microorganisms living in cellular clusters or micro-colonies, encapsulated in a complex matrix composed of an extracellular polymeric substance, separated by open water channels that act as a circulatory system that enable better diffusion of nutrients and easier removal of metabolic waste products. The monitoring of biofilms can provide important information on fundamental biofilm-related processes. That information can shed light on the bacterial processes and enable scientists to find ways of preventing future bacterial infections. Various approaches in use for biofilm analysis are based on microscopic, spectrochemical, electrochemical, and piezoelectrical methods. All these methods provide significant progress in understanding the bio-process related to biofilm formation and eradication, nevertheless, the development of novel approaches for the real-time monitoring of biochemical, in particular metabolic activity, of bacterial species during the formation, life and eradication of biofilms is of great potential importance.

RESULTS

Here, detection and monitoring of the metabolic activity of bacterial biofilms in high-ionic-strength solutions were enabled as a result of novel surface modification by an active redox system, composed of 9,10-dihydroxyanthracene/9,10-anthraquinone, on the oxide layer of the SiNW, yielding a chemically-gated FET array. With the use of enzymatic reactions of oxidases, metabolites can be converted to H2O2 and monitored by the nanosensors. Here, the successful detection of glucose metabolites in high-ionic-strength solutions, such as bacterial media, without pre-processing of small volume samples under different conditions and treatments, has been demonstrated. The biofilms were treated with antibiotics differing in their mechanisms of action and were compared to untreated biofilms. Further examination of biofilms under antibiotic treatment with SiNW-FET devices could shed light on the bioprocess that occurs within the biofilm. Moreover, finding proper treatment that eliminates the biofilm could be examined by the novel nanosensor as a monitoring tool.

CONCLUSIONS

To summarize, the combination of redox-reactive SiNW-FET devices with micro-fluidic techniques enables the performance of rapid, automated, and real-time metabolite detection with the use of minimal sample size, noninvasively and label-free. This novel platform can be used as an extremely sensitive tool for detection and establishing medical solutions for bacterial-biofilm eradication and for finding a proper treatment to eliminate biofilm contaminations. Moreover, the sensing system can be used as a research tool for further understanding of the metabolic processes that occur within the bacterial biofilm population.

Redox-Reactive Field-Effect Transistor Nanodevices for the Direct Monitoring of Small Metabolites in Biofluids toward Implantable Nanosensors Arrays

Chemically modified field-effect transistor (FET) nanodevices were shown to be a selective and extremely sensitive detection platform. In FET-based sensors, signal amplification and transduction is based on electrostatic gating of the nanometric semiconductor channel by analyte-receptor interactions, which measurably affect the transconductance of the device. However, chemically modified FETs must overcome several fundamental limitations before they can be effectively deployed as real-time sensors for bioevents occurring on their surface in complex biofluids. Here, we demonstrate the development of amperoFET devices for the real-time continuous monitoring of small molecular metabolites in biofluids. The surface of the nanowires is covalently modified with a redox reversible moiety, which is easily oxidized in the presence of H2O2. The reversible redox transformation of the surface-confined molecules is carried out by a hot electron injection mechanism, conducted simply by the modulation of the source-drain current through the nanoFET sensing device. By this approach, electrons may be injected by the nanowire element into the surface-confined redox moiety and thus maintain a whole-electrically actuated redox system in which the oxidation state is completely controlled by the current applied to the amperoFET system. The modulation of the source-drain current allows the control of the reduced versus oxidized redox moieties population on the nanowire surface, and this, in turn, is applied as the main sensing mechanism. At a given constant source-drain and gate voltage, the chemical perturbation exerted by the presence of chemical oxidants in the tested biofluid will lead to a measurable conductance change. Alteration in the concentration of the specific metabolite will chemically regulate the extent of perturbation applied to the redox system, which can be utilized for the quantification of the molecular metabolite of interest. These 'equilibrium'-type sensors are fully electrically operated and can be further used in implantable sensing applications.

Self-Catalyzed Vertically Aligned Carbon Nanotube-Silicon Core-Shell Array for Highly Stable, High-Capacity Lithium-Ion Batteries

Here, we report on the simple, catalyst-free preparation and application of carbon nanotube-silicon core-shell composite anodes on stainless steel. The stainless steel mesh structure acts as a self-catalyzing agent for the plasma-enhanced chemical vapor deposition (PECVD) growth of vertically aligned, dense, multiwalled carbon nanotube arrays. The carbon nanotube array then serves as a bed for silicon deposition by the decomposition of silane through chemical vapor deposition (CVD). This approach leads to the formation of highly conductive and stable composite anodes. Silicon deposition on the substrate is controlled in terms of the optimal silicon shell thickness, thus enhancing the performance of the cell. These extremely stable, binder-free composite electrodes were characterized as potential anodes in Li-ion batteries, exhibiting long cycle life (>700 cycles), high gravimetric capacity (>4000 mAh/gSi), low irreversible capacity (<10%), and high Coulombic efficiency (>99.5%). These composite anodes meet the requirements of Li-ion batteries for future portable electronics and electric vehicle applications.

Vapor Trace Collection and Direct Ultrasensitive Detection of Nitro-Explosives by 3D Microstructured Electrodes

The development of a rapid, sensitive, and selective real-time detection method for explosives traces may have an enormous impact on civilian national security, military applications, and environmental monitoring. However, real-time sensing of explosives still possesses a huge analytical hurdle, rendering explosives detection an issue of burning immediacy and an enormous current challenge in terms of research and development. Even though several explosives detection methods have been established, these approaches are typically time-consuming, need relatively large equipment, demand sample preparation, require a skilled operator, and lack the capability to do high-throughput real-time detection, thus strongly constraining their mass deployment. Here, we demonstrate the use of amino-modified carbon microfiber (μCF) working electrodes for ultrasensitive, selective, and multiplex detection of nitro-based explosives. Furthermore, our sensing method works at high sampling rates by a single electrode in a single detection cycle. We hereby present the first demonstration of porous μCF electrodes used for the simultaneous collection/preconcentration of explosive molecular species through direct air sampling, followed by the electrochemical detection of the surface adsorbed electroactive species. Our chemically modified μCF electrodes allow straightforward vapor-phase detection and discrimination of multiple nitro-based explosives directly from collected air samples. Hence, our sensing approach has been shown highly effective in the ultratrace detection of nitro-based explosives, under real-world conditions.

Light-Controlled Selective Collection-and-Release of Biomolecules by an On-Chip Nanostructured Device

The analysis of biosamples, e.g., blood, is a ubiquitous task of proteomics, genomics, and biosensing fields; yet, it still faces multiple challenges, one of the greatest being the selective separation and detection of target proteins from these complex biosamples. Here, we demonstrate the development of an on-chip light-triggered reusable nanostructured selective and quantitative protein separation and preconcentration platform for the direct analysis of complex biosamples. The on-chip selective separation of required protein analytes from raw biosamples is performed using antibody-photoacid-modified Si nanopillars vertical arrays (SiNPs) of ultralarge binding surface area and enormously high binding affinity, followed by the light-controlled rapid release of the tightly bound target proteins in a controlled liquid media. Two important experimental observations are presented: (1) the first demonstration on the control of biological reaction binding affinity by the nanostructuring of the capturing surface, leading to highly efficient protein collection capabilities, and (2) the light-triggered switching of the highly sticky binding surfaces into highly reflective nonbinding surfaces, leading to the rapid and quantitative release of the originally tightly bound protein species. Both of these two novel behaviors were theoretically and experimentally investigated. Importantly, this is the first demonstration of a three-dimensional (3D) SiNPs on-chip filter with ultralarge binding surface area and reversible light-controlled quantitative release of adsorbed biomolecules for direct purification of blood samples, able to selectively collect and separate specific low abundant proteins, while easily removing unwanted blood components (proteins, cells) and achieving desalting results, without the requirement of time-consuming centrifugation steps, the use of desalting membranes, or affinity columns.

Cellular Metabolomics by a Universal Redox-Reactive Nanosensors Array: From the Cell Level to Tumor-on-a-Chip Analysis

Although biosensors based on nanowires-field effect transistor were proved extraordinarily efficient in fundamental applications, screening of charges due to the high-ionic strength of most physiological solutions imposes severe limitations in the design of smart, "real-time" sensors, as the biosample solution has to be previously desalted. This work describes the development of a novel nanowire biosensor that performs extracellular real-time multiplex sensing of small molecular metabolites, the true indicators of the body's chemistry machinery, without any preprocessing of the biosample. Unlike other nanoFET devices that follow direct binding of analytes to their surfaces, our nanodevice acts by sensing the oxidation state of redox-reactive chemical species bound to its surface. The device's surface array is chemically modified with a reversible redox molecular system that is sensitive to H₂O₂ down to 100 nM, coupled with a suite of corresponding oxidase enzymes that convert target metabolites to H₂O₂, enabling the direct prompt analysis of complex biosamples. This modality was successfully demonstrated for the real-time monitoring of cancer cell samples' metabolic activity and evaluating chemotherapeutic treatment options for cancer. This distinctive system displays ultrasensitive, selective, noninvasive, multiplex, real-time, label-free, and low-cost sensing of small molecular metabolites in ultrasmall volumes of complex biosamples, in the single-microliter scale, placing our technology at the forefront of this cutting-edge field.

Direct and Selective Electrochemical Vapor Trace Detection of Organic Peroxide Explosives via Surface Decoration

The ability to detect traces of highly energetic explosive materials sensitively, selectively, accurately, and rapidly could be of enormous benefit to civilian national security, military applications, and environmental monitoring. Unfortunately, the detection of explosives still poses a largely unmet arduous analytical problem, making their detection an issue of burning immediacy and a massive current challenge in terms of research and development. Although numerous explosive detection approaches have been developed, these methods are usually time-consuming, require bulky equipment, tedious sample preparation, a trained operator, cannot be miniaturized, and lack the ability to perform automated real-time high-throughput analysis, strongly handicapping their mass deployment. Here, we present the first demonstration of the "direct" electrochemical approach for the sensitive, selective, and rapid vapor trace detection of TATP and HMTD, under ambient conditions, unaffected by the presence of oxygen and hydrogen peroxide species, down to concentrations lower than 10 ppb. The method is based on the use of Ag-nanoparticles-decorated carbon microfibers air-collecting electrodes (μCF), which allow for the selective direct detection of the organic peroxide explosives, through opening multiple redox routes, not existent in the undecorated carbon electrodes. Finally, we demonstrate the direct and rapid detection of TATP and HMTD explosive species from real-world air samples.

Large-Scale Self-Catalyzed Spongelike Silicon Nano-Network-Based 3D Anodes for High-Capacity Lithium-Ion Batteries

Here, we report on the large-scale one-step preparation, characterization, and application of three-dimensional spongelike silicon alloy composite anodes, based on the catalyst-free growth of porous silicon nanonetworks directly onto highly conductive and flexible open-structure stainless steel current collectors. By the use of a key hydrofluoric-acid-based chemical pretreatment process, the originally noncatalytic stainless steel matrix becomes nanoporous and highly self-catalytic, thus greatly promoting the formation of a silicon spongelike network at unexpectedly low growth temperatures, 380-460 °C. Modulation of this unique chemical pretreatment allows control over the morphology and loading properties of the resulting silicon network. The spongelike silicon network growth is capable of completely filling the openings of the three-dimensional stainless steel substrates, thus allowing full control over the active material loading, while conserving high mechanical and chemical stabilities. Furthermore, extremely high silicon loadings are reached because of the supercatalytic nanoporous nature of the chemically treated stainless steel substrates (0.5-20 mg/cm²). This approach leads to the realization of highly electrically conductive Si-stainless steel composite anodes, due to the formation of silicon-network-to-stainless-steel contact sections composed of highly conductive metal silicide alloys, thus improving the electrical interface and mechanical stability between the silicon active network and the highly conductive metal current collector. More importantly, our one-step cost-effective growth approach allows the large-scale preparation of highly homogeneous ultrathin binder-free anodes, up to 2 m long, using a home-built CVD setup. Finally, we made use of these novel anodes for the assembly of Li-ion batteries exhibiting stable cycle life (cycled for over 500 cycles with <50% capacity loss at 0.1 mA), high gravimetric capacity (>3500 mA h/g_Si at 0.1 mA/cm²), low irreversible capacity (<10%), and high Coulombic efficiency (>99.5%). Notably, these Si spongelike composite anodes of novel architecture meet the requirements of lithium batteries for future portable and electric-vehicle applications.

Shape induced sorting via rim-to-rim complementarity in the formation of pillar[5, 6]arene-based supramolecular organogels

The first two-component rim-to-rim pillar[6]arene-based supramolecular organogels were prepared. Shape complementarity was found to be an important determinant in the formation of such gels which also show shape-induced sorting in their formation.

Pillararene-Based Two-Component Thixotropic Supramolecular Organogels: Complementarity and Multivalency as Prominent Motifs

Rationally designed two-component supramolecular organogels based on multiple chemical interactions between percarboxylato- and peramino-pillararenes are described. Mixing low concentration solutions (<1 % w/v) of decacarboxylato-pillar[5]arene (1) with decaamino-pillar[5]arenes (2 b-d) affords, rapidly and without heating, organogels displaying an exceptional combination of properties. These supramolecular organogels, the characteristics of which are tunable, were found to be thixotropic and thermally stable, with T_gel values in some cases exceeding the boiling point of the embedded solvent. It is demonstrated that both structural complementarity and multivalency are important determinants in the gelation process of these attractive soft materials.

Novel non-invasive early detection of lung cancer using liquid immunobiopsy metabolic activity profiles

Lung cancer is the leading cause of cancer death worldwide. Survival is largely dependent on the stage of diagnosis: the localized disease has a 5-year survival greater than 55%, whereas, for spread tumors, this rate is only 4%. Therefore, the early detection of lung cancer is key for improving prognosis. In this study, we present an innovative, non-invasive, cancer detection approach based on measurements of the metabolic activity profiles of immune system cells. For each Liquid ImmunoBiopsy test, a 384 multi-well plate is loaded with freshly separated PBMCs, and each well contains 1 of the 16 selected stimulants in several increasing concentrations. The extracellular acidity is measured in both air-open and hermetically-sealed states, using a commercial fluorescence plate reader, for approximately 1.5 h. Both states enable the measurement of real-time accumulation of 'soluble' versus 'volatile' metabolic products, thereby differentiating between oxidative phosphorylation and aerobic glycolysis. The metabolic activity profiles are analyzed for cancer diagnosis by machine-learning tools. We present a diagnostic accuracy study, using a multivariable prediction model to differentiate between lung cancer and control blood samples. The model was developed and tested using a cohort of 200 subjects (100 lung cancer and 100 control subjects), yielding 91% sensitivity and 80% specificity in a 20-fold cross-validation. Our results clearly indicate that the proposed clinical model is suitable for non-invasive early lung cancer diagnosis, and is indifferent to lung cancer stage and histological type.

Controlled Formation of Radial Core-Shell Si/Metal Silicide Crystalline Heterostructures

The highly controlled formation of "radial" silicon/NiSi  core-shell nanowire heterostructures has been demonstrated for the first time. Here, we investigated the "radial" diffusion of nickel atoms into crystalline nanoscale silicon pillar 11 cores, followed by nickel silicide phase formation and the creation of a well-defined shell structure. The described approach is based on a two-step thermal process, which involves metal diffusion at low temperatures in the range of 200-400 °C, followed by a thermal curing step at a higher temperature of 400 °C. In-depth crystallographic analysis was performed by nanosectioning the resulting silicide-shelled silicon nanopillar heterostructures, giving us the ability to study in detail the newly formed silicide shells. Remarkably, it was observed that the resulting silicide shell thickness has a self-limiting behavior, and can be tightly controlled by the modulation of the initial diffusion-step temperature. In addition, electrical measurements of the core-shell structures revealed that the resulting shells can serve as an embedded conductive layer in future optoelectronic applications. This research provides a broad insight into the Ni silicide "radial" diffusion process at the nanoscale regime, and offers a simple approach to form thickness-controlled metal silicide shells in the range of 5-100 nm around semiconductor nanowire core structures, regardless the diameter of the nanowire cores. These high quality Si/NiSi core-shell nanowire structures will be applied in the near future as building blocks for the creation of utrathin highly conductive optically transparent top electrodes, over vertical nanopillars-based solar cell devices, which may subsequently lead to significant performance improvements of these devices in terms of charge collection and reduced recombination.

Multicolor Spectral-Specific Silicon Nanodetectors based on Molecularly Embedded Nanowires

Silicon-based photodetectors cannot distinguish between different wavelengths. Therefore, these detectors relay on color-specific filters to achieve color separation. Color filters add complexity to color sensitive device fabrication, and hinder miniaturization of such devices. Here, we report an ultrasmall (as small as ∼20 nm by 300 nm), red-green-blue-violet (RGBV) filter-free spectrally gated field effect transistor (SGFET) detectors. These photodetectors are based on organic-silicon nanowire hybrid FET devices, capable of detecting specific visible wavelength spectrum with full width at half-maxima (fwhm) under 100 nm. Each SGFET is controlled by a distinctive RGBV spectral range, according to its specific organic fluorophore functionalization. The spectral-specific RGBV detection is accomplished via covalent attachment of different fluorophores. The fluorophore molecules inject electrons into the nanowire structure as a result of light absorption at the appropriate RGBV spectral range. These photoinduced electrons modify the occupancies of the oxide's surface states, shifting the device threshold voltage, thus changing its conductivity, and functioning as a negative stress bias in a p-type SiNW FETs. A positive biasing can be achieved via UV light-induced ionization, which leads to detrapping and translocation of electrons at the oxide layer. Furthermore, a novel theoretical model on the mechanism of action of these devices was developed. Also, we show that suspended SGFETs can function as nonvolatile memory elements, which unlike fast-relaxing on-surface SGFETs, can store discrete "on" (RGBV illumination) and "off" (UV illumination) states for several days at ambient conditions. We also demonstrate a unique single-nanowire multicolor photodetector, enabling in principle a broad spectral detection over a single silicon nanowire element. These highly compact, spectral-controlled nanodevices have the potential to serve in various future novel optoelectric applications.

Nanodicing Single Crystalline Silicon Nanowire Arrays

Here, we demonstrate a novel method for the production of single-crystal Si nanowire arrays based on the top-down carving of Si-nanowall structures from a donor substrate, and their subsequent controlled and selective harvesting into a sacrificial solid material block. Nanosectioning of the nanostructures-embedding block by ultramicrotome leads to the formation of size, shape, and orientation-controlled high quality nanowire arrays. Additionally, we introduce a novel approach that enables transferring the nanowire arrays to any acceptor substrate, while preserving their orientation, and placing them on defined locations. Furthermore, crystallographic analysis and electrical measurements were performed, proving that the quality of the sectioned nanowires, which derive from their original crystalline donor substrate, are remarkably preserved.

Antigen-Dissociation from Antibody-Modified Nanotransistor Sensor Arrays as a Direct Biomarker Detection Method in Unprocessed Biosamples

The detection of biomolecules is critical for a wide spectrum of applications in life sciences and medical diagnosis. Nonetheless, biosamples are highly complex solutions, which contain an enormous variety of biomolecules, cells, and chemical species. Consequently, the intrinsic chemical complexity of biosamples results in a significant analytical background noise and poses an immense challenge to any analytical measurement, especially when applied without prior efficient separation and purification steps. Here, we demonstrate the application of antigen-dissociation regime, from antibody-modified Si-nanowire sensors, as a simple and effective direct sensing mechanism of biomarkers of interest in complex biosamples, such as serum and untreated blood, which does not require ex situ time-consuming biosample manipulation steps, such as centrifugation, filtering, preconcentration, and desalting, thus overcoming the detrimental Debye screening limitation of nanowire-based biosensors. We found that two key parameters control the capability to perform quantitative biomarkers analysis in biosamples: (i) the affinity strength (k_off rate) of the antibody-antigen recognition pair, which dictates the time length of the high-affinity slow dissociation subregime, and (ii) the "flow rate" applied during the solution exchange dissociation step, which controls the time width of the low-affinity fast-dissociation subregime. Undoubtedly, this is the simplest and most convenient approach for the SiNW FET-based detection of antigens in complex untreated biosamples. The lack of ex situ biosample manipulation time-consuming processes enhances the portability of the sensing platform and reduces to minimum the required volume of tested sample, as it allows the direct detection of untreated biosamples (5-10 μL blood or serum), while readily reducing the detection cycle duration to less than 5 min, factors of great importance in near-future point-of-care medical applications. We believe this is the first ever reported demonstration on the real-time, direct label-free sensing of biomarkers from untreated blood samples, using SiNW-based FET devices, while not compromising the ultrasensitive sensing capabilities inherent to these devices.

Monolithic integration of a silicon nanowire field-effect transistors array on a complementary metal-oxide semiconductor chip for biochemical sensor applications

We present a monolithic complementary metal-oxide semiconductor (CMOS)-based sensor system comprising an array of silicon nanowire field-effect transistors (FETs) and the signal-conditioning circuitry on the same chip. The silicon nanowires were fabricated by chemical vapor deposition methods and then transferred to the CMOS chip, where Ti/Pd/Ti contacts had been patterned via e-beam lithography. The on-chip circuitry measures the current flowing through each nanowire FET upon applying a constant source-drain voltage. The analog signal is digitized on chip and then transmitted to a receiving unit. The system has been successfully fabricated and tested by acquiring I-V curves of the bare nanowire-based FETs. Furthermore, the sensing capabilities of the complete system have been demonstrated by recording current changes upon nanowire exposure to solutions of different pHs, as well as by detecting different concentrations of Troponin T biomarkers (cTnT) through antibody-functionalized nanowire FETs.

Cavity-Assisted Manipulation of Freely Rotating Silicon Nanorods in High Vacuum

Optical control of nanoscale objects has recently developed into a thriving field of research with far-reaching promises for precision measurements, fundamental quantum physics and studies on single-particle thermodynamics. Here, we demonstrate the optical manipulation of silicon nanorods in high vacuum. Initially, we sculpture these particles into a silicon substrate with a tailored geometry to facilitate their launch into high vacuum by laser-induced mechanical cleavage. We manipulate and trace their center-of-mass and rotational motion through the interaction with an intense intracavity field. Our experiments show that the anisotropy of the nanorotors leads to optical forces that are three times stronger than on silicon nanospheres of the same mass. The optical torque experienced by the spinning rods will enable cooling of the rotational motion and torsional optomechanics in a dissipation-free environment.

Manipulating and Monitoring On-Surface Biological Reactions by Light-Triggered Local pH Alterations

Significant research efforts have been dedicated to the integration of biological species with electronic elements to yield smart bioelectronic devices. The integration of DNA, proteins, and whole living cells and tissues with electronic devices has been developed into numerous intriguing applications. In particular, the quantitative detection of biological species and monitoring of biological processes are both critical to numerous areas of medical and life sciences. Nevertheless, most current approaches merely focus on the "monitoring" of chemical processes taking place on the sensing surfaces, and little efforts have been invested in the conception of sensitive devices that can simultaneously "control" and "monitor" chemical and biological reactions by the application of on-surface reversible stimuli. Here, we demonstrate the light-controlled fine modulation of surface pH by the use of photoactive molecularly modified nanomaterials. Through the use of nanowire-based FET devices, we showed the capability of modulating the on-surface pH, by intensity-controlled light stimulus. This allowed us simultaneously and locally to control and monitor pH-sensitive biological reactions on the nanodevices surfaces, such as the local activation and inhibition of proteolytic enzymatic processes, as well as dissociation of antigen-antibody binding interactions. The demonstrated capability of locally modulating the on-surface effective pH, by a light stimuli, may be further applied in the local control of on-surface DNA hybridization/dehybridization processes, activation or inhibition of living cells processes, local switching of cellular function, local photoactivation of neuronal networks with single cell resolution and so forth.

Tissue-like Silicon Nanowires-Based Three-Dimensional Anodes for High-Capacity Lithium Ion Batteries

Here, we report on the scalable synthesis and characterization of novel architecture three-dimensional (3D) high-capacity amorphous silicon nanowires (SiNWs)-based anodes with focus on studying their electrochemical degradation mechanisms. We achieved an unprecedented combination of remarkable performance characteristics, high loadings of 3-15 mAh/cm(2), a very low irreversible capacity (10% for the 3-4 mAh/cm(2) anodes), current efficiency greater than 99.5%, cycle stability (both in half cells and a LiFePO4 battery), a total capacity of 457 mAh/cm(2) over 204 cycles and fast charge-discharge rates (up to 2.7C at 20 mA/cm(2)). These SiNWs-based binder-free 3D anodes have been cycled for over 200 cycles, exhibiting a stable cycle life. Notably, it was found that the growth of the continuous SEI layer thickness, and its concomitant increase in resistivity, represents the major reason for the observed capacity loss of the SiNWs-based anodes. Importantly, these NWs-based anodes of novel architecture meet the requirements of lithium batteries for future portable, and electric-vehicle, applications.

Probing the interactions of intrinsically disordered proteins using nanoparticle tags

The structural plasticity of intrinsically disordered proteins serves as a rich area for scientific inquiry. Such proteins lack a fix three-dimensional structure but can interact with multiple partners through numerous weak bonds. Nevertheless, this intrinsic plasticity possesses a challenging hurdle in their characterization. We underpin the intermolecular interactions between intrinsically disordered neurofilaments in various hydrated conditions, using grafted gold nanoparticle (NP) tags. Beyond its biological significance, this approach can be applied to modify the surface interaction of NPs for the creation of future tunable "smart" hybrid biomaterials.

Light-emitting self-assembled peptide nucleic acids exhibit both stacking interactions and Watson-Crick base pairing

The two main branches of bionanotechnology involve the self-assembly of either peptides or DNA. Peptide scaffolds offer chemical versatility, architectural flexibility and structural complexity, but they lack the precise base pairing and molecular recognition available with nucleic acid assemblies. Here, inspired by the ability of aromatic dipeptides to form ordered nanostructures with unique physical properties, we explore the assembly of peptide nucleic acids (PNAs), which are short DNA mimics that have an amide backbone. All 16 combinations of the very short di-PNA building blocks were synthesized and assayed for their ability to self-associate. Only three guanine-containing di-PNAs-CG, GC and GG-could form ordered assemblies, as observed by electron microscopy, and these di-PNAs efficiently assembled into discrete architectures within a few minutes. The X-ray crystal structure of the GC di-PNA showed the occurrence of both stacking interactions and Watson-Crick base pairing. The assemblies were also found to exhibit optical properties including voltage-dependent electroluminescence and wide-range excitation-dependent fluorescence in the visible region.

Morphological and chemical stability of silicon nanostructures and their molecular overlayers under physiological conditions: towards long-term implantable nanoelectronic biosensors

Background

The detection of biological and chemical species is of key importance to numerous areas of medical and life sciences. Therefore, a great interest exists in developing new, rapid, miniature, biocompatible and highly sensitive sensors, capable to operate under physiological conditions and displaying long-term stabilities (e.g. in-body implantable sensors). Silicon nanostructures, nanowires and nanotubes, have been extensively explored as building blocks for the creation of improved electrical biosensing devices, by virtue of their remarkably high surface-to-volume ratios, and have shown exceptional sensitivity for the real time label-free detection of molecular species adsorbed on their surfaces, down to the sensitivity of single molecules.

Yet, till this date, almost no rigorous studies have been performed on the temporal morphological stability of these nanostructures, and their resulting electrical devices, under physiological conditions (e.g. serum, blood), as well as on the chemical stability of the molecular recognition over-layers covering these structures.

Results

Here, we present systematic time-resolved results on the morphological stability of bare Si nanowire building blocks, as well on the chemical stability of siloxane-based molecular over-layers, under physiological conditions. Furthermore, in order to overcome the observed short-term morpho-chemical instabilities, we present on the chemical passivation of the Si nanostructures by thin metal oxide nanoshells, in the range of 3–10 nm. The thickness of the metal oxide layer influences on the resulting electrical sensitivity of the fabricated FETs (field effect transistors), with an optimum thickness of 3–4 nm.

Conclusions

The core-shell structures display remarkable long-term morphological stability, preventing both, the chemical hydrolytic dissolution of the silicon under-structure and the concomitant loss of the siloxane-based chemical over-layers, for periods of at least several months. Electrical devices constructed from these nanostructures display excellent electrical characteristics and detection sensitivities, with exceptionally high morphological and functional stabilities. These results pave the road for the creation of long-term implantable biosensing devices in general, and nanodevices in particular.

Nanobiotechnology: synthetic biology meets materials science

Nanotechnology, the area of science focused on the control of matter in the nanometer scale, allows ground-breaking changes of the fundamental properties of matter that are often radically different compared to those exhibited by the bulk counterparts. In view of the fact that dimensionality plays a key role in determining the qualities of matter, the realization of the great potential of nanotechnology has opened the door to other disciplines such as life sciences and medicine, where the merging between them offers exciting new applications, along with basic science research. The application of nanotechnology in life sciences, nanobiotechnology, is now having a profound impact on biological circuit design, bioproduction systems, synthetic biology, medical diagnostics, disease therapy and drug delivery. This special issue is dedicated to the overview of how we are learning to control biopolymers and biological machines at the molecular- and nanoscale. In addition, it covers far-reaching progress in the design and synthesis of nanoscale materials, thus enabling the construction of integrated systems in which the component blocks are comparable in size to the chemical and biological entities under investigation.

Optically-gated self-calibrating nanosensors: monitoring pH and metabolic activity of living cells

Quantitative detection of biological and chemical species is critical to numerous areas of medical and life sciences. In this context, information regarding pH is of central importance in multiple areas, from chemical analysis, through biomedical basic studies and medicine, to industry. Therefore, a continuous interest exists in developing new, rapid, miniature, biocompatible and highly sensitive pH sensors for minute fluid volumes. Here, we present a new paradigm in the development of optoelectrical sensing nanodevices with built-in self-calibrating capabilities. The proposed electrical devices, modified with a photoactive switchable molecular recognition layer, can be optically switched between two chemically different states, each having different chemical binding constants and as a consequence affecting the device surface potential at different extents, thus allowing the ratiometric internal calibration of the sensing event. At each point in time, the ratio of the electrical signals measured in the ground and excited states, respectively, allows for the absolute concentration measurement of the molecular species under interest, without the need for electrical calibration of individual devices. Furthermore, we applied these devices for the real-time monitoring of cellular metabolic activity, extra- and intracellularly, as a potential future tool for the performance of basic cell biology studies and high-throughput personalized medicine-oriented research, involving single cells and tissues. This new concept can be readily expanded to the sensing of additional chemical and biological species by the use of additional photoactive switchable receptors. Moreover, this newly demonstrated coupling between surface-confined photoactive molecular species and nanosensing devices could be utilized in the near future in the development of devices of higher complexity for both the simultaneous control and monitoring of chemical and biological processes with nanoscale resolution control.

Nanotechnology meets electrophysiology

Recording of electrical signals from electrogenic cells is an essential aspect to many areas, ranging from fundamental biophysical studies of the function of the brain and heart, through medical monitoring and intervention. Over the past decades, these studies have been primarily carried out by various well-established techniques that have greatly advanced the field, yet pose handicapping technical limitations. Nanotechnology allows the fabrication of devices small enough to enable recording of single cells, and even single neurites. The rise in knowledge in controlling nanostructures allows their tailoring to match cellular components, thus offering high level of interfacing to single cells. We will cover the latest developments in electrophysiology, applying new nanotechnology-based approaches for cellular electrical recordings, both extracellularly and intracellularly.

Biorecognition layer engineering: overcoming screening limitations of nanowire-based FET devices

Detection of biological species is of great importance to numerous areas of medical and life sciences from the diagnosis of diseases to the discovery of new drugs. Essential to the detection mechanism is the transduction of a signal associated with the specific recognition of biomolecules of interest. Nanowire-based electrical devices have been demonstrated as a powerful sensing platform for the highly sensitive detection of a wide-range of biological and chemical species. Yet, detecting biomolecules in complex biosamples of high ionic strength (>100 mM) is severely hampered by ionic screening effects. As a consequence, most of existing nanowire sensors operate under low ionic strength conditions, requiring ex situ biosample manipulation steps, that is, desalting processes. Here, we demonstrate an effective approach for the direct detection of biomolecules in untreated serum, based on the fragmentation of antibody-capturing units. Size-reduced antibody fragments permit the biorecognition event to occur in closer proximity to the nanowire surface, falling within the charge-sensitive Debye screening length. Furthermore, we explored the effect of antibody surface coverage on the resulting detection sensitivity limit under the high ionic strength conditions tested and found that lower antibody surface densities, in contrary to high antibody surface coverage, leads to devices of greater sensitivities. Thus, the direct and sensitive detection of proteins in untreated serum and blood samples was effectively performed down to the sub-pM concentration range without the requirement of biosamples manipulation.

Si nanowires forest-based on-chip biomolecular filtering, separation and preconcentration devices: nanowires do it all

The development of efficient biomolecular separation and purification techniques is of critical importance in modern genomics, proteomics, and biosensing areas, primarily due to the fact that most biosamples are mixtures of high diversity and complexity. Most of existent techniques lack the capability to rapidly and selectively separate and concentrate specific target proteins from a complex biosample, and are difficult to integrate with lab-on-a-chip sensing devices. Here, we demonstrate the development of an on-chip all-SiNW filtering, selective separation, desalting, and preconcentration platform for the direct analysis of whole blood and other complex biosamples. The separation of required protein analytes from raw biosamples is first performed using a antibody-modified roughness-controlled SiNWs (silicon nanowires) forest of ultralarge binding surface area, followed by the release of target proteins in a controlled liquid media, and their subsequent detection by supersensitive SiNW-based FETs arrays fabricated on the same chip platform. Importantly, this is the first demonstration of an all-NWs device for the whole direct analysis of blood samples on a single chip, able to selectively collect and separate specific low abundant proteins, while easily removing unwanted blood components (proteins, cells) and achieving desalting effects, without the requirement of time-consuming centrifugation steps, the use of desalting or affinity columns. Futhermore, we have demonstrated the use of our nanowire forest-based separation device, integrated in a single platform with downstream SiNW-based sensors arrays, for the real-time ultrasensitive detection of protein biomarkers directly from blood samples. The whole ultrasensitive protein label-free analysis process can be practically performed in less than 10 min.