Probing the Oxygen Reduction Reaction Active Sites over Nitrogen-Doped Carbon Nanostructures (CNx) in Acidic Media Using Phosphate Anion

Why Does the Performance of Nitrogen-Doped Carbon Electrocatalysts Decrease in Acidic Conditions?

Nitrogen-doped carbon has emerged as a promising low-cost and durable alternative to platinum catalysts for the oxygen reduction reaction (ORR) in fuel cells. However, its catalytic activity decreases significantly in acidic electrolytes, limiting the practical applications. Here, we report the degradation mechanisms of nitrogen-doped carbon catalysts, focusing on the acid-base equilibrium of pyridinic nitrogen (pyri-N), which serves the primary active site. We found that the electrochemical hydrogenation of pyri-N to pyri-NH, coupled with oxygen adsorption, is a critical process. Although this reaction occurs at higher potentials in basic electrolytes, it shifts to lower potentials in acidic environments due to the protonation and stabilization of pyri-N. These results demonstrate that the decrease of the catalytic activity in acidic electrolytes is tied to the basicity of pyri-N. By controlling the basicity of pyri-N, specifically its pKa, a guideline for enhancing the ORR and other electrode reactions has been established.

Probing the Active Nitrogen Species in Nitrogen-Doped Carbon Nanozymes for Enhanced Oxidase-Like Activity

Nitrogen doping emerges as a potent approach to enhance the oxidase-like activity of carbon nanozymes. However, the unclear knowledge of the active nitrogen species within nitrogen-doped carbon nanozymes hinders the advancement of high-performance carbon nanozymes. Herein, a group of nitrogen-doped carbon (N/C) nanozymes with controllable nitrogen dopants are successfully synthesized via a dicyandiamide-assisted pyrolysis method. The intrinsic connection between different nitrogen configurations (pyridinic N, pyrrolic N, and graphitic N) in N/C nanozymes and the oxidase-like performance are experimentally investigated. The results confirm pyridinic N is the active nitrogen species in N/C nanozymes for enhanced oxidase-like activity. Theoretical calculations further reveal the potential regulatory mechanism is pyridinic N can increase the local charge density of neighboring carbon atoms and accelerate the adsorption and activation of molecular oxygen. Notably, the optimized N/C nanozyme with the highest pyridinic N ratio presents impressive oxidase-like performance, surpassing most of the previously reported oxidase-like materials. Moreover, the optimized N/C nanozyme exhibits excellent antibacterial properties and can be easily incorporated into common medical and hygiene products to give them spontaneous antibacterial properties. The work will facilitate the rational design of carbon nanozymes with high-performance oxidase-like activity for applications in the antibacterial field.

Carbon encapsulated nanoparticles: materials science and energy applications

The technological implementation of electrochemical energy conversion and storage necessitates the acquisition of high-performance electrocatalysts and electrodes. Carbon encapsulated nanoparticles have emerged as an exciting option owing to their unique advantages that strike a high-level activity-stability balance. Ever-growing attention to this unique type of material is partly attributed to the straightforward rationale of carbonizing ubiquitous organic species under energetic conditions. In addition, on-demand precursors pave the way for not only introducing dopants and surface functional groups into the carbon shell but also generating diverse metal-based nanoparticle cores. By controlling the synthetic parameters, both the carbon shell and the metallic core are facilely engineered in terms of structure, composition, and dimensions. Apart from multiple easy-to-understand superiorities, such as improved agglomeration, corrosion, oxidation, and pulverization resistance and charge conduction, afforded by the carbon encapsulation, potential core-shell synergistic interactions lead to the fine-tuning of the electronic structures of both components. These features collectively contribute to the emerging energy applications of these nanostructures as novel electrocatalysts and electrodes. Thus, a systematic and comprehensive review is urgently needed to summarize recent advancements and stimulate further efforts in this rapidly evolving research field.

Estimation of the electrochemical active site density of a metal-free carbon-based catalyst using phosphomolybdate (PMo12) as an adsorbate

A method to estimate the electrochemical active site density (SD) of carbon (C) and nitrogen-doped carbon (N/C-900) using phosphomolybdate (PMo12) as a probe molecule is proposed. The complete coverage of the active sites by the probe molecules is established irrespective of the adsorbate concentration (1, 5, or 10 mM), potential cycling (1 or 10 cycles) and cleaning time (2, 5, or 10 min). A conversion factor derived from a smooth and polished glassy carbon disk of known geometrical area is used to estimate the electrochemical active surface area (ECSA) of the carbon catalyst from the SD. The relatively higher SD values estimated from DC voltammetry than from large-amplitude Fourier-transform alternating-current voltammetry (FTacV) is indicative of the contribution of capacitive charge in the former. Adsorbed probe molecules (PMo12) can readily be desorbed from the catalyst surface by cycling the electrode to lower potentials. The active site density of N/C-900 (∼0.36 × 1019 sites g-1) is higher than that of C (∼0.17 × 1019 sites g-1).

Catalytic Oxidation of Benzene over Atomic Active Site AgNi/BCN Catalysts at Room Temperature

Benzene is the typical volatile organic compound (VOC) of indoor and outdoor air pollution, which harms human health and the environment. Due to the stability of their aromatic structure, the catalytic oxidation of benzene rings in an environment without an external energy input is difficult. In this study, the efficient degradation of benzene at room temperature was achieved by constructing Ag and Ni bimetallic active site catalysts (AgNi/BCN) supported on boron-carbon-nitrogen aerogel. The atomic-scale Ag and Ni are uniformly dispersed on the catalyst surface and form Ag/Ni-C/N bonds with C and N, which were conducive to the catalytic oxidation of benzene at room temperature. Further catalytic reaction mechanisms indicate that benzene reacted with ·OH to produce R·, which reacted with O2 to regenerate ·OH. Under the strong oxidation of ·OH, benzene was oxidized to form alcohols, carboxylic acids, and eventually CO2 and H2O. This study not only significantly reduces the energy consumption of VOC catalytic oxidation, but also improves the safety of VOC treatment, providing new ideas for the low energy consumption and green development of VOC treatment.

Co3Fe7/CoCx nanoparticles encapsulated in nitrogen-doped carbon nanotubes synergistically promote the oxygen reduction reaction in Zn-air batteries

Efficient and stable non-precious metal catalysts (NPMCs) for the oxygen reduction reaction (ORR) are crucial for the advancement of Zn-air batteries. Herein, we report a supramolecular self-scarifying template and confinement pyrolysis strategy to obtain an efficient ORR catalyst of well-dispersed Co3Fe7/CoCx heterostructure nanoparticles encapsulated by nitrogen-doped carbon nanotubes (Co3Fe7/CoCx@N-CNT). The as-synthesized Co3Fe7/CoCx@N-CNT catalyst exhibited outstanding ORR activity, with a half-wave potential of 0.88 V versus a reversible hydrogen electrode, and good stability. The Zn-air battery based on the Co3Fe7/CoCx@N-CNT cathode achieved a peak power density of 265 mW cm-2 and a durability of over 200 h, which is superior to most reported NPMCs and even the Pt/C counterpart. The physical characterization and electrochemical poisoning experiments revealed that the Co3Fe7/CoCx nanoparticles in the core along with pyridine N and Fe-Nx hosted in the carbon nanotube all acted as active sites for the ORR. Further theoretical calculations showed that the charge redistribution between the Co3Fe7/CoCx nanoparticles and the Fe-Nx carbon overlayers downshifted the d-band center of Fe and optimized the adsorption ability, which boosted the ORR kinetics. This work provides an effective strategy to synthesize non-precious metal ORR catalysts with multiple active sites and highlights the synergistic role of encapsulated nanoparticles and carbon support.

A polymer tethering strategy to achieve high metal loading on catalysts for Fenton reactions

The development of heterogenous catalysts based on the synthesis of 2D carbon-supported metal nanocatalysts with high metal loading and dispersion is important. However, such practices remain challenging to develop. Here, we report a self-polymerization confinement strategy to fabricate a series of ultrafine metal embedded N-doped carbon nanosheets (M@N-C) with loadings of up to 30 wt%. Systematic investigation confirms that abundant catechol groups for anchoring metal ions and entangled polymer networks with the stable coordinate environment are essential for realizing high-loading M@N-C catalysts. As a demonstration, Fe@N-C exhibits the dual high-efficiency performance in Fenton reaction with both impressive catalytic activity (0.818 min-1) and H2O2 utilization efficiency (84.1%) using sulfamethoxazole as the probe, which has not yet been achieved simultaneously. Theoretical calculations reveal that the abundant Fe nanocrystals increase the electron density of the N-doped carbon frameworks, thereby facilitating the continuous generation of long-lasting surface-bound •OH through lowering the energy barrier for H2O2 activation. This facile and universal strategy paves the way for the fabrication of diverse high-loading heterogeneous catalysts for broad applications.

Insights on the Roles of Nitrogen Configuration in Enhancing the Performance of Electrocatalytic Methanol Oxidation over Pt Nanoparticles

Stabilization of the Pt in N-doped carbon materials is an effective method to improve the performance of electrocatalytic methanol oxidation reaction (MOR). Nevertheless, the roles of different N configurations (pyridinic N, pyrrolic N, and graphitic N) toward the electrochemical performance of Pt-based catalysts remain unclear. Herein, Density Functional Theory calculations are adopted to elucidate the synergistic promotion of MOR by different N-configurations with Pt nanoparticles (NPs). Guided by the theoretical study, a series of MOR electrocatalysts with different ratios of pyridinic N and pyrrolic N (denoted as Pt/N-CNT-X (500, 600, 700, 800, and 900)) are designed and synthesized. Surprisingly, the electrocatalytic activity of Pt/N-CNT-600 with a suitable ratio of pyrrolic-N and pyridinic-N for MOR reaches 2394.7 mA mg-1 Pt and 5515.8 mA mg-1 Pt in acidic and alkaline media, respectively, which are superior to the Pt/CNTs, commercial Pt/C, and the ever-reported Pt-based electrocatalysts. The strong metal-support interaction induced by the N-doping is the crucial reason for the superior electrocatalytic performance. More importantly, the ability of pyrrolic-N and pyridinic-N in promoting the adsorption and oxidation of CH3 OH and the oxidation of CO* is substantiated for the first time in methanol oxidation. This work provides new insights on the design of efficient electrocatalysts for MOR.

Zn-Induced Synthesis of Porous Fe-N,S-C Electrocatalyst with Iron-Based Active Sites Containing Sulfides, Oxides and Nitrides for Efficient Oxygen Reduction and Zinc-Air Batteries

There is an urgent need to design and synthesize non-noble metal electrocatalysts (NNMEs) for the replacement of platinum-based electrocatalysts to enhance the sluggish oxygen reduction reaction (ORR) for Zn-air batteries and fuel cells. Herein, Fe-N,S-C materials were fabricated through two steps: first, reprecipitating hemin by adjusting the pH and, then, decorating it with melamine and cysteine in the presence of Zn2+. The resulting Fe-N,S-C-950 (Zn) was prepared after pyrolysis at 950 °C. Using this method, abundant iron-based active species with good dispersion were obtained. The fabrication of more micropores in Fe-N,S-C-950 (Zn) plays a positive role in the improvement of ORR activity. On comparison, Fe-N,S-C-950 (Zn) outperforms Fe-N,S-C-950 and Fe-N-C-950 (Zn) with respect to the ORR due to its larger specific surface area, porous structure, multiple iron-based active sites and N- and S-doped C. Fe-N,S-C-950 (Zn) achieves outstanding ORR performances, including a half-wave potential (E1/2) of 0.844 V and 0.715 V versus a reversible hydrogen electrode (RHE) in 0.1 M KOH and 0.1 M HClO4 solution, respectively. In addition, Fe-N,S-C-950 (Zn) shows an outstanding Zn-air battery performance with an open-circuit voltage (OCV) of 1.450 V and a peak power density of 121.9 mW cm-2, which is higher than that of 20 wt% Pt/C. As a result, the as-prepared electrocatalyst in this work shows the development of the Zn-assisted strategy combined with the assembly of porphyrins as NNMEs for the enhancement of the ORR in both alkaline and acidic solutions.

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.

Ultrathin Nitrogen-Doped Carbon Encapsulated Ni Nanoparticles for Highly Efficient Electrochemical CO2 Reduction and Aqueous Zn-CO2 Batteries

Electrochemical CO₂ reduction reaction (CO₂ RR), powered by renewable electricity, has attracted great attention for producing high value-added fuels and chemicals, as well as feasibly mitigating CO₂ emission problem. Here, this work reports a facile hard template strategy to prepare the Ni@N-C catalyst with core-shell structure, where nickel nanoparticles (Ni NPs) are encapsulated by thin nitrogen-doped carbon shells (N-C shells). The Ni@N-C catalyst has demonstrated a promising industrial current density of 236.7 mA cm^-2 with the superb FE_CO of 97% at -1.1 V versus RHE. Moreover, Ni@N-C can drive the reversible Zn-CO₂ battery with the largest power density of 1.64 mW cm^-2 , and endure a tough cycling durability. These excellent performances are ascribed to the synergistic effect of Ni@N-C that Ni NPs can regulate the electronic microenvironment of N-doped carbon shells, which favor to enhance the CO₂ adsorption capacity and the electron transfer capacity. Density functional theory calculations prove that the binding configuration of N-C located on the top of Ni slabs (Top-Ni@N-C) is the most thermodynamically stable and possess a lowest thermodynamic barrier for the formation of COOH^* and the desorption of CO. This work may pioneer a new method on seeking high-efficiency and worthwhile electrocatalysts for CO₂ RR and Zn-CO₂ battery.

Tailored nitrogen-defect induced by diels-alder reaction for enhanced electrochemical hydrogen evolution reaction

Electrocatalytic water splitting in an alkaline medium is recognized as the promising technology to sustainably generate clean hydrogen energy via hydrogen evolution reaction (HER), while the sluggish water dissociation and subsequent *H adsorption steps greatly retarded the reaction kinetics and efficiency of the overall hydrogen evolution process. Whilst nitrogen (N)-doped carbon-based materials are attractive candidates for promoting HER activity, the facile fabrication and gaining a deeper insight into the electrocatalytic mechanism are still challenging. Herein, inspired by the Diels-Alder reaction, we precisely tailored six-membered pyridinic N and five-membered pyrrolic N sites at the edge of the carbon substrates. Comprehensive analysis validates that the participation of pyridinic N (electron-withdrawing) and pyrrolic N (electron-releasing) will induce the charge rearrangements, and further generate local electrophilic and nucleophilic domains in adjacent carbon rings, which guarantees the occurrence of water dissociation to generate protons and the subsequent adsorption of *H intermediates through electrostatic interactions, thereby facilitating the overall reaction kinetics. To this end, the optimal NC-ZnCl₂-25 % electrocatalysts present excellent alkaline HER activity (η₁₀ = 45 mV, Tafel slop of 37.7 mV dec^-1) superior to commercial Pt/C.

Nitrogen-Neighbored Single-Cobalt Sites Enable Heterogeneous Oxidase-Type Catalysis

The development of biomimetic catalytic systems that can imitate or even surpass natural enzymes remains an ongoing challenge, especially for bioinspired syntheses that can access non-natural reactions. Here, we show how an all-inorganic biomimetic system bearing robust nitrogen-neighbored single-cobalt site/pyridinic-N site (Co-N4/Py-N) pairs can act cooperatively as an oxidase mimic, which renders an engaged coupling of oxygen (O2) reduction with synthetically beneficial chemical transformations. By developing this broadly applicable platform, the scalable synthesis of greater than 100 industrially and pharmaceutically appealing O-silylated compounds including silanols, borasiloxanes, and silyl ethers via the unprecedented aerobic oxidation of hydrosilane under ambient conditions is demonstrated. Moreover, this heterogeneous oxidase mimic also offers the potential for expanding the catalytic scope of enzymatic synthesis. We anticipate that the strategy demonstrated here will pave a new avenue for understanding the underlying nature of redox enzymes and open up a new class of material systems for artificial biomimetics.

Metal-Free N-Doped Carbons for Solvent-Less CO2 Fixation Reactions: A Shrimp Shell Valorization Opportunity

High anthropogenic CO₂ emissions are among the main causes of climate change. Herein, we investigate the use of CO₂ for the synthesis of organic cyclic carbonates on metal-free nitrogen-doped carbon catalysts obtained from chitosan, chitin, and shrimp shell wastes, both in batch and in continuous flow (CF). The catalysts were characterized by N₂ physisorption, CO₂-temperature-programmed desorption, X-ray photoelectron spectroscopy, scanning electron microscopy, and CNHS elemental analysis, and all reactivity tests were run in the absence of solvents. Under batch conditions, the catalyst obtained by calcination of chitin exhibited excellent performance in the conversion of epichlorohydrin (selected as a model epoxide), resulting in the corresponding cyclic carbonate with 96% selectivity at complete conversion, at 150 °C and 30 bar CO₂, for 4 h. On the other hand, in a CF regime, a quantitative conversion and a carbonate selectivity >99% were achieved at 150 °C, by using the catalyst obtained from shrimp waste. Remarkably, the material displayed an outstanding stability over a reaction run time of 180 min. The robustness of the synthetized catalysts was confirmed by their good operational stability and reusability: ca. (75 ± 3)% of the initial conversion was achieved/retained by all systems, after six recycles. Also, additional batch experiments proved that the catalysts were successful on different terminal and internal epoxides.

Rational Regulation of Co-N-C Coordination for High-Efficiency Generation of 1O2 toward Nearly 100% Selective Degradation of Organic Pollutants

Single oxygen-based advanced oxidation processes (¹O₂-AOPs) exhibit great prospects in selective degradation of organic pollutants. However, efficient production of ¹O₂ via tailored design of catalysts to achieve selective oxidation of contaminants remains challenging. Herein, we develop a simple strategy to regulate the components and coordination of Co-N-C catalysts at the atomic level by adjusting the Zn/Co ratio of bimetallic zeolitic imidazolate frameworks (Zn_xCo₁-ZIFs). Zn₄Co₁-C demonstrates 98% selective removal of phenol in the mixed phenol/benzoic acid (phenol/BA) solutions. Density functional theory calculations and experiments reveal that more active CoN₄ sites are generated in Zn₄Co₁-C, which are beneficial to peroxymonosulfate activation to generate ¹O₂. Furthermore, the correlation between the origin of selectivity and well-defined catalysts is systematically investigated by the electron paramagnetic resonance test and quenching experiments. This work may provide novel insights into selective removal of target pollutants in a complicated water matrix.

Insights into the role of dual reaction sites for single Ni atom Fenton-like catalyst towards degradation of various organic contaminants

The trade-off of Fenton-like catalysts in activity and stability remains a challenge in practical remediation applications. In this work, we successfully synthesized an efficient and stable catalyst comprised of single nickel (Ni) atoms dispersed on N-doped porous carbon (named Ni-SAs@CN) through a simple micropore confinement strategy. The catalyst exhibited outstanding catalytic performance with 25.8 min^-1 turnover frequency for peroxymonosulfate (PMS) activation toward degradation of various organic pollutants (e.g., antibiotics, dyes, and plasticizers) in a wide pH range (4.5-10.8). Electron paramagnetic resonance and in situ Raman analyses demonstrated that both radical (including SO₄^•- and ^•OH) and Ni-PMS* dominated nonradical (via electron transfer) pathways played pivotal role in the decomposition of organics. The X-ray adsorption fine structure analysis and computational pieces of evidence demonstrate that the atomically dispersed NiN₄ coordination is the intrinsic catalytic site for PMS activation. Meanwhile, pyrrolic N acts as a functional site to anchor target contaminants to the surface region for oxidation. In this process which is benefited from the dual active sites, the target contaminants were degraded via combined radical and nonradical pathways, which significantly boost the overall oxidation and mineralization kinetics.

Nitrogen-doped carbon nanosheets with Fe-based nanoparticles for highly efficient degradation of antibiotics and sulfate ion enhancement effect

Developing Fe-based catalysts with high-effective and environmentally friendly features in Fenton-like system for treating wastewater is still a challenge. Novel nitrogen-doped carbon nanosheets with Fe⁰/Fe₃C nano-particles (Fe@NCS-900) were prepared through a simple solvent-free strategy by pyrolyzing the mixture of 2,6-diaminopyridine and ferric chloride hexahydrate under 900 °C. The Fe@NCS-900 possessed almost 100% removal efficiency and 66.5% mineralization rate for the degradation of CBZ in 10 min. Moreover, the Fe@NCS-900 exhibited an apparent first-order constant as high as 0.8809 min^-1, which is 22 and 29 times higher than that of the commercial Fe⁰ and traditional Fenton system, respectively, which could be attribute to the high graphitization degree and rich nitrogen content. Besides, the results of the radical quenching experiments, electron paramagnetic resonance (EPR) and the probe experiments demonstrated that a large number of high valent iron species (Fe (IV)) besides singlet oxygen (¹O₂) and superoxide radicals (O₂^•-) existed and contributed to the CBZ degradation. More interestingly, the addition of coexisting anion SO₄^2- in the reaction system could significantly boost the concentration of •OH and SO₄^•- by 28.3 times and 9.7 times, respectively, resulting in the increase of the apparent first-order constant by 5.9 times (5.1733 min^-1), which was entirely different from previous reports that SO₄^2- had no effect on the catalytic activity or even displayed slightly inhibitory effect. In addition, the catalyst exhibited broad pH adaptability in the pH range of 2-9. The intermediate products of CBZ degradation were investigated by liquid chromatography mass spectrometry (LC-MS) and the degradation pathway was proposed. This paper provides new insights for developing a promising Fe-based nitrogen-doped catalyst for practical wastewater treatment.

Advancements in cathode catalyst and cathode layer design for proton exchange membrane fuel cells

Proton exchange membrane fuel cells have been recently developed at an increasing pace as clean energy conversion devices for stationary and transport sector applications. High platinum cathode loadings contribute significantly to costs. This is why improved catalyst and support materials as well as catalyst layer design are critically needed. Recent advances in nanotechnologies and material sciences have led to the discoveries of several highly promising families of materials. These include platinum-based alloys with shape-selected nanostructures, platinum-group-metal-free catalysts such as metal-nitrogen-doped carbon materials and modification of the carbon support to control surface properties and ionomer/catalyst interactions. Furthermore, the development of advanced characterization techniques allows a deeper understanding of the catalyst evolution under different conditions. This review focuses on all these recent developments and it closes with a discussion of future research directions in the field.

The high platinum loadings at the cathodes of proton exchange membrane fuel cells significantly contribute to the cost of these clean energy conversion devices. Here, the authors critically review and discuss recent developments on low- and non-platinum-based cathode catalysts and catalyst layers.

Identifying the Dominant Role of Pyridinic-N-Mo Bonding in Synergistic Electrocatalysis for Ambient Nitrogen Reduction

For electrochemical nitrogen reduction reaction (NRR), hybridizing transition metal (TM) compounds with nitrogen-doped carbonaceous materials has been recognized as a promising strategy to improve the activity and stability of electrocatalysts due to the synergistic interaction from the TM-N-C active sites. Nevertheless, up to date, the fundamental mechanism of this so-called synergistic electrocatalysis for NRR is still unclear. Particularly, it remains ambiguous which configuration of N dopants, either pyridinic N or pyrrolic N, when coordinated with the TM, predominately contributes to this synergy. Herein, a self-assembled three-dimensional 1T-phase MoS₂ microsphere coupled with N-doped carbon was developed (termed MoS₂/NC), showing an impressive NRR performance in neutral medium. The hybridization of MoS₂ and N-doped carbon can synergistically enhance the NRR efficiency by optimizing the electron transfer of catalyst. Acidification/blocking/poisoning experiments reveal the decisive role of pyridinic-N-Mo bonding, rather than pyrrolic-N-Mo bonding, in synergistically enhancing NRR electrocatalysis. The electrochemical-based in situ Fourier transform infrared spectroscopy (in situ FTIR) technology provides deep insights into the substantial contribution of pyridinic-N-MoS₂ sites to NRR electrocatalysis and further uncover the underlying mechanism (associative pathway) at a molecular level.

Mechanistic understanding of highly selective adsorption of bisphenols on microporous-dominated nitrogen-doped framework carbon

Producing a desirable adsorbent for removing endocrine disrupting compounds (EDCs) from aqueous solutions remains a major challenge. In this work, microporous-dominated nitrogen-doped framework carbons (MNFCs, s means the calcination temperature) with high specific surface area, ultra-microporous structure, and high nitrogen-doping can be obtained by a direct calcination of ethylene diamine tetraacetic acid tetrasodium (EDTA-4Na) without aid of any catalyst and nitrogen source. MNFCs were applied adsorbents to remove bisphenols from aqueous solution. Batch experiments showed MNFC-750 had a large adsorption capacity for bisphenols from aqueous solutions (409 mg/g for bisphenol A, 364 mg/g for bisphenol F, and 521 mg/g for bisphenol S) along with short equilibrium time (30 min), and good stability and reusability. Using multiple characterizations and comparative experiments along with theoretical calculations, we discovered that: (1) nitrogen-doping can significantly boost the adsorption capacity; (2) adsorption sites are mainly the pyridinic-N instead of pyrrolic-N and graphitic-N; and (3) the adsorption mechanisms were mainly driven by Lewis acid-base interaction, hydrophobic interaction, π-π interaction and hydrogen bond interaction. These findings indicate that MNFCs present a promising potential for practical applications and shed light on the rational design of nitrogen doped carbon-based adsorbents for efficient pollutant removal.

Confining Chainmail-Bearing Ni Nanoparticles in N-doped Carbon Nanotubes for Robust and Efficient Electroreduction of CO2

It still remains challenging to simultaneously achieve high stability, selectivity, and activity in CO₂ reduction. Herein, a dual chainmail-bearing nickel-based catalyst (Ni@NC@NCNT) was fabricated via a solvothermal-evaporation-calcination approach. In situ encapsulated N-doped carbon layers (NCs) and nanotubes (NCNTs) gave a dual protection to the metallic core. The confined space well maintained the local alkaline pH value and suppressed hydrogen evolution. Large surface area and abundant pyridinic N and Ni^δ+ sites ensured high CO₂ adsorption capacity and strength. Benefitting from these, it delivered a CO faradaic efficiency of 94.1 % and current density of 48.0 mA cm^-2 at -0.75 and -1.10 V, respectively. Moreover, the performance remained unchanged after continuous electrolysis for 43 h, far exceeding Ni@NC with single chainmail, Ni@NC/NCNT with Ni@NC sitting on the walls of NCNT, bare NCNT and most state-of-the-art catalysts, demonstrating structural superiority of Ni@NC@NCNT. This work sheds light on designing unique architectures to improve electrochemical performances.

Heteroatom-doped carbon-based oxygen reduction electrocatalysts with tailored four-electron and two-electron selectivity

Oxygen reduction reaction (ORR) plays a pivotal role in electrochemical energy conversion and commodity chemical production. Oxygen reduction involving a complete four-electron (4e-) transfer is important for the efficient operation of polymer electrolyte fuel cells, whereas the ORR with a partial 2e- transfer can serve as a versatile method for producing industrially important hydrogen peroxide (H2O2). For both the 4e- and 2e- pathway ORR, platinum-group metals (PGMs) have been materials of prevalent choice owing to their high intrinsic activity, but they are costly and scarce. Hence, the development of highly active and selective non-precious metal catalysts is of crucial importance for advancing electrocatalysis of the ORR. Heteroatom-doped carbon-based electrocatalysts have emerged as promising alternatives to PGM catalysts owing to their appreciable activity, tunable selectivity, and facile preparation. This review provides an overview of the design of heteroatom-doped carbon ORR catalysts with tailored 4e- or 2e- selectivities. We highlight catalyst design strategies that promote 4e- or 2e- ORR activity. We also summarise the major active sites and activity descriptors of the respective ORR pathways and describe the catalyst properties controlling the ORR mechanisms. We conclude the review with a summary and suggestions for future research.

Boosting Oxygen Electroreduction over Strained Silver

Manipulating the strain effect of Ag without any foreign metals to boost its intrinsic oxygen reduction reaction (ORR) activity is intriguing, but it remains a challenge. Herein, we developed a class of Ag-based electrocatalysts with tunable strain structures for efficient ORR via ligand-assisted competitive decomposition of Ag-organic complexes (AgOCs). Benefiting from the superior coordination capability, 4,4'-bipyridine as a ligand triggered a stronger competition with NaBH₄ for Ag ions during reduction-induced decomposition of AgOCs in comparison with the counterparts of the pyrazine ligand and the NO₃^- anion, which moderately modulated the compressive strain structure to upshift the d-band center of the catalyst and increase the electron density of Ag. Accordingly, the O₂ adsorption was obviously improved, and the stronger repulsion effect between the Ag sites and the 4e ORR product, i.e., the electron-rich OH^-, was generated to promote the desorption of OH^- via the Ag-OH bond cleavage, which enabled more Ag sites to be regenerated after ORR. Both of these led to an enhancement to the intrinsic ORR activity of the Ag-based catalyst. This competitive decomposition of metal-organic complex strategy would provide a facile method to design other catalysts with the well-tuned strain structures for energy conversion and heterocatalysis.

Electrochemical Reduction of CO2 to CO by N,S Dual-Doped Carbon Nanoweb Catalysts

Converting CO₂ into useful chemicals through an electrocatalytic process is an attractive solution to reduce CO₂ in the atmosphere. However, the process suffers from high overpotential, low activity, or poor product selectivity. In this study, N,S dual-doped carbon nanoweb (NSCNW) materials were proposed as an efficient nonmetallic electrocatalyst for CO₂ reduction. The NSCNW catalysts preferentially and rapidly converted CO₂ into CO with a high Faradaic efficiency of 93.4 % and a partial current density of -5.93 mA cm^-2 at a low overpotential of 490 mV. A small Tafel slope value (93 mV dec^-1 ) was obtained, demonstrating a high rate for CO₂ reduction. Moreover, the catalysts also exhibited a quite stable current-density profile during 20 h with a high CO Faradaic efficiency above 90 % throughout the electrolysis reaction. The high catalytic performance of the catalysts for CO₂ reduction could be attributed to synergistic effects associated with the structural advantages of 3 D carbon nanoweb structures and effective S doping of the carbon materials with the highest ratio of thiophene-like S to oxidized S species.

Kirkendall effect modulated hollow red phosphorus nanospheres for high performance sodium-ion battery anodes

Kirkendall effect mediated hollow red phosphorus nanospheres in a mild molten salt reaction exhibit great sodium storage performance.

Carbon-Based Metal-Free ORR Electrocatalysts for Fuel Cells: Past, Present, and Future

Replacing precious platinum with earth-abundant materials for the oxygen reduction reaction (ORR) in fuel cells has been the objective worldwide for several decades. In the last 10 years, the fastest-growing branch in this area has been carbon-based metal-free ORR electrocatalysts. Great progress has been made in promoting the performance and understanding the underlying fundamentals. Here, a comprehensive review of this field is presented by emphasizing the emerging issues including the predictive design and controllable construction of porous structures and doping configurations, mechanistic understanding from the model catalysts, integrated experimental and theoretical studies, and performance evaluation in full cells. Centering on these topics, the most up-to-date results are presented, along with remarks and perspectives for the future development of carbon-based metal-free ORR electrocatalysts.

An elemental S/P photocatalyst for hydrogen evolution from water under visible to near-infrared light irradiation

An elemental S/P photocatalyst exhibits enhanced photocatalytic activity for hydrogen evolution from water due to the co-catalyst effect of S.

Engineering the Interface of Carbon Electrocatalysts at the Triple Point for Enhanced Oxygen Reduction Reaction

The aqueous oxygen reduction reaction (ORR) has recently received increased attention due to its critical role in clean and sustainable energy-generation technologies, such as proton exchange membranes (PEM) fuel cells, alkaline fuel cells and Zn-air batteries. The sluggish kinetics associated with ORR result from multistep electron-transfer process. The slow kinetics are partially related to the O₂ adsorption process onto the catalyst, which happens at the triple-phase boundary (TPB) of the electrocatalyst-electrolyte-oxygen interface. Hence, tremendous efforts have been devoted to improving the intrinsic properties of electrocatalysts such as active sites, electrical conductivity and porosity. Engineering the electrocatalyst's interfacial properties is another critical issue in ORR, however less described in the literature. The surface of the catalyst provides the microenvironment for the triple boundary interface reaction, which directly influences its electrocatalytic activity and the kinetics. This Minireview is a summary of the existing literature on manipulating the interfacial surface of non-precious metal catalysts at the triple point between the solid catalyst, the aqueous electrolyte and the O₂ gas with the aim of improving the ORR efficiency. Various approaches towards improving the wettability and nanostructuring the catalyst surface to boost the activity of the surface-active sites and provide improved stability are discussed.

Single Cobalt Atoms Anchored on Porous N-Doped Graphene with Dual Reaction Sites for Efficient Fenton-like Catalysis

The Fenton-like process presents one of the most promising strategies to generate reactive oxygen-containing radicals to deal with the ever-growing environmental pollution. However, developing improved catalysts with adequate activity and stability is still a long-term goal for practical application. Herein, we demonstrate single cobalt atoms anchored on porous N-doped graphene with dual reaction sites as highly reactive and stable Fenton-like catalysts for efficient catalytic oxidation of recalcitrant organics via activation of peroxymonosulfate (PMS). Our experiments and density functional theory (DFT) calculations show that the CoN₄ site with a single Co atom serves as the active site with optimal binding energy for PMS activation, while the adjacent pyrrolic N site adsorbs organic molecules. The dual reaction sites greatly reduce the migration distance of the active singlet oxygen produced from PMS activation and thus improve the Fenton-like catalytic performance.