Enhanced Catalytic Activity in Nitrogen-Anion Modified Metallic Cobalt Disulfide Porous Nanowire Arrays for Hydrogen Evolution

High-Entropy Metal Sulfide Nanocrystal Libraries for Highly Reversible Sodium Storage

Controlled synthesis of high-entropy materials offers a unique platform to explore unprecedented electrochemical properties. High-entropy metal sulfides (HEMSs) have recently emerged as promising electrodes in electrochemical energy storage applications. However, synthesizing HEMSs with a tunable number of components and composition is still challenging. Here, a HEMS library is built by using a general synthetic approach, enabling the synthesis of HEMS with arbitrary combinations of 5 to 12 out of 28 elements in the periodic table. The formation of a solid solution of HEMS is attributed to the two-step method that lowers the energy barrier and facilitates the sulfur diffusion during the synthesis. The hard soft acid base (HSAB) theory is used to precisely describe the conversion rates of the metal precursors during the synthesis. The HEMSs as cathodes in Na-ion batteries (SIBs) is investigated, where 7-component HEMS (7-HEMS) delivers a promising rate capability and an exceptional sodium storage performance with reversible a capacity of 230 mAh g-1 over 3000 cycles. This work paves the way for the multidisciplinary exploration of HEMSs and their potential in electrochemical energy storage.

Manganese valence modulation inδ-MnO2via F-doping for enhanced electrocatalytic oxygen evolution reaction

Manganese dioxide (MnO2) is recognized as a promising candidate for the oxygen evolution reaction (OER); however, its practical application is hindered by limited active sites and low electrical conductivity. Fluorine (F), known for its strong electron affinity and electronegativity, can modulate the surface electronic structure and physicochemical properties of catalysts. In this study, we synthesized MnO2nanosheets and fluorine-doped MnO2(F-MnO2) using simple hydrothermal and ion-exchange methods. We then assessed the influence of fluorine doping on the intrinsic OER activity and stability of these catalysts, as well as their underlying catalytic mechanisms. By manipulating the amount of fluorine introduced and the fluorination temperature, we explored the relationship between varying fluorine concentrations and OER performance. The experimental results show that F-MnO2exhibits higher OER activity than pristine MnO2. At a current density of 10 mA cm-2, the overpotential required for F-MnO2is merely 320 mV, substantially lower than that of pristine MnO2. This enhanced performance is ascribed to fluorine doping, which leads to an increased quantity of active Mn3+centers and oxygen vacancies, along with an expanded electrochemically active surface area. Furthermore, F-MnO2displays improved stability during the testing period. It maintains long-term stability for over 25 h, further corroborating the catalyst's excellent anti-oxidation and anti-corrosion properties in alkaline water electrolysis.

Surface Area-Enhanced Cerium and Sulfur-Modified Hierarchical Bismuth Oxide Nanosheets for Electrochemical Carbon Dioxide Reduction to Formate

Electrochemical carbon dioxide reduction reaction (ECO2RR) is a promising approach to synthesize fuels and value-added chemical feedstocks while reducing atmospheric CO2 levels. Here, high surface area cerium and sulfur-doped hierarchical bismuth oxide nanosheets (Ce@S-Bi2O3) are develpoed by a solvothermal method. The resulting Ce@S-Bi2O3 electrocatalyst shows a maximum formate Faradaic efficiency (FE) of 92.5% and a current density of 42.09 mA cm-2 at -1.16 V versus RHE using a traditional H-cell system. Furthermore, using a three-chamber gas diffusion electrode (GDE) reactor, a maximum formate FE of 85% is achieved in a wide range of applied potentials (-0.86 to -1.36 V vs RHE) using Ce@S-Bi2O3. The density functional theory (DFT) results show that doping of Ce and S in Bi2O3 enhances formate production by weakening the OH* and H* species. Moreover, DFT calculations reveal that *OCHO is a dominant pathway on Ce@S-Bi2O3 that leads to efficient formate production. This study opens up new avenues for designing metal and element-doped electrocatalysts to improve the catalytic activity and selectivity for ECO2RR.

From Charge to Spin: An In-Depth Exploration of Electron Transfer in Energy Electrocatalysis

Catalytic materials play crucial roles in various energy-related processes, ranging from large-scale chemical production to advancements in renewable energy technologies. Despite a century of dedicated research, major enduring challenges associated with enhancing catalyst efficiency and durability, particularly in green energy-related electrochemical reactions, remain. Focusing only on either the crystal structure or electronic structure of a catalyst is deemed insufficient to break the linear scaling relationship (LSR), which is the golden rule for the design of advanced catalysts. The discourse in this review intricately outlines the essence of heterogeneous catalysis reactions by highlighting the vital roles played by electron properties. The physical and electrochemical properties of electron charge and spin that govern catalysis efficiencies are analyzed. Emphasis is placed on the pronounced influence of external fields in perturbing the LSR, underscoring the vital role that electron spin plays in advancing high-performance catalyst design. The review culminates by proffering insights into the potential applications of spin catalysis, concluding with a discussion of extant challenges and inherent limitations.

Modulating Electronic Structures of Bimetallic Co-Fe Sulfide Ultrathin Nanosheet Supported on g-C3N4 Promoting Electrocatalytic Hydrogen Evolution Performance

Heteroatom doping is a possible way to regulate the catalytic capability of electrocatalysts for hydrogen evolution reaction (HER). This work focuses on the development of bimetallic Cobalt-Iron sulfide ultrathin nanosheets supported on the graphitic carbon nitride (g-C3N4) catalyst as efficient HER electrocatalysts (CoS2/FeS2/CN) with good stability at wide pH value. The ultrathin nanosheet exposes more active sites and enhances the catalyst activity. Electrochemical experiments demonstrate that adding g-C3N4 and Fe to CoS2 increases its catalytic activity and stability. Furthermore, g-C3N4 and Fe co-doped with CoS2 can modulate electronic structures on the interface. The CoS2/FeS2/CN exhibits outstanding HER performance, reaching a current density of 10 mA cm-2 with overpotentials of only 76.5 mV in an acidic solution and 175.6 mV in an alkaline solution. It also demonstrates exceptional durability, superior to commercial platinum/carbon catalysts. This work introduces a promising approach for designing low-cost, high-performance HER electrocatalysts with a wide pH range.

Nitrogen-Doped CuO@CuS Core-Shell Structure for Highly Efficient Catalytic OER Application

Water electrolysis is a highly efficient route to produce ideally clean H2 fuel with excellent energy conversion efficiency and high gravimetric energy density, without producing carbon traces, unlike steam methane reforming, and it resolves the issues of environmental contamination via replacing the conventional fossil fuel. Particular importance lies in the advancement of highly effective non-precious catalysts for the oxygen evolution reaction (OER). The electrocatalytic activity of an active catalyst mainly depends on the material conductivity, accessible catalytically active sites, and intrinsic OER reaction kinetics, which can be tuned via introducing N heteroatoms in the catalyst structure. Herein, the efficacious nitrogenation of CuS was accomplished, synthesized using a hydrothermal procedure, and characterized for its electrocatalytic activity towards OER. The nitrogen-doped CuO@CuS (N,CuO@CuS) electrocatalyst exhibited superior OER activity compared to pristine CuS (268 and 602 mV), achieving a low overpotential of 240 and 392 mV at a current density of 10 and 100 mA/cm2, respectively, ascribed to the favorable electronic structural modification triggered by nitrogen incorporation. The N,CuO@CuS also exhibits excellent endurance under varied current rates and a static potential response over 25 h with stability measured at 10 and 100 mA/cm2.

Hollow Structure Co1-xS/3D-Ti3C2Tx MXene Composite for Separator Modification of Lithium-Sulfur Batteries

The commercial application of lithium-sulfur (Li-S) batteries has faced obstacles, including challenges related to low sulfur utilization, structural degradation resulting from electrode volume expansion, and migration of polysulfide lithium (LiPSs). Herein, Co1-xS/3D-Ti3C2Tx composites with three-dimensional (3D) multilayered structures are used as separator modification materials for Li-S batteries to solve these problems. The multilevel layered structure of Co1-xS/3D-Ti3C2Tx establishes an efficient electron and Li+ transfer path, alleviates the volume change during the battery charge-discharge process, and enhances the stability of the structure. In addition, the battery assembled with the modified separator shows excellent discharge capacity and cycle stability at 0.5 C and could maintain a high discharge capacity after 500 cycles. This work provides a method for designing highly dispersed metal sulfide nanoparticles on MXenes and extends the application of MXenes-based composites in electrochemical energy storage.

Delocalized Electronic Engineering of Ni5 P4 Nanoroses for Durable Li-O2 Batteries

The sluggish kinetics and issues associated with the parasitic reactions of cathodes are major obstacles to the large-scale application of Li-O2 batteries (LOBs), despite their large theoretical energy density. Therefore, efficient electrocatalyst design is critical for optimizing their performance. Ni5 P4 is analyzed theoretically as a cathode material, and the downshift of the d-band center is found to enhance electron occupation in antibonding orbits, providing a valuable descriptor for understanding and enhancing the intrinsic electrocatalytic activity. In this study, it is demonstrated that incorporating additional nitrogen atoms into Ni5 P4 nanoroses regulates the electronic structure, resulting in superior electrocatalytic performance in LOBs. Further spectroscopic analysis and density functional theory calculations reveal that the incorporated nitrogen sites can effectively induce localized structure polarization, lowering the energy barrier for the production of desirable intermediates and thus enhancing battery capacity and preventing cell degradation. This approach provides a sound basis for developing advanced electrode materials with optimized electronic structures for high-performance LOBs.

Modulating Electronic Structure with Copper Doping to Promote the Electrocatalytic Performance of Cobalt Disulfide in Li-O2 Batteries

Introducing heteroatom into catalyst lattice to modulate its intrinsic electronic structure is an efficient strategy to improve the electrocatalytic performance in Li-O₂ batteries. Herein, Cu-doped CoS₂ (Cu-CoS₂ ) nanoparticles are fabricated by a solvothermal method and evaluated as promising cathode catalysts for Li-O₂ batteries. Based on physicochemical analysis as well as density functional theory calculations, it is revealed that doping Cu heteroatom in CoS₂ lattice can increase the covalency of the CoS bond with more electron transfer from Co 3d to S 3p orbitals, thereby resulting in less electron transfer from Co 3d to O 2p orbitals of Li-O species, which can weaken the adsorption strength toward Li-O intermediates, decrease the reaction barrier, and thus improve the catalytic performance in Li-O₂ batteries. As a result, the battery using Cu-CoS₂ nanoparticles in the cathode exhibits superior kinetics, reversibility, capacity, and cycling performance, as compared to the battery based on CoS₂ catalyst. This work provides an atomic-level insight into the rational design of transition-metal dichalcogenide catalysts via regulating the electronic structure for high-performance Li-O₂ batteries.

Hierarchical Metal Sulfides Heterostructure as Superior Bifunctional Electrode for Overall Water Splitting

The development of highly active bifunctional electrocatalysts for overall water splitting is of significant importance, but huge challenges remain. The key element depends on engineering the electronic structure and surface properties of material to achieve improved catalytic activity. Herein, a hierarchical nanowire array of metal sulfides heterostructure on nickel foam (FeCoNiS_x /NF) was designed as a novel type of hybrid electrocatalyst for overall water splitting. The hybrid structure endowed plenty of catalytic active sites, strong electronic interactions, and high interfacial charge transferability, leading to superior bifunctional performance. As a result, the FeCoNiS_x /NF catalyst delivered low overpotentials of 97 and 260 mV at the current density of 50 mA cm^-2 for hydrogen and oxygen evolution reactions, respectively. Moreover, the FeCoNiS_x /NF-based water electrolyzer exhibited a small potential of 1.57 V for a high current density of 50 mA cm^-2 . These results indicate the promising application potential of FeCoNiS_x /NF electrode for hydrogen generation. This work provides a new approach to develop robust hybrid materials as the highly active electrode for electrocatalytic water splitting.

Removal of Carbamazepine in Aqueous Solution by CoS2/Fe2+/PMS Process

Carbamazepine (CBZ), as a typical pharmaceutical and personal care product (PPCP), cannot be efficiently removed by the conventional drinking water and wastewater treatment process. In this work, the CoS2/Fe2+/PMS process was applied for efficient elimination of CBZ. The CBZ removal efficiency of CoS2/Fe2+/PMS was 2.5 times and 23 times higher than that of CoS2/PMS and Fe2+/PMS, respectively. The intensity of DMPO-HO• and DMPO-SO4•− followed the order of Fe2+/PMS < CoS2/PMS < CoS2/Fe2+/PMS, also suggesting the CoS2/Fe2+/PMS process has the highest oxidation activity. The effects of reaction conditions (e.g., CoS2 dosage, Fe2+ concentration, PMS concentration, initial CBZ concentration, pH, temperature) and water quality parameters (e.g., SO42−, NO3−, H2PO4−, Cl−, NH4+, humic acid) on the degradation of CBZ were also studied. Response surface methodology analysis was carried out to obtain the best conditions for the removal of CBZ, which are: Fe2+ = 70 µmol/L, PMS = 240 µmol/L, CoS2 = 0.59 g/L. The sustainability test demonstrated that the repeated use of CoS2 for 8 successive cycles resulted in little function decrease (<10%). These findings suggest that CoS2/Fe2+/PMS may be a promising method for advanced treatment of tailwater from sewage treatment plant.

Hollow Capsule NiCo2 NS Prepared by Self-Sacrificing Template Method for High-Efficiency Bifunctional Catalyst and Its Application in Zn-Air Battery

Exploring the application of high-efficiency bifunctional oxygen catalysts to rechargeable zinc-air batteries has been a research hotspot in recent years. We succeeded in obtaining NiCo₂ NS with a hollow capsule structure through the self-sacrificing template method, which has a larger specific surface area and can provide more active sites for electrocatalysis relative to his solid. The introduction of S can change the valence distribution of N and the electronic structure of the M-N bond, so that NiCo₂ NS exhibits excellent performance in the overpotential and stability of the oxygen reduction and oxygen evolution reactions. It shows an overpotential of 154 mV at 10 mA cm^-2 and a half-wave potential of 0.76 V. When used as a bi-functional catalyst in zinc-air batteries, it exhibits good stability within 400 h. The flexible battery assembled by NiCo₂ NS also shows excellent performance, and can be cycled stably for 20 h. The current maintains good stability when it is bent at different angles during the cycle.

Transition Metal Engineering of Molybdenum Disulfide Nanozyme for Biomimicking Anti-Biofouling in Seawater

Nature has evolved diverse strategies to battle surface biofouling colonization and thus provides us novel insights into designing and developing advanced nontoxic antibiofouling materials and technologies. Mimicking the defense mechanisms of natural haloperoxidases in marine algae in response to biofilm colonization, here we show that the less active MoS₂ shows efficient haloperoxidase-mimicking activity through judicious transition metal engineering. Cobalt-doped MoS₂ (Co-MoS₂) displays an excellent haloperoxidase-mimicking performance in catalyzing the Br^- oxidation into germicidal HOBr, roughly 2 and 23 times higher than the nickel-doped MoS₂ and pristine MoS₂, respectively. Accordingly, Co-MoS₂ shows an outstanding antimicrobial effect against drug-resistant bacteria and antibiofouling performance in real field tests in marine environments. The realization of robust haloperoxidase-mimicking activity of MoS₂ via metal engineering may open a new avenue to design highly active transition metal dichalcogenides for antibacterial and antibiofouling applications.

The controlled synthesis of nitrogen and iron co-doped Ni3S2@NiP2 heterostructures for the oxygen evolution reaction and urea oxidation reaction

At present, global resources are nearly exhausted and environmental pollution is becoming more and more serious, so it is urgent to develop efficient catalysts for hydrogen production. Herein, nitrogen and iron co-doped Ni₃S₂ and NiP₂ heterostructures with high efficiency oxygen evolution reaction (OER) and urea oxidation reaction (UOR) performances were firstly successfully prepared on nickel foam by hydrothermal and high-temperature calcination methods. Benefiting from the hierarchical structure, the exposure of more active sites and the doping effect of N and Fe, the N-Fe-Ni₃S₂@NiP₂/NF material showed excellent electrocatalytic activity for the OER and UOR. The N-Fe-Ni₃S₂@NiP₂/NF material displays excellent catalytic OER performance; the overpotential is only 251 mV to drive 100 mA cm^-2 current density, while for the UOR, the potential is only 1.353 V to drive 100 mA cm^-2 current density, which is one of the best catalytic activities reported so far. It is worth noting that scanning electron microscopy showed that the surface of N-Fe-Ni₃S₂@NiP₂/NF is rough and has some mesopores, which may have resulted in an increase of active sites during the electrocatalytic process. The N-Fe-Ni₃S₂@NiP₂/NF electrode couple also has relatively long-term durability in alkaline solutions, maintaining a stable current density for 15 h at 1.35 V. The density functional theory (DFT) calculation shows that the in situ generated Fe doped nanooxides exhibit strong water adsorption energy, which may be one of the reasons for the good catalytic activity. Our work is conducive to the rational design of electrocatalysts for efficient hydrogen production from water splitting and wastewater treatment.

Accelerating hydrazine-assisted hydrogen production kinetics with Mn dopant modulated CoS2 nanowire arrays

The designed Mn-modified CoS2 catalyst exhibits outstanding bifunctional electrocatalytic performances toward hydrogen evolution reaction and hydrazine oxidation reaction for high-efficiency energy-saving H2 production by water-assisted electrolysis.

Porous Cobalt Sulfide Selenium Nanorods for Electrochemical Hydrogen Evolution

A key process in electrochemical energy technology is hydrogen evolution reaction (HER). However, its electrochemical properties mainly depend on the catalytic activity of the material itself. Therefore, it is important to find efficient electrocatalysts to realize clean hydrogen production. As a typical kind of catalytic materials, transition metal dichalcogenides (TMCs) play important roles in the field of energy catalysis. As a representative of TMCs, cobalt disulfide (CoS₂), recently has raised much research interest owing to its abundant reserves, environmental friendliness, and excellent electrochemical stability. Meanwhile, given the fact that doping is one of the effective methods to improve the electrochemical catalytic property, various means of doping have been researched. Here, we report for the first time that porous-like Se-CoS_2-x (or Se:CoS_2-x ) nanorod can be facilely synthesized via a controllable two-step strategy. It is demonstrated that doping Se can greatly improve the catalytic performance of CoS₂ electrode. The electrode can obtain a current density of 10 mA cm^-2 at overpotential of only ∼260 mV. And the current changes with the applied bias voltage in an obvious stepped pattern, in the chronopotential (CP) curve of Se-CoS_2-x , indicating its outstanding mass transfer property and mechanical stability.

Activating Basal Surface of Palladium by Electronic Modulation via Atomically Dispersed Nitrogen Doping for High-Efficiency Hydrogen Evolution Reaction

Surface doping by atomically dispersed heteroatoms has become one of the most promising strategies for facilitating the catalytic activity of non-noble transition metals to replace platinum-based catalysts in the hydrogen evolution reaction (HER). However, the underlying mechanism for the atomically dispersed heteroatoms to modulate the electronic structure and the HER activity of a metal surface is still ambiguous. Moreover, the active catalytic region is limited by the small fraction of doped atoms, and the remaining basal surface is inactivated. Here, we demonstrate that the nitrogen doping is atomically dispersed on the palladium surface, which can achieve the near-thermoneutral hydrogen adsorption and promote the HER activity of the basal surface. The theoretical modeling reveals that the dispersed nitrogen atoms attract electrons from palladium and downdrift the d-band center for accelerating the hydrogen desorption. Our work offers understandings of atomically dispersed nitrogen doping on the surface of transition metals and paves the way for a further optimization of nonprecious-metal HER electrocatalysts.

Dual Vacancies Confined in Nickel Phosphosulfide Nanosheets Enabling Robust Overall Water Splitting

Exploring highly efficient electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) is of great significance for addressing energy and environmental crises. Vacancy engineering has been regarded as a promising way to optimize the catalytic activity of electrocatalysts. Herein, we put forward a conceptually new dual Ni,S vacancy engineering on 2D NiPS₃ nanosheet (denoted as V-NiPS₃ ) by a simple ball-milling treatment with ultrasonication. This material presents an ideal model for exploring the role of dual vacancies in improving the catalytic activity for overall water splitting. Structural analyses make clear that the formation of dual Ni,S vacancies regulates the electronic structure and catalytic active sites of NiPS₃ nanosheet, leading to the superior HER/OER performance. Smaller overpotentials of 124 mV and 290 mV can be achieved at a current density of 10 mA cm^-2 for HER and OER, respectively. The OER performance of V-NiPS₃ is the best value among all state-of-the-art NiPS₃ catalysts. In addition, the assembled two-electrode cell incorporating V-NiPS₃ exhibits enhanced catalytic performance with a low cell voltage of 1.60 V at 10 mA cm^-2 . This work offers a promising avenue to improve the electrocatalytic performance of the catalysts by engineering dual vacancies for large-scale water splitting.

Unravelling the Role of Strong Metal-Support Interactions in Boosting the Activity toward Hydrogen Evolution Reaction on Ir Nanoparticle/N-Doped Carbon Nanosheet Catalysts

Pt-based catalysts are commercial electrocatalysts for the hydrogen evolution reaction (HER), but their shortcomings of expensive and imperfect efficiency hinder their large-scale application. Here, we report an Ir-based HER catalyst supported by N-doped carbon nanosheets (Ir-NCNSs). The NCNSs, with a high surface area and unique atomic composition, enable Ir nanoparticles (NPs) to disperse at 2-3 nm and strongly coordinate to the Ir through Ir-N bonds, which exposes many active sites and strengthens their durability. The catalyst displays a low overpotential and a small Tafel slope of 46.3 mV at 10 mA cm^-2 and 52 mV dec^-1 in 0.5 M H₂SO₄, respectively. When used in 1.0 M KOH, Ir-NCNSs also show excellent electrocatalytic activity with a low overpotential of 125 mV at 10 mA cm^-2. The calculated results further suggest that Ir NPs and NCNSs have excellent selectivity for strong metal-support interactions, corresponding to a significant and stable HER characteristic. Our findings provide insight into the design of high-efficiency Ir-based HER catalysts.

A Co-MOF-derived flower-like CoS@S,N-doped carbon matrix for highly efficient overall water splitting

In this study, we constructed a highly effective, low-cost, non-noble-metal-based electrocatalyst to replace Pt catalysts, with a CoS@SNC catalyst being successfully synthesized. The obtained nanocatalyst was characterized via scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, powder X-ray diffraction studies, and X-ray photoelectron spectroscopy. Herein, an initially prepared N-containing Co MOF formed flower-like particles, which were obtained via a solvothermal method; further it was used for a sulfuration process as a template to achieve an S,N (heteroatom)-doped carbon electrocatalyst with embedded CoS (CoS@SNC). The synthesized flower-like CoS@SNC electrocatalyst derived from a novel MOF showed a uniform distribution of Co, S, N, and C at the molecular level in the MOF and it was rich in active sites, facilitating enhanced electrocatalytic performance. During the HER and OER in 0.1 M KOH solution, to reach a current density of 10 mA cm⁻², lower overpotentials of −65 mV and 265 mV, respectively, were required and Tafel slopes of 47 mV dec⁻¹ and 59.8 mV dec⁻¹, respectively, were seen. In addition, due to a synergistic effect between CoS and the S,N-doped carbon matrix, long-term durability and stability were obtained. This facile synthetic strategy, which is also environmentally favorable, produces a promising bifunctional electrocatalyst.

In this study, we constructed a highly effective, low-cost, non-noble-metal-based electrocatalyst to replace Pt catalysts, with a CoS@SNC catalyst being successfully synthesized.

Cation Modulation of Cobalt Sulfide Supported by Mesopore-Rich Hydrangea-Like Carbon Nanoflower for Oxygen Electrocatalysis

Transition-metal sulfide is pursued for replacing scare platinum-group metals for oxygen electrocatalysis and is of great importance in developing low-cost, high-performance rechargeable metal-air batteries. We report herein a facile cationic-doping strategy for preparing nickel-doped cobalt sulfide embedded into a mesopore-rich hydrangea-like carbon nanoflower. Nickel cations are introduced to induce the formation of Co³⁺-active species and more oxygen vacancies due to higher electronegativity and smaller ionic radius, thereby strengthening the intrinsic activity for oxygen electrocatalysis. Moreover, hydrangea-like superstructure composed of interconnected carbon cages provides abundant accessible active sites and hierarchical porosity. As a result, it shows excellent catalytic performance with a superior mass activity for the oxygen reduction reaction to the state-of-the-art Pt/C catalyst and a low overpotential of 314 mV at 10 mA cm^-2 for the oxygen evolution reaction. When used as an air cathode for the rechargeable Zn-air battery, it delivers a peak power density of 96.3 mW cm^-2 and stably operates over 214 h. This work highlights the importance of cationic doping in strengthening the electrocatalytic performance of 3d-transition-metal chalcogenides.

Heteroatom-Doping of Non-Noble Metal-Based Catalysts for Electrocatalytic Hydrogen Evolution: An Electronic Structure Tuning Strategy

Electrocatalytic water splitting for hydrogen production is an appealing way to reduce carbon emissions and generate renewable fuels. This promising process, however, is limited by its sluggish reaction kinetics and high-cost catalysts. Construction of low-cost and high-performance non-noble metal-based catalysts have been one of the most effective approaches to address these grand challenges. Notably, the electronic structure tuning strategy, which could subtly tailor the electronic states, band structures, and adsorption ability of the catalysts, has become a pivotal way to further enhance the electrochemical water splitting reactions based on non-noble metal-based catalysts. Particularly, heteroatom-doping plays an effective role in regulating the electronic structure and optimizing the intrinsic activity of the catalysts. Nevertheless, the reaction kinetics, and in particular, the functional mechanisms of the hetero-dopants in catalysts yet remains ambiguous. Herein, the recent progress is comprehensively reviewed in heteroatom doped non-noble metal-based electrocatalysts for hydrogen evolution reaction, particularly focus on the electronic tuning effect of hetero-dopants in the catalysts and the corresponding synthetic pathway, catalytic performance, and activity origin. This review also attempts to establish an intrinsic correlation between the localized electronic structures and the catalytic properties, so as to provide a good reference for developing advanced low-cost catalysts.

A “Superaerophobic” Se-Doped CoS2 Porous Nanowires Array for Cost-Saving Hydrogen Evolution

The pursuit of low-cost and high-efficiency catalyst is imperative for the development and utilization of hydrogen energy. Heteroatomic doping which is conducive to the redistribution of electric density is one of the promising strategies to improve catalytic activity. Herein, the Se-doped CoS2 porous nanowires array with a superaerophobic surface was constructed on carbon fiber. Due to the electronic modulation and the unique superaerophobic structure, it showed improved hydrogen evolution activity and stability in urea-containing electrolyte. At a current density of 10 mA cm−2, the overpotentials are 188 mV for hydrogen evolution reaction (HER) and 1.46 V for urea oxidation reaction (UOR). When it was set as a cell, the voltage is low as 1.44 V. Meanwhile, the current densities of HER and UOR, as well as of cell remained basically unchanged after a continuous operation for 48 h. This work opens up a new idea for designing of cost-saving hydrogen evolution electrocatalysts.

Optimized hierarchical nickel sulfide as a highly active bifunctional catalyst for overall water splitting

Rational design of non-noble metal electrocatalysts with high intrinsic activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is extremely impressive for sustainable electrocatalytic water splitting systems. However, it still remains a major challenge to engineer bifunctional performance. Here, we put forward a highly efficient water electrolyzer based on Ni3S2-based materials. The hierarchical structure of Ni3S2 can be well regulated for optimizing the HER catalytic activity. The best c-Ni3S2/NF electrode exhibits a much smaller overpotential of 220 mV to reach the current density of 100 mA cm-2. Upon introducing Fe species onto the Ni3S2/NF electrode by a simple dipping/drying method, the intrinsic OER activity can be extremely improved. As a result, the Fe-c-Ni3S2/NF catalyst showed excellent catalytic activity for the OER, including an overpotential of 193 mV at 10 mA cm-2, high specific current density and excellent stability. Post-characterization studies proved that the remaining S anions have an effective influence on improving the OER intrinsic activity. The assembled water electrolyzer also presented superior performance, such as a very low cell voltage of 1.50 V at 10 mA cm-2 and excellent durability for 120 h in alkaline medium. This strategy provides a promising way to design highly active and low-cost materials for overall water electrolysis.

Effect of Few-Layer Ti3C2Tx Supported Nano-Ni via Self-Assembly Reduction on Hydrogen Storage Performance of MgH2

For the first time, few-layer Ti₃C₂T_x (FL-Ti₃C₂T_x) supporting highly dispersed nano-Ni particles with an interconnected and interlaced structure was elaborated through a self-assembly reduction process. FL-Ti₃C₂T_x not only acts as a supporting material but also self-assembles with Ni²⁺ ions through the electrostatic interaction, assisting in the reduction of nano-Ni. After ball milling with MgH₂, Ni₃₀/FL-Ti₃C₂T_x (few-layer Ti₃C₂T_x supported 30 wt % nano-Ni via self-assembly reduction) shows superior catalytic activity for MgH₂. For example, MgH₂-5 wt % Ni₃₀/FL-Ti₃C₂T_x can release approximately 5.83 wt % hydrogen within 1800 s at 250 °C and absorb 5 wt % hydrogen within 1700 s at 100 °C. The combined effects of finely dispersed nano-Ni in situ-grown on FL-Ti₃C₂T_x, large specific area of FL-Ti₃C₂T_x, multiple-valence Ti (Ti⁴⁺, Ti³⁺, Ti²⁺, and Ti⁰) derived from FL-Ti₃C₂T_x, and the electronic interaction between Ni and FL-Ti₃C₂T_x can explain the superb hydrogen storage performance. Our results will attract more attention to the elaboration of the metal/FL-Ti₃C₂T_x composite via self-assembly reduction and provide a guideline to design high-efficiency composite catalysts with MXene in hydrogen storage fields.

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal-organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm^-2 for the HER and 329 mV at 50 mA cm^-2 for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm^-2 for overall water splitting.

Favorable Amorphous-Crystalline Iron Oxyhydroxide Phase Boundaries for Boosted Alkaline Water Oxidation

Interface engineering has proven an effective strategy for designing high-performance water-oxidation catalysts. Interface construction combining the respective advantages of amorphous and crystalline phases, especially embedding amorphous phases in crystalline lattices, has been the focus of intensive research. This study concerns the construction of an amorphous-crystalline FeOOH phase boundary (a-c-FeOOH) by structural evolution of iron oxyhydroxide-isolated Fe(OH)₃ precursors from one-step hydrothermal synthesis. a-c-FeOOH demonstrates superb electrocatalytic activity for the oxygen evolution reaction (OER) with overpotential of 330 mV to drive a current density of 300 mA cm^-2 in 1.0 m KOH, which is among the best OER catalysts and much better than the pristine amorphous or crystalline FeOOH alone. Density functional theory calculations reveal that the high-density a-c phase boundaries play a critical role in determining high OER activity.

Nitrogen-Incorporated Cobalt Sulfide/Graphene Hybrid Catalysts for Overall Water Splitting

Water electrolysis is an advanced and sustainable energy conversion technology used to generate H₂ . However, the low efficiency of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hampers the overall water-splitting catalytic performance. Here, a hybrid catalyst was constructed from N-doped CoS₂ nanoparticles on N,S-co-doped graphene nanosheets (N-CoS₂ /G) using a facile method, and the catalyst exhibited excellent bifunctional activity. Introduction of N atoms not only promoted the adsorption of reaction intermediates, but also bridged the CoS₂ nanoparticles and graphene to improve electron transfer. Moreover, using thiourea as both N- and S-source ensured synthesis of much smaller-sized nanoparticles with more surface active sites. Surprisingly, the N-CoS₂ /G exhibited superior catalytic activity with a low overpotential of 260 mV for the OER and 109 mV for the HER at a current density of 10 mA cm^-2 . The assembled N-CoS₂ /G : N-CoS₂ /G electrolyzer substantially expedited overall water splitting with a voltage requirement of 1.58 V to reach 10 mA cm^-2 , which is superior to most reported Co-based bifunctional catalysts and other non-precious-metal catalysts. This work provides a new strategy towards advanced bifunctional catalysts for water electrolysis.

Surface Nitrogen-Injection Engineering for High Formation Rate of CO2 Reduction to Formate

In this study, we highlight that surface nitrogen-injection engineering brings a high formation rate for CO₂ reduction to formate, which is high level among the reported electrocatalysts. Surface nitrogen-injection engineering can increase the amounts of active sites and optimize the electronic structure simultaneously. Taking an example of SnS₂ precursors, the final-obtained surface N-enriched Sn(S) nanosheets (denoted as N-Sn(S) nanosheets) exhibit a 5-fold of current density and 2.45-fold of Faradaic efficiency than pristine SnS₂ derived Sn(S) nanosheets (denoted as Sn(S) nanosheets). On account of high activity and selectivity, the formation rate of formate is 14 times than that of pristine samples and reaches up to 1358 μmol h^-1 cm^-2. Moreover, this strategy is proven to be general to other metal sulfides, such as CuS and In₂S₃. We anticipate that surface nitrogen-injection engineering offers new avenues to rational design of advanced electrocatalysts for CO₂ reduction reaction.

Optimized electronic structure and p-band centre control engineering to enhance surface absorption and inherent conductivity for accelerated hydrogen evolution over a wide pH range

Numerous experiments have demonstrated that an appropriate electronic configuration can effectively activate the electrocatalytic activity. However, systematic studies on the effects of non-metallic elemental doping and its p-orbital center (εp) on electrocatalysis have not yet been carried out. Combining theoretical and experimental methods, we demonstrate an electronic configuration and p-orbital center control engineering for promoting the HER course in both acid and alkaline solutions over group VA elements doped into the inert basal plane of nanoMoS2. In acidic solutions, As-doped MoS2 has the best electrocatalytic activity. Theoretically, the calculated ΔGH of the As atom is only -0.07 eV, indicating that it has excellent catalytic performance. Furthermore, the p-orbital center under and near the Fermi level plays a significant role in the H adsorption course, and the closer the εp value is to the Fermi level, the weaker the H- non-metallic atom bond is. An appropriate εp can insure a proper strength of bond with H and further influence the catalytic activity of the HER. In alkaline solutions, P-doped MoS2 has the best electrocatalytic activity, which is due to the engineering of water dissociation sites by doping P atoms into MoS2 nanosheets. These findings pave the path to develop a rational strategy to trigger the activity of the inert basal plane of MoS2, to enhance the conductivity of inherent MoS2 towards the HER and provide a new idea that can be extended to other layered dichalcogenides.

Interface Catalysts of Ni/Co2N for Hydrogen Electrochemistry

The development of active, durable, and nonprecious electrocatalysts for hydrogen electrochemistry is highly desirable but challenging. In this work, we design and fabricate a novel interface catalyst of Ni and Co₂N (Ni/Co₂N) for hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR). The Ni/Co₂N interfacial catalysts not only achieve a current density of -10.0 mA cm^-2 with an overpotential of 16.2 mV for HER but also provide a HOR current density of 2.35 mA cm^-2 at 0.1 V vs reversible hydrogen electrode (RHE). Furthermore, the electrode couple made of the Ni/Co₂N interfacial catalysts requires only a cell voltage of 1.57 V to gain a current density of 10 mA cm^-2 for overall water splitting. Hybridizations in the three elements of Ni-3d, N-2p, and Co-3d result in charge transfer in the interfacial junction of the Ni and Co₂N materials. Our density functional theory calculations show that both the interfacial N and Co sites of Ni/Co₂N prefer to hydrogen adsorption in the hydrogen catalytic activities. This study provides a new approach for the construction of multifunctional catalysts for hydrogen electrochemistry.

Turning Waste into Treasure: Regulating the Oxygen Corrosion on Fe Foam for Efficient Electrocatalysis

Iron corrosion causes a great damage to the economy due to the function attenuation of iron-based devices. However, the corrosion products can be used as active materials for some electrocatalytic reactions, such as oxygen evolution reaction (OER). Herein, the oxygen corrosion on Fe foams (FF) to synthesize effective self-supporting electrocatalysts for OER, leading to "turning waste into treasure," is regulated. A dual chloride aqueous system of "NaCl-NiCl₂ " is employed to tailor the structures and OER properties of corrosion layers. The corrosion behaviors identify that Cl^- anions serve as accelerators for oxygen corrosion, while Ni²⁺ cations guarantee the uniform growth of corrosion layers owing to the appeared chemical plating. The synergistic effect of "NaCl-NiCl₂ " generates one of the highest OER activities that only an overpotential of 212 mV is required to achieve 100 mA cm^-2 in 1.0 m KOH solution. The as-prepared catalyst also exhibits excellent durability over 168 h (one week) at 100 mA cm^-2 and promising application for overall water splitting. Specially, a large self-supporting electrode (9 × 10 cm² ) is successfully synthesized via this cost-effective and easily scale-up approach. By combining with corrosion science, this work provides a significant stepping stone in exploring high-performance OER electrocatalysts.

Optimized Metal Chalcogenides for Boosting Water Splitting

Electrocatalytic water splitting (2H2O → 2H2 + O2) is a very promising avenue to effectively and environmentally friendly produce highly pure hydrogen (H2) and oxygen (O2) at a large scale. Different materials have been developed to enhance the efficiency for water splitting. Among them, chalcogenides with unique atomic arrangement and high electronic transport show interesting catalytic properties in various electrochemical reactions, such as the hydrogen evolution reaction, oxygen evolution reaction, and overall water splitting, while the control of their morphology and structure is of vital importance to their catalytic performance. Herein, the general synthetic methods are summarized to prepare metal chalcogenides and different strategies are designed to improve their catalytic performance for water splitting. The remaining challenges in the research and development of metal chalcogenides and possible directions for future research are also summarized.

Achieving Efficient Alkaline Hydrogen Evolution Reaction over a Ni5 P4 Catalyst Incorporating Single-Atomic Ru Sites

Developing efficient electrocatalysts for alkaline water electrolysis is central to substantial progress of alkaline hydrogen production. Herein, a Ni₅ P₄ electrocatalyst incorporating single-atom Ru (Ni₅ P₄ -Ru) is synthesized through the filling of Ru³⁺ species into the metal vacancies of nickel hydroxides and subsequent phosphorization treatment. Electron paramagnetic resonance spectroscopy, X-ray-based measurements, and electron microscopy observations confirm the strong interaction between the nickel-vacancy defect and Ru cation, resulting in more than 3.83 wt% single-atom Ru incorporation in the obtained Ni₅ P₄ -Ru. The Ni₅ P₄ -Ru as an alkaline hydrogen evolution reaction catalyst achieves low onset potential of 17 mV and an overpotential of 54 mV at a current density of 10 mA cm^-2 together with a small Tafel slope of 52.0 mV decade^-1 and long-term stability. Further spectroscopy analyses combined with density functional theory calculations reveal that the doped Ru sites can cause localized structure polarization, which brings the low energy barrier for water dissociation on Ru site and the optimized hydrogen adsorption free energy on the interstitial site, well rationalizing the experimental reactivity.

A robust host-guest interaction controlled probe immobilization strategy for the ultrasensitive detection of HBV DNA using hollow HP5-Au/CoS nanobox as biosensing platform

The combination of supramolecular chemistry and nanotechnology has potentially applied in the construction of biosensors, and thus improves the analytical performance and robustness of electron devices. Herein, a new sandwich-type DNA sensor was constructed for ultrasensitive determination of hepatitis B virus (HBV) DNA, a recognized marker for chronic hepatitis B. The water-soluble pillar[5]arene stabilized Pd NPs combined with reduced graphene oxide nanosheet (WP5-Pd/RGO) was synthesized and employed as supporting material for the modification of electrode surface. The probe DNA was immobilized onto the electrode surface through a new strategy based on the host-guest interaction between WP5 and methylene blue labeled DNA (MB-DNA). Moreover, MOF-derived cobalt sulfide nanobox was prepared to anchor the hydroxylatopillar[5]arene stabilized Au NPs (HP5-Au/CoS), which had superior electrocatalytic performance towards H₂O₂ reduction to achieve signal amplification. Under the optimized conditions, the proposed sensor displayed a linear relationship between amperometric currents and the logarithm of tDNA solution from 1 × 10^-15 mol/L to 1 × 10^-9 mol/L, and a low detection limit of 0.32 fmol/L. What's more, the DNA sensor had remarkable behaviors of stability, reproducibility, specificity, and accuracy, which provided a potential and promising prospect for clinical diagnosis and analysis.

Confinement of fluorine anions in nickel-based catalysts for greatly enhancing oxygen evolution activity

A simple fluorine treatment was developed to confine abundant fluorine anions into Ni-based catalysts to greatly enhance OER catalytic activity.

An Interfacial Electron Transfer on Tetrahedral NiS2 /NiSe2 Heterocages with Dual-Phase Synergy for Efficiently Triggering the Oxygen Evolution Reaction

Tetrahedral NiS₂ /NiSe₂ heterocages with rich-phase boundaries are synthesized through a simultaneous sulfuration/selenylation process using Ni-based acetate hydroxide prisms as precursor. Such a nanocage-like NiS₂ /NiSe₂ heterostructure can expose more active sites, accelerate the mass transport of the ions/gas, and optimize the interfacial electronic structure, which shows a significantly lower overpotential of 290 mV at 20 mA cm^-2 than those of NiS/NiS₂ and NiSe₂ as counterparts. The experimental characterizations and theoretical density functional theory (DFT) calculations unveil that the interfacial electron transfer from NiSe₂ to NiS₂ at the heterointerface can modulate the electronic structure of NiS₂ /NiSe₂ , which further cooperates synergistically to change the Gibbs free energy of oxygen-containing intermediates as the rate-determining step (RDS) from 2.16 eV (NiSe₂ ) and 2.10 eV (NiS₂ ) to 1.86 eV (NiS₂ /NiSe₂ heterostructures) during the oxygen evolution reaction (OER) process. And as a result, tetrahedral NiS₂ /NiSe₂ heterocages with dual-phase synergy efficiently trigger the OER process, and accelerate the OER kinetics. This work provides insights into the roles of the interfacial electron transfer in electrocatalysis, and can be an admirable strategy to modulate the electronic structure for developing highly active electrocatalysts.

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3 S2 /N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃ S₂ /N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃ S₂ /N-MoS₂ /NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄ /NF) as the starting material. With the in situ generation of Ni₃ S₂ /MoS₂ heterointerfaces within nanowires and the incorporation of N^- anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃ S₂ /N-MoS₂ /NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃ S₂ /N-MoS₂ /NF enable it to effectively catalyze the overall water-splitting reaction.

Adjustable Ternary FeCoNi Nanohybrids for Enhanced Oxygen Evolution Reaction

Water splitting as a greatly desired technology to produce clean renewable energy, but is hampered by the sluggish oxygen evolution reaction. So, the development of highly active and durable water oxidation electrocatalysts is of primarily significance for energy conversion. Here, a facial strategy to synthesize FeCoNi nanohybrids with adjustable morphological structures by using fluorine is introduced. The morphology and electrocatalytic activity of the sample is determined by the innovative introduction of fluorine. Among them, the overpotential at 10 mA cm^-2 of the best sample is approximately 97 mV lower than the commercial RuO₂ toward the oxygen evolution reaction in 1 m KOH. Additionally, the catalysts also have low Tafel slopes and remarkable stability.