Expanding the Color Space in the Two-Color Heterogeneous Photocatalysis of Ullmann C–C Coupling Reactions

Modern organic transformations: heterogeneous thermocatalysis or photocatalysis?

Organic transformation driven by heterogeneous catalysis is of crucial significance in both fundamental research and modern industrial production of fine chemicals. Thermocatalysis offers excellent applications due to its high activity and excellent scalability, yet still faces significant challenges toward the goals of high efficiency, energy-saving and sustainability. Recently, photocatalysis has emerged as a promising alternative for addressing these issues in a green and economical manner. In practice, the selection of an appropriate catalytic system is a critical factor that can influence the chemical process on multiple levels significantly. In this review, we aim to present a tutorial demonstration about the critical comparison between thermo- and photocatalytic terms for organic transformation. We begin by outlining the basic principles in thermo- and photocatalytic fundamentals, together with summarizing the general advantages and disadvantages of each. Subsequently, given the high sustainability and potentiality exhibited by the photocatalytic process, we present its representative applications including oxidation, reduction, coupling, and cleavage series. The general reaction conditions and activities observed in thermocatalysis for similar reactions are also introduced for comparison. The understanding of reaction mechanisms and the resulting regulations toward activity and selectivity are specifically discussed. Finally, future perspectives of heterogeneous photocatalytic terms for practical applications are elucidated.

Light switching for product selectivity control in photocatalysis

Artificial switchable catalysis is a new, rapidly expanding field that offers great potential advantages for both homogeneous and heterogeneous catalytic systems. Light irradiation is widely accepted as the best stimulus to artificial switchable chemical systems. In recent years, tremendous progress has been made in the synthesis and application of photo-switchable catalysts that can control when and where bond formation and dissociation take place in reactant molecules. Photo-switchable catalysis is a niche area in current catalysis, on which systematic analysis and reviews are still lacking in the scientific literature, yet it offers many intriguing and versatile applications, particularly in organic synthesis. This review aims to highlight the recent advances in photo-switchable catalyst systems that can result in two different chemical product outcomes and thus achieve a degree of control over organic synthetic reactions. Furthermore, this review evaluates different approaches that have been employed to achieve dynamic control over both the catalytic function and the selectivity of several different types of synthesis reactions, along with the remaining challenges and potential opportunities. Owing to the great diversity of the types of reactions and conditions adopted, a quantitative comparison of efficiencies between considered systems is not the focus of this review, instead the review showcases how insights from successful adopted strategies can help better harness and channel the power of photoswitchability in this new and promising area of catalysis research.

Visible-Light Photocatalytic Reduction of Aryl Halides as a Source of Aryl Radicals

Aryl- and heteroaryl units are present in a wide variety of natural products, pharmaceuticals, and functional materials. The method for reduction of aryl halides with ubiquitous distribution is highly sought after for late-stage construction of various aromatic compounds. The visible-light-driven reduction of aryl halides to aryl radicals by electron transfer provides an efficient, simple, and environmentally friendly method for the construction of aromatic compounds. This review summarizes the recent progress in the generation of aryl radicals by visible-light-driven reduction of aryl halides with metal complexes, organic compounds, semiconductors as catalysts, and alkali-assisted reaction system. The ability and mechanism of reduction of aromatic halides in various visible light induced systems are summarized, intending to illustrate a comprehensive introduction of this research topic to the readers.

Surface-Plasmon-Enhanced Transmetalation between Copper and Palladium Nanoparticle Catalyst

Surface-plasmon-mediated phenylacetylide intermediate transfer from the Cu to the Pd surface affords a novel mechanism for transmetalation, enabling wavelength-tunable cross-coupling and homo-coupling reaction pathway control. C-C bond forming Sonogashira coupling and Glaser coupling reactions in O2 atmosphere are efficiently driven by visible light over heterogeneous Cu and Pd nanoparticles as a mixed catalyst without base or other additives. The reaction pathway can be controlled by switching the excitation wavelength. Shorter wavelengths (400-500 nm) give the Glaser homo-coupling diyne, whereas longer wavelength irradiation (500-940 nm) significantly increases the degree of cross-coupling Sonogashira coupling products. The ratio of the activated intermediates of alkyne to the iodobenzene is wavelength dependent and this regulates transmetalation. This wavelength-tunable reaction pathway is a novel way to optimize the product selectivity in important organic syntheses.

One-Dimensional Organic Conjugated Polymers as Recyclable Heterogeneous Photocatalysts

Organic conjugated polymers with long-range conjugation generally have strong light absorption capacity in visible light region and impressive performance in charge transfer, which endows them great application potential in the field of opto-electronic materials. But there are few reports on their use in photocatalytic reactions. At present, it has been reported that a variety of donor-acceptor (D-A) type organic dyes can be used in efficient organic photocatalytic transformations. We designed and synthesized one-dimensional organic conjugated polymers pPhCzBP-Th and pPhCzBP-DTh with D-A structure, and proved that they are good heterogeneous photo-redox catalysts, which can photocatalyze hydrodehalogenation reduction of α-bromoacetophenone and its derivatives. Due to the strong reducibility of the excited state, pPhCzBP-Th can also efficiently reduce α-chloroacetophenone. Furthermore, by simply wrapping the catalyst powder, high-efficient separation of products and catalysts recycling can be achieved.

A General, Multimetallic Cross-Ullmann Biheteroaryl Synthesis from Heteroaryl Halides and Heteroaryl Triflates

Despite their importance to medicine and materials science, the synthesis of biheteroaryls by cross-coupling remains challenging. We describe here a new, general approach to biheteroaryls: the Ni- and Pd-catalyzed multimetallic cross-Ullmann coupling of heteroaryl halides with triflates. An array of 5-membered, 6-membered, and fused heteroaryl bromides and chlorides, as well as aryl triflates derived from heterocyclic phenols, proved to be viable substrates in this reaction (62 examples, 63 ± 17% average yield). The generality of this approach to biheteroaryls was further demonstrated in 96-well plate format at 10 μmol scale. An array of 96 possible products provided >90% hit rate under a single set of conditions. Further, low-yielding combinations could be rapidly optimized with a single "Toolbox Plate" of ligands, additives, and reductants.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Efficient photocatalytic chemoselective and stereoselective C–C bond formation over AuPd@N-rich carbon nitride

High unsymmetrical chemoselective Ullmann biaryl products and satisfactory Z-type stereoselective Heck reaction products could be achieved through changing the visible light color over AuPd@N-Rich carbon nitride under mild conditions.

A photoredox catalysed Heck reaction via hole transfer from a Ru(ii)-bis(terpyridine) complex to graphene oxide

The attachment of homoleptic Ru bis-terpy complexes on graphene oxide significantly improved the photocatalytic activity of the complexes. These straightforward complexes were applied as photocatalysts in a Heck reaction. Due to covalent functionalization on graphene oxide, which functions as an electron reservoir, excellent yields were obtained. DFT investigations of the charge redistribution revealed efficient hole transfer from the excited Ru unit towards the graphene oxide.

Glass wool supported ruthenium complexes: versatile, recyclable heterogeneous photoredox catalysts

Versatile and recyclable heterogeneous photocatalysts based on the use of glass wool supported ruthenium complexes and organic dyes.

Investigation of copper oxidation states in plasmonic nanomaterials by XAS and Raman spectroscopy

A shell-isolated nanoparticle enhanced surface Raman technique and XANES for detection of copper(ii) or copper(i) plasmonic-nanocatalysts.

A green road map for heterogeneous photocatalysis

In the new millennium the well-established paradigms of organic photochemistry have come alive as the basis for a wide range of synthetic methodologies that take advantage of the enhanced redox properties of excited states. While many strategies have been developed using rare, expensive and non-reusable catalysts, the road forward should include catalysts based on more abundant elements and reusable materials. This green road leads to the exploration of heterogeneous systems that can be eventually adapted for flow photocatalysis, and also adopted for the solution of environmental problems such as water treatment and fuel generation using solar radiation. If heterogeneous photocatalysis can play a role in supplying solutions to drug synthesis, energy and potable water supplies, then photochemistry will have an unprecedented societal impact.

Highly Electrophilic Titania Hole as a Versatile and Efficient Photochemical Free Radical Source

Photogenerated holes in nanometric semiconductors, such as TiO₂, constitute remarkable powerful electrophilic centers, capable of capturing an electron from numerous donors such as ethers, or nonactivated substrates like toluene or acetonitrile, and constitute an exceptionally clean and efficient source of free radicals. In contrast with typical free radical precursors, semiconductors generate single radicals (rather than pairs), where the precursors can be readily removed by filtration or centrifugation after use, thus making it a convenient tool in organic chemistry. The process can be described as an example of dystonic proton coupled electron transfer.

Catalytic farming: reaction rotation extends catalyst performance

The use of heterogeneous catalysis has key advantages compared to its homogeneous counterpart, such as easy catalyst separation and reusability. However, one of the main challenges is to ensure good performance after the first catalytic cycles. Active catalytic species can be inactivated during the catalytic process leading to reduced catalytic efficiency, and with that loss of the advantages of heterogeneous catalysis. Here we present an innovative approach in order to extend the catalyst lifetime based on the crop rotation system used in agriculture. The catalyst of choice to illustrate this strategy, Pd@TiO₂, is used in alternating different catalytic reactions, which reactivate the catalyst surface, thus extending the reusability of the material, and preserving its selectivity and efficiency. As a proof of concept, different organic reactions were selected and catalyzed by the same catalytic material during target molecule rotation.

Film formation from plasma-enabled surface-catalyzed dehalogenative coupling of a small organic molecule

This work demonstrates a new pathway to the direct on-surface fabrication of surface coatings by showing that application of a plasma can lead to dehalogenative coupling of small aromatic molecules at a catalytic surface. Specifically, we show that a room temperature, atmospheric pressure plasma can be used to fabricate a coating through a surface-confined dehalogenation reaction. Plasma treatments were performed using a dielectric barrier discharge (DBD) technique under pure nitrogen with a variety of power levels and durations. Samples were analysed by optical and helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS), optical profilometry, and contact angle measurement. By varying the plasma parameters we could control the chemistry, morphology and roughness of the film. Surface wettability also varied with the plasma parameters, with high-dose plasmas leading to a hydrophobic surface with water contact angles up to 130°.

New surface coating pathway by plasma-enabled surface-catalyzed reaction, offering control of surface chemistry, wettability and roughness.

Application of metal oxide semiconductors in light-driven organic transformations

Herein, we provide an up-to-date overview of metal oxide semiconductors (MOS) as versatile and inexpensive photocatalysts to enable light-driven organic transformations.

Photocatalytic Ullmann coupling of aryl halides by a novel blended catalyst consisting of a TiO2 photocatalyst and an Al2O3 supported Pd–Au bimetallic catalyst

Synergy of TiO₂ photocatalyst and Pd–Au bimetallic nanoparticles is essential for the efficient photocatalytic Ullmann coupling of aryl halides.